Professional Documents
Culture Documents
Thread Types and Uses
Thread Types and Uses
02 2007/2
Pitch in T.P.I. USA, UK and Canada Pitch in T.P.I. UK Pipe fitting with straight threads. Pitch in T.P.I When pressure-tight joints are not USA, UK and Canada made on the thread Pipe fitting with straight threads. When pressure-tight joints are not Pitch in T.P.I. made on the thread Only in 28, 19, 14 and 11 TPI Pitch in T.P.I. Planned to be made redundant Pitch in mm When movement is transferred to rails
Pitch in T.P.I. USA, UK and Canada Pitch in T.P.I. R is an external tapered thread. Rc is an internal tapered thread. Rp is a straight internal thread. Only in 28, 19, 14 and 11 TPI
R, Rc, BSPT
Pipe fittings with a tapered thread. When pressure-tight joints are made on the thread. Pipe fittings with a tapered thread. When pressure-tight joints are made on the thread
Pitch in i T.P.I. Only in 27, 18, 14, 11 and 8 TPI Pitch in T.P.I. Flank angles are not equal and vary depending on use and material. Pitch in T.P.I. Only in 10,8, 6 and 4 TPI
Butt, Buttress
Rd
Pg
Electronics
There are many other screw thread types. We welcome suggestions for updates to this page.
WWW.F-M-S.DK