Professional Documents
Culture Documents
V1 R3 Upgrade Guide A
V1 R3 Upgrade Guide A
upgrade Guide
UPGRADE PROCESS
1-Send an Email to NOC before 24
hours.
2- Call TX NOC to double Check the
old CSH Version and management
status.
1-Access site process.
Secure
backup
Preparati
on steps
before
action
Site
Access
UPGRADE STEPS
OPEN DC_STANDALONE PROGRAM FOR
STARTING THE UPGRADE
FTP SETTING
BACKUP
BEFOR
E
AFTER
New Task
Upgrade steps
Query then
next
Upgrade steps
Upgrade steps
Upgrade steps
Upgrade steps
Upgrade steps
Upgrade steps
Select the target pakage from the
specified folder
Upgrade steps
Select the target pakage
Select
fromthe
thepath from
specified folder
here
Upgrade steps
Upgrade steps
Upgrade steps
SELECT THE NE.PKG FILE AND
THEN PRESS OK
Upgrade steps
AFTER THE NEW VERSION
APPEARED PRESS OK
Upgrade steps
Upgrade steps
PRESS OK AND
CONTINUE
Upgrade steps
FROM THE DRAG MENU SELECT YOUR
TARGET VERSION
Upgrade steps
CONFIRM THE VERSION BY
PRESSING YES
Upgrade steps
Upgrade steps
BE SURE YOU CHECK IN THE PAUSE LIST
BEFORE ACTIVATE AND COMMIT AND THEN
PRESS NEXT
Upgrade steps
Upgrade steps
PRESS START TASK TO START THE
UPGRADE STEPS
Upgrade steps
PRESS YES TO CONFIRM STARTING
THE UPGRADE
Upgrade steps
Upgrade steps
Upgrade steps
Upgrade steps
Upgrade steps
Upgrade steps
Upgrade steps
PRESS
OK
Upgrade steps
Upgrade steps
Upgrade steps
Upgrade steps
CONFIRM THE CONTINUE OPERATION BY
PRESSING YES
Upgrade steps
PRESS
OK
Upgrade steps
Upgrade steps
THE OPERATION SUCCEED AND YOU CAN GET
REPORT BY PRESSING GENERATE REPORT
Upgrade steps
Choose the correct path and
then press OK
Upgrade steps
Upgrade steps
Continue by choose
Login NE
Upgrade steps
Continue by choose
Query Board
Upgrade steps
Choose 7-CSH and press
>>
Upgrade steps
Upgrade steps
Press the upgrade version
folder select
Upgrade steps
Set the board software and load
type to license and then select
software
Upgrade steps
Select the file
*.ini file
Upgrade steps
Confirm the file sected by
pressing OK
Upgrade steps
Press yes to
continue
Upgrade steps
Press start to start downloading
the license
Upgrade steps
Upgrade steps
The license downloaded
successfuly
Upgrade steps
The way to create the license
file*.ini:
Firstly open the following path:
V100R003C03SPC200(5.76.03.45)SoftWare_lcs\OptiX RTN 950
V100R003C03SPC200(5.76.03.45)SoftWare_lcs\NELCS+++
Upgrade steps
After choosing the specification needed press create
to create the ini file
Upgrade steps
Select the path to save the ini file and
then press save
Upgrade steps
After the upgrade the RTN may report some or all
the following alarms
CP_TEL_EXHAUST(major alarm): ignore this alarm
User_password needed to be cahanged: close the
dc_standalone
Port_mode_mismatch(EM6F): check the mode of the
node B and change it to 100M full-duplex
CLK_NO_TRACE_MODE:from NE EXPLOREselect
configurationCLOCKClock Subnet Configuration
add one source for your clock and then press apply
the alarm will clear.
Thank You