Professional Documents
Culture Documents
Huawei NE40E Router Quick Ordering Guide (2012!10!30)
Huawei NE40E Router Quick Ordering Guide (2012!10!30)
Product Overview
The NetEngine40E series universal service router (NE40E) is a family of high-end
network products that are usually deployed at the edges of Internet Protocol (IP)
backbone networks, IP Metropolitan Area Networks (MANs), and other large-scale IP
networks. The NE40E, ME60, NE20E-S and NE5000E together provide a complete,
layered IP network solution.
The NE40E can be flexibly deployed at the edge or core of IP or MPLS networks,
simplifying the network structure. With its ability to provide an extensive range of services
with reliable service quality, the NE40E is enabling IP and MPLS bearer networks to
develop greater broadband capacity and to become more secure, intelligent, and
service-oriented. Based on distributed hardware forwarding and non-blocking switching
technologies, the NE40E features line-rate forwarding capability, a well designed Quality
of Service (QoS) mechanism, strong service processing capability, and excellent
expansibility. The NE40E is based on a 400G platform and provides 100G line cards to
satisfy increased demand for bandwidth. Compatible with all line cards currently in use,
the NE40E minimizes the need for additional investments.
Ordering
NE40E Router Configuration Flow: Basic Configuration -Services BoardsSpecial
Service BoardsSoftware, LicenseElectrical or Optical Modules Cabinet
Cables Accessories
1 Basic Configuration
1Chassiswith power
Select a chassis based on the number of service boards
required.
BOM Number
SBOM Type
Description
Main
Switc
Servic
Power
Maximum Power
Control
hing
Slots
Consumption
Slots
02351596
NetEngine40E-X3,C
CR52-BKPE-4
U-DC
02351597
CR52-BKPE-5
U-AC
<=1100W
R5Z1BKPE,Integrate
d
DC
In the
Chassis
chass
Components(NE40E
-X3)-4U
1+1
NetEngine40E-X3,C
Backup
R5Z2BKPE,Integrate
d
AC
Chassis
Components(NE40E
-X3)-5U
is, no
need
to
config
ure
<=1100W
02351930
NetEngine40E,CR5Z
CR5B0BKP08
70
1BKP08A,NE40E-X8
Integrated
Chassis
Components(Includi
<=3300W
1+1
Backup
ng 4 DC Power)
02351931
NetEngine40E,CR5Z
CR5B0BKP16
70
1BKP16A,NE40E-X1
6 Integrated Chassis
Components(Includi
<=6500W
1+1
16
Backup
ng 8 DC Power)-32U
02400376
CR5B0PWRB
X60
Power Distribution
Cabinet,220V,50/60
HZ,72000mA,None,
EPS200-4850A
02130872
WPSU50A00
Power
module--33degC-65
degC-90VAC-290VA
C-(-53.5)VDC/54.2AAC/DC rectifier
04080076
None
2Main control and SFUSelect a main control board according to the chassis,
bandwidth and backup requirements.
BOM
SBOM Type
Description
Number
Applicable
Backup
Remarks
Chassis
03030KKR
CR52-MPUD
03054206
CR5D0MPUD
170
03030KSR
CR5D0SRUA4
70
NetEngine40E,CR5
2MPUD0,Main
Processing
Unit
D(Including
1*2G
Memory and 1*1G
CF Card)
NetEngine40E,CR5
2MPUD2,Main
Processing
Unit
D2(Including
2G
Memory and 2G
USB)
NetEngine40E,CR5
7SRU40A4,Switch
and
Route
Processing
Unit
1:1
1:1
1:1
NE40E-X3
NE40E-X3
NE40E-X8
A4(Including 1*2G
Memory and 1*1G
CF Card)
03053549
CR5D0SRUA5
70
03030KSY
CR5DSFUI407
C
03053548
CR5DSFUIE0
7C
NetEngine40E,CR5
7SRU200A5,Switch
and
Route
Processing
Unit
A5(Including
One
2G Memory and
One 1G CF Card)
NetEngine40E-CR5
7SFU40C0-40Gbps
Switch Fabric Unit C
NetEngine40E-CR5
7SFU200C0-200Gb
ps Switch Fabric
Unit C
NE40E-X8
2+1
NE40E-X8
NE40E-X8
1:1
CR5D0MPUB
460
03030KSX
CR5DSFUI407
B
03053547
Not preferred
2+1
03030JTW
CR5DSFUIE0
7B
NetEngine40E,CR5
6MPUB4,Main
Processing
Unit
B4(Including 1*2G
Memory and 1*1G
CF Card)
NetEngine40E-CR5
7SFU40C0-40Gbps
Switch Fabric Unit B
NetEngine40E-CR5
7SFU200B0-200Gb
NE40E-X1
6
NE40E-X1
3+1
Not preferred
6
NE40E-X1
3+1
ps Switch
Unit B
Fabric
SBOM Type
Model
Description
Remarks
02315064
CF-512M
CF Card
512 MB CF card
Mandatory.
02316042
CF-1G
CF Card
1 GB CF card
Mandatory.
02315063
MEM-1G-184pin
Memory
MEM-1G-184pin
Card
SDRAM type. This type of
memory cards is applied to
the MPUs on the NE40E-X3
and NE40E-X16 and SRU on
the NE40E-X8.
02316431
MEM-2G-240pin
Memory
Card
2GB 240pin
memory module
06010171
NUSBDSK01
USB Disk
Storage,
USB
disk,4GB/USB2.0
the
MPUB4
of
the
NE40E-X16.
NE40E-X3
The CR52MPUD (03030KKR) of the NE40E-X3 can be configured with two CF cards
and the maximum capacity of a single CF card can be 1 GB.
By default, the CR52MPUD is already attached with one 1 GB CF card. During
configuration, you must configure another CF card. The CF card with the BOM number
being 02316042 is recommended.
The CR52MPUD2 contains CF cards. Customers do not need to purchase
additionally.
The CR52MPUD (03030KKR) of the NE40E-X3 has one memory slot and supports
single DDR2 memory cards of a maximum of 2 GB.
By default, the CR52MPUD is already attached with a 2 GB memory card. You do not
need to purchase the memory card independently during the contract configuration.
The CR52MPUD2 contains 2 GB DDR3 memory cards. Customers do not need to
purchase additionally.
CR52-MPUD does not support USB disks. CR5D0MPUD170 supports 2G USB and it
is contained and need not to be configured.
NE40E-X8
The CR57SRU40A4 (03030KSR) of the NE40E-X8 can be configured with two CF
cards and the maximum capacity of a single CF card can be 1 GB.
By default, the CR57SRU40A4 is already attached with one 1 GB CF card. During
configuration, you must configure another CF card. The CF card with the BOM number
being 02316042 is recommended.
he CR57SRU40A4 (03030KSR) of the NE40E-X8 supports 2 GB DDR2 SDRAM
memory cards and can be configured with a maximum of two such memory cards. The
CR57SRU40A4 is already attached with one 2 GB memory card.
It is recommended that the CR57SRU40A4 be configured with another memory card
of the BOM number 02316431 during the contract configuration.
The CR57SRU40A4 (03030KSR) of the NE40E-X8 supports two USB2.0 interfaces.
Each SRU40A4 supports a maximum of two USB disks, and each NE40E-X8 supports a
maximum of four USB disks. By default, no USB disk is configured. How many USB disks
(06010161 or 06010171) needs to be configured depend on customers' requirements.
The USB disk is used to upgrade the system software package. It is recommended that
each device be configured with one USB disk. After the upgrade, you need to copy the
system software package to the CF card.
NE40E-X16
The CR56MPUB4 (03030JTW) of the NE40E-X16 can be configured with two CF
cards and the maximum capacity of a single CF card can be 1 GB.
By default, the CR56MPUB4 is already attached with one l GB CF card. During
configuration, you must configure another CF card. The CF card with the BOM number as
02316042 is recommended.
The CR56MPUB4 (03030JTW) of the NE40E-X16 supports 2 GB DDR2 SDRAM
memory cards and can be configured with a maximum of two such memory cards. The
CR56MPUB4 is already attached with one 2 GB memory card.
It is recommended that the CR56MPUB4 be configured with another memory card of
the BOM number 02316431 during the contract configuration.
In 1:1 mode of MPUs or SRUs, the capacity of the memory cards of the MPUs or
SRUs must be the same. The memory cards configured for one board must share the
same BOM number, and it is better to have them supplied by the same manufacturer.
The CR56MPUB4 (03030JTW) of the NE40E-X16 supports two USB2.0 interfaces.
Each MPUB4 supports a maximum of two USB disks, and each NE40E-X16 supports a
maximum of four USB disks. By default, no USB disk is configured. You can determine the
number of USB disks with the BOM number being 06010161 or 06010171 according to
customers' requirements. The USB disk is used to upgrade the system software package.
It is recommended that each device be configured with one USB disk. After the upgrade,
you need to copy the system software package to the CF card.
2 Service Slots
1Configuration Notes of the LPUF-10: The LPUF-10 (03038461) is a 10 Gbit/s
platform for flexible cards. It provides four slots for flexible cards of the same type or
different types, and supports hot swap of flexible cards. The LPUF-10 supports a
maximum of 10-Gbit/s bandwidth. When the total bandwidth of ports in the four slots
exceeds 10 Gbit/s, the line-rate forwarding performance is not ensured.
BOM Number
03038461
SBOM Type
CR53-LPUF-10
Description
Flexible Card Line Processing
Unit(LPUF-10,four slots)
Remarks
The LPUF-10 (03038461) is a 10 Gbit/s
platform for flexible cards. It provides four
slots for flexible cards of the same type or
CR53-P10-1xPOS
/STM64-XFP
1-Port OC-192c/STM-64c
POS-XFP Flexible
Card(Occupy two slots)
03030EYA
CR53-P10-8x100/
1000Base-X-SFP
8-Port 100/1000Base-X-SFP
Flexible Card
03030GBV
CR53-P10-1xPOS
/STM16-SFP
1-Port OC-48c/STM-16c
POS-SFP Flexible Card
03030GUG
CR53-P10-2xATM
/STM4-SFP
2-Port OC-12c/STM-4c
ATM-SFP Flexible Card
03030GBR
CR53-P10-4xATM
/STM1-SFP
4-Port OC-3c/STM-1c
ATM-SFP Flexible Card
03030HNJ
CR53-P10-2xPOS
/STM16-SFP
2-port OC-48c/STM-16c
POS-SFP Flexible Card
03030JCX
CR53-P10-4xPOS
/STM16-SFP
4-port OC-48c/STM-16c
POS-SFP Flexible Card
03030JCY
CR53-P10-4xPOS
/STM4-SFP
4-port OC-12c/STM-4c
POS-SFP Flexible Card
CR53-P10-4xPOS
/STM1-SFP
4-port OC-3c/STM-1c
POS-SFP Flexible Card
03030JUB
CR53-P10-8xPOS
/STM4-SFP
8-port OC-12c/STM-4c
POS-SFP Flexible Card
03030JUA
CR53-P10-8xPOS
/STM1-SFP
8-port OC-3c/STM-1c
POS-SFP Flexible Card
03030KBB
03030HNE
CR53-P10-2xcPO
S/STM1-SFP
CR53-P10-4xE3/c
T3-SMB
2-Port Channelized
OC-3c/STM-1c POS-SFP
Flexible Card
03030KHP
CR53-P10-24xcE
1/cT1-DB100
24-Port Channelized
E1/T1-DB100 Flexible Card
(Supporting 1588v2)
03030KNE
CR5M0E8GFA30
8-Port 100/1000Base-X-SFP
Flexible Card
A(P10-A,Supporting 1588v2)
02351606
DB100-24xRJ48E1/T1-Box
02351607
DB100-48xRJ48E1/T1-Box
02351608
DB100-24xSMB-E
04070064
1-Box
Conversion Box
DB100-DB100-Ca
ble-4m
2 Configuration Notes of the LPUF-21: The LPUF-20 and LPUF-21 are newly
increased in NE80E/40E V300R003. Adopting the SD588 processors, the LPUF-20 and
LPUF-21 are 20 Gbit/s platforms for flexible cards and support a maximum bandwidth of
20 Gbit/s. When the total bandwidth of the interfaces on the LPUF-20 and LPUF-21 in two
slots exceeds 20 Gbit/s, the line-rate forwarding performance is not ensured on all
interfaces. The LPUF-20/21 provides two slots for flexible cards of the same type or
different types. According to the support for hot swap of the flexible card, the LPUF-20 can
be classified into the LPUF-20 supporting hot swap (03030HVN and 02316416) and the
LPUF-20 that does not support hot swap (02315504 and 02315756). The LPUF-21
supports hot swap of the flexible card.
In the case of the LPUF-20 that does not support hot swap of the flexible card, before
installing the LPUF-20, you need to first insert flexible cards into the LPUF-20, and before
removing flexible cards, you need to first remove the LPUF-20. In the case of the LPUF-20
that supports hot swap of the flexible card and the LPUF-21, you can install the
LPUF-20/21 and insert or remove the flexible cards in any order. The LPUF-20/-21-A
supports services such as L3VPN, MVPN, and enhanced IPV6.
BOM Number
03030KJY
03053989
SBOM Type
CR52-LPUF-21-A
CR5DLPUF202E
Description
Remarks
03030GSG
CR52-P20-12x10/100/
1000Base-TX-RJ45
12-Port
10/100/1000Base-RJ45
Flexible Card
03030GSK
CR52-P20-1x10GBas
e WAN/LAN-XFP
1-Port 10GBase
WAN/LAN-XFP Flexible Card
CR52-P20-12x100/10
00Base-X-SFP
12-Port 100/1000Base-SFP
Flexible Card
03030HND
CR52-P20-1xPOS/ST
M64-XFP
1-Port OC-192c/STM-64c
POS-XFP Flexible Card
03030JUJ
CR52-P21-40x10/100/
1000Base-TX-RJ45
40-Port
10/100/1000Base-RJ45
Flexible Card(Occupy two
sub-slots)
03030JUL
CR52-P21-40x100/10
00Base-X-SFP
40-Port 100/1000Base-SFP
Flexible Card(Occupy two
sub-slots)
03030JUK
CR52-P21-4x10GBas
e WAN/LAN-XFP
4-port 10GBase
WAN/LAN-XFP Flexible
Card(Occupy two sub-slots)
CR52-P20-48x10/100
Base-TX-RJ45
2-Port 10GBase
LAN/WAN-XFP+20-Port
100/1000Base-X-SFP
Flexible Card(P20,Occupy
two sub-slots)
03030KKP
CR52-P20-12x100/10
00Base-X-SFP-A
1-Port 10GBase
WAN/LAN-XFP Flexible Card
A(Supporting 1588v2)
03030KKQ
CR5ML2XEEG20
12-Port 100/1000Base-SFP
Flexible Card A(Supporting
1588v2)
03030HVJ
03030HVH
12-Port
100/1000Base-X-SFP
Flexible Card B(P20-B)
1-Port 10GBase
LAN/WAN-XFP Flexible Card
B(P20-B)
CR5M0EBGFB20
CR5M0L1XXB20
03030LVG
03030LVF
CR5M0L1XXE20
1-Port 10GBase
LAN/WAN-XFP Flexible Card
E(P20-E)
10-Port 1000Base-X-SFP
Flexible Card E(P20-E)
CR5M0EAGFE20
3Configuration Notes of the LPUF-40: The LPUF-40 is a 40 Gbit/s platform for flexible
cards and supports a maximum bandwidth of 40 Gbit/s. The LPUF-40 provides two slots
for flexible cards of the same type or different types, and supports hot swap of the flexible
card.
The LPUF-40-A supports services such as L3VPN, MVPN, and enhanced IPV6.
BOM Number
SBOM Type
03030KWD
CR5MLPUF402A
03053990
Description
Remarks
CR5DLPUF402E
03036967
CR5M00EEGF20
20-Port
100/1000Base-X-SFP
Flexible Card(P40)
CR5M0EEGFA20
20-Port
100/1000Base-X-SFP
Flexible Card
A(P40-A,Supporting 1588v2)
03036752
CR5M00L2XX20
2-Port 10GBase
LAN/WAN-XFP Flexible
Card(P40)
03038466
CR5M0L2XXA20
2-Port 10GBase
LAN/WAN-XFP Flexible Card
A(P40-A,Supporting 1588v2)
03030MDK
CR5M0L2XXB20
2-Port 10GBase
LAN/WAN-XFP Flexible Card
B(P40-B,Supporting PPPoE
and IPoE)
03030MDS
CR5M0EEGFB20
20-Port
100/1000Base-X-SFP
Flexible Card
B(P40-B,Supporting PPPoE
and IPoE)
03030MLA
CR5D00EEGE70
20-Port
10/100/1000Base-RJ45
Flexible Card(P40)
CR5D00L4XX70
4-Port 10GBase
LAN/WAN-XFP Flexible
Card(P40,Occupy one
sub-slot)
03030LXH
03030LYU
20-Port 1000Base-X-SFP
Flexible Card E(P40-E)
CR5D0EEGFE70
2-Port 10GBase
LAN/WAN-XFP Flexible Card
E(P40-E)
CR5D0L2XXE70
4Configuration Notes of the LPUF-100: The LPUF-100 is a 100G flexible card platform
and supports a maximum bandwidth of 100 Gbit/s.The LPUF-100 provides four subcard
slots and supports the mixed configuration of subcards of various types. In addition, the
LPUF-10 supports hot swap of subcards.
The LPUF-100 supports services such as L3VPN, MVPN, and IPV6 enhanced.
BOM Number
SBOM Type
03053589
CR5DLPUFA070
03030MXM
CR5D0L5XXA70
Description
Remarks
NetEngine40E,CR57LPUF10
1A0,100Gbps Flexible Card
Line Processing
Unit(LPUF-100,4 sub-slots)
5-Port 10GBase
LAN/WAN-XFP Flexible Card
A(P100-A,Supporting
1588v2,Occupy two
sub-slots)
03030MXA
CR5D00EMGF72
48-Port
100/1000Base-X-CSFP
Flexible Card(P100,Occupy
two sub-slots)
03030NCF
CR5D00EFGF70
24-Port
100/1000Base-X-SFP
Flexible Card(P100,Occupy
two sub-slots)
03030MXC
CR5D0L5XFB70
5-Port 10GBase
LAN/WAN-SFP+ Flexible
Card B(P100-B,Occupy two
sub-slots)
03030MXN
CR5D00P1MZ70
1-Port OC-768c/STM-256c
POS-2KM-LC Flexible
Card(P100,2 sub-slots)
03030MXQ
CR5D00P2XX70
2-Port OC-192c/STM-64c
POS-XFP Flexible
Card(P100,Occupy one
sub-slot)
55.5.5 Configuration Notes of the LPUI: The integrated LPU is not a flexible LPU. The
integrated LPU includes the 100G LPUI-100 and 40G LPUI-41.
BOM Number
03053481
03053480
03053421
03053422
03053423
SBOM Type
CR5D0LAXXA70
CR5D00EDXF70
CR5D00L8XX70
CR5D00L4XX71
CR5D00EMGF70
Description
Remarks
NetEngine40E,CR57L5XFA0
,5-Port 10GBase
LAN/WAN-SFP+ Flexible
Card B(P100-B,Occupy two
sub-slots)
NetEngine40E,CR57EDXFB
0,16-Port 10GBase
LAN-SFP+ Integrated Line
Processing Unit (LPUI-100)
NetEngine40E,CR57L8XXB0
,8-Port 10GBase
LAN/WAN-XFP Integrated
Line Processing Unit
(LPUI-41)
NetEngine40E,CR57L4XXB0
,4-Port 10GBase
LAN/WAN-XFP Integrated
Line Processing Unit
(LPUI-41)
NetEngine40E,CR57EMGFB
0,48-Port
100/1000Base-X-SFP
Integrated Line Processing
Unit (LPUI-41)
03053420
CR5DL2XEFG70
NetEngine40E,CR57L2XEF
GB0,2-Port 10GBase
LAN/WAN-XFP+24-Port
100/1000Base-X-SFP
Integrated Line Processing
Unit (LPUI-41)
03053542
CR5D0L4XXA70
NetEngine40E,CR57L4XXC
0,4-Port 10GBase
LAN/WAN-XFP Integrated
Line Processing Unit
(LPUI-41,Supporting
1588v2)
03053543
CR5D0EKGFA70
03053544
CR5DL2XEEG7A
NetEngine40E,CR57EKGFC
0,40-Port
100/1000Base-X-SFP
Integrated Line Processing
Unit (LPUI-41,Supporting
1588v2)
NetEngine40E,CR57EKGFC
0,40-Port
100/1000Base-X-SFP
Integrated Line Processing
Unit (LPUI-41,Supporting
1588v2)
The LPUI-100 can only be used on the NE40E-X8/X16, and must be used with the 200G
MPU and 200G SFU. CR5D0SRUA570(03053549) and CR5DSFUIE07C (03053548) are
needed on NE40E-X8; CR5DSFUIE07B (03053547) is needed on the NE40E-X16.
SBOM Type
Description
Remarks
03030LXJ
CR53-SPU-C
03053128
0305G062
CR5DVSUI201A (VSUI-20-A)
4 Software, License
DescriptionStarting from V300R003, the NE40E/80E adopts the License-based sale
strategy. The general principle is as follows:
1. Base package
The base package is mandatory item to be purchased for the NE40E/80E of each version,
especially at a new site.
2. Feature license
Feature licenses are controlled and are sold according to the features required by
customers. Feature licenses of the NE40E/80E are classified into device licenses and
board licenses. For device licenses, each device needs to be configured with one device
license, for example, a 1588v2 Function License for the 1588v2 feature. For board
licenses, each board needs to be configured with one license, for example, the
LPUF-40-B Upgrade to LPUF-40-A License.
3. Upgrade fee
If customers attempt to upgrade the earlier versions to use new features, they need to pay
the upgrade fee. For upgrades on Huawei's account, such as bug fixing or contract
obligation, the upgrade fee is charged as required.
Software sale strategies may be adjusted. For detailed information about licenses on sale,
refer to the latest Quoter-d system.
BOM Number
SBOM Type
Description
Remarks
88030YTE
CR5S40BS6500
NetEngine40E&80E basic
software,VRP5, V600R005
81400135
SWP-CR53LIC-V3R3Update
SWP-CR53LIC-V3R3Update NetEngine80E/40E
V300R003 upgrade
88030BUW
CR5S40EF0000
CR5S40EF0000
81400189
CR5S40CLCK00
82400144
CR5S40BTOA00
NetEngine40E&80E
It is a board license.
LPUF-40-B Upgrade to
LPUF-40-A License (L3VPN,
Ability of MVPN, IPv6
Enhanced)
82400189
SWP-CR52LIC-21BToA
NetEngine80E/40E
LPUF-21/20-B Upgrade to
LPUF-21/20-A License
(IPv6, L3VPN, MVPN)
82400137
SWP-CR53LIC-NetStream-SPUC NetEngine80E/40E
NetStream License for
SPUC
82400141
SWP-CR53LIC-MVPN-SPUC
NetEngine80E/40E MVPN
License for SPUC
82400140
SWP-CR53LIC-Tunnel-SPUC
NetEngine80E/40E Tunnel
Each SPUC requires one.
(GRE, Lawful interception, 4
over 6, etc.) License for
SPUC
82400204
CR5S40VIDE00
Resource,
NetEngine40E&80E,
LCR5VIDE00,
NetEngine40E&80E Video
Enhanced Function License
82400205
CR5S40SNAT00
It is a board license.
81400208
CR5S40MHAG00
NE40E&80E Cross-chassis
HAG Function License
It is a device license.
82400207
CR5S40BRAS00
NE40E&80E PPPoE/IPoE
Function License for
LPUF-21
82400208
CR5S40BRAS01
NE40E&80E PPPoE/IPoE
Function License for
LPUF-40
81400210
CR5S40L2TP00
NetEngine40E&80E L2TP
Function License
It is a device license.
81400281
CR5S4000LI00
NetEngine40E&80E Lawful
Interception Function
License
It is a device license.
81400279
CR5S400DAA00
NetEngine40E&80E DAA
Function License
It is a device license.
81400285
CR5S400MDI00
NetEngine40E&80E Video
It is a device license.
Monitoring Function License
82400240
CR5S40NATS00
NetEngine40E&80E 2M
NAT Session License
It is a device license.
82400220
CR5S400DPI00
NetEngine40E&80E DPI
Function License for
VSUF-10
82400247
CR5S40DUAF00
NetEngine40E&80E DPI
Signature Database
Upgrading Annual Fee
It is a device license.
Description
Mode
Remarks
3406028
7
Optical
Transceiver,SFP,1310nm,STM1,-19~-14dBm,-30dBm,LC,MM,2km
Multimo
de
Recommended
3406027
6
Optical
Transceiver,eSFP,1310nm,STM1,-15~-8dBm,-31dBm,LC,SM,15km
Single
mode
Recommended
3406028
1
Optical
Transceiver,eSFP,1310nm,STM1,-5~0dBm,-37dBm,LC,SM,40km
Single
mode
Recommended
3406028
2
Optical
Transceiver,eSFP,1550nm,STM1,-5~0dBm,-37dBm,LC,SM,80km
Single
mode
Recommended
3406028
7
Optical
Transceiver,SFP,1310nm,STM1,-19~-14dBm,-30dBm,LC,MM,2km
Multimo
de
Recommended
3406029
9
Optical
Transceiver,eSFP,1310nm,STM1,-15~-8dBm,-31dBm,LC,SM,15km
Single
mode
Recommended
3406030
0
Optical
Transceiver,eSFP,1310nm,STM1,-5~0dBm,-37dBm,LC,SM,40km
Single
mode
Recommended
3406030
1
Optical
Transceiver,eSFP,1550nm,STM1,-5~0dBm,-37dBm,LC,SM,80km
Single
mode
Recommended
3406055
5
BiDi Transceiver,CSFP,1550(Tx) /
1310(Rx)nm,125~155Mbps,-14dBm,-8dBm,-28.2dBm,LC,SM,10km
Single
mode
Recommended
3406030
2
Optical
Transceiver,eSFP,1310nm,STM4,-15~-8dBm,-31dBm,LC,SM,15km
Single
mode
Recommended
3406030
3
Optical
Transceiver,eSFP,1310nm,STM4,-3~2dBm,-30dBm,LC,SM,40km
Single
mode
Recommended
3406030
4
Optical
Transceiver,eSFP,1550nm,STM4,-3~2dBm,-30dBm,LC,SM,80km
Single
mode
Recommended
3406028
6
Optical Transceiver,eSFP,850nm,2.125Gb/s(Multi
rate) ,-9.5~-2.5dBm,-17dBm,LC,MM,0.5km
Multi-m
ode
Recommended
3406021
9
Optical
transceiver,eSFP,1310nm,1.25Gb/s,-9.5~-3dBm,-20dBm,LC,SM,10k
m
Single
mode
Sales restricted
3406029
8
Optical
Transceiver,eSFP,1310nm,1.25Gb/s,-5~0dBm,-23dBm,LC,SM,40km
Single
mode
Recommended
3406006
9
Optical
Transceiver,SFP,1550nm,1.25Gb/s,1dBm,-4dBm,-21dBm,LC(-40~85)
,40km
Single
mode
Recommended
3406027
4
Optical
Transceiver,eSFP,1550nm,1.25Gb/s,-2~5dBm,-23dBm,LC,SM,80km
Single
mode
Sales restricted
3406029
5
Optical
Transceiver,eSFP,1550nm,1.25Gb/s,0~5dBm,-30dBm,LC,SM,100km
Single
mode
Recommended
3410008
0
3406047
3
Optical
transceiver,eSFP,1310nm,1.25Gb/s,-9~-3dBm,-20dBm,LC,Single
Mode,10km
Single
mode
Recommended
3406036
0
Optical
Transceiver,eSFP,1550nm,1.25Gb/s,-2~5dBm,-23dBm,LC,SM,80km
Single
mode
Recommended
3406035
1
Optical
transceiver,eSFP,1471nm,1.25Gb/s,5dBm,0dBm,-23dBm,LC,SM,70k
m
Single
mode
3406035
0
Optical
transceiver,eSFP,1491nm,1.25Gb/s,5dBm,0dBm,-23dBm,LC,SM,70k
m
Single
mode
3406031
5
Optical
transceiver,eSFP,1511nm,1.25Gb/s,5dBm,0dBm,-23dBm,LC,SM,70k
m
Single
mode
3406033
2
Optical
transceiver,eSFP,1531nm,1.25Gb/s,5dBm,0dBm,-23dBm,LC,SM,70k
m
Single
mode
3406034
6
Optical
transceiver,eSFP,1551nm,1.25Gb/s,5dBm,0dBm,-23dBm,LC,SM,70k
m
Single
mode
3406034
7
Optical
transceiver,eSFP,1571nm,1.25Gb/s,5dBm,0dBm,-23dBm,LC,SM,70k
m
Single
mode
3406034
8
Optical
transceiver,eSFP,1591nm,1.25Gb/s,5dBm,0dBm,-23dBm,LC,SM,70k
m
Single
mode
Recommended
3406034
9
Optical
transceiver,eSFP,1611nm,1.25Gb/s,5dBm,0dBm,-23dBm,LC,SM,70k
m
Single
mode
3410008
0
RJ45
Recommended
3406047
0
Optical
Transceiver,ESFP,Tx1310/Rx1490,1.25Gb/s,-3dBm,-9dBm,-19.5dBm
,LC,Single Mode,10km
Single
mode
It must be used
with the optical
module with the
BOM number
being
34060475.
3406047
5
Optical
Transceiver,ESFP,Tx1490/Rx1310,1.25Gb/s,-3dBm,-9dBm,-19.5dBm
,LC,Single Mode,10km
Single
mode
It must be used
with the optical
module with the
BOM number
being
34060470.
3406052
5
Single
mode
It must be used
with the optical
module with the
BOM number
34060470.
3406028
8
Optical
Transceiver,eSFP,1310nm,STM16,-10~-3dBm,-21dBm,LC,SM,2km
Single
mode
Recommended
3406027
8
Optical
Transceiver,eSFP,1310nm,STM16,-5~0dBm,-21dBm,LC,SM,15km
Single
mode
Recommended
3406028
9
Optical
Transceiver,eSFP,1310nm,STM16,-2~3dBm,-29dBm,LC,SM,40km
Single
mode
Recommended
3406027
9
Optical
Transceiver,eSFP,1550nm,STM16,-2~3dBm,-30dBm,LC,SM,80km
Single
mode
Sales restricted.
3406048
8
Optical
Transceiver,eSFP,1550nm,STM16,-2~3dBm,-30dBm,LC,SM,80km
Single
mode
Recommended
3406036
2
Optical
Transceiver,XFP,850nm,10.3Gb/s,-7.3dBm,-1.3dBm,-7.5dBm,LC,MM,
0.3km
Multimo
de
Applied to the
10 GBase LAN
only
3406031
3
Optical
Transceiver,XFP,1310nm,9.95~10.71Gb/s,-6dBm~-1dBm,-14.4dBm,L
C,SM,10km
Single
mode
Applied to the
10 G POS, 10
GBase LAN,
and 10 GBase
WAN
3406032
2
Optical Transceiver,XFP,1550nm,9.95Gb/s to
11.1Gb/s,+2dBm,-1dBm,-15dBm,LC,Single-mode,40km
Single
mode
Applied to the
10 G POS, 10
GBase LAN,
and 10 GBase
WAN
3406036
1
Optical transceiver,XFP,1550nm,9.95Gb/s to
11.1Gb/s,0~4dBm,-24dBm,LC,Single-mode,80km
Single
mode
Applied to the
10 G POS, 10
GBase LAN,
and 10 GBase
WAN
3406049
4
XFP|SFP+ Optical
transceiver,SFP+,850nm,10Gb/s,-7.3~-1dBm,-11.1dBm,LC,
MM,0.3km
Multi-m
ode
Can only be
used in the
10GBase LAN.
3406049
XFP|SFP+ Optical
Single
Can only be
transceiver,SFP+,1310nm,10Gb/s,-8.2~0.5dBm,-12.6dBm,LC,SM,10k
m
mode
used in the
10GBase LAN.
3406051
8
XFP|SFP+ Optical
transceiver,SFP+,1550nm,9.95~11.1Gb/s,-4.7~4dBm,-14.1dBm,LC,S
M,40km
Single
mode
Can be used in
the 10G POS,
10GBase LAN,
and 10GBase
WAN..
3406057
0
singlemode
Can only be
used in
10GBase-CFP
interfaces..
6 Combinet
Combinet An assembly cabinet is optional. According to customers'
SBOM Type
CR52-22-D
Description
NE80E,CR5B2N68E,2.
2m Router Assembly
Cabinet with Double
Swing Doors,N68E-22
Remarks
Applicable for NE40E-X3,
NE40E-X16, and NE40E-X8
Equal to or shorter
than 25 m
Description
Configuration Notes
25030101
Wire,450/750V,227 IEC
02(RV)25mm^2,Blue,110A
25030432
Wire,450/750V,227 IEC
02(RV),25mm^2,Black,110A
14170121
Naked Crimping
Each cable is equipped with one
connector,JG2,25mm^2,M8,150A,Si terminal of this type, which is
lver Plated
used to connect to the power
module.
14170060
Naked Crimping
Terminal,OT,25mm^2,M8,Tin
Length in Site
Survey
Longer than 25 m
and equal to or
shorter than 35 m
Longer than 35 m
Description
Configuration Notes
25030199
Wire,450/750V,227 IEC
02(RV),35mm^2,Blue,135A
25030420
Wire,450/750V,227 IEC
02(RV),35mm^2,Black,135A
14170128
Naked Crimping
Each cable is equipped with one
Connector,JG2,35mm^2,M8,210A,T terminal of this type, which is
in Plating,For OEM
used to connect to the power
module.
14170063
Naked Crimping
Terminal,OT,35mm^2,M8,Tin
Plating,Naked Ring Terminal
A power distribution frame or the first power cabinet of a row should be placed near the device.
Equal to or shorter
than 25 m
Longer than 25 m
and shorter than 35
m
Description
Configuration Notes
25030430
Wire,450/750V,227 IEC
02(RV),16mm^2,Blue,85A
25030428
Wire,450/750V,227 IEC
02(RV),16mm^2,Black,85A
14170020
Naked Crimping
Terminal,OT,16mm^2,M6,Tin
Plating,Naked Ring Terminal
14170024
Naked Crimping
Terminal,OT,16mm^2,M8,Tin
Plating,Naked Ring Terminal
25030101
Wire,450/750V,227 IEC
02(RV),25mm^2,Blue,110A
25030432
Wire,450/750V,227 IEC
02(RV),25mm^2,Black,110A
14170147
Naked Crimping
Terminal,OT,25mm^2,M6,Tin
Plating,Width Less Than
12.4mm,For OEM
14170060
Naked Crimping
Terminal,OT,25mm^2,M8,Tin
A power distribution frame or the first power cabinet of a row should be placed near the device.
Equal to or shorter
than 25 m
Longer than 25 m
and shorter than 35
m
Longer than 35 m
Description
Configuration Notes
25030430
Wire,450/750V,227 IEC
02(RV),16mm^2,Blue,85A
25030428
Wire,450/750V,227 IEC
02(RV),16mm^2,Black,85A
14170020
Naked Crimping
Terminal,OT,16mm^2,M6,Tin
Plating,Naked Ring Terminal
14170024
Naked Crimping
Terminal,OT,16mm^2,M8,Tin
Plating,Naked Ring Terminal
25030101
Wire,450/750V,227 IEC
02(RV),25mm^2,Blue,110A
25030432
Wire,450/750V,227 IEC
02(RV),25mm^2,Black,110A
14170147
Naked Crimping
Terminal,OT,25mm^2,M6,Tin
Plating,Width Less Than
12.4mm,For OEM
14170060
Naked Crimping
Terminal,OT,25mm^2,M8,Tin
Plating,Naked Ring Terminal
A power distribution frame or the first power cabinet of a row should be placed near the device.
Description
Configuration Notes
25030422
Power
Cable,300/500V,227IEC10(BVV),Black(Cores:
Blue,Brown,Yellow/Green),36A,3*6mm^2
14170013
14170017
Description
Configuration Notes
25030463
Power
Cable,300/500V,227IEC10(BVV),10mm^2,Black
Jacket(Cores:
Blue,Brown,Black,Yellow/Green),46A,4 Equivalent
Cores
04043396
02120415
14170146
14170016
14170098
Equal to or shorter
than 15 m
Description
Configuration Notes
25030430
Wire,450/750V,227 IEC
02(RV),16mm^2,Blue,85A
25030428
Wire,450/750V,227 IEC
02(RV),16mm^2,Black,85A
14170116
Naked Crimping
Each cable is equipped with one
Connector,JG2,16mm^2,M6,95A,T terminal of this type, which is used to
in Plated,for OEM
connect to the PEM.
14170024
Naked Crimping
Terminal,OT,16mm^2,M8,Tin
Plating,Naked Ring Terminal
Wire,450/750V,227 IEC
02(RV),25mm^2,Blue,110A
Longer than 15 m
25030101
and shorter than 35
m
Longer than 35 m
Description
Configuration Notes
25030432
Wire,450/750V,227 IEC
02(RV),25mm^2,Black,110A
14170119
Naked Crimping
Each cable is equipped with one
Connector,JG2,25mm^2,M6,150A, terminal of this type, which is used to
Tin Plating,For OEM
connect to the PEM.
14170060
Naked Crimping
Terminal,OT,25mm^2,M8,Tin
Plating,Naked Ring Terminal
A power distribution frame or the first power cabinet of a row should be placed near the device.
Description
External Suite, Power Cords All Over The World, Class I
Equipment With Connector C13,External Cable Set
Configuration Notes
Different cables are used in
different countries. Each AC
chassis is equipped with 2 pcs.
Rules for selecting the AC power cable for the NE40E-X3 are as follows:
1. AC power cables are selected according to local cable standards in the country
where the device is deployed.
2. The required length of the power cables is determined based on the length in the
site survey.
3. The following formulas are used to calculate the number of required power
cables:
Number of power cables of each type = 2 pcs x Number of devices
In the 100V/110V/120V AC power supply system, input of double live wires is
required. In this case, the input voltage ranges from 176 VAC to 275 VAC, and any two
phases can be input to the AC power module. In the external cable suite (04000104), the
C13-end of the three-core power cable has three terminals marked L, N, and PE. L
stands for live wire 1; N stands for live wire 1; PE stands for the ground wire. The other
end of the three-core power cable must be cut off for cable making. The terminal is
specified in the site survey.
In the 100V/110V/120V AC power supply system, if input of double live wires cannot be
provided, the NE40E-X3 AC chassis is not recommended.
Equal to or shorter
than 15 m
Longer than 15 m
and shorter than 25
m
Longer than 25 m
and shorter than 35
m
Longer than 35 m
Description
Configuration Notes
25030430
Wire,450/750V,227 IEC
02(RV),16mm^2,Blue,85A
25030428
Wire,450/750V,227 IEC
02(RV),16mm^2,Black,85A
14170024
Naked Crimping
Terminal,OT,16mm^2,M8,Tin
Plating,Naked Ring Terminal
14170116
Naked Crimping
Connector,JG2,16mm^2,M6,95A,Tin
Plated,for OEM
25030101
Wire,450/750V,227 IEC
02(RV),25mm^2,Blue,110A
25030432
Wire,450/750V,227 IEC
02(RV),25mm^2,Black,110A
14170060
Naked Crimping
Terminal,OT,25mm^2,M8,Tin
Plating,Naked Ring Terminal
14170119
Naked Crimping
Connector,JG2,25mm^2,M6,150A,Tin
Plating,For OEM
25030199
Wire,450/750V,227 IEC
02(RV),35mm^2,Blue,110A
25030420
Wire,450/750V,227 IEC
02(RV),35mm^2,Black,110A
14170159
Naked Crimping
Each cable is equipped with one
Connector,JG2,34.3mm^2,M6(1/4"),13 terminal of this type, which is used
4A,Tin Plated,2AWG,Hole Center
to connect to the PEM.
Distance 15.875mm(5/8"),Short
Tube,for North American
14170063
Naked Crimping
Terminal,OT,35mm^2,M8,Tin
Plating,Naked Ring Terminal
A power distribution frame or the first power cabinet of a row should be placed near the device.
Configuration Notes
25030430
Wire,450/750V,227 IEC
02(RV),16mm^2,Blue,85A
25030428
Wire,450/750V,227 IEC
02(RV),16mm^2,Black,85A
14170116
Naked Crimping
Each cable is equipped with two
Terminal,JG2,16mm^2,M6,95A, terminals of this type, which are used to
Tin Plated,for OEM
connect the PEM and AC-DC converter.
04080076
Description
25030461
Power
Each AC chassis is equipped with
Cable,300/500V,227IEC10(BVV),6 four cables of this type.
mm^2,Black
Jacket(Cores:Blue,Brown),43A,2
Equivalent Cores
14170023
Naked Crimping
Terminal,OT,6mm^2,M6,Tin
Plating,Insulated Ring
Terminal,12~10AWG,yellow
14170013
Naked Crimping
Terminal,OT,6mm^2,M8,Tin
Plating,Insulated Ring
Terminal,12~10AWG,yellow
An AC power distribution frame or the first power cabinet of a row should be placed near the
device.
Equal to or shorter
than 15 m
Configuration Notes
25030430
Wire,450/750V,227 IEC
02(RV),16mm^2,Blue,85A
25030428
Wire,450/750V,227 IEC
02(RV),16mm^2,Black,85A
14170024
Naked Crimping
Terminal,OT,16mm^2,M8,Tin
Plating,Naked Ring Terminal
14170116
Naked Crimping
Each cable is equipped with one terminal
Terminal,JG2,16mm^2,M6,95A,T of this type, which is used to connect to
in Plated,for OEM
the PEM.
Longer than 15 m
25030101
and shorter than 35
m
Wire,450/750V,227 IEC
02(RV),25mm^2,Blue,110A
25030432
Wire,450/750V,227 IEC
02(RV),25mm^2,Black,110A
14170060
Naked Crimping
Terminal,OT,25mm^2,M8,Tin
Plating,Naked Ring Terminal
14170119
Naked Crimping
Connector,JG2,25mm^2,M6,150
A,Tin Plating,For OEM
Wire,450/750V,227 IEC
02(RV),35mm^2,Blue,135A
25030420
Wire,450/750V,227 IEC
02(RV),35mm^2,Black,135A
14170159
Naked Crimping
Connector,JG2,34.3mm^2,M6(1/
4"),134A,Tin Plated,2AWG,Hole
Center Distance
15.875mm(5/8"),Short Tube,for
North American
14170063
Naked Crimping
Terminal,OT,35mm^2,M8,Tin
Plating,Naked Ring Terminal
Longer than 25 m
25030199
and shorter than 35
m
Longer than 35 m
Description
A power distribution frame or the first power cabinet of a row should be placed near the device.
Description
Wire,450/750V,227 IEC
Configuration Notes
Each DC chassis is equipped with
Description
Configuration Notes
02(RV),16mm^2,Blue,85A
25030428
Wire,450/750V,227 IEC
02(RV),16mm^2,Black,85A
14170116
Naked Crimping
Each cable is equipped with two
Terminal,JG2,16mm^2,M6,95A, terminals of this type, which are used
Tin Plated,for OEM
to connect the PEM and AC-DC
converter.
04080076
Power
Cable,300/500V,227IEC10(BVV),6
mm^2,Black
Jacket(Cores:Blue,Brown),43A,2
Equivalent Cores
14170023
Naked Crimping
Terminal,OT,6mm^2,M6,Tin
Plating,Insulated Ring
Terminal,12~10AWG,yellow
14170013
Naked Crimping
Terminal,OT,6mm^2,M8,Tin
Plating,Insulated Ring
Terminal,12~10AWG,yellow
The distance between the An AC power distribution frame or the first power cabinet of a row should be placed near the
AC-DC converter and the device.
AC power distribution
frame is longer than 50
m.
BOM Number
25030431
Description
Wire,450/750V,60227 IEC
02(RV)25mm^2,yellow green,110A
Configuration Notes
Each device is equipped with one such power cable. The
length of the power cable is based on the site survey
result. If the device is grounded through a cabinet, the
BOM Number
Description
Configuration Notes
length of the ground cable is a1 shown in
; if the device is grounded through a chassis, the
length of the ground cable is a3 shown in
.
14170119
Naked Crimping
Connector,JG2,25mm^2,M6,150A,Tin
Plating,For OEM
14170060
Naked Crimping
Terminal,OT,25mm^2,M8,Tin
Plating,Naked Ring Terminal
Description
Configuration Notes
25030431
Wire,450/750V,60227 IEC
02(RV)25mm^2,yellow green,110A
14170119
Naked Crimping
Connector,JG2,25mm^2,M6,150A,Tin
Plating,For OEM
14170060
Naked Crimping
Terminal,OT,25mm^2,M8,Tin
Plating,Naked Ring Terminal
Description
Wire,450/750V,60227 IEC
02(RV)25mm^2,yellow green,110A
Configuration Notes
Each device is equipped with one such power cable.
The length of the power cable is based on the site
survey result. If the device is grounded through a
cabinet, the length of the ground cable is a1 shown in
Naked Crimping
One such terminal is used to connect to the ground
Connector,JG2,25mm^2,M6,150A,Tin terminal on the chassis.
Plating,For OEM
14170060
Naked Crimping
Terminal,OT,25mm^2,M8,Tin
Plating,Naked Ring Terminal
No.
1
BOM Number
04022629
Description
Length
Trunk
20 m
Cable,20.00m,75ohm,2.2mm,SMB
75SF-V,SYFVZ75-1.2/0.25,HONE
T,DL2526
Cable Type
Cable with one
SMB connector
which is used to
connect to the
MPU/SRU. The
connector on the
other end of the
cable must be
provided by the
customer.
04060205
Trunk
30 m
Cable,30.00m,75ohm,2.2mm,SMB
75SF-V,SYFVZ75-1.2/0.25,Wirele
ss Intelligent Network
04023971
Trunk
40 m
Cable,40.00m,75ohm,2.2mm,SMB
75SF-V,SYFVZ75-1.2/0.25,C&C0
8B,DL3133
04023972
Trunk
50 m
Cable,50.00m,75ohm,2.2mm,SMB
75SF-V,SYFVZ75-1.2/0.25,C&C0
8B,DL3134
04060171
Trunk Cable,155M
5m
Self-Loop,5m,75ohm,4.0mm,SMB
75SF-IV,SYV75-2/0.34(S),SMB75
SF-IV,OptiX
04040497
Trunk
3m
Cable,3m,120ohm,1E1,0.4mm,MP
8-II,120CC4P0.4P430U(S),MP8-II,
Expert 2.0
04040261
Trunk
15 m
Cable,15m,120ohm,1E1,0.4mm,M
P8-II,120CC4P0.4P430U(S),MP8II
04040496
Trunk
30 m
Cable,30m,120ohm,1E1,0.4mm,M
P8-II,120CC4P0.4P430U(S),MP8II,Expert 2.0
04040494
Trunk
Cable,60.00m,120ohm,1E1,0.4m
m,MP8-II,120CC4P0.4P430U(S),
60 m
Configuration Notes
These cables are not
supported on the
CR52MPUD.
Each
CR52MPUA0/CR52SR
UA0/CR52MPUB0/CR
52SRUA1 can have 0
to 4 pcs.
Each
CR52MPUB2/CR52SR
UA3/CR56MPUB4/CR
57SRU40A4 can have
0 to 2 pcs.
Each
CR52MPUD/CR52MP
UB2/CR52SRUA3/CR5
6MPUB4/CR57SRU40
A4 can have 0 to 2 pcs.
These cables are not
supported on the
CR52MPUA0/CR52SR
UA0/CR52MPUB0/CR
52SRUA1.
No.
BOM Number
Description
Length
Cable Type
Configuration Notes
MP8-II,Expert 2.0
10
04040493
Trunk
80 m
Cable,80m,120ohm,1E1,0.4mm,M
P8-II,120CC4P0.4P430U(S),MP8II,Expert 2.0
11
14080082
2 pcs
12
25050014
Twisted-Pair
Cable,100ohm,Category 5e
UTP,0.51mm,24AWG,8Cores,PA
NTONE 430U,Use with
Plug:14080082
Based on
the site
survey
result
Balanced cable
BOM Number
Description
Configuration Notes
02351606
02351607
02351608
NetEngine80E,CR5Z1DCSF,24*E1
DB100 to SMB Port Conversion Box
04070064
If coaxial cables with SMB connectors are used, the conversion box
02351608 must be selected. If twisted pair cables with RJ48 connectors are used,
the conversion box 02351606 or 02351607 must be selected. When the interface
on the CFE1 board needs to be connected to the E1 interface on another device,
you need to take the matching between cable impedances into consideration
when selecting a cable.
1.
When the remote interface uses the balanced 120-ohm twisted cable and
RJ48 connector, select the E1 trunk cable from Table 8-26 based on the site
survey length. The listed cables are with RJ48 connectors at both ends.
E1 trunk cable list (RJ48 interface)
No.
BOM Number
Description
Quantity
Unit
04040497
Trunk
One for each E1
Cable,3m,120ohm,1E1,0.4mm,MP8-II,120CC4P0.4P4 interface
30U(S),MP8-II,Expert 2.0
pcs
04040261
Trunk
One for each E1
Cable,15m,120ohm,1E1,0.4mm,MP8-II,120CC4P0.4P interface
430U(S),MP8-II
pcs
04040496
Trunk
One for each E1
Cable,30m,120ohm,1E1,0.4mm,MP8-II,120CC4P0.4P interface
430U(S),MP8-II,Expert 2.0
pcs
04040494
Trunk
One for each E1
Cable,60.00m,120ohm,1E1,0.4mm,MP8-II,120CC4P0. interface
4P430U(S),MP8-II,Expert 2.0
pcs
04040493
Trunk
One for each E1
Cable,80m,120ohm,1E1,0.4mm,MP8-II,120CC4P0.4P interface
430U(S),MP8-II,Expert 2.0
pcs
BOM Number
Description
Quantity
Unit
04026814
pcs
04022627
Trunk
2
Cable,10.00m,75ohm,2.2mm,SMB75SF-V,SYFVZ751.2/0.25,HONET,W2524
pcs
04022629
Trunk
2
Cable,20.00m,75ohm,2.2mm,SMB75SF-V,SYFVZ751.2/0.25,HONET,DL2526
pcs
04060205
Trunk
2
Cable,30.00m,75ohm,2.2mm,SMB75SF-V,SYFVZ751.2/0.25,Wireless Intelligent Network
pcs
04023971
Trunk
2
Cable,40.00m,75ohm,2.2mm,SMB75SF-V,SYFVZ751.2/0.25,C&C08B,DL3133
pcs
04023972
Trunk
2
Cable,50.00m,75ohm,2.2mm,SMB75SF-V,SYFVZ751.2/0.25,C&C08B,DL3134
pcs
04043079
Trunk
2
Cable,65.00m,75ohm,2.2mm,SMB75SF-V,SYFVZ751.2/0.25
pcs
No.
BOM Number
Description
Quantity
Unit
04042130
Trunk
2
Cable,70m,75ohm,2.2mm,SMB75SF-V,SYFVZ75-1.2
/0.25
pcs
04042131
Trunk
2
Cable,80m,75ohm,2.2mm,SMB75SF-V,SYFVZ75-1.2
/0.25
pcs
10
04042132
Trunk
2
Cable,90m,75ohm,2.2mm,SMB75SF-V,SYFVZ75-1.2
/0.25
pcs
11
04043080
Trunk
Cable,100.00m,75ohm,2.2mm,SMB75SF-V,SYFVZ7
5-1.2/0.25
pcs
12
04060171
Trunk Cable,155M
Self-Loop,5m,75ohm,4.0mm,SMB75SF-IV,SYV75-2/
0.34(S),SMB75SF-IV,OptiX
pcs
No.
BOM Number
Description
Quantity
Unit
04060171
Trunk Cable,155M
2
Self-Loop,5m,75ohm,4.0mm,SMB75SF-IV,SYV75-2/0.34(
S),SMB75SF-IV,OptiX
pcs
04044335
Trunk
2
Cable,155M/Clock/Lightning,10m,75ohm,3.9mm,SMB75S
F-IV,SYV75-2/0.34(S)
pcs
04044336
Trunk
2
Cable,155M/Clock/Lightning,20m,75ohm,3.9mm,SMB75S
F-IV,SYV75-2/0.34(S)
pcs
04044337
Trunk
2
Cable,155M/Clock/Lightning,30m,75ohm,3.9mm,SMB75S
F-IV,SYV75-2/0.34(S)
pcs
BOM Number
Description
14130296
Patch Cord,LC/PC-LC/PC,Multimode,A1b,2mm,5m
14130222
Patch Cord,LC/PC-LC/PC,Multimode,2mm,10m
14130295
Patch Cord,LC/PC-LC/PC,Multimode,2mm,20m
14130195
Patch Cord,LC/PC-LC/PC,Singlemode,2mm,5m
Quantity
The type and the
number of fibers
depend on the site
survey result.
Unit
pcs
pcs
pcs
pcs
14130199
Patch Cord,LC/PC-LC/PC,Singlemode,2mm,10m
pcs
14130251
Patch Cord,LC/PC-LC/PC,Singlemode,2mm,20m
pcs
14130248
Adapter,LC/PC-LC/PC,2,Blue,Shell:Plastic,Sleeve:Zirco
nia,Square
pcs
14130197
Patch Cord,FC/PC,LC/PC,Singlemode,2mm,10m
pcs
14130221
Patch Cord,FC/PC,LC/PC,Multimode,2mm,10m
pcs
10
14130196
Patch Cord,LC/PC-SC/PC,Singlemode,2mm,10m
pcs
11
14130223
Patch Cord,LC/PC-SC/PC,Multimode,2mm,10m
pcs
12
14130375
pcs
13
14130335
Optic Fiber
Connector,LC/PC,LC/PC,Multi-mode,2mm,1m
pcs
9 Accessories
List and configuration description of accessories of the NE40E-X16
No.
0
Code
21100144
Description
Nonmetal Parts,DKBA0.480.0457-GT-300I- Wire
Clip-300*3.6mm-Strength 18.2kg
Configuration Notes
Each NE40E-X16 is configured
with 200 pcs.
It is not required on the NE80E.
21100015
It is mandatory. Each
NE80E/NE40E-X16 is configured
with 100 pcs.
21100041
It is mandatory. Each
NE80E/NE40E-X16 is configured
with 100 pcs.
28010026
14080082
25050014
Twisted-Pair Cable,100ohm,Category 5e
UTP,0.51mm,24AWG,8Cores,PANTONE 430U,Used
with Plug:14080082
29041060
29042491
DKBA4.150.0999MX,Cabinet
LOGO,Router,90mm*30mm,Plastic
No.
Code
Description
Configuration Notes
02234474
It is mandatory. Each
NE80E/NE40E-X16 is configured
with 1 pcs.
21500093
10
26010552
11
31185644
12
31185645
13
31185648
14
31185649
15
02400376
Power Distribution
Cabinet,220V,50/60HZ,72000mA,None,EPS200-4850
A
It is quoted separately. It is
mandatory when an NE40E-X16
with the AC power supply is
delivered. Each NE40E-X16 is
configured with 2 pcs.
16
02130872
Power
It is quoted separately. It is
module--33degC-65degC-90VAC-290VAC-(-53.5)VDC mandatory when an
NE80E/NE40E-X16 with the AC
No.
Code
Description
Configuration Notes
/54.2A-AC/DC rectifier
17
21240150
It is mandatory when an
NE40E-X16 with two AC power
supply cabinets is to be delivered.
Each NE40E-X16 is configured
with 4 pcs, with each AC power
supply cabinet configured with
with 2 pcs.
18
02120415
It is quoted separately. It is
mandatory when an NE80E with
the AC power supply is delivered.
Each NE80E is configured with 1
pcs.
19
05116036
NetEngine40E&80E-4/8/16,
It is provided for the NE40E-8,
NetEngine40E&80E-4/8/16_C V600R005C00,Physical NE40E-4, or NE80E to be
Software Package,DVD China
delivered outside China. Each
NE40E-8, NE40E-4, or NE80E is
NetEngine40E&80E-4/8/16,
NetEngine40E&80E-4/8/16_O V600R005C00,Physical configured with 1 pcs. By default,
it is not provided.
Software Package,DVD Oversea
05116037
20
05116038
05116039
NetEngine40E-X8/X16,NetEngine40E-X8/X16_C
V600R005C00,Physical Software Package, DVD
China
NetEngine40E-X8/X16,NetEngine40E-X8/X16_O
V600R005C00,Physical Software Package, DVD
Oversea
21
28040011
22
28040009
23
28040013
25
02120641
26
21240446
DKBA61533919,X8 Mount_19inch,NE40E
21240447
DKBA61532828,X8 Mount_23inch,NE40E
No.
Code
Description
Configuration Notes
21100144
21100015
21100041
14080082
25050014
Twisted-Pair Cable,100ohm,Category 5e
UTP,0.51mm,24AWG,8Cores,PANTONE 430U,Use
with Plug:14080082
28010026
29041060
29042491
DKBA4.150.0999MX,Cabinet
LOGO,Router,90mm*30mm,Plastic
31185644
31185645
10
02234474
11
21500093
12
26010552
13
02400376
Power Distribution
It is quoted separately. It is
Cabinet,220V,50/60HZ,72000mA,None,EPS200-485 mandatory on an NE40E-X8 with
No.
Code
Description
0A
Configuration Notes
the AC power supply. Each
NE40E-X8 is configured with 1 pcs.
14
02130872
Power
It is quoted separately. It is
module--33degC-65degC-90VAC-290VAC-(-53.5)VD mandatory on an NE40E-X8 with
C/54.2A-AC/DC rectifier
the AC power supply. Each
NE40E-X8 is configured with 4 pcs.
It is not provided for other cabinets.
15
21240150
16
05116036
NetEngine40E&80E-4/8/16,
NetEngine40E&80E-4/8/16_C
V600R005C00,Physical Software Package,DVD
China
05116037
NetEngine40E&80E-4/8/16,
NetEngine40E&80E-4/8/16_O
V600R005C00,Physical Software Package,DVD
Oversea
05116038
05116039
NetEngine40E-X8/X16,NetEngine40E-X8/X16_C
V600R005C00,Physical Software Package, DVD
China
NetEngine40E-X8/X16,NetEngine40E-X8/X16_O
V600R005C00,Physical Software Package, DVD
Oversea
05116040
05116041
NetEngine40E-X3,NetEngine40E-X3_C
V600R005C00,Physical Software Package,DVD
China
It is applicable to the
NE40E-X8/-X16 and sold based on
versions. By default, it is not
delivered with the router.
NetEngine40E-X3,NetEngine40E-X3_O
V600R005C00,Physical Software Package,DVD
Oversea
19
21500182
DKBA4.150.0747MX,Mount Angle,NE20-4(3U)
Chassis of NGN
It is mandatory. Each 20 U
NE40E-8 (02351014) is configured
with 1 pcs.
20
21500200
DKBA4.150.0546MX,Mount Angle
Component,NE40E
It is mandatory. Each 22 U
NE40E-8 (02350762) is configured
with 1 pcs.
21
21240160
DKBA4.150.0923MX,Mount,NE40E-4
22
28040011
23
28040009
24
28040013
25
02120641
Power Distribution
Box,NE40E,DPD300-4-12,Dual-two Inputs .Dual-six
outputs ,High Power DC Distribution Box,per output
80A
No.
Code
Description
Configuration Notes
NE40E/80E-X8/-8s.
26
27
28
21240442
DKBA61532830,X3(DC) Mount_19inch,NE40E
21240443
DKBA61532826,X3(DC) Mount_23inch,NE40E
21240444
DKBA61532831,X3(AC) Mount_19inch,NE40E
21240445
DKBA61532827,X3(AC)Mount_23inch,NE40E
21240446
DKBA61533919,X8 Mount_19inch,NE40E
21240447
DKBA61532828,X8 Mount_23inch,NE40E
Code of an
Insulated
Heat Shrink
Tube
Length of an Insulated
Shrink Tube (cm)
Heat
NE40E-X16
NE40E-X8
NE40E-X3
16mm2
28040011
150
100
50
25mm2
28040009
150
100
50
35mm2
28040013
150
100