Professional Documents
Culture Documents
NEC Pasolink 1 General Description
NEC Pasolink 1 General Description
GENERAL DESCRIPTION
CHAPTER 01
GENERAL DESCRIPTION
1.
INTRODUCTION
NEC's Pasolink+ XPIC can operates in frequency bands from (6 38) GHZ.
GENERAL DESCRIPTION
PASOLINK FAMILY
SERIES/MODEL
SYSTEM
MODULATION
INTERFACE
PASOLINK V3
PDH
4PSK
2x2MB
4x2MB
8x2MB
16x2MB
1x8MB
1x34MB
PASOLINK V4
PDH
4PSK
2x2MB
4x2MB
8x2MB
16x2MB
2x10/100Base-T
PASOLINK MX
PDH
4PSK/16QAM
Selectable
5,10,20,40x2MB
2x10/100Base-T
PDH
16QAM + RS
8x2MB
4/6GHz
7/8GHz
11GHz
13GHz
15GHz
18GHz
23GHz
26GHz
38GHz
3.6-7.1
7.1-8.5
10.7-11.7
12.7-13.2
14.2-15.3
17.7-19.7
21.2-23.6
24.2-27
37-40
PASOLINK+
16x2MB
SDH
(STM-0)
32QAM+RS
21x2MB
(STM-1)
SDH
(STM-1)
32 QAM +RS
STM-1
SDH
(STM-1)
128QAM+RS
STM-1
SDH
(2xSTM-1)
128QAM+RS
STM-1
(XPIC)
2x10/100Base-T
GENERAL DESCRIPTION
2.
EQUIPEMENT FEATURES
1.
2.
High reliability
3.
MITIGATION OF INTERFERENCE
4.
(1/8)
GENERAL DESCRIPTION
2.
EQUIPEMENT FEATURES
5.
(2/8)
6.
(1 + 0 ) unprotected or ( 1+ 1) protected.
Hot Standby/ Space Diversity / Twin Path systems are available with Hitless switch.
7.
GENERAL DESCRIPTION
2.
EQUIPEMENT FEATURES
8.
(3/8)
TX POWER CONTROL
9.
Automatic Transmit Power Control (ATPC) or Manual Transmit Power Control (MTPC)
Full front panel access for all cabling and user interfaces
GENERAL DESCRIPTION
2.
EQUIPEMENT FEATURES
(4/8)
Service channels : -
10 Base-T
GENERAL DESCRIPTION
2.
EQUIPEMENT FEATURES
(5/8)
NEC Quality control is carefully monitored in every manufacturing step, such as parts
selection, assembly, adjustment and testing.
NEC Quality Controls employing Zero Defect and Value Engineering Techniques extend to
every aspect of production and inspection in accordance with stringent Total Quality Control
programs.
GENERAL DESCRIPTION
2.
EQUIPEMENT FEATURES
(6/8)
Event Logging
GENERAL DESCRIPTION
2.
EQUIPEMENT FEATURES
(7/8)
2.
1.
2.
GENERAL DESCRIPTION
10
2.
EQUIPEMENT FEATURES
(8/8)
3.
GENERAL DESCRIPTION
11
3.
Compatibility
GENERAL DESCRIPTION
12
4.
System Compositions
The system consists of the following :1. MDP-150MB7T-( )A Modulator-Demodulator (Indoor Unit (IDU)).
2. TRP-( )G-1AA Transmitter-Receiver (Outdoor Unit (ODU)).
3. Orthogonal Mode Transducer (OMT) (for antenna direct mounting).
4. Hybrid for 1+1 one antenna configurations.
5. Antenna for required MW band.
6. IF Cable.
7. RF Cables for ODU Remote mounting.
GENERAL DESCRIPTION
13
5.
GENERAL DESCRIPTION
14
6.
GENERAL DESCRIPTION
15
7.
GENERAL DESCRIPTION
(1/3)
16
7.
GENERAL DESCRIPTION
(2/3)
17
7.
GENERAL DESCRIPTION
(3/3)
18
8.
GENERAL DESCRIPTION
19
9.
GENERAL DESCRIPTION
20
10.
GENERAL DESCRIPTION
21
10.
GENERAL DESCRIPTION
22
11.
GENERAL DESCRIPTION
23
12.
1.
2.
3.
(1/3)
4.
5.
6.
OMT Transducer
Features
1.
2.
Easy Installation
3.
GENERAL DESCRIPTION
24
12.
(2/3)
GENERAL DESCRIPTION
25
12.
(3/3)
OMT Specifications
GENERAL DESCRIPTION
26
13.
(1/4)
13 38 GHz Hybrid
NEC has developed the Hybrid Combiner/Divider over the full range of microwave frequencies for the
PASOLINK Series digital microwave radio point-to-point fixed wireless systems.
This Hybrid Combiner/Divider comprises a directional coupler, antenna interface, radio mounting interfaces and
polarizer.
The RF signal power received by the single polarized antenna is equally distributed and sent to two outdoor units
through the Hybrid Combiner/Divider for 1+1 protected systems.
There are two types of NEC Hybrid Combiner/Divider, one is a coaxial cable connection type for 6/7/8GHz
Bands and the other is WG connection type for 13-38GHz Bands.
NEC Hybrid Combiner/Divider is suited for Andrew, RFS, or PAL Antenna, and all NEC ODUs.
GENERAL DESCRIPTION
27
13.
(2/4)
GENERAL DESCRIPTION
28
13.
(3/4)
GENERAL DESCRIPTION
29
13.
(4/4)
GENERAL DESCRIPTION
30
14.
Note 1:
18-38GHz antennas are provided with
standard waveguide flange (PBR) and
PASOLINK original interface.
(13-15GHz antennas are provided with
PASOLINK original interface and
without standard waveguide flange.)
Note 2:
In case of 7,8,13 and 15GHz remote
mount configuration, please dont use
this table.
(Please refer to the standard catalog of
the antenna supplier).
Note 3:
This table shows typical values for
reference.
Note 4:
In case of Dual Pole Direct Mount
Antenna System, * marked Diameters
are available.
GENERAL DESCRIPTION
31
15.
GENERAL DESCRIPTION
(1/2)
32
15.
GENERAL DESCRIPTION
(2/2)
33