Professional Documents
Culture Documents
j
1. A crane brack
ket is fasteneed to the roo
of truss by m
means of two identical boolts as shownn in
fiigure 1. Deteermine the siize of the bo
olts, if the tennsile stress inn the bolts m
must not exceed
75MPa.
2. How
H much ecccentric load
d P can be ap
pplied to the bracket, if tthe maximum
m shear stresss of
th
he bolt must not exceed 120MPa. Diiameter of thhe bolts = 144mm. Assum
me that entiree load
an
nd moment is
i equally sh
hared by the bolts.
4. A welded join
nt as shown in figure is subjected
s
to an eccentricc force of 7.55kN. Determ
mine
th
he size of thee welds if the permissiblle shear stresss for the weeld does not exceed 100M
MPa.