Professional Documents
Culture Documents
Thermochemistry Important Notes
Thermochemistry Important Notes
1. Exothermic reaction : Chemical reaction that releases heat to the surroundings. The temperature of the reaction mixture will increase. 2. Endothermic reaction : Chemical reaction that absorbs heat from the surroundings. The temperature of the reaction mixture will decrease. 3. Energy is absorbed to break a chemical bond. 4. Energy is released when a bond is formed. 5. For an exothermic reaction, {energy absorbed for bond breaking} < {energy released from bond formation} , - H 6. For an endothermic reaction, {energy absorbed for bond breaking} > {energy released from bond formation} , + H 7. Heat of Precipitation is the energy change when 1 mole of precipitate is formed from its ions. 8. Heat of Displacement is the energy change when 1 mole of metal is displaced from its solution by a more electropositive metal. 9. Heat of Neutralisation is the heat released when 1 mole of H ions react with 1 mole of OH ions to produce 1 mole of water. 10. Heat of Combustion is the heat released when 1 mole of a substance is completely burnt in excess oxygen. 11. Fuel Value or Heat Value is the heat energy when 1g of fuel is burnt completely burnt in excess oxygen. Its unit is kJg.
Heat of Displacement 1. Polystyrene cups are used because they are poor heat conductors and this prevents heat loss to the surrounding. 2. Magnesium powder and not Magnesium granules are used to displace Copper from its salt solution because Magnesium powder has a larger surface area, the reaction will take a shorter time to complete, thus less heat is lost to the surrounding. 3. Excess Magnesium powder is added to ensure all the copper (II) ions are displaced to form Copper.
Heat of Combustion 1. Flame from the burning of alcohol must always touch the base of copper can. 2. Thin copper can is used to maximize the transfer of heat as it is a good conductor of heat. 3. Wire gauze is not used because it will absorb some of the heat given out during combustion. 4. The flame of the lamp is placed as close as possible to the base of the copper can so that a bigger area of flame can be in contact with the copper can. 5. When the flame has been put out, the lamp must be weighed immediately because alcohol evaporates easily. 6. Water in copper can must be stirred throughout the whole experiment to ensure that the temperature of the water is uniform. 7. Windshield is used to shield the flame from air current and to reduce heat loss to surrounding.