This document contains practice problems from the textbook "Statics and Mechanics of Materials" related to chapter 2 on force vectors. There are multiple subtopics covered, including vector addition of forces, addition of coplanar force systems, position vectors, and forces directed along a line. The problems involve calculating magnitudes and directions of resultant forces given information about the individual forces that make up the system.
This document contains practice problems from the textbook "Statics and Mechanics of Materials" related to chapter 2 on force vectors. There are multiple subtopics covered, including vector addition of forces, addition of coplanar force systems, position vectors, and forces directed along a line. The problems involve calculating magnitudes and directions of resultant forces given information about the individual forces that make up the system.
This document contains practice problems from the textbook "Statics and Mechanics of Materials" related to chapter 2 on force vectors. There are multiple subtopics covered, including vector addition of forces, addition of coplanar force systems, position vectors, and forces directed along a line. The problems involve calculating magnitudes and directions of resultant forces given information about the individual forces that make up the system.
CHAPTER 2: FORCE VECTORS TUTORIAL 1 SEM. 1 - SESI 2014/2015
These selected questions are available in the text book Statics and Mechanics of Materials, RC Hibbeler. 21. If = 30 and T = 6 kN, determine the magnitude of the resultant force acting on the eyebolt and its direction measured clockwise from the positie x a!is" (Subtopic: Vector Addition of Forces) 22. If = 60 and T = # kN, determine the magnitude of the resultant force acting on the eyebolt and its direction measured clockwise from the positie x a!is" (Subtopic: Vector Addition of Forces) $s shown in the %gure, two forces F1 = 150 N and F2 = 200 N are acting on a pin" &alculate' () *he magnitude of the resultant force acting on the pin, +) *he direction of resultant force measured counter clockwise from the positie x a!is" 3) *he direction of resultant force measured clockwise from the positie x a!is" (Subtopic: Addition of a System of Coplanar Forces) 2-26. ,etermine the magnitude of the resultant force acting on the pin and its direction measured clockwise from the positie x a!is" (Subtopic: Addition of a System of Coplanar Forces) FAKULTI TEKNOLOGI KEJURUTERAAN UNIVERSITI TEKNIKAL MALASIA MELAKA !UT"M# 2-27. If F1 = 600 N and - = 30, determine the magnitude of the resultant force acting on the eyebolt and its direction measured clockwise from the positie x a!is" (Subtopic: Addition of a System of Coplanar Forces) 2-30. If - = 30 and F2 = 3 kN, determine the magnitude of the resultant force acting on the plate and its direction measured clockwise from the positie x a!is" (Subtopic: Addition of a System of Coplanar Forces) 2-62. ,etermine the position ector r directed from point A to point B and the length of cord AB" *ake z = . m" (Subtopic: Position Vectors) 2-63. If the cord AB is/"# m long, determine the coordinate position 0z of point B" (Subtopic: Position Vectors) 2-65. ,etermine the magnitude and coordinate direction angles of the resultant force acting at $" (Subtopic: Force Vector irected alon! a "ine)