Professional Documents
Culture Documents
ACB Masterpact
ACB Masterpact
Masterpact circuit breakers are used to protect and control low-voltage distribution systems. They may be installed in main LV switchboards (incoming units, main and secondary outgoers). Masterpact is a complete range offering a large selection of performance levels: c ratings from 800 to 6300 A AC, from 1000 to 8000 A DC; c breaking capacity from 40 to 150 kA rms; c operational voltages 690 V AC, 1000 V DC.
Many versions c 3 or 4 poles; c fixed or drawout versions; c current-limiting version up to 2500 A; c wide range of control units offering multiple functions. Circuit breakers designed for all applications c 1000 V AC version; c DC version; c anti-corrosion version; c source-changeover version; c merchant-marine and military versions. Masterpact circuit breakers comply with all major international standards and meet T2 tropicalisation criteria.
035928PC
front face
1 opening push-button (O) 2 closing push-button (I) 3 keylock for "connected", "disconnected" or "test" position 4 door interlock 5 stored-energy-mechanism charging handle 6 operations counter 7 "open" position keylock 8 racking handle storage 9 functional position indicator: "connected", "test" and "disconnected" 10 controls on fixed chassis (accessible with cubicle door closed) 11 padlocking facilities for "connected", "disconnected" or "test" position 12 stored-energy-mechanism status indicator
E28760
14 7 2 5 1 6 12 13
c "charged" c "discharged"
charged discharged
O I
OFF ON
10
11
c "ON" (I).
14 fault-trip indicator/breaker reset button LV circuit-breaker: blue figures Enclosure: red figures
E28791
M63
M50
M40
IG
LI LIG G off
push to reset
reset V
I LG L
MERLIN GERIN
masterpact
I
I1
90%
I2
I3
O
push OFF
I
push ON
STR 58 UE
50%
20%
Io 90 %Ir 105
0.5 0.63
discharged
Ir
0.8 .88 .85 1 .8 .9 .92 .95 60 .98 30 1
tr
120
240
O OFF
00000
480 15 at 1,5Ir .3 .2
xIn Im
3 2 1.5 4
xIo
5 6 .3 8 10 .2
Reduced dimensions c AC circuit breakers: v a single frame size from 800 to 3200 A, v common height and depth from 800 to 6300 A; c DC circuit breakers: v common height and length from 1000 to 8000 A for operational voltages of up to 500 V DC, v common height and length from 1000 to 4000 A for operational voltages greater than 500 V DC.
tm.4
xIo
12 17 22
.1 0 .1 2 on I t off
I t
Ir fault
8 6 4 2
Ir : Im : th :
Im fault tm I
off
xIn
tr
Ih
400
500
Ih fault th
600 800
th .4
.3
T
.4 .3
A
.93 .95
.2 .1 .1 2 on I t off
i +S test T+ F
Ic1 .9
.86 .85 .8
Ic2 .8
.7 .6 .5 xIr .98
R
.85 .9 .95 1
1 xIr
test
Merlin Gerin
015159
3 4
6 7 8
10 9
drawout version
1 2 3 4 5 6 7 8 9 10 arc chute cover auxiliary terminal shield auxiliaries connection block fixed chassis safety shutters arc chute remote control voltage release motor for electrical charging of stored energy mechanism control unit (AC system) front cover
Merlin Gerin
Masterpact: presentation
E29490
20%
Io 90 %Ir 105
0.5 1 0.63 0.8
Ir
.88 .85
.9
tr
240
480 15 at 1.5Ir
.8
xIn Im
3 2 1.5 4
xIo
5 6 .3 8 10 .2
tm
.4
.3 .2 .1 0 off
tr
norm min. I Ir :
Ir fault
xIr
14 19 22 Max.
.1 on I2t
12 8 4 2
Im : th :
Im fault tm I
tr Ih fault th
xIn
.4 .3 .2 .1 off
i
overcurrent
Ic1
.86 .85
Ic2
.93 .95 .98 .7 .6
R
.8 .85 .9 .95 .5 1
.9
test
ground
.8
xIr
xIr
test
dclencheurs voltmtriques accessibles l'avant voltage releases accessible from the front
other possibilities
035929
c Fixed circuit breaker The fixed circuit breaker is derived from the moving part of the drawout circuit breaker by adding a fixing bracket on each side. c Switch version The switch (unprotected) version is derived directly from the standard circuit breaker, but does not implement a control unit (or the magnetic trip units used with the DC circuit breakers). Available models are: v standard: type HI and NI; v high performance: type HF, equipped with a protection system that instantaneously opens the circuit breaker in the event of closure under fault conditions. c Earthing switch A special short-circuit and earthing switch is available on request for the M08 to M32H drawout types, 3 or 4 poles. Please consult us.
053060
053061
053058
Merlin Gerin
86094
DC circuit breakers
Masterpact DC circuit breakers are available in fixed and drawout versions. They benefit from the AC range technology and advantages. c 5 available ratings from 1000 to 8000 A; c 2 breaking capacities, 100 kA at 500 V, 50 kA at 750 and 1000 V; c a circuit-breaker version offering instantaneous short-circuit protection with an adjustable, magnetic trip unit (DINA); c a switch (unprotected) version. note: up to 125 V DC, the devices in the AC range (M08 to M63) may be used only in the switch version, in which case a three-pole, type HI device should be used, with: c 1 pole for the positive polarity; c 1 pole for the negative polarity; c 1 pole not used.
Auxiliaries All the auxiliaries designed for the Masterpact AC circuit breakers may be used on the DC versions, with the exception of the position switches, indicating the connected (CE), disconnected (CD) and test (CT) positions. Auxiliary connections are made via one or two manually disconnectable plugs that remain accessible from the front. Accessories Standard Masterpact DC range equipment includes an arc-chute cover (CC) and, on drawout versions, safety shutters (VO). Interphase barriers (EIP) are not available for the DC range.
86096
device identification M 20 H1
breaking capacity; c N1: standard; c H1: H2: high performance; c L1: current limiting; c DC: direct current. rating c rated current / 100. family c Masterpact: LV power air circuit breaker.
Merlin Gerin
Masterpact: presentation
036634
Masterpact circuit breakers are the product of Merlin Gerins vast experience in the field of power circuit breakers. They incorporate all the qualities of traditional air circuit breakers while drawing on certain of the advantages specific to moulded-case circuit breakers. In particular, they require no preventive maintenance.
continuity of service
Masterpact circuit breakers are designed with continuity of service in mind. The result is: c total time discrimination on the N1 and H1 circuit breakers and maximum discrimination on H2 circuit breakers; c factory pre-setting of Masterpact circuit breakers which never require any periodic maintenance; c high electrical endurance: 10 000 cycles at 1600 A and 30 cycles at 50 kA, without maintenance; c preventive indications: load-shedding indication switch, long-time threshold overrun alarm, etc.; c easy access to the main contacts fitted with mechanical wear indicators. An optional function on the STR68 control unit is the remote indication of contact wear, thus making possible continuous monitoring of circuit breakers during their service life.
ease of installation
2500 A Masterpact circuit breaker
Masterpact is a complete and rationally designed range. c 10 ratings; c 4 breaking-capacity levels; c 6 control units; c a complete range of auxiliaries and accessories; c numerous versions (three and four-pole devices, fixed and drawout versions, etc.). Masterpact circuit breakers are easy to incorporate in switchboards. c a single frame size from 800 to 3200 A, thus making for standardised columns; c an upper safety clearance equal to zero due to the arc-chute cover, on both the fixed and drawout versions; c built-in measurement functions in the control units; c auxiliaries are the same for the entire range and may be easily implemented (only a screwdriver is required). Masterpact circuit breakers are easy to connect to the main distribution system. c all types of connections are available (horizontal and vertical terminals, front and mixed connections); c connections are possible with bars of any thickness; c connection to the input power source is possible on the upper or lower terminals of the circuit breakers. Due to their small size, Masterpact circuit breakers can replace most existing circuit breakers.
025179
operating safety
The insulating casing of Masterpact circuit breakers provides for: c user safety: v double insulation on the front face (class II), v auxiliary circuits in a compartment insulated from the power circuits; c switchboard safety when the circuit breaker is in the open position: v each pole is effectively isolated in its own housing, v limitation of external disturbances. Positive contact indication The position indicator cannot indicate open unless the poles are effectively separated by the required distance. The circuit breakers automatically open during racking in and out.
reliability
c Masterpact circuit breakers comprise ten times fewer parts than traditional devices. They are easier to produce and more reliable. c the Masterpact circuit-breaker factory is certified ISO 9002; c the design of Masterpact circuit breakers is modular with delayed differentiation (highest possible number of common parts on all models). The result is shorter delivery times and enhanced reliability.
Merlin Gerin
general characteristics
MERLIN GERIN
masterpact M32 H2
Ui 1000V 50/60Hz Ue 380/440V 480/690V Icu 100kA Ics 100kA Icw 75kA 1s IEC 947-2
Standardised characteristics indicated on the rating plate: Ui: rated insulation voltage Ue: rated operational voltage Icu: ultimate breaking capacity, for various values of the rated operational voltage Ue Ics: service breaking capacity Icw: short-time withstand current : suitable for isolation
Masterpact circuit breakers comply with all the major international standards: c International standard IEC 947-2; c North American standards (please consult us): UL 489, ANSI C37-50, CSA C22-2, NEMA AB1 et SG3; c Japanese standards: JIS 160 and C 8372. They also comply with the following national standards: c France NF C 63-120; c Germany VDE 0660; c United Kingdom BS 4752; c Australia AS ; c Italy CEI. Masterpact circuit breakers comply with the specifications of the marine classification companies (Veritas, Lloyd's Register of Shipping, Det Norske Veritas, etc.).
IEC 947-2
This standard replaces IEC 157-1, applicable since 1973. The circuit breaker selection criteria are unchanged, but the new standard provides the user with a better guarantee concerning quality and performance. Circuit breakers are subjected to tests that are more representative of real operating conditions. IEC 947-2 also clarifies the notion of breaking capacity. c Icu : the ultimate breaking capacity, which must be greater than or equal to the 3-phase short-circuit current at the point of installation of the circuit breaker, a value unlikely to be reached under real conditions; c Ics : the service breaking capacity, generally expressed as a percentage of the ultimate breaking capacity (25, 50, 75 or 100 % of Icu). It corresponds to a shortcircuit current that is more likely to be reached under real conditions. The circuit breaker must continue to operate normally after having interrupted a current equal to Ics several times; c Icw : short-time withstand current for circuit breakers belonging to category B (category B refers to circuit breakers with time discrimination and category A to those without time discrimination). Furthermore, IEC 947-2 takes into account recent technological advances: c suitability for isolation recognised for circuit breakers having passed special electrical and mechanical tests; c industrial earth-fault circuit breakers covered by an appendix; c definition of tests designed to ensure coordination between two circuit breakers.
85kA 85kA
tropicalisation
As standard, Masterpact circuit breakers comply with NF C 63-100 standard level 2 conditions (95 % relative humidity at 45 C or 80 % at 55 C, hot and humid climate conditions). They also comply with the following standards: c IEC 68-2-30 damp heat; c IEC 68-2-2 dry heat; c IEC 68-2-11 salt spray; c IEC 68-2-1 low temperatures during storage. Corrosive atmospheres: Special grease or other surface coatings available (please consult us).
pollution degree
Masterpact circuit breakers are certified for operation in pollution degree IV environments as defined by IEC standard 947 (industrial environments).
Merlin Gerin
035932RC
maximum dependability
All Masterpact circuit breakers are also disconnectors (suitable for isolation) as specified by IEC 947-2. They bear the corresponding symbol on the front cover:
E18569
This characteristic considerably increases the dependability of the circuit breaker. The conditions specified by IEC 947-2 for this function are: c positive contact indication; c impulse withstand: 8 kV at sea level; c very low leakage current, checked on new circuit breakers and on circuit breakers subjected to tests representative of the end of service life. Moreover Masterpact circuit breakers have a double-insulation front face (i.e. a class II device) allowing control from the outside.
installation
Masterpact circuit breakers may be installed on horizontal metal surfaces or on rails. They are secured by four points accessible at the bottom of the chassis (drawout versions) or on either side of the circuit breaker (fixed versions). A single door cut-out is required for the entire range and provides access to Masterpact controls (see the description on page 2). .
degree of protection
(as defined by IEC 529)
E28757
IP 30-5
circuit breaker installed in a cabinet with access to controls through a door cut-out
E28763
E28758
IP 40-5
circuit breaker installed in a cabinet behind a door with a cut-out fitted with a sealed, transparent cover
IP 54-9
Merlin Gerin
035928
service breaking capacity short-time withstand current (kA rms) making capacity (kA peak)
Ics Icw
(% Icu) AC 50/60 Hz
Icm
AC 50/60 Hz
electrodynamic withstand (kA peak) utilisation category suitability for isolation break time closing time endurance (C-O cycles) x 1000
mechanical electrical
electrical characteristics as per standard Nema AB1 protection (see following pages)
sensor ratings (A) (see page 12) control unit protection type instantaneous distribution selective universal STR 18 M STR 28 D STR 38 S STR 58 U STR 68 U
control auxiliaries
auxiliary releases (MN, MNR, MX, XF) motor mechanism (MCH) operation counter (CDM)
(1) Defined for a power factor of 0.25 if 20 < kA rms 50 or 0.20 of kA rms > 50. (2) Closing at 6 x Ie and opening at 0.17 x Un. (3) For control unit STR 68 U, the minimum rating In is 400 A.
M08
3, 4 800 800 1000 8000 690
M10
3, 4 1000 1000 1000 8000 690
M12
3, 4 1250 1250 1000 8000 690
M16
3, 4 1600 1600 1000 8000 690
N1
H1
H2
L1
N1
H1
H2
L1
N1
40 40 40 100 % 40 30 22 84 84 84 84 B c
H1
65 65 65 100 % 65 50 32 143 143 143 143 B
H2
100 100 85 100 % 65 50 32 220 220 187 143 B
L1
130 110 65 100 % 12 12 12 286 242 143 24 B
N1
40 40 40 100 % 40 40 22 84 84 84 84 B c
H1
65 65 65 100 % 65 50 32 143 143 143 143 B
H2
100 100 85 100 % 65 50 32 220 220 187 143 B
L1
130 110 65 100 % 17 17 12 286 242 143 34 B
40 65 100 130 40 65 100 130 40 65 100 110 40 65 100 110 40 65 85 65 40 65 85 65 100 % 100 % 100 % 100 % 100 % 100 % 100 % 100 % 40 65 65 12 40 65 65 12 30 50 50 12 30 50 50 12 22 32 32 12 22 32 32 12 84 143 220 286 84 143 220 286 84 143 220 242 84 143 220 242 84 143 187 143 84 143 187 143 84 143 143 24 84 143 143 24 B B B B B B B B c c 25 to 30 ms without intentional time delay and 9 ms for type L1 70 ms 20 20 20 20 20 20 20 20 10 10 10 10 10 10 10 10 10 10 10 3 10 10 10 2.7 10 10 10 3 10 10 10 2.7 10 10 10 10 10 10 40 40 65 65 100 65 40 40 65 65 100 65 -
20 10 10 10 10 40 40
20 10 10 10 10 65 65
20 10 10 10 10 100 65
15 10 2.5 2.5 -
20 10 10 10 10 40 40
20 10 10 10 10 65 65
20 10 10 10 10 100 65
15 10 2.2 2.2 -
c c c c c
c c c
c c c c c
c c c
c c c c c
c c c
c c c c c
c c c
c c c c c c c c c c c c c c c
c c c c c c c c c c c c c c c
c c c c c c c c c c c c c c c
7
036635
ultimate breaking capacity (1) (kA rms) service breaking capacity short-time withstand current (kA rms) making capacity (kA peak)
Ics Icw
(% Icu) AC 50/60 Hz
Icm
AC 50/60 Hz
electrodynamic withstand (kA peak) utilisation category suitability for isolation break time closing time endurance (C-O cycles) x 1000
mechanical electrical
electrical characteristics as per standard Nema AB1 protection (see following pages)
sensor ratings (A) (see page 12) control unit protection type instantaneous distribution selective universal STR 18 M STR 28 D STR 38 S STR 58 U STR 68 U
control auxiliaries
auxiliary releases (MN, MNR, MX, XF) motor mechanism (MCH) operation counter (CDM)
(1) Defined for a power factor of 0.25 if 20 < kA rms 50 or 0.20 of kA rms > 50. (2) Closing at 6 x Ie and opening at 0.17 x Un. (3) For control unit STR 68 U, the minimum rating In is 400 A. (4) 83% if Ue i 440 V. (5) Consult us for full rated neutral.
M20
3, 4 2000 2000 1000 8000 690
M25
3, 4 2500 2500 1000 8000 690
M32
3, 4 3200 3200 1000 8000 690
M40
3, 4 4000 4000 1000 8000 690
M50
3, 4 5000 2500 (5) 1000 8000 690
M63
3, 4 6300 3200 1000 8000 690
N1
H1
H2
L1
N1
H1
H2
L1
H1
H2
100 100 85 100 % 75 75 75 220 220 187 165 B
H1
75 75 75 100 % 75 75 75 165 165 165 165 B c 80 ms 10 5 3 2.5 2.5 75 75
H2
100 100 85 100 % 75 75 75 220 220 187 165 B
H1
100 100 85 100 % 100 100 100 220 220 187 220 B c
H2
150 150 85 100 % (4) 100 100 100 330 330 187 220 B
H1
100 100 85 100 % 100 100 100 220 220 187 220 B c
H2
150 150 85 100 % (4) 100 100 100 330 330 187 220 B
55 75 100 130 55 75 100 130 75 55 75 100 110 55 75 100 110 75 55 75 85 65 55 75 85 65 75 100 % 100 % 100 % 100 % 100 % 100 % 100 % 100 % 100 % 55 75 75 17 55 75 75 17 75 55 75 75 17 55 75 75 17 75 50 57 57 17 50 75 75 17 75 121 165 220 286 121 165 220 286 165 121 165 220 242 121 165 220 242 165 121 165 187 143 121 165 187 143 165 121 165 165 34 121 165 165 34 165 B B B B B B B B B c c c 25 to 30 ms without intentional time delay and 9 ms for type L1 70 ms 15 15 15 15 15 15 15 15 15 10 10 10 10 10 10 10 10 10 9 9 9 2 8 8 8 1.8 4 7 7 7 2 6 6 6 1.8 2.6 7 7 7 6 6 6 2.6 55 55 75 75 100 75 55 55 75 75 100 75 75 75
c c c
c c c
600 to 3200 c c c c c c c c c c
2000 to 5000 c c c c c c c c c c
2000 to 6300 c c c c c c c c c c
c c c c c c c c c c c c c c c
c c c c c c c c c c c c c c c
c c (3P only) c c c c c c c c c c c c
c c c c c c c c c c c c
9
AC 50/60 Hz AC 50/60 Hz 220/415 V 440 V 500/690 V 1000 V 0.5 s 1s 3s 220/415 V 440 V 500/690 V 1000 V
service breaking capacity short-time withstand current (kA rms) making capacity (kA peak)
Ics Icw
(% Icu) AC 50/60 Hz
Icm
AC 50/60 Hz
electrodynamic withstand (kA peak) utilisation category suitability for isolation break time closing time endurance (C-O cycles) x 1000
mechanical electrical
control auxiliaries
auxiliary releases (MN, MNR, MX, XF) motor mechanism (MCH) operation counter (CDM)
(1) Defined for a power factor of 0.25 if 20 < kA rms 50 or 0.20 of kA rms > 50. (2) Closing at 6 x Ie and opening at 0.17 x Un. (3) For control unit STR 68 U, the minimum rating In is 400 A.
10
Merlin Gerin
M08
3, 4 800 800 1000 8000 1000
M10
3, 4 1000 1000 1000 8000 1000
M12
3, 4 1250 1250 1000 8000 1000
M16
3, 4 1600 1600 1000 8000 1000
M20
3, 4 2000 2000 1000 8000 1000
M25
3, 4 2500 2500 1000 8000 1000
M32
3, 4 3200 3200 1000 8000 1000
H1
H1
H1
H1
H1
75 75 75 45 100 % 45 45 45 165 165 165 95 165 B c
H1
75 75 75 45 100 % 45 45 45 165 165 165 95 165 B c
H1
75 75 75 45 100 % 45 45 45 165 165 165 95 165 B c
65 65 65 65 65 65 65 65 65 65 65 65 45 45 45 45 100 % 100 % 100 % 100 % 45 45 45 45 45 45 45 45 32 32 32 32 143 143 143 143 143 143 143 143 143 143 143 143 95 95 95 95 143 143 143 143 B B B B c c c c 25 to 30 ms without intentional time delay and 9 ms for type L1 70 ms 20 20 20 20 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 200 to 800 (3) c c c c c 200 to 1000 (3) c c c c c 200 to 1250 (3) c c c c c 200 to 1600 (3) c c c c c
c c c c c c c c c c c c c
c c c c c c c c c c c c c
c c c c c c c c c c c c c
c c c c c c c c c c c c c
c c c c c c c c c c c c c
c c c c c c c c c c c c c
c c c c c c c c c c c c c
Merlin Gerin
11
switch-disconnectors
052384
Masterpact switch-disconnectors
number of poles
In Ui Uimp Ue Icw
40 C
type of switch-disconnector
making capacity (kA peak) electrodynamic withstand (kA peak) suitability for isolation closing time endurance (C-O cycles) x 1000
Icm
AC 50/60 Hz
mechanical electrical
protection
STR 08 dummy unit (no protection) STR 18I (protection against short-circuits when closing)
control auxiliaries
auxiliary releases (MN, MNR, MX, XF) motor mechanism (MCH) operation counter (CDM)
12
Merlin Gerin
M08
3, 4 800 800 1000 8000 690
M10
3, 4 1000 1000 1000 8000 690
M12
3, 4 1250 1250 1000 8000 690
M16
3, 4 1600 1600 1000 8000 690
NI
40 30 22 84 84 84 c 70 ms 20 10 10 10 10 c
HI
65 50 32 105 105 143
HF
65 50 32 143 143 143
NI
40 30 22 84 84 84 c 20 10 10 10 10 c
HI
65 50 32 105 105 143
HF
65 50 32 143 143 143
NI
40 30 22 84 84 84 c 20 10 10 10 10 c
HI
65 50 32 105 105 143
HF
65 50 32 143 143 143
NI
40 30 22 84 84 84 c 20 10 10 10 10 c
HI
65 50 32 105 105 143
HF
65 50 32 143 143 143
20 10 10 10 10 c
20 10 10 10 10
20 10 10 10 10 c
20 10 10 10 10
20 10 10 10 10 c
20 10 10 10 10
20 10 10 10 10 c
20 10 10 10 10
c c c c c c c c c c c c c c
c c c c c c c c c c c c c c
c c c c c c c c c c c c c c
Merlin Gerin
13
switch-disconnectors (cont.)
052388
Masterpact switch-disconnectors
number of poles
In Ui Uimp Ue Icw
40 C
type of switch-disconnector
short-time withstand current (kA rms) making capacity (kA peak) electrodynamic withstand (kA peak) suitability for isolation closing time endurance (C-O cycles) x 1000
Icm
AC 50/60 Hz
mechanical electrical
protection
STR 08 dummy unit (no protection) STR 18 I (protection against short-circuits when closing)
control auxiliaries
auxiliary releases (MN, MNR, MX, XF) motor mechanism (MCH) operation counter (CDM)
12
Merlin Gerin
M20
3, 4 2000 2000 1000 8000 690
M25
3, 4 2500 2500 1000 8000 690
M32
3, 4 3200 3200 1000 8000 690
M40
3, 4 4000 4000 1000 8000 690
M50
3, 4 5000 2500 1000 8000 690
M63
3, 4 6300 3200 1000 8000 690
NI
55 55 50 84 84 121 c 70 ms 15 10 9 7 7 c
HI
75 75 57 105 105 165
HF
75 75 57 165 165 165
NI
55 55 50 84 84 121 c 15 10 8 6 6 c
HI
75 75 75 105 105 165
HF
75 75 75 165 165 165
HI
75 75 75 105 105 165 c 15 10 4 2.6 2.6 c
HF
75 75 75 165 165 165
HI
75 75 75 105 105 165 c 80 ms 10 5 3 2.5 2.5 c
HF
75 75 75 165 165 165
HI
100 100 100 187 187 220 c 10 5 3 2.5 2.5 c
HF
100 100 100 220 220 220
HI
100 100 100 187 187 220 c 10 5 2 1.5 1.5 c
HF
100 100 100 220 220 220
15 10 9 7 7 c
15 10 9 7 7
15 10 8 6 6 c
15 10 8 6 6
15 10 4 2.6 2.6
10 5 3 2.5 2.5
10 5 3 2.5 2.5
10 5 2 1.5 1.5
c c c c c c c c c c c c c c
c c c c c c c c c c c c c c
c c (3P only) c c c c c c c c c c c
c c c c c c c c c c c
Merlin Gerin
13
sensor selection
In (A) Ir threshold settings (A) In (A) Ir threshold settings (A) 200 80 to 200 1250 500 to 1250 250 100 to 250 1600 640 to 1600 320 125 to 320 2000 800 to 2000 400 160 to 400 2500 1000 to 2500 500 200 to 500 3000 1200 to 3000 600 240 to 600 3200 1280 to 3200 630 250 to 630 4000 1600 to 4000 800 320 to 800 5000 2000 to 5000 1000 400 to 1000 6000 2400 to 6000 1200 480 to 1200 6300 2500 to 6300
The table above indicates: c all the available sensor ratings In; c the limits of the long time Ir settings.
12
Merlin Gerin
M08
N1/H1/H2/L1 NI/HI/HF
435 x 439 x 367 550 x 439 x 367 422 x 356 x 290 537 x 356 x 290 65 80 43 54
M10
N1/H1/H2/L1 NI/HI/HF
435 x 439 x 367 550 x 439 x 367 422 x 356 x 290 537 x 356 x 290 65 80 43 54
M12
N1/H1/H2/L1 NI/HI/HF
435 x 439 x 367 550 x 439 x 367 422 x 356 x 290 537 x 356 x 290 65 80 43 54
M16
N1/H1/H2 L1 NI/HI/HF
435 x 439 x 367 550 x 439 x 367 422 x 356 x 290 537 x 356 x 290 69 82 85 102 46 55 58 69
M20
N1/H1/H2 L1 NI/HI/HF
435 x 439 x 367 550 x 439 x 367 422 x 356 x 290 537 x 356 x 290 82 130 102 150 55 80 69 90
M25
N1/H1/H2 L1 NI/HI/HF
435 x 439 x 367 550 x 439 x 367 422 x 356 x 290 537 x 356 x 290 82 130 102 150 55 80 69 90
M32
H1/H2 HI/HF
435 x 439 x 367 550 x 439 x 367 422 x 356 x 290 537 x 356 x 290 130 150 80 90
M40
H1/H2 HI/HF
550 x 439 x 367 815 x 484 x 367 537 x 356 x 290 801 x 356 x 290 150 200 90 110
M50
H1/H2 HI/HF
815 x 484 x 367 1045 x 484 x 367 802 x 356 x 290 215 230 110
M63
H1/H2 HI/HF
1045 x 484 x 367 1045 x 484 x 367
245 265
M08
H1
435 x 439 x 367 550 x 439 x 367 65 80
M10
H1
435 x 439 x 367 550 x 439 x 367 65 80
M12
H1
435 x 439 x 367 550 x 439 x 367 65 80
M16
H1
435 x 439 x 367 550 x 439 x 367 69 85
M20
H1
435 x 439 x 367 550 x 439 x 367 82 102
M25
H1
435 x 439 x 367 550 x 439 x 367 82 102
M32
H1
435 x 439 x 367 550 x 439 x 367 130 150
Merlin Gerin
13
Masterpact M08 to M63 circuit breakers are equipped with microprocessor-based electronic control units. All the protection functions are powered by the AC system and no auxiliary power supply is required. The same is true for most of the complementary functions. Each control unit of the Masterpact range corresponds to a certain type of application (instantaneous, distribution, selective, universal). All the STR control units measure the true rms value of the current and are therefore not affected by harmonics that may be present on the system.
E31218
80
160
400
1250
1600
2000
2500
3200
4000
5000
6300
STR 18 M
E30703 E31219
protection
t
Key:
push to reset
reset button: pops out when the circuit breaker has tripped on a fault and must be pressed (reset) before the circuit breaker can be closed again. maximum protection rating. instantaneous pick-up. test connector. holes for sealable cover plate screws.
2 3 4 5
STR 18 M
2 5
0
I
other functions
c fault indication.
I 12 14
8 4 2 xIn 19 22 max
+ test
4 5
14
Merlin Gerin
STR 28 D
E30704 E31220
protection
t
Key:
push to reset
reset button: pops out when the circuit breaker has tripped on a fault and must be pressed (reset) before the circuit breaker can be closed again. ammeter digital display. bar graph indicating load level (% Ir). maximum protection rating.
2
I1 90% I2 I3
I
2 3 4
3
STR 28 D
50%
4 11
Io 0.63 Ir 0.8 1 xIn Im 3 .88 .85 .8 xIo 1 .9 .92 .95 .98
7
0
Ir I
8 9
20%
5 8
90 %Ir 105
0.5
6 7
other functions
c c c c fault indication; indication of LT overrun; ammeter; self-monitoring (internal overheating).
4 5 6
2 8 1.5 xIr 10 t Ir :
Ir
Im :
Im
i
+
test
10 11
STR 38 S
E31221 E33950
protection
t
I2t ON
Key: 1
push to reset
7
I2t OFF
reset button: pops out when the circuit breaker has tripped on a fault and must be pressed (reset) before the circuit breaker can be closed again. ammeter digital display. bar graph indicating load level (% Ir). maximum protection rating. overcurrent indicator LED.
2
I1 90% I2 I3
I
3 4
3
STR 38 S
50%
12 13
4
8 9 11
6-7 long-time current setting as a function of: Io x Ir x In. 8 short-time pick-up. 9 short-time delay. 10 noted settings. 11 instantaneous pick-up. 12 earth fault pick-up. 13 earth fault delay. 14 LEDs indicating tripping on long-time, short-time or earth fault. 15 test connector. 16 holes for sealable cover plate screws. 17 battery supplying backup power for fault indication. 18 fault indication reset and/or battery test. 19 re-indication of last fault.
20% Io 0.63 %Ir 105 0.5 xIn Im 3 1 Ir 0.8 .88 .85 .8 1 xIo tm 6 8 10 xIr t
Ir fault
Ir : Im :
16
.9 .92 .95 .98
5 6 8
90
Ir
Im
other functions
.4 .3 .2
4 5
.3 .2
2 1.5 I
.1 0 .1 on I2t off
9 11 12 13 15
10
Ih fault
tr
14 16
F
th
max. off xIn th : Ih T th 500 600 .4 .4 Im fault 400 tm 800 .3 .3 I 320 1000 .2 .2 .1 250 1200 .1 i A on I2t off overcurrent
+
c c c c c
fault indication; indication of LT overrun; ammeter; self-monitoring (internal overheating); indication of type of fault (F).
17 18
19
Merlin Gerin
15
STR 58 U
E31222 E30705
protection
V
1
push to reset
t
I2t ON
Key: 1
8
I2t OFF
9
3
I1 90% I2 I3
I
4
STR 58 U
50%
14
5 21
20%
10 11 13
15
6 7 12 10 16
19 21 24 23
tr 120 240 .9 .92 0.8 90 .88 .95 60 %Ir 480 .85 .98 30 105 1 0.5 1 15 .8 xIn at 1.5Ir xIo Max. Im tm 4 5 .4 .3 tr 3 .3 6 .2 2 .2 norm 8 .1 0 1.5 10 .1 2t off on I xIr I 12 14 t Ir : 8 19 Ir fault 4 22 Im : 2 off tr xIn th : Ih 1200A Max th T Ih 500 600 .4 .4 fault Im fault 400 800 .3 .3 tm th 320 1000 .2 .2 I .1 250 1200 .1 i A on I2t off overcurrent Ic1 Ic2 R + .8 .85 .9 .93 test .86 .9 .95 .7 .85 + .95 .98 .6 ground 1 .5 8 1 xIr xIr F test
Io 0.63
Ir
8 9 11 13 14 15 17 18 20 22
0
Ir Im I
other functions
c c c c c c fault indication; indication of LT overrun; ammeter; self-monitoring (internal overheating); fault type indication (F); segregated alarm switch for selected fault type (V); c zone selective interlocking (Z); c load monitoring (R); c communication (COM).
reset button: pops out when the circuit breaker has tripped on a fault and must be pressed (reset) before the circuit breaker can be closed again. 2 selection of fault type for segregated alarm: Ir and/or Im and/or Ih L: long-time fault (Ir) I: short-time fault (Im/l) T: earth fault (Ih) 3 ammeter digital display. 4 bar graph indicating load level (% Ir). 5 maximum protection rating. 6 overcurrent indicator LED. 7-8 long-time current setting as a function of: Io x Ir x In. 9 long-time trip delay 10 short-time pick-up. 11 short-time delay. 12 adjustment of thermal memory after tripping. 13 instantaneous pick-up. 14 earth fault pick-up. 15 earth fault delay. 16 noted settings. 17-18 load monitoring settings. 19 test connector. 20 battery supplying backup power for fault indication. 21 holes for sealable cover plate screws. 22 fault indication reset and/or battery test. 23 re-indication of last fault. 24 LEDs indicating tripping on long-time, short-time or earth fault.
STR 68 U
E33949 E31223
protection
reset
1 2
t
LT setting (Ir)
I2t ON
Key: 1 reset button: pops out when the circuit breaker has tripped on a fault and must be pressed (reset) before the circuit breaker can be closed again. 2 selection of displayed value (voltage, power, energy, power factor, frequency). 3 display of current or interrupted current (when flashing). 4 local fault indication and indication reset. 5 selection and indication of protection parameter to be set. 6 selection and indication of load monitoring parameters. 7 adjustment and saving of parameter settings. 8 holes for sealable cover plate screws. 9 test connector. 10 test. 11 maintenance indicator.
V N 1 2 3 Hz Cos kW MWh
I2t OFF
STR 68 U
Ir
Im
other functions
fault s
tr
tm th Ih Ir Im I A
c c c c c c c
5 6
11 10
trip
1 load monitoring
%
maintenance
fault indications and memorisation; maintenance indicator; ammeter; integrated test; power measurement; load monitoring (R); self-monitoring (internal overheating, malfunction of the microprocessor); c zone selective interlocking for earth faults.
+
24 V DC
7 9 8
adjustments
16
Merlin Gerin
E31225
I2t ON
I2t OFF
Ih Th
This earth fault protection is designed to protect the installation against the risks of fire due to high earth faults (not to be confused with schemes designed for the protection of persons against electrical shock). Two types of earth protection are available for Masterpact: c residual current type (T): the control unit calculates the vector sum of the phase and neutral (if distributed) currents; c source ground return type (W): the control unit acts directly on the signal received from an external current transformer installed on the source earthing circuit.
0
earth fault curves for the STR 58
E26037
Ic2 Ic1
0
load monitoring curves for the STR 58
Transmission of the control unit settings, circuit breaker position and current, voltage and power measurements.
Other information that can be transmitted includes the value of the interrupted current, the state of the thermal memory and the maintenance indications c indication of type of fault (F); c segregated alarm switch for selected fault type (V), wired in parallel with the opening button (MX), it disables circuit breaker closing for the selected type of fault.
c ammeter (I): a digital display continuously indicates the current of the phase with the greatest load (Imax). By pressing a scroll button, it is also possible to display successively the readings of I1, I2, I3, Ineutral and Ih. In addition, three bargraphs provide an immediate visual indication of the load on each of the three phases.
Merlin Gerin
17
control unit
type of circuit breaker
basic protection
long time protection LT current setting (Ir) as a function of Io and Ir settings tripping between 1.05 and 1.20 x Ir time delay (tr) accuracy: + 0 - 20 % Io = In x ... Ir = Io x ... tr at 1.5 Ir (s) tr at 6 Ir (s) tr at 7.2 Ir (s) Im = Ir x ... tm setting with I2t OFF tm setting with I2t ON max. overcurrent time before tripping (ms) max. break time (ms)
STR 58 U
instantaneous protection I pick-up setting setting range accuracy OFF switch on front face
basic functions
fault indication for tripping on a fault for LT setting overrun indicator button on front face fault trip alarm contact (SDE) LED (lights up at 0.9 Ir and flashes at 1.05 Ir) LT overrun alarm contact (optional) self-powered internal overheating
self-monitoring
optional functions
ammeter (I) display between 0.2 and 1.20 In current readings with an accuracy of 1.5 % (1) (3) bargraph indication of current levels with a resolution of 10 % self-powered earth fault protection: residual current (T) or source ground return (W) type on request pick-up adjustable by Ih setting Ih = In x ... time delay (th) th setting with I2t ON and I2t OFF max. overcurrent time before tripping (ms) max. break time (ms) indication of type of fault (F) (LT - CT/Inst. - Earth) by LEDs on front face power supply with battery module with external power supply by AD module segregated alarm switch for selected fault type (V) (LT - CT/Inst. - Earth) output via relay contact power supply by AD module zone selective interlocking (Z) by opto-electronic contact on ST and earth (T/W) fault load monitoring (R) adjustment of load limit thresholds by Ic1 and Ic2 settings Ic1 = Ir x ... / Ic2 = Ir x ... time delay tr1 at 1.5 Ic1 time delay tr2 at 1.5 Ic2 output via opto-electronic contact 0.1 A / 240 V time delay for load reconnection communication (COM) 2 outputs for data transmission to Digipact module transmitted values all control unit settings alarms: Ir warning, fault type, self-monitoring load monitoring thresholds current values I1, I2, I3, IN power supply by AD module
Merlin Gerin
(1) Plus the uncertainty of the built-in transformers: 3 %. (2) Max = In x ... 630 A 800 - 1000 A 1200 - 1600 A 2000 A 2500 A 3000 - 3200 A 4000 - 6300 A N1/H1 22 22 22 17 12 10 8 H2 28 28 24 20 14 12 10 L1 14 10 8 6 6
(3) Continuous display for the phase with the greatest load. (4) 0.2 x In to 1200 A without external power supply or 0.1 x In with external power supply. (5) Accuracy with respect to the long time LT protection. (6) Resettable maximum ammeter.
18
STR 18 M
N1, H1, H2
STR 28 D
N1, H1, H2 c 0.5 to 1 (4 settings) 0.8 to 1 (8 settings) fixed 120 7.5 5.2
STR 38 S
N1, H1, H2, L1 c 0.5 to 1 (4 settings) 0.8 to 1 (8 settings) fixed 120 7.5 5.2 c 1.5 to 10 15 % 0 0.1 0.2 0.3 0.1 0.2 0.3 0 80 140 230 80 140 230 350 c I = In x ... fixed at high set (Max) (2) 20 % on types N1 and H1
STR 58 U
N1, H1, H2, L1 c 0.5 to 1 (4 settings) 0.8 to 1 (8 settings) adjustable 15 30 60 120 0.94 1.88 3.75 7.50 0.65 1.30 2.60 5.20 c 1.5 to 10 15 % 0 0.1 0.2 0.3 0.1 0.2 0.3 0 80 140 230 80 140 230 350 c I = In x ... 2 x In to Max (2) 15 % on types N1 and H1
240 15 10
480 30 21
c Im = Ir x ... 1.5 to 10 x Ir 15 %
c c
c c c c c c c I1, I2, I3, IN, Ih, Imax (6) I1, I2, I3 c c 0.1 at 1 (max 1200 A) (4) 15 % 0.1 0.2 0.3 0.4 60 140 230 350 140 230 350 500 c c c
c c c c c c c I1, I2, I3, IN, Ih, Imax (6) I1, I2, I3 c c 0.1 at 1 (max 1200 A) (4) 15 % 0.1 0.2 0.3 0.4 60 140 230 350 140 230 350 500 c c c c c c 0.8 to 1 (8 settings) 1 % (5) 0.5 x tr 0.25 x tr c fixed at 10 s c c c c c c
Merlin Gerin
19
presentation
The STR 68 U control unit offers measurement, supervision and energy management functions. Microprocessor technology, liquid crystal display and function keys ensure high accuracy and easy adjustment. The standard STR 68 U control unit provides the following: c universal protection; c ammeter function; c indication of fault type; c values of interrupted currents; c maintenance indicator; c integrated test. The following options can be added: c power measurement module (P); c "earth fault" protection module; c control and indication modules (M) with or without transmission to a supervisor. Certain M modules can provide load monitoring or zone selective interlocking for earth fault protection.
protection
The STR 68 control unit provides: c overload protection, with long time protection LT including: v adjustable time delay and thermal memory possibility; c short-circuit protection: v delayed, with short time function ST, for which the I2t curve can be disabled by the user, v instantaneous, with the INST function that can be disabled by the user; c ammeter; c maintenance indicator; c fault indications and values of the interrupted currents; c self-monitoring: in the event of overheating of the control unit or a malfunction of the microprocessor, an alarm signal is transmitted. Unless the "service continuity" option was ordered, the circuit breaker will trip ; c test.
c "earth" protection with time discrimination or zone selective interlocking. The protection is of the residual current type (or source ground return type on request).
basic functions
20
Merlin Gerin
optional functions
c power measurement (P); c indication and control (M) Thirty-one different modules offer various combinations of functions including: v load monitoring, v trip indication, v self-monitoring, v zone selective interlocking for "earth fault" protection, v transmission of data to a supervisor (modules M17 to M31 only). Each STR 68 U control unit can be equipped with only one M module. For the function offered by each M module, (see page xxx).
c "earth fault" protection (T) Of the residual current type (or source ground return type on request), it is possible to obtain zone selective interlocking by combining the T option with the appropriate M option.
Merlin Gerin
21
STR 68 U
N1. H1. H2. L1 c 0.4 to 1 (mini 160 A) between 1.05 and 1.20 x Ir adjustable 15 30 60 120 240 480 0.94 1.88 3.75 7.50 15 30 0.65 1.30 2.60 5.20 10 21 standard + OFF position c 0.4 to 15 10 % 0.1 0.2 0.3 0.4 0.1 0.2 0.3 0.4 60 140 230 350 140 230 350 500 standard c M08 to M16 : 65. M20 to M63: 75. from In to fixed pick-up (mini at 1.6 kA) 15 % on types N1 and H1
basic protection
long time protection LT current setting (Ir) adjustable in 2 % steps tripping time delay (tr) accuracy: + 0 - 20 % Ir = In x ...
thermal memory (30 mn) short time protection ST pick-up (Im) adjustable in 4 % steps time delay (tr)
Im = Ir x ... tm setting with I2t OFF tm setting with I2t ON max. overcurrent time before tripping (ms) max. break time (ms)
thermal memory (10 mn) instantaneous protection I fixed pick-up I (kA) pick-up (I) adjustable in 8 % steps accuracy OFF switch on front face
basic functions
fault indication for tripping on a fault for Ir setting overrun indication of fault type and value of interrupted current self-monitoring maintenance indicator displays degree of wear of main contacts ammeter current readings with an accuracy of 3 % self-powered integrated test button on front face fault trip alarm contact (SDE) LED on front face self powered LEDs on front face display on ammeter power supply internal overheating and microprocessor errors c c c c c c 110 V - 220 V - 380 V AC 50/60 Hz c c between 0 and 655 c I1. I2. I3. Imax (1) c c
optional functions
earth fault protection: residual current (T) or source ground return (W) type on request pick-up (Ih) adjustable in 2 % steps Ih = In x ... time delay (th) th setting max. overcurrent time before tripping (ms) max. break time (ms) thermal memory (10 mn) power measurement (P) (see opposite page for details) output characteristics integrated power supply voltage measurements U12. U23. U31 V1N. V2N. V3N frequency measurement: f power factor measurement: cos instantaneous active power measurement: P instantaneous active energy measurement: EP indication and control (M): 31 modules (1 per control unit) providing the following combinations: load monitoring option 1: 2 load limit pick-ups Ic1 and Ic2 Ic1 = In x ... delay tr1 = Ic2 = In x ... delay tr2 = option 2: 1 load limit pick-up Ic1 Ic1 = In x ... 1 load reconnection pick-up Ic2 delay tr1 = Ic2 = In x ... delay tr2 = zone selective interlocking trip indications for type of fault for self-monitoring (1) transmission characteristics type protocol speed max. number of addresses values transmitted: type of fault circuit breaker status self-monitoring settings circuit breaker status values transmitted: ammeter power system status voltmeter power factor, frequency instantaneous active power and energy: P. EP instantaneous reactive power and energy: Q. EQ power supply c (zone selective interlocking with option M) 0.2 to 1 (maxi 1200 A. mini 160 A ) 15 % 0.1 0.2 0.3 0.4 60 140 230 350 140 230 350 500 c c opto-decoupled 0.2 A - 24 V DC c 160 to 690 1 % 90 to 400 V 1 % 45 to 65 Hz 0.5 % - 1 to + 1 2.5 % - 9000 to 9000 kW 5 % 0 to 9999 MWh 5 % c 2 possible options 0.2 to 1 In 2 % steps 0.5 x tr 5 % 0.2 to 1 In 2 % steps 0.25 x tr 5 % 0.2 to 1 In 2 % steps 0.5 x tr 5 % 0.2 to 1 In 2 % steps 60 s fixed 5 % for earth fault protection long-time, short-time, earth alarm RS 485 JBus 9600 bauds 255 tripping on Im, Ir, Ih alarm all pick-ups and delays open or closed currents I1, I2, I3 max voltages U12, U23, U31 voltages V1N, V2N, V3N cos , f - 9000 to 9000 kW. 0 to 9999 MWh 5 % - 9000 to 9000 kVar. 0 to 9999 MVahr 5 % 24, 48, 125 V DC or 100, 240 V AC
(1) Depending on the equipment, the "self-monitoring" alarm signal may or may not trip the circuit breaker, see "service continuity" option on the order form.
Merlin Gerin
23
c c c c
c c c c
c c c
c c c c
c c
c c c
c c c c c
c c c c
c c c
c c c
c c c c c c c c c c c c c c c c c c c c c c
c c c c
c c c (1) c c
c c c
c c
c c
c c
c c
c c c
c c
c c c c
c c c
c c
c c c c c c c
c c
c c
c c
c c c c c c c c c c
c c
24
Merlin Gerin
operating zones
Basic functions: long time LT, short time ST, instantaneous INST
E26039 E26042
t
I2t ON
t
I2t ON I2t OFF
ST INST T
1
I2t OFF
T1
3 4 5
0
Ir Im I
T2
0
earth fault protection settings T1 : earth fault pick-up Ih T2 : earth fault time delay th
overcurrent settings 1 : LT setting Ir (long time) 2 : LT time delay tr (long time) 3 : ST pick-up Im ( short time) 4 : ST time delay tm ( short time) 5 : INST pick-up I (instantaneous)
Ic2 Ic1
Ic2 Ic1
0
load monitoring and control settings Ic1 pick-up (load limit) Ic2 pick-up (load limit)
0
load monitoring and control settings Ic1 pick-up (load limit) Ic2 pick-up (load reconnection)
Merlin Gerin
25
048327
This module is equipped with a button for reactivation, of fault indications that have been de-activated by the battery power-saving feature. A test button is used to check the battery status.
048321
c the direct remote control of the breaker, thanks to two outputs directly controlled through the data transmission. Installation: on vertical plate or symmetrical rail. Power supply: 24 V DC with galvanic isolation, or AD type power module. Installation : on vertical plate or symmetrical rail. Power supply module (AD) is required.
025172
025173
measurements, alarms, maintenance indicator; c MR6 module. Moreover, these modules protect the trip unit from transient overvoltages thanks to galvanic isolation. Available voltages: c AC 50/60 Hz: 110 V, 220 V or 380 V (20 %; +15 %) (consumption 10 VA); c DC : 24/30 V, 48/60 V, 125 V (20 %) (consumption 10 W). Installation: on vertical plate or symmetrical rail. c 12 h with STR 38 and STR 58 control units; c 1.5 h with STR 68 control unit. Installation: on vertical plate or symmetrical rail. (ambient temperature from: 0 C to +50 C).
025171
047035
c for other control units, to check the operation of the trip unit by measuring the actual trip time: v long-time protection, v short-time protection, v instantaneous protection, v earth-fault protection. Power supply: 110, 220 V AC 50/60 Hz. This test kit is common to the Masterpact, Compact NS, C, CM ranges.
052172
26
Merlin Gerin
The protection functions and most of the options available for the STR control units are self-powered. An auxiliary power supply is nevertheless required for certain uses.
self-powered
terminals
battery
STR 28 / 58
protection : LT, ST, INST option I if I u 20% In if I < 20% In or single phase load option F option FV option ALR option R option T/W if Ih u 0.2 x In if Ih < 0.2 x In option C yes yes no no no yes yes yes no (3) no no (1) no (1) no (1) yes (2) yes yes F1/F2 F1/F2 F1/F2 no yes no
no (1) no (1)
yes yes
F1/F2 F1/F2
no no
STR 68
protection : LT, ST, INST, T, W other functions : see drawings page 71
(1) Not recommended: possible with a 24 V DC source, class 2, 5 Watt, ripple factor < 10%. (2) Display will in this case be "iiii". Auxiliary supply allows to save maximeter information. (3) Ih pick-ups for which protection is not self-powered are printed in red on the trip unit front face.
yes
Merlin Gerin
27
auxiliaries
013282
The electrical operating mechanism includes: c the gear motor(MCH); c a closing release (XF); c a shunt release (MX) or an undervoltage release (MN) for opening; c "springs charged" limit switch changeover contact (CH). The addition of the electrical operating mechanism does not alter circuit breaker dimensions.
geared motor MCH 100/127 - 200/240 - 250/277 - 380 - 415 - 440 - 480 180 24/30 - 48/60 - 100/125 - 200/250 180 2 to 3 In for 0.1 s 3 to 4 s
14
Merlin Gerin
035932
Merlin Gerin
15
auxiliaries (cont.)
016813
releases
Two types of voltage releases can be used for remote opening of Masterpact circuit breakers. Undervoltage releases c instantaneous (MN) This release instantaneously opens the breaker when its supply voltage drops below a value between 35 % and 70 % of its rated voltage. If the release is not energised, the breaker cannot be closed (either manually of electrically). Any attempt to close will have no effect on the main contacts. Closing is possible when the release voltage reaches 85 % of its rated value. c time delayed (MNR) To prevent the breaker tripping in the event of transient voltage dips, this release has a built-in time delay. A special version, available on request, allows instantaneous tripping (from a mushroom-head emergency off button) by the wiring of an external contact.
Shunt release (MX) This release instantaneously opens the breaker when energised. The supply can be maintained or automatically disconnected. In the latter case, the user can series connect an internal auxiliary contact (OF).
Note: anti-pumping function: After the breaker has been opened, either by fault trip or by manual or electrical operation, anti-pumping is provided by requiring cancellation of the initial closing command before reclosure of the breaker is possible. The closing release is supplied on request with the manual operating mechanism
characteristics breaker response time at Un operating thresholds opening closing power supply AC 50/60 Hz (V) consumption (VA) DC (V) (2) consumption (W)
036051
100 - 110/127 - 200 - 220/250 - 277 - 380/415 - 440/480 500/525(1) 20 24 - 30 - 48 - 60 - 100/110 - 125 - 200/220 - 250 15
Release combinations Each Masterpact circuit breaker can be equipped with: 1 MX + 1 MN + 1 XF, or 2 MX + 1 XF
(1) 500/525 V AC not available for MNR. (2) MNR: DC, 125 V only.
16
Merlin Gerin
016814
auxiliary switches
In addition to the main contact position indication on the front, 3 auxiliary switch blocks are available to indicate the open and closed breaker positions. c standard: 4 contacts (O) (2 normally open 2 normally closed); c optional: 4 directly-operated double break changeover switches (OF) which operate only when the minimum isolating distance between the main contacts is reached; c optional: 24 additional changeover switches (OFSUP block). These microswitches can be parallel connected in pairs to increase the rated current and breaking capacity (in drawout version only).
018242
016524
In addition to the local "connected/test/ disconnected" position indicator, two series of optional carriage switches are available for the fixed chassis (of drawout circuit breaker). c a block of 4 changeover switches to indicate "connected" position (CE); c a block of 2 changeover switches to indicate "disconnected" position (CD). The disconnected position is indicated only when the minimum isolating distance between main and auxiliary circuits has been reached. By series connection of these contacts the test position can be indicated. c 1 changeover switch to indicate "test" position (CT).
contact characteristics
auxiliary contacts quantity type O changeover NO 2 NO NC 2 NC 10 110 V 240 V 10 380 V 6 480 V 6 600 V 3 48 V 3 125 V 0.5 250 V 0.25 500 V OF 4 OFSUP SDE PF 24 1 1 CE 4 CD 2 CT 1 CH 1
10 15 10 10 10 6 5 3 3 0.5
10 10 6 6 3 3 0.5 0.25
10 10 5
10 10 5
10
10 10 6 6 3 3 0.5 0.25
10 10 6 6 3 3 0.5 0.25
10 10 6 6 3 3 0.5 0.25
Merlin Gerin
17
accessories
013280
035928
Fixed portion of drawout circuit breakers with arc chute and terminal shield
016818
datum rfrence
a b
18
Merlin Gerin
016819
016814
auxiliaries connection
Fixed version Connection by one or two plugs, disconnectable and accessible from the front (screwless tunnel terminals for flex cable up to 2.5 mm2).
Auxiliaries for fixed version
"Connected/disconnect/test" position contacts Installed on the fixed chassis, these contacts are directly connected by 6.35 mm connectors.
Drawout version c standard: connection to a terminal block in the front of the fixed frame (screwless tunnel terminals for flex cable up to 2.5 mm2). The breaker auxiliary circuits are connected by connection blocks that operate automatically to isolate the auxiliaries when the breaker is in "disconnected" position. On request, an additional 5-way terminal block (BS) is available to provide five common points. c optional: by one or two plugs, disconnectable and accessible from the front, installed on the mobile part of the assembly.
015561
035940
Earth connection The earth connection terminal (drawout pattern) is on the left hand side of the chassis. It is marked with the symbol t
Merlin Gerin
19
accessories (cont.)
035932
Remarks c the keylocks are of the captive key type, i.e. key free when locked; c Profalux and Ronis keylocks can be used together; c a second Profalux or Ronis lock, identical to the one mounted on the chassis, can be supplied separately.
(1) keylock types Profalux B24 D4Z Ronis 1351 B Kirk CN22-12 Castell SK7113/1 Trayvou L1P1E
20
Merlin Gerin
door interlock
Optional: mounted on the chassis, this lock prevents the cubicle door from being opened when the breaker is in the "connected" position. If the breaker is put into the "connected" position with the door open, the latter can be closed without disconnecting the breaker.
016817
racking interlock
Optional: this lock prevents insertion of the breaker racking handle when the cubicle door is open. It can be defeated by pressing on the unlocking mechanism. door interlock right-hand side left-hand side racking interlock withdrawal/spring charged interlock
a
a: racking interlock b: door latch
Merlin Gerin
21
053061
Controller
without controller
E33079
053058
Masterpact source-changeover systems can be used to implement various configurations involving several incoming feeders. The two or three Masterpact circuit breakers or switch-disconnectors used are mechanically interlocked to prevent certain combinations of operations. All types of Masterpact devices may be fitted (fixed and drawout versions, three-pole and four-pole, different ratings). The devices may be arranged: c vertically, i.e. stack-mounted and interconnected by a set of rods; c horizontally (two only), i.e. side-by-side and interconnected by a set of cables. An electrical interlock must be used when the source changeover is part of an automatic system.
025186
053060
In this case, the automatic control system to initiate changeovers between the Normal and Replacement sources under predefined conditions must be provided by the customer. Note that we can provide diagrams for the design of various automatic control systems for different sources.
3 2
E33078
1
3
2 3
with controller
E33082
In this case, conditional changeovers between the Normal and Replacement sources are initiated by a Merlin Gerin controller.
IN N GER MERLI
N R N
UN ON / ON / OFF fault
stop
UN =
UR
0,5s
I /O UN = 1
0,5s
I /O
OFF fault
manu
test
R N
4 6
GERIN MERLIN
multi P25M 9
0 . OFF
GERIN MERLIN
multi P25M 660V 92-1 AC3-IEC2 9
0 . OFF
Test
Test
IN N GER MERLI
N R
UR
UN =
stop
manu
test
STOP
gen
erator
R N
5
36
Merlin Gerin
B US
without controller
E33080
In this case, the automatic control system to initiate changeovers between the Normal and Replacement sources under predefined conditions must be provided by the customer. Note that we can provide diagrams for the design of various automatic control systems for different sources.
3 1
3 2
GERIN MERLIN
multi P25M 9
0 . OFF
GERIN MERLIN
multi P25M 660V 92-1 AC3-IEC2 9
0 . OFF
IN N GER MERLI
Test
N R
UR
UN =
0,5s
I /O UN = 1
Test
0,5s
stop
manu
test
R N
4 6
IN N GER MERLI
N R
UR
UN =
stop
manu
test
STOP
generat
or
R N
In this case, conditional changeovers between the "Normal" and "Replacement" sources are initiated by a Merlin Gerin controller.
B US
Merlin Gerin
37
025186
device combinations
All combinations are possible: fixed and drawout versions, three-pole and four-pole, different ratings, circuit breakers or switchdisconnectors. All control units can be used on the circuit breakers.
38
Merlin Gerin
c a motor mechanism (MCH); c a shunt release (MX); c a closing release (XF); c a "ready to close" contact (PF); c a block of 4 changeover switches (OF); c an additional terminal block (BS) and a block of 4 "connected" position switches (CE) for changeover systems including drawout breakers. Option with "lockout after fault" With this option, the circuit breaker must be reset manually after a fault trip. configuration type electrical interlocking automatic control with generator set with permanent "Replacement" source cat. No. 685363 688784 688942
possible combinations Q1 0 0 1 Q2 0 1 0
Q1
Q2
Q1
Q2
Q3
Q1 0 1 0 1 0
Q2 0 0 0 1 1
Q3 0 0 1 0 0
automatic control with permanent "Replacement" source with lockout after fault 685366 without lockout after fault 688183 automatic control with generator set with lockout after fault 689642 without lockout after fault 689644
Q1
Q2
Q3
Q1 0 1 0 0
Q2 0 0 1 0
Q3 0 0 0 1
electrical interlocking with lockout after fault without lockout after fault
688188 688187
Q1
Q2
Q3
Q1 0 1 0 0 1 0 1
Q2 0 0 1 0 1 1 0
Q3 0 0 0 1 0 1 1
electrical interlocking with lockout after fault without lockout after fault automatic control
Merlin Gerin
39
E32704
E32705
IN GERIN MERL
multi P25M 9
0 . OF
F
IN GERIN
MERL
multi P25M 9
IN GERIN
0 . OF
IN GERIN MERL
multi P25M 660V C292-1 AC3-IE 9
0 . OF
MERL
multi P25M 9
0 . OF
Test
Test
Test
RIN IN GE MERL
N R
UR
UN =
B US
UN ON / I ON / OFF /O fault I =1
/O OFF
UN
RIN IN GE MERL
N R
UR
UN =
manu
genera
tor
R N
stop
manu
test
STO P
genera
tor
R N
customer connection
The terminal block and electrical interlocking unit IVE is used to connect the operating mechanism. Control voltage: c 48 to 415 V, 50/60 Hz - 440 V 60 Hz. The IVE control voltage must be the same as the motor mechanism voltage.
40
Merlin Gerin
B US
Test
053058
controller
Controller UA
controller
compatible circuit breakers
BA
UA
4-position switch
automatic operation forced operation on "Normal" source forced operation on "Replacement" source stop (both "Normal" and "Replacement" sources off)
automatic operation
monitoring of the "Normal" source and automatic changeover generator set control load shedding and reconnection of non-priority circuits changeover to the "Replacement" source if one of the phases of the "Normal" phase is absent
test
by opening the P25M circuit breaker supplying the controller by pressing the test button on the front of the controller
indications
circuit breaker status indication on the front of the controller: on, off, fault trip, automatic mode indicating contact automatic mode indicating contract c c c c c c c c c c
other functions
selection of type of "Normal" source (single-phase or three-phase) voluntary transfer to "Replacement" source (e.g. energy management commands) during peak-tariff periods (energy management commands), forced operation on "Normal" if "Replacement" source not operational supplementary control contact (not carried out by the controller). Transfer to "Replacement" source only if contact closed. (ex: UR frequency control) setting of maximum startup time for the replacement source c
power supply
control voltages (1) 220 to 240 V 50/60 Hz 380 to 415 V 50/60 Hz - 440 V 60 Hz c
options
communication option
(1) The same voltage must be used for the ACP plate, the IVE unit and the circuit breaker motor mechanisms. If this voltage is the same as the source voltage, then the Normal and Replacement sources can be used directly for the power supply. If not, a BC type or equivalent isolation transformer must be used.
Merlin Gerin
41
MERLIN GERIN
compact / masterpact
UN ON/I OFF/O
UR ON/I
UN = 0
2 4 t1 1 8 s 15 0.5 0.1 30
0.5s
0.5s
OFF/O
t2 s
15 30 8 60 120 4 0.1 240
fault
UN = I
c integrated terminal block for connection of the following signals: v inputs: order for voluntary transfer to source R (e.g. energy management commands), supplementary control contact: (not carried out by the controller). Transfer to "Replacement" source only if contact closed (ex: UR frequency control), v outputs: indication of operation in automatic mode. Connection to the terminal block: see p.XXX. c controller BA can be tested by opening the P25M circuit breaker on the N circuit, thus simulating a failure of UN. See detailed transfer steps on page XXX.
E30184
Time delay settings: QN: Masterpact circuit breaker with motor mechanism on Normal source, QR: Masterpact circuit breaker with motor mechanism on Replacement source, t1: time delay before QN opens when the voltage UN of the Normal source disappears, t2: time delay before QR opens when the voltage UN of the Normal source is restored.
42
Merlin Gerin
off
QN et QR open
operat. on source N
N I
R O
"auto"
UN fail (duration > t1) or voluntary switching order received UR present and supplementary control contact NR closed duration a 1 s QN opens t > 0,5 s
QR opens
reset
QN ferm N I R O
operat. on source N
operat. on source R
N O
R I
QR opens
E32708
t > 0,5 s
4-position switch in "R" position UR present and supplementary control contact NR closed QN closes QN opens
QR closes
QR closed
N O R I
operat. on source R
Merlin Gerin
43
Controller UA can be used with Masterpact circuit breakers to implement a sourcechangeover system offering the following automatic functions: c switching from one source to another depending on the presence of voltage UN on the "Normal" source; c control of an engine generating set; c shedding and reconnection of non-priority circuits; c switching to the "Replacement" source in the event of a failure on one of the phases of the "Normal" source. Electrical characteristics Power is supplied from the auxiliaries control plate ACP. The same voltage must be used to supply the ACP plate, the IVE unit and the circuit breaker motor mechanisms. If this voltage is the same as the source voltage, the "Normal" and "Replacement" sources can be used directly for the power supply. If not, a BC type or equivalent isolation transformer must be used. Control voltages c 220 to 240 V 50/60 Hz; c 380 to 415 V 50/60 Hz - 440 V 60 Hz.
E30183
MERLIN GERIN
compact / masterpact
UN ON/I OFF/O
UR ON/I OFF/O
t2 s t4 s
N
5 10
UN = 0
8 15 0.5 0.1 30
t1 s
5 10 t3 2 15 s 20 1 0.5 30
fault
UN = I
test
t5 s
R
STOP
generator
Time delay settings: QN: Masterpact circuit breaker with motor mechanism on Normal source, QR: Masterpact circuit breaker with motor mechanism on Replacement source, t1: time delay before QN opens when the voltage UN of the Normal source disappears, t2: time delay before QR opens when the voltage UN of the Normal source is restored, t3: time delay before QR closes once QN has opened and the load has been shed, t4: time delay before QN closes once QR has opened and the load has been reconnected, t5: time delay for confirmation of presence of UN before stopping the generator set.
Operation c a four-position switch can be used to select: v automatic operation; v forced operation on source N; v forced operation on source R; v stop (circuit breakers open and manual operation); c adjustment of time delays in front: v t1 from 0.1 to 30 seconds; v t2 from 0.1 to 240 seconds; v t3 from 0.5 to 30 seconds; v t4 from 0.5 to 30 seconds; v t5 from 60 to 600 seconds; c circuit breaker status indication on the front of the controller: on, off, fault trip; c test button on the front of the controller to check the transfer from the Normal source to the "Replacement" source and the return to the "Normal" source;
c integrated terminal block for connection of the following signals: v inputs: order for voluntary transfer to source R (e.g. energy management commands), supplementary control contact: (not carried out by the controller). Transfer to "Replacement" source only if contact closed (ex: UR frequency control), v outputs: control of engine generator set, load shedding of non-priority circuits, indication of operation in automatic mode; c 3 switches provide the following functions: v selection of the type of "Normal" source, i.e. single-phase or three-phase; v enable or disable voluntary energy management transfer if the "Replacement" source is not operational; v selection of the maximum tolerated starting time for the engine generator set ("Replacement" source): 120 s or 180 s. In automatic mode, this communications option also offers the possibility of remote forced operation on the Replacement source.
Batibus option for controller UA A communication function can be used to check the following from a remote location: c status of the circuit breakers (open, closed or fault trip); c voltage presence on the Normal and Replacement sources; c presence of an order forcing operation on the Replacement source (e.g. for energy management purposes); c values of settings and configurations, c status of the non-priority circuits (whether subject to load shedding or not).
44
Merlin Gerin
stop
QN and QR open
operat. on source N
N I
R genset off O
"auto"
UN fails (duration > t1) or voluntary switching order received duration a 1 s genset startup t > t4
reset
end of reset
UR present for t < 120 s or 180 s and supplementary control contact NR closed QN opens and load shedding QN closed operat. on source N QR closes
QN closes
"stop" t > t3
N I
R genset off O
QR closed
operat. on source R
N O
R genset on I
E30186
UN present for t > t2 or voluntary switching order stopped QR opens and load reconnection
genset startup t > t4 UR present for t < 120 s or 180 s and supplementary control contact NR closed QN closes QN opens and load shedding QN closed t > t3 genset remains on QR closes UN present for t > t5 and no voluntary switching order received QR closed genset off operat. on source R UR absent action on 4-position switch
N O
R genset on I
Merlin Gerin
45
AC15 6 5 4 3 -
DC13 2 -
46
Merlin Gerin
general
installation
Masterpact circuit breakers must be installed in the vertical position on a base plate or on rails.
Installation on rails
The drawout version makes it possible to: c rapidly remove and/or replace the circuit breaker without having to deal with connections; c install stand-by outgoers in a switchboard that will receive the necessary circuit breakers later in time
E31254
E31255
E31256
26
45
E31257
305
"Connected" position
42
Merlin Gerin
safety clearance
Certain distances must be maintained between a circuit breaker and other elements such as panels, bars and other circuit breakers. Taken together, these distances form the safety clearance for the circuit breaker. The diagrams and the table below indicate the required distances when installing Masterpact circuit breakers.
These distances are the results of tests carried out in accordance with standard IEC 947-2 and are in part determined by the ultimate breaking capacities.
100 A
100
C
E31230
A A B B
to insulated barrier A B C front connection without cover (1) 360 30 0 rear connection without cover 150 30 20 rear connection with cover 0 0 20
D (2) 0 0 0
C 95 95
D (2) 0 0
C 495 125
D (2) 0 0 0
100 A
C
E31231
213
to insulated barrier A B front connection without cover (1) 300 15 rear connection without cover 150 15 rear connection with cover 0 0
C 0 45 45
C 45 45
C 445 75
(1) Shield necessary. (2) D is the clearance required for connection of auxiliaries. D = 0 for fixed circuit breakers (required clearance included in the height of the connection plugs). D = 0 for drawout circuit breakers as well.
Merlin Gerin
Note: For the fixed circuit breakers, a clearance of 130 mm is required on top for removal of the arc chutes.
43
Masterpact: connection
general
Four types of connection are possible: c rear horizontal; c rear vertical; c front; c mixed. The terminals are sized to allow circuit breaker connection with bars up to 20 mm thick (except for the M40, M50 and M63).
016806 016807
Conductor materials The terminals of Masterpact circuit breakers can be used to connect bare copper, tinned copper or tinned aluminium conductors without any special surface treatment.
Front connection
016808 025179
Mixed connection. Upper terminals: front connection. Bottom terminals: vertical connection.
electrodynamic forces
c the first bar spacers must be located at less than a certain distance from the circuit breaker connection point;
c this maximum distance must be respected to withstand the electrodynamic forces that are applied between the bars during a short-circuit.
Maximum distance between circuit breaker connection point and the first bar spacers for various short-circuit currents
Isc (kA) distance (mm) 30 350 50 300 65 250 80 150 100 150 150 150
44
Merlin Gerin
Note: The indicated values come from tests and theoretical calculations made for the parameters given below. These tables are intended to serve as a general guide for connection design and not to replace experience acquired for a certain type of connection or the need for subsequent tests. c maximum admissible bar temperature: 100 C; c temperature in the switchboard around the circuit breaker and its connections: Ta; c copper busbars.
E31258
Merlin Gerin
45
Masterpact: connection
general
example
Data: c drawout circuit breaker; c flat busbars; c temperature: Ta = 50 C; c operating current: 1800 A.
E31258
Solution: For Ta = 50 C; table 2 indicates an M20 circuit breaker connected either with three 80 x 5 mm bars or two 63 x 10 mm bars.
E31259
46
Merlin Gerin
Merlin Gerin
E31259
47
Masterpact: installation
dimensions
E30748
3 or 4 poles
E30742
necessary space for removing the arc chutes (with or without arc chute cover) 90 130
E30749
45
311
(*)
(*)
30 mini 60 maxi
150 290
68
11
11 515
11 11
537 (4p)
(*) Datum
mounting
on a base plate
E30765 E30766
on rails
E30775
mounting detail
14
11
2 11 x 6
150
A B
cut-outs
cut-outs de porte
E30764 E30763
152,5
270 (*)
11 5
180
180
17,5
(*) Datum
48
Merlin Gerin
Masterpact: installation
dimensions
E30746 E30741
45
439
(*)
E30747
3 or 4 poles
"disconnected" position
55
175 367 85
55 55 (*)
70
(*) Datum
mounting
on a base plate
E30767 E30768
on rails
E30775
mounting detail
14
11
2 11 x 6
101
175
101
175
A B
cut-outs
front panel cut-out
E30761
ACB's side
152,5
270
71,5
19
148,5 69 18,5
11 5
180
180
17,5
Merlin Gerin
49
Masterpact: installation
dimensions
E31226
necessary space for removing the arc chutes (with or without arc chute cover) 90 130
E30752
E30753
3 or 4 poles
45
311
(*)
(*)
30 mini 60 maxi
150 290
68
11 11 780
11
11
(*) Datum
mounting
on a base plate
E30771 E30772
on rails
E30775
mounting detail
14
11
2 11 x 6
50 maxi
30 mini 60 maxi
150
50 maxi
A B
cut-outs
front panel cut-out
E30764 E30763
152,5
270 (*)
11 5
180
180
17,5
(*) Datum
50
Merlin Gerin
Masterpact: installation
dimensions
E30750
3 or 4 poles
E30743
"disconnected" position
E30751
45
439 484 800 mini 128 60 101 175 367 85 (*) (1)
70 60 350
55 55 (*)
mounting
on a base plate
E30773 E30774
on rails
E30777
mounting detail
40 40 30
(1)
175
2 11 x 6 (3p) 6 11 x 22 (4p)
101
175
cut-outs
front panel cut-out
E30762
ACB's side
152,5
51
Masterpact: installation
dimensions
E30757
3 poles
E31227
necessary space for removing the arc chutes (with or without arc chute cover) 90 130
E30756
819 759
45
311
(*)
(*) 30 mini 60 maxi
150 290
68
11
780 802
11
(*) Datum
mounting
on a base plate
E30771 E30772
on rails
E30775
mounting detail
14
11
2 11 x 6
50 maxi
30 mini 60 maxi
150
50 maxi
A B
cut-outs
front panel cut-out
E30764 E30763
152,5
270 (*)
71,5 14,5 148,5 69
(*) Datum
52
Merlin Gerin
Masterpact: installation
dimensions
3 or 4 poles
E30744 E30754
"disconnected" position 45 45
E30755
60 40 475
350
55 55 (*)
(*) Datum
mounting
on a base plate
E30769 E30770
on rails
E31228
mounting detail
40 40 30
175
6 11 x 22 (3p) 6 11 x 33 (4p)
101
175
101
175
cut-outs
front panel cut-out
E30762 E30760
ACB's side
152,5
53
Masterpact: installation
dimensions
3 poles or 4 poles
E30745 E30758
"disconnected" position 45 45
E30759
484
(*)
175 367
85
40
475 1045
475
55 (*)
(*) Datum
mounting
on a plate
E30769 E30770
on rails
E30778
mounting detail
40 40 30
175
101 175
6 11 x 33
101
175
cut-outs
front panel cut-out
E30762
side of c.b.
E30760
152,5
270 47
71,5 148,5 69 18,5 11 5 180 180 17,5
19 55 325
base of c.b.
54
Merlin Gerin
Masterpact: installation
source-changeover system
50 50 5 40 125 52 30 125
14
30
900 max.
153
163
(*) 45 65 166 base of c.b. for ratings : M08 to M40 (3p) base of c.b. for ratings : M40 (4p) to M63 82 (*)
44 (*)
50
5 14 60
40 180
52
60
900 max.
50
50
5 14 60
40 180
52
60
153
163
(*) 45 65 166 base of c.b. for ratings : M08 to M40 (3p) base of c.b. for ratings : M40 (4p) to M63 100
62 (*)
(*) Datum
Merlin Gerin
55
Masterpact: installation
source-changeover system
2m maxi
H47 H43
H48 H49
controller
N R
E33353
10
L33
P58
L34 L35
P62
P60
2100 1940
E33354
H51
1640
H50
H52
940
L36 L37
C34
C34
H47 151
H48 137
H49 160
H50 200
H51 255
H52 22
L33 6
L34 48
L35 84
L36 138
L37 150
P58 61,5
P59 170
P60 95
P61 90
Masterpact: connection
rear connection
E30786
front connection
115 115 115 45 25 10 85
N
10 335 112 25 50
(1)
2 12
(*)
132
E30787
rear connection
horizontal terminals
115 115 115 45 25 10 85
53 12,5 175 (**) (*) 221 10 233 278 12,5 12,5 107 15 17 17,5 23
2 12 (*)
vertical terminals
E30788
115
115
115
85 10
(*) Datum. (**) Hole for securing front connection support bracket. (1) On request, neutral on the right.
2 12 (*)
rear connection
E30790
front connection
115 115 115 47,5 80 25 25 15
12,5
N
(1)
10 45
3 12 (*)
306
rear connection
112 25 112
E30791
horizontal terminals
115 115 115 25 47,5 45 10
10
74,5
12,5
2 12 (*)
vertical terminals
E30792
115
115
115 8
47,5
2 12 (*)
57
Masterpact: connection
rear connection
E30901
front connection
115 115 115 80 25 25 15 85
N
10 335 112 25 25
E30832
(1)
80
3 12
(*)
132
rear connection
horizontal terminals
115 115 115 80 25 25 15 85
53 107
(*)
221 10 233 278 12,5
E30794
12,5
3 12
(*)
vertical terminals
115 115 115 10 85
(*) Datum. (**) Hole for securing front connection support bracket. (1) On request, neutral on the right.
3 12 (*)
rear connection
E30790
front connection
115 115 115 47,5 80 25 25 15
12,5
N
(1)
10 80
3 12 (*)
306
rear connection
112
E30796
horizontal terminals
115 115 115 47,5 80 25 25 15
3 12 (*)
vertical terminals
E30797
115
115
115 10
47,5
3 12 (*)
Merlin Gerin
58
Masterpact: connection
rear connection
E30901
front connection
115 115 115 80 25 25 15 85
N
(1)
335 20 112 25 25 152
E30832
80
3 12
(*)
rear connection
horizontal terminals
115 115 115 80 25 25 15 85
53 107
15 3 15 18 17,5 12,5
3 12
(*)
vertical terminals
115 115 115 20 85
(*) Datum. (**) Hole for securing front connection support bracket. (1) On request, neutral on the right.
3 12
(*)
rear connection
E30790
front connection
115 115 115 47,5 80 25 25 15
12,5
N
(1) 3 12 (*)
20 80
306
rear connection
112
E30796
horizontal terminals
115 115 115 47,5 80 25 25 15
3 12 (*)
vertical terminals
E30801
115
115
115 16
47,5
3 12 (*)
59
Masterpact: connection
rear connection
E30901
front connection
115 115 115 80 25 25 15 85
N
(1)
3 12
(*)
rear connection
25 25 25 162
horizontal terminals
115 140 115 72,5 85,5 25 25 11,5
53 87
175 (**)
18 15 268
15 18
12,5 15
(*)
221 30 236
3 12
(*)
vertical terminals
E30804
115
140
140
60 25
4 12
(*)
(*) Datum. (**) Hole for securing front connection support bracket. (1) On request, neutral on the right.
60
Merlin Gerin
Masterpact: connection
rear connection
E30806
front connection
115 125 125 100 25 25 25 12,5 37,5
N
(1)
100
4 12
(*)
30 363 112
rear connection
horizontal terminals
25 157 25 25 34,5
E30807
115
125
125 100 25 25 25
37,5 12,5
12,5
4 12
15 15
(*)
vertical terminals
E30808
115
152,5
152,5
10 25
4 12
(*)
61