Professional Documents
Culture Documents
HIS Osborne Reynolds Demonstration (Model: FM 11) has been designed for students experiment on the laminar, transition and turbulent flow. It consists of a transparent header tank and a flow visualisation pipe. The header tank is provided with a diffuser and stilling materials at the bottom to provide a constant head of water to be discharged through a bellmouth entry to the flow visualisation pipe. Flow through this pipe is regulated using a control valve at the discharge end. The water flow rate through the pipe can be measured using the volumetric tank (or measuring cylinder) of a Hydraulics Bench. Velocity of the water can therefore be determined to allow for the calculation of Reynolds number. A dye injection system is installed on top of the header tank so that flow pattern in the pipe can be visualised.
EXPERIMENTAL CAPABILITIES Reproducing the classic experiments by Professor Osborne Reynolds on fluid flow conditions. Visualisation of the laminar, transitional, turbulent flow and velocity profile.
SPECIFICATIONS Test Pipe Dye Reservoir Measuring Cup : 10 mm (ID) x 700 mm (L) : 500 ml : 2 liter
SOLDAS - Supervisory Control & Data Acquisition - Data Logging - Signal Analysis - Process Control - Real-Time Display - Tabulated Results - Graph of Experiment Results
SOLCAL - Computer Aided Learning - Multimedia Features - Interactive - Graphic Simulation - Samples of Experiment Result - Full Experiment Manuals
AGENT:
Company