Professional Documents
Culture Documents
Nu Horizons Electronics - Portal December 2009
Nu Horizons Electronics - Portal December 2009
Conexant’s Single-chip
Audio Solution
In This Issue:
Audio/Video
Conexant
Gennum
Bus Interface
Exar
Converters
Linear Technology
Development Tools
Xilinx
Disk / Interface
Gennum
Microcontrollers
Atmel
Renesas
STMicroelectronics
Sensors
IDT
December 2009
Single-chip
Single-chipAudio
Single-chip Audio Solution
AudioSolution Solution
Award-winning Device Enables Superior Audio Quality
Award-winning Device Enables Superior Audio Quality
Award-winning Device Enables Superior Audio Quality
Audio / Video
Conexant’s
Conexant’sembedded
embedded audio solutions
audio solutionsintegrate keykey
integrate speaker
speakertechnology
technologyandand
processing
processingfunctionality
functionalityintointo
a single
a single
cost-effective
Conexant’s device.
cost-effective
embedded An
device. on-chip
Ansolutions
audio DSP
on-chip DSP runs a suite
runskey
integrate of
a suite innovative
speakerof innovativeConexant
technology Conexantproprietary
proprietary
and processing voice processing
voice processing
functionality algorithms
into a singlealgorithms
cost-effective device.
andon-chip
An audio
and post-processing
DSP
audio runs a suiteeffects
post-processing thatthat
of effects
innovative dramatically
Conexant
dramatically improve
proprietary
improvesound
voice quality
sound for for
processing
quality audio entertainment
algorithms
audio and audio
entertainment and voice
post-processing
and voice effects that
dramatically improve
communication sound quality
applications. The for audio
embedded entertainment
audio SoCs and
arevoice communication
high-performance, applications.
high-quality
communication applications. The embedded audio SoCs are high-performance, high-quality devices that contain The embedded
devices that audio
contain SoCs are high-
performance,
many featureshigh-quality
which devices
lower that contain
manufacturing many
costs, features
allow for which lower
product manufacturing
customization, and costs,power
save allow and
for product
time. customization, and
many features which lower manufacturing costs, allow for product customization, and save power and time.
save power and time.
Key Features
Key and
Features Benefits
and Benefits
Key Features and Benefits
• •Single-chip solution
Single-chip with
solution integrated
with integrated DSP, codec,
DSP, andand
codec, amplifier
amplifier
• Single-chip
Advanced DSP
solutionalgorithms
with and
integrated audio
DSP,
• Advanced DSP algorithms and audio post-processingpost-processing
codec, and effects
amplifier for for
effects superior audio
superior andand
audio voice quality
voice quality
• Advanced
Class-D DSP algorithms
amplifier enables andhigher
audio audio
post-processing
performanceeffects
with for
lowsuperior
power audio and voice quality
consumption
• Class-D amplifier enables higher audio performance with low power consumption
Class-D amplifier enables higher audio performance with low power consumption
• Small
•Small footprint
Small andand
footprint
footprint low low
and bill-of-materials
low cost cost
bill-of-materials
bill-of-materials cost
• Embedded
•Embedded
Embedded configuation
configuation toolbox
toolbox
configuation for for
for quick
toolbox quick customization
customization
quick andand
performance
and performance
customization optimization
optimization
performance optimization
• Turnkey reference
Turnkey design
reference and
design fast
and time-to-market
fast time-to-market
• Turnkey reference design and fast time-to-market
Applications
Applications
Embedded Audio
Embedded Product
Audio Comparison
Product Comparison
Part
PartNumber
Part Number
Number
Feature
Feature
Feature
CX20562
CX20562
CX20562 CX20662
CX20662
CX20662 CX20663
CX20663
CX20663 CX20702
CX20702
CX20702 CX20709
CX20709
CX20709
I2IS/PCM
2
S/PCM (5 wires
(5 wires
I2S/PCM interface)
interface)
(5 wires interface) No No
No No No
No NoNo No 11 1 1 11
USB
USB Client
Client
USB 1Client No1 1 No No
No 1No No 11 1 1 11
I2IC2C
(2I(2Cor
2or 3 3orwires)
(2wires)3/SPI /SPI/SPI
(Slave)
wires) (Slave)
(Slave) No No
No No No
No NoNo No 11 1 1 11
Class-D
Class-D Amplifier
Amplifier
Class-D Amplifier 600 mW-rms
600600
mW-rms x 2 x 2 x 2 600
mW-rms mW-rms
600600
mW-rms x 1 x 1 x 1 600
mW-rms 600600
mW-rms
mW-rms x 2 x 2x 2
mW-rms No No
No 2.5W x 2xx(avg.)
2.5W
2.5W 2 2(avg.)
(avg.)
Stereo PWM
Stereo
Stereo PWM PWMOutput
Output Output No
No No No
No No No
No No 11 1 1 11
Stereo Microphone
Stereo
Stereo Microphone
Microphone In In In 11 1 Mono
Mono Mono Mono
Mono Mono 11 1 1 11
Acoustic
Acoustic
Acoustic Echo
Echo Cancellation
Echo Cancellation
Cancellation YesYes
Yes YesYes
Yes YesYes
Yes YesYes
Yes YesYes
Yes
Line Echo Cancellation No LineLine
Line Echo Echo
Echo
Supression NoNo No
Line Echo Cancellation
Line Echo Cancellation No No No No No YesYes
Yes
Supression
Supression
LCD Interface Yes No No No No
LCD Interface
LCD Interface YesYes No No No No No No No No
20 Keypad Buttons Yes No No No No
20 Keypad
20 KeypadButtons
Buttons YesYes No No No No No No No No
www.conexant.com
www.conexant.com
2
For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal
Gennum’s 3G-SDI Solutions
The most comprehensive, end-to-end portfolio of
Audio / Video
broadcast video solutions with a commitment towards
unmatched performance and signal integrity.
ENABLING THE NEXT GENERATION OF BROADCAST VIDEO EQUIPMENT
Gennum’s award winning portfolio of professional and broadcast solutions includes Equalizers,
Reclockers, Cable Drivers, Serializers/Deserializers, Timing and Clock Cleaners, Video Optical
modules and PCI Express solutions.
3
Full-Speed USB Universal Asynchronous
Receiver Transmitter Series
B us I nterface
The USB interface also supports USB suspend, resume and remote wakeup operations. The V141x operates from an internal 48MHz clock
therefore no external crystal/oscillator is required like previous generation UARTs. With the fractional baud rate generator, any baud rate can
accurately be generated using the internal 48MHz clock. The large 128-byte TX FIFO and 384-byte RX FIFO of the V141x helps to optimize the
overall data throughput for various applications. The Automatic Transceiver Direction control feature simplifies both the hardware and software
for half-duplex RS-485 applications. The multidrop (9-bit) mode with automatic half-duplex transceiver control feature further simplifies typical
multidrop RS-485 applications.
The V141x operates from a single 2.97 to 3.63 volt power supply and has 5V tolerant inputs. Virtual COM port drivers for Windows 2000, XP, Vista,
and CE, as well as Linux and Mac are supported for the XR21V1410, XR21V1412 and XR21V1414.
Features
USB 2.0 Compliant Interface
Supports 12 Mbps USB full-speed data rate
Supports USB suspend, resume and remote
wakeup operations
Enhanced UART Features
Data rates up to 12 Mbps
Fractional Baud Rate Generator
128 byte TX FIFO
384 byte RX FIFO
7, 8 or 9 data bits, 1 or 2 stop bits
Automatic Hardware (RTS/CTS or DTR/DSR)
Flow Control
Automatic Software (Xon/Xoff) Flow Control
Multidrop mode w/Auto Half-Duplex
Transceiver Control
Multidrop mode w/ Auto TX Enable
Half-Duplex mode
Selectable GPIO or Modem I/O
Internal 48 MHz clock
Single 2.97-3.63V power supply
5V tolerant inputs
Virtual COM Port drivers
Windows 2000, XP and Vista
Windows CE 4.2, 5.0, 6.0
Linux
Mac
Portable Appliances
External Converters (Dongles)
Battery-Operated Devices
Cellular Data Devices
Factory Automation and Process Controls
Industrial Applications
4
For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal
LTC2175-14 - 14-Bit, 125Msps Low
Power Quad ADCs
C onverters
Dissipate one-third the power of competing ADCs
The LTC®2175-14/2174-14/2173-14 are 4-channel, simultaneous sampling
Features
14-bit A/D converters designed for digitizing high frequency, wide dynamic
range signals. They are perfect for demanding communications applications 4-Channel Simultaneous Sampling ADC
73.1dB SNR
with AC performance that includes 73.1dB SNR and 88dB spurious free
88dB SFDR
dynamic range (SFDR). Ultralow jitter of 0.15psRMS allows undersampling Low Power: 558mW/450mW/376mW Total,
of IF frequencies with excellent noise performance. 140mW/113mW/94mW per Channel
Single 1.8V Supply
Serial LVDS Outputs: 1 or 2 Bits per Channel
DC specs include ±1LSB INL (typ), ±0.3LSB DNL (typ) and no missing
Selectable Input Ranges: 1VP-P to 2VP-P
codes over temperature. The transition noise is a low 1.2LSBRMS. 800MHz Full Power Bandwidth S/H
Shutdown and Nap Modes
The digital outputs are serial LVDS to minimize the number of data lines. Serial SPI Port for Configuration
Each channel outputs two bits at a time (2-lane mode). At lower sampling Pin Compatible 14-Bit and 12-Bit Versions
52-Pin (7mm × 8mm) QFN Package
rates there is a one bit per channel option (1-lane mode). The LVDS drivers
have optional internal termination and adjustable output levels to ensure
clean signal integrity. Applications
Communications
Cellular Base Stations
The ENC+ and ENC– inputs may be driven differentially or single-ended
Software Defined Radios
with a sine wave, PECL, LVDS, TTL, or CMOS inputs. An internal clock duty
Portable Medical Imaging
cycle stabilizer allows high performance at full speed for a wide range of Multichannel Data Acquisition
clock duty cycles. Nondestructive Testing
LTC2175-14, 125Msps,
2-Tone FFT, fIN = 70MHz and 75MHz
0
–10
–20
–30
AMPLITUDE (dBFS)
–40
–50
–60
–70
–80
–90
–100
–110
–120
0 10 20 30 40 50 60
FREQUENCY (MHz)
217514 TA01b
5
GN1406 and GN1407 - Redriver and
D isk / I nterface
PCIe Applications
Any blade server backplanes and riser cards
supporting PCIe Gen1 and Gen2 traffic EQ
Next generation of data center servers, PCIe Switch/
storage systems and intelligent networking Endpoint GN1407 Root
(one channel)
systems requiring hardware acceleration and ASIC Complex
virtualized peripherals using PCIe connectivity EQ
and form factors GN1407
Datacom, telecom and storage servers using (one channel)
copper and/or optical interconnects
Cable,
PCIe cable extenders ENDPOINT CARD
Backplane,
HOST SYSTEM
Infiniband SDR/DDR, SAS/SATA and Serial Connectors
Rapid I/O interconnects
IEEE 10G Base-CX4, LX4 and KX4 Pin compatibility between GN1406 and GN1407 enables designers to interchange parts as signal integrity
Parallel Optics (QSFP, SNAP-12, POP-4) issues become clearer in the final stages of the design phase without having to redesign the board
6
For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal
Atmel Touch Technology –
Microcontroller
Ditch the Switch
Get in touch with your senses
User interfaces are the critical factor in making electronic products appealing to consumers. Atmel’s latest innovations in Touch
Technology help you produce very desirable products that stand out from the crowd. In addition to its robustness and reliability in real-
world environments, Atmel’s patented charge-transfer touch sense technology offers exceptional design flexibility that enables design
engineers to develop lower cost products with outstanding consumer appeal.
Features Benefits
Qtouch Signal processing algorithms that eliminate false
For 1 to 10 buttons triggering due to momentary unintentional touch,
proximity or electrical disturbances.
Simple key shapes
The ability to create keys of different shapes and sizes
Easy to wire to suit the design of individual products and make them
easier to use
QMatrix
A choice of ‘touch’ or ‘proximity’ operation. Proximity
Up to 64 keys operation enables devices to magically ‘wake-up when
Water resistant a hand approaches
High temperature Inherent techniques that minimize power and energy
consumption to extend battery life between re-charges
QSlide / QWheel in portable devices
Linear touch Automatic drift compensation to account for slow
changes due to aging or fast changes due to the
Rotary touch environment. No need for user re-calibration and no
3 channels need to calibrate on the production line
Simple, elegant implementation that needs few other
Touch Library electronic components
Free software library Adjacent Key Suppression (AKS™) that eliminates
Available as library files. Source code is not available false triggering of nearby keys when touch keys are
close together
Adds touch capabilities to AVR devices
Low cost — often less than the cost of the mechanical
Uses PORTB and PORTD for up to 8 touch channels
devices that Atmel’s touch controllers replace
Any combination of buttons, wheels and sliders possible
Precompiled linkable libraries for selected AVR devices Applications
ATmega88, ATmega88PA, ATmega168P, ATmega328P, ATtiny88, Industrial Controls Handheld controls
as well as many other MCU devices Medical Thermostat
Control Panels White Goods
ANY DEVICE that has a mechanical switch
7
R8C Microcontroller Family Solutions
Microcontrollers
performance, innovative
features and superior quality.
Lx Series
The wide range of features and performance simplifies the task of finding
robust, economical solutions for 8-bit embedded-system applications.
3x Series
The MCUs in the R8C/2x and /3x¹ series cover virtually an unlimited
number of applications. The expanded feature sets of the R8C/Lx¹ series
include an LCD controller for enhanced user interface capability. Full
-performance peripheral compatibility is maintained through the family to allow system
2x Series
variations to be designed with minimum effort.
¹Check availability.
2
/3x, /Lx Series; 3 /Lx Series; 4 /2x Series
8
For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal
STM32 Connectivity Line
Microcontrollers
32-bit microcontroller with USB OTG, Ethernet
with IEEE 1588, dual CAN, audio class I²S
The STM32 Connectivity Line is the latest addition to the highly successful STM32 Family of ARM® Cortex™-M3
powered MCUs, adding support for high performance industry standard interfaces while maintaining pin-and-
software compatibility with other STM32 Product Lines.
Superior connectivity: Ethernet with IEEE 1588, USB OTG and dual CAN
The STM32 Connectivity line makes networking economical as a result of an embedded Ethernet MAC with
a dedicated DMA controller. The IEEE 1588 precision time protocol hardware support provides accurate clock
synchronization over the network and retains ample CPU bandwidth to implement an embedded application.
USB 2.0 OTG makes the STM32 Connectivity line a turnkey solution to add a USB device, host or OTG function to
a product. Firmware upgrades in the field, data logging or data storage are now as easy as connecting a standard
USB mass storage device to the STM32. Adding a USB keyboard, mouse or any other device is just as easy.
The dual CAN 2.0B makes the STM32 Connectivity Line a turnkey solution to implement a CAN gateway. Also since dual CAN and USB peripherals can be used
simultaneously, the STM32 is the perfect fit to connect a computer or USB device to CAN networks.
The combination of advanced, connectivity-oriented peripherals, standard STM32 peripherals including a PWM timer, and the high processing performance of the
32-bit ARM Cortex-M3™ CPU also allow developers to consolidate multiple functions such as motor-control, user-interface control and connectivity features in
equipment such as domestic appliances, building controls or industrial automation. Other applications will include systems requiring network accessibility, data-
logging, or USB peripheral extension, such as patient monitors, point-of-sale terminals, vending machines, and safety or security systems
Features
10/100 Ethernet MAC with embedded DMA
and IEEE 1588 hardware support
Ethernet PHY connectable using MII and RMII
interfaces
USB 2.0 On-The-Go (OTG) full speed with
embedded OTG PHY
Dual CAN 2.0B active
Dedicated buffers for USB OTG and dual CAN
peripherals
Advanced PLL block to clock both I²S
peripherals
Flexible bootloader supporting USART, CAN
and USB device firmware upgrade (DFU) class
9
LDS6100 / 6120 - PureTouch™
Capacitance Touch IC Family with
S ens or s
When configured for capacitive sensing, the touch inputs are directed through an integrated switch matrix to a 500 kHz sigma-delta CDC
which senses changes in the external sensor array. When a sufficiently large change in capacitance occurs, a touch event is registered
and the host processor is notified via an interrupt pin or DCM output. On the LDS6120 products, a variety of built-in LED lighting effects
may be automatically initiated by a touch event with no processor intervention required.
On-chip calibration logic continuously monitors the environment and automatically adjusts touch sensitivity to insure robust performance.
Proprietary noise-filtering algorithms may also be activated to prevent false sensor activation in noisy system environments. The
LDS6100/6120 family is offered with SPI-compatible, I2C-compatible and SMBus-compatible interfaces, selectable in real-time using
the I/F select pins. General-purpose input/output (GPIO) and interrupt outputs are also provided for additional communication with the
host processor.
Features
Ease-of-use and flexible configurability with
optimized, state machine architecture
Longer battery life enabled with ultra-low power
consumption
Low BOM cost and minimized solution footprint LDS6120 C0/DCM10
C1/DCM11
using bare minimum of external components
Robust touch performance via proprietary noise- Switch
Matrix
Power-On Calibration Sigma-Delta
C9/DCM9
Reset Logic Engine CDC
filtering algorithms C10/LED0
Applications RESETB
TEST
LDOEN LDO
Gaming devices
VDDIO
Excitation
Remote controls I/F_SEL0
Serial Interface and
Control Logic
Interrupt and GPIO Logic Source
SHIELD
I/F_SEL1
Television, audio/video
SD0/ SDI/ SCLK/ CSB/ GPIO INTB
Set-top boxes, multi-function printers, enterprise SDA A1 SCL A0
telephony
White goods Figure 1. LDS6120 block diagram
10
Integrated LED drivers (LDS6120)
LDS6100/6120 Features
The LDS6120 products integrate a feature rich, highly configurable LED driver,
Versatile, accurate CDC enabling the implementation of visual feedback for touch-based controls
Up to 20 capacitance sensor inputs and fun lighting effects using a single controller. The minimum and maximum
Configurable hysteresis and debounce current, transition times and desired effect are programmable on an individual
LED basis, allowing for customized LED behavior for individual buttons. LEDs
Ultra-low touch sensor power consumption* may be either synchronized to automatically trigger when a touch event occurs
Full power operating mode (typical): or manually controlled using the host processor.
<125 μW (VDD1=1.8V)
Shutdown mode (typical): Ideal solution for portable and “green” applications
<1 μW (VDD1=1.8V) The LDS6100/6120 is optimized for ultra-low power consumption. In full power
mode, sensor conversion and calibration occur continuously, minimizing the
Integrated, automatic calibration algorithms time between touch event and touch detection. With its ultra-low touch sensor
Auto environmental compensation current consumption of <70 μA (typical @1.8V), the LDS6100 products may be
Integrated noise immunity algorithms for high- operated continuously in full power mode, eliminating the need for introduced
EMI applications latencies that can cause noticeable delays and degrade the user experience.
Where power consumption is of the utmost importance, low power modes
Integrated touch preference modes with configurable latencies may be utilized to further reduce power below 25
Strongest single touch / two touches μA.
Unrestricted (all) touches
The LDS6100/6120 family is optimized for a minimized solution footprint, with
Built-in slider/scroll support the functionality of multiple components consolidated into a single device
Location, scroll direction, and 2x interpolation and a bare minimum of required external passive components. A variety of
supported natively package options are available including a 4mm x 4mm 28 lead TQFN package,
a 5mm x 5mm 40 lead TQFN package (both with 0.75mm package thickness),
Integrated LED drivers (LDS6120) or a 5.3mm x 10.2mm SSOP package for applications requiring a wider lead
Up to 10 dual-purpose sensor inputs pitch.
configurable as LED drivers
7.75 mA maximum current per driver VDDIO (1.65V~5.5V)
Dimming/blink/heartbeat effects
Individual LED configurability
Host-free synch with touch events LDS6120 Host Processor
with I2C
SHIELD VDDIO VDD
RPU
Flexible interface options RPU
I/F SEL0/1 VSS
SENSOR PCB
SPI, I2C, & SMBus serial I/F options A0/A1
DCM outputs for mechanical switch emulation C10/LED0 SCL SCL
Separate VDDIO level for serial interface C11/LED1 SDA SDA
C12/LED2
GPIO and Interrupt Outputs C13/LED3 C0/DCM10 GPIO
C14/LED4 C1/DCM11 GPIO
C2/DCM12 GPIO
Flexible package options C3/DCM13
C4/DCM14
GPIO
GPIO
C15/LED5
28 pin 4mm x 4mm QFN C5/DCM15
C6/DCM16
floating
floating
C16/LED6
40 pin 5mm x 5mm QFN C17/LED7
C7/DCM17
C8/DCM18
floating
floating
VDDIO = 1.65V–5.5V C2 C1
VSS1
VSS2
* Excludes LED driver current and I/F and voltage C1=C2: > 1µF
dependent VDDIO current *For direct application of 1.8V voltage. For voltages higher than 1.8V, apply voltage to VDDIO
and tie VDD 1 to ground through C2.
11
For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal
Virtex-6 FPGA ML605 Evaluation Kit
Development Tools
The Virtex®-6 FPGA ML605 Evaluation Kit provides a development environment for system designs that demand high-performance, serial
connectivity and advanced memory interfacing. The ML605 is supported by pre-verified reference designs and an industry-standard FPGA
Mezzanine Connector (FMC) which allows scaling and customization with daughter cards. Integrated tools help streamline the creation of elegant
solutions to complex design requirements.
Ordering information
Part number— EK-V6-ML605-G
Price -- $1,995
12
Nu Horizons offers a wide range of development/evaluation boards, tools and kts. For more information, please visit www.nuhorizons.com/development
Spartan-6 FPGA SP605 Evaluation Kit
Development Tools
The Spartan®-6 FPGA SP605 Evaluation Kit delivers all the basic components of the Xilinx Base Targeted Design Platform in
one package. It provides a flexible environment for system design and provides customers reference design and examples
on how to leverage features such as high-speed serial transceivers, PCI Express®, DVI, and/or DDR3. It includes an industry-
standard FMC (FPGA Mezzanine Card) connector for future scaling and customization to specific applications and markets.
Ordering information
Part number— EK-S6-SP605-G
Price -- $495
13
Nu Horizons offers a wide range of development/evaluation boards, tools and kts. For more information, please visit www.nuhorizons.com/development
Nu Horizons Line Card
• Power (MOSFET, IGBT, Diodes, Thyristors, DC/DC,
• Military Discretes (Switching Diodes - JAN, JANTX, JANTXV) PWM Control, LED/Lamp/Display Drivers)
• Device Server Modules • RF Power (FETs, Drivers, Amplifiers, Microwave
• Embedded MCU / MPU (ARM7TDMI, ARM9926EJ) modules, RF Modules)
• Networking Modules (Wired/Wireless 802.3 / • Solar Devices (Solar Cells, Solar Bits, Solar Die,
802.11bg / 802.15.4 Solar Battery Chargers)
• Audio (DAC’s, ADC’s, Codec’s, SPDIF, Sample Rate
Conv., DSP, USB)
• Memory (EEPROM, DAC + EEPROM)
• Networking (T1/E1/T3/E3 xcvr, PCM)
• Sensors (Hall Effect Sensor, 3d Compass)
• Video (NTSC/PAL Encoder/Decoder, A/V Switches, (Formerly Astec / Artesyn) • Data Converters (Delta Sigma, SAR, Voltage DAC,
Video Gain Amp) Current DAC)
• AC-DC Switchers • Frequency Control (Silicon Timing)
- Low Power (LP, NT, DA, DP, SSL) 25W-350W • Interface (RS-232, 422/485, CAN PHY)
- Medium Power (MP) Up to 1200W • Power Management (Switching Regulators, Linear
- High Power (VS) Up to 2500W Regulators, DC/DC µModules, LED Drivers, Hot
- Intelligent High Power (iVS) Up to 4860W Swap, PoE)
• Discrete (Transistors, FET arrays, Thyristors, Triacs) • DC-DC Modules (1/16 Brick, 1/8 Brick, ¼ Brick, ½ • Signal Conditioning (Amplifiers, Comparators,
• Display (Vacuum – Fluorescent Display Drivers) Brick, RF Power Brick) Filters, Voltage References, Thermal Couple
• LED Drivers (Constant Current Drivers) Compensators)
• Motor Control (Brushless DC, Bi-Polar Stepper) • Industry Standard - Non Isolated Point-of-Load
(C-Class, E-Class, F-Class) • Wireless / RF (I/Q Modulators – Demodulators,
• Power (Linear Regulators, Buck/Boost/Fly back DC- Up & Down Converting Mixers, IF Amplifiers, PA, RF
DC, Charge Pumps) • Power Systems Engineering Services
• Sensors (Hall Effect) Log Detectors, RF Power Detector)
• Analog (Data Conversion, Power Management) • Data Converters (ADC, DAC)
• Interface (PLB/PCI/I2C/SPI USB/UART’s, • Data Communications (10/100/1G/10G Ethernet
• Communications (Bluetooth, LIN, CAN, POTS, Switches, 10/100/1000/10G PHYs)
GPS, RF, WiMax, Zigbee) RS232/485/422 Transceivers)
• Memory (Flash, EEPROM, Modules) • Power (Buck/Boost Regulator’s, Charge Pumps, • Embedded MCU / MPU (ARM V5TE, PXA
• Microcontrollers (8051, AVR, ARM7TDMI, LDO’s, Supervisors, PWM, Programmable Power) StrongARM, PPC & MIPS Systems Controller)
ARM926EJ) • Storage (Data Reduction, Data Security) • Power Management (POLA)
• Multimedia & Imaging (CCD/CMOS Arrays, IR, • Telecom (T1/E1/DS1/DS3/E3 LIU’s, Carrier ETH • Storage (FAS/SATA/PATA, SAS/Fiberchannel,
Video) SONET/SDH Framers, Mappers & Aggregators) Storage Processors)
• Network Storage (Data Storage, Switched • Video (Format Converter)
Ethernet) • Wireless / RF (802.11 Modules)
• Programmable Logic (FPGA, SPLD/CPLD) (Fiber Optics Division)
• Sensors (Biometrics, RF, Smart Cards)
• Optical Components (WDM Management, 850nm
VCSELs & Detectors, 1310nm Lasers & Detectors,
CML Transmitters,WSS) • Analog ( Drivers / Voltage & uC Supervisors /
• Optical Transceivers (GBIC, XFP, MSA300, SFP, Filters / Switches / Regulators)
• Fiber Optic Devices (10G FP TOSA & MM PIN SFP+) • Bus Device ICs ( USB / PC / PCMCIA / SMBus)
ROSA, OTDR FP Lasers, 2.5G DWDM DML, DFB • Passive Optics (WDM networks) • Ethernet ( 10/100 PHYs, Controllers, Switches)
TOSA & APD ROSA) • Linear ICs ( Active Filters / Comparators /
• Optocouplers (Transistor Output, High Speed, Solid Op Amps / References / Timers)
State Relays) • Power Management ICs ( Battery, Display, Hot-
• RF Modules (Zigbee) Swap, PCI/PCIX/PCIE, High Side, LDOs, DDR)
• RF Semiconductors (RFIC Switch, GaAs FET, • Precision Edge ICs ( Clock distribution, generation,
GaAs PA, Si LD-MOSFET, CATV Hybrid, Si RFIC) synthesizers / Multiplexers, PLLs, buffers, CDRs)
• Audio (CODECs) • RF (290 – 980 ISM band / ASK/FSK / 200kbps max
• Datacom (CDRs, Laser Drivers, TIAs, Limiting Amps, data rate)
ROSA, PCIe Retimers/Redrivers/Bridges, Optical • System Management ICs ( Fan Control / Thermal
Modules (SFP), Backplane SerDes) Supervisor I2C)
• Video (Equalizers, Cable Drivers, Reclockers,
• Embedded Array ( 0.13µ - 0.5µ / 6K – 10.7M SerDes, Video Optical Modules, GenLocks, Clock
Gates / 50 – 300 MHz) Cleaners, HDMI/DisplayPort transmitters & receivers)
• IP Repository ( ARM926EJ, 8051, USB, PCIE,
DDR2, 10/100 MAC, Mil-STD-1553, UART, DMA, • DRAM (DDR3 SDRAM, DDR2 SDRAM, DDR
Timer, GPIO) SDRAM, SDRAM, RLDRAM, PSRAM)
• Standard Cell ( 0.13µ - 0.25µ / 5M – 12M Gates / • DRAM Modules (FBDIMM, RDIMM, SODIMM,
150 – 333 MHz) UDIMM)
• Structured ASIC ( 0.13µ - 0.35µ / 21K – 1.7M • Mobil DRAM (Mobil SDRAM, Mobil DDR SDRAM)
Gates / 50 – 250 MHz) • Memory (QDR/DDR SRAM, Zero-Wait SRAM • Multichip Packages (MobilDRAM & NAND Flash
(NBT), Sync Burst SRAM, Specialty Sync-SRAM) Combinations)
• NAND Flash Memory (Managed NAND, High
Speed NAND, Solid State Storage, Embedded USB)
• Power and Battery Management (IGBT and ® (Including ICS)
MOSFET gate drivers)
• Sensor and Imaging Arrays (Hall Effect Sensors) • Audio (2,4,8, & 10 Channel Codecs)
• Clock Distribution (Synthesizers, Translators, (Formerly C&D Technologies)
• Signal Conditioning (Solid State Relays,
Optocouplers) Oscillators, PLLs, Spread Spectrum, Video)
• Telecom (Embedded Modem, MF Trunk signaling, • Clock Generation (Fan-Out, Multiplexers, PLLs, • AC/DC Power Supplies (200 – 2000 Watts,
DTMF) Translators, Programmable) 2.5VDC to 48 VDC Out – PCI Modules)
• Datacom (10/100BaseT Phys) • Data Acquisition (Electronic Imaging, A/D
• Interface (PCIE Switches, Rapid I/O) Converters, D/A Converters, Sample/Hold Amplifier,
• Logic (FST, ALVC, LVC, FCT & BusSwitch) Multiplexers)
• Memory (FIFO, SRAM, Multiport RAM) • DC/DC Converters (0.25 to 340 Watts, 0.02 to 80
• Telecom (Network Search Engines, T1/E1/J1 LIUs, Amps, 1.2 to 48 VDC Out; 3 to 75 VDC In)
• Imaging Solutions (Fax Modems, Fax and MFP Framers, ATMs, AFEs, TSIs) • Digital Panel Meters (Voltmeters, Wire Meters,
System Solutions, Digital Photo Frames)
• Audio (Speakers-on-a-Chip, PC HD-Audio, PC HD- • Video (LVDS TX/RX, HDMI Multiplexer/Switches) Process Monitors, AC/DC Ammeters)
Audio Modem Combo)
• Magnetics (Inductors & Transformers, Differential
• Video (MPEG Encoders/Codecs, Video Decoders, common-mode filters, Databus Isolators)
Demodulators, Surveillance / Security)
• Dial-Up Access Modems (PC Dial-Up Modems,
Embedded Dial-Up Modems)
• Memory (DDR DRAM,SDRAM, EDO & FPO DRAM,
E2PROM, PSRAM, SRAM, DDR II Synchronous
SRAM, Asynchronous SRAM) • AC-DC Power Supplies (125W-375W, 3.3vdo to
• Smart Card (Two-Wire Serial EEPROM, Secure, 56vdo, 90-264vao in, 3”, 3.3” x 5” format)
• Wireless (Bluetooth modules, ZigBee modules, MCU Based, ICs) • DC-DC Open Frame Power Supplies (125W,
802.11 modules) 160W, 3.3-48vdo 3” X 5” format)
14 • Power Systems Engineering Services
• Frequency Control (Oscillators, Optical Timing • AC/DC Power Supplies (Industrial and Medical -
Clocks, Sine Wave Oscillator)
300W - 1500W)
• DC/DC Converters
(Rohm Semiconductor is the official sales channel for Oki
• RF Components (SAW Resonators, SAW RF & IF - Industry Standard (1/8-Brick, 1/4-Brick, 1/2-
Filters, RFIC Transceivers) Brick, Full Brick)
Semiconductor products) • RF Modules (ZigBee, 802.15.4, UHF Mesh, FHSS
- Non-Isolated Point of Load
ISM, Bluetooth, 802.11b) - Intermediate Bus Converters (1/8-Brick, 1/4-
• Audio (CODECs, DACs, Amplifiers ) • Standalone RF modules (FHSS, 802.15.4,
• Display Drivers (LCD / VFD Driver / Controllers) Brick, 1/2-Brick)
802.11b, and Bluetooth)
• Embedded MCU / MPU (4-Bit NX 63K /
ARM7TDMI / ARM946E / Biometrics)
• Memory (P2ROM, DRAM )
• Speech (BGM Mixer - ADPCM & ADPCM2, Voice • Audio / Video (3 Input A/V Switch, Dual SCART
Synthesizers & Recorders, Audio Codec) A/V Switch)
• Telecom (ADPCM – Linear – PCMA-Law - VoIP • Modems (V22bis, Data Pumps, AFEs, DAAs)
Codec’s, Echo Cancellers, Transceivers) • Power Measurement Metering Control (Single/
• Video (NTSC / PAL / SECAM Encoders – • Flat Panel Displays (LCD – 2” to 65”) Poly Phase Meter ICs)
Decoders, NR-FIFO) • Memory (Flash – NOR) • Smart Card Reader (SoC - Smart Card Reader &
• Optoelectronics (LEDs, LED Modules, Laser Diode, Power Management, Interface ICs)
Photocoupler, IrDA, photo interrupters, Emitters/ • WAN / LAN (10/100 PHY, 10Base2/5 - OC-3 /
Detectors, Sensors) STM-1 / STS-3 / E4 & DS3 / E3 / STS-1
• Power (LDO / Switching Regulators, LED Drivers, Transceivers)
• Analog Image Sensor (NTSC/PAL) Solid State Relays)
• Digital Image Sensor (CIF, VGA, 1.3M / 2.0M /
3.2M / 5.17M Pixel)
• Image Processors
• Data Interconnect (Signal Conditioners and
Retimers, Crosspoint Switches, Backplane, Switch
Fabrics)
• Ethernet (10/100/1G/10G PHYs, 10/100/1G/10G
MACs, Switches, Transceivers)
• Digital Video Processors • Storage (FC, SerDes, Transceivers, SAS
• Amplifiers & Comparators (Audio, Op Amp, Gain • Storage Products (Serial ATA - Parallel ATA,
Control, Level Detect/Sense, Video) Controllers, SATA Controls)
• Analog Switches (Audio, Data, Video) Parallel ATA Controller, RAID Storage Processors, • Transport Physical Layer (TIAs, Amplifiers,
SATA Controllers, SATA Port Multipliers) Photodiodes, CDR, MUX, DEMUX, Transceivers,
• Circuit Protection (EMI / RFI Filters) • Video Transport (HDMI, DVI and iTMDS Products - PON)
• Clock Management (Synthesizers, ZDB, PLL, Receivers, Transmitters, Switches, PHYs) • Transport Processing (VC, FEC, Network
Skew Control, Fan-Out, Buffers, Timers) Processors, TSI, Pointer Processors)
• Discretes (FETs, Transistors, Diodes, Rectifiers,
Thyristors)
• Interface (232 / 422 / CAN Tranciever, Modulator /
Demodulators., Smart / SIM)
• Logic (Gates, Inverters, MUX, Latches) • Controllers (Flash Memory Card Controller, USB • Memory (SDRAM / DDR1, Pseudo SRAM, Serial
• Power Management (PFC, Battery Management, Flash Controller) Flash, Parallel Flash)
Supervisors, References, DC/DC Switchers, Off-Line • Embedded Graphics (128-bit 2D/3D mobile
Reg/Ctrl, LDO) graphics engine, Mobile Graphics Coprocessor)
• Mobile Communication (Mobile Satellite TV Tuner
IC)
• Multimedia SoC (MP3/WMA Digital Audio Player,
USB 2.0 Megapixal Image Controller)
• High-Power Laser Diodes (Single, Laser Bar / • Filters
Stacks) • Inductors
• Infrared (Photo detectors, Emitters, Sensors) • Isolators
• Intelligent Displays (Self-Contained LED Displays) • Transformers (Modem, Analog/Voice Switching,
• LED’s (Side / Radial / Top Emitters, Arrays, High DSL, Cable Modem, RJ45, PoE)
Power) • Advanced I/O Controllers (USB-ATA, Southbridge)
• Datacom Satellite Receiver (10/100 MAC/PHY
Controller, 10/100PHY, Multimedia Processors,
ArcNET, CircNET)
(Including SaRonix) • Environmental (Temperature Sensors, Fan Control)
• USB Solutions (Card Reader, Flash Drive, Disk • Advanced / General Purpose FPGAs
Drive, Hub, PHY) • CPLD (32 – 512 Macrocells, Low Power/High
• Analog Switches (3-17V SPDT-SPST-DPST-MUX, Performance)
Custom HDMI/DVI-PCI-USB-LAN) • Development Platforms
• Bridges (PCI, PCIX, PCI Express – 32/64Bit – • Development Tools (DSP, Embedded Processing,
66/133MHz) Synthesis & Implementation)
• Clock ICs ( VCXOs, Buffers, Drivers, Generators, • Intellectual Property (including PCIe, PCI,
Skew Controllers) • Power Management (AC/DC, Battery 10/100/1G/10G Ethernet, MPEG4, FEC, PPC,
• Crystals & Oscillators (Quartz Crystal Resonators) Management, DC/DC, LDO, MPU - Supervisor, PoE, µBlaze, PicoBlaze)
• Digital Switches (2-Port, Bus, Crossbar, DDR, VDC References, AC Switches) • Services (Design Services, Training, XPA)
Mux/DeMux, Low Voltage Translator) • Discretes (Thyristors, Diodes, FETs, Transistors)
• Interface (Re-Drivers, Buffers, Flip-Flops, Gates, • Signal Conditioning (Comparators, Op-Amps,
Latches, Registers, Transceivers, Voltage Translators) Clamp Diode Arrays, Crowbar Diodes, EMI Filtering)
• Logic (ALVC, FCT, LCX, LPT) • Logic (3.3V, 5V, Translators, Gates, Switches, Port -
Expansion)
• PCI Express Solutions (Packet/Signal Switches, • Sensors (Accelerometers, Proximity, Thermal, Touch)
Bridge, PHY, Signal Conditioning, Clock-Buffers/ • Interface (Smartcard)
Generators/Crystals) • Wireless (Bluetooth, ZigBee, GPS, RFID)
• Translators (Voltage, I/O Signal)
15
Enhance Your Design...
With Nu Horizons Education and Development Solutions
Portal is a monthly publication containing new products, technologies and development tools
available from Nu Horizons leading suppliers. Portal is availabe both in print and on the web.
Sign up online to receive your copy, be notified of upcoming issues or to request samples of
the products found inside.
www.nuhorizons.com/portal
LabCam delivers online training opportunities in a way that recognizes the value of engineers’
time. As easily as You Tube® videos, engineers can quickly load and watch videos from industry
leaders consisting of insights on products, evaluation kit overviews, end-user applications and
more. Each tutorial is up to ten minutes in length and features technology experts, CEOs and/
or peers introducing new solutions or explaining integral aspects of an important product,
solution or application. This free value-added program is packaged for short, informative and
high quality distance learning.
www.nuhorizons.com/labcam
Nu Horizons is proud to present our education and training program, which offers engineers
the opportunity to participate in technical seminars conducted by experts focused on the
latest technologies from our leading suppliers. This program provides higher velocity
learning to help minimize start-up time to quickly begin your design process utilizing the latest
development tools, software and products. Check online for the latest seminar schedule.
www.nuhorizons.com/xpresstrack
Online Learning Nu Horizons Online Learning Center is designed to provide a complete training experience
for engineers — without having to leave the office. New supplier trainings are posted twice
Center a month and range from new product overviews to in-depth technical training and potential
design implementations. These live trainings are recorded and archived for your viewing
convenience.
www.nuhorizons.com/olc
In order to simplify the design process, Nu Horizons has created a series of application notes
Application designed to guide engineers through the process of interfacing different devices together.
Using a detailed step-by-step approach, these design guides identify key elements in the design
process. Topics in the application notes are organized by design task and each topic is a
Notes stand-alone section, with a short introduction or overview, followed by the step-by-step design
guidelines. All steps include a sufficient level of detail to provide the designer with relevant
information to proceed quickly and easily from start to finish.
www.nuhorizons.com/appnotes
Development Nu Horizons offers a wide range of development / evaluation boards, tools and kits featuring
the latest technology from the most trusted suppliers in the industry. Visit the development
Tools tool section of our website for a variety of solutions all aimed at providing a low-cost solution
for designers to accelerate a product’s time-to-market.
www.nuhorizons.com/devtools