Professional Documents
Culture Documents
First Law of Thermodynamics: Reversibility
First Law of Thermodynamics: Reversibility
Reversibility
A reversible process is a process where the effects of following a thermodynamic
path can be undone be exactly reversing the path.
An easier definition is a process that is always at equilibrium even when undergoing a
change.
Phase changes and chemical equilibria are examples of reversible processes.
Ideally the composition throughout the system must be homogeneous.
- This requirement implies that the no gradients, currents or eddys can exist.
- To eliminate all inhomogeneities, a reversible process must occur infinitely
slow!
- Thus no truly reversible processes exist. However, many systems are
approximately reversible. And assuming reversible processes will greatly aid
our calculations of various thermodynamic state functions.
Reversibility during pressure changes ensures that
p = pex
That is, the pressure on the inside of the container is always equal to the pressure
exerted on the outside of the container.
3
A more thermodynamically useful rearrangement (let F = pA and dV = dlA) is
w p ex dV
- the negative sign is a sign convention (discussed below)
- pex is the external pressure (the pressure outside the container)
- pex is used in definition because we really do not know what kind of pressures
develop during a thermodynamic change.
- i.e., pressure currents and eddies are likely for an arbitrary change.
Other forms of work are possible
w E dq
Electrical work
r
r
w E d VP
Polarization work (e.g., piezoelectricity)
w dA
w d
Surface tension
Twisting work
V T p
Isothermal compressibility
1 V
V p T
Enthalpy
Background
In order to fully explain his ideas of free energy, Josiah Willard Gibbs needed to
construct an energy state function that had the definition
H = U + PV
Gibbs named the quantity the heat content because a change in the quantity
corresponded to heat gained or lost by a system at constant pressure provided no nonpV work is being done, that is.
H q p
Kamerlingh Onnes eventually named the function, H the enthalpy and the name
stuck.
Heat capacity
- Heat is proportional to mass.
- Heat is proportional to temperature difference.
- Proportionality constant for a specific substance is the heat capacity or specific
heat.
q mCT
Definition of Constant Pressure Heat Capacity Cp
Since constant pressure heat is a change in enthalpy, the constant pressure heat
capacity can be rewritten as
H
T p
Cp
This quantity is one of the easily measurable quantities that is very important in
thermodynamics.
Definition of Constant Volume Heat Capacity Cv
Since constant volume heat is a change in internal energy, the constant volume heat
capacity can be rewritten as
U
T v
Cv
This quantity is another one of the easily measurable quantities that we will use a
great deal in thermodynamics studies.
Relationship between Cp and CV
One way of examining the difference between internal energy and enthalpy is by
examining the difference between the constant pressure heat capacity and the constant
volume heat capacity.
H U
T p T
Cp CV
U PV
U
T p T
U
V
U
P
T p T p T
PV
U
T p
T
7
U
since it is not an easily
T p
U
measurable quantity. We can find an alternative expression for
based the total
T p
differential of the internal energy.
At this point, we want to find another expression for
The internal energy is a function of temperature and volume, thus the total differential is
U
U
dT
T V V
dU
dV
T
T p
U T
T V T
U V
T T p
p V
U
U
T V V
T T
p
T V
Let us substitute our result into the original equation for Cp CV ,
U
V
U
P
T p T p T
Cp CV
U U
T V V
U
V
P
T
T p
p
U V
V
U
V
P
V
P
T p
V T T p
T p V T
What is the relationship between Cp CV for an ideal gas?
1 V
1
V T p V
T
P
T
nRT 1 nR nR
p
V p
pV
nR U
C p C V V
V
p
pV V
V T
nR
U
p
p
T
p V T
nR U
1 U
nR
p nR
p V
p V T p
U
Remember that for an ideal gas
0 , therefore
V T
8
1 U
1 nR
p V T
Cp C V nR
Heat Reexamined
Isothermal Heat
dq C dT q 0
Isochoric Heat
dq C V dT q CV dT
If CV is independent of temperature, (fair assumption for small temperature changes),
then
q C V dT C V dT C V T2 T1 C V T
Isobaric Heat
dq C p dT q Cp dT
Adiabatic Heat
By definition, q = 0
All of the above results are free from assumptions (unless noted).
Thermochemistry
9
Extent of Reaction
To monitor the progress, a variable known as the extant of reaction is defined as
n i n i,0
i
where ni is the number of moles of chemical species i, ni,0 is the initial number of
moles of chemical species i and i is the stoichiometric coefficient of the chemical
species i for the specific reaction occurring.
When the extent of reaction is defined this way, the value of the extant of reaction
does not depend on the chemical species used to examine the state.
Example: Consider the reaction P4 (s) + 5 O2 (g) 2 P2O5 (s). Suppose we start
with 3 moles of phosphorus and 15 moles of oxygen.
a) What is the extant of reaction when 4 moles of P2O5 has been created?
n i n i,0
i
4 mol 0 mol
2
2
Note: How much P4 has been consumed to create 4 moles of P2O5? A: 2 moles.
b) What is the extant of reaction when 2 moles of phosphorus has reacted?
n i n i,0
i
1mol 3mol
2
1
The definition includes the stoichiometric coefficient to put the changes of the all the
chemical species on an equal footing.
Soon we will be dealing reaction energies and other quantities specific to reactions.
The reaction energies need to be intensive quantities and yet each chemical species
may have a different amount. Thus reaction energies are defined with respect to the
extent of reaction so that the specific chemical species is not important, but the
reaction as a whole is important.
Standard States
10
Standard Pressure - p
Thermodynamic quantities are measured with respect to a pressure of 1 bar (100.000
kPa)
Standard Temperature - T
Thermodynamic quantities are measured with respect to a temperature of 25 C
(298.15 K)
Standard Concentration- c
Thermodynamic quantities are measured with respect to a concentration of 1m (that is
1 molal).
- Molal is used as a concentration unit rather than molar because molal is
independent of temperature.
Biological Standard State
The biological standard state is a pressure of 1 bar, a temperature of 37 C and
pH of 7, (that is [H+] = 1.0 10-7).
11
Hess Law
Since enthalpy is a state function, we can choose more than one thermodynamic path
to calculate a state function.
For chemical changes, Hess Law states that the enthalpy of a reaction can be
calculated from the enthalpies of all of the chemical step processes needed for the
chemical reaction.
In other words, if reactions can be added together to form a resultant reaction, then
enthalpies of the step reactions can be added to find a resultant enthalpy of reaction.
Example: Calculate the enthalpy of reaction for the following reaction:
2 Al(s) + 3 Cl2(g) 2 AlCl3(s), given the reactions below.
2 Al(s) + 6 HCl(aq) 2 AlCl3(aq) + 3 H2(g)
HCl(g) HCl(aq)
H2(g) + Cl2(g) 2 HCl(g)
AlCl3(s) AlCl3(aq)
H = -1049 kJ/mol
H = -74.8 kJ/mol
H = -185 kJ/mol
H = -323 kJ/mol
Rearrange the equations such that their sum is the reaction of interest.
2 Al(s) + 6 HCl(aq) 2 AlCl3(aq) + 3 H2(g)
6[HCl(g) HCl(aq)]
3[H2(g) + Cl2(g) 2 HCl(g)]
2[AlCl3(aq) AlCl3(s)]
H = -1049 kJ/mol
H = 6[-74.8 kJ/mol]
H = 3[-185 kJ/mol]
H = 2[+323 kJ/mol]
H = -1406 kJ/mol
12
Enthalpy of Formation
The enthalpy of formation is the enthalpy of a formation reaction for a particular
substance.
A formation reaction is that where a compound is formed from elements in the
naturally occurring state.
2 C(s) + 3 H2(g) + O2(g) C2H5OH (l)
P4 (s) + 5/2 O2(g) P2O5(s)
7 Fe(s) + 18 C(s) + 9 N2(g) Fe4[Fe(CN)6]3 (s)
Enthalpy of formation of the elements
By definition, the enthalpy of formation of an element in its natural state is zero.
fH(B(s)) = 0 kJ/mol
fH(S8(s)) = 0 kJ/mol
fH(C(graphite)) = 0 kJ/mol
fH(Ag(s)) = 0 kJ/mol
fH(Br2(l)) = 0 kJ/mol
fH(Xe(g)) = 0 kJ/mol
13
CH3COOH(l) + C4H9OH(l) C4H9OOCCH3(l) + H2O(l)
H = - 84 kJ/mol
Calorimetry
Constant Pressure Calorimeter
- coffee cup calorimeter
- open to atmosphere
- appropriate for solution chemistry
Constant Volume Calorimeter
- bomb calorimeter
- sealed and isolated
- appropriate for gas phase chemistry
Adiabatic Calorimeter
- heat measured by temperature needed to keep thermal energy constant.
Process of measuring heat of combustion with bomb calorimeter
1. Mass wick used to start combustion.
2. Mass water used to absorb heat.
3. Mass standard (benzoic acid) to be combusted
4. Add water to combustion chamber to ensure that water from combustion will be
in liquid phase.
5. Load standard and seal
6. Fill combustion chamber with oxygen ( 25 atm)
7. Begin combustion and record temperature change of water.
8. Calculate heat capacity of calorimeter from standard
- need to account for heat of wick, and heat capacity of water.
9. Repeat process with sample.
- with heat from wick, heat from the water and heat from the calorimeter, the
heat of combustion of sample can be calculated.
Hess law is often used to the enthalpy of formation of a substance after its enthalpy
of combustion has been calculated.
Example: 0.523 g of the military explosive, cyclotetramethylenetetranitramine
(HMX), C4H8N8O8 is combusted in a bomb (!) calorimeter and an internal
energy change of 4.620 kJ is measured. Calculate the enthalpy of
formation for HMX.
First write a balanced equation for its complete combustion.
C4H8N8O8(s) + 2 O2(g) 4 CO2(g) + 4 H2O(l) + 4 N2(g)
Next calculate the molar internal energy of reaction from the experimental data.
14
4.62 kJ 296.155g
2616 kJ mol
0.523g
mol
To calculate the enthalpy of the reaction, we need to return the definition of enthalpy.
H U PV U nRT U n RT
Reexamining the balanced chemical equation, we see that
8 moles 2 moles = 6 moles of gas has been produced.
C4H8N8O8(s) + 2 O2(g) 4 CO2(g) + 4 H2O(l) + 4 N2(g)
0.008314kJ
298.15K
mol K
H U n RT 2616 kJ mol 6
2.478kJ
2616 kJ mol 14.87 kJ mol 2601kJ mol
mol
2616 kJ mol 6
The molar enthalpy of reaction can also be written in terms of the molar enthalpies of
formation.
4 fH(CO2(g)) + 4 fH(H2O(l)) - fH(C4H8N8O8(s)) = rH
Rearranged, the equation becomes,
fH(C4H8N8O8(s)) = 4 fH(CO2(g)) + 4 fH(H2O(l)) - rH
From table, we find the enthalpies of formation for CO2(g) and H2O(l)
fH(C4H8N8O8(s)) = 4 (-393.5 kJ/mol) + 4 (-285.8 kJ/mol) - (-2601 kJ/mol)
= -116 kJ/mol
Temperature Dependence of Internal Energy and Enthalpy
U
and
T V
Recall that C V
T p
Cp
These relationships imply that we can find the internal energy or enthalpy at a
nonstandard temperature as long as we know the heat capacity.
dU C V dT and dH C p dT
15
Integrating both sides of these equations yields
U CV dT and H Cp dT
For large temperature changes, we cant assume that the heat capacity is independent
of temperature. Thus to calculate the internal energy or enthalpy at a nonzero
temperature, we need the temperature dependence of the heat capacity.
Example: Calculate the change in enthalpy of H2 (g) from 373 K to 1000 K, given
2
that the constant pressure heat capacity has the form C p d eT fT
where d = 27.28 J/K mol, e = 0.00326 J/K2 mol and f = 0.00050 J K/mol.
H H1000 K H373 K Cp dT d eT fT
d T |1000
373
1000
1000
1000
373
373
373
dT d dT eT dT fT
dT
eT 2 1000 f 1000
e
1
1
|373 |373 d 1000 373 10002 3732 2f
2
T
2
1000 373
0.00326 J K 2 mol
27.28 J K mol 627 K
860871K 2
2
2 0.00050 J K mol 0.0016810K 1
17105 J mol 1403J mol 1.68 10 6 J mol 18508 J mol 18.51kJ mol
Kirchoffs law
r H T r H 298 K
0
C
i
p,i
dT
298 i
That is by taking a stoichiometric sum of the heat capacities and integrating over the
temperature range, we can find the correction to the reaction enthalpy at a non
standard state temperature.
16
Example: 471 kJ/mol is the reaction enthalpy under standard conditions for the
following reaction: 2 Fe2O3(s) + 3 C(s) 4 Fe(s) + 3 CO2(g). What is
the reaction enthalpy at 1000 K?
According to the NIST Webbook Internet site, the constant pressure heat capacities of
the chemical species in the above smelting process can be fitted according to the
2
3
2
Shumate equation, C p A BT C T D T E T
The values for A, B, C, D and E for each species are given below.
Fe2O3
C
CO2
Fe
Sum
A
93.43834
10.68
24.99735
18.42868
-70.2099
B
0.108358
0
0.055187
0.024643
0.047418
r H 1000 K r H 298 K
0
C
-5.08645 10-5
0
-3.36914 10-5
-8.91 10-6
-3.50 10-5
1000 K
A
i
298K
D
2.56 10-8
0
7.95 10-9
9.66 10-9
1.13 10-8
E
-1610000
0
-137000
-12600
2762174
Bi T Ci T 2 Di T 3 E i T 2 dT
r H 0 298 K i Ai T |1000
T |298 T |298 T |298 E i T 1 |1000
298
298
2
3
4
mol
2
3.50 105
1.13 108
1
1
3
3
1000 298
10004 2984 2762174
3
4
1000 298
471kJ 49.3kJ 21.6kJ 34.1kJ 11.2kJ 6.5kJ 413.9kJ
r H 1000 K
mol
mol
mol
mol
mol
mol
mol
r H 1000 K
C V
T V
and
C p
T p
Bond Enthalpies
A bond enthalpy is the energy needed to separate two atoms.
Tabulated bond enthalpies are average values calculated from the dissociation of
many different compounds.
17
Thus tabulated bond enthalpies are approximate values.
*However, they can be useful for approximating enthalpies of reaction because
most of the chemical energy of a compound is held in its bonds.*
Work Reexamined
Isochoric Work
pV work involves a volume change. w p ex dV
Since a constant volume process has no volume change, w = 0 if there is no other
work (no non-pV work).
No other assumptions have been made about the system.
Isobaric Work
Since the pressure is constant, it has no dependence on the volume. Thus the pressure
can pulled out of the integral. Subsequently, the integral of dV is V2 V1 = V
w p ex dV pex dV p ex V2 V1 p ex V
The only other assumption made is that the system does not have any non-pV work.
Isothermal Work
In general we need to know the relationship between pressure and volume to perform
the calculation, i.e, we need an equation of state. Let us do the calculation for an
ideal gas under reversible conditions.
w p ex dV p dV
nRT
dV
nRT
dV
V
dU
V2
V1
nRT
ln
18
V U
Joule coefficient - J
- internal pressure
q = 0, w = 0
U = 0
isoenergetic process
T
p H
Joule-Thomson coefficient - JT
- isoenthalpic, adiabatic
- = 0 for an ideal gas
Classic Experimental Apparatus
- measure JT directly.
19
0
Vf
Vi
U U f U i pi dV p f dV pi Vi p f Vf
U f pi Vi U i p f V H f H i
Modern Experimental Apparatus
H
p T
- use isothermal conditions rather adiabatic conditions.
- measure JT via
isothermal conditions:
T p H
p H H T T
T
1
p
1
T T
p H
H
H T T p
T p
T T
JT
Cp
T1 = T2
H
T
Cp
20
Isoenthalps on T- p plot.
- inversion temperature
- > 0 for substance to be used as a refrigerant
- temperature must decrease as pressure decreases.
21
nRT an 2
V b V2
nRT an 2
w p ex dV p dV
2 dV
Vb V
V b
1 1
nRT ln 2 an 2
V1 b
V2 V1
nRT
dV
Vb
an 2
V2 dV
T p T
Cp Cv
dU
T p
V
U U
V
U T
T p V T T p T V T p
U
U
dV
V T
T
dU
T V
dT
U
U
T p V
H
T p
H U pV
V U
V
T p V T T
pV
U
V
p
T p T p T
U
V U
p
T p T p T
p
p V
V
V
T p
U
p V
p
T
V U
U
p
p
V
T p V T
V
U
dV
T
T
T T p
Cp Cv
dT
V
U
U
V
V
T V
T T p
V p T
T
22
dU
q
- p dV
ex
dU
U q
dU
C dTv p dV
ex
U C dTv
p dV
ex
C dTv p V
dU
q
p dV
ex
dU
U C dTv
23
Enthalpy Reexamined
Why is H = qp under isobaric conditions?
H U pV dH dU d pV =q + w + p dV + v dp
dH =q + -p dV + p dV + v dp
dH q
H q p
dH q
H C pdT q
Isochoric Enthalpy
H U pV dH dU d pV =q + w + p dV + v dp
dH =q p dV + p dV + v dp
dH q + v dp
H C pdT v dp
nRT
dp
p
p2
?
p1
- temperature has a dependence on the pressure.
Isothermal Enthalpy
H U pV dH dU d pV = C p dT H 0
24
Important: All of the above enthalpies assume that the system has no non-pV work
and reversible conditions (so that P = Pex)
Summary
Isothermal T = 0
Isobaric p = 0
Isochoric V = 0
Adiabatic q = 0
Definition of work: w p ex dV
Definitions for heat: qp = H
qV = U
n i n i,0
i
T p T
Cp
U q w
T v
Cv
U CdT p dV
ex
25
Cv
V T p
V p T
T p
T v
V U
p H
U
and internal pressure T
(equals zero for ideal gas)
V T
Natural variables of U and H and total differentials
H
H
dp
dT
T p
p T
dH
Hess law
Temperature Dependence of Enthalpy and Internal Energy
U CV dT and H Cp dT
Kirchoffs law
r H T r H 298 K
0
C V
T V
and
%C
% R
C
p
V
Cp
Cv
C
i
p,i
dT
298 i
C p
T p
26