Professional Documents
Culture Documents
Plumbing Installation Techniques - IA - TLE
Plumbing Installation Techniques - IA - TLE
LOL🤣
INDUSTRIAL ARTS
Search . . .
PLUMBING
INSTALLATION
JUNA MARIE F. MANUEL
PRESENTATION BY:
Start Slide
INDUSTRIAL ARTS
P L U M B I N G I N S T A L L AT I O N
COGNITIVE
Demonstrate knowledge of safety protocols and
regulations related to plumbing installation, such as local
OBJECTIVES
PSYCHOMOTOR
These objectives encompass the cognitive, psychomotor, and
affective domains of learning, ensuring that students gain both Follow the correct installation techniques and steps in
knowledge and practical skills while fostering the right attitudes plumbing.
and values in plumbing installation within the context of
Technology and Livelihood Education.
AFFECTIVE
Develop a sense of responsibility for personal safety and
the safety of others when working on plumbing
Learn More
installations.
INDUSTRIAL ARTS
P L U M B I N G A N D I N S T A L L AT I O N T E C H N I Q U E S
• The drainpipes themselves lead away from all fixtures at a certain calculated slope
• If the slope is too steep, water will run off too fast, leaving solid particles behind
• If it's not steep enough, water and waste will drain too slowly and stay into the
fixture. The normal pitch is 1⁄4 inch for every horizontal foot pipe travel.
• Central to the DWV system is a soil stack, a vertical section of 3 or 4-inch-
diameter pipe that carries waste away from toilets (and often fixtures) and connects
with the main house drain in the basement or crawl space.
• The upper part of the stack serves as a vent. Secondary vents from other fixtures
can also be connected to it above the level of the highest fixture in the house (this is
called re- venting or back venting).
INDUSTRIAL ARTS
P L U M B I N G A N D I N S T A L L AT I O N T E C H N I Q U E S
P L U M B I N G A N D I N S T A L L AT I O N T E C H N I Q U E S
• For high hot water and high pressure gasses, the following materials and
specifications are used.
- Light-gauge copper tube
- Capillary fittings are suitable for the transmissions of hot and cold water, gas,
compressed air and other fluids.
- Capillary fittings are designed to give good flow characteristics which are easily
taken apart and are cheaper and less bulky than compression fittings.
INDUSTRIAL ARTS
P L U M B I N G I N S T A L L AT I O N
P L U M B I N G I N S T A L L AT I O N
CONCLUSION
Understanding plumbing installation techniques and steps is crucial
for students in Technology and Livelihood Education. By mastering
these skills, individuals can contribute to the construction and
maintenance of reliable plumbing systems, ensuring the efficient
distribution and disposal of water in various settings. Proper
training in plumbing installation techniques equips students with
valuable skills that are in demand across multiple industries.
INDUSTRIAL ARTS UP
Search . . .
THANK YOU