Professional Documents
Culture Documents
Hull design
Ken Youssefi
Introduction to Engineering, E10. 1
SolidWorks Sketch Commands
Rectangular and
Polar (circular) array
Drawing tools Modifying tools
Mirror
Spline Offset Constraints
Checks
Dimensioning Trim and sketch for
tool Extend Project problems
entities
Ken Youssefi
Introduction to Engineering, E10. 2
Spline
Ken Youssefi
Introduction to Engineering, E10. 3
Spline on a curved surface
Select the
surface to draw
Direction
Introduction to Engineering, E10. 5
Ken Youssefi
Select body to keep
Ken Youssefi
Introduction to Engineering, E10. 6
SolidWorks Sketch Commands
Projected entities
Ken Youssefi
Introduction to Engineering, E10. 8
SolidWorks Sketch Commands
Plane 1
Plane 2
3D curve
Ken Youssefi
Introduction to Engineering, E10. 9
Constraints
Select line
Select Vertical
Ken Youssefi
Introduction to Engineering, E10. 10
Constraints
Select two entities (lines)
Tangent constraint
Select Collinear
Ken Youssefi
Introduction to Engineering, E10. 11
Constraints
Two curved entities
Ken Youssefi
Introduction to Engineering, E10. 13