Professional Documents
Culture Documents
Introduction
CNC
BARREL
TOOL ROOM REVOLVER
CNC
CNC stands for COMPUTER NUMERICAL
CONTROL It is very advance for NC machines. In the CNC machines ,there are many type of operations automatically exists. In the CNC machines ,we are using the G-codes and M-codes for programming purpose, where Gcodes are universal codes and M-codes are vary from different -2 machines
BARREL
In the barrel section we are made the barrel of all types of
guns which are made in SAF factory. LMG5.56mm RIFLE 5.56mm CARBINE REVOLVER
LMG5.56 MM
LMG stands for LIGHT MACHINE GUN mainly uses in
the border.
We can convert the spiral form in the barrel of LMG and
RIFLE.
Robotics machine is very costly machine and it is used in
cold swaging,
Tool Room
The designation of tool is define by a tool name for
example, If tool name is SPTM then the first letter is decided the size of the tool means we are uses the square tool. In the tool room we are uses the tool for HSS and CARBIDE tools but mainly we are uses the HSS tools ,we are uses CARBIDE tools for finishing operations. The hardness of Carbide Tools is 4 times the HSS tools.
Reamer ,Milling ,Cutter , End mill ,Turning and these tool are work on different way
We are using jigs and fixtures for holding purpose, all six
Revolver Section
In the revolver section we are making the revolver
component like barrel trigger hammer , cylinder , body , spring etc. and then finally assembled. There 2 types of barrel , short barrel, long barrel. The range of short barrel is 10 meter The range of long barrel is 25 meter
MAG Gun
The mag gun are also known as machine gun This type of gun is mainly uses in the border line The weight of the machine gun is 15.5 kg. Dont us without stand