Professional Documents
Culture Documents
Communication
Dr. Ir. Zulfajri Basri Hasanuddin, M.Eng
Dept. of Computer Science and Communication Engineering,
Kyushu University
Dept. of Electronic, Faculty of Engineering,
Hasanuddin University
(a)
c) Fleetsatcom d) TDRSS
(e)
(f)
e) DSCS-III, f) Intelsat VI
10
11
Contents
1. Purpose of the Package
2. Why ETS-VIII now?
3. Outline of ETS-VIII
4. Mission Payloads
5. Experiment Plan
6. Antenna Coverage
7. How to Utilize ETS-VIII?
8. Sample of Experiments
9. Finding Out More
2. GIGABIT Satellite
4. ETS-VIII Proposal
Experiment Subject
--------------------Experiment Abstract
----------------------Experiment System
---------------------
3. Q and A for
Experiments
5. GIGABIT Proposal
Experiment Subject
--------------------Experiment Abstract
----------------------Experiment System
---------------------
1970s
Satellite Segment
1960s
700 kg
40 kg
0.6m
1980s
1990s
21st Century
1500 kg
970 kg
5.3m
15.6m
21,8 m
INTELSAT I
LEO (Iridium,
Globalstar,
ODESSY, ICO,
Etc)
INTELSAT IV
INTELSAT-V
Earth Station
INTELSAT VII
Fixed Communication
Mobile Communication
Personal Mobility
It is necessary to
develop the technology
of mobile satellite
communications by
GEO to cover the
mobile communication
traffic in densely
populated country
like Japan.
What is IMT-2000
IMT-2000:
IMT-2000 is an initiative of the ITU
wireless access to the global telecommunication infrastructure through
both satellite and terrestrial systems,
serving fixed and mobile users in
public and private networks.
The ITU vision of global wireless
access in the 21st century, including
mobile and fixed access, aims at
providing direction to the many
related technological developments
in this area to assist the standardization of these essentially competing
wireless access technologies.
ETS-VIII Objectives
The ETS-VIII is developed to establish and verify the following technologies:
An advanced 3-ton class spacecraft bus
Large scale deployable reflector, worlds largest and most advanced
Mobile satellite communication system technology that will enable audio/data communications with
hand-held terminals.
Mobile satellite multimedia broadcasting system technology for sound and image transmission.
Satellite positioning using the High Accuracy Clock
S-Band Mobile
Communication
&
Broadcasting
System
Mission Payloads
Mobile handy-held
Telephone
Mobile
Satellite
Communicati
ons &
Broadcasting
System
Mobile Digital
Multimedia
Broadcasting
Decreasing the
Time Delay
On-board
Packet
Switching
Counter measure
for
Disaster
Antenna Coverage
Hand-held Terminal: Size equivalent to
a portable telephone
Portable Terminal: Size equivalent to the
terminal of N-STAR
(Notebook computer size)
Mobile Station : Use high-gain antenna
such as parabolic (1 m)
Sample of Experiments
6. Interferensi Re-Transmit
Interferensi Cross-Polarisasi
Bandwidth transponder
Guard band
Bandwidth transponder
Guard band
Terestrial Network
Contoh, kita mempunyai dua buah carrier dengan alokasi bandwidth dari masing-masing adalah
120 KHz dan 180 KHz, jika alokasi center frekuensi dari carrier pertama di frekuensi 3720 MHz,
supaya tidak terjadi gangguan antar channel maka alokasi center frekuensi dari carrier kedua
adalah di (3720+(120/2)+(180/2))MHz=3620.150 MHz, namun bila alokasi center frekuensi
carrier kedua diletakkan pada 3720.140 MHz maka akan terjadi gangguan antar channel sebesar
10 KHz dari kedua carrier tersebut.
Pendahuluan
600
Freespace
400
Ionosphere
90
Troposphere
Earths space
Physical cause
Atmospheric gases,
cloud, rain
Rain, ice crystals
Prime importance
Atmospheric Losses
absorption.
(2.1)
Ionospheric Effects
Rain Attenuation
(1.16)
(1.17)
Thermal Noise
Thermal noise adalah noise yang terjadi pada semua media transmisi dan dalam semual peralatan
komunikasi yang timbul dari pergerakan elektron secara acak.
Thermal noise adalah proporsional terhadap bandwidth dan temperature.
Pn kT (W/Hz)
dimana : k konstanta Boltzman 1.3803(10-23 ) J/K
T absolute temperature (K) of thermalnoise
Pada temperatur ruang, T 17 C atau 290 K ,
Pn 4.00(10 21 ) W/Hz of bandwidth
- 204 dBW/Hz of bandwidth
- 174 dBm/Hz of bandwidth
Pn kTB (W)
B merefer disini kepada apa yang dinamakan noise bandwidth (Hz). Pada 0 K
Signal 1000 Hz mempunyai SNR 10 dB. Level noise adalah 5 dBm dan signal, 15 dBm.
System Noise
Sumber utama noise listrik pada peralatan adalah yang muncul dari gerakan
elektron-elektron secara acak pada berbagai peralatan resistive dan active
pada penerima. Thermal noise juga dibangkitkan dari komponen-komponen
antenna yang mengalami lossy.
Daya noise (noise power) dari sumber noise thermal diberikan oleh:
PN kTN BN
TN
(1.18)
PN
kTN
BN
joules
N0
(1.19)
Example:
An antenna has noise temperature of 35 K, and is matched into a receiver
which has a noise temperature of 100 K. Calculate (a) the noise power
Density and (b) the noise power for a bandwidth of 36 MHz.
Solution:
(a) N0 (35 100) 1.38 10- 23 1.86 10- 21 J
(b) PN 1.86 36 106 0.067 pW
Noise Antena
Noise antena bisa secara luas diklasifikasikan ke dalam dua grup: noise yang
berasal dari rugi-rugi antena (antenna losses) dan sky noise.
Sky noise adalah term yang digunakan untuk menggambarkan radiasi
gelombang mikro yang terdapat pada alam semesta.
Tant
N 0,in
N 0,1
0, out
(a)
Amplifier 1
G1
Te1
Tant
0,2
Amplifier 2
Te
G2
Te2
0, out
(b)
N 0,ant kTant
(1.20)
Output noise energy adalah: N 0,out GN 0,ant ditambah kontribusi yang dihasilkan oleh amplifier. Semua noise
Amplifier, yang terjadi pada amplifier merujuk kepada equivalent input temperatur noise (equivalent input noise
Temperature, Te . Output noise menjadi
N 0,out Gk (Tant Te )
(1.21)
N 0,in
Te
N 0,out
G
k (Tant Te )
(1.22)
bisa didapat dari pengukuran, tipikal nilainya berada pada range 35 hingga 100 K.
Amplifiers in Cascade
Koneksi cascade diperlihatkan pada gambar (b). Keseluruhan gain nya adalah:
G G1G2
(1.23)
Noise energi amplifier 2 merujuk pada inputnya adalah kTe 2 . Noise input amplifier 2 dari stage sebelumnya adalah
, dan selanjutnya total noise energy merujuk pada input amplifier 2 adalah:
1
ant
e1
G k (T T )
(1.24)
Noise energy ini bisa dihubungkan dengan noise energy pada input amplifier 1 dengan membaginya dengan power
gain amplifier 1,
N 0,1
N 0, 2
G1
k (Tant Te1
Te 2
)
G1
(1.25)
N 0,1 kTs
(1.26)
Ts Tant Te1
T s dengan
Ts
diberikan oleh
Te 2
G1
(1.27)
Dari hasil ini dapat dikembangkan untuk beberapa stages dalam cascade,
Ts Tant Te1
Te 2
T
e3
G1 G1G2
(1.28)
Noise Factor
Output noise dari amplifier adalah:
N 0,out FGkT0
(1.29)
G adalah power gain amplifier, F adalah noise factor. Selanjutnya dapat ditulis hubungan:
Gk (T0 Te ) FGkT0
Te ( F 1)T0
(1.30)
(1.31)
Noise Figure adalah merupakan noise factor F yang diekspresikan dalam decibels:
(1.32)
Example:
An LNA is connected to a receiver which has a noise figure of 12 dB. The gain
of the LNA is 40 dB and its noise temperature is 120 K. Calculate the overall
noise temperature referred to the LNA input.
Solution:
12 dB is a power ratio of 15.85:1, and therefore
4306
120.43 K
10000
N 0,out
kTx
kTNW,0
L
(1.33)
Mari menginisialkan jaringan pada temperatur yang sama Tx sebagai sumber. Sebab jaringan
terhubung dengan sumber, energy noise pada output diberikan oleh kTx, selanjutnya:
kTx
kTx
kTNW,0
L
atau
1
TNW,0 Tx 1
L
(1.34)
TNW,i LTNW,0 Tx ( L 1)
(1.35)
Jika lossy network harus terjadi pada kondisi temperatur ruangan, yaitu Tx=To, maka perbandingan
persamaan (1.31) dan (1.35) menunjukkan bahwa
FL
(1.36)
Ini menunjukkan bahwa pada temperatur ruangan, noise factor pada lossy network sama dengan
Power loss nya.
cable
LNA
G1
Te1
Tant
Loss L:1
Receiver
Noise factor
F
(a)
Tant
Input
cable
LNA
G1
Te1
Loss L:1
Receiver
Noise factor
F
(b)
Gambar Koneksi-koneksi yang digunakan untuk menggambarkan
Overall noise temperature system.
Figure (a) diatas memperlihatkan tipikal sistem penerima. Sistem noise temperature pada input,
TS Tant Te1
( L 1)T0 L( F 1)T0
G1
G1
(1.37)
Example:
For the system shown in Figure (a) above, the receiver noise figure is 12 dB, the cable loss is 5 dB,
The LNA gain is 50 dB, and its noise temperature 100 K. The antenna noise temperature is 35 K.
Calculate the noise temperature referred to the input.
Solution:
F 101.2 15 .85 . For the cable, L 10 0.5 3.16 . For the LNA, G 10 5. Hence
(3.16 1) 290 3.16 (15 .85 1) 290
TS 35 100
135 K
10 5
10 5
Example:
Repeat the calculation when the system of Fig. (a) is arranged as shown in Fig. (b).
Solution:
In this case the cable precedes the LNA and therefore the equivalent noise temperature referred
to the cable input is
(1.38)
C
N EIRP GR LOSSES k TS BN
(1.39)
Ratio G/T adalah merupakan parameter kunci dalam menentukan performansi sistem
penerima. Gain antena GR dan sistem noise temperatur TS bisa dikombinasikan
dalam persamaan (1.39) sebagai
G / T GR TS
dBK -1
(1.40)
C
G
EIRP
N
T LOSSES k BN
(1.41)
PR
Rasio carrier power terhadap noise power density N 0 boleh jadi merupakan
kuantitas yang secara aktual dibutuhkan. Dari PN kTN BN N 0 BN maka kemudian
C C C
N N B N BN
0 N 0
Dan kemudian
C C
BN
N0 N
(1.42)
[C/N] adalah rasio power yang sebenrnya dalam unit decibels, dan BN dalam
decibels relatif terhadap satu hertz, atau dBHz. [C/N0] dalam dBHz.
Substitusi pers (1.41) kedalam pers (1.42) menghasilkan:
C
G
EIRP
T LOSSES k
N
0
dBHz
(1.43)
Example
In a link budget calculation at 12 GHz, the free-space loss is 206 dB, the
antenna pointing loss is 1 dB, and the atmospheric absorption is 2 dB. The
receiver G/T ratio is 19.5 dB/K and receiver feeder losses are 1 dB. The EIRP
is 48 dBW. Calculate the carrier-to-noise spectral density ratio.
Solution
The data are best presented in tabular form, and in fact lend themselves readily to spreadsheet-type
computations. For brevity the units are shown as decilogs and losses are entered as negative numbers
to take account of the minus sign in eq. ( 1.43). Recall that Boltzmanns constant equates to -228.6
decilogs., so that [k]=228.6 decilogs as shown in the table. Entering data in this way allows the final
result to be entered in a table cell as the sum of the terms in the rows above the cell, a feature
usually incorporated in spreadsheets and word processors. This is illustrated in the following table.
Quantity
Free-space loss
Atmospheric absorption loss
Antenna pointing loss
Receiver feeder losses
Polarization mismatch loss
Receiver G/T ratio
EIRP
-[k]
[C/No],Eq.(1.43)
Decilogs
-206.00
-2.00
-1.00
-1.00
0.00
19.50
48.00
228.60
86.10
The final result, 86.10 dBHz, is the algebraic sum of the quantities as given in eq. (1.43).
The Uplink
Uplink memiliki pengertian dimana disatu sisi stasiun bumi memancarkan signal dan disisi lain satelit
menerima signal dari stasiun bumi tersebut. Pers (1.43) bisa diaplikasikan untuk uplink dengan
memberikan subscript U untukmenyatakan pengertian uplink. Persamaan (1.43) menjadi:
C
G
EIRP
U
T LOSSESU k
N
U
0 U
dBHz
(1.44)
Pada pers (1.44), nilai-nilai yang digunakan adalah EIRP stasiun bumi, satellite receiver feeder losses,
dan satellite receiver G/T. Free-space loss dan losses lain yang bergantung frekuensi, dihitung untuk
frekuensi uplink.
Flux density yang dibutuhkan pada antena penerima untuk menghasilkan saturasi
dari TWTA (traveling wave tube amplifier) disebut saturation flux density.
Saturation flux density adalah sebuah kuantitas yang penting dalam perhitungan
link budget, dan dengan mengetahuinya, kita dapat menghitung EIRP yang
dibutuhkan pada stasiun bumi. Untuk memperlihatkan ini, kita lihat lagi pers
berikut:
EIRP
4r 2
Dalam decibels,
M EIRP 10log
1
4r 2
(1.45)
2
1
FSL 10 log
10 log
4
4r 2
2
M EIRP FSL 10 log
4
(1.46)
(1.47)
2
A0 10 log
4
(1.48)
(1.49)
(1.50)
(1.51)
(1.52)
(1.53)
Example
An uplink operates at 14 GHz, and the flux density required to saturate the
transponder is -120 dB(W/m2). The free space loss is 207 dB, and the other
propagation losses amount to 2 dB. Calculate the earth-station [EIRP] required
for saturation, assuming clear sky conditions. Assume [RFL] is negligible.
Solution
At 14 GHz,
dB
The losses in the propagation path amount to207 2 209 dB. Hence, from Eq. (1.53),
EIRPS U 120 44.37 209 44.63 dBW
Input back-off
EIRP U EIRP S U BO i
(1.54)
C
G
BO
i
S
0
T k RFL
N
U
0 U
(1.55)
Example
An uplink at 14 GHz requires a saturation flux density of -91.4 dBW/m2 and
an input back-off of 11 dB. The satellite G/T is -6.7 dBK-1 and receiver feeder
losses amount to 0.6 dB. Calculate the carrier-to-noise density ratio.
Solution
Quantity
Saturation flux density
Decilogs
- 91.4
A0 at 14 GHz
- 44.4
- 11.0
Satellite saturation G / T
- k
- 6.7
228.6
- 0.6
Total
74.5
The total gives the carrier - to - noise density ratio at the satellite receiver as 74.5 dBHz.
(1.56)
HPA,sat
P BO
HPA
HPA
(1.57)
Homework
1. Two amplifier are connected in cascade, each having a gain of 10 dB and
noise temperature of 200 K. Calculate (a) the overall gain and (b) the
effective noise temperature reffered to input.
2. An amplifier having a noise temperature of 200 K has a 4 dB attenuator
connected at its input. Calculate the effective noise temperature reffered
to the attenuator input.
3. A receiving system consists of an antenna having a noise temperature of
60 K, feeding directly into a low noise amplifier (LNA). The amplifier has
a noise temperature of 120 K and a gain of 45 dB. The coaxial feeder
between the LNA and the main receiver has a loss of 2 DB, and the main
receiver has a noise figure of 9 dB. Calculate the system noise
temperature reffered to input.
4. An antenna having a noise temperature of 35 K is connected through a
feeder having 0.5 dB loss to an LNA. The LNA has a noise temperature of
90 K. Calculate the system noise temperature reffered to (a) the feeder
input and (b) the LNA input.
Downlink
Downlink memiliki pengertian dimana disatu sisi satelit memancarkan signal dan di sisi lain
stasiun bumi menerima sinyal yang dipancarkan tersebut. Persamaan (1.43) bisa
diaplikasikan untuk downlink, tetapi subscript D akan digunakan untuk menyatakan
downlink. Persamaan (1.43) menjadi
C
G
EIRP
D
T LOSSESD k
N
D
0 D
dBHz
(1.58)
Nilai-nilai yang digunakan pada persamaan di atas adalah EIRP satelit, RFL stasiun bumi,
dan penerima G/T stasiun bumi. Free-space dan rugi-rugi lain dihitung untuk frekuensi
downlink. Hasil carrier to noise density ratio dari pers (1.58) adalah yang muncul pada
Detektor penerima stasiun bumi. Selanjutnya dengan mengasumsikan signal bandwidth B
sama dengan noise bandwidth BN:
C
G
EIRP
D
N
T LOSSES
D
D
D k B
(1.59)
Example
A satellite TV signal occupies the full transponder bandwidth of 36 MHz, and
it must provide a C/N ratio at the destination earth station of 22 dB. Given
that the total transmission losses are 200 dB and the destination earth
station G/T ratio is 31 dB/K, calculate the satellite EIRP required.
Solution
From Eq. (1.59),
EIRPD C
G
LOSSESD k B
N D T D
setting this up in tabular form, and keeping in mind that k -228.6dB
and that losses are numerically equal to 200 dB, we obtain
Quality
C / N
- G / T
LOSSES
k
B
EIRP
Decilogs
22
- 31
200
- 228.6
75.6
38
Output Back-off
Jika EIRP satelit untuk kondisi saturasi dilambangkan sebagai [EIRPS]D, maka
[EIRP]D=[EIRPS]D-[BO]o dan Eq. (1.58) menjadi
C
G
EIRPS D BO o LOSSESD k
T D
N0 D
saturation point
5 dB
Output dBm
(1.60)
single carrier
multiple carrier
[BO]O
[BO]i
Back-off
operating point
Input dBm
Figure: Input and Output Back-off relationship for the satellite TWTA,
[BO]i=[BO]o+5dB.
Example
The specified parameters for a downlink are satellite saturation value of EIRP,
25 dBW; output back-off, 6 dB; free-space loss, 196 dB; allowance for other
downlink losses, 1.5 dB; and earth station G/T, 41 dB/K. Calculate the carrier
to noise density ratio at the earth station.
Solution
As with theuplink budget calculations the workis best set out in tabular form
with the minus signs in Eq. (1.60) attached to the tabulated values.
Quantity
Satellite saturation [EIRP]
Decilogs
25.0
Free - spaceloss
Other losses
Output back - off
- 196.0
- 1.5
- 6.0
41.0
228.6
Total
91.1
The total gives the carrier tonoise density ratio at the earth station in dBHz,
as calculated from Eq. (1.60)
(1.61)
PTWTA S PTWTA BO o
(1.62)
Example
A satellite is operated at an EIRP of 56 dBW with an output back-off of 6 dB.
The transmitter feeder losses amount to 2 dB, and the antenna gain is 50 dB.
Calculate the power output of the TWTA, assuming it may be required to
provide the full saturated EIRP.
Solution
Eq. (1.61) gives
PTWTA S 8 6 14 dBW
(or 25 W)
1
TRAIN Ta 1
A
(1.63)
(
A
1
)
TS, CS
C RAIN C CS
(1.64)
CS: subscript kondisi clear-sky dan TS,CS: system noise temperature dalam
kondisi clear-sky
Example
Under clear-sky conditions the downlink [C/N] is 20 dB, the effective noise
temperature of the receiving system being 400 K. If rain attenuation exceeds
1.9 dB for 0.1% of the time, calculate the value below which [C/N] falls for
0.1% of the time. Assume Ta = 280 K.
Solution
1.9 dB attenuation is equivalent to a 1.55:1 power loss. The equivalent noise
temperature of the rain is therefore
TRAIN = 280(1 - 1/1.55) = 99.2 K
The new system noise temperature is 400 + 99.2 = 499.2 K. The decibel
increase in noise power is therefore [499.2] [400] = 0.96 dB. At the same
time, the carrier is reduced by 1.9 dB and therefore the [C/N] with 1.9 dB
rain attenuation drops to 20 1.9 0.96 = 17.14 dB. This is the value below
which [C/N] drops for 0.1% of the time.
N0 N0 N0
C C U C D
(1.65)
Example
For a satellite circuit the individual link carrier to noise spectral density ratios
are: uplink 100 dBHz; downlink 87 dBHz. Calculate the combined C/N0 ratio.
Solution
N0
1010 108.7 2.095 109
C
Therefore
C
-9
10log2.09510 86.79 dBHz
N0
Example
A multiple carrier satellite circuit operates in the 6/4 GHz band with the
following characteristics. Uplink: saturation flux density -67.5 dBW/m2;
input back-off 11 dB; satellite G/T -11.6 dB/K. Downlink: satellite saturation
EIRP 26.6 dBW; output back-off 6 dB; free-space loss 196.7 dB; earth
station G/T 40.7 dB/K. For this example, the other losses may be ignored.
Calculate the carrier to noise density ratios for both links and the combined
value.
Solution
Uplink
Decilog values
Saturation flux density
- 67.5
A0 at 6 GHz
- 37
Input back - off
- 11
- 11.6
228.6
101.5
Downlink
Satellite [EIRP]
Output back - off
Decilog values
26.6
-6
- 196.7
40.7
228.6
93.2
Intermodulation Noise
Intermodulation terjadi dimana sejumlah carrier melewati rangkaian dengan karkteristik yg
non linier. Dalam sistem komunikasi satelit, biasanya terjadi pada TWTA pada satelit.
Amplitudo dan fasa yang non linier dapat menyebabkan intermodulasi.
Eq. (1.65) selanjutnya dapat dituliskan:
N0 N0 N0 N0
C C U C D C IM
N N N N
C C U C D C IM
(1.66)
(1.67)
Example
For a satellite circuit the carrier to noise ratios are: UL 23 dB, DL 20 dB,
intermodulation 24 dB. Calculate the overall CNR in decibels.
Solution
From Eq. (1.66),
N
10 2.4 10 2.3 10 2 0.0019
C
Therefore
C
N 10log0.0019 17.2 dB
Satellite Access
Ada 3 metode multiple access yang sering digunakan:
frequency-division multiple access (FDMA)
time-division multiple access (TDMA)
code-division multiple access (CDMA)
FDMA
Masing-masing stasiun dalam kelompok tertentu mengirim frekuensi tertentu (uplink)
yang sudah dipilih serta seri-seri yang unik. Pemancar memadukan (multiplex) frekuensi
ini dan mengirimkannya ke satelit beserta transpondernya sebagai pesan campuran
(composite inteligence), lalu menerjemahkan ke frekuensi tersebut dan menyiarkan
kembali (rebroadcast) ke stasiun penerima di bumi dalam frekuensi yang lain.
TDMA
TDMA adalah metode transmisi uplink satelit yang agak berbeda dengan FDMA karena
modulasi pada berbagai pembawa sampai ke satelit dari pemancar dalam bentuk burst.
Berlawanan dengan FDMA, pada suatu saat hanya satu paket informasi yang mencapai
satelit, konsekuensinya tidak terdapat pembagian daya ataupun intermodulasi, baik pada
pengiriman maupun pada stasiun penerima. Dengan demikian transponder dapat dioperasikan pada daya keluaran penuh tanpa distorsi. Sehingga kapasitasnya menjadi lebih
besar dibandingkan keluaran satelit dengan FDMA.
CDMA
Dalam CDMA, semua stasiun memancar pada frekuensi dan waktu yang bersamaan.
Keistimewaannya, is dirancang sedemikian rupa dimana masing-masing transmisi
memiliki kode-kode uniknya sendiri. Misalnya is bisa berupa kode pseudo-noise, yg
tidak dapat diuraikan (decode) oleh penerima yang tidak memiliki perlengkapan yang
cukup untuk mendeteksi dan memproduksi pesan-pesan asli.
Example
A satellite transponder has a bandwidth of 36 MHz and a saturation EIRP of
27 dBW. The earth station receiver has a G/T ratio of 30 dB/K, the total
link losses are 196 dB
Transponder bandwidth :
BTR 36 MHz,
Carrier bandwidth :
B 3 MHz,
B 10log
Hz
Saturation EIRP :
EIRP 27
G / T 30
C / N D EIRPS G / T LOSSES 228.6 BTR
C / N D 14
BO0
K BTR B
K
K 10 10 ,
K 3
If back - off was not required, the number of carriers which could be accomodated would be :
BTR
12
B