Professional Documents
Culture Documents
Beam Ledge Design: Inputs or Parameters
Beam Ledge Design: Inputs or Parameters
Inputs or Parameters: Block Thickness Ledge Thickness Height of Block Placing Overhang of Ledge fy f'c Loadings : P (due to block ) = = 2.1168 k/ft 0.07 k/ft 4 in Thick LEDGE M M = = PL+ WL 2 2.1518
2
9 4 14 1 60 3
SLAB
BEAM
W (Self Wt of Ledge )
Kft
As = As(min) =
2 0.183915 in /ft 2
0.1584 As
If As is less than As(min) then Increase As by 33 % i.e. Multiply As by 1.33 and Then Choose the minimum area of steel from As and As(min) Since As > As(min) As(min) Governs 0.1584 in2/ft
Use Provide
# #
3 3
@ @
SHEAR CHECK
Vu = P + W = Vc = 2 f'c. b.d = 2.1868 4.469 kips kips
Since Vc
>
Vu
Safe
DEFLECTION CHECK
Ec = I = 3143.92748 psi 64 inches or 3.143927
1)
1 =
5.wl
7.82759E-09 inches
Total Deflection ( ) =
0.000379 inches