Professional Documents
Culture Documents
Date 16/07/0
Slag
Inclusion
L= 10,W=4
Cap Undercut
25 Intermittent
L= 15 ,D= 1.0 max
Cap Undercut
Intermittent
15 L= 30,D= 1.6
50
Cluster
Porosity
L=5 w = 3
100
Lack of
sidewall fusion
160
L= 10
Cap Undercut
Intermittent
L= 15 ,D= 1.0 max
10
15
Note: All dimension in mm
Spatter and surface slag requires removal, arc strikes require grind smooth and check with MT
Poor cap profile full weld length
Linear misalignment full weld length D = 1.0 max
Final Report
After you have completed your thumb print report sketch of
your test plate the next step is to complete your final report
again the report must be completed in ink (no pencil).
Reinforcement (Height)
Reinforcement (App)
Incomplete filling
Inadequate weld width
Slag inclusions
Undercut
Surface porosity
Cracks
Lack of fusion
Arc strikes
Mechanical damage
Laps/Laminations
Misalignment
Pipe/plate
Accumulative
Maximum
section no
Total
Table
A-C
L= 10 , D = 3.0
2.0
Accept/Reject
Rejected