Professional Documents
Culture Documents
Icreu 2014 Sum C
Icreu 2014 Sum C
Integrated
Systems,
I. INTRODUCTION
Biomass
Liquid Bioethanol
Solid Briquettes
Electricity
Thermal
Vehicle Fuel
Fertilizers/
Organic
Manure
Waste
Management
Cooking
Wind
Industrial Needs
DC
Mechanical
Electric Grid
Electrical Needs
of community
Wind
Mechanical
Pump
V.PRELIMINARY DESIGN
Hybrid systems utilize more than one renewable resource, but
convert all of them into one form (typically electrical) for
distribution and use. Integrated systems also utilize more than
one resource, but match needs with resources a-priori to
maximize end-use efficiency and minimize cost.
Integrated renewable energy systems (IRES) utilize two or
more
Renewable energy resources
Conversion technologies, and
End-use technologies
To supply a variety of energy and other needs of differing
forms, qualities, and characteristics in an integrated fashion,
a preliminary design has been developed. Fig 7 shows the
block diagram of IRES with AC and DC buses.
REFERENCES
[1] Ramakumar R., and Hughes W.L.,1981, "Renewable
Energy Sources and Rural Development in Developing
Countries," IEEE Transactions on Education, Vol. E-24, NO.
3, pp 242-251.
[2] Priya Ramasubbu Sensors and Neural networks to
supervise
Integrated
Renewable
Energy
Systems
(IRES),thesis work,2006,submitted to faculty of the graduate
college of Oklahoma State University.
[3] R. Ramakumar, "Integrated Renewable Energy Systems,"
Power Engineering Review, IEEE , vol.15, no.2, pp.10-13,
Feb 1995.