Professional Documents
Culture Documents
Problem. A well and reservoir have the following characteristics: The well is producing only oil; it is producing at a constant rate of 20 STB/D. Data describing the well and formation are:
=0.72 cp k = 0.1 md ct = 1.5 x 10-5 psi-1 pi = 3000 psi re = 3000 ft rw = 0.5 ft Bo = 1.475 RB/STB h = 150 ft = 0.23 s=0
Calculate the reservoir pressure at a radius of 1 ft after 3 hours of production; then, calculate the pressure at radii of 10 and 100 ft after 3 hours of production.
Check Ei applicability - line source not accurate until (lek note: Ei function can be used when t is greater than:- )
t > 3.79x10 k
5 2 c t r w
Time in hours
Check reservoir is infinite acting - the reservoir is infinite acting if the time,
(lek note: Ei function can be used when the t is less than:- )
Time in hours
First 2 tests show that Ei function can be used after some time (1st test), and after that as long As at that time the reservoir is still infinite acting
x < 0.01
Solution. The Ei function is not an accurate solution to flow equations until t>3.79 x 105 ctr2w/k 3.79 x 105 x 0.23 x 0.72 x 1.5 x 10-5 x 0.52 /0.1 = 2.35 < t = 3hrs t = 3 hrs > 2.35 (condition satisfied!) To check that reservoir is still infinite acting; the reservoir is infinite acting until t<948 ctr2e/k 948 x 0.23 x 0.72 x 1.5 x 10-5 x 30002 / 0.1 = 211, 935 hrs. t = 3 hrs < 211935 (reservoir is infinite acting)
At radius 1 ft
At radius 10 ft
At radius 100 ft