Professional Documents
Culture Documents
(MARKETING DIVISION)
ANDHRA PRADESH STATE OFFICE PRICE SCHEDULE DESCRIPTION OF WORKS : INSTALLATION OF 5/10/15/20/50/70KL TANK, DISPENSING UNITS, PIPELINES, OTHER CIVIL / MECHANICAL / ELECTRICAL / MAINTENANCE WORKS.
Sl. No. I 1
DESCRIPTION
Unit
Rate (Rs.)
2 2 3 4 a) b) 3
SITE CLEARANCE Clearing the site of all weeds, shrubs, bushes, grass and growth of any SQM other vegetation including uprooting trees and saplings of girth upto 30 cms, measured at a height of 1 m above ground level and other obstructions etc. complete and disposing off the materials to an unobjectionable location irrespective of any lead and lift including filling the pits/hollows formed by removing the weeds, shrubs, etc. with approved selected earth, rolling the surface with hand roller, etc. as directed by IOCL. Felling of trees of girth measured at a height of 1 m above ground level including cutting of trunks and branches, removing the roots and disposal of all materials and filling and compacting of earth. Beyond 30 cm girth and upto 60 cm girth EACH Beyond 60 cm girth and upto 120 cm girth EACH Removing the roots by excavation of an already cut tree in the site upto EACH a maximum girth 120cm and backfilling and compacting of the pit all complete as directed by Engineer-in-charge. EARTHWORK EXCAVATION Excavation for foundations, substructures, etc. to the following depths below existing ground level, in all types of ordinary and hard soils including hard murum, de-watering the excavated pits necessary shoring, strutting, including backfilling sides of foundation with selected excavated material, stacking earth for back filling and/or disposing excess excavated material outside the premises of IOCL at an unobjectionable place irrespective of lead etc complete (Excavation /removal of rubble fill shall also be covered under this item. The rate shall include dewatering of the excavated area till completion of all works upto ground level). Upto 1.5 m CUM Above 1.5 upto 3.0 m Above 3.0 upto 4.5 m Above 4.5 upto 6.0 m CUM CUM CUM
74 320 178
Seventy Four only Three Hundred and Twenty only One Hundred and Seventy Eight only
II 4
5 6 7 8
a) b) c) d) 5
One Hundred and Twenty Five only One Hundred and Forty Two only One Hundred and Fifty Nine only One Hundred and Seventy Six only
9 10 11
a) b) c) 6
Excavation for foundations, substructures, etc. to the following depths below existing ground level, in soft rock and laterite rock, de-watering the excavated pits, including disposing excess excavated material outside the premises of IOCL at an unobjectionable place irrespective of lead etc complete (The rate shall include dewatering of the excavated area till completion of all works upto ground level) Upto 1.5 m CUM Above 1.5 upto 3.0 m Above 3.0 upto 4.5 m Excavation for foundations, substructures, etc. to the following depths below existing ground level, in hard rock by chiselling/pneumatic drilling, de-watering the excavated pits, including disposing excess excavated material outside the premises of IOCL at an unobjectionable place irrespective of lead etc complete (The rate shall include dewatering of the excavated area till completion of all works upto ground level) Upto 1.5 m CUM CUM CUM
Two Hundred and Fifty Three only Two Hundred and Eighty Three only Three Hundred and Thirteen only
12
a)
560
ITEM CODE
Sl. No. b) c) 7 Above 1.5 upto 3.0 m Above 3.0 upto 4.5 m
DESCRIPTION
RATES IN WORDS (RUPEES) Five Hundred and Ninety only Six Hundred and Twenty only
13 14
15 16 17
a) b) c) 8
Excavation for foundations, substructures, etc. to the following depths below existing ground level, in hard rock by controlled blasting, dewatering the excavated pits, including disposing excess excavated material outside the premises of IOCL at an unobjectionable place irrespective of lead etc complete (The rate shall include dewatering of the excavated area till completion of all works upto ground level) Upto 1.5 m CUM Above 1.5 upto 3.0 m Above 3.0 upto 4.5 m CUM CUM
Three Hundred and fifty Eight only Three Hundred and Eighty Eight only Four Hundred and Eighteen only
18 19 20
a) b) c) 9
Supply, filling, spreading and compacting after sprinkling required quantity of water using 8 to 10 ton roller to 95% of maximum dry density in layers not exceeding 200 mm compacted thickness as per the enclosed detailed specifications. Imported approved quality murram CUM Excavated earth Selected imported earth CUM CUM
290 46 229
Two Hundred and Ninety only Forty Six only Two Hundred and Twenty Nine only
21 22 23 24 25
a) b) c) d) 10
Filling in plinth or where directed including supply and transporting, spreading thoroughly compacted in layers not exceeding 200 mm in depth complete with selected excavated earth CUM with selected imported earth CUM with clean coarse river sand with manufactured sand CUM CUM
III 11
26 27 28
a)
Mass mechanicalexcavation for Land development, excavated earth CUM comprising of all kinds of soft and loose soil, murram, kankar, gravel, soft rock, shrubs, grass etc., excluding hard rock, including filling at site if necessary / stacking serviceable materials / disposing the surplus excavated materials within / outside IOCL premises to an unobjectionable location irrespective of any lead & lift, as directed by IOCL. The excavation shall be termed as mass excavation if and only if the quantity of excavation is minimum 100.00 CUM. (Measurement will be only for the quantity of cutting) CONCRETE AND ALLIED WORKS Providing and laying of plain cement concrete (PCC) of specified grade conforming to latest IS 456 for all works in foundation, plinth & superstructure. Item includes cost of all materials, mixing, pouring in position, compaction, formwork, curing, finishing etc complete as specified in detailed description. Plain Cement Concrete 1:4:8 using 40mm nominal size aggregates CUM
Forty only Two Hundred and Twenty Three only Six Hundred and Seventy One only Six Hundred and Thirteen only One Hundred and Twenty Three only
2,157
b)
CUM
2,418
c)
CUM
3,132
Two Thousand One Hundred and Fifty Seven only Two Thousand Four Hundred and Eighteen only Three Thousand One Hundred and Thirty Two only
12
i 29 a)
Providing and laying of reinforced cement concrete (RCC) of specified grade conforming to latest IS 456 Item includes cost of all materials excluding steel reinforcement, mixing, pouring in position, compaction, formwork, scaffolding, curing, finishing etc complete as specified in detailed description. In foundations plinth, beams, columns, pedestals, walls, pilecaps etc upto plinth level Concrete of nominal mix 1:1.5:3 CUM
3,876
ITEM CODE
Sl. No. ii
DESCRIPTION In lintels, shelves, balconies, beams, sunshades, wall, column, roof slab, staircase, fins, facia etc- above plinth level. Concrete of nominal mix 1:1.5:3
Unit
Rate (Rs.)
30
a)
CUM
4,936
13
i 31 a)
Providing and laying of reinforced cement concrete (RCC) of specified grade conforming to latest IS 456 using RMC. Item includes cost of all materials excluding steel reinforcement, mixing, pumping / pouring in position, compaction, formwork, scaffolding, curing, finishing etc complete as specified in detailed description. In foundations plinth, beams, columns, pedestals, walls, pilecaps etc upto plinth level RMC of mix M 20 from approved source CUM
4,590
ii 32 a)
In lintels, shelves, balconies, beams, sunshades, wall, column, roof slab, staircase, fins, facia etc- above plinth level. RMC of mix M 20 from approved source CUM
5,614
33 34 35
14 a) i ii iii
UNDER REAMED PILES Providing RCC 1:1:3 excluding steel reinforcement for under reamed piles with single bulb upto 6m deep as per IS 2911 etc. complete as per RM 300mm dia 400mm dia 450mm dia RM RM
Four Hundred and Ninety One only Nine Hundred and Nine only One Thousand One Hundred and Sixty Two only
b)
36 37 38
i ii iii c)
Providing RCC 1:1:3 excluding steel reinforcement for under reamed piles with single bulb beyond 6m deep as per IS 2911 etc. complete as per the approved drawings 300mm dia RM 400mm dia 450mm dia RM RM
Four Hundred and Forty only Seven Hundred and Sixty only Nine Hundred and Fifty Five only
39 40 41
i ii iii
Extra cost for providing additional RCC bulb for under reamed piles including all charges as per direction of IOCL for following sizes of piles as per the approved drawings 300mm dia EACH 400mm dia 450mm dia EACH EACH
Five Hundred and sixty Nine only Nine Hundred and Sixteen only One Thousand One Hundred and Twenty Three only Three Thousand Nine Hundred and Fifteen only
42
15 a)
43
b)
44
16
PRE-CAST CONCRETE WORKS Providing, placing and fixing in position PCC / RCC Pre-cast slab units CUM in nominal mix of 1:1.5:3 with 20mm downgraded coarse aggregate, as per approved drawings, including suitable form-work to provide smooth finish and thickness as specified in the drawings, etc complete. (Reinforcement shall be measured & paid separately). Making and fixing RCC pre-cast concrete kerbing blocks in varying CUM lengths to suite site conditions out of concrete mix 1:2:4 of desired shape and size with chamfers and recessed edges as per drawings including fixing them in position with C.M. 1:3, after excavating required depth from the ground and consolidating the base, providing PCC1:4:8, including necessary earthwork, PCC 1:4:8, reinforcement, plastering etc., complete as per standard drawings and as directed. (Ref. Drawing No. IOC/CAPEX/153) Making coping for the top of compound wall in plain cement concrete RM Mix 1:2:4 upto 75mm thick, including cost of all materials, shuttering, labour scaffolding etc. and finishing with 12mm thick plastering in CM 1:4 as per standard drawings. (Ref. Drawing No. IOC/FEATS/CAPEX/831)
3,915
3,649
192
ITEM CODE
Sl. No. 17
DESCRIPTION
Unit
45
Providing and laying PCC screed of average thickness 50 mm in 1:2:4 SQM mix with 12 mm downgraded size coarse aggregate including laying to slope, curing, finishing top surface to receive waterproofing treatment or as shown on drawings or directed, rounding at edges etc. complete including form-work & shuttering. REINFORCEMENT Providing, bending, laying, binding & fixing in position reinforcement steel of approved make, including supplying & providing soft annealed wire used for binding at all levels and locations for RCC work with all leads & lifts TMT bars / High Yield Strength deformed bars conforming to IS 1786 KG
18
46
a) IV 19
59
47 48 49
a)
b)
BRICK MASONRY Brickwork with locally available good quality brick masonry with bricks having minimum crushing strength of 35 kg/cm2 including scaffolding, curing, etc. for walls, parapets, etc. below and above plinth at all levels,joints/wall surface prepared either for pointing or plastering complete, as per the enclosed detailed specifications, drawings or as directed by IOCL Half brick masonry (115mm thick or nearest available size) in cement SQM mortar 1:4 with hoop iron comprising of 2 Nos. 6mm dia. round bars after every fourth course Full brick masonry (230mm thick or nearest available size) in cement CUM mortar 1:5 in foundation upto plinth level. Full brick masonry (230mm thick or nearest available size) in cement CUM mortar 1:5 in superstructure Supplying and laying brick pitching (on edge) with bricks having minimum crushing strength of 35 kg/cm2 over a layer of sand for levelling, including filling the interstices with cement mortar 1:3, packing the bricks properly etc. complete. 70mm thick SQM STONE MASONRY Providing Stone masonry with hard stone below and above plinth at all levels including scaffolding, dressing of stones, packing interstices, levelling, curing etc. complete Random Rubble Masonry in CM 1:6 CUM
402
Four Hundred and Two only Two Thousand Six Hundred and Seventy Nine only Two Thousand Seven Hundred and Ninety Nine only
2,679
c)
2,799
20
50
a) V 21
212
51 52
a)
1,434
22
Providing size stone masonry (first sort) in CM 1:6 with hard stone, in CUM foundation, plinth and superstructure including scaffolding and all lead and lifts. Providing Dry stone rubble packing of required compacted thickness with hard stones set in regular lines, interstices thoroughly filled & compacted with small chips / stone grit or any other approved filler material or as directed by IOCL. 230 mm. thk. SQM Providing dry stone pitching 225 mm thick laid in courses and required SQM profile with hammer dressed stones having no side less than 150 mm, with minimum depth 200 mm including preparing bedding surface, pointing with CM 1:3 mix, all lead and lifts, etc. complete. Providing laying hard core layer with 80 mm and down size well graded CUM hard broken stone including packing and filling voids with sand by flooding in foundations.
1,899
One Thousand Four Hundred and Thirty Four only One Thousand Eight Hundred and Ninety Nine only
23
53 54
a) 24
215 266
Two Hundred and Fifteen only Two Hundred and Sixty Six only
55
25
1,142
ITEM CODE
Sl. No. VI 26
DESCRIPTION
Unit
RATES IN WORDS (RUPEES) Two Thousand Six Hundred and Sixteen only
56
57
VII 27
58
VIII 28
IX 29
59
a)
CONCRETE BLOCK MASONRY Providing solid concrete block masonry in cement mortar 1:6 including CUM scaffolding, curing, etc. for walls, parapets, etc. above plinth at all levels, joints / wall surface prepared either for fair face finish or plastering and including providing concrete, reinforcement and shuttering (where required) at all door and window jambs, openings etc. complete as per enclosed specifications. (R.C.C runners, mullions and transoms shall be measured and paid for separately under concrete, reinforcement and shuttering items): ANTI-TERMITE TREATMENT Providing and injecting chemical emulsion for pre-constructional anti- SQM termite treatment and creating a chemical barrier as per IS 6313 (Part II) for walls, trenches, foundation, top surface of plinth filling, foundation of walls, floor, along exterior perimeter of building etc. complete, conforming to manufacturers specifications & as directed by IOCL using Chloropyriphos Emulsifiable 20 % concentration (The actual plinth area shall be measured for payment). DAMP PROOF COURSE Providing & laying 40 mm thick damp proof coarse in plain cement M2 concrete mix 1:2:4 using 20mm downgraded coarse aggregate including providing and mixing water proofing material 'Impermo' or equivalent @ 1Kg per 50Kg of cement and applying bitumen coating of 80/100 grade using 1.7 kg/Sq.m. of bitumen after cleaning the surface with brushes, etc. complete as per specifications. ALUMINIUM WORKS Supply & fixing Aluminium Doors, Windows & Partitions made of powder coated aluminium sections of minimum coating thickness 15 microns complete as per IS 1948:1961. Item includes all fittings and accessories complete as specified in detailed description. For glazed partitions with 5mm galss as per approved drawings SQM
63
140
2,572
60
b)
SQM
2,791
61
c)
SQM
2,436
62 63 64
d)
e)
For partly glazed (5mm thick) and partly panelled partitions using 12 SQM mm thick both side laminated exterior grade particle board as per approved drawings as per approved drawings For fully panelled partitions using 12 mm thick both side laminated SQM exterior grade particle board as per approved drawings For fully glazed (5mm) doors, including providing and fixing hinges, SQM pivots, all fittings including locking arrangements, concealed tower bolts, cost of PVC / Neoprene gasket, etc complete as per approved drawings. For partly glazed (5mm) partly panelled doors using 12 mm thick, both SQM side laminated exterior grade particle board including providing and fixing hinges, pivots, all fittings including locking arrangements, concealed tower bolts, cost of PVC / Neoprene gasket, etc complete as per approved drawings. For fully panelled doors using 12 mm thick, both side laminated exterior SQM grade particle board including providing and fixing hinges, pivots, all fittings including locking arrangements, concealed tower bolts, cost of PVC / Neoprene gasket, etc complete as per approved drawings. For fully panelled doors using sandwich panel marine-ply core not less SQM than 3mm thick faced with 20 gauge powder coated aluminium sheets including providing and fixing hinges, pivots, all fittings including locking arrangements, concealed tower bolts, cost of PVC / Neoprene gasket, etc complete as per approved drawings. For fully panelled doors using PVC multiwall panels of approved make, SQM including providing and fixing hinges, pivots, all fittings including locking arrangements, concealed tower bolts, cost of PVC / Neoprene gasket, etc complete as per approved drawings.
2,616
2,691
f)
3,895
Two Thousand Five Hundred and Seventy Two only Two Thousand Seven Hundred and Ninety One only Two Thousand Four Hundred and Thirty Six only Two Thousand Six Hundred and Sixteen only Two Thousand Six Hundred and Ninety One only Three Thousand Eight Hundred and Ninety Five only Three Thousand Nine Hundrd and Sixty Three only
65
g)
3,963
66
h)
3,866
67
i)
5,427
68
j)
3,972
ITEM CODE
Sl. No. k)
DESCRIPTION
Unit
RATES IN WORDS (RUPEES) Two Thousand Three Hundred and Sixty Four Only
69
For sliding windows using 5 mm thick glass including providing SQM approved standard hardware, weather strips, glazed channels, nylon gliders, rubber bumpers in interlocking sections, in-built self locking arrangements, etc. complete as per approved drawings. For openable casement windows using 5 mm thick glass including SQM approved quality gaskets for proper fixing and making window water tight, SS frictional / powder coated hinges, handle and other accessories such as hinges, peg stay, handle etc., complete as per approved drawings. For adjustable louvered ventilators with 4 mm thick pinheaded glass SQM including necessary accessories like screws, rawl plugs, anodised aluminium adjustable louver mechanism, all labour charges, sundries, etc. complete as per approved drawings. Providing and fixing glazing using approved plain float glass in aluminium doors, windows, ventilator shutters and partitions etc., with PVC / neoprene gasket etc., complete as per approved drawings and the directions of IOCL. (Item includes replacement of the damaged glass and disposal of the same.) 5 mm thick SQM 8 mm thick 12 mm thick SQM SQM
70
l)
2,937
71
m)
3,214
30
72 73 74
a) b) c) 31
Five Hundred and Twelve only Eight Hundred and Thirty Eight only One Thousand One Hundred and Ten only
75 76
a) b) 32
Providing and fixing ISI marked aluminium tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc., complete. 200 x 10 mm EACH 100 x 10 mm EACH Providing and fixing ISI marked aluminium handle ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete. 125 mm EACH 100 mm EACH Providing and fixing ISI marked aluminium casement stays ISI marked EACH anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc., complete. FULLY GLAZED ENTRANCE DOOR Supply and fixing of Powder coated Aluminium fully glazed Entrance SQM door using 12mm thick float glass (includes two side aluminum frame) including cost of floor springs, all accessories and as per standard approved drawings with powder coated aluminium sections. Supplying & fixing of aluminium grill of "Decogrille" or equivalent SQM approved make with 15 micron (min) anodising as per design code No. DG-107 with aluminium Decogrill make frame of design No. DG-3 complete & DG 6 (H section) including cost and conveyance of all materials,labour charges, sundries etc. complete as per directions of IOCL.
110 56
77 78 79
a) b) 33
36 30 249
Thirty Six only Thirty only Two Hundred and Forty Nine only
80
34 a)
3,269
81
35
1,614
ITEM CODE
Sl. No. 36 a)
DESCRIPTION
Unit
RATES IN WORDS (RUPEES) Three Thousand Five Hundred and Eighty Nine only
82
ALUMINIUM DOORS FOR PCF AND SPECIALISED WORKS Supplying & fixing of aluminium door shutters at site with 50 microns SQM Powder Coated aluminium sections of 83.50 x 44.45 x 3.00 mm (2.107 kg/rmt) with all necessary accessories like door lock, beadings, handles, screws and rowl plugs etc. including supplying and fixing of 6mm thick marine ply in fill pannel with 1 mm thk. laminate on both sides including cost of all materials and labour charges, contigencies etc. complete as per drawing & design given in all respect. (Main Door Shutters PlyMarino-1000-Royal Grey or Equivalent, Aluminium sections-Make Jindal or equivalent, Aluminium Sections-Powder Coated in Brown Matt Finish Ply Make-Century / Anchor / Greenply or Equivalent Laminate make Marino / Sunmica / Greenlam or Equivalent). Supplying & fixing of aluminium door shutters at site with 50 microns SQM Powder Coated aluminium sections of 83.50 x 44.45 X 3.00 mm (2.107 kg/rmt) with all necessary accessories like door lock, beadings, handles, screws and rowl plugs etc. including supplying and fixing of 4mm thick Aluminium Sheets powder coated on both sides including cost of all materials and labour charges , contigencies etc., complete as per drawing & design given in all respect. (W. C. Door Shutters Aluminium sections - Make Jindal or, equivalent, Aluminium Sections - Powder Coated in Brown Matt Finish, Aluminium Sheet -Powder Coated in Brown Matt Finish) Supplying & Fixing of Aluminium door shutters with 50 micron powder SQM coated aluminium pipe frame section 44.45x25.40x3.20mm(0.605 Kg/rmt) & 50 micron powder coated aluminium door section 20.50x38.10x3.05mm (1.363 kg/rmt) with all necessary accessories like tubular door lock, beadings, screws etc., including supplying & fixing of Aluminium sheet 4mm thk. powder coated on both sides and aluminium louver set powder coated. Aluminium Sheet Make - Jindal or Equivalent, Aluminium Sections - Make Jindal or Equivaient, Aluminium Sections Sheet & Louvers Powder Coated - Brown Matt, as Per Drawing & Design Complete in all respect. (Janitors Cabinet) FITTINGS & HARDWARES FOR DOORS & WINDOWS Providing and fixing following hardware to door shutters with suitable screws etc. complete as directed. Godrej make 6 lever mortice lock with a pair of CP handles (Catalogue EACH No. Handle LKYLDM605, Mortice Lock LKYLDM606) Godrej make keyed cylindrical lock with a pair of Stainless steel knobs EACH (Catalogue No. LKYPDC527) Door Stoppers EACH Supplying and fixing approved make hydraulic door closer including cost EACH and conveyance of all materials, labour charges for fixing, etc. complete as per directions of IOCL Supplying and fixing approved make hydraulic floor spring with cover EACH plates including cutting and making good floors for required embedding in floor, cost and conveyance of all materials, labour charges for fixing, etc.complete as per directions of IOCL Providing & fixing on doors / windows glass panes of approved make SQM brown / grey colour sun control film (reflective type) including all charges. ROLLING SHUTTER Providing & fixing rolling shutter made out of 18 gauge steel sheets for laths, including bottom rail, guide channels, lock plates, locking arrangement, fixing bolts, pulling handles, hood, rolling arrangement, standard make springs in brackets, necessary bearings, etc. including fixing of frames with rag bolts, grouting of parts in position etc. and also including two coats of zinc phosphate primer and two coats of synthetic enamel paint of approved colour, shade & brand etc. complete as per relevant IS standard or as per manufacturer's specifications or as directed by IOCL. Self-coiling type rolling shutter. SQM
83
b)
5,036
84
c)
4,724
X 37 85 86 87 88 89 a)
1,320
b) c) d)
860 49 773
One Thousand Three Hundred and Twenty only Eight Hundred and Sixty only Fourty Nine only Seven Hundred and Seventy Three only Two Thousand Four Hundred and Thirty Two only Three Hundred and Seventy Two only
e)
2,432
90
f)
372
XI 38
91
a)
2,485
ITEM CODE
Sl. No. b)
DESCRIPTION
Unit
RATES IN WORDS (RUPEES) Two Thousand Nine Hundred and Sixty Nine only Two Thousand Six Hundrd and Ninety Four only Three Thousand One Hundred and Seventy Eight only
92
Gear operated type-rolling shutters with gear box and crank handle at SQM waist level on outside. Same as item No.38 above but with grill of size 600mm high Self-coiling type rolling shutter SQM
39 93 a)
2,694
94
b)
Gear operated type-rolling shutters with gear box and crank handle at SQM waist level on outside. PLASTERING AND POINTING Providing & applying cement plaster for walls, columns, beams etc. including chipping concrete surface if required, finishing, scaffolding, curing, etc., complete: Cement plaster 12mm thick in CM 1:4 SQM Providing & applying 6 mm thick plain faced cement plaster in CM 1:3 SQM for underside of ceilings including hacking / chipping concrete surface, finishing, scaffolding, curing, etc. complete. Providing and applying 20 mm thick cement plaster in CM 1:4 in two SQM coats, under layer 10mm thick (rough) and top layer 10mm thick floated hard and trowelled smooth including chipping concrete surface (wherever required), curing, scaffolding etc. complete. Making grooves, bands, copings, drip course, etc. complete in plastered surface in CM 1:3 as per approved drawings and instructions of IOCL, etc. complete Grooves (horizontal / vertical) as per approved drawings upto 10mm RM wide and 10mm deep Providing 12mm thick plastering for Drip course of size as per RM drawings but not ess than a width of 20mm with cement mortar 1:4 including scaffolding, curing, finishing, etc. complete: Providing and fixing of 200mm wide chicken wiremesh of 24 gauge at SQM the junction of brickwork and RCC work, including fixing with nails, rawl plugs etc; before applying plaster. Providing Pointing in brick masonry / Rubble masonry in cement sand mortar 1:3 at all levels including raking joints, scaffolding, curing etc. complete for : Flush pointing SQM Ruled pointing SQM Providing & applying cement plaster 1:3 12mm thick with neat cement SQM flushing coat including chipping concrete surface if required, finishing, scaffolding, curing, etc., complete FLOOR FINISHES, SKIRTING AND DADO Providing and laying 1st quality white ceramic glazed wall tiles of approved make of minimum thickness 5mm as approved by the Engineer-in-Charge in skirting, dado, risers, etc. over 12mm thick cement mortar 1:3 mix, jointing with grey cement slurry and pointing with tile joint filler of approved make, including cost of all materials, labour, etc., complete. 200 x 300 Providing and laying 1st quality coloured ceramic glazed wall tiles of minimum thickness 5mm of approved make in all colours/shades of following sizes as approved by the Engineer-in-Charge in skirting, dado, risers, etc. over 12mm thick cement mortar 1:3 mix, jointing with grey cement slurry including pointing with tile joint filler of approved make and shade, cost of all materials, labour etc., complete 200 x 300 300 x 400 SQM SQM SQM
3,178
XII 40
95 96
a) 41
78 61
97
42
121
43
98 99
a) b)
14 18
100
44
37
45
a) b) 46
48 51 110
Forty Eight only Fifty One only One Hundred and Ten only
XIII 47
104
a) 48
572
105 106
a) b)
575 702
Five Hundred and Seventy Five only Seven Hundred and Two only
ITEM CODE
Sl. No. 49
DESCRIPTION
Unit
Rate (Rs.)
a) b) c) 50
Providing and laying 1st quality ceramic floor tiles (including treads) of minimum thickness 8mm of approved make in all colours/shades of following sizes as approved by the Engineer-in- Charge over 20mm thick cement mortar 1:4 mix, jointing with grey cement slurry including pointing with tile joint filler of approved make and shade, of matching shade including cost of all materials, labour etc., complete 300 x 300 SQM 400 x 400 600 x 600 Providing and laying of 1st quality vitrified ceramic floor tiles (including treads) of approved make in all colours/shades of following sizes of thickness as specified by the manufacturer and as approved by the Engineer-in-Charge over 20mm thick cement mortar 1:4 mix, jointing with grey cement slurry including pointing with tile joint filler of approved make and shade, including cost of all materials, labour etc., complete 400 x 400( minimum dimensions and thickness 7.5 8 mm) 600 x 600( minimum dimensions and thickness 9.6 10 mm) SQM SQM SQM SQM
Five Hundred and Sixty only Six Hundred and Seven only Seven Hundred and Twenty Three only
a) b)
1,017 1,176
51
Providing and laying 50 mm thick Indian Patent Stone flooring, treads, SQM landings, etc. comprising of 38 mm thick under layer of cement concrete 1:2:4 ( with graded stone aggregates of nomial size 12.5mm) and 12 mm thick top layer in cement mortar 1:1 including preparation of base, supplying & providing glass strips of size 40mm x 4mm in joints, rounding corners and junctions, casting in chequered board pattern, finishing, shuttering, curing, etc. complete Supplying and laying of pressed cement concrete tiles of minimum SQM thickness 20mm of approved make, size & colour with necessary 20mm thick CM 1:4 bedding, jointed with neat cement slurry including pointing with white cement mixed with pigment to match the shade of the tiles including rubbing & cleaning, preparation of base, cost of all materials and labour etc., complete. Supplying and laying of plain white marble of 18 mm thick (sample of SQM marble shall be approved by Engineer-in-charge) over 20mm (average) thick CM 1:4 bedding and jointed with white cement slurry including rubbing, mirror polishing, cost of all materials and labour etc., complete Supplying and fixing of 10mm thick mirror polished black granite tiles for SQM flooring / pump island edges etc. over 12mm thick CM 1:4 including sprinkling sand after applying Araldite, cost of all materials and labour etc. complete. Supplying and fixing of mirror polished black granite slab of 18-20 mm SQM thick for flooring / pump island including bedding in cement mortar 1:4, 20mm thick, sprinkling sand after applying Araldite, cost of all material and labour etc., complete (Payment for nosing will be made separately under respective item) Providing edge nosing for granite slabs including all charges. Half round edge nosing (Quarter portion of circle) Full round edge nosing (Half portion of circle) Supplying and fixing of cudappa slab in shelves for buildings 25mm thick both side polished jointed with CM 1:4 RM RM
322
One Thousand and Seventeen only One Thousand One Hundred and Seventy Six only Three Hundred and Twenty Two only
113
52
774
114
53
1,663
115
54
1,498
One Thousand Four Hundred and Ninety Eight only Two Thousand Six Hundred and Fifty Five only
116
55
2,655
56 117 118 a) b) 57 a) 58
211 245
Two Hundred and Eleven only Two Hundred and Forty Five only Seven Hundred and Nineteen only
119
SQM
719
120
a)
Supplying and laying of approved Kota stone slabs (sample of stone shall be approved by Engineer-in-charge) of specified size over 20mm thick bedding in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete 25mm thick in flooring SQM
624
ITEM CODE
Sl. No. 59
DESCRIPTION
Unit
Rate (Rs.)
121
a) 60
Supplying and laying of approved Shahabad stone slabs(sample of stone shall be approved by Engineer-in-charge) of specified size over 20mm thick bedding in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete 25mm thick in flooring SQM Supplying and laying of approved Cuddapah rough stone tiles 600 mm x 600 mm (sample of stone shall be approved by Engineer-in-charge) over 20mm thick bedding in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete 30 - 40 mm thick in flooring SQM Providing and fixing treads and risers of staircase with round nosing tiles, min 20mm thick of approved make, size, pattern, colour,shade, including cement mortar 1:4 bed, cutting, jointing, curing, and finishing, polishing etc. complete: Kota stone tiles of 25mm thick over 20mm thick CM 1:4 bedding SQM Shahbad stone tiles of 25mm thick over 20mm thick CM 1:4 bedding Cudappa stone tiles 25mm thick over 20mm thick CM 1:4 bedding SQM SQM
572
122
a) 61
505
a) b) c) 62
127
63 a)
128
XIV 64
129
65
Providing and laying 2 mm thick PVC flooring of approved make SQM confirming to IS 3462 -1986 including cost of all material and labour etc., complete GRANITE DOOR FRAMES FOR PCF WORKS Supplying and Fixing of 19mm thick Black Granite frame with rebate for SQM door as per drawing and 12mm dia bolt three Nos. to be properly grouted with the existing Brick wall. The cost shall include all materials, labour including grouting and fixing in the wall. PROVIDING TERRACING WITH WATER PROOFING Water Proofing : Providing and laying integral cement based water SQM proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces, etc., with average thickness of 120 mm and minimum thickness at Khurra as 65mm, as per detailed specifications. Providing and laying water proofing treatment in sunken portion of WCs, SQM bathroom etc., by applying cement slurry mixed with Armourcrete of M/s. The Structural Water Proofing Company Pvt. Ltd. or Tapecrete of M/s. CICO Engg. Service as per detailed specifications. Lime concrete terracing on roof of average thickness 100mm laid tofall SQM with 25mm nominal size brick aggregate and 50% lime mortar 1:2(1 lime putty : 2 surkhi) rammed and finished with gur and belgiri treatment complete including rounding or junctions with parapet wall complete. Providing and laying pressed clay tiles (as per approved pattern 20mm SQM nominal thickness and of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water (1 cement : 4 coarse sand) and finished neat, complete Making Khurras 45 x 45cm with average minimum thickness of 5cm Nos cement concrete 1:2:4 (1 Cement : 2 Coarse Sand : four Graded Stone aggregate of 20mm nominal size) over PVC sheet 1m x 1m x 400 micron finished with 12mm cement plaster 1:3 (1Cement : 3Coarse sand) and a coat of neat cement rounding the edges and making and finishing the outlet complete Making gola in CC 1:2:4, including finishing in CM 1:3 etc., complete. RM Providing Roofing, Cladding, Gutter & Flashing including all leads / lifts Supplying & fixing of 18 gauge GI plain sheet of approved make with SQM necessary folding / fabrication using hydraulic press for flashing sheet / fascia, etc. in roofing / buildings / sheds, hoardings, etc. including all necessary fixtures etc., complete
Five Hundred and Fifty Nine only Four Hundred and Sixty Five only Five Hundred and Fifty Nine only Five Hundred and Ninety One only
2,894
425
226
130
66
187
131
67
360
132
68
110
133
69 XV
65
134
70
874
10
ITEM CODE
Sl. No. 71
DESCRIPTION
Unit
135
136
72
Supplying & fixing of 16 gauge GI plain sheet of approved make with SQM necessary folding / fabrication using hydraulic press for flashing sheet / fascia, etc. in roofing / buildings / sheds, hoardings, etc. including all necessary fixtures etc., complete Supplying & fixing of 18 gauge MS sheet with necessary folding / KG fabrication using hydraulic press for flashing sheet / fascia, etc. in roofing / buildings / sheds, hoardings, etc. including all necessary fixtures etc., complete Supplying & fixing of 16 gauge MS sheet with necessary folding / KG fabrication using hydraulic press for flashing sheet / fascia, etc. in roofing / buildings / sheds, hoardings, etc. including all necessary fixtures etc., complete Supplying & fixing of 14 gauge (2 mm) MS sheet with necessary folding KG / fabrication using hydraulic press for flashing sheet / fascia, etc. in roofing / buildings / sheds, hoardings, etc. including all necessary fixtures etc., complete Supplying & fixing of 22 gauge GI corrugated sheet of approved make SQM including necessary J/L bolts, nuts, washers, all labour charges, scaffolding, sundries etc. complete. Supplying & fixing 18 gauge GI ridges fabricated out of GI sheets of RM approved make as per specifications including all the necessary fittings, fastners, etc. complete Supplying & fixing half round PVC gutters 160 mm of approved make RM as per specifications including all the necessary fittings, fastners, etc. complete Supplying & fixing of 6 mm thick corrugated AC sheet of approved for SQM roofing / wall cladding etc. including necessary J/L bolts, nuts, washers, all labour charges, scaffolding, sundries etc. complete. Supplying & fixing 6 mm thick AC ridges of approved make as per RM standard practice including all the necessary fittings, fastners, etc. complete Providing and fixing 700mm wide rain water gutter fabricated out of 18 RM Gauge Aluminium Sheets of 1200 mm width including MS clamp supports, fittings, fastners, etc. complete, as per detailed drawings. (No joints shall be provided in the gutter) Providing and fixing 700mm wide rain water gutter fabricated out of 18 RM Gauge GI Sheets of 1200 mm width including MS clamp supports, fittings, fastners, etc. complete, as per detailed drawings. Providing and fixing Klippon Galvalume / Zincalume 0.55 mm TCT or SQM equivalent steel roofing system of approved make conforming to ASTM:A446 as per standard specifications & manufacturers instructions, etc. complete as directed by IOCL Providing and fixing ridges suitable for Klippon roofing system 500 mm RM wide 0.55 mm TCT equivalent of approved make conforming to ASTM:A446 as per standard specifications & manufacturers instructions, etc.complete as directed by IOCL Providing and fixing High Rib Galvalume / Zincalume 0.47 mm TCT or SQM equivalent steel roofing system of approved make as per standard specifications & manufacturers instructions, etc. complete as directed by IOCL Providing and fixing ridges suitable for High Rib Galvalume / Zincalume RM roofing system 500 mm wide 0.47 mm TCT equivalent of approved make as per standard specifications & manufacturers instructions, etc.complete as directed by IOCL Providing and fixing High Rib coloured Galvalume / Zincalume 0.50 mm SQM TCT or equivalent steel roofing system of approved make as per standard specifications & manufacturers instructions, etc. complete as directed by IOCL Providing and fixing ridges suitable for High Rib coloured Galvalume / RM Zincalume roofing system 500 mm wide 0.50 mm TCT equivalent of approved make as per standard specifications & manufacturers instructions, etc.complete as directed by IOCL FALSE CEILING
71
137
73
71
138
74
71
139 140
75
738
Seven Hundred and Thirty Eight only Two Hundred and Fifty Six only Two Hundred and Twenty Nine only One Hundred and Ninety Two only One Hundred and Seventy Three only One Thousand One Hundred and Forty Eight only One Thousand and Six only One Thousand One Hundred and Twenty One only Nine Hundred and Three only
76
256
141
77
229
142
78
192
143
79
173
144
80
1,148
145
81
1,006
146
82
1,121
147
83
903
148
84
805
149
85
644
150
86
920
151
87
759
XVI
11
ITEM CODE
Sl. No. 88
DESCRIPTION
Unit
RATES IN WORDS (RUPEES) One Thousand Two Hundred and Sixty Five only
152
Supply and installation of false ceiling system of approved make as per SQM vendor list comprising of 150/200 mm wide panels (150F/200F including filler strips, if any) formed out of pre-coated, weather resistant and petroleum fumes resistant steel panels coated in white colour including the cost of providing and fixing rigid suspension arrangement as per drawings and specifications. The direction of the panel should be perpendicular to the road. The manufacturers specifications should be made available to the Site Engineer and the work should be executed strictly as per manufacturers specification. Providing and Fixing TRAC -Tile or Equivalent False ceiling inside the SQM Sales rooms and Convineos, comprising of 600 mm x600 mm size aluminium tiles as per specifications including glass wool insulation above the false ceiling and as directed by the IOCL. Providing Gypsum board false ceiling of 12.5 mm thick tapered edge SQM gypsum board using standard GI sections including scaffolding, labour, making necessary cutouts, sundries etc. complete as per standard specifications and as directed by IOCL. PROVIDING & CONSTRUCTING DRIVEWAYS FLEXIBLE PAVEMENTS Providing Granular sub-base for the specified depth in layers of 200mm CUM thick, using well graded gravel or natural sand & gravel / crushed stone mix as per IS sieve designation 26.5mm to 0.075mm with minimum CBR value of 20%. The material passing 425 microns sieve to be tested according to IS:2720 (Part V) shall have liquid limit and plasticity index not more than 25% and 6% respectively. The granular sub base to be compacted to 95% of the maximum dry density with 8-10 ton road roller. Providing and laying WBM 100 mm thick consolidated thickness for SQM bottom layer (GRADE I) of sub base, metal size ranging from 90 to 45mm with screenings (13.2 mm and less) and binding materials to fill the voids and compacted with 8-10 Ton road roller including all charges. Providing and laying WBM 75 mm thick consolidated thickness SQM (GRADE II) for middle layer of sub base metal size ranging from 63 to 45 mm with screeingings (13.2 mm and less) and binding materials to fill the voids and compacted with 8-10 Ton road roller including all charges. Providing and laying WBM 75 mm thick consolidated thickness SQM (GRADE III) for top layer of sub base metal size ranging from 53 to 22.4 mm with screeingings (13.2 mm and less) and binding materials to fill the voids and compacted with 8-10 Ton road roller including all charges. Providing and laying wet mix macadam base course using 45 mm and CUM down graded aggregates, including mixing, laying and compacting clean, crushed and graded aggregates and granular material premixed with water to a dense mass on a prepared subbase in accordance with the requirements of the specifications, drawings and as directed by IOCL. Providing and laying rubble of size 150mm to 230mm for soling CUM including levelling, hand packing, blinding, wedging to a thickness of 230mm average and consolidating by 8-10 tonnes road roller etc. complete. BITUMINOUS MACADAM Providing and laying Bituminous Macadam of 75mm thick with SQM compacted crushed aggregates of size ranging from 45mm to 22.4mm premixed with a bituminous binder (grade 80/100) laid immediately after mixing over the base and compacted with 8 to 10 tonnes road roller etc., complete Providing 75mm thick Built Up Spray Semigrout using 40mm IRC size SQM HBG machine crushed metal laid over a tack coat over the existing B.T surface as per detailed specifications. PREMIX CARPET (OTHER THAN HOT MIX PLANT PREMIX AND USE OF MECHANICAL PAVER FOR THE APPROACH ROAD / INSIDE OUTLET)
153
89
2,013
154
90
573
155
XVII A 91
840
156
92
130
157
93
112
158
94
112
159
95
1,170
160
96
610
161
97 a)
355
162
98
264
99
12
ITEM CODE
Sl. No. a)
DESCRIPTION
Unit
Rate (Rs.) 90
163
164
b)
165
c)
Supplying and laying of stone aggregate to a thickness of 25mm with SQM 10mm size metal premixed with bituminous binder (Grade 80/I00) at 56 Kg/Cum, spreading with tack coat and compacted by 8 -10 tonnes road roller immediately after spreading premix etc. complete. Supplying and laying of stone aggregate to a thickness of 75mm to be SQM laid in two layers with 10mm size metal and shall be mixed with bituminous binder (Grade 80/I00) at 56 Kg/Cum Spreading with tack coat and shall be compacted by 8 -10 tonnes road roller immediately after spreading premix etc. complete. Supplying and laying of stone aggregate to a thickness of 40mm with SQM 10mm size metal and premixed with bituminous binder (Grade 80/I00) at 56 Kg/Cum, spreading with tack coat and compacted by 8 -10 tonnes road roller immediately after spreading premix etc. complete.
266
143
13
ITEM CODE
DESCRIPTION
Unit
Rate (Rs.) 69
166
101
SEAL COAT Providing and laying 6 mm thick seal coat with tack coat including SQM preparing surface of road with bitumen heated in bitumen boiler fitted with the spray set spraying using 98 kg of bitumen of grade 80/100 and blindng surface with 0.90 cum of stone aggregate of 6.3mm size (passing 11.2mm sieve and retained on 2.36mm sieve only) per 100 SQM of road surface including rolling and finishing with power road roller all complete. PREMIX CARPET USING HOT MIX PLANT PREMIX AND USE OF MECHANICAL PAVER FOR THE APPROACH ROAD / INSIDE OUTLET. Providing and laying 50mm premix bituminous macadam base course SQM with stone aggregate of quality size and grading as specified in technical specification and straight run bitumen of grade 80/100 @3.5% by weight of total mix including hot mixing of stone aggregate and bitumen in hot mix plant, transporting mixed material and laying mixed material with paver finisher to the required level and grade, rolling with road roller of 8 to 10 tonne capacity to achieve the required compaction and density. Providing, laying and consolidation, semi dense bituminous concrete on SQM prepared surface, with specified graded crushed aggregates as per technical specification for wearing course, including, heating, course, including, heating, aggregate and binder in hot mix plant, laying to uniform consolidated thickness of 25mm, and rolling with 8 - 10 power roller to required compaction over a tack coat of 2.0 Kg per 10 Sqm. (Using bitumen of grade 80/100) Providing and laying 50mm premix bituminous macadam base course SQM with stone aggregate of quality size and grading as specified in technical specification and straight run bitumen of grade 60/70 @3.5% by weight of total mix including hot mixing of stone aggregate and bitumen in hot mix plant, transporting mixed material and laying mixed material with paver finisher to the required level and grade, rolling with road roller of 8 to 10 tonne capacity to achieve the required compaction and density. Providing, laying and consolidation, semi dense bituminous concrete on SQM prepared surface, with specified graded crushed aggregates as per technical specification for wearing course, including, heating, course, including, heating, aggregate and binder in hot mix plant, laying to uniform consolidated thickness of 25mm, and rolling with 8 - 10 power roller to required compaction over a tack coat of 2.0 Kg per 10 Sqm. (Using bitumen of grade 60/70) CONCRETE PAVER BLOCKS Providing and laying Pre-cast cement concrete block paved driveway including supplying 80mm thick pre-cast machine made cement concrete block of approved size, shape, shade and manufacturers and as per IOCL's specifications. The paver blocks shall have peripheral chamfer, with average crushing strength not less than 40 N/Sq.mm as per BS6717 Part -1(1986), maximum water absorption of 2% after 10 minutes and 5% after 24 hrs. as per BS 1881, maximum dimensional deviations of +/- 2mm on length & width and +/- 3mm on on thickness. The job includes supplying & laying a layer of 50mm thick clean course sand on thoroughly compacted sub-base below the paver blocks, cutting the paver blocks wherever required with hydraulic splitter, filling in the joints at the edges of paver blocks with sand,compacting with machine vibrator to required line and level, etc. complete. (Payment for provision of edge restraints shall be made separately) with 80mm thick paver blocks (grey / coloured) with 80mm thick paver blocks (reflective) SQM SQM
167
a)
277
168
b)
177
169
c)
282
170
d)
180
102
171 172
a) b)
706 930
Seven Hundred and Six only Nine Hundred and Thirty only
14
ITEM CODE
DESCRIPTION
Unit
RATES IN WORDS (RUPEES) Four Thousand Two Hundred and Ninety Seven only
173
174
104
RIGID PAVEMENTS Providing and laying design mix reinforced cement concrete in roads / CUM drive-ways works of Grade M25 having test beam flexural strength of minimum 35 kg / Sq.cm at 28 days using minimum 330 kg of cement per cubic metre of concrete, coarse sand and graded stone aggregates of 20 mm nominal size in appropriate proportions as per IOCL specification, including dewatering with vacuum pump, finishing the the floor with power trowel and well compacted with plate compactor using double beam screed vibrator with proper side shuttering (Rate shall include cost of shuttering & vacuum dewatering. Payment for reinforcement shall be made separately) Supplying & fixing in position 25mm thick bitumen imprignated fibre SQM board "SHALITEX" or equivalent, as approved by Engineer-in-charge, conforming to IS 1838 including cost of primer, sealing compound with bitumastic filler to a depth of 50mm etc. in the expansion joints etc. as per drawings, specfications and directions of IOCL complete. Making thermal expansion joints by providing grooves 1/4 depth of RM concrete thickness and filling with polysulphide sealing compound (2 pack system) for a size of 20 mm x 15 mm with lower portion filled with filler material as per drawings, specfications and directions of IOCL complete. RCC Hume Pipes Supplying and laying RCC Hume pipes of NP2 class conforming to IS 458 under driveway and for culverts including excavation, providing collar joints, backfilling, etc. complete as directed by IOCL. 150 mm dia. RM 200 mm dia. 300 mm dia. RM RM
679
175
105
331
XVIII 106
a) b) c) 107
Four Hundred and Forty only Five Hundred and Forty Eight only Seven Hundred and Twenty Two only
a)
Supplying and laying RCC Hume pipes of NP3 class conforming to IS 458 under driveway and for culverts including excavation, providing collar joints, backfilling, etc. complete as directed by IOCL. 350mm dia RM
1,375
b)
450mm dia
RM
1,816
c)
600 mm dia.
RM
2,445
d) e)
RM RM
4,204 4,949
f)
1200 mm dia
RM
6,956
One Thousand Three Hundred and Seventy Five only One Thousand Eight Hundred and Sixteen only Two Thousand four Hundred and Forty Five only Four Thousand Two Hundred and Four only Four Thousand Nine Hundred and Forty Nine only Six Thousand Nine Hundred and Fifty Six only
108
185
a)
Supplying and laying RCC Hume pipes of NP 4 Class (without collars) conforming to IS 458 under driveway and for culverts including excavation, providing collar joints, backfilling, etc. complete as directed by IOCL. 450 mm dia RM
1,758
186
b)
600mm dia
RM
2,499
187
c)
1000 mm dia
RM
4,818
One Thousand Seven Hundred and Fifty Eight only Two Thousand Four Hundred and Ninety Nine only Four Thousand Eight Hundred and Eighteen only Seven Thousand and Twenty One only
188
d)
1200 mm dia
RM
7,021
15
ITEM CODE
DESCRIPTION
Unit
Rate (Rs.)
a) b) 110
192
111
193
112
113
a) b) 114
STRUCTURAL STEEL WORKS Supplying and fabricating (Shop Fabrication to be done as per specifications and approved fabrication drawings), transporting to site & erecting structural steel members for canopy and other works including two coats of zinc phosphate primer and two coats of synthetic enamel paint, provision of necessary erection bolts, nuts, washers, cleats, stiffeners, gussets, base plate and all operations such as, but not limited to, preheating as per specifications, straightening, cutting, drilling, grinding etc. complete. (Weight of erection bolt and welds shall not be considered for payment) Members fabricated from rolled steel sections/plates/strips, etc KG Members fabricated from tubular sections KG Extra over and above item No. 109 for structural steel work for painting KG polyurethene paint using zinc ethyl silicate primer, polyamid mio undercoat,and alphatic acrylic polyurethene finish paint, instead of two coats of zinc phosphate primer and two coats of synthetic enamel paint, including all charges. Supplying & fixing MS security grills of approved design for windows, KG ventilators, doors etc., welded type using MS rounds, MS squares, MS flats etc. including painting two coats of zinc phosphate primer and two coats of synthetic enamel paint, etc. complete as per drawings and directions of IOCL. Supplying & fixing MS gratings of welded type for drain covers using KG MS flats and angles, including painting two coats of zinc phosphate primer and two coats of synthetic enamel paint, etc. complete as per drawings and directions of IOCL. Supplying and fixing MS foundation bolts with necessary GI nuts and washers of specified sizes, all conforming to relevant Indian Standards and as approved by Engineer-in-charge : Bolts of all sizes upto and including 450 mm length. KG Bolts of all sizes above 450 mm length. KG Providing & fixing concertina fencing comprising of GI concertina strips RM and barbed wire of 12SWG, 2 strands & 4 point including MS angle posts, straightening, fixing with MS angle post using clips, drilling holes, painting MS bar / angles with two coats of zinc phosphate primer and two coats of aluminium paint etc. complete as per drawing No. DRG. No. ENG/ 404-3/3, and as per directions of IOCL. Providing and fixing chain link fencing, having mesh 50mmx50mm RM made out of 10 gauge hot dipped galvanised wire and barbed wire of 12SWG, 2 strands & 4 point with necessary nuts, bolts, washers and other fixtures required, painting MS bar / angles with two coats of primer and two coats of aluminium paint etc. complete as per drawing No. DRG. No. ENG/ 403-1/2, 2/2 and specifications. (The rate for civil works like excavation, brick masonry, PCC etc. shall be paid separately). Providing and fixing chain link fencing, using 10SWG GI wire 50mm RM square mesh fixed with 25 mm square tube of 16 guage with vertical post of 50 mm x 50 mm with necessary nuts, bolts, washers and other fixtures required, painting two coats of zinc phosphate primer and two coats of aluminium paint etc. complete as per drawing No. IOC/CAPEX/154 A and specifications. (The rate for civil works like excavation, brick masonry, PCC etc. shall be paid separately). BORE WELL Drilling Borewell Identifying the point for drilling the bore well. LS Drilling 165mm-180mm dia borewell up to a depth of 65RM inclusive of all works necessary for commissioning. Drilling165mm-180mm dia borewell from 65 - 100RM inclusive of all works necessary for commissioning Drilling 165mm-180mm dia borewell a beyond 100RM inclusive of all necessary for commissioning. Supplying and fixing high density polymer air pipe of 12mm dia for borewell upto a depth of 65RM. Supplying and fixing high density polymer air pipe of 12mm dia for borewell from 65 -100RM. Supplying and fixing high density polymer air pipe of 12mm dia for borewell beyond 100RM. RM RM RM RM RM RM
68 79 4
74
77
99 97 519
Ninety Nine only Ninety Seven only Five Hundred and Nineteen only
197
115
1,001
198
116
950
XX 117 a) b) c) d) e) f) g)
Two Thousand and Five Hundred only Two Hundred and Eighty Six only Three Hundred and Twenty Five only Four Hundred and One only Thrity Six only Forty One only Forty Seven only
16
ITEM CODE
DESCRIPTION Supplying and fixing high density polymer water pipe of 25mm dia for borewell upto a depth of 65 RM. Supplying and fixing high density polymer water pipe of 25mm dia for borewell from 65-100RM. Supplying and fixing high density polymer water pipe of 25mm dia for borewell below 100RM. Supplying and fixing high density polymer water pipe of 32mm dia for borewell upto a depth of 65 RM. Supplying and fixing high density polymer water pipe of 32mm dia for borewell from 65-100RM. Supplying and fixing high density polymer water pipe of 32mm dia for borewell below 100RM. Supplying and fixing high density polymer water pipe of 40mm dia for borewell upto a depth of 65 RM. Supplying and fixing high density polymer water pipe of 40mm dia for borewell from 65-100RM. Supplying and fixing high density polymer water pipe of 40mm dia for borewell below 100RM. Providing 165mm dia PVC casing pipe (6 kg/cm2) in bore well and drilling upto 200 mm dia borehole for fixing the pipe to a required depth AIR COMPRESSOR Providing, fitting and commissioning single phase compressor with 2 HP motor with all accessories for borewell, including all charges.
Unit RM RM RM RM RM RM RM RM RM RM
RATES IN WORDS (RUPEES) Sixty Seven only Seventy four only Eighty One only Ninety One Only One Hundred only One Hundred and Ten only One Hundred and Fifteen only One Hundred and Twenty Four only One Hundred and Thirty Five only Seven Hundred and Forty Eight only Twenty Thousand Seven Hundred and Twenty Three only Eighteen Thousand and Ninety Two only Sixteen Thousand Two Hundred and Sixty Four only Seventeen Thousand Nine Hundred and Seventy Five only Twenty Thousand Seven Hundred and Twenty Nine only Twenty Thousand Nine Hundred and Ninety Six only Twenty Three Thousand Five Hundred and Six only Twenty Six Thousand Five Hundred and Two only Twenty Eight Thousand Four Hundred and Forty Five only One Hundred and Seventy Three only Six Hundred and Ninety only Ten Thousand and Fifty One only Four Thousand Six Hundred and Sixty Two only
206 207 208 209 210 211 212 213 214 215
216 217
EACH
20,723
b) 119 a)
Providing, fitting and commissioning single phase compressor with 1.5 EACH HP motor with all accessories for borewell, including all charges. BORE WELL PUMP Providing, fitting and commissioning upto 10 stage 1.0 HP submersible EACH pump of approved make with all accessories for borewell, including all charges. Providing, fitting and commissioning upto 20 stage 1.5 HP submersible EACH pump of approved make with all accessories for borewell, including all charges. Providing, fitting and commissioning upto 21 to 25 stages 1.5 HP EACH submersible pump of approved make with all accessories for borewell, including all charges. Providing, fitting and commissioning upto 20 stage 2 HP submersible EACH pump of approved make with all accessories for borewell, including all charges. Providing, fitting and commissioning upto 21 to 30 stages 2 HP EACH submersible pump of approved make with all accessories for borewell, including all charges. Providing, fitting and commissioning upto 20 to 30 stages 3 HP EACH submersible pump of approved make with all accessories for borewell, including all charges. Providing, fitting and commissioning upto 8 to 12 stages 5 HP EACH submersible pump of approved make with all accessories for borewell, including all charges. FIRE BUCKET AND EXTINGUISHERS Supply of Fire buckets (9 litre capacity) painted white inside and red EACH outside with letters 'fire' in black Supplying & providing Fire bucket stand- 4 buckets hanging EACH arrangement Supplying and fixing of 4.5kg CO2 fire extinguisher of approved make EACH Supplying and fixing of 10kg DCP fire extinguisher of approved make EACH
18,092
16,264
b)
17,975
c)
20,729
221
d)
20,996
222
e)
23,506
223
f)
26,502
224
g)
28,445
XXII 124
a) b) c) d) e) f)
WATER SUPPLY, PLUMBING AND SANITARY WORKS Supplying and fixing of following PVC pipes (15 kg/cm2, 10 kg/cm2, 6 kg/cm2) including all PVC bends, elbows special arrangements, complete. 20mm (15 kg/cm2) 25mm (15 kg/cm2) 32mm (10 kg/cm2) 40mm (10 kg/cm2) 50mm (6 kg/cm2) 63mm (6 kg/cm2)
RM RM RM RM RM RM
49 63 63 88 67 95
Forty Nine only Sixty Three only Sixty Three only Eighty Eight only Sixty Seven only Ninety Five only
17
ITEM CODE
DESCRIPTION
Unit RM RM RM
RATES IN WORDS (RUPEES) One Hundred and Twenty Six only Two Hundred and Thirty Seven only Four Hundred and Eighty Two only Three Thousand One Hundred and Twenty only Three Thousand Six Hundred and Thirty Four only Two Thousand Nine Hundred and Twenty only Three Thousand Four Hundred and Seventy Seven only Three Hundred and Sixteen only Four Hundred and Forty Three only Nine Hundred and Sixty Three only
238
239
b)
240 241
126 a)
b)
242 243
127 a) b) 128 a)
244
245
b)
129 i
246 247
a)
VITREOUS CHINA ORISSA PATTERN WC Providing & fixing first quality white vitreous china orissa pattern WC EACH squatting pan of size 580 x 440 mm with 10 litre PVC low level flushing cistern with all fittings as per detailed specifications. Providing & fixing first quality coloured vitreous china orissa pattern WC EACH squatting pan of size 580 x 440 mm with 10 litre PVC low level flushing cistern with all fittings as per detailed specifications. VITREOUS CHINA EUROPEAN TYPE WC Providing & fixing first quality white vitreous china European type WC EACH pan with 10 litre PVC low level flushing cistern and seat cover with all fittings as per detailed specifications. Providing & fixing first quality coloured vitreous china European type EACH WC pan with 10 litre PVC low level flushing cistern and seat cover with all fittings as per detailed specifications. SOLID PLASTIC SEAT COVER FOR EWC Providing and fixing solid plastic seat and lid of approved make for EACH European type WC pan including all charges. Providing and fixing coloured solid plastic seat and lid of approved EACH make for European type WC pan including all charges. PVC FLUSHING CISTERN Providing & fixing 10 litres white PVC flushing cistern including EACH supporting brackets, mosquito proof coupling of approved make, pull handle, etc. complete as directed by IOCL. (Item includes removing the old fittings in case of replacement without any extra cost) Providing & fixing 10 litres coloured PVC flushing cistern including EACH supporting brackets, mosquito proof coupling of approved make, pull handle, etc. complete as directed by IOCL. (Item includes removing the old fittings in case of replacement without any extra cost) FLAT BACK OR CORNER TYPE URINAL Providing & fixing white vitreous china flat back or wall corner type lipped front urinal basin of the following sizes with drain pipe and all fittings complete as directed by IOCL. (Item includes removing the old fittings in case of replacement without any extra cost) 430 x 260 x 350mm size flat back urinal. EACH
3,120
3,634
2,920
3,477
316 443
963
993
1,512
One Thousand Five Hundred and Twelve only One Thousand Six Hundred and Fifty Two only
b)
EACH
1,652
ii
248 249
a)
Providing & fixing coloured vitreous china flat back or wall corner type lipped front urinal basin of the following sizes with drain pipe and all fittings complete as directed by IOCL. (Item includes removing the old fittings in case of replacement without any extra cost) 430 x 260 x 350mm size flat back urinal. EACH
1,745
b)
EACH
1,955
One Thousand Seven Hundred and Forty Five only One Thousand Nine Hundred and Fifty Five only Two Thousand Nine Hundred and Thirty Three only
250
130 a)
FLAT BACK WASH BASIN Providing & fixing white vitreous china flat back wash basin of size EACH 550mm x 400mm with CI brackets painted white with 15mm CP brass pillar tap and angle valve, CP brass waste coupling with rubber plug, pattern, 32mm dia CP brass bottle trap & its unions, including cutting & making good the wall & floor surface/ tiled surface wherever required. (Item includes removing the old fittings in case of the replacement without any extra cost.)
2,933
18
ITEM CODE
Sl. No. b)
DESCRIPTION
Unit
RATES IN WORDS (RUPEES) Three Thousand Two Hundred and Thirty Six only
251
252
131
Providing & fixing coloured vitreous china flat back wash basin of size EACH 550mm x 400mm with CI brackets painted white with 15mm CP brass pillar tap and angle valve, CP brass waste coupling with rubber plug, pattern, 32mm dia CP brass bottle trap & its unions, including cutting & making good the wall & floor surface/ tiled surface wherever required. (Item includes removing the old fittings in case of the replacement without any extra cost.) Supplying & fixing concealed battery operated electronic flushing EACH system of approved make, for urinals including all charges as per the requirements of IOCL. CERA Cat. No. 6904 or appd. equivalent. Supplying & fixing the following of approved quality fittings as per IOCL's requirements and instructions. Providing & fixing CP brass towel rail, of 1.25mm wall thickness pipe & EACH 600mm long Providing & fixing CP brass toilet paper holder of appd. make and EACH quality Providing & fixing CP brass liquid soap container of appd. make & EACH quality Providing & fixing white viterous china recessed pattern soap tray of EACH size 216 x 108mm. Providing & fixing coloured viterous china recessed pattern soap tray of EACH size 216 x 108mm Providing & fixing 600mm x 450mm and min. 5.5mm thick bevelled EACH edge mirror of approved make with 6mm thick approved marine ply backing, CP brass hanging hooks, fixing screws, etc. Providing & fixing 15 mm CP brass angle valve of appd. make & quality EACH Providing & fixing 15 mm CP brass pillar cock of appd. make & quality EACH
6,243
Two Hundred and Fifty Six only Two Hundred and Ninety Two only Three Hundred and Forty Eight only Three Hundred and Twenty Five only Four Hundred and Thirty only Five Hundred and Seventy Eight only Five Hundred and Twenty only Five Hundred and Forty One only Seven Hundred and Twenty Three only Seven Hundred and Seventy One only Six Hundred and Thirty only Four Hundred and Sixteen only Two Hundred and Forty One only Five Hundred and Fifty Seven only
g) h) i) j) k) l) 133 134
267
135
136
Providing & fixing 15 mm CP brass concealed stop cock with wall EACH flange of approved make & quality Providing & fixing 20 mm CP brass concealed stop cock with wall EACH flange of approved make & quality Providing & fixing 15 mm CP brass long body bib cock of approved EACH make & quality Providing & fixing overhead CP adjustable spray shower of approved EACH make & quality with shower arm. Providing & fixing ball valve for garden of 15 mm dia of approved make EACH & quality Supplying & fixing cast iron floor trap (Nahani) of 100mm inlet & 75mm EACH outlet of self cleansing design with cast iron screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good walls & floor surface etc. complete. Supplying & fixing best quality PVC floor trap (Multi trap) of 100mm inlet EACH and 75mm outlet of self cleansing design including cost of cutting making good walls & floor surface. Supplying, laying and jointing glazed stoneware pipes grade A with stiff mixture of cement in the proportion 1:3 over 100 mm CC bed of 1:3:6, including excavation to the required depth, back filling, watering, consolidation, making necessary connections with fittings, testing of joints etc. complete 100mm dia. 150 mm dia. RM RM
230
a) b) 137
271
138
Supplying & fixing SW gully trap of grade "A" complete with CI grating, EACH brick masonry chamber & water tight CI cover, with frame of 300 x 300mm size (inside) The weight of Cover shall be min. 4.50 Kg and that of frame 2.70 KG. Item includes required excavation, back filling, PCC, brickwork, plastering in CM1:4, etc. complete Construction of brick masonry inspection chamber/manhole of 600 x EACH 600 x 750mm internal dimension with RCC cover slab 150 mm thick including necessary excavation, CC 1:4:8, 100mm thick in foundation, brick masonry, plastering in CM 1:3 on all exposed surfaces and inside the manhole, with a floating coat of neat cement & making channels in CC 1:2:4 in bed, complete including curing etc. complete
Three Hundred and Sixty Four only Four Hundred and Thirteen only One Thousand Two Hundred and Seventy Two only
3,899
19
ITEM CODE
DESCRIPTION Providing & constructing of septic tank and soak pit as per IOC standard drawing including inlet and outlet chambers, heavy duty CI manhole cover, vent pipe etc. complete. Item includes 150mm dia.PVC pipe (6 kg/cm2) between soak pit and septic tank, excavation, PCC, brickwork, plastering all other civil works as per drawing etc. complete For 50 users For 20 users
Unit
Rate (Rs.)
272 273
a) b)
LS LS
94,065 60,563
Ninety Four Thousand and Sixty Five only Sixty Thousand Five Hundred and Sixty Three only
140
a)
Supplying and installing of H. D. moulded polyethylene tank, "SINTEX" or equivalent approved make water storage tank of following capacities including all fittings like drain plug etc., placing on plain hard surface, etc. complete 500 Litres EACH
2,682
b)
1000 Litres.
EACH
5,363
c)
2000 Litres.
EACH
10,726
Two Thousand Six Hundred and Eighty Two only Five Thousand Three Hundred and Six Three only Ten Thousand Seven Hundred and Twenty Six only
279 280
Providing and fixing stainless steel jali (grating) with or without hole for waste pipe for floor/Nahini trap 75mm dia - Weight not less than 70 grams EACH 100 mm dia - Weight not less than 100 grams EACH Providing and fixing plastic moulded jali of required colour and shade for floor/Nahini trap Circular type EACH Rectangular with openable circular - lid EACH Providing & fixing Brass/GM full way gate valve with CI wheel screwed ends of IS approved quality. 15mm dia EACH 20mm dia 25mm dia 32mm dia EACH EACH EACH
39 69
34 39
Four Hundred and Seventy Seven only Six Hundred and Forty only Nine Hundred and Ninety Five only One Thousand Three Hundred and Ninety only One Thousand Eight Hundred and Seventy Five only
e)
40mm dia
EACH
1,875
144
286
a) 145 a)
287
Providing and filling rain water harvesting pits stone aggregates/ ballast in specified sizes cost and conveyance of all materials, labour charges, sundries etc. complete 40 mm stone aggregates CUM WATER SUPPLY, PLUMBING AND SANITARY WORKS FOR PCF AND SPECIALISED WORKS Providing & fixing first quality white vitreous china wall hung European EACH type WC pan (Parryware Cascade or equivalent) with seat cover with all fittings and fitting with chair brackets / heavy rag bolts with rubber bush and stainless steel cap, after drilling holes of 20 mm dia and inserting suitable sleeves etc. complete as per detailed specifications. Providing & fixing first quality coloured vitreous china wall hung EACH European type WC pan (Parryware Cascade or equivalent) with seat cover with all fittings and fitting with chair brackets / heavy rag bolts with rubber bush and stainless steel cap, after drilling holes of 20 mm dia and inserting suitable sleeves etc. complete as per detailed specifications. Providing & fixing first quality white vitreous china Anglo Indian type WC EACH pan with seat cover with all fittings as per detailed specifications. Providing & fixing first quality white vitreous china Urinal basin 420 x EACH 610 with built in Automatic Flushing Sensor- parrryware with all fittings as per detailed specifications.
700
4,391
288
b)
5,686
289 290
c)
3,322
d)
11,569
Three Thousand Three Hundred and Twenty Two only Eleven Thousand Five Hundred and Sixty Nine only
20
ITEM CODE
Sl. No. e)
DESCRIPTION
Unit
RATES IN WORDS (RUPEES) Three Thousand Six Hundred and Seventy Seven only
291
292
f)
293
g)
294 295
h)
i)
296
j)
k) l) m) n)
301
XXIII 146
302 303
147
148
304 305
149
150
306
151
307
152
308
153
Providing and fixing at site circular shaped 470 mm dia Off White EACH coloured wash basin of Hindware/ Parryware make to be fixed in the Black Granite stone supported on 20 mm thk Kadappah stone slab, including cutting of Necessary hole in the granite stone, CP waste coupling, nickel plated copper connections, Bottle trap of jaquar make (catalogue no. 769. - B) / ESS - ESS (croma series) / AQUEL make etc complete with waste coupling JACQUAR make Catelogue No. 705, but excluding cost of Tap, angle cocks etc complete. (The wash basin shall be under counter type. Granite slab, cuddapah stone slab etc. will be paid for separately.) (No extra payment will be made for cutting opening in granite slab). Providing and fixing at site Jacquar make Pillar cock long neck with EACH aerator (contnental series) Catalogue No. 021 / ESS-ESS (croma series) / AQUEL(deleno) make or equivalent make approved by IOCL be fixed at site including all necessary fittings etc complete. Providing & Fixing at site angle cock of Jacquar make ( Continental EACH Series) Catalogue No.053 / ESS-ESS (croma series) / AQUEL (deleno) make or equivalent make approved by IOCL, to be fixed below wash basins and other areas etc complete. Providing and fixing at site Jacquar make Stop cock (Continental EACH Series) Catalogue No.083 / ESS-ESS (croma series) / AQUEL make or equivalent make approved by IOCL as required. Providing and fixing at site bib cock jacquar make (Continental Series) EACH Catalogue NO.107 / ESS-ESS (croma series) / AQUEL(deleno) make or equivalent make approved by IOCL to be fixed at stte including all materials, labour etc complete. Providing and Fixing Metropole concelled Flush Valve Brass Chrome EACH finished Plumbing Fittings: Make: Jacquar (Continental Series) Catalogue No.1081A, Ess Ess (Chroma Series), Aquel (deleno), or equivalent make approved by IOCL. Providing & fixing SS / finish Toilet Paper Holder - Jaguar (continental) / EACH aquel (deleno) or equivalent make approved by IOCL. Providing & fixing SS / finish rob hook - Jaguar (continental) / aquel EACH (deleno) or equivalent make approved by IOCL. Providing & fixing Liquid Soap Dispenser Colgate Pamolive make or EACH Eqiuivalent approved by IOCL. Providing & fixing Electrically Operated Hand Drver System on wall EACH near Wash Basin area of make Technocrat or Equivalent approved by IOCL. PAINTING Providing & painting with two coats of cement paint of approved brand SQM and manufacture on new plastered surface over two coats of white cement after preparing the surface including necessary scrapping, cleaning, scaffolding, curing, etc. complete. Providing & painting with two coats cement paint of approved brand and SQM manufacture on old wall surface after necessary washing, cleaning, curing etc. complete Providing & painting with acrylic distemper two coats on new surfaces SQM over one coat of cement primer with 2 coats of putty etc. including necessary scraping, cleaning, scaffolding etc., complete Providing & painting one coat Acrylic distemper for the old surfaces SQM after scrapping and cleaning the existing surface as directed by IOCL including scaffolding etc. complete. Providing & painting two coats Acrylic distemper for the old surfaces SQM after scrapping and cleaning the existing surface as directed by IOCL including scaffolding etc. complete. Surface preparation, supplying & painting one coat of cement primer SQM and two coats of wall putty and two coats of interior acrylic emulsion paint for interior surfaces, as per specifications, and of approved colour and make, including scraping, scaffolding etc. complete. Surface preparation, supplying & painting one coat of interior acrylic SQM emulsion paint for interior surfaces as per specifications, and of approved colour and make including scraping & scaffolding etc. complete. Surface preparation,supplying & painting two coats of interior acrylic SQM emulsion paint for interior surfaces as per specifications, and of approved colour and make including scraping, scaffolding etc. complete.
787
584
950
Nine Hundred and Fifty only Eight Hundred and Ten only
810
1,916
One Thousand Nine Hundred and Sixteen only Six Hundred and Eighty Seven only Five Hundred and Nineteen only Two Hundred and Ninety Two only Six Thousand Five Hundred and Eighty One only Forty Eight only
48
35
87
16
Sixteen only
26
110
31
48
21
ITEM CODE
DESCRIPTION
Unit
Rate (Rs.) 39
309
310
155
311
156
312
157
313
158
Surface preparation, supplying & painting one coat of exterior acrylic SQM emulsion paint for exterior surfaces as per specifications and of approved colour and make including scraping, scaffolding etc. complete. Surface preparation, supplying & painting two coat of exterior acrylic SQM emulsion paint for exterior surfaces as per specifications and of approved colour and make including scraping, scaffolding etc. complete. Surface preparation, supplying & painting two coat of exterior acrylic SQM emulsion paint over one coat of cement primer for exterior surfaces as per specifications and of approved colour and make including scraping, scaffolding etc. complete. Providing and applying priming coat using two coats of white cement SQM after scrapping and cleaning the surface, using scaffolding, etc. complete. Providing painting with two coats of synthetic enamel paint over one SQM coat of cement primer on new plastered surfaces including cost of all materials, labour, scraping, scaffolding etc., complete. Providing painting with one coat of synthetic enamel paint on existing SQM cement plastered and painted surfaces including cost of all materials, labour, scraping, scaffolding etc., complete. Providing painting with two coats of synthetic enamel paint on existing SQM cement plastered and painted surfaces including cost of all materials, labour, scraping, scaffolding etc., complete Providing painting two coats synthetic enamel paint over two coats of SQM zinc phosphate primer on new steel work including cost of all material, labour, scraping, scaffolding, etc. complete Providing painting one coat synthetic enamel paint over one coat of zinc SQM phosphate primer for old steel surfaces after scrapping and cleaning the existing surface as directed by IOCL including scaffolding etc.complete Providing painting two coats synthetic enamel paint over one coat of SQM zinc phosphate primer for the old steel surfaces after scrapping and cleaning the existing surface as directed by IOCL including scaffolding etc. complete. Providing & painting with two coats of aluminum paint for steel surface SQM over two coats of zinc phosphate primer after cleaning the old paint, mill scale, rust, grease, etc. including scraping, scaffolding etc. complete. Providing & painting with two coats of aluminum paint for steel surface SQM over one coat of zinc phosphate primer after cleaning the old paint, mill scale, rust, grease, etc. including scraping, scaffolding etc. complete. Surface preparation, providing and applying spray painting with one coat SQM of metal primer (1litre/10m2), two coats of metal putty (1kg/5m2), one coat speedkote primer surfacer (1litre/10m2),and two coats of synthetic enamel paint (1litre/5m2) for canopy / building facia made of MS/Al. sheet including cost of all machineries, materials, labour, scaffolding etc., as per specifications and IOC colour scheme. Surface preparation, providing and applying spray painting, two coats of SQM synthetic enamel paint (1litre/5m2) for existing canopy / building facia made of MS/Al. sheet including cost of all machineries, materials, labour, scaffolding etc., as per specifications and IOC colour scheme. Surface preparation, providing and applying (spray painting), two coats SQM of polyurethene paint of approved make on MS canopy columns over necessary coats of ETCH primer, epoxy putty, primer surfacer, etc. as per manufacturers specifications, including cost of all machineries, materials, labour, scaffolding etc. as per directions of IOCL. Supplying and applying white lime wash three coats to give an even SQM shade including mixing specified quantity of gum and indigo to walls, ceiling etc. (last two coats with brush only), including cost & conveyance of all materials, labour etc. complete.
63
82
13
Thirteen only
58
159
25
160
39
161
63
317
162
38
318
163
51
319
164
59
320
165
47
321
166
232
322
167
121
323
168
432
324
169
Eight only
22
ITEM CODE
DESCRIPTION
Unit
Rate (Rs.)
a) b) c) d) e) 171
Writing name of Retail Outlet and location/Indian Oil Corporation monogram, other sign / slogans on building / glass of show window etc. of the following heights / diameters with vinyl sticker LG or 3M make of approved quality and shade. Letter of size upto 5 cms EACH Letter of size above 5 cms & upto 15 cms EACH Letter of size above 15 cms & upto 25 cms EACH Letter of size above 25 cms & upto 70 cms Indian Oil Corporation Monogram upto 45 cm dia. EACH EACH
172
Lettering NO SMOKING, AIR, WATER, TOILET, FIRST AID, etc. EACH (Local language / English), as per drawings and as directed by IOCL. (Measurement will be for each word / set) Painting the following with two coats of approved synthetic enamel paint over one coat of zinc phosphate primer as per standard colour scheme including scrapping the old paint thoroughly as directed for the following Yard lighting pole including all fixtures EACH
Twenty Five only Forty only One Hundred and Sixty only Three Hundred and Twenty only Four Hundred and Fifty only One Hundred and Seventy Five only
331 332 333 334 335 336 337 338 339 340 341 342 343 344 345
a) b) c) d)
Y light pole / island light pole. EACH Painting the steel / show windows / ventilators (only one side SQM measurement) Repainting Chain link fencing and angle iron post with aluminium/ SQM synthetic enamel paint of approved shade (only one side measurement) Repainting of barbed wire fencing and angle iron posts with aluminium/ SQM synthetic enamel paint of approved shade etc complete. (only one side measurement) Chain link fencing with steel structure frame. (only one side SQM measurement) Painting structural steel canopy fabricated out of MS girders, MS SQM channels, MS angles etc. with two coats of synthetic enamel paint after scraping and cleaning the surface etc. complete. Fire bucket with stand / fire scoop including lettering as directed EACH Air Tower EACH Barrel stand EACH
Seven Hundred and Fifty only Six Hundred only One Hundred and Ten only Ninety only
e)
90
Ninety only
f) g)
90 73
h) i) j) k) l) m) n) o) 173 a) b) c) 174
Wooden / steel switch board with angle iron supports EACH Oil tank of hoist with connecting pipelines EACH Air compressor including motor, air receiver, compressor block, fan EACH guard etc. Diesel generator EACH Pump/Starter EACH Painting pipe lines with necessary colour coding as per directions of IOCL. 40/50mm dia Vent pipe EACH 80mm dia Vent pipe Dip & Fill pipe of tank Painting valves with 2 coats of synthetic enamel paint after cleaning etc. as per directions of IOCL. 80mm, 100mm, 150 mm 200mm to 350 mm Painting basket strainer with 2 coats of synthetic enamel paint after cleaning etc. as per directions of IOCL. 80mm, 100mm, 150 mm 200mm to 350 mm Providing and spray Painting miscellaneous items with two coats of synthetic enamel paint of approved make after scrapping old paint, cleaning the surface of mill scale, grease etc. over one coat of zinc phosphate primer including painting to colour code lettering etc. on following equipments. EACH EACH
Fifty only Three Hundred and Fifty only One Hundred and Fifty only Sevety Five only Two Hundred only Seven Hundred only One Thousand Two Hundred and Fifty only Three Hundred only
One Hundred and Fifty only Two Hundred only One Hundred and Fifty only
349 350
a) b) 175 a) b) 176
EACH EACH
300 400
351 352
EACH EACH
500 600
23
ITEM CODE
Sl. No. a)
DESCRIPTION
Unit
RATES IN WORDS (RUPEES) One Thousand Two Hundred and Fifty only
353
354
b)
355
c)
356
d)
357 358
e) f) 177 a)
Painting of mono/Duo dispensing pump with one coat of primer and two EACH coats of enamel paint with necessary putty and metal paste etc. on external surfaces including lettering in Hindi or English the name of products, monogram, colour bands etc using vinyl sticker LG or 3M make. Painting of Mono / Duo pumps - inner surface painted with one coat EACH metal primer and outside painted with one coat of primer and two coats of enamel paint with necessary putty, including lettering in Hindi or English the name of products, monogram, colour bands etc. using vinyl sticker LG or 3M make etc., complete. Painting of MPD pumps - with one coat of primer and two coats of EACH enamel paint with necessary putty and metal paste etc. on external surfaces, including lettering in Hindi or English the name of products, monogram, colour bands etc. using vinyl sticker LG or 3M make etc., complete. Painting of MPD pumps - inner surface painted with one coat metal EACH primer and outside painted with one coat of primer and two coats of enamel paint with necessary putty, including lettering in Hindi or English the name of products, monogram, colour bands etc. using vinyl sticker LG or 3M make etc., complete. Lettering of product names on dispensing units using vinyl stickers LG EACH or 3M make. Lettering in Hindi or English the name of products, monogram, colour EACH bands etc. using vinyl sticker LG or 3M make. Do same as item no. 176 but painting with brush. Painting of mono/Duo dispensing pump with one coat of primer and two EACH coats of enamel paint with necessary putty and metal paste etc. on external surfaces including lettering in Hindi or English the name of products, monogram, colour bands etc using vinyl sticker LG or 3M make etc., complete. Painting of Mono / Duo pumps - inner surface painted with one coat EACH metal primer and outside painted with one coat of primer and two coats of enamel paint with necessary putty, including lettering in Hindi or English the name of products, monogram, colour bands etc. using vinyl sticker LG or 3M make etc., complete. Painting of MPD pumps - with one coat of primer and two coats of EACH enamel paint with necessary putty and metal paste etc. on external surfaces, including lettering in Hindi or English the name of products, monogram, colour bands etc. using vinyl sticker LG or 3M make etc., complete. Providing and Painting miscellaneous items with two coats of synthetic enamel paint of approved make after thoroughly cleaning the surface on following items. Electrical panel board EACH APSEB meter board EACH Structural pole of scaled down signage. EACH Providing and spray Painting canopy false ceiling with two coats of SQM polyurethene paint of approved make after thoroughly cleaning the surface, including scaffolding etc. complete. PAINTING OF KSK SIGNAGE Providing and spray painting KSK Signage with two coats of synthetic EACH enamel paint of approved make after scraping and thoroughly cleaning the surface, applying metal putty for joints and MC putty for entire surface of signage, including scaffolding etc. complete. Supplying and pasting of vinyl stickers for IOCL emblem and product EACH display on both sides of KSK signage, including all labour charges, transportation, scaffolding, sundries etc. complete. DISMANTLING Removing the existing 150/300 mm dia U/G R.C.C Hume pipes RM including necessary excavation in earth/soil and back filling the trench including proper consolidation etc. complete. Dismantling the existing brick masonry work and disposing off the CUM debris to an unobjectionable place.
1,500
1,500
1,750
200 500
359
1,000
360
b)
1,250
361
c)
1,250
178
a) b) c) 179
One Thousand Two Hundred only Three Hundred only Six Hundred only One Hundred and Fifty only
366
180 a)
4,500
367
b)
14,500
368 369
XXIV 181
54
182
255
24
ITEM CODE
DESCRIPTION
Unit
RATES IN WORDS (RUPEES) Two Hundred and Forty Eight only Two Hundred and Sixty only Three Hundred and Ninety Six only Eighteen only
186
Dismantling the existing rubble masonry work and disposing off the CUM unserviceable materials to an unobjectionable place. Dismantling the existing PCC work and disposing off the debris to an CUM unobjectionable place. Dismantling the existing RCC work and disposing off the debris to an CUM unobjectionable place. All reinforcement steel shall be the property of the contractor Removing existing AC / GI / Galvalume / klippon sheets on the structure SQM of roof / cladding etc. including providing necessary scaffoldings / ladders, stacking serviceable materials and transportation and disposal of the damaged sheets etc. complete as directed by IOCL. Relaying the dismantled (supplied) AC / GI / Galvalume sheets on the SQM structure of roof / cladding etc. including suplying and providing necessary hardwares & accessories for fixing, etc. complete as per the directions of IOCL. Removing existing 150 F/ 200 F / 180 C metallic false ceiling in canopies and stacking of the serviseable materials and disposal of damaged materials as directed by IOCL including providing necessary scaffoldings / ladders, labour charges etc. complete. For area measuring less than 50 sq.m. (under a single canopy) SQM For area measuring more than 50 sq.m. (under a single canopy) SQM Fixing departmentally supplied 150 F/ 200 F / 180 C metallic false SQM ceiling in canopies as directed by IOCL including suplying necessary hardwares & accessories for fixing, providing necessary scaffoldings / ladders, labour charges etc. complete. Removing and refixing 150 F/ 200 F / 180 C metallic false ceiling in SQM canopies as directed by IOCL including suplying necessary hardwares & accessories for fixing, providing necessary scaffoldings / ladders, labour charges etc. complete. (Extra care should be taken to see that the false ceiling panels are not damaged. Damages if any for the false ceiling panels are to be made good by the contractor at his own cost. No extra payment will be made for rectifying / replacing the damaged false ceiling panels). Cutting the existing mild steel structural such as RS Joists, angles, KG channels, 'I'-sections MS plates, chequered plates, etc. with gas cutting, stacking of the serviseable materials and disposal of damaged materials as directed by IOCL including providing necessary scaffoldings / ladders, labour charges etc. complete. Erection of departmentally supplied mild steel structural such as RS KG Joists, angles, channels, 'I'-sections MS plates, chequered plates, etc. including providing necessary welding, scaffoldings / ladders, labour charges etc. complete. Dismantling existing steel/wooden doors, windows, ventilators, louvers SQM and disposal of the debris as directed by IOCL. Dismantling Paver Blocks Removing the paver blocks and stacking at the RO premises as per the SQM directions of IOCL including all leads and lifts Removing the paver blocks and underlying sand cushion including SQM stacking at the RO premises as per the directions of IOCL including all leads and lifts Laying the supplied paver blocks (after repairs to the underlaying SQM driveway) including spreading/laying, levelling the supplied sand, including supplying & providing additional sand, if required (thickness of sand bedding not to exceed 50mm) etc complete. The rate is inclusive of cutting the paver block wherever required with hydraulic splitter, filling the joints at the edges of paver blocks with sand, compacting with machine vibrator to required line & level etc. complete, (Repairs to driveway, PCC edge restraint etc. shall be measured and paid separately).
18
374
187
39
188
a) b) 189
9 8 66
378
190
75
379
191
Four only
380
192
10
Ten only
381
193 194 a) b)
38
382 383
41 49
384
195
80
Eighty only
25
ITEM CODE
DESCRIPTION
Unit
Rate (Rs.) 68
385
Laying the supplied paver blocks (after repairs to the underlaying SQM driveway) including spreading/laying, levelling the supplied sand, including supplying & providing additional sand, if required (thickness of sand bedding not to exceed 50mm) etc complete. The rate is inclusive of cutting the paver block wherever required with hydraulic splitter, filling the joints at the edges of paver blocks with sand, compacting manually to required line & level etc. complete, (Repairs to driveway, PCC edge restraint etc. shall be measured and paid separately). Dismantling the existing Water Bound Macadam including carting away M3 and disposing all the debris away from the site with all leads and lifts as per the directions of IOCL. Dismantling granite slabs / granite tiles / marble slab on wall, floor, SQM pump Island etc. and stacking of the serviceable materials and disposal of damaged materials as directed by IOCL including all charges etc. complete. Laying of dismantled granite slab / granite tiles / marble slab over pump Island, wall, floor etc. including bedding in cement mortar 1:4, 20mm / 12 mm thick as per standard drawings and cost of all material and labour etc., complete. Dismantling the existing glazed / vitrified tiles over wall, floor, pump Island etc. and stacking of the serviseable materials and disposal of damaged materials as directed by IOCL including all charges etc. complete. RO NAME BOARD Providing and fixing RO name board 4 ft x 2 ft with ACM sheet and reflective vinyl stickers (letter height 15 cms) including routing and bending the ACM sheet, pasting the vinyl stickers, transporting, fixing, all labour charges, sundries, etc. complete. LANDSCAPING Surface preparation, turfing the area with Mexican grasspods in sheet form, adding manure and all works as per detailed specification. SQM
386
197
95
387
198
58
388
199
326
389
200
SQM
26
390
201 a)
EACH
2,788
391
202 a)
SQM
489
Four Hundred and Eighty Nine only Four Hundred and Forty Five only
392
b)
393
c)
Providing Aricca Palms of average height 1.80m to 2.00m including EACH making pit of suitable size, filling the pit with mixture of red earth and dung manure, nurturing the plant by watering, pest control, etc., excluding the cost of red earth Providing Duranta Gold of average height 0.10m including making pit of EACH suitable size, filling the pit with mixture of red earth and dung manure, nurturing the plant by watering, pest control, etc., excluding the cost of red earth
445
17
Seventeen only
SL NO. 1.A
DESCRIPTION Installation of supplied 5 KL Tank as per specified drawings & as per work description. In earth pit with RCC strip raft as per Drg. No. IOC/FEATS/CAPEX/801 In earth pit with RCC mat raft as per Drg. No. IOC/FEATS/CAPEX/802 In brick/stone masonry pit with RCC strip raft & blocks under driveway including RCC top slab as per Drg.No. IOC/FEATS/CAPEX/803 In brick/stone masonry pit with RCC mat raft & blocks under driveway including RCC top slab as per Drg.No. IOC/FEATS/CAPEX/804 Handling, installing tank on brick/stone masonry chairs, excluding all civil works & steel structure works
UNIT
RATE(Rs.)
501 502
i ii iii iv v 1. B
Thirty One Thousand and One only Sixty Thousand Three Hundred and Sixty Eight Only One Lac Forty Thousand Seven Hundred and Fourteen only One Lac Fifty Eight Thousand Two Hundred and Sixty only Nine Thousand One Hundred and Seventy Four only
503
504
505
Installation of supplied 10 KL Tank as per specified drawings & as per work description In earth pit with RCC strip raft as per Drg. No. IOC/FEATS/CAPEX/805 In earth pit with RCC mat raft as per Drg. No. IOC/FEATS/CAPEX/806 In brick/stone masonry pit with RCC strip raft & blocks under driveway including RCC top slab as per Drg.No. IOC/FEATS/CAPEX/807 EACH EACH EACH 68052 84793 194590
Sixty Eight Thousand and Fifty Two only Eighty Four Thousand Seven Hundred Ninety Three only One Lac Ninety Four Thousand Five Hundred and Ninety only
506 507
i ii iii
508
26
ITEM CODE
Sl. No.
iv v 1.C
DESCRIPTION
In brick/stone masonry pit with RCC mat raft & blocks under driveway including RCC top slab as per Drg.No. IOC/FEATS/CAPEX/808
Unit
Rate (Rs.)
231791 9835
509 510
EACH
Handling, installing tank on brick/stone masonry chairs, excluding all civil EACH works & steel structure works Installation of supplied 15 KL Tank as per specified drawings & as per work description In earth pit with RCC strip raft as per Drg. No. IOC/FEATS/CAPEX/809 In earth pit with RCC mat raft as per Drg. No. IOC/FEATS/CAPEX/810 In brick/stone masonry pit with RCC strip raft & blocks under driveway including RCC top slab as per Drg.No. IOC/FEATS/CAPEX/811 In brick/stone masonry pit with RCC mat raft & blocks under driveway including RCC top slab as per Drg.No. IOC/FEATS/CAPEX/812 EACH EACH EACH EACH
511
i ii iii iv
Ninety Thousand Two Hundred and Ninety Four only One Lac Thirteen Thousand Six Hundred and Fifty Three only Two Lac Forty Two Thousand Seven Hundred and Eighty only Two Lac Eighty Two Thousand Eight Hundred and Twenty Five only Eleven Thousand Five Hundred and Eighty Seven only
512
513
514
515
v 1.D
Handling, installing tank as per standard Drg. ENG/311-1/2 &2/2 on brick masonry chairs. Payment for all civil & steel structure shall be paid EACH separately. Installation of supplied 20 KL Tank as per specified drawings & as per work description. In earth pit with RCC strip raft as per Drg. No. IOC/FEATS/CAPEX/813 In earth pit with RCC mat raft as per Drg. No. IOC/FEATS/CAPEX/814 In brick/stone masonry pit with RCC strip raft & blocks under driveway including RCC top slab as per Drg.No. IOC/FEATS/CAPEX/815 In brick/stone masonry pit with RCC mat raft & blocks under driveway including RCC top slab as per Drg.No. IOC/FEATS/CAPEX/816 EACH EACH EACH EACH
11587
516
i ii iii iv
517
518
519
520
v 1.E
Handling, installing tank as per standard Drg. ENG/311-1/2&2/2 on brick masonry chairs. Payment for all civil & steel structure shall be paid EACH separately. Installation of supplied 50 KL Tank as per specified drawings & as per work description. In earth pit with RCC strip raft as per Drg. No..IOC/FEATS/CAPEX/817 In earth pit with RCC matt raft as per Drg. No.IOC/FEATS/CAPEX/818 EACH EACH
12997
One Lac Seven Thousand Five Hundred and Eighteen only One Lac Forty Thousand Five Hundred and Seventy Seven only Two Lac Ninety Five Thousand Three Hundred and Nine only Three Lac Ninety One Thousand Five Hundred and Forty Seven only Twelve Thousand Nine Hundred and Ninety Seven only
521
522
523
iii iv
In brick masonry pit with RCC strip raft under driveway including RCC top EACH slab as per Drg. No.IOC/FEATS/CAPEX/819 In brick masonry pit with RCC matt raft under driveway including RCC top EACH slab as per Drg. No.IOC/FEATS/CAPEX/820 Handling, installing tank as per standard Drg. ENG/326-1/2&2/2 on brick masonry chairs. Payment for all civil & steel structure shall be paid EACH separately. Installation of supplied 70 KL Tank as per specified drawings & as per work description In earth pit with RCC strip raft as per Drg. No.IOC/FEATS/CAPEX/821 In earth pit with RCC matt raft as per Drg. No.IOC/FEATS/CAPEX/822 EACH EACH
524
One Lac Sixty Seven Tousand Seven Hundred and Fifty Eight only Two Lac Fifty Seven Thousand Five Hundred and Forty only Four Lac Thirty Five Thousand Six Hundred and Fifty Four only Five Lac Sixty Four Thousand Two Hundred and Twenty Two only Twenty Two Thousand One Hundred and Eight only
525
v 1.F
22108
526
i ii iii iv
Two Lac Twenty One Tousand Two Hundred and Ninety Six only Three Lac Fifty Thousand Six Hundred and Forty Four only Five Lac Seventy Four Thousand Six Hunderd and Twenty Nine only Seven Lac Thirty Nine Thousand Three Hundred and Fifty Four only Twenty Nine Thousand Five Hundred and Seventy Three only
527
528
In brick masonry pit with RCC strip raft under driveway including RCC top EACH slab as per Drg. No.IOC/FEATS/CAPEX/823 In brick masonry pit with RCC matt raft under driveway including RCC top EACH slab as per Drg. No.IOC/FEATS/CAPEX/824 Handling, installing tank as per standard Drg. ENG/326-1/2 &2/2 on brick masonry chairs. Payment for all civil & steel structure shall be paid EACH separately. PIPING AND ALLIED WORKS Supply, fabrication, handling,laying and testing of MS, BLACK, ERW, threaded pipes, CLASS B conforming to IS 1239, PART I as per IOCL specifications including forged fittings like bends, tee etc as required and as directed
529
530
v 2
29573
27
ITEM CODE
Sl. No.
i
DESCRIPTION
Underground pipeline including doping as specified in detailed description. 100mm dia 80mm dia 50 mm dia 40 mm dia Aboveground pipeline including painting as specified in detailed description. 100mm dia 80mm dia 50 mm dia 40 mm dia Supply, fabrication, handling,laying and testing of MS, BLACK, ERW, threaded pipes, CLASS C conforming to IS 1239, PART I as per IOCL specifications including forged fittings like bends, tee etc as required and as directed Underground pipeline including doping as specified in detailed description. 100 mm dia 80 mm dia. 50 mm dia. 40 mm dia Aboveground pipeline including painting as specified in description. 100 mm dia 80 mm dia 50 mm dia 40 mm dia Supply, fabrication,welding, handling, laying and testing of MS Black, CLASS C welded pipes conforming to IS 1239 and as per IOCL specifications including forged fittings like bends, tees etc as required by IOC and as directed. Underground pipeline including doping as described in detailed description with forged fittings like bends, tees etc 100mm dia 80mm dia 50mm dia 40mm dia Aboveground pipeline with forged fittings like bends, tees etc and including painting as specified in detailed description. 100 mm dia 80 mm dia 50 mm dia 40 mm dia detailed
Unit
Rate (Rs.)
a b c d ii
RM RM RM RM
One Thousand and Four only Seven Hundred and Thirteen only Five Hundred and Forty Seven Only Four Hudred and Eight only
a b c d
RM RM RM RM
Eight Hundred and Fifty One only Six Hundred and Fifty Four only Four Hundred and Ninety Nine only Three Hundred and Seventy only
i
539 540 541 542
a b c d ii
RM RM RM RM
One Thousand One Hundred and Sixty Two only Eight Hundred and Fourteen only Six Hundred and Thirty Seven only Four Hundred and Seventy Seven only
a
b
RM RM RM RM
One Thousand and Nine only Seven Hundred and Fifty Five only Five Hundred and Eighty Nine only Four Hundred and Thirty Nine only
c d 4
i
547 548 549 550
a b c d ii
RM RM RM RM
One Thousand Two Hundred and Twenty only Eight Hundred and Eighty only Six Hundred and Ninety Three only Five Hundred and Twenty Two only
a b c d
RM RM RM RM
One Thousand One Hundred and Fifty One only Eight Hundred and Twenty Four only Six Hundred and Fifty Five only Four Hudred and Ninety Four only
Fabrication,handling,laying and testing of Corporation supplied MS, ERW,ClassB/C threaded pipes, as per IOCL specifications including forged fittings like bends, tee etc as required and as directed. . Underground pipeline including specification . 100mm doping as specified in detailed RM 349
Three Hundred and Forty Nine only
i
555
28
Sl. No.
b c d ii 80 mm dia. 50 mm dia. 40 mm dia
DESCRIPTION
Unit
RM RM RM
Rate (Rs.)
257 185 148
Aboveground pipeline including painting as specified in detailed description. 100mm 80 mm dia 50 mm dia 40 mm dia Fabrication,handling welding laying and testing of CORPORATION SUPPLIED MS ERW Class B/C welded pipes as per IOCL specifications including pipeline fittings like bends,tees,etc.as required and as directed. Underground pipeline including doping as per detailed specifications. 150 mm 100 mm dia 80 mm dia 50 mm dia 40 mm dia Aboveground pipeline including painting as per detailed specifications. 150 mm 100 mm dia 80 mm dia 50 mm dia 40 mm dia Supply, laying, welding, connecting and commission-ing of Flexible piping system underground of approved make having CCOE approval, for suction , fill or vent pipes at retail outlets.Compatible pipe fittings as per manufacturer's specifications shall be used, which will be measured and paid for separately. Rate does not include civil works such as excavation, backfilling etc. RM RM RM RM RM 506 327 248 190 163
Five Hundred and Six only Three Hundred and Twenty Seven only Two Hundred and Fourty Eight only One Hundred and Ninety only One hundred and Sixty Three only
a b c d 6
RM RM RM RM
Two Hundred and Ninety Seven only Two Hundred and Fifteen only One Hunded and Fifty Seven only One Hundred and Fourteen only
i
563 564 565 566 567
a b c d e ii
RM RM RM RM RM
Five Hundred and Sixty Six only Four Hundred and Five only Three Hundred and Four only Two Hundred and Twenty Four only One Hundred and Ninety Three only
a b c d e
573
i ii iii iv v vi
vii viii ix x
Suction & Vent pipes - 63mm (OD) , flexible pipe of approved make having approvals of EN14125 , EN13463-1 standards & CCOE approval. Should withstand working pressure of 10bars & Burst pressure of 45 Bars. Fill pipe - 110mm ( OD) , flexible pipe of approved make having approval of EN14125, EN13463-1 standards & CCOE approval. Supply & installation of welding socket 63mm of approved make for welding flexible suction pipes. Should be compatible for fusion welding on site & have EN14125 certification & CCOE approval. S & F 90 deg. formed bends 63mm (OD) for connecting flexible pipes, EN14125 approval. S&F 45 deg. 63mm (OD) for connecting flexible pipes, EN14125 approval. S & F conductive 'T' Joints 63mm (OD) of aproved make for connecting flexible pipes, EN14125 approval. S & F Flexible pipe to metal flange for connecting flexible pipes ( 63mm OD) to metal fittings on tank. EN14125 approval. S & F Flexible pipe to Dispenser end connection ( Brass Fitting) for connecting flexible pipes ( 63mm OD) to suction inlet of dispenser. EN14125 approval. S&F flexible pipe to vent end connection ( Brass fitting) for connecting flexible pipes ( 63mm OD) to vent end connection. EN14125 approval. S & F Flexible pipe to metal flange for connecting flexible pipes (110 mm OD) to metal fittings on tank. EN14125 approval. Supply & installation of welding socket 110mm for welding flexible fill pipes. Should be compatible for fusion welding on site & have EN14125 certification & CCOE approval.
RM
674
Six Hundred and Seventy Four only One Thpusand Three Hundred and Fourty Seven only Eight Hundred and Seventeen only One Thousand One Hundred and Twenty One only Seven Hundred and Twenty Six only One Thousand Seven Hundred and Twenty Eight only Two Thousand Four Hundred and Fourteen only Two Thousand Four Hundred and Eighty Five only Two Thousand One Hundred and Fifty Five only Four Thousand Three Hundred and Twenty One only One Thousand Five Hundred and Thirty Seven only
574
RM
1347
583
xi
EACH
1537
29
Sl. No.
xii xiii xiv
DESCRIPTION
S & F 90 deg. formed bends 110mm (OD) for connecting flexible pipes, EN14125 approval. S&F 45 deg. 110mm (OD) for connecting flexible pipes, EN14125 approval. S&F flexible pipe to fill pipe end connection ( Brass fitting) for connecting flexible pipes ( 110mm OD) to vent end connection. EN14125 approval.
Unit
Rate (Rs.)
2313 1812 3535
a b c d e f 9
GI PIPELINES Supply and laying GI , Class B threaded pipes, for air/water conforming to IS 1239& IS 4736 including necessary fittings,painting,etc. as required and as directed 80mm dia 50mm dia 40mm dia 25mm dia 20mm dia 15mm dia Supply and welding of forged butt weld MS fittings such as bends, tees, 200 mm X 100 mm Tee 200 mm X 80 mm Tee 100 mm dia - 90 degree bend 100 mm dia - 45 degree bend 100 mm X 100 mm Tee 100 mm X 80 mm Tee 100 mm X 50 mm Tee 100 mm X 40 mm Tee 80 mm dia - 90 degree bend 80 mm dia - 45 degree bend 80 mm X 80 mm Tee Supply and welding of forged MS Concenric & Eccentric reducers of following sizes 200x100mm 150x100mm 100x80mm 80x50mm 50x40mm Supply & welding slip-on flanges conforming to ASTM A-105 GrA, ANSI B16.5, Class 150 with 3 runs of weld outside and one run of weld inside the flanges as per specifications and standard Drg.enclosed herein 150 mm 100 mm dia. 80 mm dia 50 mm dia. 40 mm dia. Supply and fixing of Blind Flanges conforming to ASTM A-105, Gr A, ANSI B 16.5, Class 150 as per specs including making the flanged joint with 3 mm thick CAF gaskets,bonding with 3mm dia. copper wire, nuts & bolts of carbon steel etc. 150 mm
RM RM RM RM RM RM
Six Hundred Thirty Six only Four Hundred and Seven only Three Hundred and Twelve only Two Hundred and Eighteen only One Hundred and Fifty Three only One Hundred and Twenty Three only
593 594 595 596 597 598 599 600 601 602 603
a b c d e f g h I j k 10
EACH EACH EACH EACH EACH EACH EACH EACH EACH EACH EACH
4118 3859 994 814 1266 1212 1157 1094 711 610 872
Four Thousand One Hundred and Eighteen only Three Thousand Eight Hundred and Fifty Nine only Nine Hundred and Ninety Four only Eight Hundred and Fourteen only One Thousand Two Hundred and Sixty Six only One Thousand Two Hundred and Twelve only One Thousand One Hundred and fifty Seven only One Thousand Ninety Four only Seven Hundred and Eleven only Six Hundred and Ten only Eight Hundred Seventy Two only
a b c d e 11
One Thousand Four Hundred only Eight Hundred and Twenty Seven only Four Hundred and Fourty Nine only Three Hundred and Sixty Seven only Two Hundred and Fourty only
a b c d e 12
One Thousand Six Hundred and Seventy Five only One Thousand Two Hundred and Seventy Two only Eight Hundred and Twenty four only Five Hundred and Seventy only Four Hundred and Fourty Two only
a
614 615
EACH EACH
1792 1296
One Thousand Seven Hundred and Ninety Two only One Thousand Two Hundred and Ninety Six only
100 mm dia.
30
Sl. No.
c d e 13 80 mm dia. 50 mm dia. 40 mm dia.
DESCRIPTION
Unit
EACH EACH EACH
Rate (Rs.)
959 551 463
Welding of corporation supplied slip-on flanges with 3 runs of weld outside and one run of weld inside the flanges as per specifications. 150 mm 100 mm dia. 80 mm dia 50 mm dia. 40 mm dia. Supply and welding of special slip on flanges for inlet of power pump. 150 mm dia pipeline. 100 mm dia pipeline. 80 mm dia pipeline. Cutting of slip on flanges from old pipe and reboring the same to nominal diameter. 150 mm dia 100 mm dia 80 mm dia 50 mm dia EACH EACH EACH EACH 466 299 216 161
Four Hudred and Sixty Six only Two Hundred and Ninety Nine only Two Hundred and Sixteen only One Hundred and sixty One only
a b c d e 14
Three Hundred and Sixty Seven only Three Hundred and Thirty Five only Two Hundred and Sixty Two only Two Hundred and Three only One Hundred and Seventy only
a b c 15
One Thousand One Hundred and Fifty Six only Seven Hundred and Fourty Two only Five Hundred and Forty Five only
a b c d 16
a b c d e 17
Making flanged joints between slip on flanges, blind flange etc. including providing/supplying 3 mm thick CAF gasket, carbon steel nuts, bolts, bonding with 3 mm dia copper wire etc.complete as per IOCL specifications. 150 mm dia EACH 100 mm dia. 80 mm dia. 50 mm dia. 40 mm dia. Supplying and fixing MS basket strainers of the following sizes suitable for flow rate of 1200 lpm(max) for line size 100NB and 2400 LPM for 150 NB. The design pressure shall be 15 kg/sq.cm. and the mesh shall be of SS material. Rate includes making flange connections at both ends and painting to the required colour coding. 150mm dia 100mm dia EACH EACH EACH EACH EACH EACH
Five Hundred and Sixteen Three Hundred and Sixty Five only Two Hundred and Sixty Three only Two Hundred and Six only One Hundred and Fifty Five only
636 637
a b
34370 18271
Thirty Four Thousand Three Hundred and Seventy only Eighteen Thousand Two Hundred and seventy One only
18 i a b
639
Supply and installation of screwed type GM body gun metal seating valves as per IOC specifications GATE VALVES 50 mm dia. 40 mm dia. EACH EACH 3707 2329
Three Thousand Seven Hundred and Seven only Two Thousand Three Hundred and Twenty Nine only Two Thousand Nine Hundred and Fourty Eight only Two Thousand and Eighty Two only Two thousand Four Hundred and Twenty Four only One Thousand Six Hundred and Fourty Six only
638
640 641
ii a b iii a b
CHECK VALVES Horizontal 50 mm dia 40 mm dia CHECK VALVES Vertical 50 mm dia 40 mm dia EACH EACH 2424 1646 EACH EACH 2948 2082
642 643
31
ITEM CODE
Sl. No.
iv a CHECK VALVES Angular 50 mm dia b v a 40 mm dia BALL VALVES 50 mm dia b 40 mm dia
DESCRIPTION
Unit
Rate (Rs.)
644 645
EACH EACH
3437 2309
646 647
EACH EACH
3682 2474
19
648 649
Supplying and fixing of CI body with GM / neoprene seating screwed angular / horizontal type check valves 50 mm dia 40 mm dia EACH EACH 1428 1185
One Thousand Four Hundred and Twenty Eight only One thousand One Hundred and Eighty Five only
I ii 20 i a b ii a b
Supply and installation of flanged,150 class,cast steel valves as per specifications including making flanged joints at both ends. FLANGED CS GATE VALVES 100 mm dia 80 mm dia FLANGED CS BALL VALVES 80 mm 50 mm dia EACH EACH 13106 7374
Thirteen Thousand One Hundred and Six only Seven Thousand Three Hundred and Seventy Four only Twenty Two Thousand Two Hundred and Nine only Sixteen Thousand Six Hundred and Eighty Five only
650 651
EACH EACH
26465 18023
Twenty Six Thousand Four Hundred and Sixty Five only Eighteen Thousand and Twenty Three only
652 653
654 655
iii a b
FLANGED CS CHECK VALVES 100mm dia 80mm dia EACH EACH 22209 16685
21
656 657
i a b ii a b 22 i a b ii a
Installation of supplied class 150, flanged CS valves including making flanged joint with all labour, gaskets, nuts, bolts, all materials etc. complete FLANGED C S GATE/CHECK VALVES 100 mm dia 80 mm dia FLANGED C S BALL VALVES 80 mm dia 50 mm dia Supplying and installation of the following tank fittings conforming to detailed specification Caps 50 mm dia for dip pipe 80 mm dia.for fill pipe Bush 100 x 80 mm EACH EACH EACH 1371 992 647
One Thousand Three Hundred and seventy One only Nine Hundred and Ninety Two only Six Hundred and Fourty Seven only One Hundred and Ninety Three only One Hundred and Thirty Three only One Hundreed and Twelve only Five Hundred and Thirty Eight only
EACH EACH
1179 895
One Thousand One Hundred and Seventy Nine only Eight Hundred and Ninety Five only Nine Hundred and Twelve only Six Hundred and Sixty Two only
658 659
EACH EACH
912 662
660 661
EACH EACH
245 319
Two Hundred and Fourty Five only Three Hundred and Ninteen only
b c iii a b c iv a
668
EACH
538
32
Sl. No.
b c v a b c vi a b vii 50 mm dia. 40 mm dia. Union 80 mm 50 mm
DESCRIPTION
Unit
EACH EACH
Rate (Rs.)
359 273
40 mm union for dispensing pump Aluminium camlock coupling as per Drg.No.IOC/CAPEX/330 80 mm dia Aluminium camlock coupling with male adaptor and cap. 80 mm dia Aluminium camlock coupling with female coupler.
674 675
EACH EACH
651 1067
Providing locking arrangements to fill/dip pipes as per Drg.no.ENG/ 303 1/2 With clamp & lock 6 lever EACH 927 1562
Nine Hunderd and Twenty Seven only One Thousand Five Hundred and Sixty Two only One Thousand and Ninety Three only One Thousand Four Hundred and Thirty Eight only One Thousand Seven Hundred and Eighty Five only
678 679
ix a b
Permanite oil packing 600 mm dia 3mm thick for tank manhole EACH conforming to BS 1832/58 Aluminium dip rod For5/10/ 15/20 KL Tank For 50/70 KL Tank EACH EACH EACH
680
Turn buckle (set consists of 1 no. turn buckle, 2nos. Forged bolts) Supply and installation of U type MS forged bend (vent hood)on the vent pipes including painting as per specifications and supplying and brazing with brass wire mesh of 11 mesh per linear centi-meter in two layers on both ends. 80 mm dia 50 mm dia 40 mm dia Providing brass wire mesh 32 SWG, 11 mesh per linear cm of in two layers on existing vent hoods U type (on both ends) including brazing, etc. complete 80 mm dia 50 mm dia 40 mm dia Supplying and providing M.S. IS 1239,HEAVY pipe of suitable length for exhaust arrangement for diesel engine including fixing the supplied residential type silencer /muffler, clamping , providing asbestos rope insulation etc. 100 mm dia 80 mm dia 50 mm dia Supply & installation of pressure gauges 100 mm dial of range 0 to 15 Kg/Sq.Cm with dampener without dampener Supply and fixing of Silica Gel trap assembly made of acrylic / glass tube with silica gel as per standard drawings enclosed. 40mm dia 50mm dia Handling and installation of IOCL supplied flow meter as per manufacturers instructions including fixing supplied valves.(Structurals for supports and base plate shall be paid separately) 80mm dia
23
a b c 24
Four Hundred and Fifty Three only Three Hundred and Sixty Seven only Two Hundred and Eleven only
a b c 25
Two Hundred and Sixty Two only One Hundred and Eighty Three only One Hundred and Sixty One only
687 688
a b c 26
Five Thousand Three Hundred and Thirty Six only Three Thousand Seven Hundred and Thirty Five only Two Thousand Five Hundred and Eight only
689 690
a b 27
EACH EACH
1290 658
One Thousand Two Hundred and Ninety only Six Hundred and Fifty Eight only
691 692
a b 28
EACH EACH
2358 2501
Two Thousand Three Hundred and Fifty Eight only Two Thousand Five Hundred and One only
693
EACH
2070
33
ITEM CODE
Sl. No.
29
DESCRIPTION
INSTALLATION OF DISPENSING PUMPS/MPDs/MPPs Installation of supplied standard duty/ heavy duty mono dispensing pump on existing pump island as per IOCL's drawings and instructions including supplying /filling required quantity of dry sand in the pit(s) below the pump Including providing necessary anchor bolts and C.C. foundation Excluding providing necessary anchor bolts and C.C. foundation Installation of supplied standard duty duo dispensing pump on existing pump island as per IOCL's drawings and instructions including supplying /filling required quantity of dry sand in the pit(s) below the pump. Including providing necessary anchor bolts and C.C. foundation Excluding providing necessary anchor bolts and C.C. foundation Installation of supplied Multi Product Pumps / Dispensers on pump island as per manufacturers installation manual, drawings, including supplying, providing necessary frame of ISMC 100, foundation bolts, supplying and filling required quantity of dry sand in the pit(s) below the pump including necessary anchor bolts and CC foundation. 2 product - 4 nozzle MPPs/MPDs 3 product - 6 nozzle MPPs/MPDs
Unit
Rate (Rs.)
694 695
a b
EACH EACH
2127 578
Two Thousand One Hundred and Twenty Seven only Five Hundred and Seventy Eight only
30
696 697
a b 31
EACH EACH
2228 679
Two Thousand Twio Hundred and Twenty Eight only Six Hundred and Seventy Nine only
698 699
a b
EACH EACH
3170 3372
Three Thousand One Hundred and Seventy only Three Thousand Three Hundred and Seventy Two only
32
700
Installation of supplied Multi Product non space Pumps / Dispensers 2 Product - 2 display EACH 5977
Five Thousand Nine Hundred and Seventy Seven only
33
Air compressor Supply and installation of horizontal air compressor assembly with delivery pressure of 12 kg/sq cm (g) equipped with pressure gauge, nonreturn/safety/drain/delivery valves, automatic cut-off switch and suitable electrical connections & all standard accessories.
a b c 34 i ii
2 HP (100/160 LITRES) Single/Three phase 3 HP (160/200 LITRES) Three phase 5 HP (220/300 LITRES) Three phase
Thirty Nine Thousand One Hundred and Five only Forty Four Thousand Eight Hundred and Forty Four only Sixty Nine Thousand One Hundred and Nine only
MECHANICAL TYRE INFLATOR Supply and installation of Mechanical Tyre Inflator Air Tower assembly. 0 to EACH 100 psi range. Supplying and fixing of hose(6mm ID) assembly for Mechanical Air tower. EACH
Nine Thousand Fifty Six only Three Thousand Five Hundred and Eighty Nine only Six Hundred and Twelve only Four Hundred and Twelve only
iii iv 35
Supplying and fixing of hand control valve for Mechanical Air tower hose EACH assembly. Supplying and fixing of end double foot end connector for Mechanical Air EACH tower hose assembly Supplying & fixing braided rubber hose of approved make suitable for oil installation. The pipe should have continuity for earthing etc. as per the specification. 50 mm dia without end flanges 80 mm dia with end flanges Transportation of equipment from one location to another location including enroute all taxes, levies and unloading by a suitable vehicle exclusively for this purpose (tank shall be loaded by the tank fabrication contractor: loading charges included for all other items) 5/10 KL Tank with fittings 0 - 30 Km Add extra for every additional Km above 30 km 15/20 KL Tank with fittings LS KM RM RM
708 709
a b 36
838 1057
Eight Hundred and Thirty Eight only One Thousand Fifty Seven only
a
710 711
i ii b
2990 22
Two Thousand Nine Hundred and Ninety only Twenty Two only
34
Sl. No.
i ii c i ii d 0 - 30 Km
DESCRIPTION
Unit
LS KM LS KM
Rate (Rs.)
3910 33 11500 86
Add extra for every additional Km above 30 km 50/70 KL Tanks with fittings 0 - 30 Km Add extra for every additional Km above 30 km Mono pump/Duo pump/Air Compressor/All other pumps above 10 HP.( Each ) 0 - 30 Km Add extra for every additional Km above 30 km MPD pumps (Each) 0 - 30 Km Add extra for every additional Km above 30 km Fire extinguishers above 10 Kg mounted on trolley / All other pumps other than dispensing pumps upto 10 HP (Each) 0 - 30 Km Add extra for every additional Km above 30 km Exit/ Entry Signages/digital air gauge 0 - 30 Km Add extra for every additional Km above 30 km Facility Signage 0 - 30 Km Add extra for every additional Km above 30 km Scaled down signage 0 - 30 Km Add extra for every additional Km above 30 km Main Signage 0 - 30 Km Add extra for every additional Km above 30 km Transportation of miscellaneous items as directed by engineer - in charge including loading & unloading 0 - 30 Km Add extra for every additional Km above 30 km Either Loading or unloading by mechanical means for 5/10/15/20/ 50/70 KL tanks. 5/10 KL Tank 15/20 KL Tank 50/70 KL Tank Either loading or unloading charges for signages Exit/Entry signage Facility signage Scaled down signage Main signage Hydrostatic testing of MS pipeline complete as per IOC specification, incl supply of water and emptying out water after testing. 40/50mm dia MS pipeline 80mm dia MS pipeline. 100mm dia MS pipeline. 150mm dia MS pipeline. Testing the tank hydro-statically with sweet water, to a pressure of 0.50 Kg/Sq.cm. (Testing includes supplying, filling and emptying out the water after testing) cleaning the internal surface of the tank etc. complete. 5 KL Tank
714 715
716 717
i ii e i ii f
LS KM LS KM
1035 14 2185 22
One Thousand and Thirty Five only Fourteen only Two Thousand One Hundred and Eighty Five only Twenty Two only
718 719
i ii g i ii h i ii i i ii j i ii k
LS KM LS KM LS KM
Three Hundred and Forty Five only Eight only Four Hundred and Sixty only Eight only Eight Hundred and Five only Eight only One Thousand Seven Hundred and Twenty Five only Fourteen only Two Thousand and Three Hundred only Twenty two only
726 727
LS KM LS KM
1725 14 2300 22
728 729
730 731
i ii 37
LS/MT KM/MT
3910 6
i ii iii 38 i ii iii iv 39
Two Thousand Four Hundred and Fifteen only Three Thousand Six hUndred and Eighty only Five Thousand Nine Hundred and Eighty only Two Hundred and Fifty only Three Hundred and Forty Six only One Thousand Six Hundred and Sixty Eight only Two Thousand Seven Hundred and Forty Three only
i ii iii iv 40
RM RM RM RM
16 23 28 32
Sixteen only Twenty Three only Twenty Eight only Thirty Two only
743
EACH
2974
35
ITEM CODE
Sl. No.
ii iii iv v 10KL Tank 15KL Tank 20KL Tank 50 KL Tank 70 KL Tank vi 41 i
DESCRIPTION
Unit
Rate (Rs.)
3793 4613 5245 8965 11881
Doping of 5/10/15/20/50/70 KL Tank / Pipelines as per IOC specification & work description. Shalimastic - HD paint of Shalimar Tar Products or approved equivalent to be used. Tanks 5 KL Tank 10 KL Tank 15 KL Tank 20 KL Tank 50 KL Tank 70 KL Tank EACH EACH EACH EACH EACH EACH 2613 4215 5821 7139 12431 16574
Two Thousand Six Hundred and Thirteen only Four Thousand Two Hundred and Fifteen only Five Thousand Eight Hundred and Twenty One only Seven Thousand One Hundred and Thirty Nine only Twelve Thousand Four Hundred and Thirty One only Sixteen Thousand Five Hundred and Seventy Four only
a b c d e
755 756
f ii a b 42
PIPE DOPING/UNDERGROUND COATING WRAPPING Scraping and cleaning the external surface of pipeline and doping with Shalimastic H.D as per detailed specifications Scraping & cleaning the external surface of pipeline and U/G coating & wrapping as per detailed specifications Cleaning of internal surfaces of 5/10/15/20/50/70 KL Tank complete in all respects as per direction of site Incharge. 5 KL Tank 10 KL Tank 15 KL Tank 20 KL Tank 50 KL Tank 70 KL Tank 200 KL Tank Vertical tank up to 250 KL Tank Vertical tank above 250 kl & upto 400 KL Tank EMPTYING OUT PRODUCT FROM UNDER GROUND TANKS Removing dead stock from under ground tanks and emptying it including collecting the product in barrels supplied by the Corporation/dealer. It shall be ensured that no loss of product is taken place, while carrying out the job. The job will be carried out in the presence of Corporation and dealers representatives 5/10 KL Tank 15/20 KL Tank 50/70 KL Tank Supplying & Filling sweet water in the underground tank (5/10/15/20/50/70KL) to avoid floating of the tanks during monsoon, etc. as directed.
SQM SQM
82 664
Three Thousand Two Hundred and Eighty Four only Four Thousand and Sixty Nine only Five thousand Three Hundred and Sixteen only Five Thousand Nine Hundred and Sixty Seven only Ten thousand Seven Hundred and Eleven only Thirteen Thousand Six Hundred and Sixty Six only Thirty One thousand Eight Hundred and Twenty Five only Thirty Eight Thousand Two Hundred and Eighty Five only Fifty Thousand four Hundred and Three only
764 765
i ii iii b
Two Thousand Six Hundred and Thirty Two only Three Tousand Five Hundred and Eighty Three only Four Thousand Seven Hundred and Ten only
769
KL
220
36
ITEM CODE
Sl. No.
c
DESCRIPTION
Unit
Rate (Rs.)
Removing settled water carefully from U/G product tank with SR pump, in such a way that there is no loss of product. The water has to be thrown away and the product to be put back into the tank etc. complete. Upto a distance of 100 km from Div. Office Above 100 km from Div. Office DISMANTLING OF FACILITIES Exhuming of tanks of following capacities with fittings, including necessary civil works. 5 KL Tank 10 KL Tank 15 KL Tank 20 KL Tank EACH EACH EACH EACH EACH EACH 5812 9446 10277 11621 18378 24329
Five Thousand Eight Hundred and Twelve only Nine Thousand Four Hundred and Forty Six only Ten Thousand Two Hundred and Seventy Seven only Eleven Thousand Six Hundred and Twenty One only Eighteen Thousand Three Hundred and Seventy eight only Twenty Four Thousand Three Hundred and twenty Nine only
770 771
I ii
LS LS
2073 3462
Two Thousand and Seventy Three only Three Thousand Four Hundred and Sixty Two only
44
772 773 774 775
a b c d e
776
50 KL Tank 70 KL Tank f 45 i ii Installation of tanks in existing pit /foundation 5/10 KL Tanks with fittings 15/20 KL Tanks with fittings iii 46 50/70 KL Tanks with fittings Removing connected dispensing pump from pedestal including disconnection of pipeline, electrical connection, removal of nuts of the foundation bolts etc. complete. Mono/Duo pump MPD / MPP
777
Two Thousand Seven Hundred and Eight only Three Thousand Nine Hundred and Ninety One only Five Thousand Eight Hundred and Two only
781 782
a b
EACH EACH
476 750
Four Hundred and Seventy Six only Seven Hundred and Fifty only
47
Disconnecting, dismantling the existing pipeline both above/Under ground including excavating, breaking the enclosure walls, back filling & restoring the surface in original condition, disconnecting all the fittings, valves, strainers, filters, adjustable supports and all other fittings either by gas-cutting or hacksaw cutting after gasfreeing the lines, dismantling BM pedestals if required and stacking the dismantled pipes and fittings at site as directed Aboveground pipes 150 mm 100 mm dia Underground pipes 150 mm 100 mm dia Disconnecting, dismantling existing welded/screwed MS/GI pipeline both above/underground including dismantling of clamping or excavating, back-filling, restoring the surfaces into original condition, disconnecting all fittings, stacking the dismantled pipes/fittings at site as directed. 80 mm dia. 50 mm dia 40 mm dia 25 mm dia. 20 mm dia/ 15 mm dia. Dismantling of equipment including all accessories. Air compressor 2 to 5 HP EACH 1639
One Thousand Six Hundred and Thirty Nine only
i a b ii a b 48
RM RM RM RM
32 22 47 29
Thirty Two only Twenty Two only Forty Seven only Twenty Nine only
a b c d e 49
RM RM RM RM RM
30 21 16 13 11
Thirty only Twenty one only Sixteen only Thirteen only Eleven only
792
50 i
Dismantling of Signages and light poles from foundation Exit/Entry signage/Digital Air Gauge
EACH
206
37
Sl. No.
ii iii iv v vi vii 51 i ii iii iv v vi Facility signage Scaled down signage Main signage Y or 1/2 Y Island light pole Yard light pole Pole type emblem post
DESCRIPTION
Unit
EACH EACH EACH EACH EACH EACH EACH EACH EACH EACH EACH EACH EACH EACH
Rate (Rs.)
309 3295 4548 325 386 635 250 346 2720 3496 1668 2743 1377 1024
Erecting the following on existing foundation Exit/Entry signage Facility signage Scaled down signage Main signage Y or 1/2 Y Island light pole Yard light pole
vii
805 806
Pole type emblem post viii 52 Digital Air gauge(Corporation Supplied) Handling,assembling , installation,aligning and commissioning of corporation supplied pumping unit with motor of following capacities 750/900 LPM 1200/1500 LPM 2400/3600 LPM
i ii iii 53 54
i
811
Handling,assembling , installation,aligning and commissioning of EACH corporation supplied manually operated Myre/SR Pump No.10. Supplying and replacing the existing check valve with GM body , GM seating check valve of approved make screwed angular / horizontal type In earth pit tanks 40 mm dia 50 mm dia EACH EACH
Four Thousand Six Hundred and and three only Five Thousand Seven Hundred and Fifty only Nine Thousand Three Hundred and Thirty Five only One Thousand Eight Hundred and Fiftry Two only
2823 3877
Two Thousand Eight Hundred and Twenty Three only Three Thousand Eight Hundred and Seventy Seven only Three thousand One Hundred and Sixty Three only Three Thousand Nine Hundred and Eighty Eight only
812
ii
813
For under driveway tanks 40 mm dia 50 mm dia EACH EACH 3163 3988
814
55
i
815
Supplying and replacing the existing check valve with a CI body , GM / neoprene seating check valve of approved make screwed angular / horizontal type check valves For eath pit tanks 40 mm dia 50 mm dia EACH EACH 1738 1868
One thousand Seven Hundred and Thirty Eight only One thousand Eight Hundred and Sixty Eight only
816
ii
817 818
For under driveway tanks 40 mm dia 50 mm dia EACH EACH 2077 2207
Two Thousand and Seventy Seven only Two Thousand Two Hundred and Seven only
38
ITEM CODE
Sl. No.
DESCRIPTION
Replacing existing manhole gaskets for 15/20/50/70 KL U/G & A/G tanks including disconnecting the pipelines, removing nuts, bolts & manhole cover and supplying and fixing permanite oil gaskets, nuts & bolts and reconnecting the pipeline.
Unit
Rate (Rs.)
819
56
LS
1715
57
Construction of Pipeline trench of various sizes with brick masonry 230mm thick in CM 1:5 as per drawing No. IOC/CAPEX/113 300 x 300 300 x 450 450 x 450 Removing the trench slab and sand from existing trench back filling with excavated sand ,relaying the removed trench slab in position etc. as directed at site Supply and fixing of Manhole covers Cast Iron manhole covers 750x750mm square cover with frame 240 kg EACH EACH EACH EACH EACH 14753 12900 3328 1128 15297
Fourteen Thousand Seven Hundred and Fifty Three only Twelve Thousand and Nine Hundred only Three thousand three Hundred and Twenty Eight only One thousand One Hundred and Twenty Eight only Fifteen Thousand Twio Hundred and Ninety Seven only Eleven Thousand Three Hundred and Sevnty Six only Eleven Thousand Two Hundred and Ten only Eight thousand One Hundred and Fifty Three only Four Thousand Two Hundred and Fifty Nine only Nine Hundred and Nineteen only Seven Thousand Three Hundred and Eighty Seven only
RM RM RM
Two Thousand and Thirteen only Two Thousand Three Hundred and Fourteen only Two Thousand Six Hundred and Sixty Four only
823
58
RM
229
59 i a
824 825 826 827 828
( Heavy duty )
b c
600x600mm square cover with frame 210 kg 450x450mm square cover with frame 50 kg 13 kg
d e
600mm circular cover with square frame 250 kg ii a Ductile Iron Manhole covers - Hinged type 900x900 mm square cover with frame b c 750x750 mm square cover with frame 600x600mm square cover with frame d e f 450x450mm square cover with frame 300x300mm square cover with frame 170 kg 125 kg 90 kg 45 kg 8 kg
60
835
Painting of pipelines with two coats of zinc phosphate primer and two coats of enamel paint of approved colour as per colour code provided.
SQM
63
61
836
LUBE OIL DISPLAY RACK Supply and fixing of lube oil display racks for indoors with powder coated metallic trays as per Drg No.V2K-FC01A-1/5,FC01A2-2/5 , FC01B-3/5, FC01C-4/5,FC01D-5/5 and as per IOC specifications.
62 FRP- SERVICE BIN
SET
17437
837
Fabrications, supply and delivery of FRP service bin as per technical specification, drawings, details complete as directed (Drg. No.V2K-FCO4AEACH 1/3, 2/3 & 3/3)
9775
39
ITEM CODE
Sl. No.
DESCRIPTION
Note: The rate of Installation should be inclusive of Cable clamps, tags, Saddles, Spacer, Screws, Consumables etc. however cable trays / pipes, trenches, fabricated tray supports etc will be covered & paid in Separate Items if required
Unit
Rate (Rs.)
901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926
1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.10 1.11 1.12 1.13 1.14 1.15 1.16 1.17 1.18 1.19 1.20 1.21 1.22 1.23 1.24 1.25 1.26
2 Core x 1.5 sq. mm. (copper) 2 Core x 2.5 sq. mm. (copper) 3 Core x 1.5 sq. mm. (copper) 3 Core x 2.5 sq. mm (copper) 3 Core x 6 sq. mm (copper) 4 Core x 2.5 sq. mm (copper) 3 Core x 1.5 sq.mm Flame Retardent Low Smoke (FRLS) copper Cable 6 Core x 2.5 sqmm Flame Retardent Low Smoke (FRLS) copper cable 2 Core x 4 sq. mm (aluminium) 2 Core x 6 sq. mm (aluminium) 2 Core x 16 sq. mm (aluminium) 3 Core x 4 sq. mm (aluminium) 3 Core x 6 sq. mm (aluminium) 3 Core x 10 sq. mm (aluminium) 3core, 16 sqmm aluminium conductor AYFY 4 Core x 6 sq. mm (aluminium) 4 Core x 10 sq. mm (aluminium) 4 Core x 16 sq. mm (aluminium) 4 Core x 25 sq. mm (aluminium) 3.5 Core x 25 sq. mm (aluminium) 3.5 Core x 35 sq. mm (aluminium) 3.5 Core x 50 sq. mm (aluminium) 3.5 Core x 70 sq. mm (aluminium) 3.5 Core x 95 sq. mm (aluminium) 3.5 Core x 120 sq. mm (aluminium) 3.5 Core x 150 sq. mm (aluminium) RELAYING WORKS Re-laying corporation supplied under ground copper/ aluminium conductor cable (XLPE/PVC insulated) through existing RCC hume pipes, trenches etc complete as per specification.(Excavation of earth work/end termination shall be paid seperately) 1.5 sq.mm to 2.5 sq.mm XLPE /AYFY/WR 4 sq.mm to 10 sq.mm XLPE / AYFY/WR 16 to 35 sq.mm XLPE / AYFY/WR 50 sq.mm to70 sq.mm XLPE / AYFY/WR 120 sq.mm XLPE / AYFY/WR SUPPLY AND LAYING OF FLAT CABLES 3core, 2.5 sq.mm copper Flat Cable for submersible pump 3core, 4 sq.mm copper Flat Cable for submersible pump SUPPLY AND LAYING OF SIGNAL CABLES
RM RM RM RM RM RM RM RM RM RM RM RM RM RM RM RM RM RM RM RM RM RM RM RM RM RM
134.00 173.00 157.00 213.00 370.00 258.00 171.00 374.00 112.00 134.00 159.00 121.00 152.00 171.00 188.00 174.00 178.00 219.00 285.00 272.00 316.00 409.00 528.00 645.00 807.00 931.00
Rupees One Hundred Thirty Four Rupees One Hundred Seventy Three Rupees One Hundred Fifty Seven Rupees Two Hundred Thirteen Rupess Three Hundred Seventy Rupees Two Hundred Fifty Eight Rupees One Hundred Seventy One Rupees Three Hundred Seventy Four Rupees One Hundred Twelve Rupees One Hundred Thirty Four Rupees One Hundred Fifty Nine Rupees One Hundred Twenty One Rupees One Hundred Fifty Two Rupees One Hundred Seventy One Rupees One Hundred Eighty Eight Rupees One Hundred Seventy Four Rupees One Hundred Seventy Eight Rupees Two Hundred Nineteen Rupees Two Hundred Eighty Five Rupees Two Hundred Seventy Two Rupees Three Hundred Sixteen Rupees Four Hundred Nine Rupees Five Hundred Twenty Eight Rupees Six Hundred Forty Five Rupees Eight Hundred Seven Rupees Nine Hundred Thirty One
2 927 928 929 930 931 932 933 2.1 2.2 2.3 2.4 2.5 3 3.1 3.2
RM RM RM RM RM RM RM
Rupees Nineteen Rupees Twenty Six Rupees Thirty Five Rupees Forty Two Rupees Forty Nine Rupees One Hundred Ten Rupees One Hundred Fifty Four
40
ITEM CODE
Sl. No.
4
DESCRIPTION
Supply and Laying of signal cables of following sizes for non space pumps including termination 4 Core 4 Sqmm 2 Core 0.5 Sqmm 10 Core 0.5 Sqmm 0.6 Core 0.7 Sqmm CABLE TERMINATION TERMINATION USING NON FLAME PROOF (NON-FLP) HEAVY DUTY DOUBLE COMPRESSION TYPE GLANDS Cable Termination (NON FLP) : Providing termination of 1.1 kV grade armoured cable for the following sizes including supply of NON FLP heavy duty Double Compresson cable glands, crimping type lugs and allied jointing materials, etc. all complete as per specification & direction of Engineer Incharge. Glands and lugs shall be of approved make. Copper lugs for copper cables and aluminium lugs for aluminium cables shall be used. 2 Core x 1.5 sq. mm. 2 Core x 2.5 sq. mm. 2 Core x 4 sq. mm 2 Core x 6 sq. mm 2 Core x 16 sq. mm 3 Core x 1.5 sq. mm. 3 Core x 2.5 sq. mm 3 Core x 4 sq. mm 3 Core x 6 sq. mm 3 Core x 6 sq. mm (Copper) 3 Core x 10 sq. mm 3 Core x 16 Sqmm 4 Core x 2.5 sq. mm 4 Core x 6 sq. mm 4 Core x 10 sq. mm 4 Core x 16 sq. mm 4 Core x 25 sq. mm 3.5 Core x 25 sq. mm 3.5 Core x 35 sq. mm 3.5 Core x 50 sq. mm 3.5 Core x 70 sq. mm 3.5 Core x 95 sq. mm 3.5 Core x 120 sq. mm 3.5 Core x 150 sq. mm 6 Core x 2.5 sq.mm TERMINATION USING NON FLAME PROOF (NON-FLP) SINGLE COMPRESSION TYPE GLANDS Cable Termination (NON FLP) : Providing termination of 1.1 kV grade armoured cable for the following sizes including supply of NON FLP Single Compresson cable glands, crimping type lugs and allied jointing materials, etc. all complete as per specification & direction of Engineer In-charge. Glands and lugs shall be of approved make.
Unit
Rate (Rs.)
RM RM RM RM
Rupees Three Hundred Fifty Two Rupees Thirty Two Rupees Ninety Four Rupees Thirty Four
5.1
938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962
a b c d e f g h i j k l m n o p q r s t u v w x y
Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each
136.00 147.00 159.00 193.00 238.00 149.00 162.00 161.00 194.00 206.00 213.00 259.00 164.00 196.00 215.00 287.00 354.00 353.00 382.00 439.00 488.00 515.00 691.00 779.00 219.00
Rupees One Hundred Thirty Six Rupees One Hundred Forty Seven Rupees One Hundred Fifty Nine Rupees One Hundred Ninety Three Rupees Two Hundred Thirty Eight Rupees One Hundred Forty Nine Rupees One Hundred Sixty Two Rupees One Hundred Sixty One Rupees One Hundred Ninety Four Rupees Two Hundred Six Rupees Two Hundred Thirteen Rupees Two Hundred Fifty Nine Rupees One Hundred Sixty Four Rupees One Hundred Ninety Six Rupees Two Hundred Fifteen Rupees Two Hundred Eighty Seven Rupees Three Hundred Fifty Four Rupees Three Hundred Fifty Three Rupees Three Hundred Eighty Two Rupees Four Hundred Thirty Nine Rupees Four Hundred Eighty Eight Rupees Five Hundred Fifteen Rupees Six Hundred Ninety One Rupees Seven Hundred Seventy Nine Rupees Two Hundred Nineteen
5.2
41
ITEM CODE
Sl. No.
a b c d e f g h
DESCRIPTION
Unit
Rate (Rs.)
111.00 140.00 153.00 172.00 196.00 201.00 232.00 267.00
Upto 2.5 sqmm copper conductor cable AYFY Upto 6 sqmm Aluminium conductor cable AYFY 10 sqmm aluminium conductor cable AYFY 16 sqmm aluminium conductor cable AYFY 25 sqmm aluminium conductor cable AYFY 35 sqmm aluminium conductor cable AYFY 50 sqmm aluminium conductor cable AYFY 70 sqmm aluminium conductor cable AYFY TERMINATION USING FLAME PROOF (FLP) HEAVY DUTY DOUBLE COMPRESSION GLANDS Cable Termination (FLP) : Providing termination of 1.1 kV grade armoured cable for the following sizes including FLP heavy duty double compression cable glands (Baliga or Equivalent Make), crimping lugs and allied jointing materials, etc. all complete as per specification & direction of Engineer Incharge. Copper lugs for copper cables and aluminium lugs for aluminium cables shall be used. 2 Core x 1.5 sq. mm. 2 Core x 2.5 sq. mm. 2 Core x 4 sq. mm 2 Core x 6 sq. mm 2 Core x 16 sq. mm 3 Core x 1.5 sq. mm. 3 Core x 2.5 sq. mm 3 Core x 4 sq. mm 3 Core x 6 sq. mm 3 Core x 6 sq. mm (Copper Cable) 3 Core x 10 sq. mm 3 Core x 16 sq. mm 4 Core x 2.5 sq. mm 4 Core x 6 sq. mm 4 Core x 10 sq. mm 4 Core x 16 sq. mm 4 Core x 25 sq. mm 3.5 Core x 25 sq. mm 3.5 Core x 35 sq. mm 3.5 Core x 50 sq. mm 3.5 Core x 70 sq. mm 3.5 Core x 95 sq. mm 3.5 Core x 120 sq. mm 3.5 Core x 150 sq. mm TERMINATION USING CABLE END KITS
5.3
971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994
a b c d e f g h i j k l m n o p q r s t u v w x
Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each
339.00 370.00 369.00 370.00 571.00 341.00 372.00 371.00 371.00 383.00 547.00 1007.00 374.00 547.00 549.00 1035.00 1037.00 1037.00 1065.00 1073.00 1558.00 1584.00 2075.00 2088.00
Rupees Three Hundred Thirty Nine Rupees Three Hundred Seventy Rupees Three Hundred Sixty Nine Rupees Three Hundred Seventy Rupees Five Hundred Seventy One Rupees Three Hundred Forty One Rupees Three Hundred Seventy Two Rupees Three Hundred Seventy One Rupees Three Hundred Seventy One Rupees Three Hundred Eighty Three Rupees Five Hundred Forty Seven Rupees One Thousand Seven Rupees Three Hundred Seventy Four Rupees Five Hundred Forty Seven Rupees Five Hundred Forty Nine Rupees One Thousand Thirty Five Rupees One Thousand Thirty Seven Rupees One Thousand Thirty Seven Rupees One Thousand Sixty Five Rupees One Thousand Seventy Three Rupees One Thousand Five Hundred Fifty Eight Rupees One Thousand Five Hundred Eighty Four Rupees Two Thousand Seventy Five Rupees Two Thousand Eighty Eight
42
ITEM CODE
Sl. No.
DESCRIPTION
Outdoor Cable Termination : Providing outdoor cable termination of following 1.1 kV grade XLPE/PVC insulated armoured cable including suitable Cable end kit of approved make, ferrule, tape and other jointing material, etc. all complete including supply of all materials as per specification & direction of Engineer In-charge. 4 Core x 16 sq. mm 4 Core x 25 sq. mm 3.5 Core x 25 sq. mm 3.5 Core x 35 sq. mm 3.5 Core x 50 sq. mm 3.5 Core x 70 sq. mm 3.5 Core x 95 sq. mm 3.5 Core x 120 sq. mm 3.5 Core x 150 sq. mm CABLE JOINTING Cable Jointing : Providing straight through joint of following 1.1 kV grade XLPE insulated armoured cable including suitable jointing kit of approved make, ferrule, tape and other jointing material, etc. all complete including supply of all materials as per specification & direction of Engineer In-charge. 2 Core x 1.5 sq. mm. 2 Core x 2.5 sq. mm. 2 Core x 4 sq. mm 2 Core x 6 sq. mm 2 Core x 16 sq. mm 3 Core x 1.5 sq. mm. 3 Core x 2.5 sq. mm 3 Core x 4 sq. mm 3 Core x 6 sq. mm 3 Core x 6 sq. mm (Copper Cable) 3 Core x 10 sq. mm 3 Core x 16 sq. mm 4 Core x 2.5 sq. mm 4 Core x 6 sq. mm 4 Core x 10 sq. mm 4 Core x 16 sq. mm 4 Core x 25 sq. mm 3.5 Core x 25 sq. mm 3.5 Core x 35 sq. mm 3.5 Core x 50 sq. mm 3.5 Core x 70 sq. mm 3.5 Core x 95 sq. mm
Unit
Rate (Rs.)
Rupees Six Hundred Forteen Rupees Six Hundred Forteen Rupees Six Hundred Forteen Rupees Seven Hundred Seventy Rupees Seven Hundred Seventy Rupees Seven Hundred Seventy Rupees Seven Hundred Seventy Rupees Eight Hundred Eight Rupees Eight Hundred Ninety Three
1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025
7.1 7.2 7.3 7.4 7.5 7.6 7.7 7.8 7.9 7.10 7.11 7.12 7.13 7.14 7.15 7.16 7.17 7.18 7.19 7.20 7.21 7.22
Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each
474.00 474.00 480.00 481.00 679.00 476.00 476.00 482.00 482.00 494.00 654.00 656.00 478.00 484.00 657.00 684.00 950.00 950.00 972.00 1099.00 1210.00 1430.00
Rupees Four Hundred Seventy Four Rupees Four Hundred Seventy Four Rupees Four Hundred Eighty Rupees Four Hundred Eighty One Rupees Six Hundred Seventy Nine Rupees Four Hundred Seventy Six Rupees Four Hundred Seventy Six Rupees Four Hundred Eighty Two Rupees Four Hundred Eighty Two Rupees Four Hundred Ninety Four Rupees Six Hundred Fifty Four Rupees Six Hundred Fifty Six Rupees Four Hundred Seventy Eight Rupees Four Hundred Eighty Four Rupees Six Hundred Fifty Seven Rupees Six Hundred Eighty Four Rupees Nine Hundred Fifty Rupees Nine Hundred Fifty Rupees Nine Hundred Seventy Two Rupees One Thousand Ninety Nine Rupees One Thousand Two Hundred Ten Rupees One Thousand Four Hundred Thirty
43
ITEM CODE
Sl. No.
7.23 7.24 7.25 3.5 Core x 120 sq. mm 3.5 Core x 150 sq. mm 6 Core x 2.5 sq.mm CABLE ROUTE MARKER 8
DESCRIPTION
Unit
Rate (Rs.)
1845.00 1859.00 489.00
Supply & Installation of L.T cable route marker with inscription, bolted/welded to 35cmx35cmx6mm angle iron, 60 cm long of following sizes 150 mm dia CI marker CABLE BRICK DUCT Providing & constructing underground brick duct 750mm below GL for laying of 3 cables of max. diameter 70mm, complete with supply and laying of sand, bricks & including Excavation and backfilling in all kind of soils and as per drawing No IOC/FEATS/CAPEX/240-A 500 mm width 275 mm width Providing & constructing underground brick duct 450mm below GL for laying of cables , complete with supply and laying of sand, bricks & including Excavation and backfilling in all kind of soils and as per drawing No IOC/FEATS/CAPEX/240-A RM RM 237.00 167.00 Rupees Two Hundred Thirty Seven Rupees One Hundred Sixty Seven Each 178.00 Rupees One Hundred Seventy Eight
1029
8.1 9
1030 1031
9.1 9.2
1032
9.3 10.0
500 mm width G.I PIPE Providing and laying class-B 50mm dia GI pipe for cable routing under flooring/ EB post leading including sealing both ends with jute and Bitumin HOT DIP GALVANIZED CABLE TRAYS
RM
199.00
Rupees One Hundred Ninety Nine Rupees Three Hundred Forty Seven
1033
10.1
RM
347.00
11
Supply , assembly & Installation of Hot Dip Galvanized M.S cable trays. The standard length of tray section shall be 2.5 meters, 2mm Thickness. Cable tray shall be supported at 1000mm distance & shall be as per appd.drawings Note: The installation shall include fixing of tray on Supports, Necessary consumables shall be included In the rate. Bends shall be measured in running meter basis only.
150 x 50 mm , ladder type 300 x 50 mm , ladder type 150 x 50 mm , perforated type 300 x50 mm , perforated type FLAME PROOF /THERMO PLASTIC JUNCTION BOXES Supply & fixing of flame proof cast aluminium junction box 100 mm dia (4 way entry) for cable up to 4 Sqmm size of Baliga/Equivalent makes)including clamping arrangement, all complete as per specification and direction of Engineer In-charge. The cost should also include for providing dummy plug for unutilized entry inside the box Supply & fixing of flame proof 125 mm dia cast aluminium junction box (4 way entry) for cables beyond 4 Sqmm and up to 25 sqmm including clamping arrangement, all complete as per specification and direction of Engineer Incharge. The cost should also include for providing dummy plug for unutilized entry inside the box Supply and Fixing of Weatherproof (IP-65) Thermoplastic 2way Cable Junction Box of hensel/equivalent make with terminal block fitted inside the box suitable for following cable sizes. for 2.5 sq.mm. cable entry size with 9 terminals for 4 sq.mm. cable entry size with 9 terminals Supplying and providing 100mm square hensel/equivalent make weather proof thermo plastic junction box for emblem pole/ light pole/yard light EARTHING AS PER DRG Nos. IOC/ENGG/EAR/01, IOC/ENGG/EAR/02,IOC/ENGG/EAR/03, IOC/ENGG/EAR/04,IOC/CAPEX/224A A,IOC/CAPEX/225A,IOC/CAPEX/331,IOC/CAPEX/332
RM RM RM RM
Rupees Four Hundred Forty One Rupees Five Hundred Twenty Three Rupees Five Hundred Fifty Rupees Eight Hundred Seventy One
1038
12.1
Each
1349.00
1039
12.2
Each
1823.00
Rupees Four Hundred Sixty Nine Rupees Five Hundred Seventy One Rupees Four Thousand Five Hundred Eighty Eight
13
44
ITEM CODE
Sl. No.
DESCRIPTION
Providing earthing with 100 mm dia, 3.0M long C.I pipe as per IS:3043 (with latest ammendment) including providing suitable earth bus for interconnection, providing a mixture of salt & charcoal, making earth pit chamber with chequered plate cover as per standard Drawing all complete as per specification & direction of Engineer In-charge (Refer Drg No. IOC/ENGG/EAR/04) Providing earthing with 600x600x3.15 mm thick copper plate as per IS:3043 including supply of plate, strip, pipe, providing suitable earth bus for interconnection, providing a mixture of salt & charcoal, making earth pit chamber with chequered plate cover as per standard drwng. etc. all complete as per specification & direction of Engineer In-charge. (Refer Drg No. IOC/ENGG/EAR/224A Providing earthing with 1200x1200x6 mm thick G.I plate as per IS:3043 including supply of plate, strip, pipe, providing suitable earth bus for interconnection, providing a mixture of salt & charcoal, making earth pit chamber with chequered plate cover as per standard drwng. etc. all complete as per specification & direction of Engineer In-charge. (For Depots and Terminals) (Refer drawing IOC/KITCO/CAPEX/225A Maintenanace Free CPRI approved Earthing(for Normal Soil Condition) as per IS : 3043 with 100 mm dia, 3.0 M long C.I pipe including providing suitable earth bus for interconnection, providing earth compound, making earth pit chamber with earth plate cover etc all complete as per spec and direction from Engineer-in-Charge Testing and certification of existing earthing stations as per standards using Earth Megger and necessary accessories. EARTH STRIPS Supply & drawing/laying, jointing, connecting, testing and commissioning of copper strip/GI wire for earthing and lightning protection under or above ground complete as per specification for the following : 50 x 10mm G.I. Strip 40 x 6 mm G.I. Strip 38 x 6 mm G.I.strip 32 x 8 mm G.I.strip 32 x 6 mm G.I.strip 50 x 6 mm G.I. Strip 25 x 6 mm GI strip 25 x 3 mm GI strip 8 S.W.G. G.I. Wire (bare) 10 S.W.G. G.I. Wire (bare) 12 S.W.G. G.I. Wire (bare) 6 S.W.G. Cu. Wire 8 S.W.G. Cu. Wire 10 S.W.G. Cu. Wire
Unit
Rate (Rs.)
1043
13.1
Each
5,888.00
1044
13.2
Each
1045
13.3
Each
12,125.00
1046
13.4
Each
6,528.00
Rupees Six Thousand Five Hundred Twenty Eight Rupees Three Hundred Five
1047
13.5
Each
305.00
14
1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063
14.1 14.2 14.3 14.4 14.5 14.6 14.7 14.8 14.9 14.10 14.11 14.12 14.13 14.14
RM RM RM RM RM RM RM RM RM RM RM RM RM RM RM RM
388.00 162.00 217.00 176.00 145.00 229.00 121.00 74.00 16.00 13.00 12.00 99.00 72.00 48.00 441.00 858.00
14.15 25 x 3 mm Cu. Strip 14.16 25 x 6 mm Cu. Strip 15 FLEXIBLE CONNECTION WITH CROCODILE CLIP Providing & fixing flexible copper cable PVC insulated of 16 sq mm for connecting the earth grid/earth strip with the crocodile clip including cost of 1 no.crocodile clip , bi-metallic strip (for tanker earthing and other job). LIGHTNING PROTECTION Formation of lightning protection arrangement with supply of 1.0 Meter height spike(as per IS 2309) and erection at top most portion of structure/building and connecting the same to earthpit by 40x6mm GI Strip (excluding supply and laying of GI strip) SAFETY EQUIPMENTS Supplying & fixing of following items for electrical safety in switch rooms/DG rooms etc Rubber mat of 11 KV grade (2Mx1M size) near swichboards as per rooms/DG rooms etc as directed by Engineer In charge and as per IS - El 5216-P1-2:82 11 KV grade hand gloves, ISI mark as per IS - El 5216P1-2 :86
Rupees Three Hundred Eighty Eight Rupees One Hundred Sixty Two Rupees Two Hundred Seventeen Rupees One Hundred Seventy Six Rupees One Hundred Forty Five Rupees Two Hundred Twenty Nine Rupees One Hundred Twenty One Rupees Seventy Four Rupees Sixteen Rupees Thirteen Rupees Twelve Rupees Ninety Nine Rupees Seventy Two Rupees Forty Eight Rupees Four Hundred Forty One Rupees Eight Hundred Fifty Eight
1064
15.1 16
R.M.
172.00
1065
16.1
Each
1,532.00
Each Each
810.00 202.00
45
ITEM CODE
Sl. No.
17.3 17.4 17.5 18
DESCRIPTION
Unit
Rate (Rs.)
5,072.00 395.00 76.00
6 mm thick chequered plate on cable trench inside swtich room, DG room, Sq. M. earthing pit etc. Supply and fixing of shock treatment chart in English, Hindi & local language Each framed in glass framework Supplying and providing 8 SWG copper wire bonding for pieline flange joints. DISTRIBUTION TRANSFORMERS Supply, installation, testing and commissioning of 11kV/ 433V, 63 kVA, 3 phase, 50 Hz, double wound, outdoor type, oil immersed naturally cooled CRGO core CSP distribution transformer with Aluminium winding, top cover fixed with nut and bolt with neoprove gasket arrangement, .025mm copper diaphram pressure relief vend and LT circuit breaker with strengthened jumbers. Transformers shall be generally confirming to IS-1180 (Part 1&2) of 1979 and IS-2026/1977 (Latest version) except where specified otherwise with first filling of oil generally as per IS- 335/1983 (Latest revision) and as per specification of AP TRANS CO. Also confirming maximum no load loss and full load loss should be less than 150W and 1200W respectively. (The Civil Works for making Pedestals shall be paid separately) Supply, installation, testing and commissioning of 11kV/433V, 100 kVA, 3 phase, 50 Hz, double wound, outdoor type, oil immersed naturally cooled CRGO core CSP distribution transformer with Aluminium winding, top cover fixed with nut and bolt with neoprove gaskett arrangement, .025mm copper diaphram pressure relief vend and LT circuit breaker with strengthened jumbers. Transformers shall be generally confirming to IS-1180 (Part 1&2) of 1979 and IS-2026/1977 (Latest version) except where specified otherwise with first filling of oil generally as per IS- 335/1983 (Latest revision) and as per specification of AP TRANS CO. Also confirming maximum no load loss and full load loss should be less than 220W and 1700W respectively. (The civil works for making pedestals shall be paid separately) PANEL BOARDS Supply, installation, testing and commissioning of cubicle type power and motor control centre with six nos of LED type (RYB) indicating lamps, 3 Nos. of ammeters,1No.of voltmeter with selector switch, 3nos. of 100/5A CTs, control fuses, control wiring etc., and to be fabricated out of 16 SWG MS sheet undergone 7 tank process and painted with anticorrosive primer and two coats of grey enamel paint and having following specific components complete as per enclosed standard drawings:Type-I 125A FP SFCOS with 100A HRC fuse as incomer-1 No 125A TPN busbar chamber with Aluminium bus 63A TPN SDFU with 50A HRC fuse as outgoings - 4 Nos 63A 100mA RCBO (MCB+ELCB) - 3 Nos. 63A 300mA RCBO (MCB+ELCB) - 1 No. 6-32A SP MCB - 40 Nos. 6-32A DP MCB - 12 Nos. 6-32A TP MCB - 3 Nos. Earth Bus Dummy plates - 23 Nos. Supply, installation, testing and commissioning of cubicle type power and motor control centre with six nos of LED type (RYB) indicating lamps, 3 Nos.of ammeters,1No. of voltmeter with selector switch, 3 Nos. of 100/5A CTs, control fuses, control wiring etc. and to be fabricated out of 16 SWG MS sheet undergone 7 tank process and painted with anticorrosive primer and two coats of enamel paint & having following specific components complete as per enclosed standard drawings:Type-III 125A FP SFCOS with 100A HRC fuse as incomer-1 No 125A TPN busbar chamber with Aluminium bus. 63A TPN SDFU with 50A HRC fuse as outgoings -3 Nos 63A 100mA RCBO (MCB+ELCB) - 2 Nos. 63A 300mA RCBO (MCB+ELCB) - 1 No. 6-32A SP MCB - 24 Nos. 6-32A DP MCB - 9 Nos. 6-32A TP MCB - 3 Nos. Earth Bus Dummy plates - 3 Nos. Each
1071
18.1
Each
Rupees One Lakh Thirteen 113,498.0 Thousand Four Hundred Ninety Eight
1072
18.2
Each
140,003.0
19 19.1
1073
Set
19.2
1074
Set
70932.00
46
ITEM CODE
Sl. No.
DESCRIPTION
Supply, installation, testing and commissioning of cubicle type power and motor control centre with six nos of LED type (RYB) indicating lamps, 3 Nos.of ammeters,1No. of voltmeter with selector switch, 3 Nos. of 100/5A CTs, control fuses, control wiring etc. and to be fabricated out of 16 SWG MS sheet undergone 7 tank process and painted with anticorrosive primer and two coats of enamel paint & having following specific components complete as per enclosed standard drawings:Type-II 63A FP SFCOS with 50A HRC fuse as incomer-1 No 100A TPN busbar chamber with Aluminium bus. 32A TPN SDFU with 25A HRC fuse as outgoings -2 Nos 32A 100mA RCBO (MCB+ELCB) - 1 Nos. 32A 300mA RCBO (MCB+ELCB) - 1 No. 6-32A SP MCB - 24 Nos. 6-32A DP MCB - 9 Nos. 6-32A TP MCB - 3 Nos. Earth Bus Dummy plates - 9 Nos. PANEL BOARD ACCESSORIES Supplying and fixing of following meters and accessories in existing DB/ Panel board. 96x96mm Ammeter 96x96 mm Volt meter Ammeter selector switch Volt meter selector switch LED type Phase indicator lamp 2-16A HRC control fuse with fuse base and fuse carrier 16A neutral link Push button station with illuminated LED type start and stop buttons enclosed in weather proof enclosure with necessary MS support inter connection etc as required.. EB METERING UNITS Supply, fabrication and erection of out door duty Three Phase EB meter board with provision for energy meter (energy meter will be supplied by EB ) including 3 no.s of 100A HRC fuse unit and fuse base,neutral link,Bakelite connectors, inter connections, 125 A TPN FSU, indication lamps 3 nos.etc as required in box with hinged cover (Excluding cost of energy meter) Supply, fabrication and erection of Single Phase EB meter board with provision for energy meter (energy meter will be supplied by EB ) including 1 no.s of 63A HRC fuse unit and fuse base,neutral link,Bakelite connectors, inter connections, 63A DP MCB, indication lamp etc as required in box with hinged cover (Excluding cost of energy meter) Supply, fabrication and erection of out door duty Three Phase EB meter board with provision for energy meter (energy meter will be supplied by EB ) including 3 no.s of 100A porcelain fuse unit and fuse base,neutral link,Bakelite connectors, inter connections, 125 A TPN SFU, indication lamps 3 nos.etc as required in box with hinged cover (Excluding cost of energy meter) Supply, fabrication and erection of Single Phase EB meter board with provision for energy meter (energy meter will be supplied by EB ) including 1 no.s of 63A porcelain fuse unit and fuse base,neutral link,Bakelite connectors, inter connections, 63A DP MCB, indication lamp etc as required in box with hinged cover (Excluding cost of energy meter) CHANGE OVER SWITCHES Supply, erection, testing and commissioning of change over panel in sheet enclosure suitable for 200A COS with side handle operation including angle frame, grouting in CC complete as per standard drawing. Job includes supply & fixing of all components as per approved make, Cu. Bus, etc. (Off load Type)
Unit
Rate (Rs.)
1075
19.3
Set
20 1076 1077 1078 1079 1080 1081 1082 1083 20.1 20.2 20.3 20.4 20.5 20.6 20.7 20.8 21
Rupees Four Hundred Twenty Two Rupees Four Hundred Eighty Four Rupees Two Hundred Sixty Four Rupees Two Hundred Forty Three Rupees Two Hundred Twenty Seven Rupees One Hundred Eighty Nine Rupees Seventy Six Rupees One Thousand Six Hundred Fifty Four
1084
21.1
Set
5891.00
1085
21.2
Set
4272.00
1086
21.3
Set
5234.00
1087
21.4
Set
3993.00
22
1088
22.1
LS
13218.00
47
ITEM CODE
Sl. No.
DESCRIPTION
Supply, installation, testing and commissioning of cubicle type power control centre with six nos of LED type(RYB) indicating lamps, 3 Nos.of ammeters,1No. of voltmeter with selector switch, 3 Nos. of 250/5A CTs,control fuses, control wiring etc. and to be fabricated out of 16 SWG MS sheet undergone 7 tank process and powder coated /painted with anticorrosive primer and two coats of enamel paint and having following specific components as per enclosed drawings IOC/CAPEX/241/1 & IOC/CAPEX/241/2 250 A FPSFCOS with 250A HRC fuse as incomer- 1 No 250 A TPN busbar chamber with Aluminium bus. 125A TPN SDFU with 125A HRC fuse as outgoings - 2 Nos POINT WIRING Light/ fan/5A plug points using ordinary switch/ socket using 1.5 sq.mm flexible FRLS copper conductor wiring cables from switch box to light/fan/plug points including supply and fixing metal switch box, hylum sheet, PVC conduits and 1.5 sq mm single core PVC insulated Copper wire (green colour) as continuous earth Light/ fan/5A plug points with modular type switch /socket. Using 1.5 sq.mm flexible FRLS copper conductor wiring cable from switch box to light/fan/plug points including supply and fixing metal switch box, front plate, 15A modular type switch and socket, PVC conduits and 1.5 sq mm single core PVC insulated Copper wire (green colour) as continuous earth. 15A Power plug points with ordinary switch and socket. Using 2.5 sq.mm flexible FRLS copper conductor wiring cable from DB including supply and fixing metal switch box, hylum sheet, PVC conduits, 15A switch and socket and 1.5 sq mm single core PVC insulated Copper wire (green colour) as continuous earth 15 A power plug points with modular type switch and socket. Using 2.5 sq.mm flexible FRLS copper conductor wiring cable from DB including supply and fixing metal switch box, front plate, 15A modular type switch and socket, PVC conduits and 1.5 sq mm single core PVC insulated Copper wire (green colour) as continuous earth. POINT WIRING EXCLUDING SWITCH BOX/SWITCHES/PLUGS Point wiring for plug points with wires in 20/25mm rigid PVC conduits including 1.5 sq mm flexible FRLS Copper conductor cable (green colour) as continuous earth.( This item includes wires, conduits etc and excluding metal switch boxes and swtch/plugs) With 2 x 1.5 sq mm, FRLS,1100 V grade, for 5 Amp., plug point. With 2 x 2.5 sq mm, FRLS, 1100 V grade,for 15 Amp., plug point With 2 x 4 sq mm, FRLS, 1100 V grade for20 Amp., plug point Inside wiring in PVC conduit pipe with three run 2.5 sq.mm copper wire in surface/ recess with all accessories including conduit pipe. INTERNAL WIRING FOR YARD LIGHTS Providing internal wiring for yard light/ flood light poles from junction box to fixtures using 3 core/3 run 2.5 sq.mm flexible copper conductor cable including interconnections etc as required complete. TELEPHONE/T.V/COMPUTER POINTS Wiring with 2 pair 0.51 mm dia copper conductor telephone cable using 20 mm dia pvc conduit/casing capping. Wiring with coaxial TV cable using 20 mm dia pvc conduit/casing capping. Wiring with CAT 6 computer cable using 20 mm dia pvc conduit/casing capping. Supply and fixing telephone socket in recess including necessary GI box with front plate etc,complete. Supply and fixing TV socket in recess including necessary GI box with front plate etc,complete. Supply and fixing RJ 45 sockets for computer in recess including necessary GI box with front plate etc,complete. CIRCUIT WIRING Supplying, drawing sub-main/power wiring with PVC insulated Copper conductor wiring cables, 1100 V grade FRLS type through heavy duty rigid PVC conduit either on wall or in concealed from DB to first switch board. The job include terminations at both ends through proper jointing materials all complete for the following. Make of Insulated wires shall be as per approved make 2 x 1.5 sq mm + 1 x 1.5 sq mm earth wire
Unit
Rate (Rs.)
1089
22.2
Set
23
1090
23.1
Each
578.00
1091
23.2
Each
679.00
1092
23.3
Each
1,790.00
1093
23.4
Each
2,070.00
24
RM RM RM RM
Rupees One Hundred Seven Rupees One Hundred Twenty Nine Rupees One Hundred Sixty Rupees One Hundred Forty Rupees Eight Hundred Fifty Nine
1098
25.1 26
Each
859.00
Rupees Sixty Four Rupees Seventy Seven Rupees Eighty Five Rupees One Hundred Sixty One Rupees One Hundred Forty Eight Rupees Two Hundred Twenty One
27
1105
27.1
RM
107.00
48
ITEM CODE
Sl. No.
27.2 27.3 27.4 28 28.1 28.2 28.3 28.4 28.5 28.6 28.7 28.8 28.9
DESCRIPTION
Unit
Rate (Rs.)
140.00 194.00 276.00 33.00 158.00 138.00 117.00 155.00 168.00 237.00 158.00 551.00 122.00 382.00
1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119
2 x 2.5 sq mm + 1 x 2.5 sq mm earth wire 2 x 4 sq mm + 1 x 4 sq mm earth wire 2 x 6 sq mm + 1 x 6 sq mm earth wire SWITCHES, SOCKETS & ACCESSORIES 5Amp Piano type switch 15Amp Piano type switch and socket 5 A Socket 6A Modular Switch 15 A Modular switch 6A, 5 Pin Modular Socket 15 A 6 Pin Modular socket 2 Pin Telephone Modular Socket Electronic Fan Regulator of 5 step modular type,150W
RM RM RM Each Each Each Each Each Each Each Each Each Each Each
28.10 Modular type TV/cable sockets. 28.11 Modular type RJ 45 computer sockets. MODULAR SWITCH FRAME Supply and fixing of Modular switch frame with inner and outer face plates and accessories as per following details of approved including flush metal boxes/surface mounting boxes, plates, etc. all complete as per manufacturer's specification and direction of Engineer In-charge. 1or 2 module frame 3 module frame 4 module frame 6 module frame 8 module frame 8 module frame(horizontal) 12 module frame RESIDUAL CURRENT CIRCUIT BREAKER (RCCB) Supply & fixing of 300mA RCCB of approved Make of following ratings : 2 poles, 25A 2 poles, 40A 4 poles, 25A 4 poles, 40A 4 poles, 63A 4 Pole, 100 A SUPPLY & FIXING OF FOLLOWING RCBO's &MCBs WITH NECESSARY INTERCONNECTIONS RCBO - 40 A 2 pole 100-300mA sensitivity RCBO - 40A 4 pole 100-300mA sensitivity RCBO - 63A 4 pole 100-300mA sensitivity MCBs - Upto 32A SP
29
Rupees Two Hundred Seventeen Rupees Two Hundred Fifty Four Rupees Two Hundred Eighty One Rupees Three Hundred Seventy Six Rupees Four Hundred Fifty Three Rupees Four Hundred Sixty One Rupees Five Hundred Seventy
Rupees Two Thousand Three Hundred Ninety Nine Rupees Two Thousand Eight Hundred Sixteen Rupees Three Thousand One Hundred Thirty Three Rupees Three Thousand Two Hundred Sixteen Rupees Three Thousand Seven Hundred Twenty Two Rupees Six Thousand Two Hundred Fifty Five
Rupees Three Thousand Five Hundred Forty Five Rupees Three Thousand Nine Hundred Fifty Nine Rupees Four Thousand Five Hundred Fifty Two Rupees Two Hundred Twenty Eight
49
ITEM CODE
Sl. No.
31.5 31.6 31.7 31.8 MCBs Upto 32A DP MCBs Upto 32A TP
DESCRIPTION
Unit
Rate (Rs.)
633.00 1,008.00 1,147.00 2,180.00
63Amp 2 pole MCB on suitable plastic box on surface or recess. Supply and fixing 63Amp 4 pole MCB on suitable plastic box on surface or recess. SURGE PROTECTION DEVICES Supply and fixing of surge protection device with 40 kA, 1.4kV limited voltage capacity DIN rail mounting as per IEC 61643 Single phase, 2 Pole
32 1141 32.1
Each
6,871.00
Rupees Six Thousand Eight Hundred Seventy One Rupees Twelve Thousand Eight Hundred Ninety Eight
1142
32.2 33
Three phase, 4 Pole METAL CLAD SOCKET Supply & fixing 20A, 240V metal clad industrial type socket outlet with 2 poles and earth, metal enclosed plug top along with 20A (10kA) SPMCB (DCurve) in steel enclosure on surface/ recess with chained metalic cover for the socket and complete with interconnection testing etc as required. (For A/C) MCB DISTRIBUTION BOARDS Supply and installation of MCB distribution board having Double door without incoming isolator and MCBs 4 way SPN 8 way SPN 12 way SPN 4 way TPN 6 way TPN 8 way TPN DB INCLUSIVE OF SINGLE PHASE MCB Supply & fixing of MCB Distribution Board double door type, IP-42, inclusive of MCB, Single Phase, as per approved make of following types with all accessories such as tinned copper busbars, neutral link, earth bar, din bar, knockouts, interconnections, earth studs, etc. (MCB - 10KA Breaking Capacity) 8 way DB with 32A DP as incoming-1 No. & 6 to 16A SP as outgoing-8 Nos. 12 way DB with 32A DP as incoming-1 No. & 6 to 16A SP as outgoing- 12 Nos. DB INCLUSIVE OF 3- PHASE MCB Supply & fixing of MCB Distribution Board double door type inclusive of MCB, Three Phase, as per Approved Make of following types :(MCB - 10KA Breaking Capacity) 4 way DB with 63A FP (Residual Current Braker Overload)RCBO, 300 mA sensitivity as incoming - 1 No. & 6 to 16A SP as outgoing - 4 Nos. for each phase. 6 way DB with 63A FP RCBO, 300 mA sensitivity as incoming - 1 No. & & 6 to 16A SP as outgoing - 6 Nos. for each phase. 8 way DB with 63A FP RCBO, 300 mA sensitivity as incoming - 1 No. & 6 to 16A SP as outgoing - 8 Nos. for each phase. 12 way DB with 63A FP RCBO, 300 mA sensitivity as incoming - 1 No. & 6 to 16A SP as outgoing - 12 Nos. for each phase. MOULDED CASE CIRCUIT BREAKERS (MCCBS) Supply and fixing 3-pole MCCB(Moulded Case Circuit Breaker) of breaking capacity 25 KA in existing panel board. 32 Amp
Each
12,898.00
1143
33.1
Each
447.00
Rupees One Thousand One Hundred Six Rupees One Thousand Three Hundred Eighty Rupees One Thousand Six Hundred Sixty Five Rupees Two Thousand Seven Hundred One Rupees Three Thousand Three Hundred Forty Three Rupees Four Thousand Ten
34.2
1150 1151
a b
Each Each
3,783.00 4,910.00
Rupees Three Thousand Seven Hundred Eighty Three Rupees Four Thousand Nine Hundred Ten
34.3
1152
Each
9,957.00
Rupees Nine Thousand Nine Hundred Fifty Seven Rupees Eleven Thousand Nine Hundred Nineteen Rupees Thirteen Thousand Nine Hundred Five
1153
Each
11,919.00
1154
Each
13,905.00
1155
d 35
Each
1156
35.1
Each
5,437.00
50
ITEM CODE
Sl. No.
35.2 35.3 63 Amp 100Amp
DESCRIPTION
Unit
Rate (Rs.)
5,498.00 5,570.00
1157 1158
Each Each
Supply and fixing 3-pole MCCB of breaking capacity 25 KA in sheet steel enclosure. 1159 1160 1161 35.4 35.5 35.6 32 Amp 63 Amp 100Amp Supply and fixing 4-pole MCCB of breaking capacity 25 KA in existing panel board. 1162 1163 1164 35.7 35.8 35.9 32A 63 Amp 100Amp Supply and fixing 4-pole MCCB of breaking capacity 25 KA in sheet steel enclosure. 1165 1166 1167 35.10 32A 35.11 63 Amp 35.12 100Amp 36 SWITCH DISCONNECTOR FUSE UNITS (SDFU) Supplying and fixing of following cubical TPN switch disconnector fuse units (SDFU) with HRC fuse link (SDFU open execution) 250A TPN 125A TPN Each Each 8,507.00 5,371.00 Rupees Eight Thousand Five Hundred Seven Rupees Five Thousand Three Hundred Seventy One Rupees Two Thousand Three Hundred Twenty Five Rupees One Thousand Five Hundred Seventy Four Rupees Four Thousand Six Hundred Eighty Six Rupees Three Thousand Four Hundred Eight Rupees Three Thousand Twenty Four Rupees One Thousand One Hundred Seventy One Rupees One Thousand Four Hundred Ninety Each Each Each 7,992.00 7,992.00 8,356.00 Rupees Seven Thousand Nine Hundred Ninety Two Rupees Seven Thousand Nine Hundred Ninety Two Rupees Eight Thousand Three Hundred Fifty Six Each Each Each 6,842.00 6,842.00 7,205.00 Rupees Six Thousand Eight Hundred Forty Two Rupees Six Thousand Eight Hundred Forty Two Rupees Seven Thousand Two Hundred Five Each Each Each 6,588.00 6,648.00 6,721.00 Rupees Six Thousand Five Hundred Eighty Eight Rupees Six Thousand Six Hundred Forty Eight Rupees Six Thousand Seven Hundred Twenty One
1168 1169
36.1 36.2
1170
36.3
63A TPN
Each
2,325.00
32A TPN 63A TPN switches as per Baliga Cat.No.FSW55063 40A TPN switches as per Baliga Cat.No.FSW55040 25A TPN switches as per Baliga Cat.No.FSW55025 16A DP ordinary switches as per Baliga Cat.No.FSW53016 10A DP rotary switches as per Baliga Cat.No.FSW51010 HRC FUSE CARRIER & BASE WITH FUSES Supply and fixing of HRC fuse carrier and base with HRC fuse. 32A 63A 125A SWITCH FUSE UNIT WITHOUT FUSE Supply & fixing switches/accessories in sheet metal enclosure including providing of required connections with supply of necessary cable/conduits as required in case of existing control switch panel/switch board etc. all complete as per specification and direction of Engineer-In-Charge.( SFUs shall be of approved make and SFUs shall be without fuse) 16Amp SPN switch fuse unit
Rupees Two Hundred Seventy Eight Rupees Four Hundred Fifty Five Rupees Seven Hundred Nine
38
1180
38.1
Each
2,850.00
51
ITEM CODE
Sl. No.
38.2 38.3 32Amp SPN switch fuse unit 16Amp TPN switch fuse unit
DESCRIPTION
Unit
Rate (Rs.)
2,850.00 2,871.00
1181 1182
Each Each
32Amp TPN switch fuse unit 63Amp TPN switch fuse unit 100Amp TPN switch fuse unit 200Amp TPN switch fuse unit CHANGE OVER SWITCH Supplying & fixing of approved make 4 pole change over switch in steel sheet enclosure with side handle operation including angle iron frame, grouting in C.C. Complete as per direction of Engineer-In-Charge. 32 Amps., 4 Pole 63 Amps., 4 Pole 100 Amps., 4 Pole
Rupees Four Thousand Six Hundred Eighty Eight Rupees Four Thousand Six Hundred Eighty Eight Rupees Seven Thousand Nine Hundred Twenty Two Rupees Seven Thousand Nine Hundred Twenty Two Rupees Twelve Thousand Sixty Nine
1190 1191
39.4 39.5
125 Amps., 4 Pole 200 Amps., 4 Pole MINIATURE CIRCUIT BREAKERS (MCB) Supplying & fixing of Four Pole Miniature Circuit Breakers as per approved make of 10KA Breaking cpacity of following ratings with necessery inter connections 6A to 32A FP MCB 40A FP MCB 63A FP MCB HIGH REPTURING CAPACITY (HRC) FUSE LINK Supply & fixing of following HRC fuse link as per approved make 16 Amp. 20 Amp. 25 Amp. 32 Amp. 40 Amp. 50 Amp. 63 Amp. 100 Amp. HRC FUSE BASE Supply & fixing of following HRC Fuse Base including necessary connection of approved make Up to 63A 100 Amp. DIRECT ONLINE STARTER (DOL) Supply & Fixing of 3 phase, 415V, 50HZ DOL starter, type MK1, of single appd. make of following capacities with illuminated ON-OFF push buttons (LED type) having suitably rated thermal over load relay & phasing preventer and auxillary contactors. 1 HP 2 HP 3 HP
Each Each
7,922.00 12,069.00
40
40.1 40.2 40.3 41 41.1 41.2 41.3 41.4 41.5 41.6 41.7 41.8
Rupees One Thousand Three Hundred Thirty Nine Rupees One Thousand Nine Hundred Ninety Nine Rupees One Thousand Nine Hundred Ninety Nine
Rupees Eighty One Rupees Eighty One Rupees Eighty One Rupees Eighty Three Rupees Eighty Three Rupees One Hundred Fifty Five Rupees Two Hundred Eleven Rupees Three Hundred Forty One
Each Each
167.00 272.00
Rupees One Hundred Sixty Seven Rupees Two Hundred Seventy Two
43
Rupees One Thousand Seven Hundred Forty Six Rupees One Thousand Seven Hundred Forty Six Rupees One Thousand Seven Hundred Forty Six
52
ITEM CODE
Sl. No.
43.4 5 HP
DESCRIPTION
Unit
Rate (Rs.)
1,746.00
1208
Each
44
FULLY AUTOMATIC STAR DELTA STARTER (FASD) Supply & Fixing of 3 phase, 415V, 50HZ FASD (fully automatic star delta) starter with illuminated ON-OFF push buttons (LED type) having suitably rated thermal over load relay and single phasing preventor with auxillary contactors of approved make of following capacities. 10 HP 20 HP Each Each 6,196.00 7,994.00 Rupees Six Thousand One Hundred Ninety Six Rupees Seven Thousand Nine Hundred Ninety Four Rupees Nine Thousand Four Hundred Seventy Two
1209 1210
44.1 44.2
1211
44.3 45
30 HP AREA LIGHT POLES Supply, erection and painting of area light poles of following types including 50mm dia tubular arm, MS base plate, earth boss, including concrete foundation (M 15) of approx. size 0.5M x 0.5M and depth varying from 1.25M to 1.5M as per IS:2713 (Part II),as per Drawing and as per site condition, all complete as per site direction. Pole painting to be done with two coats red oxide primer and two coats of alluminium paint. 7M long 'L' Pole 7M long 'Y' Pole
Each
9,472.00
45.1
1212 1213
a b
Each Each
9,079.00 9,293.00
Rupees Nine Thousand Seventy Nine Rupees Nine Thousand Two Hundred Ninety Three Rupees Nine Thousand Eight Hundred Twenty Five Rupees Ten Thousand Thirty Nine Rupees Twelve Thousand Three Hundred Forty Eight Rupees Twelve Thousand Five Hundred Sixty Three
c d e
1217
9M long 'Y' Pole POLE BRACKETS Supply, fitting, fixing of arm bracket, tubular type, 50mm dia on pole including painting, all complete. " L " bracket " Y " bracket CABLING INSIDE POLES Supplying & drawing inside the poles 3 core 2.5 sq.mm PVC insulated flexible copper conductor, fixing of junction box at the pole base (excluding supply of JB), making all connections on both ends, all complete as per specification and direction of Engineer In-charge. "Y" Pole "L" Pole HOLLOW SECTION AREA POLE Supply, erection and painting of area light poles of 100 x 100 x 5 square hollow section of 5.0m height including MS base plate, junction box, 50 dia GI pipe for mounting light fixture etc. complete as per Drg. Nos. IOCL/SKCD/POLE/E-01, E-02 & E-03. Civil works for foundation will be measured separately. OCTAGONAL POLES Supply & Fixing of Octagonal Poles of following type as per Drawing Nos IOC/CAPEX/124-1/3 ,IOC/CAPEX/124-2/3, IOC/CAPEX/124-3/3 & IOC/CA/CAPEX/121-1/2 (Civil job shall be paid separately) : 5 Meter high galvanised Octagonal pole with top 70mm (Across/Face), bottom 130mm (Across/ Face) made up of 3 mm thick HT plate having a base plate of size 220 x 220 x 12 mm with single arm 1500mm long bracket arm made up of 48 O.D. pipe with EN 8 grade M16x600 mm J type galvanised foundation bolts and anchor plate on suitable concrete foundation as per standard drawings enclosed herein(Civil & Electrical works shall be paid separately) having fixing arrangement for mounting 2 Nos. of Metal halide luminaries (on opposite sides)
Each
12,563.00
Each Each
808.00 1,022.00
45.3
1220 1221
a b 46
Each Each
1,042.00 1,144.00
Rupees One Thousand Forty Two Rupees One Thousand One Hundred Forty Four
1222
46.1
Each
11,079.00
47
1223
47.1
Each
11,599.00
53
ITEM CODE
Sl. No.
DESCRIPTION
7 Meter high galvanised Octagonal pole with top 70mm (Across/Face), bottom 130mm (Across Face), made up of 3mm thick HT plate having a base plate of size 220 x 220 x 12 mm with single arm 1500mm long bracket arm made up of 48 O.D. pipe with EN 8 grade M20x700 mm J type galvanised foundation bolts and anchor plate on suitable concrete foundation as per standard drawings enclosed herein (Civil & Electrical works shall be paid separately) having fixing arrangement for mounting 2 Nos. of Metal halide luminaries (on opposite sides) 9 Meter high galvanised Octagonal pole with top 90mm (Across Face), bottom 155mm (Across/Face), made up of 3mm thick HT plate having a base plate of size 260 x 260 x 16 mm with single arm 1500mm long bracket arm made up of 48 O.D. pipe with EN 8 grade M24x750 mm J type galvanised foundation bolts and anchor plate on suitable concrete foundation as per standard drawings enclosed herein (Civil & Electrical works shall be paid separately) having fixing arrangement for mounting 2 Nos. of Metal halide luminaries (on opposite sides) ERECTION ONLY OF POLES Erection, Installation and commissioning of company supplied yard light poles on existing foundations, painting, internal wiring, etc. complete as per direction of Engineer In-charge (Civil job shall be paid separately). FLUORESCENT LIGHT FITTINGS Supply & fixing of 2 X TL 36W outdoor fluorescent lamp fitting (Eqiv to PHILIPS Cat No. : HGS120/136 HPF) including lamps, starter, choke & other accessories all complete (Hanging Type/ Wall Mounted Type). Providing fluorescent tubelight fitting, with 2x36 watt lamps, starter, choke, rotary holder, down rods (if required), etc. all complete as per specification and direction of Engineer-In-Charge. (For inside Building) (As per Philips Cat No. TMC 55/236 HPF/ Wipro Cat No. WIF 14240/ Crompton Cat No. IGP 1424HSB/ Najaj Cat No. BJP 236/240) Providing indoor decorative type fluorescent tubelight fitting with 2x36 watt lamps, starter, choke, rotary holder, down rods, etc. all complete as per specification and direction of Engineer-In-Charge (for inside the Sales building).(As per Philips Cat No. TCS 605/236 HPF/Wipro Cat No. WCF 92240/Crompton Cat NO. CRFC 24HSB/Bajaj Cat No. BJCM 236/240 WEB2) Providing fluorescent tube light fitting with 1x36 watt lamps, starter, choke, rotary holder, down rods(if required), etc. all complete as per specification and direction of Engineer-In-Charge. (For inside Building) (As per Philips Cat No. TMC 55/136 HPF/ Wipro Cay No. WIF 14140/ Crompton Cat No. IGP 1414HSB/Bajaj Cat No. BJSRP 136/140) COMPACT FLUORESCENT & T5 LIGHT FITTINGS Supply & Fixing of Light Fittings of following types 2X11 W CFL energy saver fitting with lamp of approved make equivalent to Philips Cat. No. FCS518/211 / WIPRO cat no: WVP 50211. 1x28 W T5 tube light fitting of approved make equivalent to Philips Cat No.TMS 122/128 / WIPRO cat no: WIF 20128 EBQ/ Crompton cat No T 5 RSF 28 EB with lamp 2x28 W T5 tube light fitting of approved make equivalent to Philips Cat No. TMS 122/228 / WIPRO cat no: WIF 20228 EBQ /Crompton T5RSF228 EB with lamp 2x28 W Mirror Optical Fitting of approved make, equivalent to Philips Cat No. TCS 398/228 D6 HF/ Crompton T5Cx11228 EB with 28 W T5 lamp 2x11W CFL energy saver fitting with choke, starter and all other accessories including lamp Make PHILIPS FCS 31/211, Bajaj BJSM211, WIPRO WVP50211, CG TLLD211) 1x 8 / 11/ 14W Wall Light fitting with all other accessories including lamp (catalogue No FL 800/320 of philips make) SODIUM VAPOUR /MERCURY VAPOUR YARD LIGHT FITTINGS Supply & fixing of street lighting luminaries including supply & fixing of 150W HPSV lamp(SON-T), control gears and other accessories all complete as per specification and direction of Engineer In-charge. (As per Philips Cat No. SGP 325/SON - T-150 GLA/Wipro Cat No. WST 25150/Crompton Cat No. SSC 1115IH/ Bajaj Cat No. BGEST 150SV IP 66 FFG) Supply & fixing of street lighting luminaries including supply & fixing of 250W HPSV lamp(SON), control gears and other accessories all complete as per specification and direction of Engineer In-charge. (As per Philips Cat No SGP 325/SON-T-250 GLA or SGP 401/SON-T-250/Wipro Cat No. WST 25250/Crompton Cat No SSC 1125IH/Bajaj Cat No BGEST 250 SV IP 66 FFG)
Unit
Rate (Rs.)
1224
47.2
Each
1225
47.3
Each
Each
1,064.00
Each
1,735.00
1228
49.2
Each
1,299.00
1229
49.3
Each
2,873.00
1230
49.4
Each
948.00
50
1231
50.1
Each
1,524.00
Rupees One Thousand Five Hundred Twenty Four Rupees One Thousand Six Hundred Ninety Four Rupees Two Thousand Three Hundred Seventy Two Rupees Five Thousand One Hundred Forty Five Rupees One Thousand Seven Hundred Ninety Seven Rupees Four Hundred Twenty Eight
1232
50.2
Each
1,694.00
1233
50.3
Each
2,372.00
1234
50.4
Each
5,145.00
1235 1236
50.5 50.6 51
Each Each
1,797.00 428.00
1237
51.1
Each
8,896.00
1238
51.2
Each
9,368.00
54
ITEM CODE
Sl. No.
51.3
DESCRIPTION
Supply and fixing Mercury vapour street light fitting suitable for 250W HPMV lamp including all accessories like chokes, gear box, etc including 250W HPMV lamp. Make Philips HRP 202/250, Wipro WSM 21250, BAJAJ BJMSC 250MV, CG MSP1225IH. Low bay integral, industrial fixture with 125 W HPMV lamp - (BJLBI 125 MV / EQUIV). CERAMIC DISCHARGE METAL HALIDE (CDMT) YARD LIGHT FITTINGS Providing and fixing yard light luminaire with 70W / 150W /250W CDMT lamp including all required accessories such as, control gear, fixtures, etc. on light poles, all complete as per specification and direction of Engineer Incharge.
Unit
Rate (Rs.)
6,553.00
1239
Each
1240
51.4 52
Nos
5,123.00
Philips Cat. No. SGP-301 - GLA 70 W CDMT Philips Cat. No. SGP-401/ CDM-TT 150W Lamp Philips Cat. No. SGP-401/ CDM-TT 250W Lamp METAL HALIDE YARD LIGHT FITTINGS Providing and fixing yard light luminaire with 250W MHL lamp including all required accessories such as, control gear, fixtures, etc. on light poles, all complete as per specification and direction of Engineer In-charge. (As per Philips Cat No. MRX 521/250 HPI-T/Wipro Cat No. WSH 25250/ Crompton Cat No MHSG 1525 IH/G/Bajaj Cat No. BGEST 250 MH IP 66 FFG) FALSE CEILING RECESSED MOUNTED FITTINGS (INSIDE BUILDING) Supply and fixing of following recessed mounting luminaires of Philips/Crompton/ WIPRO make for false ceiling including provision of suitable ply board over false ceiling for mounting of fittings, etc. all complete as per specifications and equivalent to Philips cat no. as per details given and direction of Engineer In-charge. Philips Cat. No.:FBS 185/109 / Crompton Cat. No.: TLR 9 / WIPRO Cat No. WVP 50109 with 1 x PL-S 9W Philips Cat. No.:FBS 285/209 / WIPRO cat no. WVP 50209 / Crompton Cat.No.: TLLD 29 with 2 x PL-S 9W lamp. HOARDING LIGHT FITTINGS Supply and fixing of following flood light luminaires of approved make with all accessoriesfor Hoarding lighting, etc. all complete as per specifications and direction of Engineer In-charge. Philips Cat. No. QVF 135/70W / WIPRO cat no: WFH 11070/ Crompton Cat No. FDAE7IH fitting of approved make with separate control gear and 70 W metal halide lamp. Philips Cat. No. MWF 230-SK/150 / WIPRO cat no. WFH 11150 fitting with control gear box, 1No. 150W Metal Halide lamp with mounting accessories As per Philips Cat. No. MWF 330/250 of approved make including control gear box, 250W Metal Halide lamp with mounting accessories. As per Philips Cat. No. QVF 135/500 / WIPRO cat no.WFQ 16500 including 1No 500W Halogen lamp Supply installation testing & commissioning of Double ended Metal Halide fitting with 20mm dia M.S. Square Pipe supports for providing illumination on hoarding for following wattages 1X 150 Watts (Philips Cat Ref.MVC/502/ or equivalent) 1X 70 Watts (Philips Cat Ref.RVP 339/1x70 R or equivalent) CANOPY LIGHT FITTINGS Supply & fixing of Metal Halide Luminaries for under Canopy lighting as per manufacturer's recommendation including supply & fixing of 150 W High Pressure Metal Halide lamp(HPI-T) or CDM-TTlamp, control gears and other accessories complete as per specification and direction of Engineer Incharge. (As per Philips Cat No. MPF 922/150 CST or 921/150 CST/ Wipro Cat No WHH 96150/Crompton Cat No FADR 1215IH (CA)/ Bajaj Cat No.BJPP 150W MH DECA )
Rupees Five Thousand Six Hundred Fifty Seven Rupees Seven Thousand Eight Hundred Six Rupees Eight Thousand Two Hundred Eighteen
1244
53.1
Each
7,467.00
54
1245 1246
54.1 54.2 55
Each Each
1,094.00 1,391.00
Rupees One Thousand Ninety Four Rupees One Thousand Three Hundred Ninety One
1247
55.1
Each
4,355.00
Rupees Four Thousand Three Hundred Fifty Five Rupees Six Thousand Three Hundred Fifty Three Rupees Nine Thousand One Hundred Twenty Six Rupees One Thousand Two Hundred Five
1251 1252
55.5 55.6 56
Each Each
6,535.00 4,488.00
Rupees Six Thousand Five Hundred Thirty Five Rupees Four Thousand Four Hundred Eighty Eight
1253
56.1
Each
6,281.00
55
ITEM CODE
Sl. No.
DESCRIPTION
Supply & fixing of Metal Halide Luminaries for under Canopy lighting as per manufacturer's recommendation including supply & fixing of 250 W High Pressure Metal Halide lamp(HPI-T) or CDM-TTlamp, control gears and other accessories complete as per specification and direction of Engineer Incharge. (As per Philips Cat No. MPF 923/250 CST / Wipro Cat No WHH 98250/Crompton Cat No FADR 1225IH (CA)/ Bajaj Cat No.BJPP 250W MHT CA ) Supply & fixing of CFL Luminaries for under Canopy lighting as per manufacturer's recommendation including supply & fixing of 3 X 36 W CFL lamp, control gears and other accessories all complete as per specification and direction of Engineer In-charge.(As per Philps Cat No. FBS 650 /Wipro Cat No. WVP 24 336 SGW/ Crompton Cat No. CRFW 12336/ Bajaj Cat No. BPRF 336 C LHD) BULKHEAD/WEATHER PROOF LUMINAIRES Supply & fixing of bulkhead type Luminaries PHILIPS Cat. No. : FXC 101 / WIPRO cat no. WKP 14109 including supply & fixing of 1x9W PLS lamp, etc. all complete as per specification and direction of Engineer In-charge. Weather proof light fitting suitable for 100W with lamp (Philips make vide Cat No.NXC 101 with lamp/ Crompton IBH 1110 ES/ Wipro WKG 13/ Bajaj BJDB 100 ) Supply and fixing of 2x40W street light fitting with low loss copper ballast, starter,and all other accessories including lamps. Make- Philips TRC 33/236 HPF/WIPRO WSF 15240/Crompton CG SFE24H/TW/Bajaj BJSLA 235/240 FLAME PROOF LUMINAIRES Supply and erection of following flame proof/flood light fittings with toughened glass and mesh suitable for HPMV lamp with separate control gear box of Baliga or Equivalent makes.The job includes the cost of fitting and erection,lamp, erection of control gear on suitable MS brackets etc. 125 W HPMV well glass fitting with lamp
Unit
Rate (Rs.)
1254
56.2
Each
8,401.00
1255
56.3
Each
9,466.00
57 1256 57.1
Each
1,058.00
1257
57.2
Each
770.00
1258
57.3
Each
2,486.00
58
1259
58.1
Each
12,108.00
1260
58.2
250 W HPMV flood light fixture with lamp Supply & fixing of wellglass type flame proof Luminaries including supply & fixing of 1x160W MLL lamp of Baliga or Equivalent Makes, hanging arrangement by suitable MS frame,etc. all complete as per specification and direction of Engineer In-charge. HIGH MAST LIGHT FITTINGS Designing,Supply & Installation of High Mast mounting Non Integral Type Signage/Yard Light Luminaire suitable for 250/ 400 W Metal Halide Lamps with suitable control gear box and all other accessories and the fitting shall be similar to Philips MWF 14/250 or SNF 14/400/ Bajaj BGENF - 14 /Crompton FAD 1314 CEILING FANS Supply & fixing of ceiling fan for inside of the sales building of following type: 1200 mm sweep 1400 mm sweep EXHAUST FANS Supply and fixing of exhaust fan including electrical wiring all complete as per specification and direction of site In charge. 12" light duty,1400 RPM, make GEC or equivalent 12" light duty,900 RPM, make GEC or equivalent
Each
Rupees Twelve Thousand 12,399.00 Three Hundred Ninety Nine 5,739.00 Rupees Five Thousand Seven Hundred Thirty Nine
58.3 59
Each
1261
59.1
Each
5,315.00
Each Each
1,553.00 1,661.00
Rupees One Thousand Five Hundred Fifty Three Rupees One Thousand Six Hundred Sixty One
Each Each
2,340.00 2,243.00
Rupees Two Thousand Three Hundred Forty Rupees Two Thousand Two Hundred Forty Three Rupees Three Thousand One Hundred Eighty Seven Rupees Three Thousand Ninety One
1266 1267
61.3 61.4 62
14 " heavy duty, 1400 RPM, make GEC or equivalent 14 " heavy duty, 900 RPM, make GEC or equivalent LAMPS/FIXTURES Supplying & fixing following Lamp/Fixtures 600 mm longX 18W/20W Fluorescent Tube 1200 mm long X 36W/40W fluorescent tube 120mm Long 28 W (T-5) Fluresocent Tube
Each Each
3,187.00 3,091.00
Rupees Sixty Two Rupees Sixty Three Rupees Two Hundred Fifty Five
56
ITEM CODE
Sl. No.
62.4 62.5 62.6 62.7 62.8 62.9 9 W CFL lamp 11 W CFL Lamp 18 W CFL lamp 24/26 watts CFL Lamp 36 W CFL Lamp 55 W CFL Lamp
DESCRIPTION
Unit
Rate (Rs.)
103.00 176.00 218.00 436.00 231.00 346.00 406.00 30.00 34.00 132.00 868.00 523.00 1,231.00 1,715.00 1,715.00 287.00 759.00 146.00 203.00 614.00 746.00 1,089.00 1,272.00 1,592.00 1,819.00 264.00
1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296
Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each
62.10 80 W CFL Lamp 62.11 100 watts pin type GLS lamp 62.12 25 watts Incandescent bulb 62.13 500 watts Halogen Bulb 62.14 150/250 watts sodium vapour lamp 62.15 250 W HPMV lamp 62.16 250 watts metal Helide lamp Philips make HPI-T- 250 or equivalent 62.17 150 watts CDMTT metal Helide lamp 62.18 250 watts CDMTT metal Helide lamp 62.19 160W MLL lamp with approved make 62.20 150W MH - DE lamp with approved make 62.21 Ding dong bell of Anchor make 62.22 20/40 W choke, low loss (with copper coil - 6 w loss) 62.23 40W heavy duty industrial type electronic choke(Metalic body) 62.24 125 Watts choke for mercury vapour fittings 62.25 250 Watts choke for mercury vapour fittings 62.26 125 Watts choke for high pressure sodium vapour/metal halide fittings 62.27 250 Watts choke for high pressure sodium vapour/metal halide fittings Supplying and fixing of electronic ignitor for sodium vapour & metal halide fittings of ratings 70/150/250 watts. Supplying and Fixing of Porcelain holders for sodium vapour/mercury 62.29 vapour/metal halide yard light fittings as per direction from site in charge GENERATORS Supply and installation, testing and commissioning of air cooled Diesel Generator in Acoustic Enclosure with all necessary accessories including Control panel, residential silencer, exhaust line, fuel line, anti vibration 63 mounting pads,diesel tank, electric starter with battery and seperate battery charger etc in an accuostic enclosure (70 db +/ -5 from 3 m distance. ) as required complete. 62.28 63.1 7.5KVA
1297
Each
1298
63.2
10KVA
Each
1299
63.3
15KVA
Each
1300
63.4
20KVA
Each
1301
63.5
25KVA
Each
Rupees Two Lac Fifty One 251,833.0 Thousand Eight Hundred Thirty Three Rupees Two Lac Ninety 293,932.0 Three Thousand Nine Hundred Thirty Two Rupees Three Lac Sixteen 316,671.0 Thousand Six Hundred Seventy One Rupees Three Lac Fifty 350,877.0 Thousand Eight Hundred Seventy Seven Rupees Three Lac Ninety 396,923.0 Six Thousand Nine Hundred Twenty Three
57
ITEM CODE
Sl. No.
63.6 35KVA
DESCRIPTION
Unit
Rate (Rs.)
1302
Each
1303
63.7
50KVA ERECTION ONLY OF GENERATORS Erection, testing and commissioning of IOC supplied following 3-phase Air cooled Generator including handling charges,fuel line from fuel tank to DG and Installation of Accoustic enclosure with silencer etc and excluding anti vibration mountings, cable, glands and earthing etc 7.5KVA 10KVA 15KVA 20KVA
Each
Rupees Four Lac Eighty 482,983.0 Two Thousand Nine Hundred Eighty Three Rupees Five Lac Forty 549,338.0 Nine Thousand Three Hundred Thirty Eight
64
Rupees Five Thousand Forty Nine Rupees Six Thousand Twenty Eight Rupees Six Thousand Five Hundred Thirty One Rupees Seven Thousand One Hundred Forty Seven Rupees Seven Thousand Eight Hundred Seventy Eight Rupees Nine Thousand Two Hundred Seventy Five Rupees Ten Thousand Seven Hundred Seventy
1308
64.5
25KVA
Each
7,878.00
1309 1310
64.6 64.7
35KVA 50KVA ACCOUSTIC ENCLOSURE Supplying & Installation of acoustic enclosure made with GI Corrugated Sheet of 21 guage for enclosure and 18 guage sheet for door having insulation inside with 100 mm thick wool insulation and inner surface with 1 mm thick aluminium perforated sheet and having rating of 70 db +/- 5 from 3 meter distance for existing Air cooled Generators including residential type silencers as per specification 7.5 / 10 KVA
Each Each
9,275.00 10,770.00
65
1311
65.1
Each
1312
65.2
15/20 KVA
Each
1313
65.3
25 / 35 KVA
Each
1314
65.4 66
50 KVA AMF PANELS Design, supply, installation, testing and commissioning of AMF panel suitable for following rating DG set (Silent type) For Generators up to 25 KVA For Generators up to 50 KVA CAPACITORS Supplying and installation of following rating of capacitor on suitable angle iron frame. 1 KVAR (MPP HD capacitor, 415 V) 2 KVAR (MPP HD capacitor, 415 V) 5 KVAR (MPP HD capacitor, 415 V) LEAD ACID BATTERY Supplying and fixing 12 volt Charged Lead Acid battery of approved make for Electronic dispensing pumps including giving necessery electrical connection for the following AH ratings. 7 AH 12 AH
Each
Rupees Ninety Four 94,336.00 Thousand Three Hundred Thirty Six Rupees One Lac Nine 109,876.0 Thousand Eight Hundred Seventy Six Rupees One Lac Twenty 125,417.0 Five Thousand Four Hundred Seventeen Rupees One Lac Twenty 126,157.0 Six Thousand One Hundred Fifty Seven
1315 1316
66.1 66.2 67
Each Each
Rupees Forty Five 45,828.00 Thousand Eight Hundred Twenty Eight Rupees Fifty Five 55,084.00 Thousand Eighty Four
Rupees Six Hundred Sixty Nine Rupees One Thousand Two Hundred Ninety One Rupees Two Thousand Nine Hundred Eight
1320 1321
68.1 68.2
Each Each
832.00 2,447.00
Rupees Eight Hundred Thirty Two Rupees Two Thousand Four Hundred Forty Seven
58
ITEM CODE
Sl. No.
69
DESCRIPTION
CONSTANT VOLTAGE TRANSFORMER Supplying, installation, testing and commissioning of single phase, air cooled constant voltage transformer of approved make having input voltage range of 180-260V and output voltage of 220/230V with sine wave output wave form and having automatic current limiting and short circuit protection including all accessories complete (for displays) for the following VA ratings.
Unit
Rate (Rs.)
150VA CVT 250VA CVT 500VA CVT 1000 VA CVT SINGLE PHASE SERVO VOLTAGE STABILISER Supply and fixing of 230V, Single phase, AC Servo voltage stabilizer of approved makes,(Range - 170- 270 minimum) shall be provided for Individual dispensing pump as per IE Regulation and as per specification
Rupees Five Thousand Two Hundred Thirty Rupees Six Thousand Five Hundred Twenty Seven Rupees Eight Thousand One Hundred Twelve Rupees Eleven Thousand Seven Hundred Forteen
1326 1327
70.1 70.2
Each Each
10,656.00 12,237.00
Rupees Ten Thousand Six Hundred Fifty Six Rupees Twelve Thousand Two Hundred Thirty Seven
1328
70.3
3 KVA stabilizer
Each
Rupees Forteen Thousand 14,474.00 Four Hundred Seventy Four 20,413.00 27,200.00 Rupees Twenty Thousand Four Hundred Thirteen
5 KVA stabilizer 7.5 KVA stabilizer 10 KVA stabilizer THREE PHASE SERVO STABILIZER Supplying and fixing of 3 phase air cooled servo stabilizer for balanced and unbalanced load of approved makes shall be with independent correction of each phase (Range 300 - 460 V minimum) and as per specification
Rupees Twenty Seven Thousand Two Hundred Rupees Fifty One 51,006.00 Thousand Six
1332 1333
71.1 71.2 72
10 KVA stabilizer 12 KVA stabilizer ENERGY METER - 3 PHASE/1 PHASE Supply and fixing of 3-phase,4 Wire energy meter (KWH) - ordinary type
Each Each
Rupees Fifty One Thousand Six Rupees Fifty Nine 59,491.00 Thousand Four Hundred Ninety One 51,006.00
1334 1335
72.1 72.2
Direct on line type CT operated Supply and fixing of 3-phase,4 Wire energy meter (KWH) - electronic type
Each Each
3,010.00 3,952.00
Rupees Three Thousand Ten Rupees Three Thousand Nine Hundred Fifty Two
1336 1337
72.3 72.4
Direct on line type CT operated Supply and fixing of 1-phase energy meter (KWH) - ordinary type
Each Each
5,432.00 4,894.00
Rupees Five Thousand Four Hundred Thirty Two Rupees Four Thousand Eight Hundred Ninety Four Rupees Eight Hundred Fifty Eight Rupees One Thousand Seven Hundred Ninety Nine
1338
72.5
Direct on line type Supply and fixing of 1-phase energy meter (KWH) - electronic type
Each
858.00
1339
72.6 73
Direct on line type JET WATER PUMPS Supplying and installation of Water pump of approved make with cover with locking arrangement. The pump has to be installed as per manufacturer's specification.
Each
1,799.00
59
ITEM CODE
Sl. No.
73.1 73.2 73.3 74 1HP Jet 2HP Jet 3HP Jet
DESCRIPTION
Unit
Rate (Rs.)
7,355.00 11,541.00 18,044.00
MONO BLOCK WATER PUMPS Supplying and Installation of 0.5 to 5 HP Single phase Mono block Water pump (Bronze impeller). 0.5 HP 1 HP 1.5 HP 2 HP Each Each Each Each 3,578.00 5,970.00 7,405.00 11,840.00 Rupees Three Thousand Five Hundred Seventy Eight Rupees Five Thousand Nine Hundred Seventy Rupees Seven Thousand Four Hundred Five Rupees Eleven Thousand Eight Hundred Forty Rupees Sixteen Thousand Three Hundred Sixty Six
1347
74.5 75
5 HP DISMANTLING/RE-INSTALLATION Dismantling of following electrical fittings / fixtures with all leads and lifts.
Each
16,366.00
Dismantling of the existing panel board by disconnecting all the electrical connections and reinstalling the same panel board with necessary foundation by connecting all electrical cables / earthing etc. Electrical cables of all sizes from under / above ground position DPS board all types with/ without stand 5 to 15A switches/MCBs/plugs 32/63/100A DP/TPN switches/ MCCBs /MCBs Flourescent tube light fittings of all sizes Starters (all types ) of power pumps Power pump up to 5 HP Power pump above 5 HP up to25 HP
Rupees Four Thousand Two Hundred Sixty Two Rupees Ten Rupees Twenty Rupees Six Rupees Sixteen Rupees Eight Rupees One Hundred Fifty Rupees Three Hundred Rupees Four Hundred Fifty
a) 1401 1402 1403 1404 1405 1406 1407 1408 1409 1410 1411 1412 1413 1414 1415
One Thousand Four Hundred and Forty Five only Thirty Five only One Thousand and Twenty only Three Hundred and Forty only One Hundred and Twenty Eight only Sixty Four only One Hundred and Two only Nine only Ten only Sixty Four only Forty Three only One Hundred and Seventy only One Hundred and Twenty Eight only Thirty Four only Seventeen only
60
ITEM CODE
Sl. No.
2
DESCRIPTION
Mobilisation of ladder, scaffolding, etc. for carrying out routine maintenance at locations as advised by IOC officer in charge. (This item will be operated on one time basis for items covered in Sl. No. 3 below, where ladder or scaffolding is required for carrying out the non-scheduled replacement / maintenance job. Many items of works in Sl. no. 3 may be clubbed together and executed as far as possible, in order to reduce operation of mobilisation item.) Supplying and fixing of the following items as per technical specifications, drawings and approved makes given. The items includes all the materials, labour and equipments required for dismantling and replacing the damaged/defective items or provision of new items at outlet stations. Any panel, sheet or fixtures etc. dismantled by the contractor for carrying out the above job has to be re-fixed after completion of job without causing any damage to other items.These items will be operated only for maintenance / replacement and not for first time installation.
Unit
Rate (Rs.)
1416
LS
1,615
A 1417 i
ii iii iv
Main Signage, Scaled down signage, Facility signage and Directional signage. Translucent cast vinyl stickers of LG 4000 Series or equivalent for INDIANOIL monogram on main signage as per approved colour scheme including art EACH work & cutting charge and scaffolding for pasting Translucent cast vinyl stickers of LG 4000 Series or equivalent as per IOC SQM colour scheme. Top panel 3.0mm thick polycarbonate sheet including vinyl sticker containing EACH emblem and Indian Oil lettering. 1410mmx315mm high, 3mm thick polycarbonate sheet for display panel EACH 1450x1850mm high 2.5mm thick FRP bottom panel moulded to shape 1450x3300mm high 2.5mm thick FRP bottom panel moulded to shape. 3450x710mm wide 2.5mm thick FRP side panel moulded to shape. 1500x246mm wide 2.0mm thick Aluminium bottom sheet Replacement of Z beeding ( of lion India Thane) around IOC logo this rate will be operated if only beeding is replaced without replacing the plycarbonate sheet Replacement of logo wiring with 7/20 wire as per circuit 1 of drawing no. V2k/SCO IP - 17/33. Replacement of display board wiring with 7/20 wire as per circuit 2 of drawing no. V2k/SCO IP - 17/33. EACH EACH EACH EACH LS
Four Thousand only Seven Hundred and Eighty only Forteen Thousand Eight Hundred and Fifty only Two Thousand Three Hundred and Seventy Six only Nine Thousand One Hundred and Eight only Forteen Thousand and Twenty Seven only Seven Thousand Nine Hundred and Twenty only Three Thousand and Thirty Six only Two Thousand Three Hundred and Seventy Six only Three Thousand Seven Hundred and Ninety Seven 0nly Two Thousand Two Hundred and Seventy Eight only Eight Hundred and Twenty Three only One Thousand Nine Hundred and Seventy Two only Eight Hundred and Sixty only Two Thousand and Fifty Eight only One Thousand Six Hundred and Eight only Two Thousand One Hundred and Seventy Two only One Thousand Nine Hundred and Ten only Three Hundred and Seventeen only Two Hundred and Seventy One only Six Hundred and One only One Thousand Four Hundred and Sixteen only Eight Hundred and Fifty Eight only
v vi vii viii ix
1426
LS
3,797
1427
xi
LS
2,278
1428 1429
B i ii
Under Canopy Light Replacement of 150W metal halide lamp of approved make. ( with MHL EACH lamps) Replacement of 150W metal halide lamp of approved make. ( with CDMTT EACH lamps) Replacement of 250W metal halide lamp of approved make. ( with MHL EACH lamps) Replacement of 250W metal halide lamp of approved make. ( with CDMTT EACH lamps) Replacement of ballast for 150W metal halide lamp. EACH Replacement of ballast for 250W metal halide lamp. EACH
iii iv v vi
1434 1435
Replacement of Electronic ignitor for 150W / 250W metal halide lamp. Replacement of capacitor for 150W / 250W metal halide lamp. Yard Lights 125 watt HPMV lamp of approved make. 250 watt HPMV lamp of approved make. 250 watt MH lamp of approved make. Ballast for 125 watt HPMV lamp.
EACH EACH
61
ITEM CODE
Sl. No.
v vi vii viii ix D i ii iii iv v vi vii viii ix x a) b) xi a) b) xii a) b) xiii a) b) xiv xv
DESCRIPTION
Ballast for 250 watt HPMV lamp. Replacement of ballast for 250W metal halide lamp. Capacitor for 125 watt HPMV lamp. Capacitor for 250 watt HPMV lamp. Replacement of capacitor for 250W metal halide lamp. Electrical Fittings/Fixtures Replacement of tube lights with 36W Trulite Philips. Low loss choke 36W (6 watts loss). Replacement of low loss Electronic Ballast 36/40 watts. Starter philips make. Press fit holder for tube lights. Bakelite sheet for chokes. PVC saddles to hold tube lights. PVC insulated copper wire 2.5 sq.mm. BIS approved. PVC insulated copper wire 4 sq. mm. BIS approved. T5 (14W) tube light 600 mm. In sales building etc. In RVI Elements T5 (28W) tube light 1200 mm. In sales building etc. In RVI Elements. PL7 CFL light. In sales building etc. In RVI Elements PL9 CFL light. In sales building etc. In RVI Elements 250 W metal halide external fittings with lamp for monolith front lighting. Replacement of Choke/Ballast for 250W MH lamp for monolith front lighting.
Unit
Rate (Rs.)
1,307 2,116 304 317 304
1445 1446 1447 1448 1449 1450 1451 1452 1453 1454 1455
1456 1457
EACH EACH
170 190
1458 1459
EACH EACH
108 133
Replacement of 250W metal halide lamp of approved make for monolith front EACH lighting. Replacement of Choke/Ballast for T5 (14W) tube light. In sales building etc. In RVI Elements. T5 (28W) tube light. In sales building etc. In RVI Elements.
1,972
1465 1466
EACH EACH
773 806
Seven Hundred and Seventy Three only Eight Hundred and Six only Eight Hundred and Forty only Eight Hundred and Seventy Three only Sixteen Thousand Three Hundred and Eighty only Six Thousand Four Hundred and Thirty Five only Three Thousand Five Hundred and Ten only
1467 1468
EACH EACH
840 873
1469
1470
b)
SPRAY PAINTING Spray painting of the entire exposed FRP surface of the Main Signage with one coat of clear coat and one coat of polyurethane paint (make MRF) of 30 EACH micron thickness of approved colour including all charges. Spray painting of the exposed FRP surface of the Scaled Down Signage with one coat clear coat and one coat of polyurethene paint (make MRF) of EACH approved colour having minimum thickness as 30 micron. Spray painting of the exposed FRP surface of the yard light poles with one coat of clear coat and one coat of polyurethene paint (make MRF) of EACH approved colour having minimum thickness as 30 micron.
16,380
6,435
1471
c)
3,510
62
ITEM CODE
Sl. No.
5 a
DESCRIPTION
PAINTING OF HOARDING BOARD. Painting the hoarding board with two coats of synthetic enamel paint over one coat of cement primer/zinc phosphate primer including necessary lettering, art work as required for IOCL advertisements, etc. all complete on the new surface. Repainting the hoadring boards with one coat of base paint and necessary lettering ,Art work etc., as required for IOCl advertisements Supplying &replacing the damaged Aluminium/Steel false ceiling panels for the existing canopies. This item shall be operated if the area of ceiling to be replaced is less than 10 sqm per site.
Unit
Rate (Rs.)
1472
SQM
128
One Hundred and Twenty Eight only one hundred only Two thousand Five Hundred and Thirty only
1473
SQM
100
1474
SQM
2,530
63