Router(config)# router eigrp AS number (Must be the same on all routers) Router(config-router)# network network-address [wildcard mask] EIGRP Interface commands Router(config-if)# ip summary-address eigrp as-number network-address mask RTC(config-if)#ip summary-address eigrp 2446 2..!.! 2"".2"".!.! Router(config-if)# no auto-summary auto-summary on by default !"#R$ summari%es automatically between classful boundaries Must be used for &'(M Router(config-if)#bandwidt# kilobits Configures the bandwidth used by routing metrics on the outgoing interface Router(config-if)#ip bandwidt#-percent eigrp as-number bandwidth-percentage )y default* !"#R$ is set to use only u+ to ,-. of the bandwidth of an interface to e/change routing information Router(config-router)#eigrp log-neig#bor-c#anges This command enables the logging of neighbor ad0acency changes to monitor the stability of the routing system and to hel+ detect +roblems RT1(config-router)# $ariance number The $ariance command instructs the router to include routes with a metric less than or e2ual to n times the minimum metric route for that destination* where n is the number s+ecified by the 3ariance command %iscellaneous Router(config-router)# default-metric "6 !! 2"" ! "!! {k values) &#ow commands Router# s#ow ip eigrp neig#bors 4dis+lays neighbors5 Router# s#ow ip eigrp topology Router# s#ow ip eigrp topology all links dis+lays to+ology* acti3e6+assi3e (well) state* successors Router# debug eigrp fsm Router# debug eigrp packet Router# s#ow ip route eigrp 4!"#R$ routes in routing table5 Router# s#ow ip protocols 1( number* filtering* redistribution* neighbors* distance Router# s#ow ip eigrp traffic !"#R$ +ackets sent and recei3ed Redistribution E'ample 7 !"#R$ and "#R$ redistributes automatically as long as the same +rocess- id is used Router(config)# router eigrp 44 and Router(config)# router igrp 44