Professional Documents
Culture Documents
Reference :
IS-HN-D1278-2015
Date :
10 March, 2015
Project :
Contractor :
Vision Etimaad
Consultant :
Dar Al-Handasah
sa.tso@hilti.com
CONTENT
1. Seismic calculation
2. Summary sheet
3. PROFIS reports
Normal support
45
232
415
4. Anchor studies
630
5. Technical Data
666
www.hilti.sa
sa.tso@hilti.com
Seismic Calculations
www.hilti.sa
sa.tso@hilti.com
IS-HN-D1278-2015
Where:
Fp
Wp
0.4
1+2
: Seismic design force centered at the component's center of gravity and distributed relative to component's mass distribution
: Component operating weight
S DS
ap
Ip
Rp
: Component importance factor that varies from 1.00 to 1.50 (see Section 12.1.5)
: Component response modification factor that varies from 1.50 to 5.00 (select appropriate value from Tables 12.2.2 or 12.3.2)
: Height in structure of point of attachment of component with respect to the base. For items at or below the base, z shall be taken
as 0. The value of z/h need not exceed 1.0
Where:
S DS
S D1
Site Coefficients and Adjusted Maximum Considered Earthquake Spectral Response Acceleration Parameters.
Where:
S MS
= 1
: the maximum considered earthquake, 5% damped, spectral response acceleration at short periods adjusted for site class effects
as defined in Section 9.4.3
: the maximum considered earthquake, 5% damped, spectral response acceleration at a period of 1 sec adjusted for site class
effects as defined in Section 9.4.3
: the mapped maximum considered earthquake spectral response acceleration at short periods as determined in accordance with
Section 9.4.1 where site coefficients Fa and Fv are defined in Table 9.4.3a and Table 9.4.3b, respectively.
: the mapped maximum considered earthquake spectral response acceleration at a period of 1-sec as determined in accordance
with Section 9.4.1
: acceleration-based site coefficient (at 0.2-sec period)
S M1
SS
S1
Fa
Fv
Fa
1.2
and
Fv
1.7
From map: Regions for Determination of Maximum Considered Earthquake Ground Motion in the Kingdom of Saudi Arabia.
Riyadh
for
Region
From map: Maximum Considered Earthquake Ground Motion for the Kingdom of 0.2 SEC Spectral Response Acceleration (Ss in %g)
SS =
25.0%
S MS =
0.30
S DS =
0.20
From map: Maximum Considered Earthquake Ground Motion for the Kingdom of 1 SEC Spectral Response Acceleration (S1 in %g)
S1 =
11.0%
S M1 =
0.19
S D1 =
Ip =
1.5
0.12
ap
Rp =
2.5
180.00
180.00
ap
1.00
S DS =
Ip =
Rp =
0.20
1.50
2.50
and
Fp =
Wp
Fp
0.09
Wp
Wp
0.144
Fp = 14.4%
Wp
IS-HN-D1278-2015
Summary sheet
www.hilti.sa
sa.tso@hilti.com
IS-HN-D1278-2015
IS-HN-D1278-2015
32
65
100
150
250
300
450
www.hilti.sa
Pipe Size
[mm]
Case
No.
311
150.4
112.4
46.2
39.2
18.3
7.0
Total
Weight
[kg/m]
18.80 x 2
23.325 x 2
1.5
14.05 x 2
5.77 x 2
4.90 x 2
2.287 x 2
0.875 x 2
2.5
2.5
2.5
2.5
2.5
2.5
Normal Span
[m]
HKD M6x30
(67.3%)
HKD M8x30
(81.7%)
HKD M12x50
(81.67%)
HKD M12x50
(96.16%)
HKD M16x65
(65.6%) x 2
HKD M16x65
(89.8%) x 2
HST M16
(81.5%) x 2
7.5
7.5
7.5
7.5
7.5
10
10
Seismic Span
[m]
sa.tso@hilti.com
3.3588
1.6243
1.2139 x 2
0.4989 x 2
0.4233 x 2
0.2635 x 2
0.1008 x 2
Seismic force
[kN]
Each normal trapeze will carry two pipes (Supply and Return).
Anchor
Utilization [%]
HKD used M6x25 with 1.3 kN design load, M8x30 with 2.8 kN design Load, M12x50 with 6 kN design load and M16x65 with 10.7 kN.
IS-HN-D1278-2015
32
65
100
150
250
300
450
www.hilti.sa
Pipe Size
[mm]
Case
No.
311
150.4
112.4
46.2
39.2
18.3
7.0
Total
Weight
[kg/m]
1.5
2.5
2.5
2.5
2.5
2.5
2.5
Normal Span
[m]
23.325 x 2
18.80 x 2
14.05 x 2
5.77 x 2
4.90 x 2
2.287 x 2
0.875 x 2
Normal Load
[KN]
HKD M6x30
(67.3%)
HKD M8x30
(81.7%)
HKD M12x50
(81.67%)
HKD M12x50
(96.16%)
HKD M16x65
(65.6%) x 2
HKD M16x65
(89.8%) x 2
HST M16
(81.5%) x 2
3.0
7.5
10
10
10
10
10
Seismic Span
[m]
sa.tso@hilti.com
1.3435
1.6254
1.6185
0.6652
0.5644
0.2635 x 2
0.1008 x 2
Seismic force
[kN]
Each normal trapeze will carry two pipes (Supply and Return).
Anchor
Utilization [%]
HKD used M6x25 with 1.3 kN design load, M8x30 with 2.8 kN design Load, M12x50 with 6 kN design load and M16x65 with 10.7 kN.
IS-HN-D1278-2015
32
65
100
150
250
300
450
www.hilti.sa
Pipe Size
[mm]
Case
No.
311
150.4
112.4
46.2
39.2
18.3
7.0
Total
Weight
[kg/m]
1.5
2.5
2.5
2.5
2.5
2.5
2.5
Normal Span
[m]
23.325 x 2
18.80 x 2
14.05 x 2
5.77 x 2
4.90 x 2
2.287 x 2
0.875 x 2
Normal Load
[KN]
HKD M6x30
(67.3%)
HKD M8x30
(81.7%)
HKD M12x50
(81.67%)
HKD M12x50
(96.16%)
HKD M16x65
(65.6%) x 2
HKD M16x65
(89.8%) x 2
HST M16
(81.5%) x 2
1.5
10
10
7.5
10
10
10
Seismic Span
[m]
sa.tso@hilti.com
0.6717
2.1657
1.6185
0.4989 x 2
0.5644 x 2
0.2635 x 2
0.1008 x 2
Seismic force
[kN]
Each normal trapeze will carry two pipes (Supply and Return).
Anchor
Utilization [%]
HKD used M6x25 with 1.3 kN design load, M8x30 with 2.8 kN design Load, M12x50 with 6 kN design load and M16x65 with 10.7 kN.
IS-HN-D1278-2015
www.hilti.sa
Pipes
sa.tso@hilti.com
PROFIS reports
www.hilti.sa
sa.tso@hilti.com
IS-HN-D1278-2015
Normal support
www.hilti.sa
sa.tso@hilti.com
IS-HN-D1278-2015
Contact:
Page:
1 of 5
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
26-Feb-15
Beam MM-C-30 OK
Selected beam
Channel
MM-C-30
Length
Rotation
Iy
Iz
[m]
[cm]
[cm4]
[cm4]
[kN/m]
0.40
100
1.2
1.58
190,000,000.000
Supports
Support
Span
No.
A [m]
L [m]
0.05
0.30
0.35
0.05
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
10
Contact:
Page:
2 of 5
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
26-Feb-15
(Design load)
Loads
Single loads
Position
No.
Forces [kN]
[m]
0.15
0.0000
0.8750
0.25
0.0000
0.8750
Calculation summary
Beam MM-C-30 OK
Deflection utilization [%]
17.31
47.15
Detailed results
(Design load)
Support
Length
Bending moment
Bending stress
Deflection
position
[m]
[kN]
[kNm]
[kN/m]
[mm]
[m]
Z
0.05
0.05
0.8770
0.8770
0.05
Mz
-0.1
0.0900
123,920.000
0.3
-0.1
0.0000
0.30
0.35
My
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
11
Contact:
Page:
3 of 5
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
26-Feb-15
Diagrams / Charts
Planning view
Bending moment
Deflection
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
12
Contact:
Page:
4 of 5
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
26-Feb-15
Calculation factors:
Load type:
Design load
LC1: g
LC2: q
1.1
1.5
1.35
Load combinations:
ULS1 = 1.35*LC1+1*LC2
SLS1 = (LC1+LC2)/1.5
Maximum beam allowable deflection:
200
150
1.5
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
13
Contact:
Page:
5 of 5
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
26-Feb-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
14
Contact:
Page:
1 of 5
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
26-Feb-15
Beam MM-C-36 OK
Selected beam
Channel
MM-C-36
Length
Rotation
Iy
Iz
[m]
[cm]
[cm4]
[cm4]
[kN/m]
0.48
159
3.01
2.73
190,000,000.000
Supports
Support
Span
No.
A [m]
L [m]
0.05
0.38
0.43
0.05
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
15
Contact:
Page:
2 of 5
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
26-Feb-15
(Design load)
Loads
Single loads
Position
No.
Forces [kN]
[m]
0.17
0.0000
2.2875
0.30
0.0000
2.2875
Calculation summary
Beam MM-C-36 OK
Deflection utilization [%]
28.98
72.29
Detailed results
(Design load)
Support
Length
Bending moment
Bending stress
Deflection
position
[m]
[kN]
[kNm]
[kN/m]
[mm]
[m]
Z
0.05
0.05
2.3520
2.2320
0.05
Mz
-0.2
0.2900
-190,300.000
0.6
-0.2
0.0000
0.38
0.43
My
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
16
Contact:
Page:
3 of 5
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
26-Feb-15
Diagrams / Charts
Planning view
Bending moment
Deflection
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
17
Contact:
Page:
4 of 5
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
26-Feb-15
Calculation factors:
Load type:
Design load
LC1: g
LC2: q
1.1
1.5
1.35
Load combinations:
ULS1 = 1.35*LC1+1*LC2
SLS1 = (LC1+LC2)/1.5
Maximum beam allowable deflection:
200
150
1.5
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
18
Contact:
Page:
5 of 5
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
26-Feb-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
19
Contact:
Page:
1 of 5
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
26-Feb-15
Beam MC-3D-41 OK
Selected beam
A
Iy
Iz
[m]
[cm]
[cm4]
[cm4]
[kN/m]
0.55
1.905
4.96
5.42
190,000,000.000
Channel
Length
MC-3D-41
Rotation
Supports
Support
No.
Span
A [m]
L [m]
0.05
0.45
0.50
0.05
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
20
Contact:
Page:
2 of 5
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
26-Feb-15
(Design load)
Loads
Single loads
Position
No.
Forces [kN]
[m]
0.18
0.0000
4.9000
0.37
0.0000
4.9000
Calculation summary
Beam MC-3D-41 OK
Deflection utilization [%]
48.40
99.21
Detailed results
(Design load)
Support
Length
Bending moment
Bending stress
Deflection
position
[m]
[kN]
[kNm]
[kN/m]
[mm]
[m]
Z
0.05
0.05
4.9050
4.9050
0.05
Mz
-0.4
0.6400
285,660.000
1.1
-0.4
0.0000
0.45
0.50
My
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
21
Contact:
Page:
3 of 5
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
26-Feb-15
Diagrams / Charts
Planning view
Bending moment
Deflection
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
22
Contact:
Page:
4 of 5
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
26-Feb-15
Calculation factors:
Load type:
Design load
LC1: g
LC2: q
1.1
1.5
1.35
Load combinations:
ULS1 = 1.35*LC1+1*LC2
SLS1 = (LC1+LC2)/1.5
Maximum beam allowable deflection:
200
150
1.5
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
23
Contact:
Page:
5 of 5
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
26-Feb-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
24
Contact:
Page:
1 of 5
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
26-Feb-15
Beam MQ-52 OK
Selected beam
A
Rotation
Iy
Iz
Channel
Length
[m]
[cm]
[cm4]
[cm4]
[kN/m]
MQ-52
0.65
3.521
11.4066
10.7943
210,000,000.000
Supports
Support
No.
Span
A [m]
L [m]
0.05
0.55
0.60
0.05
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
25
Contact:
Page:
2 of 5
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
26-Feb-15
(Design load)
Loads
Single loads
Position
No.
Forces [kN]
[m]
0.22
0.0000
5.7750
0.44
0.0000
5.7750
Calculation summary
Beam MQ-52 OK
Deflection utilization [%]
33.52
89.39
Detailed results
(Design load)
Support
Length
Bending moment
Bending stress
Deflection
position
[m]
[kN]
[kNm]
[kN/m]
[mm]
[m]
Z
0.05
0.05
5.6820
5.8920
0.05
Mz
-0.3
0.9700
226,780.000
0.9
-0.3
0.0000
0.55
0.60
My
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
26
Contact:
Page:
3 of 5
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
26-Feb-15
Diagrams / Charts
Planning view
Bending moment
Deflection
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
27
Contact:
Page:
4 of 5
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
26-Feb-15
Calculation factors:
Load type:
Design load
LC1: g
LC2: q
1.1
1.5
1.35
Load combinations:
ULS1 = 1.35*LC1+1*LC2
SLS1 = (LC1+LC2)/1.5
Maximum beam allowable deflection:
200
150
1.5
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
28
Contact:
Page:
5 of 5
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
26-Feb-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
29
Contact:
Page:
1 of 5
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
26-Feb-15
Beam MI-90 OK
Selected beam
A
Iy
Iz
[m]
[cm]
[cm4]
[cm4]
[kN/m]
0.70
1,003
115
115
210,000,000.000
Channel
Length
MI-90
Rotation
Supports
Support
No.
Span
A [m]
L [m]
0.05
0.60
0.65
0.05
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
30
Contact:
Page:
2 of 5
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
26-Feb-15
(Design load)
Loads
Single loads
Position
No.
Forces [kN]
[m]
0.23
0.0000
14.0500
0.45
0.0000
14.0500
Calculation summary
Beam MI-90 OK
Deflection utilization [%]
11.27
51.00
Detailed results
(Design load)
Support
Length
Bending moment
Bending stress
Deflection
position
[m]
[kN]
[kNm]
[kN/m]
[mm]
[m]
Z
0.05
14.5550
0.05
13.6200
0.05
Mz
-0.1
2.7200
-106,120.000
0.3
-0.1
0.0000
0.60
0.65
My
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
31
Contact:
Page:
3 of 5
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
26-Feb-15
Diagrams / Charts
Planning view
Bending moment
Deflection
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
32
Contact:
Page:
4 of 5
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
26-Feb-15
Calculation factors:
Load type:
Design load
LC1: g
LC2: q
1.1
1.5
1.35
Load combinations:
ULS1 = 1.35*LC1+1*LC2
SLS1 = (LC1+LC2)/1.5
Maximum beam allowable deflection:
200
150
1.5
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
33
Contact:
Page:
5 of 5
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
26-Feb-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
34
Contact:
Page:
1 of 5
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
26-Feb-15
Beam MI-90 OK
Selected beam
A
Iy
Iz
[m]
[cm]
[cm4]
[cm4]
[kN/m]
0.80
1,003
115
115
210,000,000.000
Channel
Length
MI-90
Rotation
Supports
Support
No.
Span
A [m]
L [m]
0.05
0.70
0.75
0.05
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
35
Contact:
Page:
2 of 5
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
26-Feb-15
(Design load)
Loads
Single loads
Position
No.
Forces [kN]
[m]
0.27
0.0000
18.8000
0.54
0.0000
18.8000
Calculation summary
Beam MI-90 OK
Deflection utilization [%]
19.27
76.16
Detailed results
(Design load)
Support
Length
Bending moment
Bending stress
Deflection
position
[m]
[kN]
[kNm]
[kN/m]
[mm]
[m]
Z
0.05
18.5720
0.05
19.1130
0.05
Mz
-0.1
4.0800
-159,180.000
0.7
-0.1
0.0000
0.70
0.75
My
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
36
Contact:
Page:
3 of 5
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
26-Feb-15
Diagrams / Charts
Planning view
Bending moment
Deflection
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
37
Contact:
Page:
4 of 5
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
26-Feb-15
Calculation factors:
Load type:
Design load
LC1: g
LC2: q
1.1
1.5
1.35
Load combinations:
ULS1 = 1.35*LC1+1*LC2
SLS1 = (LC1+LC2)/1.5
Maximum beam allowable deflection:
200
150
1.5
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
38
Contact:
Page:
5 of 5
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
26-Feb-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
39
Contact:
Page:
1 of 5
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
10-Mar-15
Beam MI-120 OK
Selected beam
Channel
MI-120
Length
Rotation
Iy
Iz
[m]
[cm]
[cm]
[cm]
[kN/m]
1.10
1,376
266
174
210,000,000.000
Supports
Support
Span
No.
A [m]
L [m]
0.05
1.00
1.05
0.05
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
40
Contact:
Page:
2 of 5
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
10-Mar-15
(Design load)
Loads
Single loads
Position
No.
Forces [kN]
[m]
0.35
0.0000
23.3250
0.75
0.0000
23.3250
Calculation summary
Beam MI-120 OK
Deflection utilization [%]
20.05
75.05
Detailed results
(Design load)
Support
Length
Bending moment
Bending stress
Deflection
position
[m]
[kN]
[kNm]
[kN/m]
[mm]
[m]
Z
0.05
23.4050
0.05
23.4050
0.05
Mz
-0.1
7.0200
-158,640.000
1.0
-0.1
0.0000
1.00
1.05
My
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
41
Contact:
Page:
3 of 5
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
10-Mar-15
Diagrams / Charts
Planning view
Bending moment
Deflection
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
42
Contact:
Page:
4 of 5
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
10-Mar-15
Calculation factors:
Load type:
Design load
LC1: g
LC2: q
1.1
1.5
1.35
Load combinations:
ULS1 = 1.35*LC1+1*LC2
SLS1 = (LC1+LC2)/1.5
Maximum beam allowable deflection:
200
150
1.5
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
43
Contact:
Page:
5 of 5
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
10-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
44
Seismic support
(Suspension 1.0m)
www.hilti.sa
sa.tso@hilti.com
IS-HN-D1278-2015
45
Contact:
Page:
1 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
46
Contact:
Page:
2 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Calculation factors:
Load type:
Seismic
LC1: g
LC2: q
LC3: Ex
Earthquake in X-direction
LC4: Ey
Earthquake in Y-direction
1.1
1.5
1.35
Load combinations:
ULS1 = 1.35*LC1+1.5*LC2
SLS1 = 1*LC1+1*LC2
ULS2 = 1*LC1+1*LC2+1*LC4
ULS3 = 1*LC1+1*LC2-1*LC4
ULS4 = 1*LC1+1*LC2+0.3*LC4
ULS5 = 1*LC1+1*LC2-0.3*LC4
Maximum beam allowable deflection:
200
150
1.5
Local
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
47
Contact:
Page:
3 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Parts List:
Channels
Description
Item
Pos
Qty
2063297
0.7
0.41
2063723
4.4
0.93
Item
Weight [kg]
Node No.
2063770
0.6
2,3
Beam No.
Structure connections
Pos
Qty
Description
Angle MC-A-90 OC-A
Fixations
Description
Item
Pos
Qty
2063241
2018429
Fixation text
Accessories
Description
Item
Pos
Qty
369685
0.0
0.00
2063742
0.1
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
48
Contact:
Page:
4 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Static model:
Node
Hinged axis
Connection
No.
0.0000
0.0000
0.0000
0.0000
0.0000
0.9200
Y,Z
MC-A-90 OC-A
0.4500
0.0000
0.9200
Y,Z
MC-A-90 OC-A
0.4500
0.0000
0.0000
Building material
MC-B-3D-41/1000 OC-A
MC-B-3D-41/1000 OC-A
Concrete
Concrete
Beams
Beam
Channel
No.
Length
Rotation
Iy
Iz
[m]
[]
[cm]
[cm]
[cm]
[kN/m]
MC-B-3D-41/1000
0.92
90
1.905
4.96
5.42
190,000,000.
MC-3D-41 OC-A
0.45
180
1.905
4.96
5.42
190,000,000.
MC-B-3D-41/1000
0.92
90
1.905
4.96
5.42
190,000,000.
Forces [kN]
Moments [kNm]
Forces [kN]
No.
No.
[m]
Ex
Ey
0.15
0.0000
0.0000
0.8750
0.0000
0.0000
0.0000
0.0000
0.1000
0.30
0.0000
0.0000
0.8750
0.0000
0.0000
0.0000
0.0000
0.1000
Load description
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
49
Contact:
Page:
5 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
No.
Date:
Type
Custom load
Custom load
Description
Size [mm]
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Span [m]
01-Mar-15
50
Contact:
Page:
6 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Calculation summary
1 Beams
(1) Connections
[1] Supports
Designation
Torsion
Stress
Torsion
[%]
[]
[%]
MC-B-3D-
2.24
0.0
0.00
MC-3D-41 OC-A
28.07
0.0
0.00
MC-B-3D-
2.24
0.0
0.00
(Design load)
Beam No.
Designation
Forces[kN]
Moments[kNm]
Utilization[%]
MC-B-3D-
1.3350
0.0000
0.0000
0.0000
0.0000
0.0000
8.00
MC-A-90 OC-A
0.0000
0.0000
-1.3200
0.0000
0.0000
0.0000
63.00
MC-A-90 OC-A
0.0000
0.0000
-1.3200
0.0000
0.0000
0.0000
63.00
MC-B-3D-
1.3350
0.0000
0.0000
0.0000
0.0000
0.0000
8.00
Support No.
(Design load)
Designation
Forces[kN]
Moments[kNm]
MC-B-3D-
0.0000
0.0000
1.3350
0.0000
0.0000
0.0000
MC-B-3D-
0.0000
0.0000
1.3350
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
51
Contact:
Page:
7 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Designation
Torsion
Stress
Torsion
[%]
[]
[%]
MC-B-3D-
14.04
0.0
0.00
MC-3D-41 OC-A
19.36
0.0
0.00
MC-B-3D-
14.04
0.0
0.00
(Design load)
Beam No.
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MC-B-3D-
0.8920
0.0000
0.1000
0.0000
-0.0920
0.0000
21.00
MC-A-90 OC-A
0.0000
-0.1000
-0.8800
0.0000
0.0000
0.0000
54.00
MC-A-90 OC-A
0.0000
-0.1000
-0.8800
0.0000
0.0000
0.0000
54.00
MC-B-3D-
0.8920
0.0000
0.1000
0.0000
-0.0920
0.0000
21.00
(Design load)
Support No.
Forces[kN]
Designation
Moments[kNm]
MC-B-3D-
0.0000
0.1000
0.8920
-0.0920
0.0000
0.0000
MC-B-3D-
0.0000
0.1000
0.8920
-0.0920
0.0000
0.0000
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MC-B-3D-
13.10
0.0
0.00
MC-3D-41 OC-A
19.36
0.0
0.00
MC-B-3D-
13.10
0.0
0.00
(Design load)
Node No.
Beam No.
MC-B-3D-
MC-A-90 OC-A
Designation
Forces[kN]
X
Moments[kNm]
X
0.8920
0.0000
-0.1000
0.0000
0.0920
0.0000
21.00
0.0000
0.1000
-0.8800
0.0000
0.0000
0.0000
54.00
MC-A-90 OC-A
0.0000
0.1000
-0.8800
0.0000
0.0000
0.0000
54.00
MC-B-3D-
0.8920
0.0000
-0.1000
0.0000
0.0920
0.0000
21.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Utilization[%]
52
Contact:
Page:
8 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Support No.
01-Mar-15
Forces[kN]
Designation
Moments[kNm]
MC-B-3D-
0.0000
-0.1000
0.8920
0.0920
0.0000
0.0000
MC-B-3D-
0.0000
-0.1000
0.8920
0.0920
0.0000
0.0000
Designation
Torsion
Stress
Torsion
[%]
[]
[%]
MC-B-3D-
5.68
0.0
0.00
MC-3D-41 OC-A
18.26
0.0
0.00
MC-B-3D-
5.68
0.0
0.00
(Design load)
Beam No.
2
3
4
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MC-B-3D-
0.8920
0.0000
0.0300
0.0000
-0.0280
0.0000
9.00
MC-A-90 OC-A
0.0000
-0.0300
-0.8800
0.0000
0.0000
0.0000
45.00
MC-A-90 OC-A
0.0000
-0.0300
-0.8800
0.0000
0.0000
0.0000
45.00
MC-B-3D-
0.8920
0.0000
0.0300
0.0000
-0.0280
0.0000
9.00
(Design load)
Support No.
Forces[kN]
Designation
Moments[kNm]
MC-B-3D-
0.0000
0.0300
0.8920
-0.0280
0.0000
0.0000
MC-B-3D-
0.0000
0.0300
0.8920
-0.0280
0.0000
0.0000
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MC-B-3D-
5.37
0.0
0.00
MC-3D-41 OC-A
18.26
0.0
0.00
MC-B-3D-
5.37
0.0
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
53
Contact:
Page:
9 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
(Design load)
Beam No.
MC-B-3D-
MC-A-90 OC-A
Designation
Forces[kN]
Z
0.8920
0.0000
-0.0300
0.0000
0.0280
0.0000
9.00
0.0000
0.0300
-0.8800
0.0000
0.0000
0.0000
45.00
MC-A-90 OC-A
0.0000
0.0300
-0.8800
0.0000
0.0000
0.0000
45.00
MC-B-3D-
0.8920
0.0000
-0.0300
0.0000
0.0280
0.0000
9.00
Node No.
Support No.
Utilization[%]
Moments[kNm]
(Design load)
Designation
Forces[kN]
Moments[kNm]
MC-B-3D-
0.0000
-0.0300
0.8920
0.0280
0.0000
0.0000
MC-B-3D-
0.0000
-0.0300
0.8920
0.0280
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
54
Contact:
Page:
10 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Stress:
Beam No. 1: MC-B-3D-41/1000 OC-A
Position
[m]
0.00
0.00
0.00
Actual
[kN/m]
44,980.000
920.000
44,980.000
Limit
[kN/m]
320,450.000
185,010.000
320,450.000
Utilization
[%]
14.03
0.50
14.04
[m]
0.15
0.00
0.15
Actual
[kN/m]
-89,270.000
12,310.000
89,940.000
Limit
[kN/m]
320,450.000
185,010.000
320,450.000
Utilization
[%]
27.86
6.65
28.07
0.00
0.00
0.00
[m]
Actual
[kN/m]
44,980.000
920.000
44,980.000
Limit
[kN/m]
320,450.000
185,010.000
320,450.000
Utilization
[%]
14.03
0.50
14.04
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
55
Contact:
Page:
11 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Displacement SLS1:
Beam No.
Value
Position [m]
Max. Displacement
0.92
Displacement [mm]
Utilization
u-X
u-Y
u-Z
[%]
0.0
0.0
0.0
0.50
Max. Displacement
0.22
0.0
0.0
0.3
14.39
Max. Displacement
0.92
0.0
0.0
0.0
0.50
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
56
Contact:
Page:
12 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
(Design load)
Support load:
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
0.0000
1.3350
0.0000
0.0000
0.0000
0.0000
0.0000
1.3350
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
0.1000
0.8920
-0.0920
0.0000
0.0000
0.0000
0.1000
0.8920
-0.0920
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
-0.1000
0.8920
0.0920
0.0000
0.0000
0.0000
-0.1000
0.8920
0.0920
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
0.0300
0.8920
-0.0280
0.0000
0.0000
0.0000
0.0300
0.8920
-0.0280
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
57
Contact:
Page:
13 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
-0.0300
0.8920
0.0280
0.0000
0.0000
0.0000
-0.0300
0.8920
0.0280
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
58
Contact:
Page:
14 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Application conditions
Please note:
Make sure that for M10 screws a torque moment
of 40Nm is applied.
MC-A-90 OC-A
Node: 3, 2
Pos: 3
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
59
Contact:
Page:
15 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
60
Contact:
Page:
1 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
61
Contact:
Page:
2 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Calculation factors:
Load type:
Seismic
LC1: g
LC2: q
LC3: Ex
Earthquake in X-direction
LC4: Ey
Earthquake in Y-direction
1.1
1.5
1.35
Load combinations:
ULS1 = 1.35*LC1+1.5*LC2
SLS1 = 1*LC1+1*LC2
ULS2 = 1*LC1+1*LC2+1*LC3
ULS3 = 1*LC1+1*LC2-1*LC3
ULS4 = 1*LC1+1*LC2+0.3*LC3
ULS5 = 1*LC1+1*LC2-0.3*LC3
Maximum beam allowable deflection:
200
150
1.5
Local
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
62
Contact:
Page:
3 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Parts List:
Channels
Description
Item
Pos
Qty
2063297
0.7
0.41
2063723
4.4
0.93
Item
Weight [kg]
Node No.
2063770
0.6
2,3
Beam No.
Structure connections
Pos
Qty
Description
Angle MC-A-90 OC-A
Fixations
Description
Item
Pos
Qty
2063241
2018429
Fixation text
Accessories
Description
Item
Pos
Qty
369685
0.0
0.00
2063742
0.1
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
63
Contact:
Page:
4 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Static model:
Node
Hinged axis
Connection
0.0000
X,Y
MC-B-3D-41/1000 OC-A
0.0000
0.9200
Y,Z
MC-A-90 OC-A
0.0000
0.9200
Y,Z
MC-A-90 OC-A
0.0000
0.0000
X,Y
MC-B-3D-41/1000 OC-A
No.
0.0000
0.0000
0.0000
0.4500
0.4500
Building material
Concrete
Concrete
Beams
Beam
Channel
No.
Length
Rotation
Iy
Iz
[m]
[]
[cm]
[cm]
[cm]
[kN/m]
MC-B-3D-41/1000
0.92
90
1.905
4.96
5.42
190,000,000.
MC-3D-41 OC-A
0.45
180
1.905
4.96
5.42
190,000,000.
MC-B-3D-41/1000
0.92
90
1.905
4.96
5.42
190,000,000.
Forces [kN]
Moments [kNm]
Forces [kN]
No.
No.
[m]
Ex
Ey
0.15
0.0000
0.0000
0.8750
0.0000
0.0000
0.0000
0.1000
0.0000
0.30
0.0000
0.0000
0.8750
0.0000
0.0000
0.0000
0.1000
0.0000
Load description
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
64
Contact:
Page:
5 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
No.
Date:
Type
Custom load
Custom load
Description
Size [mm]
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Span [m]
01-Mar-15
65
Contact:
Page:
6 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Calculation summary
1 Beams
(1) Connections
[1] Supports
Designation
Torsion
Stress
Torsion
[%]
[]
[%]
MC-B-3D-
2.24
0.0
0.00
MC-3D-41 OC-A
28.07
0.0
0.00
MC-B-3D-
2.24
0.0
0.00
(Design load)
Beam No.
Designation
Forces[kN]
Moments[kNm]
Utilization[%]
MC-B-3D-
1.3350
0.0000
0.0000
0.0000
0.0000
0.0000
8.00
MC-A-90 OC-A
0.0000
0.0000
-1.3200
0.0000
0.0000
0.0000
63.00
MC-A-90 OC-A
0.0000
0.0000
-1.3200
0.0000
0.0000
0.0000
63.00
MC-B-3D-
1.3350
0.0000
0.0000
0.0000
0.0000
0.0000
8.00
Support No.
(Design load)
Designation
Forces[kN]
Moments[kNm]
MC-B-3D-
0.0000
0.0000
1.3350
0.0000
0.0000
0.0000
MC-B-3D-
0.0000
0.0000
1.3350
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
66
Contact:
Page:
7 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Designation
Torsion
Stress
Torsion
[%]
[]
[%]
MC-B-3D-
8.01
0.0
0.00
MC-3D-41 OC-A
21.13
0.0
0.00
MC-B-3D-
7.33
0.0
0.00
(Design load)
Beam No.
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MC-B-3D-
1.0960
0.1000
0.0000
0.0000
0.0000
0.0460
21.00
MC-A-90 OC-A
0.1000
0.0000
-1.0800
0.0000
0.0500
0.0000
56.00
MC-A-90 OC-A
-0.1000
0.0000
-0.6700
0.0000
0.0500
0.0000
37.00
MC-B-3D-
0.6870
0.1000
0.0000
0.0000
0.0000
0.0460
18.00
(Design load)
Support No.
Forces[kN]
Designation
Moments[kNm]
MC-B-3D-
0.1000
0.0000
1.0960
0.0000
0.0460
0.0000
MC-B-3D-
0.1000
0.0000
0.6870
0.0000
0.0460
0.0000
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MC-B-3D-
7.33
0.0
0.00
MC-3D-41 OC-A
21.13
0.0
0.00
MC-B-3D-
8.01
0.0
0.00
Beam No.
(Design load)
Designation
Forces[kN]
X
Moments[kNm]
Z
Utilization[%]
MC-B-3D-
0.6870
-0.1000
0.0000
0.0000
0.0000
-0.0460
18.00
MC-A-90 OC-A
-0.1000
0.0000
-0.6700
0.0000
-0.0500
0.0000
37.00
MC-A-90 OC-A
0.1000
0.0000
-1.0800
0.0000
-0.0500
0.0000
56.00
MC-B-3D-
1.0960
-0.1000
0.0000
0.0000
0.0000
-0.0460
21.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
67
Contact:
Page:
8 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Support No.
01-Mar-15
Forces[kN]
Designation
Moments[kNm]
MC-B-3D-
-0.1000
0.0000
0.6870
0.0000
-0.0460
0.0000
MC-B-3D-
-0.1000
0.0000
1.0960
0.0000
-0.0460
0.0000
Designation
Torsion
Stress
Torsion
[%]
[]
[%]
MC-B-3D-
2.83
0.0
0.00
MC-3D-41 OC-A
19.67
0.0
0.00
MC-B-3D-
2.63
0.0
0.00
(Design load)
Beam No.
Forces[kN]
Designation
MC-B-3D-
Moments[kNm]
Utilization[%]
0.9530
0.0300
0.0000
0.0000
0.0000
0.0140
10.00
MC-A-90 OC-A
0.0300
0.0000
-0.9400
0.0000
0.0100
0.0000
46.00
MC-A-90 OC-A
-0.0300
0.0000
-0.8200
0.0000
0.0100
0.0000
40.00
MC-B-3D-
0.8300
0.0300
0.0000
0.0000
0.0000
0.0140
9.00
(Design load)
Support No.
Forces[kN]
Designation
Moments[kNm]
MC-B-3D-
0.0300
0.0000
0.9530
0.0000
0.0140
0.0000
MC-B-3D-
0.0300
0.0000
0.8300
0.0000
0.0140
0.0000
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MC-B-3D-
2.63
0.0
0.00
MC-3D-41 OC-A
19.67
0.0
0.00
MC-B-3D-
2.83
0.0
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
68
Contact:
Page:
9 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Beam No.
01-Mar-15
Forces[kN]
Designation
Moments[kNm]
Z
Utilization[%]
MC-B-3D-
0.8300
-0.0300
0.0000
0.0000
0.0000
-0.0140
9.00
MC-A-90 OC-A
-0.0300
0.0000
-0.8200
0.0000
-0.0100
0.0000
40.00
MC-A-90 OC-A
0.0300
0.0000
-0.9400
0.0000
-0.0100
0.0000
46.00
MC-B-3D-
0.9530
-0.0300
0.0000
0.0000
0.0000
-0.0140
10.00
Support No.
(Design load)
Designation
Forces[kN]
Moments[kNm]
MC-B-3D-
-0.0300
0.0000
0.8300
0.0000
-0.0140
0.0000
MC-B-3D-
-0.0300
0.0000
0.9530
0.0000
-0.0140
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
69
Contact:
Page:
10 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Stress:
Beam No. 1: MC-B-3D-41/1000 OC-A
Position
[m]
0.00
0.00
0.00
Actual
[kN/m]
25,560.000
-1,790.000
25,680.000
Limit
[kN/m]
320,450.000
185,010.000
320,450.000
Utilization
[%]
7.98
0.97
8.01
[m]
0.15
0.00
0.15
Actual
[kN/m]
-89,270.000
12,310.000
89,940.000
Limit
[kN/m]
320,450.000
185,010.000
320,450.000
Utilization
[%]
27.86
6.65
28.07
0.00
0.00
0.00
[m]
Actual
[kN/m]
25,560.000
-1,790.000
25,680.000
Limit
[kN/m]
320,450.000
185,010.000
320,450.000
Utilization
[%]
7.98
0.97
8.01
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
70
Contact:
Page:
11 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Displacement SLS1:
Beam No.
Value
Position [m]
Max. Displacement
0.92
Displacement [mm]
Utilization
u-X
u-Y
u-Z
[%]
0.0
0.0
0.0
0.50
Max. Displacement
0.22
0.0
0.0
0.3
14.39
Max. Displacement
0.92
0.0
0.0
0.0
0.50
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
71
Contact:
Page:
12 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
(Design load)
Support load:
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
0.0000
1.3350
0.0000
0.0000
0.0000
0.0000
0.0000
1.3350
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.1000
0.0000
1.0960
0.0000
0.0460
0.0000
0.1000
0.0000
0.6870
0.0000
0.0460
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
-0.1000
0.0000
0.6870
0.0000
-0.0460
0.0000
-0.1000
0.0000
1.0960
0.0000
-0.0460
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0300
0.0000
0.9530
0.0000
0.0140
0.0000
0.0300
0.0000
0.8300
0.0000
0.0140
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
72
Contact:
Page:
13 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
-0.0300
0.0000
0.8300
0.0000
-0.0140
0.0000
-0.0300
0.0000
0.9530
0.0000
-0.0140
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
73
Contact:
Page:
14 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Application conditions
Please note:
Make sure that for M10 screws a torque moment
of 40Nm is applied.
MC-A-90 OC-A
Node: 3, 2
Pos: 3
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
74
Contact:
Page:
15 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
75
Contact:
Page:
1 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
76
Contact:
Page:
2 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Calculation factors:
Load type:
Seismic
LC1: g
LC2: q
LC3: Ex
Earthquake in X-direction
LC4: Ey
Earthquake in Y-direction
1.1
1.5
1.35
Load combinations:
ULS1 = 1.35*LC1+1.5*LC2
SLS1 = 1*LC1+1*LC2
ULS2 = 1*LC1+1*LC2+1*LC4
ULS3 = 1*LC1+1*LC2-1*LC4
ULS4 = 1*LC1+1*LC2+0.3*LC4
ULS5 = 1*LC1+1*LC2-0.3*LC4
Maximum beam allowable deflection:
200
150
1.5
Local
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
77
Contact:
Page:
3 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Parts List:
Channels
Description
Item
Pos
Qty
369604
369598
Item
Weight [kg]
Node No.
369585
1.6
Beam No.
0.59
4,5
8.4
1.02
1,3
1.3
0.47
Connections
Description
Pos
Qty
369660
0.8
6,8
369649
0.7
5,7
369652
3.8
1,4
369658
0.5
2,3
Fixations
Description
Item
Pos
Qty
24
369623
371587
Fixation text
Accessories
Pos
Qty
10
Description
Channel end cap MQZ-E41
Item
369685
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
0.0
0.00
78
Contact:
Page:
4 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Static model:
Node
Hinged axis
Connection
No.
0.0000
0.0000
0.0000
0.0000
0.0000
1.0000
Y,Z
MQW-4
0.5500
0.0000
1.0000
Y,Z
MQW-4
0.5500
0.0000
0.0000
0.0000
-0.5000
0.0000
X,Y,Z
0.0000
0.0000
0.5000
X,Z
0.5500
-0.5000
0.0000
X,Y,Z
0.5500
0.0000
0.5000
X,Z
MQP-82
Building material
Concrete
MQP-82
Concrete
MQP-45
Concrete
MQW-8/45 r
MQP-45
Concrete
MQW-8/45 r
Beams
Beam
Channel
No.
Length
Rotation
Iy
Iz
[m]
[]
[cm]
[cm]
[cm]
[kN/m]
MQ-41 D 6m
1.00
180
4.903
30.6875
14.6682
210,000,000.
MQ-52 6m
0.55
180
3.521
11.4066
10.7943
210,000,000.
MQ-41 D 6m
1.00
4.903
30.6875
14.6682
210,000,000.
MQ-21 6m
0.71
1.653
0.9174
4.3914
210,000,000.
MQ-21 6m
0.71
1.653
0.9174
4.3914
210,000,000.
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
79
Contact:
Page:
5 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Point loads
No.
No.
1
2
Position
Forces [kN]
Moments [kNm]
Forces [kN]
[m]
Ex
Ey
0.19
0.0000
0.0000
2.2875
0.0000
0.0000
0.0000
0.0000
0.2640
0.37
0.0000
0.0000
2.2875
0.0000
0.0000
0.0000
0.0000
0.2640
Load description
No.
Type
Custom load
Custom load
Description
Size [mm]
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Span [m]
80
Contact:
Page:
6 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Calculation summary
1 Beams
(1) Connections
[1] Supports
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-41 D 6m
3.47
0.0
0.00
MQ-52 6m
58.04
0.0
0.00
MQ-41 D 6m
3.48
0.0
0.00
MQ-21 6m
0.05
0.0
0.00
MQ-21 6m
0.05
0.0
0.00
Beam No.
(Design load)
Designation
Forces[kN]
X
Moments[kNm]
Z
Utilization[%]
MQP-82
3.4760
0.0120
0.0000
0.0000
0.0000
0.0060
23.00
MQW-4
0.0000
0.0000
-3.4300
0.0000
0.0000
0.0000
66.00
MQW-4
0.0000
0.0000
-3.4500
0.0000
0.0000
0.0000
66.00
MQP-82
3.5010
-0.0120
0.0000
0.0000
0.0000
-0.0060
23.00
MQP-45
0.0200
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQP-45
0.0200
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
81
Contact:
Page:
7 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Support No.
5
7
01-Mar-15
Forces[kN]
Designation
Moments[kNm]
MQP-82
0.0000
-0.0120
3.4760
0.0060
0.0000
0.0000
MQP-82
0.0000
-0.0120
3.5010
0.0060
0.0000
0.0000
MQP-45
0.0000
0.0120
0.0180
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0120
0.0180
0.0000
0.0000
0.0000
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-41 D 6m
9.44
0.0
0.00
MQ-52 6m
41.82
0.0
0.00
MQ-41 D 6m
9.44
0.0
0.00
MQ-21 6m
2.04
0.0
0.00
MQ-21 6m
2.07
0.0
0.00
(Design load)
Beam No.
2
3
Designation
Forces[kN]
Moments[kNm]
Utilization[%]
MQP-82
1.7020
0.3660
0.0000
0.0000
0.0000
0.0510
48.00
MQW-4
0.0000
0.2600
-2.2900
0.0000
0.0000
0.0000
85.00
MQW-4
0.0000
0.2600
-2.3000
0.0000
0.0000
0.0000
86.00
MQP-82
1.7140
-0.3680
0.0000
0.0000
0.0000
-0.0520
49.00
MQP-45
0.8900
0.0000
0.0000
0.0000
0.0000
0.0000
13.00
MQW-8/45 r
0.8900
0.0000
0.0000
0.0000
0.0000
0.0000
21.00
MQP-45
0.9000
0.0000
0.0000
0.0000
0.0000
0.0000
13.00
MQW-8/45 r
0.8900
0.0000
0.0000
0.0000
0.0000
0.0000
21.00
Support No.
5
7
(Design load)
Designation
Forces[kN]
Moments[kNm]
MQP-82
0.0000
-0.3660
1.7020
0.0510
0.0000
0.0000
MQP-82
0.0000
-0.3680
1.7140
0.0520
0.0000
0.0000
MQP-45
0.0000
0.6290
0.6330
0.0000
0.0000
0.0000
MQP-45
0.0000
0.6330
0.6380
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
82
Contact:
Page:
8 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Designation
Torsion
Stress
Torsion
[%]
[]
[%]
MQ-41 D 6m
9.99
0.0
0.00
MQ-52 6m
41.82
0.0
0.00
MQ-41 D 6m
10.01
0.0
0.00
MQ-21 6m
2.00
0.0
0.00
MQ-21 6m
2.02
0.0
0.00
(Design load)
Beam No.
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MQP-82
2.9430
-0.3500
0.0000
0.0000
0.0000
-0.0440
42.00
MQW-4
0.0000
-0.2600
-2.2900
0.0000
0.0000
0.0000
85.00
MQW-4
0.0000
-0.2600
-2.3000
0.0000
0.0000
0.0000
86.00
MQP-82
2.9650
0.3530
0.0000
0.0000
0.0000
0.0440
42.00
MQP-45
-0.8600
0.0000
0.0000
0.0000
0.0000
0.0000
9.00
MQW-8/45 r
-0.8700
0.0000
0.0000
0.0000
0.0000
0.0000
21.00
MQP-45
-0.8700
0.0000
0.0000
0.0000
0.0000
0.0000
9.00
MQW-8/45 r
-0.8800
0.0000
0.0000
0.0000
0.0000
0.0000
21.00
(Design load)
Forces[kN]
Moments[kNm]
Node No.
Support No.
MQP-82
0.0000
0.3500
2.9430
-0.0440
0.0000
0.0000
MQP-82
0.0000
0.3530
2.9650
-0.0440
0.0000
0.0000
MQP-45
0.0000
-0.6130
-0.6090
0.0000
0.0000
0.0000
MQP-45
0.0000
-0.6180
-0.6130
0.0000
0.0000
0.0000
Designation
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-41 D 6m
4.23
0.0
0.00
MQ-52 6m
39.32
0.0
0.00
MQ-41 D 6m
4.23
0.0
0.00
MQ-21 6m
0.64
0.0
0.00
MQ-21 6m
0.64
0.0
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
83
Contact:
Page:
9 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Beam No.
01-Mar-15
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MQP-82
2.1360
0.1150
0.0000
0.0000
0.0000
0.0180
17.00
MQW-4
0.0000
0.0800
-2.2900
0.0000
0.0000
0.0000
57.00
MQW-4
0.0000
0.0800
-2.3000
0.0000
0.0000
0.0000
57.00
MQP-82
2.1520
-0.1160
0.0000
0.0000
0.0000
-0.0180
17.00
MQP-45
0.2800
0.0000
0.0000
0.0000
0.0000
0.0000
4.00
MQW-8/45 r
0.2700
0.0000
0.0000
0.0000
0.0000
0.0000
6.00
MQP-45
0.2800
0.0000
0.0000
0.0000
0.0000
0.0000
4.00
MQW-8/45 r
0.2700
0.0000
0.0000
0.0000
0.0000
0.0000
6.00
(Design load)
Support No.
4
5
7
Forces[kN]
Designation
Moments[kNm]
MQP-82
0.0000
-0.1150
2.1360
0.0180
0.0000
0.0000
MQP-82
0.0000
-0.1160
2.1520
0.0180
0.0000
0.0000
MQP-45
0.0000
0.1940
0.1990
0.0000
0.0000
0.0000
MQP-45
0.0000
0.1950
0.2000
0.0000
0.0000
0.0000
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-41 D 6m
4.38
0.0
0.00
MQ-52 6m
39.32
0.0
0.00
MQ-41 D 6m
4.40
0.0
0.00
MQ-21 6m
0.60
0.0
0.00
MQ-21 6m
0.60
0.0
0.00
Beam No.
2
3
(Design load)
Designation
Forces[kN]
Moments[kNm]
Utilization[%]
MQP-82
2.5090
-0.1000
0.0000
0.0000
0.0000
-0.0100
18.00
MQW-4
0.0000
-0.0800
-2.2900
0.0000
0.0000
0.0000
57.00
MQW-4
0.0000
-0.0800
-2.3000
0.0000
0.0000
0.0000
57.00
MQP-82
2.5270
0.1000
0.0000
0.0000
0.0000
0.0100
18.00
MQP-45
-0.2500
0.0000
0.0000
0.0000
0.0000
0.0000
3.00
MQW-8/45 r
-0.2600
0.0000
0.0000
0.0000
0.0000
0.0000
6.00
MQP-45
-0.2500
0.0000
0.0000
0.0000
0.0000
0.0000
3.00
MQW-8/45 r
-0.2600
0.0000
0.0000
0.0000
0.0000
0.0000
6.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
84
Contact:
Page:
10 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
Support No.
5
7
01-Mar-15
(Design load)
Designation
Forces[kN]
Moments[kNm]
MQP-82
0.0000
0.1000
2.5090
-0.0100
0.0000
0.0000
MQP-82
0.0000
0.1000
2.5270
-0.0100
0.0000
0.0000
MQP-45
0.0000
-0.1790
-0.1740
0.0000
0.0000
0.0000
MQP-45
0.0000
-0.1800
-0.1750
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
85
Contact:
Page:
11 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Stress:
Beam No. 1: MQ-41 D 6m
Position
[m]
0.50
0.00
0.50
Actual
[kN/m]
24,260.000
2,620.000
24,510.000
Limit
[kN/m]
245,450.000
141,710.000
245,450.000
Utilization
[%]
9.88
1.85
9.99
[m]
0.19
0.37
0.37
Actual
[kN/m]
-147,290.000
18,680.000
147,730.000
Limit
[kN/m]
254,550.000
146,960.000
254,550.000
Utilization
[%]
57.86
12.71
58.04
[m]
0.50
0.00
0.50
Actual
[kN/m]
24,320.000
-2,620.000
24,570.000
Limit
[kN/m]
245,450.000
141,710.000
245,450.000
Utilization
[%]
9.91
1.85
10.01
[m]
0.00
0.00
0.00
Actual
[kN/m]
5,380.000
0.000
5,380.000
Limit
[kN/m]
263,640.000
0.000
263,640.000
Utilization
[%]
2.04
0.00
2.04
[m]
0.00
0.00
0.00
Actual
[kN/m]
5,440.000
0.000
5,440.000
Limit
[kN/m]
263,640.000
0.000
263,640.000
Utilization
[%]
2.07
0.00
2.07
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
86
Contact:
Page:
12 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Displacement SLS1:
Beam No.
Value
Position [m]
Max. Displacement
1.00
Displacement [mm]
Utilization
u-X
u-Y
u-Z
[%]
0.0
0.0
0.0
0.63
Max. Displacement
0.28
0.0
0.0
0.6
21.54
Max. Displacement
1.00
0.0
0.0
0.0
0.63
Max. Displacement
0.42
0.0
0.0
0.0
0.49
Max. Displacement
0.42
0.0
0.0
0.0
0.49
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
87
Contact:
Page:
13 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
(Design load)
Support load:
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
-0.0120
3.4760
0.0060
0.0000
0.0000
0.0000
-0.0120
3.5010
0.0060
0.0000
0.0000
0.0000
0.0120
0.0180
0.0000
0.0000
0.0000
0.0000
0.0120
0.0180
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
-0.3660
1.7020
0.0510
0.0000
0.0000
0.0000
-0.3680
1.7140
0.0520
0.0000
0.0000
0.0000
0.6290
0.6330
0.0000
0.0000
0.0000
0.0000
0.6330
0.6380
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
0.3500
2.9430
-0.0440
0.0000
0.0000
0.0000
0.3530
2.9650
-0.0440
0.0000
0.0000
0.0000
-0.6130
-0.6090
0.0000
0.0000
0.0000
0.0000
-0.6180
-0.6130
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
88
Contact:
Page:
14 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
-0.1150
2.1360
0.0180
0.0000
0.0000
0.0000
-0.1160
2.1520
0.0180
0.0000
0.0000
0.0000
0.1940
0.1990
0.0000
0.0000
0.0000
0.0000
0.1950
0.2000
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
0.1000
2.5090
-0.0100
0.0000
0.0000
0.0000
0.1000
2.5270
-0.0100
0.0000
0.0000
0.0000
-0.1790
-0.1740
0.0000
0.0000
0.0000
0.0000
-0.1800
-0.1750
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
89
Contact:
Page:
15 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
90
Contact:
Page:
1 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
91
Contact:
Page:
2 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Calculation factors:
Load type:
Seismic
LC1: g
LC2: q
LC3: Ex
Earthquake in X-direction
LC4: Ey
Earthquake in Y-direction
1.1
1.5
1.35
Load combinations:
ULS1 = 1.35*LC1+1.5*LC2
SLS1 = 1*LC1+1*LC2
ULS2 = 1*LC1+1*LC2+1*LC3
ULS3 = 1*LC1+1*LC2-1*LC3
ULS4 = 1*LC1+1*LC2+0.3*LC3
ULS5 = 1*LC1+1*LC2-0.3*LC3
Maximum beam allowable deflection:
200
150
1.5
Local
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
92
Contact:
Page:
3 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Parts List:
Channels
Description
Item
Pos
Qty
369604
369598
Item
Weight [kg]
Node No.
369585
1.6
Beam No.
0.59
4,5
8.4
1.02
1,3
1.3
0.47
Connections
Description
Pos
Qty
369660
0.8
6,8
369649
0.7
5,7
369652
3.8
1,4
369658
0.5
2,3
Fixations
Description
Item
Pos
Qty
24
369623
371587
Fixation text
Accessories
Pos
Qty
10
Description
Channel end cap MQZ-E41
Item
369685
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
0.0
0.00
93
Contact:
Page:
4 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Static model:
Node
Hinged axis
Connection
No.
0.0000
0.0000
0.0000
0.0000
0.0000
1.0000
Y,Z
MQW-4
0.5500
0.0000
1.0000
Y,Z
MQW-4
0.5500
0.0000
0.0000
0.0000
-0.5000
0.0000
X,Y,Z
0.0000
0.0000
0.5000
X,Z
0.5500
-0.5000
0.0000
X,Y,Z
0.5500
0.0000
0.5000
X,Z
MQP-82
Building material
Concrete
MQP-82
Concrete
MQP-45
Concrete
MQW-8/45 r
MQP-45
Concrete
MQW-8/45 r
Beams
Beam
Channel
No.
Length
Rotation
Iy
Iz
[m]
[]
[cm]
[cm]
[cm]
[kN/m]
MQ-41 D 6m
1.00
180
4.903
30.6875
14.6682
210,000,000.
MQ-52 6m
0.55
180
3.521
11.4066
10.7943
210,000,000.
MQ-41 D 6m
1.00
4.903
30.6875
14.6682
210,000,000.
MQ-21 6m
0.71
1.653
0.9174
4.3914
210,000,000.
MQ-21 6m
0.71
1.653
0.9174
4.3914
210,000,000.
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
94
Contact:
Page:
5 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Point loads
No.
No.
1
2
Position
Forces [kN]
Moments [kNm]
Forces [kN]
[m]
Ex
Ey
0.19
0.0000
0.0000
2.2875
0.0000
0.0000
0.0000
0.2640
0.0000
0.37
0.0000
0.0000
2.2875
0.0000
0.0000
0.0000
0.2640
0.0000
Load description
No.
Type
Custom load
Custom load
Description
Size [mm]
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Span [m]
95
Contact:
Page:
6 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Calculation summary
1 Beams
(1) Connections
[1] Supports
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-41 D 6m
3.47
0.0
0.00
MQ-52 6m
58.04
0.0
0.00
MQ-41 D 6m
3.48
0.0
0.00
MQ-21 6m
0.05
0.0
0.00
MQ-21 6m
0.05
0.0
0.00
Beam No.
(Design load)
Designation
Forces[kN]
X
Moments[kNm]
Z
Utilization[%]
MQP-82
3.4760
0.0120
0.0000
0.0000
0.0000
0.0060
23.00
MQW-4
0.0000
0.0000
-3.4300
0.0000
0.0000
0.0000
66.00
MQW-4
0.0000
0.0000
-3.4500
0.0000
0.0000
0.0000
66.00
MQP-82
3.5010
-0.0120
0.0000
0.0000
0.0000
-0.0060
23.00
MQP-45
0.0200
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQP-45
0.0200
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
96
Contact:
Page:
7 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Support No.
5
7
01-Mar-15
Forces[kN]
Designation
Moments[kNm]
MQP-82
0.0000
-0.0120
3.4760
0.0060
0.0000
0.0000
MQP-82
0.0000
-0.0120
3.5010
0.0060
0.0000
0.0000
MQP-45
0.0000
0.0120
0.0180
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0120
0.0180
0.0000
0.0000
0.0000
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-41 D 6m
16.19
0.0
0.00
MQ-52 6m
38.98
0.0
0.00
MQ-41 D 6m
16.20
0.0
0.00
MQ-21 6m
0.02
0.0
0.00
MQ-21 6m
0.02
0.0
0.00
(Design load)
Beam No.
Forces[kN]
Designation
MQP-82
Moments[kNm]
Utilization[%]
2.3230
0.0080
0.2640
0.0000
-0.2640
0.0040
36.00
MQW-4
0.2600
0.0000
-2.2900
0.0000
0.0000
0.0000
49.00
MQW-4
-0.2600
0.0000
-2.3000
0.0000
0.0000
0.0000
48.00
MQP-82
2.3390
-0.0080
-0.2640
0.0000
0.2640
-0.0040
36.00
MQP-45
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQP-45
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
Support No.
5
7
(Design load)
Designation
Forces[kN]
Moments[kNm]
MQP-82
0.2640
-0.0080
2.3230
0.0040
0.2640
0.0000
MQP-82
0.2640
-0.0080
2.3390
0.0040
0.2640
0.0000
MQP-45
0.0000
0.0080
0.0120
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0080
0.0120
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
97
Contact:
Page:
8 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Designation
Torsion
Stress
Torsion
[%]
[]
[%]
MQ-41 D 6m
16.19
0.0
0.00
MQ-52 6m
38.98
0.0
0.00
MQ-41 D 6m
16.20
0.0
0.00
MQ-21 6m
0.02
0.0
0.00
MQ-21 6m
0.02
0.0
0.00
(Design load)
Beam No.
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MQP-82
2.3230
0.0080
-0.2640
0.0000
0.2640
0.0040
36.00
MQW-4
-0.2600
0.0000
-2.2900
0.0000
0.0000
0.0000
48.00
MQW-4
0.2600
0.0000
-2.3000
0.0000
0.0000
0.0000
49.00
MQP-82
2.3390
-0.0080
0.2640
0.0000
-0.2640
-0.0040
36.00
MQP-45
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQP-45
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
(Design load)
Forces[kN]
Moments[kNm]
Node No.
Support No.
MQP-82
-0.2640
-0.0080
2.3230
0.0040
-0.2640
0.0000
MQP-82
-0.2640
-0.0080
2.3390
0.0040
-0.2640
0.0000
MQP-45
0.0000
0.0080
0.0120
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0080
0.0120
0.0000
0.0000
0.0000
Designation
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-41 D 6m
6.31
0.0
0.00
MQ-52 6m
38.78
0.0
0.00
MQ-41 D 6m
6.33
0.0
0.00
MQ-21 6m
0.02
0.0
0.00
MQ-21 6m
0.02
0.0
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
98
Contact:
Page:
9 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Beam No.
01-Mar-15
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MQP-82
2.3230
0.0080
0.0790
0.0000
-0.0790
0.0040
22.00
MQW-4
0.0800
0.0000
-2.2900
0.0000
0.0000
0.0000
46.00
MQW-4
-0.0800
0.0000
-2.3000
0.0000
0.0000
0.0000
45.00
MQP-82
2.3390
-0.0080
-0.0790
0.0000
0.0790
-0.0040
22.00
MQP-45
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQP-45
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
(Design load)
Support No.
4
5
7
Forces[kN]
Designation
Moments[kNm]
MQP-82
0.0790
-0.0080
2.3230
0.0040
0.0790
0.0000
MQP-82
0.0790
-0.0080
2.3390
0.0040
0.0790
0.0000
MQP-45
0.0000
0.0080
0.0120
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0080
0.0120
0.0000
0.0000
0.0000
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-41 D 6m
6.31
0.0
0.00
MQ-52 6m
38.78
0.0
0.00
MQ-41 D 6m
6.33
0.0
0.00
MQ-21 6m
0.02
0.0
0.00
MQ-21 6m
0.02
0.0
0.00
Beam No.
2
3
(Design load)
Designation
Forces[kN]
Moments[kNm]
Utilization[%]
MQP-82
2.3230
0.0080
-0.0790
0.0000
0.0790
0.0040
22.00
MQW-4
-0.0800
0.0000
-2.2900
0.0000
0.0000
0.0000
45.00
MQW-4
0.0800
0.0000
-2.3000
0.0000
0.0000
0.0000
46.00
MQP-82
2.3390
-0.0080
0.0790
0.0000
-0.0790
-0.0040
22.00
MQP-45
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQP-45
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
99
Contact:
Page:
10 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
Support No.
5
7
01-Mar-15
(Design load)
Designation
Forces[kN]
Moments[kNm]
MQP-82
-0.0790
-0.0080
2.3230
0.0040
-0.0790
0.0000
MQP-82
-0.0790
-0.0080
2.3390
0.0040
-0.0790
0.0000
MQP-45
0.0000
0.0080
0.0120
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0080
0.0120
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
100
Contact:
Page:
11 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Stress:
Beam No. 1: MQ-41 D 6m
Position
[m]
0.00
0.00
0.00
Actual
[kN/m]
39,720.000
1,120.000
39,730.000
Limit
[kN/m]
245,450.000
141,710.000
245,450.000
Utilization
[%]
16.18
0.79
16.19
[m]
0.19
0.37
0.37
Actual
[kN/m]
-147,290.000
18,680.000
147,730.000
Limit
[kN/m]
254,550.000
146,960.000
254,550.000
Utilization
[%]
57.86
12.71
58.04
[m]
0.00
0.00
0.00
Actual
[kN/m]
39,760.000
-1,120.000
39,770.000
Limit
[kN/m]
245,450.000
141,710.000
245,450.000
Utilization
[%]
16.20
0.79
16.20
[m]
0.00
0.00
0.00
Actual
[kN/m]
120.000
0.000
120.000
Limit
[kN/m]
263,640.000
0.000
263,640.000
Utilization
[%]
0.05
0.00
0.05
[m]
0.00
0.00
0.00
Actual
[kN/m]
120.000
0.000
120.000
Limit
[kN/m]
263,640.000
0.000
263,640.000
Utilization
[%]
0.05
0.00
0.05
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
101
Contact:
Page:
12 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Displacement SLS1:
Beam No.
Value
Position [m]
Max. Displacement
1.00
Displacement [mm]
Utilization
u-X
u-Y
u-Z
[%]
0.0
0.0
0.0
0.63
Max. Displacement
0.28
0.0
0.0
0.6
21.54
Max. Displacement
1.00
0.0
0.0
0.0
0.63
Max. Displacement
0.42
0.0
0.0
0.0
0.49
Max. Displacement
0.42
0.0
0.0
0.0
0.49
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
102
Contact:
Page:
13 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
(Design load)
Support load:
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
-0.0120
3.4760
0.0060
0.0000
0.0000
0.0000
-0.0120
3.5010
0.0060
0.0000
0.0000
0.0000
0.0120
0.0180
0.0000
0.0000
0.0000
0.0000
0.0120
0.0180
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.2640
-0.0080
2.3230
0.0040
0.2640
0.0000
0.2640
-0.0080
2.3390
0.0040
0.2640
0.0000
0.0000
0.0080
0.0120
0.0000
0.0000
0.0000
0.0000
0.0080
0.0120
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
-0.2640
-0.0080
2.3230
0.0040
-0.2640
0.0000
-0.2640
-0.0080
2.3390
0.0040
-0.2640
0.0000
0.0000
0.0080
0.0120
0.0000
0.0000
0.0000
0.0000
0.0080
0.0120
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
103
Contact:
Page:
14 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0790
-0.0080
2.3230
0.0040
0.0790
0.0000
0.0790
-0.0080
2.3390
0.0040
0.0790
0.0000
0.0000
0.0080
0.0120
0.0000
0.0000
0.0000
0.0000
0.0080
0.0120
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
-0.0790
-0.0080
2.3230
0.0040
-0.0790
0.0000
-0.0790
-0.0080
2.3390
0.0040
-0.0790
0.0000
0.0000
0.0080
0.0120
0.0000
0.0000
0.0000
0.0000
0.0080
0.0120
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
104
Contact:
Page:
15 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
105
Contact:
Page:
1 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
106
Contact:
Page:
2 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Calculation factors:
Load type:
Seismic
LC1: g
LC2: q
LC3: Ex
Earthquake in X-direction
LC4: Ey
Earthquake in Y-direction
1.1
1.5
1.35
Load combinations:
ULS1 = 1.35*LC1+1.5*LC2
SLS1 = 1*LC1+1*LC2
ULS2 = 1*LC1+1*LC2+1*LC4
ULS3 = 1*LC1+1*LC2-1*LC4
ULS4 = 1*LC1+1*LC2+0.3*LC4
ULS5 = 1*LC1+1*LC2-0.3*LC4
Maximum beam allowable deflection:
200
150
1.5
Local
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
107
Contact:
Page:
3 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Parts List:
Channels
Description
Item
Pos
Qty
369604
369605
Item
Weight [kg]
Node No.
369585
1.6
Beam No.
0.59
4,5
9.1
1.12
1,3
3.7
0.52
Connections
Description
Pos
Qty
369660
0.8
6,8
369649
0.7
5,7
369652
3.8
1,4
369658
1.0
2,3
Fixations
Description
Item
Pos
Qty
28
369623
371587
Fixation text
Accessories
Pos
Qty
10
Description
Channel end cap MQZ-E41
Item
369685
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
0.0
0.00
108
Contact:
Page:
4 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Static model:
Node
Hinged axis
Connection
No.
0.0000
0.0000
0.0000
0.0000
0.0000
1.0000
Y,Z
MQW-4 double
0.6000
0.0000
1.0000
Y,Z
MQW-4 double
0.6000
0.0000
0.0000
0.0000
-0.5000
0.0000
X,Y,Z
0.0000
0.0000
0.5000
X,Z
0.6000
-0.5000
0.0000
X,Y,Z
0.6000
0.0000
0.5000
X,Z
MQP-82
Building material
Concrete
MQP-82
Concrete
MQP-45
Concrete
MQW-8/45 r
MQP-45
Concrete
MQW-8/45 r
Beams
Beam
Channel
No.
Length
Rotation
Iy
Iz
[m]
[]
[cm]
[cm]
[cm]
[kN/m]
MQ-41 D 6m
1.00
180
4.903
30.6875
14.6682
210,000,000.
MQ-52-72 D 6m
0.60
180
8.449
115
26.1297
210,000,000.
MQ-41 D 6m
1.00
4.903
30.6875
14.6682
210,000,000.
MQ-21 6m
0.71
1.653
0.9174
4.3914
210,000,000.
MQ-21 6m
0.71
1.653
0.9174
4.3914
210,000,000.
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
109
Contact:
Page:
5 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Point loads
No.
No.
1
2
Position
Forces [kN]
Moments [kNm]
Forces [kN]
[m]
Ex
Ey
0.20
0.0000
0.0000
4.9000
0.0000
0.0000
0.0000
0.0000
0.4234
0.40
0.0000
0.0000
4.9000
0.0000
0.0000
0.0000
0.0000
0.4234
Load description
No.
Type
Custom load
Custom load
Description
Size [mm]
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Span [m]
110
Contact:
Page:
6 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Calculation summary
1 Beams
(1) Connections
[1] Supports
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-41 D 6m
6.73
0.0
0.00
MQ-52-72 D 6m
32.26
0.0
0.00
MQ-41 D 6m
6.73
0.0
0.00
MQ-21 6m
0.09
0.0
0.00
MQ-21 6m
0.09
0.0
0.00
Beam No.
(Design load)
Designation
Forces[kN]
X
Moments[kNm]
Z
Utilization[%]
MQP-82
7.4100
0.0250
0.0000
0.0000
0.0000
0.0120
49.00
MQW-4 double
0.0000
0.0000
-7.3800
0.0000
0.0000
0.0000
98.00
MQW-4 double
0.0000
0.0000
-7.3800
0.0000
0.0000
0.0000
98.00
MQP-82
7.4100
-0.0250
0.0000
0.0000
0.0000
-0.0120
49.00
MQP-45
0.0400
0.0000
0.0000
0.0000
0.0000
0.0000
1.00
MQW-8/45 r
0.0300
0.0000
0.0000
0.0000
0.0000
0.0000
1.00
MQP-45
0.0400
0.0000
0.0000
0.0000
0.0000
0.0000
1.00
MQW-8/45 r
0.0300
0.0000
0.0000
0.0000
0.0000
0.0000
1.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
111
Contact:
Page:
7 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Support No.
5
7
01-Mar-15
Forces[kN]
Designation
Moments[kNm]
MQP-82
0.0000
-0.0250
7.4100
0.0120
0.0000
0.0000
MQP-82
0.0000
-0.0250
7.4100
0.0120
0.0000
0.0000
MQP-45
0.0000
0.0250
0.0310
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0250
0.0310
0.0000
0.0000
0.0000
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-41 D 6m
16.24
0.0
0.00
MQ-52-72 D 6m
23.72
0.0
0.00
MQ-41 D 6m
16.24
0.0
0.00
MQ-21 6m
3.30
0.0
0.00
MQ-21 6m
3.30
0.0
0.00
(Design load)
Beam No.
2
3
Designation
Forces[kN]
Moments[kNm]
Utilization[%]
MQP-82
3.9480
0.5920
0.0000
0.0000
0.0000
0.0840
79.00
MQW-4 double
0.0000
0.4200
-4.9200
0.0000
0.0000
0.0000
81.00
MQW-4 double
0.0000
0.4200
-4.9200
0.0000
0.0000
0.0000
81.00
MQP-82
3.9480
-0.5920
0.0000
0.0000
0.0000
-0.0840
79.00
MQP-45
1.4400
0.0000
0.0000
0.0000
0.0000
0.0000
21.00
MQW-8/45 r
1.4300
0.0000
0.0000
0.0000
0.0000
0.0000
34.00
MQP-45
1.4400
0.0000
0.0000
0.0000
0.0000
0.0000
21.00
MQW-8/45 r
1.4300
0.0000
0.0000
0.0000
0.0000
0.0000
34.00
Support No.
5
7
(Design load)
Designation
Forces[kN]
Moments[kNm]
MQP-82
0.0000
-0.5920
3.9480
0.0840
0.0000
0.0000
MQP-82
0.0000
-0.5920
3.9480
0.0840
0.0000
0.0000
MQP-45
0.0000
1.0150
1.0190
0.0000
0.0000
0.0000
MQP-45
0.0000
1.0150
1.0190
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
112
Contact:
Page:
8 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Designation
Torsion
Stress
Torsion
[%]
[]
[%]
MQ-41 D 6m
17.13
0.0
0.00
MQ-52-72 D 6m
23.72
0.0
0.00
MQ-41 D 6m
17.13
0.0
0.00
MQ-21 6m
3.19
0.0
0.00
MQ-21 6m
3.19
0.0
0.00
(Design load)
Beam No.
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MQP-82
5.9450
-0.5590
0.0000
0.0000
0.0000
-0.0680
66.00
MQW-4 double
0.0000
-0.4200
-4.9200
0.0000
0.0000
0.0000
81.00
MQW-4 double
0.0000
-0.4200
-4.9200
0.0000
0.0000
0.0000
81.00
MQP-82
5.9450
0.5590
0.0000
0.0000
0.0000
0.0680
66.00
MQP-45
-1.3900
0.0000
0.0000
0.0000
0.0000
0.0000
14.00
MQW-8/45 r
-1.3900
0.0000
0.0000
0.0000
0.0000
0.0000
33.00
MQP-45
-1.3900
0.0000
0.0000
0.0000
0.0000
0.0000
14.00
MQW-8/45 r
-1.3900
0.0000
0.0000
0.0000
0.0000
0.0000
33.00
(Design load)
Forces[kN]
Moments[kNm]
Node No.
Support No.
MQP-82
0.0000
0.5590
5.9450
-0.0680
0.0000
0.0000
MQP-82
0.0000
0.5590
5.9450
-0.0680
0.0000
0.0000
MQP-45
0.0000
-0.9820
-0.9770
0.0000
0.0000
0.0000
MQP-45
0.0000
-0.9820
-0.9770
0.0000
0.0000
0.0000
Designation
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-41 D 6m
7.56
0.0
0.00
MQ-52-72 D 6m
22.31
0.0
0.00
MQ-41 D 6m
7.56
0.0
0.00
MQ-21 6m
1.03
0.0
0.00
MQ-21 6m
1.03
0.0
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
113
Contact:
Page:
9 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Beam No.
01-Mar-15
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MQP-82
4.6470
0.1890
0.0000
0.0000
0.0000
0.0310
34.00
MQW-4 double
0.0000
0.1300
-4.9200
0.0000
0.0000
0.0000
65.00
MQW-4 double
0.0000
0.1300
-4.9200
0.0000
0.0000
0.0000
65.00
MQP-82
4.6470
-0.1890
0.0000
0.0000
0.0000
-0.0310
34.00
MQP-45
0.4500
0.0000
0.0000
0.0000
0.0000
0.0000
6.00
MQW-8/45 r
0.4400
0.0000
0.0000
0.0000
0.0000
0.0000
10.00
MQP-45
0.4500
0.0000
0.0000
0.0000
0.0000
0.0000
6.00
MQW-8/45 r
0.4400
0.0000
0.0000
0.0000
0.0000
0.0000
10.00
(Design load)
Support No.
4
5
7
Forces[kN]
Designation
Moments[kNm]
MQP-82
0.0000
-0.1890
4.6470
0.0310
0.0000
0.0000
MQP-82
0.0000
-0.1890
4.6470
0.0310
0.0000
0.0000
MQP-45
0.0000
0.3160
0.3210
0.0000
0.0000
0.0000
MQP-45
0.0000
0.3160
0.3210
0.0000
0.0000
0.0000
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-41 D 6m
7.81
0.0
0.00
MQ-52-72 D 6m
22.31
0.0
0.00
MQ-41 D 6m
7.81
0.0
0.00
MQ-21 6m
0.92
0.0
0.00
MQ-21 6m
0.92
0.0
0.00
Beam No.
2
3
(Design load)
Designation
Forces[kN]
Moments[kNm]
Utilization[%]
MQP-82
5.2460
-0.1560
0.0000
0.0000
0.0000
-0.0150
36.00
MQW-4 double
0.0000
-0.1300
-4.9200
0.0000
0.0000
0.0000
65.00
MQW-4 double
0.0000
-0.1300
-4.9200
0.0000
0.0000
0.0000
65.00
MQP-82
5.2460
0.1560
0.0000
0.0000
0.0000
0.0150
36.00
MQP-45
-0.4000
0.0000
0.0000
0.0000
0.0000
0.0000
4.00
MQW-8/45 r
-0.4000
0.0000
0.0000
0.0000
0.0000
0.0000
10.00
MQP-45
-0.4000
0.0000
0.0000
0.0000
0.0000
0.0000
4.00
MQW-8/45 r
-0.4000
0.0000
0.0000
0.0000
0.0000
0.0000
10.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
114
Contact:
Page:
10 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
Support No.
5
7
01-Mar-15
(Design load)
Designation
Forces[kN]
Moments[kNm]
MQP-82
0.0000
0.1560
5.2460
-0.0150
0.0000
0.0000
MQP-82
0.0000
0.1560
5.2460
-0.0150
0.0000
0.0000
MQP-45
0.0000
-0.2830
-0.2780
0.0000
0.0000
0.0000
MQP-45
0.0000
-0.2830
-0.2780
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
115
Contact:
Page:
11 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Stress:
Beam No. 1: MQ-41 D 6m
Position
[m]
0.50
0.00
0.50
Actual
[kN/m]
41,660.000
4,180.000
42,030.000
Limit
[kN/m]
245,450.000
141,710.000
245,450.000
Utilization
[%]
16.97
2.95
17.13
[m]
0.20
0.00
0.20
Actual
[kN/m]
-78,990.000
-15,900.000
79,190.000
Limit
[kN/m]
245,450.000
141,710.000
245,450.000
Utilization
[%]
32.18
11.22
32.26
[m]
0.50
0.00
0.50
Actual
[kN/m]
41,660.000
-4,180.000
42,030.000
Limit
[kN/m]
245,450.000
141,710.000
245,450.000
Utilization
[%]
16.97
2.95
17.13
[m]
0.00
0.00
0.00
Actual
[kN/m]
8,710.000
0.000
8,710.000
Limit
[kN/m]
263,640.000
0.000
263,640.000
Utilization
[%]
3.30
0.00
3.30
[m]
0.00
0.00
0.00
Actual
[kN/m]
8,710.000
0.000
8,710.000
Limit
[kN/m]
263,640.000
0.000
263,640.000
Utilization
[%]
3.30
0.00
3.30
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
116
Contact:
Page:
12 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Displacement SLS1:
Beam No.
Value
Position [m]
u-X
u-Y
u-Z
[%]
Max. Displacement
1.00
0.0
0.0
0.0
1.34
Max. Displacement
0.30
0.0
0.0
0.2
6.14
Max. Displacement
1.00
0.0
0.0
0.0
1.34
Max. Displacement
0.53
0.0
0.0
0.0
0.73
Max. Displacement
0.53
0.0
0.0
0.0
0.73
Displacement [mm]
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Utilization
117
Contact:
Page:
13 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
(Design load)
Support load:
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
-0.0250
7.4100
0.0120
0.0000
0.0000
0.0000
-0.0250
7.4100
0.0120
0.0000
0.0000
0.0000
0.0250
0.0310
0.0000
0.0000
0.0000
0.0000
0.0250
0.0310
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
-0.5920
3.9480
0.0840
0.0000
0.0000
0.0000
-0.5920
3.9480
0.0840
0.0000
0.0000
0.0000
1.0150
1.0190
0.0000
0.0000
0.0000
0.0000
1.0150
1.0190
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
0.5590
5.9450
-0.0680
0.0000
0.0000
0.0000
0.5590
5.9450
-0.0680
0.0000
0.0000
0.0000
-0.9820
-0.9770
0.0000
0.0000
0.0000
0.0000
-0.9820
-0.9770
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
118
Contact:
Page:
14 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
-0.1890
4.6470
0.0310
0.0000
0.0000
0.0000
-0.1890
4.6470
0.0310
0.0000
0.0000
0.0000
0.3160
0.3210
0.0000
0.0000
0.0000
0.0000
0.3160
0.3210
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
0.1560
5.2460
-0.0150
0.0000
0.0000
0.0000
0.1560
5.2460
-0.0150
0.0000
0.0000
0.0000
-0.2830
-0.2780
0.0000
0.0000
0.0000
0.0000
-0.2830
-0.2780
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
119
Contact:
Page:
15 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
120
Contact:
Page:
1 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
121
Contact:
Page:
2 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Calculation factors:
Load type:
Seismic
LC1: g
LC2: q
LC3: Ex
Earthquake in X-direction
LC4: Ey
Earthquake in Y-direction
1.1
1.5
1.35
Load combinations:
ULS1 = 1.35*LC1+1.5*LC2
SLS1 = 1*LC1+1*LC2
ULS2 = 1*LC1+1*LC2+1*LC3
ULS3 = 1*LC1+1*LC2-1*LC3
ULS4 = 1*LC1+1*LC2+0.3*LC3
ULS5 = 1*LC1+1*LC2-0.3*LC3
Maximum beam allowable deflection:
200
150
1.5
Local
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
122
Contact:
Page:
3 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Parts List:
Channels
Description
Item
Pos
Qty
369604
369605
Item
Weight [kg]
Node No.
369585
1.6
Beam No.
0.59
4,5
9.1
1.12
1,3
3.7
0.52
Connections
Description
Pos
Qty
369660
0.8
6,8
369649
0.7
5,7
369652
3.8
1,4
369658
1.0
2,3
Fixations
Description
Item
Pos
Qty
28
369623
371587
Fixation text
Accessories
Pos
Qty
10
Description
Channel end cap MQZ-E41
Item
369685
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
0.0
0.00
123
Contact:
Page:
4 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Static model:
Node
Hinged axis
Connection
No.
0.0000
0.0000
0.0000
0.0000
0.0000
1.0000
Y,Z
MQW-4 double
0.6000
0.0000
1.0000
Y,Z
MQW-4 double
0.6000
0.0000
0.0000
0.0000
-0.5000
0.0000
X,Y,Z
0.0000
0.0000
0.5000
X,Z
0.6000
-0.5000
0.0000
X,Y,Z
0.6000
0.0000
0.5000
X,Z
MQP-82
Building material
Concrete
MQP-82
Concrete
MQP-45
Concrete
MQW-8/45 r
MQP-45
Concrete
MQW-8/45 r
Beams
Beam
Channel
No.
Length
Rotation
Iy
Iz
[m]
[]
[cm]
[cm]
[cm]
[kN/m]
MQ-41 D 6m
1.00
180
4.903
30.6875
14.6682
210,000,000.
MQ-52-72 D 6m
0.60
180
8.449
115
26.1297
210,000,000.
MQ-41 D 6m
1.00
4.903
30.6875
14.6682
210,000,000.
MQ-21 6m
0.71
1.653
0.9174
4.3914
210,000,000.
MQ-21 6m
0.71
1.653
0.9174
4.3914
210,000,000.
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
124
Contact:
Page:
5 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Point loads
No.
No.
1
2
Position
Forces [kN]
Moments [kNm]
Forces [kN]
[m]
Ex
Ey
0.20
0.0000
0.0000
4.9000
0.0000
0.0000
0.0000
0.4234
0.0000
0.40
0.0000
0.0000
4.9000
0.0000
0.0000
0.0000
0.4230
0.0000
Load description
No.
Type
Custom load
Custom load
Description
Size [mm]
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Span [m]
125
Contact:
Page:
6 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Calculation summary
1 Beams
(1) Connections
[1] Supports
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-41 D 6m
6.73
0.0
0.00
MQ-52-72 D 6m
32.26
0.0
0.00
MQ-41 D 6m
6.73
0.0
0.00
MQ-21 6m
0.09
0.0
0.00
MQ-21 6m
0.09
0.0
0.00
Beam No.
(Design load)
Designation
Forces[kN]
X
Moments[kNm]
Z
Utilization[%]
MQP-82
7.4100
0.0250
0.0000
0.0000
0.0000
0.0120
49.00
MQW-4 double
0.0000
0.0000
-7.3800
0.0000
0.0000
0.0000
98.00
MQW-4 double
0.0000
0.0000
-7.3800
0.0000
0.0000
0.0000
98.00
MQP-82
7.4100
-0.0250
0.0000
0.0000
0.0000
-0.0120
49.00
MQP-45
0.0400
0.0000
0.0000
0.0000
0.0000
0.0000
1.00
MQW-8/45 r
0.0300
0.0000
0.0000
0.0000
0.0000
0.0000
1.00
MQP-45
0.0400
0.0000
0.0000
0.0000
0.0000
0.0000
1.00
MQW-8/45 r
0.0300
0.0000
0.0000
0.0000
0.0000
0.0000
1.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
126
Contact:
Page:
7 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Support No.
5
7
01-Mar-15
Forces[kN]
Designation
Moments[kNm]
MQP-82
0.0000
-0.0250
7.4100
0.0120
0.0000
0.0000
MQP-82
0.0000
-0.0250
7.4100
0.0120
0.0000
0.0000
MQP-45
0.0000
0.0250
0.0310
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0250
0.0310
0.0000
0.0000
0.0000
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-41 D 6m
27.63
0.0
0.00
MQ-52-72 D 6m
21.71
0.0
0.00
MQ-41 D 6m
27.63
0.0
0.00
MQ-21 6m
0.07
0.0
0.00
MQ-21 6m
0.07
0.0
0.00
(Design load)
Beam No.
Forces[kN]
Designation
MQP-82
Moments[kNm]
Utilization[%]
4.9460
0.0160
0.4230
0.0000
-0.4230
0.0080
65.00
MQW-4 double
0.4200
0.0000
-4.9200
0.0000
0.0000
0.0000
65.00
MQW-4 double
-0.4200
0.0000
-4.9200
0.0000
0.0000
0.0000
65.00
MQP-82
4.9460
-0.0160
-0.4230
0.0000
0.4230
-0.0080
65.00
MQP-45
0.0300
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0200
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQP-45
0.0300
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0200
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
Support No.
5
7
(Design load)
Designation
Forces[kN]
Moments[kNm]
MQP-82
0.4230
-0.0160
4.9460
0.0080
0.4230
0.0000
MQP-82
0.4230
-0.0160
4.9460
0.0080
0.4230
0.0000
MQP-45
0.0000
0.0160
0.0210
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0160
0.0210
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
127
Contact:
Page:
8 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Designation
Torsion
Stress
Torsion
[%]
[]
[%]
MQ-41 D 6m
27.63
0.0
0.00
MQ-52-72 D 6m
21.71
0.0
0.00
MQ-41 D 6m
27.63
0.0
0.00
MQ-21 6m
0.07
0.0
0.00
MQ-21 6m
0.07
0.0
0.00
(Design load)
Beam No.
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MQP-82
4.9460
0.0160
-0.4230
0.0000
0.4230
0.0080
65.00
MQW-4 double
-0.4200
0.0000
-4.9200
0.0000
0.0000
0.0000
65.00
MQW-4 double
0.4200
0.0000
-4.9200
0.0000
0.0000
0.0000
65.00
MQP-82
4.9460
-0.0160
0.4230
0.0000
-0.4230
-0.0080
65.00
MQP-45
0.0300
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0200
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQP-45
0.0300
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0200
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
(Design load)
Forces[kN]
Moments[kNm]
Node No.
Support No.
MQP-82
-0.4230
-0.0160
4.9460
0.0080
-0.4230
0.0000
MQP-82
-0.4230
-0.0160
4.9460
0.0080
-0.4230
0.0000
MQP-45
0.0000
0.0160
0.0210
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0160
0.0210
0.0000
0.0000
0.0000
Designation
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-41 D 6m
11.73
0.0
0.00
MQ-52-72 D 6m
21.57
0.0
0.00
MQ-41 D 6m
11.73
0.0
0.00
MQ-21 6m
0.07
0.0
0.00
MQ-21 6m
0.07
0.0
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
128
Contact:
Page:
9 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Beam No.
01-Mar-15
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MQP-82
4.9460
0.0160
0.1270
0.0000
-0.1270
0.0080
43.00
MQW-4 double
0.1300
0.0000
-4.9200
0.0000
0.0000
0.0000
65.00
MQW-4 double
-0.1300
0.0000
-4.9200
0.0000
0.0000
0.0000
65.00
MQP-82
4.9460
-0.0160
-0.1270
0.0000
0.1270
-0.0080
43.00
MQP-45
0.0300
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0200
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQP-45
0.0300
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0200
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
(Design load)
Support No.
4
5
7
Forces[kN]
Designation
Moments[kNm]
MQP-82
0.1270
-0.0160
4.9460
0.0080
0.1270
0.0000
MQP-82
0.1270
-0.0160
4.9460
0.0080
0.1270
0.0000
MQP-45
0.0000
0.0160
0.0210
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0160
0.0210
0.0000
0.0000
0.0000
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-41 D 6m
11.73
0.0
0.00
MQ-52-72 D 6m
21.57
0.0
0.00
MQ-41 D 6m
11.73
0.0
0.00
MQ-21 6m
0.07
0.0
0.00
MQ-21 6m
0.07
0.0
0.00
Beam No.
2
3
(Design load)
Designation
Forces[kN]
Moments[kNm]
Utilization[%]
MQP-82
4.9460
0.0160
-0.1270
0.0000
0.1270
0.0080
43.00
MQW-4 double
-0.1300
0.0000
-4.9200
0.0000
0.0000
0.0000
65.00
MQW-4 double
0.1300
0.0000
-4.9200
0.0000
0.0000
0.0000
65.00
MQP-82
4.9460
-0.0160
0.1270
0.0000
-0.1270
-0.0080
43.00
MQP-45
0.0300
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0200
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQP-45
0.0300
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0200
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
129
Contact:
Page:
10 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
Support No.
5
7
01-Mar-15
(Design load)
Designation
Forces[kN]
Moments[kNm]
MQP-82
-0.1270
-0.0160
4.9460
0.0080
-0.1270
0.0000
MQP-82
-0.1270
-0.0160
4.9460
0.0080
-0.1270
0.0000
MQP-45
0.0000
0.0160
0.0210
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0160
0.0210
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
130
Contact:
Page:
11 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Stress:
Beam No. 1: MQ-41 D 6m
Position
[m]
0.00
0.00
0.00
Actual
[kN/m]
67,820.000
1,830.000
67,830.000
Limit
[kN/m]
245,450.000
141,710.000
245,450.000
Utilization
[%]
27.63
1.29
27.63
[m]
0.20
0.00
0.20
Actual
[kN/m]
-78,990.000
-15,900.000
79,190.000
Limit
[kN/m]
245,450.000
141,710.000
245,450.000
Utilization
[%]
32.18
11.22
32.26
[m]
0.00
0.00
0.00
Actual
[kN/m]
67,820.000
-1,830.000
67,830.000
Limit
[kN/m]
245,450.000
141,710.000
245,450.000
Utilization
[%]
27.63
1.29
27.63
[m]
0.00
0.00
0.00
Actual
[kN/m]
240.000
0.000
240.000
Limit
[kN/m]
263,640.000
0.000
263,640.000
Utilization
[%]
0.09
0.00
0.09
[m]
0.00
0.00
0.00
Actual
[kN/m]
240.000
0.000
240.000
Limit
[kN/m]
263,640.000
0.000
263,640.000
Utilization
[%]
0.09
0.00
0.09
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
131
Contact:
Page:
12 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Displacement SLS1:
Beam No.
Value
Position [m]
u-X
u-Y
u-Z
[%]
Max. Displacement
1.00
0.0
0.0
0.0
1.34
Max. Displacement
0.30
0.0
0.0
0.2
6.14
Max. Displacement
1.00
0.0
0.0
0.0
1.34
Max. Displacement
0.53
0.0
0.0
0.0
0.73
Max. Displacement
0.53
0.0
0.0
0.0
0.73
Displacement [mm]
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Utilization
132
Contact:
Page:
13 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
(Design load)
Support load:
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
-0.0250
7.4100
0.0120
0.0000
0.0000
0.0000
-0.0250
7.4100
0.0120
0.0000
0.0000
0.0000
0.0250
0.0310
0.0000
0.0000
0.0000
0.0000
0.0250
0.0310
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.4230
-0.0160
4.9460
0.0080
0.4230
0.0000
0.4230
-0.0160
4.9460
0.0080
0.4230
0.0000
0.0000
0.0160
0.0210
0.0000
0.0000
0.0000
0.0000
0.0160
0.0210
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
-0.4230
-0.0160
4.9460
0.0080
-0.4230
0.0000
-0.4230
-0.0160
4.9460
0.0080
-0.4230
0.0000
0.0000
0.0160
0.0210
0.0000
0.0000
0.0000
0.0000
0.0160
0.0210
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
133
Contact:
Page:
14 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.1270
-0.0160
4.9460
0.0080
0.1270
0.0000
0.1270
-0.0160
4.9460
0.0080
0.1270
0.0000
0.0000
0.0160
0.0210
0.0000
0.0000
0.0000
0.0000
0.0160
0.0210
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
-0.1270
-0.0160
4.9460
0.0080
-0.1270
0.0000
-0.1270
-0.0160
4.9460
0.0080
-0.1270
0.0000
0.0000
0.0160
0.0210
0.0000
0.0000
0.0000
0.0000
0.0160
0.0210
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
134
Contact:
Page:
15 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
135
Contact:
Page:
1 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
136
Contact:
Page:
2 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Calculation factors:
Load type:
Seismic
LC1: g
LC2: q
LC3: Ex
Earthquake in X-direction
LC4: Ey
Earthquake in Y-direction
1.1
1.5
1.35
Load combinations:
ULS1 = 1.35*LC1+1.5*LC2
SLS1 = 1*LC1+1*LC2
ULS2 = 1*LC1+1*LC2+1*LC4
ULS3 = 1*LC1+1*LC2-1*LC4
ULS4 = 1*LC1+1*LC2+0.3*LC4
ULS5 = 1*LC1+1*LC2-0.3*LC4
Maximum beam allowable deflection:
200
150
1.5
Local
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
137
Contact:
Page:
3 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Parts List:
Channels
Pos
Qty
2
3
Description
Item
369585
1.6
369604
369605
Beam No.
0.59
4,5
10.3
1.26
1,3
4.4
0.62
Item
Weight [kg]
Node No.
Connections
Description
Pos
Qty
369660
0.8
6,8
369649
0.7
5,7
369652
3.8
1,4
369665
2.4
2,3
Fixations
Description
Item
Pos
Qty
28
369623
371587
Fixation text
Accessories
Pos
Qty
10
Description
Channel end cap MQZ-E41
Item
369685
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
0.0
0.00
138
Contact:
Page:
4 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Static model:
Node
Hinged axis
Connection
No.
0.0000
0.0000
0.0000
0.0000
0.0000
1.0000
Y,Z
MQW-S/2
0.7000
0.0000
1.0000
Y,Z
MQW-S/2
0.7000
0.0000
0.0000
0.0000
-0.5000
0.0000
X,Y,Z
0.0000
0.0000
0.5000
X,Z
0.7000
-0.5000
0.0000
X,Y,Z
0.7000
0.0000
0.5000
X,Z
MQP-82
Building material
Concrete
MQP-82
Concrete
MQP-45
Concrete
MQW-8/45 r
MQP-45
Concrete
MQW-8/45 r
Beams
Beam
Channel
No.
Length
Rotation
Iy
Iz
[m]
[]
[cm]
[cm]
[cm]
[kN/m]
MQ-41 D 6m
1.00
180
4.903
30.6875
14.6682
210,000,000.
MQ-52-72 D 6m
0.70
180
8.449
115
26.1297
210,000,000.
MQ-41 D 6m
1.00
4.903
30.6875
14.6682
210,000,000.
MQ-21 6m
0.71
1.653
0.9174
4.3914
210,000,000.
MQ-21 6m
0.71
1.653
0.9174
4.3914
210,000,000.
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
139
Contact:
Page:
5 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Point loads
No.
No.
1
2
Position
Forces [kN]
Moments [kNm]
Forces [kN]
[m]
Ex
Ey
0.23
0.0000
0.0000
5.7750
0.0000
0.0000
0.0000
0.0000
0.5000
0.47
0.0000
0.0000
5.7750
0.0000
0.0000
0.0000
0.0000
0.5000
Load description
No.
Type
Custom load
Custom load
Description
Size [mm]
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Span [m]
140
Contact:
Page:
6 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Calculation summary
1 Beams
(1) Connections
[1] Supports
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-41 D 6m
7.84
0.0
0.00
MQ-52-72 D 6m
44.52
0.0
0.00
MQ-41 D 6m
7.81
0.0
0.00
MQ-21 6m
0.11
0.0
0.00
MQ-21 6m
0.11
0.0
0.00
Beam No.
3
4
(Design load)
Designation
Forces[kN]
Moments[kNm]
Utilization[%]
MQP-82
8.7350
0.0290
0.0000
0.0000
0.0000
0.0150
58.00
MQW-S/2
0.0000
0.0000
8.7100
0.0000
0.0000
0.0000
69.00
MQW-S/2
0.0000
0.0000
8.6800
0.0000
0.0000
0.0000
69.00
MQP-82
8.7110
-0.0290
0.0000
0.0000
0.0000
-0.0150
58.00
MQP-45
0.0500
0.0000
0.0000
0.0000
0.0000
0.0000
1.00
MQW-8/45 r
0.0400
0.0000
0.0000
0.0000
0.0000
0.0000
1.00
MQP-45
0.0500
0.0000
0.0000
0.0000
0.0000
0.0000
1.00
MQW-8/45 r
0.0400
0.0000
0.0000
0.0000
0.0000
0.0000
1.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
141
Contact:
Page:
7 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Support No.
5
7
01-Mar-15
Forces[kN]
Designation
Moments[kNm]
MQP-82
0.0000
-0.0290
8.7350
0.0150
0.0000
0.0000
MQP-82
0.0000
-0.0290
8.7110
0.0150
0.0000
0.0000
MQP-45
0.0000
0.0290
0.0350
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0290
0.0350
0.0000
0.0000
0.0000
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-41 D 6m
19.29
0.0
0.00
MQ-52-72 D 6m
32.93
0.0
0.00
MQ-41 D 6m
19.27
0.0
0.00
MQ-21 6m
3.90
0.0
0.00
MQ-21 6m
3.90
0.0
0.00
(Design load)
Beam No.
2
3
Designation
Forces[kN]
Moments[kNm]
Utilization[%]
MQP-82
4.6480
0.7010
0.0000
0.0000
0.0000
0.1000
94.00
MQW-S/2
0.0000
-0.5000
5.8100
0.0000
0.0000
0.0000
81.00
MQW-S/2
0.0000
-0.5000
5.7900
0.0000
0.0000
0.0000
81.00
MQP-82
4.6350
-0.6990
0.0000
0.0000
0.0000
-0.1000
94.00
MQP-45
1.7000
0.0000
0.0000
0.0000
0.0000
0.0000
24.00
MQW-8/45 r
1.7000
0.0000
0.0000
0.0000
0.0000
0.0000
40.00
MQP-45
1.7000
0.0000
0.0000
0.0000
0.0000
0.0000
24.00
MQW-8/45 r
1.6900
0.0000
0.0000
0.0000
0.0000
0.0000
40.00
Support No.
5
7
(Design load)
Designation
Forces[kN]
Moments[kNm]
MQP-82
0.0000
-0.7010
4.6480
0.1000
0.0000
0.0000
MQP-82
0.0000
-0.6990
4.6350
0.1000
0.0000
0.0000
MQP-45
0.0000
1.2010
1.2060
0.0000
0.0000
0.0000
MQP-45
0.0000
1.1980
1.2020
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
142
Contact:
Page:
8 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Designation
Torsion
Stress
Torsion
[%]
[]
[%]
MQ-41 D 6m
20.33
0.0
0.00
MQ-52-72 D 6m
32.93
0.0
0.00
MQ-41 D 6m
20.31
0.0
0.00
MQ-21 6m
3.79
0.0
0.00
MQ-21 6m
3.76
0.0
0.00
(Design load)
Beam No.
3
4
Forces[kN]
Designation
Moments[kNm]
MQP-82
7.0120
-0.6620
0.0000
MQW-S/2
0.0000
0.5000
5.8100
MQW-S/2
0.0000
0.5000
MQP-82
6.9920
0.6600
MQP-45
-1.6400
MQW-8/45 r
MQP-45
MQW-8/45 r
Utilization[%]
0.0000
0.0000
-0.0800
77.00
0.0000
0.0000
0.0000
81.00
5.7900
0.0000
0.0000
0.0000
81.00
0.0000
0.0000
0.0000
0.0800
77.00
0.0000
0.0000
0.0000
0.0000
0.0000
17.00
-1.6500
0.0000
0.0000
0.0000
0.0000
0.0000
39.00
-1.6400
0.0000
0.0000
0.0000
0.0000
0.0000
17.00
-1.6400
0.0000
0.0000
0.0000
0.0000
0.0000
39.00
(Design load)
Forces[kN]
Moments[kNm]
Node No.
Support No.
MQP-82
0.0000
0.6620
7.0120
-0.0800
0.0000
0.0000
MQP-82
0.0000
0.6600
6.9920
-0.0800
0.0000
0.0000
MQP-45
0.0000
-1.1620
-1.1580
0.0000
0.0000
0.0000
MQP-45
0.0000
-1.1590
-1.1540
0.0000
0.0000
0.0000
Designation
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-41 D 6m
9.45
0.0
0.00
MQ-52-72 D 6m
30.67
0.0
0.00
MQ-41 D 6m
8.86
0.0
0.00
MQ-21 6m
1.22
0.0
0.00
MQ-21 6m
1.22
0.0
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
143
Contact:
Page:
9 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
(Design load)
Beam No.
MQP-82
MQW-S/2
5
6
Forces[kN]
Designation
Utilization[%]
5.4760
0.2240
0.0000
0.0000
0.0000
0.0370
40.00
0.0000
-0.1500
5.8100
0.0000
0.0000
0.0000
57.00
MQW-S/2
0.0000
-0.1500
5.7900
0.0000
0.0000
0.0000
56.00
MQP-82
5.4600
-0.2230
0.0000
0.0000
0.0000
-0.0370
40.00
MQP-45
0.5300
0.0000
0.0000
0.0000
0.0000
0.0000
8.00
MQW-8/45 r
0.5300
0.0000
0.0000
0.0000
0.0000
0.0000
13.00
MQP-45
0.5300
0.0000
0.0000
0.0000
0.0000
0.0000
8.00
MQW-8/45 r
0.5200
0.0000
0.0000
0.0000
0.0000
0.0000
12.00
(Design load)
Support No.
4
5
7
Moments[kNm]
Forces[kN]
Designation
Moments[kNm]
MQP-82
0.0000
-0.2240
5.4760
0.0370
0.0000
0.0000
MQP-82
0.0000
-0.2230
5.4600
0.0370
0.0000
0.0000
MQP-45
0.0000
0.3740
0.3790
0.0000
0.0000
0.0000
MQP-45
0.0000
0.3730
0.3780
0.0000
0.0000
0.0000
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-41 D 6m
9.74
0.0
0.00
MQ-52-72 D 6m
30.67
0.0
0.00
MQ-41 D 6m
9.15
0.0
0.00
MQ-21 6m
1.10
0.0
0.00
MQ-21 6m
1.10
0.0
0.00
Beam No.
2
3
(Design load)
Designation
Forces[kN]
Moments[kNm]
Utilization[%]
MQP-82
6.1850
-0.1850
0.0000
0.0000
0.0000
-0.0170
42.00
MQW-S/2
0.0000
0.1500
5.8100
0.0000
0.0000
0.0000
57.00
MQW-S/2
0.0000
0.1500
5.7900
0.0000
0.0000
0.0000
56.00
MQP-82
6.1670
0.1840
0.0000
0.0000
0.0000
0.0170
42.00
MQP-45
-0.4700
0.0000
0.0000
0.0000
0.0000
0.0000
5.00
MQW-8/45 r
-0.4800
0.0000
0.0000
0.0000
0.0000
0.0000
11.00
MQP-45
-0.4700
0.0000
0.0000
0.0000
0.0000
0.0000
5.00
MQW-8/45 r
-0.4800
0.0000
0.0000
0.0000
0.0000
0.0000
11.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
144
Contact:
Page:
10 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
Support No.
5
7
01-Mar-15
(Design load)
Designation
Forces[kN]
Moments[kNm]
MQP-82
0.0000
0.1850
6.1850
-0.0170
0.0000
0.0000
MQP-82
0.0000
0.1840
6.1670
-0.0170
0.0000
0.0000
MQP-45
0.0000
-0.3350
-0.3310
0.0000
0.0000
0.0000
MQP-45
0.0000
-0.3340
-0.3300
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
145
Contact:
Page:
11 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Stress:
Beam No. 1: MQ-41 D 6m
Position
[m]
0.50
0.00
0.50
Actual
[kN/m]
49,450.000
4,960.000
49,890.000
Limit
[kN/m]
245,450.000
141,710.000
245,450.000
Utilization
[%]
20.15
3.50
20.33
[m]
0.23
0.00
0.23
Actual
[kN/m]
-109,090.000
-18,770.000
109,280.000
Limit
[kN/m]
245,450.000
141,710.000
245,450.000
Utilization
[%]
44.44
13.25
44.52
[m]
0.50
0.00
0.50
Actual
[kN/m]
49,410.000
-4,960.000
49,850.000
Limit
[kN/m]
245,450.000
141,710.000
245,450.000
Utilization
[%]
20.13
3.50
20.31
[m]
0.00
0.00
0.00
Actual
[kN/m]
10,280.000
0.000
10,280.000
Limit
[kN/m]
263,640.000
0.000
263,640.000
Utilization
[%]
3.90
0.00
3.90
[m]
0.00
0.00
0.00
Actual
[kN/m]
10,280.000
0.000
10,280.000
Limit
[kN/m]
263,640.000
0.000
263,640.000
Utilization
[%]
3.90
0.00
3.90
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
146
Contact:
Page:
12 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Displacement SLS1:
Beam No.
Value
Position [m]
u-X
u-Y
u-Z
[%]
Max. Displacement
1.00
0.0
0.0
0.0
1.58
Max. Displacement
0.35
0.0
0.0
0.3
9.45
Max. Displacement
1.00
0.0
0.0
0.0
1.57
Max. Displacement
0.57
0.0
0.0
0.0
0.83
Max. Displacement
0.57
0.0
0.0
0.0
0.82
Displacement [mm]
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Utilization
147
Contact:
Page:
13 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
(Design load)
Support load:
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
-0.0290
8.7350
0.0150
0.0000
0.0000
0.0000
-0.0290
8.7110
0.0150
0.0000
0.0000
0.0000
0.0290
0.0350
0.0000
0.0000
0.0000
0.0000
0.0290
0.0350
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
-0.7010
4.6480
0.1000
0.0000
0.0000
0.0000
-0.6990
4.6350
0.1000
0.0000
0.0000
0.0000
1.2010
1.2060
0.0000
0.0000
0.0000
0.0000
1.1980
1.2020
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
0.6620
7.0120
-0.0800
0.0000
0.0000
0.0000
0.6600
6.9920
-0.0800
0.0000
0.0000
0.0000
-1.1620
-1.1580
0.0000
0.0000
0.0000
0.0000
-1.1590
-1.1540
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
148
Contact:
Page:
14 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
-0.2240
5.4760
0.0370
0.0000
0.0000
0.0000
-0.2230
5.4600
0.0370
0.0000
0.0000
0.0000
0.3740
0.3790
0.0000
0.0000
0.0000
0.0000
0.3730
0.3780
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
0.1850
6.1850
-0.0170
0.0000
0.0000
0.0000
0.1840
6.1670
-0.0170
0.0000
0.0000
0.0000
-0.3350
-0.3310
0.0000
0.0000
0.0000
0.0000
-0.3340
-0.3300
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
149
Contact:
Page:
15 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
150
Contact:
Page:
1 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
151
Contact:
Page:
2 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Calculation factors:
Load type:
Seismic
LC1: g
LC2: q
LC3: Ex
Earthquake in X-direction
LC4: Ey
Earthquake in Y-direction
1.1
1.5
1.35
Load combinations:
ULS1 = 1.35*LC1+1.5*LC2
SLS1 = 1*LC1+1*LC2
ULS2 = 1*LC1+1*LC2+1*LC3
ULS3 = 1*LC1+1*LC2-1*LC3
ULS4 = 1*LC1+1*LC2+0.3*LC3
ULS5 = 1*LC1+1*LC2-0.3*LC3
Maximum beam allowable deflection:
200
150
1.5
Local
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
152
Contact:
Page:
3 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Parts List:
Channels
Pos
Qty
2
3
Description
Item
369585
1.6
369604
369605
Beam No.
0.59
4,5
10.3
1.26
1,3
4.4
0.62
Item
Weight [kg]
Node No.
Connections
Description
Pos
Qty
369660
0.8
6,8
369649
0.7
5,7
369652
3.8
1,4
369665
2.4
2,3
Fixations
Description
Item
Pos
Qty
28
369623
371587
Fixation text
Accessories
Pos
Qty
10
Description
Channel end cap MQZ-E41
Item
369685
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
0.0
0.00
153
Contact:
Page:
4 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Static model:
Node
Hinged axis
Connection
No.
0.0000
0.0000
0.0000
0.0000
0.0000
1.0000
Y,Z
MQW-S/2
0.7000
0.0000
1.0000
Y,Z
MQW-S/2
0.7000
0.0000
0.0000
0.0000
-0.5000
0.0000
X,Y,Z
0.0000
0.0000
0.5000
X,Z
0.7000
-0.5000
0.0000
X,Y,Z
0.7000
0.0000
0.5000
X,Z
MQP-82
Building material
Concrete
MQP-82
Concrete
MQP-45
Concrete
MQW-8/45 r
MQP-45
Concrete
MQW-8/45 r
Beams
Beam
Channel
No.
Length
Rotation
Iy
Iz
[m]
[]
[cm]
[cm]
[cm]
[kN/m]
MQ-41 D 6m
1.00
180
4.903
30.6875
14.6682
210,000,000.
MQ-52-72 D 6m
0.70
180
8.449
115
26.1297
210,000,000.
MQ-41 D 6m
1.00
4.903
30.6875
14.6682
210,000,000.
MQ-21 6m
0.71
1.653
0.9174
4.3914
210,000,000.
MQ-21 6m
0.71
1.653
0.9174
4.3914
210,000,000.
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
154
Contact:
Page:
5 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Point loads
No.
No.
1
2
Position
Forces [kN]
Moments [kNm]
Forces [kN]
[m]
Ex
Ey
0.23
0.0000
0.0000
5.7750
0.0000
0.0000
0.0000
0.5000
0.0000
0.47
0.0000
0.0000
5.7750
0.0000
0.0000
0.0000
0.5000
0.0000
Load description
No.
Type
Custom load
Custom load
Description
Size [mm]
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Span [m]
155
Contact:
Page:
6 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Calculation summary
1 Beams
(1) Connections
[1] Supports
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-41 D 6m
7.84
0.0
0.00
MQ-52-72 D 6m
44.52
0.0
0.00
MQ-41 D 6m
7.81
0.0
0.00
MQ-21 6m
0.11
0.0
0.00
MQ-21 6m
0.11
0.0
0.00
Beam No.
3
4
(Design load)
Designation
Forces[kN]
Moments[kNm]
Utilization[%]
MQP-82
8.7350
0.0290
0.0000
0.0000
0.0000
0.0150
58.00
MQW-S/2
0.0000
0.0000
8.7100
0.0000
0.0000
0.0000
69.00
MQW-S/2
0.0000
0.0000
8.6800
0.0000
0.0000
0.0000
69.00
MQP-82
8.7110
-0.0290
0.0000
0.0000
0.0000
-0.0150
58.00
MQP-45
0.0500
0.0000
0.0000
0.0000
0.0000
0.0000
1.00
MQW-8/45 r
0.0400
0.0000
0.0000
0.0000
0.0000
0.0000
1.00
MQP-45
0.0500
0.0000
0.0000
0.0000
0.0000
0.0000
1.00
MQW-8/45 r
0.0400
0.0000
0.0000
0.0000
0.0000
0.0000
1.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
156
Contact:
Page:
7 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Support No.
5
7
01-Mar-15
Forces[kN]
Designation
Moments[kNm]
MQP-82
0.0000
-0.0290
8.7350
0.0150
0.0000
0.0000
MQP-82
0.0000
-0.0290
8.7110
0.0150
0.0000
0.0000
MQP-45
0.0000
0.0290
0.0350
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0290
0.0350
0.0000
0.0000
0.0000
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-41 D 6m
32.75
0.0
0.00
MQ-52-72 D 6m
29.85
0.0
0.00
MQ-41 D 6m
32.74
0.0
0.00
MQ-21 6m
0.07
0.0
0.00
MQ-21 6m
0.07
0.0
0.00
(Design load)
Beam No.
Forces[kN]
Designation
MQP-82
Moments[kNm]
5.8300
0.0190
0.5000
0.0000
-0.5000
0.0100
Utilization[%]
77.00
MQW-S/2
0.5000
0.0000
5.8100
0.0000
0.0000
0.0000
73.00
MQW-S/2
-0.5000
0.0000
5.7900
0.0000
0.0000
0.0000
59.00
MQP-82
5.8140
-0.0190
-0.5000
0.0000
0.5000
-0.0100
77.00
MQP-45
0.0300
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0200
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQP-45
0.0300
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0200
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
Support No.
5
7
(Design load)
Designation
Forces[kN]
Moments[kNm]
MQP-82
0.5000
-0.0190
5.8300
0.0100
0.5000
0.0000
MQP-82
0.5000
-0.0190
5.8140
0.0100
0.5000
0.0000
MQP-45
0.0000
0.0190
0.0240
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0190
0.0240
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
157
Contact:
Page:
8 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Designation
Torsion
Stress
Torsion
[%]
[]
[%]
MQ-41 D 6m
32.75
0.0
0.00
MQ-52-72 D 6m
29.85
0.0
0.00
MQ-41 D 6m
32.74
0.0
0.00
MQ-21 6m
0.07
0.0
0.00
MQ-21 6m
0.07
0.0
0.00
(Design load)
Beam No.
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MQP-82
5.8300
0.0190
-0.5000
0.0000
0.5000
0.0100
77.00
MQW-S/2
-0.5000
0.0000
5.8100
0.0000
0.0000
0.0000
60.00
MQW-S/2
0.5000
0.0000
5.7900
0.0000
0.0000
0.0000
73.00
MQP-82
5.8140
-0.0190
0.5000
0.0000
-0.5000
-0.0100
77.00
MQP-45
0.0300
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0200
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQP-45
0.0300
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0200
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
(Design load)
Forces[kN]
Moments[kNm]
Node No.
Support No.
MQP-82
-0.5000
-0.0190
5.8300
0.0100
-0.5000
0.0000
MQP-82
-0.5000
-0.0190
5.8140
0.0100
-0.5000
0.0000
MQP-45
0.0000
0.0190
0.0240
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0190
0.0240
0.0000
0.0000
0.0000
Designation
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-41 D 6m
13.56
0.0
0.00
MQ-52-72 D 6m
29.68
0.0
0.00
MQ-41 D 6m
13.54
0.0
0.00
MQ-21 6m
0.07
0.0
0.00
MQ-21 6m
0.07
0.0
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
158
Contact:
Page:
9 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Beam No.
3
4
01-Mar-15
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MQP-82
5.8300
0.0190
0.1500
0.0000
-0.1500
0.0100
50.00
MQW-S/2
0.1500
0.0000
5.8100
0.0000
0.0000
0.0000
54.00
MQW-S/2
-0.1500
0.0000
5.7900
0.0000
0.0000
0.0000
50.00
MQP-82
5.8140
-0.0190
-0.1500
0.0000
0.1500
-0.0100
50.00
MQP-45
0.0300
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0200
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQP-45
0.0300
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0200
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
(Design load)
Support No.
4
5
7
Forces[kN]
Designation
Moments[kNm]
MQP-82
0.1500
-0.0190
5.8300
0.0100
0.1500
0.0000
MQP-82
0.1500
-0.0190
5.8140
0.0100
0.1500
0.0000
MQP-45
0.0000
0.0190
0.0240
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0190
0.0240
0.0000
0.0000
0.0000
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-41 D 6m
13.56
0.0
0.00
MQ-52-72 D 6m
29.68
0.0
0.00
MQ-41 D 6m
13.54
0.0
0.00
MQ-21 6m
0.07
0.0
0.00
MQ-21 6m
0.07
0.0
0.00
Beam No.
2
3
(Design load)
Designation
Forces[kN]
Moments[kNm]
Utilization[%]
MQP-82
5.8300
0.0190
-0.1500
0.0000
0.1500
0.0100
50.00
MQW-S/2
-0.1500
0.0000
5.8100
0.0000
0.0000
0.0000
50.00
MQW-S/2
0.1500
0.0000
5.7900
0.0000
0.0000
0.0000
54.00
MQP-82
5.8140
-0.0190
0.1500
0.0000
-0.1500
-0.0100
50.00
MQP-45
0.0300
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0200
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQP-45
0.0300
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0200
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
159
Contact:
Page:
10 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
Support No.
5
7
01-Mar-15
(Design load)
Designation
Forces[kN]
Moments[kNm]
MQP-82
-0.1500
-0.0190
5.8300
0.0100
-0.1500
0.0000
MQP-82
-0.1500
-0.0190
5.8140
0.0100
-0.1500
0.0000
MQP-45
0.0000
0.0190
0.0240
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0190
0.0240
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
160
Contact:
Page:
11 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Stress:
Beam No. 1: MQ-41 D 6m
Position
[m]
0.00
0.00
0.00
Actual
[kN/m]
80,390.000
2,160.000
80,390.000
Limit
[kN/m]
245,450.000
141,710.000
245,450.000
Utilization
[%]
32.75
1.52
32.75
[m]
0.23
0.00
0.23
Actual
[kN/m]
-109,090.000
-18,770.000
109,280.000
Limit
[kN/m]
245,450.000
141,710.000
245,450.000
Utilization
[%]
44.44
13.25
44.52
[m]
0.00
0.00
0.00
Actual
[kN/m]
80,340.000
-2,160.000
80,350.000
Limit
[kN/m]
245,450.000
141,710.000
245,450.000
Utilization
[%]
32.73
1.52
32.74
[m]
0.00
0.00
0.00
Actual
[kN/m]
300.000
0.000
300.000
Limit
[kN/m]
263,640.000
0.000
263,640.000
Utilization
[%]
0.11
0.00
0.11
[m]
0.00
0.00
0.00
Actual
[kN/m]
300.000
0.000
300.000
Limit
[kN/m]
263,640.000
0.000
263,640.000
Utilization
[%]
0.11
0.00
0.11
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
161
Contact:
Page:
12 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Displacement SLS1:
Beam No.
Value
Position [m]
u-X
u-Y
u-Z
[%]
Max. Displacement
1.00
0.0
0.0
0.0
1.58
Max. Displacement
0.35
0.0
0.0
0.3
9.45
Max. Displacement
1.00
0.0
0.0
0.0
1.57
Max. Displacement
0.57
0.0
0.0
0.0
0.83
Max. Displacement
0.57
0.0
0.0
0.0
0.82
Displacement [mm]
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Utilization
162
Contact:
Page:
13 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
(Design load)
Support load:
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
-0.0290
8.7350
0.0150
0.0000
0.0000
0.0000
-0.0290
8.7110
0.0150
0.0000
0.0000
0.0000
0.0290
0.0350
0.0000
0.0000
0.0000
0.0000
0.0290
0.0350
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.5000
-0.0190
5.8300
0.0100
0.5000
0.0000
0.5000
-0.0190
5.8140
0.0100
0.5000
0.0000
0.0000
0.0190
0.0240
0.0000
0.0000
0.0000
0.0000
0.0190
0.0240
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
-0.5000
-0.0190
5.8300
0.0100
-0.5000
0.0000
-0.5000
-0.0190
5.8140
0.0100
-0.5000
0.0000
0.0000
0.0190
0.0240
0.0000
0.0000
0.0000
0.0000
0.0190
0.0240
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
163
Contact:
Page:
14 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.1500
-0.0190
5.8300
0.0100
0.1500
0.0000
0.1500
-0.0190
5.8140
0.0100
0.1500
0.0000
0.0000
0.0190
0.0240
0.0000
0.0000
0.0000
0.0000
0.0190
0.0240
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
-0.1500
-0.0190
5.8300
0.0100
-0.1500
0.0000
-0.1500
-0.0190
5.8140
0.0100
-0.1500
0.0000
0.0000
0.0190
0.0240
0.0000
0.0000
0.0000
0.0000
0.0190
0.0240
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
164
Contact:
Page:
15 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
165
Contact:
Page:
1 of 11
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
166
Contact:
Page:
2 of 11
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Calculation factors:
Load type:
Design load
LC1: g
LC2: q
1.1
1.5
1.35
Load combinations:
ULS1 = 1.35*LC1+1*LC2
SLS1 = (LC1+LC2)/1.5
Maximum beam allowable deflection:
200
150
1.5
Local
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
167
Contact:
Page:
3 of 11
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Parts List:
Channels
Description
Item
Pos
Qty
Girder MI-90 3m
304798
7.3
0.77
Bracket MIC-C90-D-1500
267792
40.1
1.16
Item
Weight [kg]
Node No.
304805
8.1
2,3
Beam No.
Connections
Pos
Qty
Description
Connector MIC-90-L
Fixations
Pos
Qty
Description
Safety stud anchor HST M16X140/25
Item
Fixation text
371593
Accessories
Pos
Qty
Description
Girder end cap MIA-EC90
Item
432077
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
0.0
0.00
168
Contact:
Page:
4 of 11
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Static model:
Node
Hinged axis
Connection
No.
0.0000
0.0000
0.0000
0.0000
0.0000
1.0000
Y,Z
MIC-90-L
0.9000
0.0000
1.0000
Y,Z
MIC-90-L
0.9000
0.0000
0.0000
Building material
MIC-C90-D-1500
Concrete
MIC-C90-D-1500
Concrete
Beams
Beam
Channel
No.
Length
Rotation
Iy
Iz
[m]
[]
[cm]
[cm]
[cm]
[kN/m]
MIC-C90-D-1500
1.00
180
1,003
115
115
210,000,000.
MI-90 3m
0.90
1,003
115
115
210,000,000.
MIC-C90-D-1500
1.00
1,003
115
115
210,000,000.
Forces [kN]
Moments [kNm]
No.
No.
[m]
0.30
0.0000
1.2100
14.0500
0.0000
0.0000
0.0000
0.60
0.0000
1.2100
14.0500
0.0000
0.0000
0.0000
Load description
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
169
Contact:
Page:
5 of 11
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
No.
Date:
Type
Custom load
Custom load
Description
Size [mm]
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Span [m]
01-Mar-15
170
Contact:
Page:
6 of 11
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Calculation summary
1 Beams
(1) Connections
[1] Supports
Beams:
Designation
Beam No.
Deflection
Deflection
Stress
Torsion
Torsion
[mm]
[%]
[%]
[]
[%]
MIC-C90-D-1500
1.1
22.67
28.75
0.0
0.00
MI-90 3m
1.1
24.10
82.83
0.0
0.00
MIC-C90-D-1500
1.1
22.67
28.75
0.0
0.00
(Design load)
Beam No.
3
4
Forces[kN]
Designation
MIC-C90-D-
14.2040
MIC-90-L
0.0000
MIC-90-L
MIC-C90-D-
Support No.
Moments[kNm]
Utilization[%]
-1.2100
0.0000
0.0000
0.0000
-1.2100
69.00
-1.2100
14.1000
0.0000
0.0000
0.0000
72.00
0.0000
1.2100
-14.1000
0.0000
0.0000
0.0000
72.00
14.2040
1.2100
0.0000
0.0000
0.0000
1.2100
69.00
(Design load)
Designation
Forces[kN]
Moments[kNm]
MIC-C90-D-
0.0000
1.2100
14.2040
-1.2100
0.0000
0.0000
MIC-C90-D-
0.0000
1.2100
14.2040
-1.2100
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
171
Contact:
Page:
7 of 11
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Stress:
Beam No. 1: MIC-C90-D-1500
Position
[m]
0.00
0.00
0.00
Actual
[kN/m]
61,370.000
-2,790.000
61,410.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
28.73
2.27
28.75
[m]
0.34
0.00
0.30
Actual
[kN/m]
-175,910.000
-32,440.000
176,950.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
82.34
26.30
82.83
[m]
0.00
0.00
0.00
Actual
[kN/m]
61,370.000
2,790.000
61,410.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
28.73
2.27
28.75
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
172
Contact:
Page:
8 of 11
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Displacement:
Beam No.
Value
Position [m]
u-X
u-Y
u-Z
[%]
Max. Displacement
1.00
0.0
1.1
0.0
22.67
Max. Displacement
0.45
0.0
0.1
1.1
24.10
Max. Displacement
1.00
0.0
1.1
0.0
22.67
Displacement [mm]
Utilization
Displacement
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
173
Contact:
Page:
9 of 11
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
(Design load)
Support load:
Support
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
1.2100
14.2040
-1.2100
0.0000
0.0000
0.0000
1.2100
14.2040
-1.2100
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
174
Contact:
Page:
10 of 11
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Section load:
Beam
Value
Unit
Q-2
Q-3
M-2
M-3
Value
[kN] / [kNm]
14.2000
-1.2100
0.0000
0.0000
0.0000
-1.2100
Position
[m]
0.00
0.00
0.00
0.00
0.00
0.00
No.
1
01-Mar-15
Forces
N
Moments
Value
[kN] / [kNm]
0.0000
1.2100
14.1000
0.0000
4.2300
-0.3600
Position
[m]
0.00
0.00
0.00
0.00
0.34
0.30
Value
[kN] / [kNm]
14.2000
1.2100
0.0000
0.0000
0.0000
1.2100
Position
[m]
0.00
0.00
0.00
0.00
0.00
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
175
Contact:
Page:
11 of 11
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
176
Contact:
Page:
1 of 11
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
177
Contact:
Page:
2 of 11
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Calculation factors:
Load type:
Design load
LC1: g
LC2: q
1.1
1.5
1.35
Load combinations:
ULS1 = 1.35*LC1+1*LC2
SLS1 = (LC1+LC2)/1.5
Maximum beam allowable deflection:
200
150
1.5
Local
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
178
Contact:
Page:
3 of 11
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Parts List:
Channels
Description
Item
Pos
Qty
Girder MI-90 3m
304798
7.3
0.77
Bracket MIC-C90-D-1500
267792
40.1
1.16
Item
Weight [kg]
Node No.
304805
8.1
2,3
Beam No.
Connections
Pos
Qty
Description
Connector MIC-90-L
Fixations
Pos
Qty
Description
Safety stud anchor HST M16X140/25
Item
Fixation text
371593
Accessories
Pos
Qty
Description
Girder end cap MIA-EC90
Item
432077
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
0.0
0.00
179
Contact:
Page:
4 of 11
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Static model:
Node
Hinged axis
Connection
No.
0.0000
0.0000
0.0000
0.0000
0.0000
1.0000
Y,Z
MIC-90-L
0.9000
0.0000
1.0000
Y,Z
MIC-90-L
0.9000
0.0000
0.0000
Building material
MIC-C90-D-1500
Concrete
MIC-C90-D-1500
Concrete
Beams
Beam
Channel
No.
Length
Rotation
Iy
Iz
[m]
[]
[cm]
[cm]
[cm]
[kN/m]
MIC-C90-D-1500
1.00
180
1,003
115
115
210,000,000.
MI-90 3m
0.90
1,003
115
115
210,000,000.
MIC-C90-D-1500
1.00
1,003
115
115
210,000,000.
Forces [kN]
Moments [kNm]
No.
No.
[m]
0.30
1.2100
0.0000
14.0500
0.0000
0.0000
0.0000
0.60
1.2100
0.0000
14.0500
0.0000
0.0000
0.0000
Load description
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
180
Contact:
Page:
5 of 11
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
No.
Date:
Type
Custom load
Custom load
Description
Size [mm]
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Span [m]
01-Mar-15
181
Contact:
Page:
6 of 11
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Calculation summary
1 Beams
(1) Connections
[1] Supports
Beams:
Designation
Beam No.
Deflection
Deflection
Stress
Torsion
Torsion
[mm]
[%]
[%]
[]
[%]
MIC-C90-D-1500
1.1
22.67
28.75
0.0
0.00
MI-90 3m
1.1
24.10
78.55
0.0
0.00
MIC-C90-D-1500
1.1
22.67
28.75
0.0
0.00
(Design load)
Beam No.
3
4
Forces[kN]
Designation
MIC-C90-D-
14.2040
MIC-90-L
1.2100
MIC-90-L
MIC-C90-D-
Support No.
Moments[kNm]
Utilization[%]
0.0000
1.2100
0.0000
-1.2100
0.0000
69.00
0.0000
14.1000
0.0000
0.0000
0.0000
74.00
-1.2100
0.0000
-14.1000
0.0000
0.0000
0.0000
74.00
14.2040
0.0000
-1.2100
0.0000
1.2100
0.0000
69.00
(Design load)
Designation
Forces[kN]
Moments[kNm]
MIC-C90-D-
1.2100
0.0000
14.2040
0.0000
1.2100
0.0000
MIC-C90-D-
1.2100
0.0000
14.2040
0.0000
1.2100
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
182
Contact:
Page:
7 of 11
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Stress:
Beam No. 1: MIC-C90-D-1500
Position
[m]
0.00
0.00
0.00
Actual
[kN/m]
61,370.000
-2,790.000
61,410.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
28.73
2.27
28.75
[m]
0.30
0.00
0.30
Actual
[kN/m]
165,850.000
-32,560.000
167,800.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
77.63
26.40
78.55
[m]
0.00
0.00
0.00
Actual
[kN/m]
61,370.000
2,790.000
61,410.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
28.73
2.27
28.75
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
183
Contact:
Page:
8 of 11
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Displacement:
Beam No.
Value
Position [m]
u-X
u-Y
u-Z
[%]
Max. Displacement
1.00
1.1
0.0
0.0
22.67
Max. Displacement
0.45
0.0
0.0
1.1
24.10
Max. Displacement
1.00
1.1
0.0
0.0
22.67
Displacement [mm]
Utilization
Displacement
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
184
Contact:
Page:
9 of 11
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
(Design load)
Support load:
Support
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
1.2100
0.0000
14.2040
0.0000
1.2100
0.0000
1.2100
0.0000
14.2040
0.0000
1.2100
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
185
Contact:
Page:
10 of 11
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Section load:
Beam
Value
Unit
Q-2
Q-3
M-2
M-3
Value
[kN] / [kNm]
14.2000
0.0000
1.2100
0.0000
-1.2100
0.0000
Position
[m]
0.00
0.00
0.00
0.00
0.00
0.00
No.
1
01-Mar-15
Forces
N
Moments
Value
[kN] / [kNm]
1.2100
0.0000
14.1000
0.0000
4.2300
0.0000
Position
[m]
0.00
0.00
0.00
0.00
0.34
0.00
Value
[kN] / [kNm]
14.2000
0.0000
-1.2100
0.0000
1.2100
0.0000
Position
[m]
0.00
0.00
0.00
0.00
0.00
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
186
Contact:
Page:
11 of 11
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
187
Contact:
Page:
1 of 11
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
188
Contact:
Page:
2 of 11
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Calculation factors:
Load type:
Design load
LC1: g
LC2: q
1.1
1.5
1.35
Load combinations:
ULS1 = 1.35*LC1+1*LC2
SLS1 = (LC1+LC2)/1.5
Maximum beam allowable deflection:
200
150
1.5
Local
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
189
Contact:
Page:
3 of 11
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Parts List:
Channels
Description
Item
Pos
Qty
Girder MI-90 6m
304799
19.5
1.04
1,3
Girder MI-90 6m
304799
4.0
0.42
Item
Weight [kg]
Node No.
304827
15.7
1,4
Item
Weight [kg]
Node No.
304803
5.0
2,3
Beam No.
Structure connections
Pos
Qty
Description
Connector MIC-C90-D concrete
Connections
Pos
Qty
Description
Connector MIC-90-U
Fixations
Pos
Qty
Description
Safety stud anchor HST M16X140/25
Item
Fixation text
371593
Accessories
Pos
Qty
Description
Girder end cap MIA-EC90
Item
432077
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
0.0
0.00
190
Contact:
Page:
4 of 11
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Static model:
Node
Hinged axis
Connection
No.
0.0000
0.0000
0.0000
0.0000
0.0000
1.0000
Y,Z
MIC-90-U
0.5500
0.0000
1.0000
Y,Z
MIC-90-U
0.5500
0.0000
0.0000
Building material
MIC-C90-D
Concrete
MIC-C90-D
Concrete
Beams
Beam
Channel
No.
Length
Rotation
Iy
Iz
[m]
[]
[cm]
[cm]
[cm]
[kN/m]
MI-90 6m
1.00
180
1,003
115
115
210,000,000.
MI-90 6m
0.55
180
1,003
115
115
210,000,000.
MI-90 6m
1.00
1,003
115
115
210,000,000.
No.
Position
Forces [kN]
Moments [kNm]
[m]
0.27
0.0000
1.6240
18.8000
0.0000
0.0000
0.0000
Load description
No.
Type
Description
Size [mm]
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Span [m]
191
Contact:
Page:
5 of 11
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
No.
Date:
Type
Description
Size [mm]
Span [m]
01-Mar-15
Custom load
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
192
Contact:
Page:
6 of 11
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Calculation summary
1 Beams
(1) Connections
[1] Supports
Beams:
Designation
Beam No.
Deflection
Deflection
Stress
Torsion
Torsion
[mm]
[%]
[%]
[]
[%]
MI-90 6m
0.8
15.36
19.52
0.0
0.00
MI-90 6m
0.2
8.33
50.92
0.0
0.00
MI-90 6m
0.8
15.07
18.99
0.0
0.00
(Design load)
Beam No.
MIC-C90-D
MIC-90-U
Designation
Forces[kN]
Moments[kNm]
Utilization[%]
9.7060
0.8270
0.0000
0.0000
0.0000
0.8220
93.00
0.0000
-0.8300
9.6000
0.0000
0.0000
0.0000
53.00
MIC-90-U
0.0000
0.8000
-9.2600
0.0000
0.0000
0.0000
51.00
MIC-C90-D
9.3650
0.7970
0.0000
0.0000
0.0000
0.8020
90.00
Support No.
(Design load)
Designation
Forces[kN]
Moments[kNm]
MIC-C90-D
0.0000
0.8270
9.7060
-0.8220
0.0000
0.0000
MIC-C90-D
0.0000
0.7970
9.3650
-0.8020
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
193
Contact:
Page:
7 of 11
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Stress:
Beam No. 1: MI-90 6m
Position
[m]
0.00
0.00
0.00
Actual
[kN/m]
41,680.000
-1,920.000
41,700.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
19.51
1.55
19.52
[m]
0.27
0.00
0.27
Actual
[kN/m]
107,700.000
22,080.000
108,770.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
50.41
17.90
50.92
[m]
0.00
0.00
0.00
Actual
[kN/m]
40,550.000
1,850.000
40,560.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
18.98
1.50
18.99
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
194
Contact:
Page:
8 of 11
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Displacement:
Beam No.
Value
Position [m]
u-X
u-Y
u-Z
[%]
Max. Displacement
1.00
0.0
0.8
0.0
15.36
Max. Displacement
0.28
0.0
0.0
0.2
8.33
Max. Displacement
1.00
0.0
0.8
0.0
15.07
Displacement [mm]
Utilization
Displacement
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
195
Contact:
Page:
9 of 11
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
(Design load)
Support load:
Support
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
0.8270
9.7060
-0.8220
0.0000
0.0000
0.0000
0.7970
9.3650
-0.8020
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
196
Contact:
Page:
10 of 11
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Section load:
Beam
Value
Unit
Q-2
Q-3
M-2
M-3
Value
[kN] / [kNm]
9.7100
-0.8300
0.0000
0.0000
0.0000
-0.8200
Position
[m]
0.00
0.00
0.00
0.00
0.00
0.00
No.
1
01-Mar-15
Forces
N
Moments
Value
[kN] / [kNm]
0.0000
-0.8300
-9.6000
0.0000
-2.5900
0.2200
Position
[m]
0.00
0.00
0.00
0.00
0.27
0.27
Value
[kN] / [kNm]
9.3600
0.8000
0.0000
0.0000
0.0000
0.8000
Position
[m]
0.00
0.00
0.00
0.00
0.00
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
197
Contact:
Page:
11 of 11
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
198
Contact:
Page:
1 of 11
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
199
Contact:
Page:
2 of 11
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Calculation factors:
Load type:
Design load
LC1: g
LC2: q
1.1
1.5
1.35
Load combinations:
ULS1 = 1.35*LC1+1*LC2
SLS1 = (LC1+LC2)/1.5
Maximum beam allowable deflection:
200
150
1.5
Local
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
200
Contact:
Page:
3 of 11
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Parts List:
Channels
Description
Item
Pos
Qty
Girder MI-90 6m
304799
19.5
1.04
1,3
Girder MI-90 6m
304799
4.0
0.42
Item
Weight [kg]
Node No.
304827
15.7
1,4
Item
Weight [kg]
Node No.
304803
5.0
2,3
Beam No.
Structure connections
Pos
Qty
Description
Connector MIC-C90-D concrete
Connections
Pos
Qty
Description
Connector MIC-90-U
Fixations
Pos
Qty
Description
Safety stud anchor HST M16X140/25
Item
Fixation text
371593
Accessories
Pos
Qty
Description
Girder end cap MIA-EC90
Item
432077
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
0.0
0.00
201
Contact:
Page:
4 of 11
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Static model:
Node
Hinged axis
Connection
No.
0.0000
0.0000
0.0000
0.0000
0.0000
1.0000
Y,Z
MIC-90-U
0.5500
0.0000
1.0000
Y,Z
MIC-90-U
0.5500
0.0000
0.0000
Building material
MIC-C90-D
Concrete
MIC-C90-D
Concrete
Beams
Beam
Channel
No.
Length
Rotation
Iy
Iz
[m]
[]
[cm]
[cm]
[cm]
[kN/m]
MI-90 6m
1.00
180
1,003
115
115
210,000,000.
MI-90 6m
0.55
180
1,003
115
115
210,000,000.
MI-90 6m
1.00
1,003
115
115
210,000,000.
No.
Position
Forces [kN]
Moments [kNm]
[m]
0.27
1.6240
0.0000
18.8000
0.0000
0.0000
0.0000
Load description
No.
Type
Description
Size [mm]
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Span [m]
202
Contact:
Page:
5 of 11
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
No.
Date:
Type
Description
Size [mm]
Span [m]
01-Mar-15
Custom load
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
203
Contact:
Page:
6 of 11
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Calculation summary
1 Beams
(1) Connections
[1] Supports
Beams:
Designation
Beam No.
Deflection
Deflection
Stress
Torsion
Torsion
[mm]
[%]
[%]
[]
[%]
MI-90 6m
0.8
15.21
19.34
0.0
0.00
MI-90 6m
0.2
8.33
48.37
0.0
0.00
MI-90 6m
0.8
15.21
19.18
0.0
0.00
(Design load)
Beam No.
3
4
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MIC-C90-D
9.7060
0.0000
-0.8120
0.0000
0.8120
0.0000
92.00
MIC-90-U
0.8100
0.0000
9.6000
0.0000
0.0000
0.0000
78.00
MIC-90-U
-0.8100
0.0000
-9.2600
0.0000
0.0000
0.0000
51.00
MIC-C90-D
9.3650
0.0000
-0.8120
0.0000
0.8120
0.0000
91.00
Support No.
(Design load)
Designation
Forces[kN]
Moments[kNm]
MIC-C90-D
0.8120
0.0000
9.7060
0.0000
0.8120
0.0000
MIC-C90-D
0.8120
0.0000
9.3650
0.0000
0.8120
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
204
Contact:
Page:
7 of 11
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Stress:
Beam No. 1: MI-90 6m
Position
[m]
0.00
0.00
0.00
Actual
[kN/m]
41,290.000
-1,870.000
41,310.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
19.33
1.52
19.34
[m]
0.27
0.00
0.27
Actual
[kN/m]
101,860.000
22,170.000
103,330.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
47.68
17.97
48.37
[m]
0.00
0.00
0.00
Actual
[kN/m]
40,940.000
1,870.000
40,970.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
19.16
1.52
19.18
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
205
Contact:
Page:
8 of 11
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Displacement:
Beam No.
Value
Position [m]
u-X
u-Y
u-Z
[%]
Max. Displacement
1.00
0.8
0.0
0.0
15.21
Max. Displacement
0.28
0.0
0.0
0.2
8.33
Max. Displacement
1.00
0.8
0.0
0.0
15.21
Displacement [mm]
Utilization
Displacement
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
206
Contact:
Page:
9 of 11
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
(Design load)
Support load:
Support
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.8120
0.0000
9.7060
0.0000
0.8120
0.0000
0.8120
0.0000
9.3650
0.0000
0.8120
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
207
Contact:
Page:
10 of 11
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Section load:
Beam
Value
Unit
Q-2
Q-3
M-2
M-3
Value
[kN] / [kNm]
9.7100
0.0000
0.8100
0.0000
-0.8100
0.0000
Position
[m]
0.00
0.00
0.00
0.00
0.00
0.00
No.
1
01-Mar-15
Forces
N
Moments
Value
[kN] / [kNm]
0.8100
0.0000
-9.6000
0.0000
-2.5900
0.0000
Position
[m]
0.00
0.00
0.00
0.00
0.27
0.00
Value
[kN] / [kNm]
9.3600
0.0000
-0.8100
0.0000
0.8100
0.0000
Position
[m]
0.00
0.00
0.00
0.00
0.00
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
208
Contact:
Page:
11 of 11
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
209
Contact:
Page:
1 of 11
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
10-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
210
Contact:
Page:
2 of 11
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
10-Mar-15
Calculation factors:
Load type:
Design load
LC1: g
LC2: q
1.1
1.5
1.35
Load combinations:
ULS1 = 1.35*LC1+1*LC2
SLS1 = (LC1+LC2)/1.5
Maximum beam allowable deflection:
200
150
1.5
Local
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
211
Contact:
Page:
3 of 11
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
10-Mar-15
Parts List:
Channels
Description
Item
Pos
Qty
Girder MI-120 6m
304801
7.6
0.60
Bracket MIC-C90-D-1500
267792
40.1
1.11
Item
Weight [kg]
Node No.
2048107
15.2
2,3
Beam No.
Connections
Pos
Qty
Description
Connector MIC-90-LH
Fixations
Description
Item
Pos
Qty
382897
371593
Fixation text
Accessories
Description
Item
Pos
Qty
432077
0.0
0.00
304887
1.4
0.00
305707
0.4
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
212
Contact:
Page:
4 of 11
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
10-Mar-15
Static model:
Node
Hinged axis
Connection
No.
0.0000
0.0000
0.0000
0.0000
0.0000
1.0000
Y,Z
MIC 90-LH
0.7000
0.0000
1.0000
Y,Z
MIC 90-LH
0.7000
0.0000
0.0000
Building material
MIC-C90-D-1500
Concrete
MIC-C90-D-1500
Concrete
Beams
Beam
Channel
No.
Length
Rotation
Iy
Iz
[m]
[]
[cm]
[cm]
[cm]
[kN/m]
MIC-C90-D-1500
1.00
180
1,003
115
115
210,000,000.
MI-120 6m
0.70
180
1,376
266
174
210,000,000.
MIC-C90-D-1500
1.00
1,003
115
115
210,000,000.
No.
Position
Forces [kN]
Moments [kNm]
[m]
0.35
0.0000
3.3588
23.3250
0.0000
0.0000
0.0000
Load description
No.
Type
Description
Size [mm]
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Span [m]
213
Contact:
Page:
5 of 11
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
No.
Date:
Type
Description
Size [mm]
Span [m]
10-Mar-15
Custom load
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
214
Contact:
Page:
6 of 11
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
10-Mar-15
Calculation summary
1 Beams
(1) Connections
[1] Supports
Beams:
Designation
Beam No.
Deflection
Deflection
Stress
Torsion
Torsion
[mm]
[%]
[%]
[]
[%]
MIC-C90-D-1500
1.6
31.46
36.23
0.0
0.00
MI-120 6m
0.2
7.05
48.93
0.0
0.00
MIC-C90-D-1500
1.6
31.46
36.23
0.0
0.00
(Design load)
Beam No.
Forces[kN]
Designation
Moments[kNm]
Z
Utilization[%]
MIC-C90-D-
11.8200
-1.6790
0.0000
0.0000
0.0000
-1.6790
78.00
MIC 90-LH
0.0000
-1.6800
-11.7100
0.0000
0.0000
0.0000
64.00
MIC 90-LH
0.0000
1.6800
-11.7100
0.0000
0.0000
0.0000
64.00
MIC-C90-D-
11.8200
1.6790
0.0000
0.0000
0.0000
1.6790
78.00
Support No.
(Design load)
Designation
Forces[kN]
Moments[kNm]
MIC-C90-D-
0.0000
1.6790
11.8200
-1.6790
0.0000
0.0000
MIC-C90-D-
0.0000
1.6790
11.8200
-1.6790
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
215
Contact:
Page:
7 of 11
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
10-Mar-15
Stress:
Beam No. 1: MIC-C90-D-1500
Position
[m]
0.00
0.00
0.00
Actual
[kN/m]
77,340.000
-3,880.000
77,390.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
36.20
3.15
36.23
[m]
0.35
0.00
0.35
Actual
[kN/m]
-104,200.000
17,490.000
104,540.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
48.77
14.18
48.93
[m]
0.00
0.00
0.00
Actual
[kN/m]
77,340.000
3,880.000
77,390.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
36.20
3.15
36.23
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
216
Contact:
Page:
8 of 11
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
10-Mar-15
Displacement:
Beam No.
Value
Position [m]
u-X
u-Y
u-Z
[%]
Max. Displacement
1.00
0.0
1.6
0.0
31.46
Max. Displacement
0.35
0.0
0.1
0.2
7.05
Max. Displacement
1.00
0.0
1.6
0.0
31.46
Displacement [mm]
Utilization
Displacement
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
217
Contact:
Page:
9 of 11
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
10-Mar-15
(Design load)
Support load:
Support
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
1.6790
11.8200
-1.6790
0.0000
0.0000
0.0000
1.6790
11.8200
-1.6790
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
218
Contact:
Page:
10 of 11
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Section load:
Beam
Value
Unit
Q-2
Q-3
M-2
M-3
Value
[kN] / [kNm]
11.8200
-1.6800
0.0000
0.0000
0.0000
-1.6800
Position
[m]
0.00
0.00
0.00
0.00
0.00
0.00
No.
1
10-Mar-15
Forces
N
Moments
Value
[kN] / [kNm]
0.0000
-1.6800
-11.7100
0.0000
-4.0900
0.5900
Position
[m]
0.00
0.00
0.00
0.00
0.35
0.35
Value
[kN] / [kNm]
11.8200
1.6800
0.0000
0.0000
0.0000
1.6800
Position
[m]
0.00
0.00
0.00
0.00
0.00
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
219
Contact:
Page:
11 of 11
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
10-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
220
Contact:
Page:
1 of 11
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
10-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
221
Contact:
Page:
2 of 11
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
10-Mar-15
Calculation factors:
Load type:
Design load
LC1: g
LC2: q
1.1
1.5
1.35
Load combinations:
ULS1 = 1.35*LC1+1*LC2
SLS1 = (LC1+LC2)/1.5
Maximum beam allowable deflection:
200
150
1.5
Local
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
222
Contact:
Page:
3 of 11
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
10-Mar-15
Parts List:
Channels
Description
Item
Pos
Qty
Girder MI-120 6m
304801
7.6
0.60
Bracket MIC-C90-D-1500
267792
40.1
1.11
Item
Weight [kg]
Node No.
2048107
15.2
2,3
Beam No.
Connections
Pos
Qty
Description
Connector MIC-90-LH
Fixations
Description
Item
Pos
Qty
382897
371593
Fixation text
Accessories
Description
Item
Pos
Qty
432077
0.0
0.00
304887
1.4
0.00
305707
0.4
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
223
Contact:
Page:
4 of 11
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
10-Mar-15
Static model:
Node
Hinged axis
Connection
No.
0.0000
0.0000
0.0000
0.0000
0.0000
1.0000
Y,Z
MIC 90-LH
0.7000
0.0000
1.0000
Y,Z
MIC 90-LH
0.7000
0.0000
0.0000
Building material
MIC-C90-D-1500
Concrete
MIC-C90-D-1500
Concrete
Beams
Beam
Channel
No.
Length
Rotation
Iy
Iz
[m]
[]
[cm]
[cm]
[cm]
[kN/m]
MIC-C90-D-1500
1.00
180
1,003
115
115
210,000,000.
MI-120 6m
0.70
180
1,376
266
174
210,000,000.
MIC-C90-D-1500
1.00
1,003
115
115
210,000,000.
No.
Position
Forces [kN]
Moments [kNm]
[m]
0.35
3.3588
0.0000
23.3250
0.0000
0.0000
0.0000
Load description
No.
Type
Description
Size [mm]
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Span [m]
224
Contact:
Page:
5 of 11
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
No.
Date:
Type
Description
Size [mm]
Span [m]
10-Mar-15
Custom load
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
225
Contact:
Page:
6 of 11
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
10-Mar-15
Calculation summary
1 Beams
(1) Connections
[1] Supports
Beams:
Designation
Beam No.
Deflection
Deflection
Stress
Torsion
Torsion
[mm]
[%]
[%]
[]
[%]
MIC-C90-D-1500
1.6
31.46
36.23
0.0
0.00
MI-120 6m
0.2
7.05
44.22
0.0
0.00
MIC-C90-D-1500
1.6
31.46
36.23
0.0
0.00
(Design load)
Beam No.
Forces[kN]
Designation
Moments[kNm]
Z
Utilization[%]
MIC-C90-D-
11.8200
0.0000
1.6800
0.0000
-1.6790
0.0000
78.00
MIC 90-LH
1.6800
0.0000
-11.7100
0.0000
0.0000
0.0000
20.00
MIC 90-LH
-1.6800
0.0000
-11.7100
0.0000
0.0000
0.0000
20.00
MIC-C90-D-
11.8200
0.0000
-1.6790
0.0000
1.6790
0.0000
78.00
Support No.
(Design load)
Designation
Forces[kN]
Moments[kNm]
MIC-C90-D-
1.6800
0.0000
11.8200
0.0000
1.6790
0.0000
MIC-C90-D-
1.6790
0.0000
11.8200
0.0000
1.6790
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
226
Contact:
Page:
7 of 11
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
10-Mar-15
Stress:
Beam No. 1: MIC-C90-D-1500
Position
[m]
0.00
0.00
0.00
Actual
[kN/m]
77,340.000
-3,880.000
77,390.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
36.20
3.15
36.23
[m]
0.35
0.00
0.35
Actual
[kN/m]
93,650.000
17,610.000
94,460.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
43.84
14.28
44.22
[m]
0.00
0.00
0.00
Actual
[kN/m]
77,340.000
3,880.000
77,390.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
36.20
3.15
36.23
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
227
Contact:
Page:
8 of 11
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
10-Mar-15
Displacement:
Beam No.
Value
Position [m]
u-X
u-Y
u-Z
[%]
Max. Displacement
1.00
1.6
0.0
0.0
31.46
Max. Displacement
0.35
0.0
0.0
0.2
7.05
Max. Displacement
1.00
1.6
0.0
0.0
31.46
Displacement [mm]
Utilization
Displacement
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
228
Contact:
Page:
9 of 11
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
10-Mar-15
(Design load)
Support load:
Support
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
1.6800
0.0000
11.8200
0.0000
1.6790
0.0000
1.6790
0.0000
11.8200
0.0000
1.6790
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
229
Contact:
Page:
10 of 11
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Section load:
Beam
Value
Unit
Q-2
Q-3
M-2
M-3
Value
[kN] / [kNm]
11.8200
0.0000
1.6800
0.0000
-1.6800
0.0000
Position
[m]
0.00
0.00
0.00
0.00
0.00
0.00
No.
1
10-Mar-15
Forces
N
Moments
Value
[kN] / [kNm]
1.6800
0.0000
-11.7100
0.0000
-4.0900
0.0000
Position
[m]
0.00
0.00
0.00
0.00
0.35
0.00
Value
[kN] / [kNm]
11.8200
0.0000
-1.6800
0.0000
1.6800
0.0000
Position
[m]
0.00
0.00
0.00
0.00
0.00
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
230
Contact:
Page:
11 of 11
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
10-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
231
Seismic support
(Suspension 1.5m)
www.hilti.sa
sa.tso@hilti.com
IS-HN-D1278-2015
232
Contact:
Page:
1 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
233
Contact:
Page:
2 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Calculation factors:
Load type:
Seismic
LC1: g
LC2: q
LC3: Ex
Earthquake in X-direction
LC4: Ey
Earthquake in Y-direction
1.1
1.5
1.35
Load combinations:
ULS1 = 1.35*LC1+1.5*LC2
SLS1 = 1*LC1+1*LC2
ULS2 = 1*LC1+1*LC2+1*LC4
ULS3 = 1*LC1+1*LC2-1*LC4
ULS4 = 1*LC1+1*LC2+0.3*LC4
ULS5 = 1*LC1+1*LC2-0.3*LC4
Maximum beam allowable deflection:
200
150
1.5
Local
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
234
Contact:
Page:
3 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Parts List:
Channels
Pos
Qty
2
3
Description
Item
369585
1.6
369604
369598
Beam No.
0.59
4,5
12.4
1.52
1,3
1.1
0.39
Item
Weight [kg]
Node No.
Connections
Description
Pos
Qty
369660
0.8
6,8
369649
0.7
5,7
369652
3.8
1,4
369658
0.5
2,3
Fixations
Description
Item
Pos
Qty
24
369623
371587
Fixation text
Accessories
Pos
Qty
10
Description
Channel end cap MQZ-E41
Item
369685
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
0.0
0.00
235
Contact:
Page:
4 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Static model:
Node
Hinged axis
Connection
No.
0.0000
0.0000
0.0000
0.0000
0.0000
1.5000
Y,Z
MQW-4
0.4700
0.0000
1.5000
Y,Z
MQW-4
0.4700
0.0000
0.0000
0.0000
-0.5000
0.0000
X,Y,Z
0.0000
0.0000
0.5000
X,Z
0.4700
-0.5000
0.0000
X,Y,Z
0.4700
0.0000
0.5000
X,Z
MQP-82
Building material
Concrete
MQP-82
Concrete
MQP-45
Concrete
MQW-8/45 r
MQP-45
Concrete
MQW-8/45 r
Beams
Beam
Channel
No.
Length
Rotation
Iy
Iz
[m]
[]
[cm]
[cm]
[cm]
[kN/m]
MQ-41 D 6m
1.50
180
4.903
30.6875
14.6682
210,000,000.
MQ-52 6m
0.47
180
3.521
11.4066
10.7943
210,000,000.
MQ-41 D 6m
1.50
4.903
30.6875
14.6682
210,000,000.
MQ-21 6m
0.71
1.653
0.9174
4.3914
210,000,000.
MQ-21 6m
0.71
1.653
0.9174
4.3914
210,000,000.
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
236
Contact:
Page:
5 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Point loads
No.
No.
1
2
Position
Forces [kN]
Moments [kNm]
Forces [kN]
[m]
Ex
Ey
0.15
0.0000
0.0000
0.8750
0.0000
0.0000
0.0000
0.0000
0.1000
0.32
0.0000
0.0000
0.8750
0.0000
0.0000
0.0000
0.0000
0.1000
Load description
No.
Type
Custom load
Custom load
Description
Size [mm]
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Span [m]
237
Contact:
Page:
6 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Calculation summary
1 Beams
(1) Connections
[1] Supports
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-41 D 6m
1.16
0.0
0.00
MQ-52 6m
18.45
0.0
0.00
MQ-41 D 6m
1.16
0.0
0.00
MQ-21 6m
0.02
0.0
0.00
MQ-21 6m
0.02
0.0
0.00
Beam No.
(Design load)
Designation
Forces[kN]
X
Moments[kNm]
Z
Utilization[%]
MQP-82
1.4010
0.0050
0.0000
0.0000
0.0000
0.0020
9.00
MQW-4
0.0000
0.0000
-1.3200
0.0000
0.0000
0.0000
25.00
MQW-4
0.0000
0.0000
-1.3200
0.0000
0.0000
0.0000
25.00
MQP-82
1.4010
-0.0050
0.0000
0.0000
0.0000
-0.0020
9.00
MQP-45
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0000
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQP-45
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0000
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
238
Contact:
Page:
7 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Support No.
5
7
01-Mar-15
Forces[kN]
Designation
Moments[kNm]
MQP-82
0.0000
-0.0050
1.4010
0.0020
0.0000
0.0000
MQP-82
0.0000
-0.0050
1.4010
0.0020
0.0000
0.0000
MQP-45
0.0000
0.0050
0.0110
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0050
0.0110
0.0000
0.0000
0.0000
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-41 D 6m
6.51
0.0
0.00
MQ-52 6m
12.62
0.0
0.00
MQ-41 D 6m
6.51
0.0
0.00
MQ-21 6m
1.24
0.0
0.00
MQ-21 6m
1.24
0.0
0.00
(Design load)
Beam No.
2
3
Designation
Forces[kN]
Moments[kNm]
Utilization[%]
MQP-82
0.5660
0.2780
0.0000
0.0000
0.0000
0.0390
37.00
MQW-4
0.0000
0.1000
-0.8800
0.0000
0.0000
0.0000
33.00
MQW-4
0.0000
0.1000
-0.8800
0.0000
0.0000
0.0000
33.00
MQP-82
0.5660
-0.2780
0.0000
0.0000
0.0000
-0.0390
37.00
MQP-45
0.5400
0.0000
0.0000
0.0000
0.0000
0.0000
8.00
MQW-8/45 r
0.5300
0.0000
0.0000
0.0000
0.0000
0.0000
13.00
MQP-45
0.5400
0.0000
0.0000
0.0000
0.0000
0.0000
8.00
MQW-8/45 r
0.5300
0.0000
0.0000
0.0000
0.0000
0.0000
13.00
Support No.
5
7
(Design load)
Designation
Forces[kN]
Moments[kNm]
MQP-82
0.0000
-0.2780
0.5660
0.0390
0.0000
0.0000
MQP-82
0.0000
-0.2780
0.5660
0.0390
0.0000
0.0000
MQP-45
0.0000
0.3780
0.3830
0.0000
0.0000
0.0000
MQP-45
0.0000
0.3780
0.3830
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
239
Contact:
Page:
8 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Designation
Torsion
Stress
Torsion
[%]
[]
[%]
MQ-41 D 6m
6.90
0.0
0.00
MQ-52 6m
12.62
0.0
0.00
MQ-41 D 6m
6.90
0.0
0.00
MQ-21 6m
1.22
0.0
0.00
MQ-21 6m
1.22
0.0
0.00
(Design load)
Beam No.
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MQP-82
1.3160
-0.2720
0.0000
0.0000
0.0000
-0.0360
34.00
MQW-4
0.0000
-0.1000
-0.8800
0.0000
0.0000
0.0000
33.00
MQW-4
0.0000
-0.1000
-0.8800
0.0000
0.0000
0.0000
33.00
MQP-82
1.3160
0.2720
0.0000
0.0000
0.0000
0.0360
34.00
MQP-45
-0.5200
0.0000
0.0000
0.0000
0.0000
0.0000
5.00
MQW-8/45 r
-0.5300
0.0000
0.0000
0.0000
0.0000
0.0000
13.00
MQP-45
-0.5200
0.0000
0.0000
0.0000
0.0000
0.0000
5.00
MQW-8/45 r
-0.5300
0.0000
0.0000
0.0000
0.0000
0.0000
13.00
(Design load)
Forces[kN]
Moments[kNm]
Node No.
Support No.
MQP-82
0.0000
0.2720
1.3160
-0.0360
0.0000
0.0000
MQP-82
0.0000
0.2720
1.3160
-0.0360
0.0000
0.0000
MQP-45
0.0000
-0.3720
-0.3670
0.0000
0.0000
0.0000
MQP-45
0.0000
-0.3720
-0.3670
0.0000
0.0000
0.0000
Designation
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-41 D 6m
2.49
0.0
0.00
MQ-52 6m
12.00
0.0
0.00
MQ-41 D 6m
2.49
0.0
0.00
MQ-21 6m
0.39
0.0
0.00
MQ-21 6m
0.39
0.0
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
240
Contact:
Page:
9 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Beam No.
01-Mar-15
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MQP-82
0.8280
0.0860
0.0000
0.0000
0.0000
0.0130
12.00
MQW-4
0.0000
0.0300
-0.8800
0.0000
0.0000
0.0000
22.00
MQW-4
0.0000
0.0300
-0.8800
0.0000
0.0000
0.0000
22.00
MQP-82
0.8280
-0.0860
0.0000
0.0000
0.0000
-0.0130
12.00
MQP-45
0.1700
0.0000
0.0000
0.0000
0.0000
0.0000
2.00
MQW-8/45 r
0.1600
0.0000
0.0000
0.0000
0.0000
0.0000
4.00
MQP-45
0.1700
0.0000
0.0000
0.0000
0.0000
0.0000
2.00
MQW-8/45 r
0.1600
0.0000
0.0000
0.0000
0.0000
0.0000
4.00
(Design load)
Support No.
4
5
7
Forces[kN]
Designation
Moments[kNm]
MQP-82
0.0000
-0.0860
0.8280
0.0130
0.0000
0.0000
MQP-82
0.0000
-0.0860
0.8280
0.0130
0.0000
0.0000
MQP-45
0.0000
0.1160
0.1200
0.0000
0.0000
0.0000
MQP-45
0.0000
0.1160
0.1200
0.0000
0.0000
0.0000
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-41 D 6m
2.61
0.0
0.00
MQ-52 6m
12.00
0.0
0.00
MQ-41 D 6m
2.61
0.0
0.00
MQ-21 6m
0.37
0.0
0.00
MQ-21 6m
0.37
0.0
0.00
Beam No.
2
3
(Design load)
Designation
Forces[kN]
Moments[kNm]
Utilization[%]
MQP-82
1.0530
-0.0790
0.0000
0.0000
0.0000
-0.0100
10.00
MQW-4
0.0000
-0.0300
-0.8800
0.0000
0.0000
0.0000
22.00
MQW-4
0.0000
-0.0300
-0.8800
0.0000
0.0000
0.0000
22.00
MQP-82
1.0530
0.0790
0.0000
0.0000
0.0000
0.0100
10.00
MQP-45
-0.1500
0.0000
0.0000
0.0000
0.0000
0.0000
2.00
MQW-8/45 r
-0.1600
0.0000
0.0000
0.0000
0.0000
0.0000
4.00
MQP-45
-0.1500
0.0000
0.0000
0.0000
0.0000
0.0000
2.00
MQW-8/45 r
-0.1600
0.0000
0.0000
0.0000
0.0000
0.0000
4.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
241
Contact:
Page:
10 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
Support No.
5
7
01-Mar-15
(Design load)
Designation
Forces[kN]
Moments[kNm]
MQP-82
0.0000
0.0790
1.0530
-0.0100
0.0000
0.0000
MQP-82
0.0000
0.0790
1.0530
-0.0100
0.0000
0.0000
MQP-45
0.0000
-0.1090
-0.1050
0.0000
0.0000
0.0000
MQP-45
0.0000
-0.1090
-0.1050
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
242
Contact:
Page:
11 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Stress:
Beam No. 1: MQ-41 D 6m
Position
[m]
0.50
0.00
0.50
Actual
[kN/m]
16,730.000
1,980.000
16,950.000
Limit
[kN/m]
245,450.000
141,710.000
245,450.000
Utilization
[%]
6.82
1.40
6.90
[m]
0.15
0.00
0.15
Actual
[kN/m]
-46,760.000
-7,150.000
46,960.000
Limit
[kN/m]
254,550.000
146,960.000
254,550.000
Utilization
[%]
18.37
4.86
18.45
[m]
0.50
0.00
0.50
Actual
[kN/m]
16,730.000
-1,980.000
16,950.000
Limit
[kN/m]
245,450.000
141,710.000
245,450.000
Utilization
[%]
6.82
1.40
6.90
[m]
0.00
0.00
0.00
Actual
[kN/m]
3,270.000
0.000
3,270.000
Limit
[kN/m]
263,640.000
0.000
263,640.000
Utilization
[%]
1.24
0.00
1.24
[m]
0.00
0.00
0.00
Actual
[kN/m]
3,270.000
0.000
3,270.000
Limit
[kN/m]
263,640.000
0.000
263,640.000
Utilization
[%]
1.24
0.00
1.24
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
243
Contact:
Page:
12 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Displacement SLS1:
Beam No.
Value
Position [m]
u-X
u-Y
u-Z
[%]
Max. Displacement
1.50
0.0
0.0
0.0
0.25
Max. Displacement
0.23
0.0
0.0
0.1
5.93
Max. Displacement
1.50
0.0
0.0
0.0
0.25
Max. Displacement
0.39
0.0
0.0
0.0
0.38
Max. Displacement
0.39
0.0
0.0
0.0
0.38
Displacement [mm]
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Utilization
244
Contact:
Page:
13 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
(Design load)
Support load:
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
-0.0050
1.4010
0.0020
0.0000
0.0000
0.0000
-0.0050
1.4010
0.0020
0.0000
0.0000
0.0000
0.0050
0.0110
0.0000
0.0000
0.0000
0.0000
0.0050
0.0110
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
-0.2780
0.5660
0.0390
0.0000
0.0000
0.0000
-0.2780
0.5660
0.0390
0.0000
0.0000
0.0000
0.3780
0.3830
0.0000
0.0000
0.0000
0.0000
0.3780
0.3830
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
0.2720
1.3160
-0.0360
0.0000
0.0000
0.0000
0.2720
1.3160
-0.0360
0.0000
0.0000
0.0000
-0.3720
-0.3670
0.0000
0.0000
0.0000
0.0000
-0.3720
-0.3670
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
245
Contact:
Page:
14 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
-0.0860
0.8280
0.0130
0.0000
0.0000
0.0000
-0.0860
0.8280
0.0130
0.0000
0.0000
0.0000
0.1160
0.1200
0.0000
0.0000
0.0000
0.0000
0.1160
0.1200
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
0.0790
1.0530
-0.0100
0.0000
0.0000
0.0000
0.0790
1.0530
-0.0100
0.0000
0.0000
0.0000
-0.1090
-0.1050
0.0000
0.0000
0.0000
0.0000
-0.1090
-0.1050
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
246
Contact:
Page:
15 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
247
Contact:
Page:
1 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
248
Contact:
Page:
2 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Calculation factors:
Load type:
Seismic
LC1: g
LC2: q
LC3: Ex
Earthquake in X-direction
LC4: Ey
Earthquake in Y-direction
1.1
1.5
1.35
Load combinations:
ULS1 = 1.35*LC1+1.5*LC2
SLS1 = 1*LC1+1*LC2
ULS2 = 1*LC1+1*LC2+1*LC3
ULS3 = 1*LC1+1*LC2-1*LC3
ULS4 = 1*LC1+1*LC2+0.3*LC3
ULS5 = 1*LC1+1*LC2-0.3*LC3
Maximum beam allowable deflection:
200
150
1.5
Local
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
249
Contact:
Page:
3 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Parts List:
Channels
Pos
Qty
2
3
Description
Item
369585
1.6
369604
369598
Beam No.
0.59
4,5
12.4
1.52
1,3
1.1
0.39
Item
Weight [kg]
Node No.
Connections
Description
Pos
Qty
369660
0.8
6,8
369649
0.7
5,7
369652
3.8
1,4
369658
0.5
2,3
Fixations
Description
Item
Pos
Qty
24
369623
371587
Fixation text
Accessories
Pos
Qty
10
Description
Channel end cap MQZ-E41
Item
369685
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
0.0
0.00
250
Contact:
Page:
4 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Static model:
Node
Hinged axis
Connection
No.
0.0000
0.0000
0.0000
0.0000
0.0000
1.5000
Y,Z
MQW-4
0.4700
0.0000
1.5000
Y,Z
MQW-4
0.4700
0.0000
0.0000
0.0000
-0.5000
0.0000
X,Y,Z
0.0000
0.0000
0.5000
X,Z
0.4700
-0.5000
0.0000
X,Y,Z
0.4700
0.0000
0.5000
X,Z
MQP-82
Building material
Concrete
MQP-82
Concrete
MQP-45
Concrete
MQW-8/45 r
MQP-45
Concrete
MQW-8/45 r
Beams
Beam
Channel
No.
Length
Rotation
Iy
Iz
[m]
[]
[cm]
[cm]
[cm]
[kN/m]
MQ-41 D 6m
1.50
180
4.903
30.6875
14.6682
210,000,000.
MQ-52 6m
0.47
180
3.521
11.4066
10.7943
210,000,000.
MQ-41 D 6m
1.50
4.903
30.6875
14.6682
210,000,000.
MQ-21 6m
0.71
1.653
0.9174
4.3914
210,000,000.
MQ-21 6m
0.71
1.653
0.9174
4.3914
210,000,000.
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
251
Contact:
Page:
5 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Point loads
No.
No.
1
2
Position
Forces [kN]
Moments [kNm]
Forces [kN]
[m]
Ex
Ey
0.15
0.0000
0.0000
0.8750
0.0000
0.0000
0.0000
0.1000
0.0000
0.32
0.0000
0.0000
0.8750
0.0000
0.0000
0.0000
0.1000
0.0000
Load description
No.
Type
Custom load
Custom load
Description
Size [mm]
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Span [m]
252
Contact:
Page:
6 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Calculation summary
1 Beams
(1) Connections
[1] Supports
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-41 D 6m
1.16
0.0
0.00
MQ-52 6m
18.45
0.0
0.00
MQ-41 D 6m
1.16
0.0
0.00
MQ-21 6m
0.02
0.0
0.00
MQ-21 6m
0.02
0.0
0.00
Beam No.
(Design load)
Designation
Forces[kN]
X
Moments[kNm]
Z
Utilization[%]
MQP-82
1.4010
0.0050
0.0000
0.0000
0.0000
0.0020
9.00
MQW-4
0.0000
0.0000
-1.3200
0.0000
0.0000
0.0000
25.00
MQW-4
0.0000
0.0000
-1.3200
0.0000
0.0000
0.0000
25.00
MQP-82
1.4010
-0.0050
0.0000
0.0000
0.0000
-0.0020
9.00
MQP-45
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0000
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQP-45
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0000
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
253
Contact:
Page:
7 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Support No.
5
7
01-Mar-15
Forces[kN]
Designation
Moments[kNm]
MQP-82
0.0000
-0.0050
1.4010
0.0020
0.0000
0.0000
MQP-82
0.0000
-0.0050
1.4010
0.0020
0.0000
0.0000
MQP-45
0.0000
0.0050
0.0110
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0050
0.0110
0.0000
0.0000
0.0000
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-41 D 6m
9.01
0.0
0.00
MQ-52 6m
12.11
0.0
0.00
MQ-41 D 6m
9.01
0.0
0.00
MQ-21 6m
0.02
0.0
0.00
MQ-21 6m
0.02
0.0
0.00
(Design load)
Beam No.
Forces[kN]
Designation
MQP-82
Moments[kNm]
Utilization[%]
0.9410
0.0030
0.1000
0.0000
-0.1500
0.0020
18.00
MQW-4
0.1000
0.0000
-0.8800
0.0000
0.0000
0.0000
19.00
MQW-4
-0.1000
0.0000
-0.8800
0.0000
0.0000
0.0000
18.00
MQP-82
0.9410
-0.0030
-0.1000
0.0000
0.1500
-0.0020
18.00
MQP-45
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0000
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQP-45
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0000
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
Support No.
5
7
(Design load)
Designation
Forces[kN]
Moments[kNm]
MQP-82
0.1000
-0.0030
0.9410
0.0020
0.1500
0.0000
MQP-82
0.1000
-0.0030
0.9410
0.0020
0.1500
0.0000
MQP-45
0.0000
0.0030
0.0080
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0030
0.0080
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
254
Contact:
Page:
8 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Designation
Torsion
Stress
Torsion
[%]
[]
[%]
MQ-41 D 6m
9.01
0.0
0.00
MQ-52 6m
12.11
0.0
0.00
MQ-41 D 6m
9.01
0.0
0.00
MQ-21 6m
0.02
0.0
0.00
MQ-21 6m
0.02
0.0
0.00
(Design load)
Beam No.
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MQP-82
0.9410
0.0030
-0.1000
0.0000
0.1500
0.0020
18.00
MQW-4
-0.1000
0.0000
-0.8800
0.0000
0.0000
0.0000
18.00
MQW-4
0.1000
0.0000
-0.8800
0.0000
0.0000
0.0000
19.00
MQP-82
0.9410
-0.0030
0.1000
0.0000
-0.1500
-0.0020
18.00
MQP-45
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0000
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQP-45
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0000
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
(Design load)
Forces[kN]
Moments[kNm]
Node No.
Support No.
MQP-82
-0.1000
-0.0030
0.9410
0.0020
-0.1500
0.0000
MQP-82
-0.1000
-0.0030
0.9410
0.0020
-0.1500
0.0000
MQP-45
0.0000
0.0030
0.0080
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0030
0.0080
0.0000
0.0000
0.0000
Designation
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-41 D 6m
2.97
0.0
0.00
MQ-52 6m
12.03
0.0
0.00
MQ-41 D 6m
2.97
0.0
0.00
MQ-21 6m
0.02
0.0
0.00
MQ-21 6m
0.02
0.0
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
255
Contact:
Page:
9 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Beam No.
01-Mar-15
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MQP-82
0.9410
0.0030
0.0300
0.0000
-0.0450
0.0020
10.00
MQW-4
0.0300
0.0000
-0.8800
0.0000
0.0000
0.0000
18.00
MQW-4
-0.0300
0.0000
-0.8800
0.0000
0.0000
0.0000
17.00
MQP-82
0.9410
-0.0030
-0.0300
0.0000
0.0450
-0.0020
10.00
MQP-45
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0000
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQP-45
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0000
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
(Design load)
Support No.
4
5
7
Forces[kN]
Designation
Moments[kNm]
MQP-82
0.0300
-0.0030
0.9410
0.0020
0.0450
0.0000
MQP-82
0.0300
-0.0030
0.9410
0.0020
0.0450
0.0000
MQP-45
0.0000
0.0030
0.0080
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0030
0.0080
0.0000
0.0000
0.0000
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-41 D 6m
2.97
0.0
0.00
MQ-52 6m
12.03
0.0
0.00
MQ-41 D 6m
2.97
0.0
0.00
MQ-21 6m
0.02
0.0
0.00
MQ-21 6m
0.02
0.0
0.00
Beam No.
2
3
(Design load)
Designation
Forces[kN]
Moments[kNm]
Utilization[%]
MQP-82
0.9410
0.0030
-0.0300
0.0000
0.0450
0.0020
10.00
MQW-4
-0.0300
0.0000
-0.8800
0.0000
0.0000
0.0000
17.00
MQW-4
0.0300
0.0000
-0.8800
0.0000
0.0000
0.0000
18.00
MQP-82
0.9410
-0.0030
0.0300
0.0000
-0.0450
-0.0020
10.00
MQP-45
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0000
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQP-45
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0000
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
256
Contact:
Page:
10 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
Support No.
5
7
01-Mar-15
(Design load)
Designation
Forces[kN]
Moments[kNm]
MQP-82
-0.0300
-0.0030
0.9410
0.0020
-0.0450
0.0000
MQP-82
-0.0300
-0.0030
0.9410
0.0020
-0.0450
0.0000
MQP-45
0.0000
0.0030
0.0080
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0030
0.0080
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
257
Contact:
Page:
11 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Stress:
Beam No. 1: MQ-41 D 6m
Position
[m]
0.00
0.00
0.00
Actual
[kN/m]
22,100.000
410.000
22,110.000
Limit
[kN/m]
245,450.000
141,710.000
245,450.000
Utilization
[%]
9.01
0.29
9.01
[m]
0.15
0.00
0.15
Actual
[kN/m]
-46,760.000
-7,150.000
46,960.000
Limit
[kN/m]
254,550.000
146,960.000
254,550.000
Utilization
[%]
18.37
4.86
18.45
[m]
0.00
0.00
0.00
Actual
[kN/m]
22,100.000
-410.000
22,110.000
Limit
[kN/m]
245,450.000
141,710.000
245,450.000
Utilization
[%]
9.01
0.29
9.01
[m]
0.00
0.00
0.00
Actual
[kN/m]
60.000
0.000
60.000
Limit
[kN/m]
263,640.000
0.000
263,640.000
Utilization
[%]
0.02
0.00
0.02
[m]
0.00
0.00
0.00
Actual
[kN/m]
60.000
0.000
60.000
Limit
[kN/m]
263,640.000
0.000
263,640.000
Utilization
[%]
0.02
0.00
0.02
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
258
Contact:
Page:
12 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Displacement SLS1:
Beam No.
Value
Position [m]
u-X
u-Y
u-Z
[%]
Max. Displacement
1.50
0.0
0.0
0.0
0.25
Max. Displacement
0.23
0.0
0.0
0.1
5.93
Max. Displacement
1.50
0.0
0.0
0.0
0.25
Max. Displacement
0.39
0.0
0.0
0.0
0.38
Max. Displacement
0.39
0.0
0.0
0.0
0.38
Displacement [mm]
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Utilization
259
Contact:
Page:
13 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
(Design load)
Support load:
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
-0.0050
1.4010
0.0020
0.0000
0.0000
0.0000
-0.0050
1.4010
0.0020
0.0000
0.0000
0.0000
0.0050
0.0110
0.0000
0.0000
0.0000
0.0000
0.0050
0.0110
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.1000
-0.0030
0.9410
0.0020
0.1500
0.0000
0.1000
-0.0030
0.9410
0.0020
0.1500
0.0000
0.0000
0.0030
0.0080
0.0000
0.0000
0.0000
0.0000
0.0030
0.0080
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
-0.1000
-0.0030
0.9410
0.0020
-0.1500
0.0000
-0.1000
-0.0030
0.9410
0.0020
-0.1500
0.0000
0.0000
0.0030
0.0080
0.0000
0.0000
0.0000
0.0000
0.0030
0.0080
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
260
Contact:
Page:
14 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0300
-0.0030
0.9410
0.0020
0.0450
0.0000
0.0300
-0.0030
0.9410
0.0020
0.0450
0.0000
0.0000
0.0030
0.0080
0.0000
0.0000
0.0000
0.0000
0.0030
0.0080
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
-0.0300
-0.0030
0.9410
0.0020
-0.0450
0.0000
-0.0300
-0.0030
0.9410
0.0020
-0.0450
0.0000
0.0000
0.0030
0.0080
0.0000
0.0000
0.0000
0.0000
0.0030
0.0080
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
261
Contact:
Page:
15 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
262
Contact:
Page:
1 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
263
Contact:
Page:
2 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Calculation factors:
Load type:
Seismic
LC1: g
LC2: q
LC3: Ex
Earthquake in X-direction
LC4: Ey
Earthquake in Y-direction
1.1
1.5
1.35
Load combinations:
ULS1 = 1.35*LC1+1.5*LC2
SLS1 = 1*LC1+1*LC2
ULS2 = 1*LC1+1*LC2+1*LC4
ULS3 = 1*LC1+1*LC2-1*LC4
ULS4 = 1*LC1+1*LC2+0.3*LC4
ULS5 = 1*LC1+1*LC2-0.3*LC4
Maximum beam allowable deflection:
200
150
1.5
Local
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
264
Contact:
Page:
3 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Parts List:
Channels
Pos
Qty
2
3
Description
Item
369585
1.6
369604
369598
Beam No.
0.59
4,5
12.4
1.52
1,3
1.3
0.47
Item
Weight [kg]
Node No.
Connections
Description
Pos
Qty
369660
0.8
6,8
369649
0.7
5,7
369652
3.8
1,4
369658
0.5
2,3
Fixations
Description
Item
Pos
Qty
24
369623
371587
Fixation text
Accessories
Pos
Qty
10
Description
Channel end cap MQZ-E41
Item
369685
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
0.0
0.00
265
Contact:
Page:
4 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Static model:
Node
Hinged axis
Connection
No.
0.0000
0.0000
0.0000
0.0000
0.0000
1.5000
Y,Z
MQW-4
0.5500
0.0000
1.5000
Y,Z
MQW-4
0.5500
0.0000
0.0000
0.0000
-0.5000
0.0000
X,Y,Z
0.0000
0.0000
0.5000
X,Z
0.5500
-0.5000
0.0000
X,Y,Z
0.5500
0.0000
0.5000
X,Z
MQP-82
Building material
Concrete
MQP-82
Concrete
MQP-45
Concrete
MQW-8/45 r
MQP-45
Concrete
MQW-8/45 r
Beams
Beam
Channel
No.
Length
Rotation
Iy
Iz
[m]
[]
[cm]
[cm]
[cm]
[kN/m]
MQ-41 D 6m
1.50
180
4.903
30.6875
14.6682
210,000,000.
MQ-52 6m
0.55
180
3.521
11.4066
10.7943
210,000,000.
MQ-41 D 6m
1.50
4.903
30.6875
14.6682
210,000,000.
MQ-21 6m
0.71
1.653
0.9174
4.3914
210,000,000.
MQ-21 6m
0.71
1.653
0.9174
4.3914
210,000,000.
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
266
Contact:
Page:
5 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Point loads
No.
No.
1
2
Position
Forces [kN]
Moments [kNm]
Forces [kN]
[m]
Ex
Ey
0.19
0.0000
0.0000
2.2875
0.0000
0.0000
0.0000
0.0000
0.2640
0.37
0.0000
0.0000
2.2875
0.0000
0.0000
0.0000
0.0000
0.2640
Load description
No.
Type
Custom load
Custom load
Description
Size [mm]
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Span [m]
267
Contact:
Page:
6 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Calculation summary
1 Beams
(1) Connections
[1] Supports
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-41 D 6m
3.48
0.0
0.00
MQ-52 6m
58.04
0.0
0.00
MQ-41 D 6m
3.51
0.0
0.00
MQ-21 6m
0.05
0.0
0.00
MQ-21 6m
0.05
0.0
0.00
Beam No.
(Design load)
Designation
Forces[kN]
X
Moments[kNm]
Z
Utilization[%]
MQP-82
3.5020
0.0120
0.0000
0.0000
0.0000
0.0060
23.00
MQW-4
0.0000
0.0000
-3.4300
0.0000
0.0000
0.0000
66.00
MQW-4
0.0000
0.0000
-3.4500
0.0000
0.0000
0.0000
66.00
MQP-82
3.5270
-0.0120
0.0000
0.0000
0.0000
-0.0060
23.00
MQP-45
0.0200
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQP-45
0.0200
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
268
Contact:
Page:
7 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Support No.
5
7
01-Mar-15
Forces[kN]
Designation
Moments[kNm]
MQP-82
0.0000
-0.0120
3.5020
0.0060
0.0000
0.0000
MQP-82
0.0000
-0.0120
3.5270
0.0060
0.0000
0.0000
MQP-45
0.0000
0.0120
0.0180
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0120
0.0180
0.0000
0.0000
0.0000
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-41 D 6m
16.88
0.0
0.00
MQ-52 6m
41.82
0.0
0.00
MQ-41 D 6m
16.89
0.0
0.00
MQ-21 6m
3.24
0.0
0.00
MQ-21 6m
3.26
0.0
0.00
(Design load)
Beam No.
2
3
Designation
Forces[kN]
Moments[kNm]
Utilization[%]
MQP-82
1.3550
0.7320
0.0000
0.0000
0.0000
0.1030
97.00
MQW-4
0.0000
0.2600
-2.2900
0.0000
0.0000
0.0000
85.00
MQW-4
0.0000
0.2600
-2.3000
0.0000
0.0000
0.0000
86.00
MQP-82
1.3640
-0.7370
0.0000
0.0000
0.0000
-0.1040
98.00
MQP-45
1.4100
0.0000
0.0000
0.0000
0.0000
0.0000
20.00
MQW-8/45 r
1.4000
0.0000
0.0000
0.0000
0.0000
0.0000
33.00
MQP-45
1.4200
0.0000
0.0000
0.0000
0.0000
0.0000
20.00
MQW-8/45 r
1.4100
0.0000
0.0000
0.0000
0.0000
0.0000
34.00
Support No.
5
7
(Design load)
Designation
Forces[kN]
Moments[kNm]
MQP-82
0.0000
-0.7320
1.3550
0.1030
0.0000
0.0000
MQP-82
0.0000
-0.7370
1.3640
0.1040
0.0000
0.0000
MQP-45
0.0000
0.9950
0.9990
0.0000
0.0000
0.0000
MQP-45
0.0000
1.0020
1.0070
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
269
Contact:
Page:
8 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Designation
Torsion
Stress
Torsion
[%]
[]
[%]
MQ-41 D 6m
17.91
0.0
0.00
MQ-52 6m
41.82
0.0
0.00
MQ-41 D 6m
17.92
0.0
0.00
MQ-21 6m
3.19
0.0
0.00
MQ-21 6m
3.21
0.0
0.00
(Design load)
Beam No.
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MQP-82
3.3290
-0.7160
0.0000
0.0000
0.0000
-0.0950
90.00
MQW-4
0.0000
-0.2600
-2.2900
0.0000
0.0000
0.0000
85.00
MQW-4
0.0000
-0.2600
-2.3000
0.0000
0.0000
0.0000
86.00
MQP-82
3.3520
0.7210
0.0000
0.0000
0.0000
0.0960
91.00
MQP-45
-1.3800
0.0000
0.0000
0.0000
0.0000
0.0000
14.00
MQW-8/45 r
-1.3900
0.0000
0.0000
0.0000
0.0000
0.0000
33.00
MQP-45
-1.3900
0.0000
0.0000
0.0000
0.0000
0.0000
14.00
MQW-8/45 r
-1.4000
0.0000
0.0000
0.0000
0.0000
0.0000
33.00
(Design load)
Forces[kN]
Moments[kNm]
Node No.
Support No.
MQP-82
0.0000
0.7160
3.3290
-0.0950
0.0000
0.0000
MQP-82
0.0000
0.7210
3.3520
-0.0960
0.0000
0.0000
MQP-45
0.0000
-0.9790
-0.9750
0.0000
0.0000
0.0000
MQP-45
0.0000
-0.9860
-0.9820
0.0000
0.0000
0.0000
Designation
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-41 D 6m
6.53
0.0
0.00
MQ-52 6m
39.32
0.0
0.00
MQ-41 D 6m
6.54
0.0
0.00
MQ-21 6m
0.99
0.0
0.00
MQ-21 6m
1.01
0.0
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
270
Contact:
Page:
9 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Beam No.
01-Mar-15
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MQP-82
2.0460
0.2250
0.0000
0.0000
0.0000
0.0340
32.00
MQW-4
0.0000
0.0800
-2.2900
0.0000
0.0000
0.0000
57.00
MQW-4
0.0000
0.0800
-2.3000
0.0000
0.0000
0.0000
57.00
MQP-82
2.0600
-0.2270
0.0000
0.0000
0.0000
-0.0340
32.00
MQP-45
0.4300
0.0000
0.0000
0.0000
0.0000
0.0000
6.00
MQW-8/45 r
0.4300
0.0000
0.0000
0.0000
0.0000
0.0000
10.00
MQP-45
0.4400
0.0000
0.0000
0.0000
0.0000
0.0000
6.00
MQW-8/45 r
0.4300
0.0000
0.0000
0.0000
0.0000
0.0000
10.00
(Design load)
Support No.
4
5
7
Forces[kN]
Designation
Moments[kNm]
MQP-82
0.0000
-0.2250
2.0460
0.0340
0.0000
0.0000
MQP-82
0.0000
-0.2270
2.0600
0.0340
0.0000
0.0000
MQP-45
0.0000
0.3040
0.3080
0.0000
0.0000
0.0000
MQP-45
0.0000
0.3060
0.3110
0.0000
0.0000
0.0000
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-41 D 6m
6.82
0.0
0.00
MQ-52 6m
39.32
0.0
0.00
MQ-41 D 6m
6.84
0.0
0.00
MQ-21 6m
0.94
0.0
0.00
MQ-21 6m
0.94
0.0
0.00
Beam No.
2
3
(Design load)
Designation
Forces[kN]
Moments[kNm]
Utilization[%]
MQP-82
2.6380
-0.2090
0.0000
0.0000
0.0000
-0.0260
25.00
MQW-4
0.0000
-0.0800
-2.2900
0.0000
0.0000
0.0000
57.00
MQW-4
0.0000
-0.0800
-2.3000
0.0000
0.0000
0.0000
57.00
MQP-82
2.6570
0.2110
0.0000
0.0000
0.0000
0.0260
25.00
MQP-45
-0.4000
0.0000
0.0000
0.0000
0.0000
0.0000
4.00
MQW-8/45 r
-0.4100
0.0000
0.0000
0.0000
0.0000
0.0000
10.00
MQP-45
-0.4100
0.0000
0.0000
0.0000
0.0000
0.0000
4.00
MQW-8/45 r
-0.4100
0.0000
0.0000
0.0000
0.0000
0.0000
10.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
271
Contact:
Page:
10 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
Support No.
5
7
01-Mar-15
(Design load)
Designation
Forces[kN]
Moments[kNm]
MQP-82
0.0000
0.2090
2.6380
-0.0260
0.0000
0.0000
MQP-82
0.0000
0.2110
2.6570
-0.0260
0.0000
0.0000
MQP-45
0.0000
-0.2880
-0.2840
0.0000
0.0000
0.0000
MQP-45
0.0000
-0.2900
-0.2860
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
272
Contact:
Page:
11 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Stress:
Beam No. 1: MQ-41 D 6m
Position
[m]
0.50
0.00
0.50
Actual
[kN/m]
43,350.000
5,170.000
43,950.000
Limit
[kN/m]
245,450.000
141,710.000
245,450.000
Utilization
[%]
17.66
3.65
17.91
[m]
0.19
0.37
0.37
Actual
[kN/m]
-147,290.000
18,680.000
147,730.000
Limit
[kN/m]
254,550.000
146,960.000
254,550.000
Utilization
[%]
57.86
12.71
58.04
[m]
0.50
0.00
0.50
Actual
[kN/m]
43,390.000
-5,240.000
43,990.000
Limit
[kN/m]
245,450.000
141,710.000
245,450.000
Utilization
[%]
17.68
3.70
17.92
[m]
0.00
0.00
0.00
Actual
[kN/m]
8,530.000
0.000
8,530.000
Limit
[kN/m]
263,640.000
0.000
263,640.000
Utilization
[%]
3.24
0.00
3.24
[m]
0.00
0.00
0.00
Actual
[kN/m]
8,590.000
0.000
8,590.000
Limit
[kN/m]
263,640.000
0.000
263,640.000
Utilization
[%]
3.26
0.00
3.26
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
273
Contact:
Page:
12 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Displacement SLS1:
Beam No.
Value
Position [m]
Max. Displacement
1.50
Displacement [mm]
Utilization
u-X
u-Y
u-Z
[%]
0.0
0.0
0.0
0.63
Max. Displacement
0.28
0.0
0.0
0.6
21.54
Max. Displacement
1.50
0.0
0.0
0.0
0.64
Max. Displacement
0.42
0.0
0.0
0.0
0.49
Max. Displacement
0.42
0.0
0.0
0.0
0.49
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
274
Contact:
Page:
13 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
(Design load)
Support load:
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
-0.0120
3.5020
0.0060
0.0000
0.0000
0.0000
-0.0120
3.5270
0.0060
0.0000
0.0000
0.0000
0.0120
0.0180
0.0000
0.0000
0.0000
0.0000
0.0120
0.0180
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
-0.7320
1.3550
0.1030
0.0000
0.0000
0.0000
-0.7370
1.3640
0.1040
0.0000
0.0000
0.0000
0.9950
0.9990
0.0000
0.0000
0.0000
0.0000
1.0020
1.0070
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
0.7160
3.3290
-0.0950
0.0000
0.0000
0.0000
0.7210
3.3520
-0.0960
0.0000
0.0000
0.0000
-0.9790
-0.9750
0.0000
0.0000
0.0000
0.0000
-0.9860
-0.9820
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
275
Contact:
Page:
14 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
-0.2250
2.0460
0.0340
0.0000
0.0000
0.0000
-0.2270
2.0600
0.0340
0.0000
0.0000
0.0000
0.3040
0.3080
0.0000
0.0000
0.0000
0.0000
0.3060
0.3110
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
0.2090
2.6380
-0.0260
0.0000
0.0000
0.0000
0.2110
2.6570
-0.0260
0.0000
0.0000
0.0000
-0.2880
-0.2840
0.0000
0.0000
0.0000
0.0000
-0.2900
-0.2860
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
276
Contact:
Page:
15 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
277
Contact:
Page:
1 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
278
Contact:
Page:
2 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Calculation factors:
Load type:
Seismic
LC1: g
LC2: q
LC3: Ex
Earthquake in X-direction
LC4: Ey
Earthquake in Y-direction
1.1
1.5
1.35
Load combinations:
ULS1 = 1.35*LC1+1.5*LC2
SLS1 = 1*LC1+1*LC2
ULS2 = 1*LC1+1*LC2+1*LC3
ULS3 = 1*LC1+1*LC2-1*LC3
ULS4 = 1*LC1+1*LC2+0.3*LC3
ULS5 = 1*LC1+1*LC2-0.3*LC3
Maximum beam allowable deflection:
200
150
1.5
Local
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
279
Contact:
Page:
3 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Parts List:
Channels
Pos
Qty
2
3
Description
Item
369585
1.6
369604
369598
Beam No.
0.59
4,5
12.4
1.52
1,3
1.3
0.47
Item
Weight [kg]
Node No.
Connections
Description
Pos
Qty
369660
0.8
6,8
369649
0.7
5,7
369652
3.8
1,4
369658
0.5
2,3
Fixations
Description
Item
Pos
Qty
24
369623
371587
Fixation text
Accessories
Pos
Qty
10
Description
Channel end cap MQZ-E41
Item
369685
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
0.0
0.00
280
Contact:
Page:
4 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Static model:
Node
Hinged axis
Connection
No.
0.0000
0.0000
0.0000
0.0000
0.0000
1.5000
Y,Z
MQW-4
0.5500
0.0000
1.5000
Y,Z
MQW-4
0.5500
0.0000
0.0000
0.0000
-0.5000
0.0000
X,Y,Z
0.0000
0.0000
0.5000
X,Z
0.5500
-0.5000
0.0000
X,Y,Z
0.5500
0.0000
0.5000
X,Z
MQP-82
Building material
Concrete
MQP-82
Concrete
MQP-45
Concrete
MQW-8/45 r
MQP-45
Concrete
MQW-8/45 r
Beams
Beam
Channel
No.
Length
Rotation
Iy
Iz
[m]
[]
[cm]
[cm]
[cm]
[kN/m]
MQ-41 D 6m
1.50
180
4.903
30.6875
14.6682
210,000,000.
MQ-52 6m
0.55
180
3.521
11.4066
10.7943
210,000,000.
MQ-41 D 6m
1.50
4.903
30.6875
14.6682
210,000,000.
MQ-21 6m
0.71
1.653
0.9174
4.3914
210,000,000.
MQ-21 6m
0.71
1.653
0.9174
4.3914
210,000,000.
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
281
Contact:
Page:
5 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Point loads
No.
No.
1
2
Position
Forces [kN]
Moments [kNm]
Forces [kN]
[m]
Ex
Ey
0.19
0.0000
0.0000
2.2875
0.0000
0.0000
0.0000
0.2640
0.0000
0.37
0.0000
0.0000
2.2875
0.0000
0.0000
0.0000
0.2640
0.0000
Load description
No.
Type
Custom load
Custom load
Description
Size [mm]
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Span [m]
282
Contact:
Page:
6 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Calculation summary
1 Beams
(1) Connections
[1] Supports
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-41 D 6m
3.48
0.0
0.00
MQ-52 6m
58.04
0.0
0.00
MQ-41 D 6m
3.51
0.0
0.00
MQ-21 6m
0.05
0.0
0.00
MQ-21 6m
0.05
0.0
0.00
Beam No.
(Design load)
Designation
Forces[kN]
X
Moments[kNm]
Z
Utilization[%]
MQP-82
3.5020
0.0120
0.0000
0.0000
0.0000
0.0060
23.00
MQW-4
0.0000
0.0000
-3.4300
0.0000
0.0000
0.0000
66.00
MQW-4
0.0000
0.0000
-3.4500
0.0000
0.0000
0.0000
66.00
MQP-82
3.5270
-0.0120
0.0000
0.0000
0.0000
-0.0060
23.00
MQP-45
0.0200
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQP-45
0.0200
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
283
Contact:
Page:
7 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Support No.
5
7
01-Mar-15
Forces[kN]
Designation
Moments[kNm]
MQP-82
0.0000
-0.0120
3.5020
0.0060
0.0000
0.0000
MQP-82
0.0000
-0.0120
3.5270
0.0060
0.0000
0.0000
MQP-45
0.0000
0.0120
0.0180
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0120
0.0180
0.0000
0.0000
0.0000
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-41 D 6m
23.88
0.0
0.00
MQ-52 6m
38.98
0.0
0.00
MQ-41 D 6m
23.89
0.0
0.00
MQ-21 6m
0.02
0.0
0.00
MQ-21 6m
0.02
0.0
0.00
(Design load)
Beam No.
Forces[kN]
Designation
MQP-82
Moments[kNm]
Utilization[%]
2.3420
0.0080
0.2640
0.0000
-0.3960
0.0040
46.00
MQW-4
0.2600
0.0000
-2.2900
0.0000
0.0000
0.0000
49.00
MQW-4
-0.2600
0.0000
-2.3000
0.0000
0.0000
0.0000
48.00
MQP-82
2.3580
-0.0080
-0.2640
0.0000
0.3960
-0.0040
46.00
MQP-45
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQP-45
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
Support No.
5
7
(Design load)
Designation
Forces[kN]
Moments[kNm]
MQP-82
0.2640
-0.0080
2.3420
0.0040
0.3960
0.0000
MQP-82
0.2640
-0.0080
2.3580
0.0040
0.3960
0.0000
MQP-45
0.0000
0.0080
0.0120
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0080
0.0120
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
284
Contact:
Page:
8 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Designation
Torsion
Stress
Torsion
[%]
[]
[%]
MQ-41 D 6m
23.88
0.0
0.00
MQ-52 6m
38.98
0.0
0.00
MQ-41 D 6m
23.89
0.0
0.00
MQ-21 6m
0.02
0.0
0.00
MQ-21 6m
0.02
0.0
0.00
(Design load)
Beam No.
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MQP-82
2.3420
0.0080
-0.2640
0.0000
0.3960
0.0040
46.00
MQW-4
-0.2600
0.0000
-2.2900
0.0000
0.0000
0.0000
48.00
MQW-4
0.2600
0.0000
-2.3000
0.0000
0.0000
0.0000
49.00
MQP-82
2.3580
-0.0080
0.2640
0.0000
-0.3960
-0.0040
46.00
MQP-45
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQP-45
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
(Design load)
Forces[kN]
Moments[kNm]
Node No.
Support No.
MQP-82
-0.2640
-0.0080
2.3420
0.0040
-0.3960
0.0000
MQP-82
-0.2640
-0.0080
2.3580
0.0040
-0.3960
0.0000
MQP-45
0.0000
0.0080
0.0120
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0080
0.0120
0.0000
0.0000
0.0000
Designation
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-41 D 6m
8.52
0.0
0.00
MQ-52 6m
38.78
0.0
0.00
MQ-41 D 6m
8.54
0.0
0.00
MQ-21 6m
0.02
0.0
0.00
MQ-21 6m
0.02
0.0
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
285
Contact:
Page:
9 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Beam No.
01-Mar-15
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MQP-82
2.3420
0.0080
0.0790
0.0000
-0.1190
0.0040
25.00
MQW-4
0.0800
0.0000
-2.2900
0.0000
0.0000
0.0000
46.00
MQW-4
-0.0800
0.0000
-2.3000
0.0000
0.0000
0.0000
45.00
MQP-82
2.3580
-0.0080
-0.0790
0.0000
0.1190
-0.0040
25.00
MQP-45
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQP-45
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
(Design load)
Support No.
4
5
7
Forces[kN]
Designation
Moments[kNm]
MQP-82
0.0790
-0.0080
2.3420
0.0040
0.1190
0.0000
MQP-82
0.0790
-0.0080
2.3580
0.0040
0.1190
0.0000
MQP-45
0.0000
0.0080
0.0120
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0080
0.0120
0.0000
0.0000
0.0000
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-41 D 6m
8.52
0.0
0.00
MQ-52 6m
38.78
0.0
0.00
MQ-41 D 6m
8.54
0.0
0.00
MQ-21 6m
0.02
0.0
0.00
MQ-21 6m
0.02
0.0
0.00
Beam No.
2
3
(Design load)
Designation
Forces[kN]
Moments[kNm]
Utilization[%]
MQP-82
2.3420
0.0080
-0.0790
0.0000
0.1190
0.0040
25.00
MQW-4
-0.0800
0.0000
-2.2900
0.0000
0.0000
0.0000
45.00
MQW-4
0.0800
0.0000
-2.3000
0.0000
0.0000
0.0000
46.00
MQP-82
2.3580
-0.0080
0.0790
0.0000
-0.1190
-0.0040
25.00
MQP-45
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQP-45
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
286
Contact:
Page:
10 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
Support No.
5
7
01-Mar-15
(Design load)
Designation
Forces[kN]
Moments[kNm]
MQP-82
-0.0790
-0.0080
2.3420
0.0040
-0.1190
0.0000
MQP-82
-0.0790
-0.0080
2.3580
0.0040
-0.1190
0.0000
MQP-45
0.0000
0.0080
0.0120
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0080
0.0120
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
287
Contact:
Page:
11 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Stress:
Beam No. 1: MQ-41 D 6m
Position
[m]
0.00
0.00
0.00
Actual
[kN/m]
58,610.000
1,120.000
58,610.000
Limit
[kN/m]
245,450.000
141,710.000
245,450.000
Utilization
[%]
23.88
0.79
23.88
[m]
0.19
0.37
0.37
Actual
[kN/m]
-147,290.000
18,680.000
147,730.000
Limit
[kN/m]
254,550.000
146,960.000
254,550.000
Utilization
[%]
57.86
12.71
58.04
[m]
0.00
0.00
0.00
Actual
[kN/m]
58,650.000
-1,120.000
58,650.000
Limit
[kN/m]
245,450.000
141,710.000
245,450.000
Utilization
[%]
23.89
0.79
23.89
[m]
0.00
0.00
0.00
Actual
[kN/m]
120.000
0.000
120.000
Limit
[kN/m]
263,640.000
0.000
263,640.000
Utilization
[%]
0.05
0.00
0.05
[m]
0.00
0.00
0.00
Actual
[kN/m]
120.000
0.000
120.000
Limit
[kN/m]
263,640.000
0.000
263,640.000
Utilization
[%]
0.05
0.00
0.05
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
288
Contact:
Page:
12 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Displacement SLS1:
Beam No.
Value
Position [m]
Max. Displacement
1.50
Displacement [mm]
Utilization
u-X
u-Y
u-Z
[%]
0.0
0.0
0.0
0.63
Max. Displacement
0.28
0.0
0.0
0.6
21.54
Max. Displacement
1.50
0.0
0.0
0.0
0.64
Max. Displacement
0.42
0.0
0.0
0.0
0.49
Max. Displacement
0.42
0.0
0.0
0.0
0.49
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
289
Contact:
Page:
13 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
(Design load)
Support load:
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
-0.0120
3.5020
0.0060
0.0000
0.0000
0.0000
-0.0120
3.5270
0.0060
0.0000
0.0000
0.0000
0.0120
0.0180
0.0000
0.0000
0.0000
0.0000
0.0120
0.0180
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.2640
-0.0080
2.3420
0.0040
0.3960
0.0000
0.2640
-0.0080
2.3580
0.0040
0.3960
0.0000
0.0000
0.0080
0.0120
0.0000
0.0000
0.0000
0.0000
0.0080
0.0120
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
-0.2640
-0.0080
2.3420
0.0040
-0.3960
0.0000
-0.2640
-0.0080
2.3580
0.0040
-0.3960
0.0000
0.0000
0.0080
0.0120
0.0000
0.0000
0.0000
0.0000
0.0080
0.0120
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
290
Contact:
Page:
14 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0790
-0.0080
2.3420
0.0040
0.1190
0.0000
0.0790
-0.0080
2.3580
0.0040
0.1190
0.0000
0.0000
0.0080
0.0120
0.0000
0.0000
0.0000
0.0000
0.0080
0.0120
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
-0.0790
-0.0080
2.3420
0.0040
-0.1190
0.0000
-0.0790
-0.0080
2.3580
0.0040
-0.1190
0.0000
0.0000
0.0080
0.0120
0.0000
0.0000
0.0000
0.0000
0.0080
0.0120
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
291
Contact:
Page:
15 of 15
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
292
Contact:
Page:
1 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
293
Contact:
Page:
2 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Calculation factors:
Load type:
Seismic
LC1: g
LC2: q
LC3: Ex
Earthquake in X-direction
LC4: Ey
Earthquake in Y-direction
1.1
1.5
1.35
Load combinations:
ULS1 = 1.35*LC1+1.5*LC2
SLS1 = 1*LC1+1*LC2
ULS2 = 1*LC1+1*LC2+1*LC4
ULS3 = 1*LC1+1*LC2-1*LC4
ULS4 = 1*LC1+1*LC2+0.3*LC4
ULS5 = 1*LC1+1*LC2-0.3*LC4
Maximum beam allowable deflection:
200
150
1.5
Local
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
294
Contact:
Page:
3 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Parts List:
Channels
Pos
Qty
2
3
Description
Item
369585
1.5
369605
369605
Beam No.
0.57
4,5
22.9
1.62
1,3
1.6
0.23
Item
Weight [kg]
Node No.
Connections
Description
Pos
Qty
369660
0.8
6,8
369649
0.7
5,7
369653
5.6
1,4
369658
1.0
2,3
Fixations
Description
Item
Pos
Qty
28
369623
371587
Fixation text
Accessories
Description
Item
Pos
Qty
10
370598
0.0
0.00
11
369686
0.0
0.00
12
369685
0.0
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
295
Contact:
Page:
4 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Static model:
Node
Hinged axis
Connection
No.
0.0000
0.0000
0.0000
0.0000
0.0000
1.5000
Y,Z
MQW-4 double
0.3500
0.0000
1.5000
Y,Z
MQW-4 double
0.3500
0.0000
0.0000
0.0000
-0.5000
0.0000
X,Y,Z
0.0000
0.0000
0.5000
X,Z
0.3500
-0.5000
0.0000
X,Y,Z
0.3500
0.0000
0.5000
X,Z
MQP-124
Building material
Concrete
MQP-124
Concrete
MQP-45
Concrete
MQW-8/45 r
MQP-45
Concrete
MQW-8/45 r
Beams
Beam
Channel
No.
Length
Rotation
Iy
Iz
[m]
[]
[cm]
[cm]
[cm]
[kN/m]
MQ-52-72 D 6m
1.50
180
8.449
115
26.1297
210,000,000.
MQ-52-72 D 6m
0.35
180
8.449
115
26.1297
210,000,000.
MQ-52-72 D 6m
1.50
8.449
115
26.1297
210,000,000.
MQ-21 6m
0.71
1.653
0.9174
4.3914
210,000,000.
MQ-21 6m
0.71
1.653
0.9174
4.3914
210,000,000.
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
296
Contact:
Page:
5 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Point loads
No.
No.
Position
Forces [kN]
Moments [kNm]
Forces [kN]
[m]
Ex
Ey
0.17
0.0000
0.0000
4.9000
0.0000
0.0000
0.0000
0.0000
0.5650
Load description
No.
Type
Description
Size [mm]
Span [m]
Custom load
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
297
Contact:
Page:
6 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Calculation summary
1 Beams
(1) Connections
[1] Supports
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-52-72 D 6m
2.21
0.0
0.00
MQ-52-72 D 6m
14.06
0.0
0.00
MQ-52-72 D 6m
2.11
0.0
0.00
MQ-21 6m
0.05
0.0
0.00
MQ-21 6m
0.05
0.0
0.00
Beam No.
(Design load)
Designation
Forces[kN]
X
Moments[kNm]
Z
Utilization[%]
MQP-124
3.9230
0.0130
0.0000
0.0000
0.0000
0.0060
26.00
MQW-4 double
0.0000
0.0000
-3.8000
0.0000
0.0000
0.0000
50.00
MQW-4 double
0.0000
0.0000
-3.5900
0.0000
0.0000
0.0000
47.00
MQP-124
3.7140
-0.0120
0.0000
0.0000
0.0000
-0.0060
25.00
MQP-45
0.0200
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQP-45
0.0200
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
298
Contact:
Page:
7 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Support No.
5
7
01-Mar-15
Forces[kN]
Designation
Moments[kNm]
MQP-124
0.0000
-0.0130
3.9230
0.0060
0.0000
0.0000
MQP-124
0.0000
-0.0120
3.7140
0.0060
0.0000
0.0000
MQP-45
0.0000
0.0130
0.0190
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0120
0.0180
0.0000
0.0000
0.0000
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-52-72 D 6m
10.63
0.0
0.00
MQ-52-72 D 6m
10.85
0.0
0.00
MQ-52-72 D 6m
9.91
0.0
0.00
MQ-21 6m
3.42
0.0
0.00
MQ-21 6m
3.24
0.0
0.00
(Design load)
Beam No.
2
3
Designation
Forces[kN]
Moments[kNm]
Utilization[%]
MQP-124
1.5840
0.7610
0.0000
0.0000
0.0000
0.0900
87.00
MQW-4 double
0.0000
0.2900
-2.5300
0.0000
0.0000
0.0000
47.00
MQW-4 double
0.0000
0.2700
-2.3900
0.0000
0.0000
0.0000
44.00
MQP-124
1.5020
-0.7190
0.0000
0.0000
0.0000
-0.0850
82.00
MQP-45
1.4900
0.0000
0.0000
0.0000
0.0000
0.0000
21.00
MQW-8/45 r
1.4800
0.0000
0.0000
0.0000
0.0000
0.0000
35.00
MQP-45
1.4100
0.0000
0.0000
0.0000
0.0000
0.0000
20.00
MQW-8/45 r
1.4000
0.0000
0.0000
0.0000
0.0000
0.0000
33.00
Support No.
5
7
(Design load)
Designation
Forces[kN]
Moments[kNm]
MQP-124
0.0000
-0.7610
1.5840
0.0900
0.0000
0.0000
MQP-124
0.0000
-0.7190
1.5020
0.0850
0.0000
0.0000
MQP-45
0.0000
1.0510
1.0560
0.0000
0.0000
0.0000
MQP-45
0.0000
0.9940
0.9980
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
299
Contact:
Page:
8 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Designation
Torsion
Stress
Torsion
[%]
[]
[%]
MQ-52-72 D 6m
11.41
0.0
0.00
MQ-52-72 D 6m
10.85
0.0
0.00
MQ-52-72 D 6m
10.65
0.0
0.00
MQ-21 6m
3.37
0.0
0.00
MQ-21 6m
3.19
0.0
0.00
(Design load)
Beam No.
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MQP-124
3.6700
-0.7440
0.0000
0.0000
0.0000
-0.0810
80.00
MQW-4 double
0.0000
-0.2900
-2.5300
0.0000
0.0000
0.0000
47.00
MQW-4 double
0.0000
-0.2700
-2.3900
0.0000
0.0000
0.0000
44.00
MQP-124
3.4730
0.7030
0.0000
0.0000
0.0000
0.0770
76.00
MQP-45
-1.4600
0.0000
0.0000
0.0000
0.0000
0.0000
15.00
MQW-8/45 r
-1.4700
0.0000
0.0000
0.0000
0.0000
0.0000
35.00
MQP-45
-1.3800
0.0000
0.0000
0.0000
0.0000
0.0000
14.00
MQW-8/45 r
-1.3900
0.0000
0.0000
0.0000
0.0000
0.0000
33.00
(Design load)
Forces[kN]
Moments[kNm]
Node No.
Support No.
MQP-124
0.0000
0.7440
3.6700
-0.0810
0.0000
0.0000
MQP-124
0.0000
0.7030
3.4730
-0.0770
0.0000
0.0000
MQP-45
0.0000
-1.0340
-1.0300
0.0000
0.0000
0.0000
MQP-45
0.0000
-0.9770
-0.9730
0.0000
0.0000
0.0000
Designation
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-52-72 D 6m
4.16
0.0
0.00
MQ-52-72 D 6m
9.71
0.0
0.00
MQ-52-72 D 6m
3.77
0.0
0.00
MQ-21 6m
1.06
0.0
0.00
MQ-21 6m
0.99
0.0
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
300
Contact:
Page:
9 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Beam No.
01-Mar-15
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MQP-124
2.3140
0.2340
0.0000
0.0000
0.0000
0.0300
29.00
MQW-4 double
0.0000
0.0900
-2.5300
0.0000
0.0000
0.0000
33.00
MQW-4 double
0.0000
0.0800
-2.3900
0.0000
0.0000
0.0000
32.00
MQP-124
2.1920
-0.2210
0.0000
0.0000
0.0000
-0.0280
27.00
MQP-45
0.4600
0.0000
0.0000
0.0000
0.0000
0.0000
7.00
MQW-8/45 r
0.4500
0.0000
0.0000
0.0000
0.0000
0.0000
11.00
MQP-45
0.4300
0.0000
0.0000
0.0000
0.0000
0.0000
6.00
MQW-8/45 r
0.4300
0.0000
0.0000
0.0000
0.0000
0.0000
10.00
(Design load)
Support No.
4
5
7
Forces[kN]
Designation
Moments[kNm]
MQP-124
0.0000
-0.2340
2.3140
0.0300
0.0000
0.0000
MQP-124
0.0000
-0.2210
2.1920
0.0280
0.0000
0.0000
MQP-45
0.0000
0.3210
0.3260
0.0000
0.0000
0.0000
MQP-45
0.0000
0.3040
0.3080
0.0000
0.0000
0.0000
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-52-72 D 6m
4.37
0.0
0.00
MQ-52-72 D 6m
9.71
0.0
0.00
MQ-52-72 D 6m
3.97
0.0
0.00
MQ-21 6m
0.99
0.0
0.00
MQ-21 6m
0.94
0.0
0.00
Beam No.
2
3
(Design load)
Designation
Forces[kN]
Moments[kNm]
Utilization[%]
MQP-124
2.9400
-0.2170
0.0000
0.0000
0.0000
-0.0210
22.00
MQW-4 double
0.0000
-0.0900
-2.5300
0.0000
0.0000
0.0000
33.00
MQW-4 double
0.0000
-0.0800
-2.3900
0.0000
0.0000
0.0000
32.00
MQP-124
2.7830
0.2050
0.0000
0.0000
0.0000
0.0200
21.00
MQP-45
-0.4300
0.0000
0.0000
0.0000
0.0000
0.0000
4.00
MQW-8/45 r
-0.4300
0.0000
0.0000
0.0000
0.0000
0.0000
10.00
MQP-45
-0.4000
0.0000
0.0000
0.0000
0.0000
0.0000
4.00
MQW-8/45 r
-0.4100
0.0000
0.0000
0.0000
0.0000
0.0000
10.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
301
Contact:
Page:
10 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
Support No.
5
7
01-Mar-15
(Design load)
Designation
Forces[kN]
Moments[kNm]
MQP-124
0.0000
0.2170
2.9400
-0.0210
0.0000
0.0000
MQP-124
0.0000
0.2050
2.7830
-0.0200
0.0000
0.0000
MQP-45
0.0000
-0.3040
-0.3000
0.0000
0.0000
0.0000
MQP-45
0.0000
-0.2880
-0.2830
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
302
Contact:
Page:
11 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Stress:
Beam No. 1: MQ-52-72 D 6m
Position
[m]
0.50
0.00
0.50
Actual
[kN/m]
27,180.000
-4,530.000
28,000.000
Limit
[kN/m]
245,450.000
141,710.000
245,450.000
Utilization
[%]
11.07
3.20
11.41
[m]
0.17
0.00
0.17
Actual
[kN/m]
-34,390.000
-8,190.000
34,510.000
Limit
[kN/m]
245,450.000
141,710.000
245,450.000
Utilization
[%]
14.01
5.78
14.06
[m]
0.50
0.00
0.50
Actual
[kN/m]
25,360.000
4,290.000
26,150.000
Limit
[kN/m]
245,450.000
141,710.000
245,450.000
Utilization
[%]
10.33
3.03
10.65
[m]
0.00
0.00
0.00
Actual
[kN/m]
9,010.000
0.000
9,010.000
Limit
[kN/m]
263,640.000
0.000
263,640.000
Utilization
[%]
3.42
0.00
3.42
[m]
0.00
0.00
0.00
Actual
[kN/m]
8,530.000
0.000
8,530.000
Limit
[kN/m]
263,640.000
0.000
263,640.000
Utilization
[%]
3.24
0.00
3.24
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
303
Contact:
Page:
12 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Displacement SLS1:
Beam No.
Value
Position [m]
u-X
u-Y
u-Z
[%]
Max. Displacement
1.50
0.0
0.0
0.0
0.39
Max. Displacement
0.17
0.0
0.0
0.0
1.77
Max. Displacement
1.50
0.0
0.0
0.0
0.37
Max. Displacement
0.39
0.0
0.0
0.0
0.42
Max. Displacement
0.39
0.0
0.0
0.0
0.42
Displacement [mm]
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Utilization
304
Contact:
Page:
13 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
(Design load)
Support load:
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
-0.0130
3.9230
0.0060
0.0000
0.0000
0.0000
-0.0120
3.7140
0.0060
0.0000
0.0000
0.0000
0.0130
0.0190
0.0000
0.0000
0.0000
0.0000
0.0120
0.0180
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
-0.7610
1.5840
0.0900
0.0000
0.0000
0.0000
-0.7190
1.5020
0.0850
0.0000
0.0000
0.0000
1.0510
1.0560
0.0000
0.0000
0.0000
0.0000
0.9940
0.9980
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
0.7440
3.6700
-0.0810
0.0000
0.0000
0.0000
0.7030
3.4730
-0.0770
0.0000
0.0000
0.0000
-1.0340
-1.0300
0.0000
0.0000
0.0000
0.0000
-0.9770
-0.9730
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
305
Contact:
Page:
14 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
-0.2340
2.3140
0.0300
0.0000
0.0000
0.0000
-0.2210
2.1920
0.0280
0.0000
0.0000
0.0000
0.3210
0.3260
0.0000
0.0000
0.0000
0.0000
0.3040
0.3080
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
0.2170
2.9400
-0.0210
0.0000
0.0000
0.0000
0.2050
2.7830
-0.0200
0.0000
0.0000
0.0000
-0.3040
-0.3000
0.0000
0.0000
0.0000
0.0000
-0.2880
-0.2830
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
306
Contact:
Page:
15 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
307
Contact:
Page:
1 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
308
Contact:
Page:
2 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Calculation factors:
Load type:
Seismic
LC1: g
LC2: q
LC3: Ex
Earthquake in X-direction
LC4: Ey
Earthquake in Y-direction
1.1
1.5
1.35
Load combinations:
ULS1 = 1.35*LC1+1.5*LC2
SLS1 = 1*LC1+1*LC2
ULS2 = 1*LC1+1*LC2+1*LC3
ULS3 = 1*LC1+1*LC2-1*LC3
ULS4 = 1*LC1+1*LC2+0.3*LC3
ULS5 = 1*LC1+1*LC2-0.3*LC3
Maximum beam allowable deflection:
200
150
1.5
Local
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
309
Contact:
Page:
3 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Parts List:
Channels
Pos
Qty
2
3
Description
Item
369585
1.5
369605
369605
Beam No.
0.57
4,5
22.9
1.62
1,3
1.6
0.23
Item
Weight [kg]
Node No.
Connections
Description
Pos
Qty
369660
0.8
6,8
369649
0.7
5,7
369653
5.6
1,4
369658
1.0
2,3
Fixations
Description
Item
Pos
Qty
28
369623
371587
Fixation text
Accessories
Description
Item
Pos
Qty
10
370598
0.0
0.00
11
369686
0.0
0.00
12
369685
0.0
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
310
Contact:
Page:
4 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Static model:
Node
Hinged axis
Connection
No.
0.0000
0.0000
0.0000
0.0000
0.0000
1.5000
Y,Z
MQW-4 double
0.3500
0.0000
1.5000
Y,Z
MQW-4 double
0.3500
0.0000
0.0000
0.0000
-0.5000
0.0000
X,Y,Z
0.0000
0.0000
0.5000
X,Z
0.3500
-0.5000
0.0000
X,Y,Z
0.3500
0.0000
0.5000
X,Z
MQP-124
Building material
Concrete
MQP-124
Concrete
MQP-45
Concrete
MQW-8/45 r
MQP-45
Concrete
MQW-8/45 r
Beams
Beam
Channel
No.
Length
Rotation
Iy
Iz
[m]
[]
[cm]
[cm]
[cm]
[kN/m]
MQ-52-72 D 6m
1.50
180
8.449
115
26.1297
210,000,000.
MQ-52-72 D 6m
0.35
180
8.449
115
26.1297
210,000,000.
MQ-52-72 D 6m
1.50
8.449
115
26.1297
210,000,000.
MQ-21 6m
0.71
1.653
0.9174
4.3914
210,000,000.
MQ-21 6m
0.71
1.653
0.9174
4.3914
210,000,000.
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
311
Contact:
Page:
5 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Point loads
No.
No.
Position
Forces [kN]
Moments [kNm]
Forces [kN]
[m]
Ex
Ey
0.17
0.0000
0.0000
4.9000
0.0000
0.0000
0.0000
0.5650
0.0000
Load description
No.
Type
Description
Size [mm]
Span [m]
Custom load
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
312
Contact:
Page:
6 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Calculation summary
1 Beams
(1) Connections
[1] Supports
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-52-72 D 6m
2.21
0.0
0.00
MQ-52-72 D 6m
14.06
0.0
0.00
MQ-52-72 D 6m
2.11
0.0
0.00
MQ-21 6m
0.05
0.0
0.00
MQ-21 6m
0.05
0.0
0.00
Beam No.
(Design load)
Designation
Forces[kN]
X
Moments[kNm]
Z
Utilization[%]
MQP-124
3.9230
0.0130
0.0000
0.0000
0.0000
0.0060
26.00
MQW-4 double
0.0000
0.0000
-3.8000
0.0000
0.0000
0.0000
50.00
MQW-4 double
0.0000
0.0000
-3.5900
0.0000
0.0000
0.0000
47.00
MQP-124
3.7140
-0.0120
0.0000
0.0000
0.0000
-0.0060
25.00
MQP-45
0.0200
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQP-45
0.0200
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
313
Contact:
Page:
7 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Support No.
5
7
01-Mar-15
Forces[kN]
Designation
Moments[kNm]
MQP-124
0.0000
-0.0130
3.9230
0.0060
0.0000
0.0000
MQP-124
0.0000
-0.0120
3.7140
0.0060
0.0000
0.0000
MQP-45
0.0000
0.0130
0.0190
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0120
0.0180
0.0000
0.0000
0.0000
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-52-72 D 6m
10.46
0.0
0.00
MQ-52-72 D 6m
9.58
0.0
0.00
MQ-52-72 D 6m
10.40
0.0
0.00
MQ-21 6m
0.05
0.0
0.00
MQ-21 6m
0.02
0.0
0.00
(Design load)
Beam No.
Forces[kN]
Designation
MQP-124
Moments[kNm]
Utilization[%]
2.6270
0.0090
0.2830
0.0000
-0.4240
0.0040
43.00
MQW-4 double
0.2800
0.0000
-2.5300
0.0000
0.0000
0.0000
33.00
MQW-4 double
-0.2800
0.0000
-2.3900
0.0000
0.0000
0.0000
32.00
MQP-124
2.4880
-0.0080
-0.2820
0.0000
0.4240
-0.0040
42.00
MQP-45
0.0200
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQP-45
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
Support No.
5
7
(Design load)
Designation
Forces[kN]
Moments[kNm]
MQP-124
0.2830
-0.0090
2.6270
0.0040
0.4240
0.0000
MQP-124
0.2820
-0.0080
2.4880
0.0040
0.4240
0.0000
MQP-45
0.0000
0.0090
0.0130
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0080
0.0130
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
314
Contact:
Page:
8 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Designation
Torsion
Stress
Torsion
[%]
[]
[%]
MQ-52-72 D 6m
10.46
0.0
0.00
MQ-52-72 D 6m
9.58
0.0
0.00
MQ-52-72 D 6m
10.39
0.0
0.00
MQ-21 6m
0.05
0.0
0.00
MQ-21 6m
0.02
0.0
0.00
(Design load)
Beam No.
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MQP-124
2.6270
0.0090
-0.2830
0.0000
0.4240
0.0040
43.00
MQW-4 double
-0.2800
0.0000
-2.5300
0.0000
0.0000
0.0000
33.00
MQW-4 double
0.2800
0.0000
-2.3900
0.0000
0.0000
0.0000
32.00
MQP-124
2.4880
-0.0080
0.2820
0.0000
-0.4240
-0.0040
42.00
MQP-45
0.0200
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQP-45
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
(Design load)
Forces[kN]
Moments[kNm]
Node No.
Support No.
MQP-124
-0.2830
-0.0090
2.6270
0.0040
-0.4240
0.0000
MQP-124
-0.2820
-0.0080
2.4880
0.0040
-0.4240
0.0000
MQP-45
0.0000
0.0090
0.0130
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0080
0.0130
0.0000
0.0000
0.0000
Designation
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-52-72 D 6m
4.11
0.0
0.00
MQ-52-72 D 6m
9.48
0.0
0.00
MQ-52-72 D 6m
4.05
0.0
0.00
MQ-21 6m
0.05
0.0
0.00
MQ-21 6m
0.02
0.0
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
315
Contact:
Page:
9 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Beam No.
01-Mar-15
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MQP-124
2.6270
0.0090
0.0850
0.0000
-0.1270
0.0040
25.00
MQW-4 double
0.0800
0.0000
-2.5300
0.0000
0.0000
0.0000
33.00
MQW-4 double
-0.0800
0.0000
-2.3900
0.0000
0.0000
0.0000
32.00
MQP-124
2.4880
-0.0080
-0.0850
0.0000
0.1270
-0.0040
24.00
MQP-45
0.0200
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQP-45
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
(Design load)
Support No.
4
5
7
Forces[kN]
Designation
Moments[kNm]
MQP-124
0.0850
-0.0090
2.6270
0.0040
0.1270
0.0000
MQP-124
0.0850
-0.0080
2.4880
0.0040
0.1270
0.0000
MQP-45
0.0000
0.0090
0.0130
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0080
0.0130
0.0000
0.0000
0.0000
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-52-72 D 6m
4.11
0.0
0.00
MQ-52-72 D 6m
9.48
0.0
0.00
MQ-52-72 D 6m
4.05
0.0
0.00
MQ-21 6m
0.05
0.0
0.00
MQ-21 6m
0.02
0.0
0.00
Beam No.
2
3
(Design load)
Designation
Forces[kN]
Moments[kNm]
Utilization[%]
MQP-124
2.6270
0.0090
-0.0850
0.0000
0.1270
0.0040
25.00
MQW-4 double
-0.0800
0.0000
-2.5300
0.0000
0.0000
0.0000
33.00
MQW-4 double
0.0800
0.0000
-2.3900
0.0000
0.0000
0.0000
32.00
MQP-124
2.4880
-0.0080
0.0850
0.0000
-0.1270
-0.0040
24.00
MQP-45
0.0200
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQP-45
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
316
Contact:
Page:
10 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
Support No.
5
7
01-Mar-15
(Design load)
Designation
Forces[kN]
Moments[kNm]
MQP-124
-0.0850
-0.0090
2.6270
0.0040
-0.1270
0.0000
MQP-124
-0.0850
-0.0080
2.4880
0.0040
-0.1270
0.0000
MQP-45
0.0000
0.0090
0.0130
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0080
0.0130
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
317
Contact:
Page:
11 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Stress:
Beam No. 1: MQ-52-72 D 6m
Position
[m]
0.00
0.00
0.00
Actual
[kN/m]
25,670.000
650.000
25,670.000
Limit
[kN/m]
245,450.000
141,710.000
245,450.000
Utilization
[%]
10.46
0.46
10.46
[m]
0.17
0.00
0.17
Actual
[kN/m]
-34,390.000
-8,190.000
34,510.000
Limit
[kN/m]
245,450.000
141,710.000
245,450.000
Utilization
[%]
14.01
5.78
14.06
[m]
0.00
0.00
0.00
Actual
[kN/m]
25,520.000
-650.000
25,520.000
Limit
[kN/m]
245,450.000
141,710.000
245,450.000
Utilization
[%]
10.40
0.46
10.40
[m]
0.00
0.00
0.00
Actual
[kN/m]
120.000
0.000
120.000
Limit
[kN/m]
263,640.000
0.000
263,640.000
Utilization
[%]
0.05
0.00
0.05
[m]
0.00
0.00
0.00
Actual
[kN/m]
120.000
0.000
120.000
Limit
[kN/m]
263,640.000
0.000
263,640.000
Utilization
[%]
0.05
0.00
0.05
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
318
Contact:
Page:
12 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Displacement SLS1:
Beam No.
Value
Position [m]
u-X
u-Y
u-Z
[%]
Max. Displacement
1.50
0.0
0.0
0.0
0.39
Max. Displacement
0.17
0.0
0.0
0.0
1.77
Max. Displacement
1.50
0.0
0.0
0.0
0.37
Max. Displacement
0.39
0.0
0.0
0.0
0.42
Max. Displacement
0.39
0.0
0.0
0.0
0.42
Displacement [mm]
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Utilization
319
Contact:
Page:
13 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
(Design load)
Support load:
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
-0.0130
3.9230
0.0060
0.0000
0.0000
0.0000
-0.0120
3.7140
0.0060
0.0000
0.0000
0.0000
0.0130
0.0190
0.0000
0.0000
0.0000
0.0000
0.0120
0.0180
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.2830
-0.0090
2.6270
0.0040
0.4240
0.0000
0.2820
-0.0080
2.4880
0.0040
0.4240
0.0000
0.0000
0.0090
0.0130
0.0000
0.0000
0.0000
0.0000
0.0080
0.0130
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
-0.2830
-0.0090
2.6270
0.0040
-0.4240
0.0000
-0.2820
-0.0080
2.4880
0.0040
-0.4240
0.0000
0.0000
0.0090
0.0130
0.0000
0.0000
0.0000
0.0000
0.0080
0.0130
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
320
Contact:
Page:
14 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0850
-0.0090
2.6270
0.0040
0.1270
0.0000
0.0850
-0.0080
2.4880
0.0040
0.1270
0.0000
0.0000
0.0090
0.0130
0.0000
0.0000
0.0000
0.0000
0.0080
0.0130
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
-0.0850
-0.0090
2.6270
0.0040
-0.1270
0.0000
-0.0850
-0.0080
2.4880
0.0040
-0.1270
0.0000
0.0000
0.0090
0.0130
0.0000
0.0000
0.0000
0.0000
0.0080
0.0130
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
321
Contact:
Page:
15 of 15
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
322
Contact:
Page:
1 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
323
Contact:
Page:
2 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Calculation factors:
Load type:
Seismic
LC1: g
LC2: q
LC3: Ex
Earthquake in X-direction
LC4: Ey
Earthquake in Y-direction
1.1
1.5
1.35
Load combinations:
ULS1 = 1.35*LC1+1.5*LC2
SLS1 = 1*LC1+1*LC2
ULS2 = 1*LC1+1*LC2+1*LC4
ULS3 = 1*LC1+1*LC2-1*LC4
ULS4 = 1*LC1+1*LC2+0.3*LC4
ULS5 = 1*LC1+1*LC2-0.3*LC4
Maximum beam allowable deflection:
200
150
1.5
Local
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
324
Contact:
Page:
3 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Parts List:
Channels
Pos
Qty
2
3
Description
Item
369585
1.5
369605
369605
Beam No.
0.57
4,5
22.9
1.62
1,3
2.0
0.28
Item
Weight [kg]
Node No.
Connections
Description
Pos
Qty
369660
0.8
6,8
369649
0.7
5,7
369653
5.6
1,4
369658
1.0
2,3
Fixations
Description
Item
Pos
Qty
28
369623
371587
Fixation text
Accessories
Description
Item
Pos
Qty
10
370598
0.0
0.00
11
369686
0.0
0.00
12
369685
0.0
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
325
Contact:
Page:
4 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Static model:
Node
Hinged axis
Connection
No.
0.0000
0.0000
0.0000
0.0000
0.0000
1.5000
Y,Z
MQW-4 double
0.4000
0.0000
1.5000
Y,Z
MQW-4 double
0.4000
0.0000
0.0000
0.0000
-0.5000
0.0000
X,Y,Z
0.0000
0.0000
0.5000
X,Z
0.4000
-0.5000
0.0000
X,Y,Z
0.4000
0.0000
0.5000
X,Z
MQP-124
Building material
Concrete
MQP-124
Concrete
MQP-45
Concrete
MQW-8/45 r
MQP-45
Concrete
MQW-8/45 r
Beams
Beam
Channel
No.
Length
Rotation
Iy
Iz
[m]
[]
[cm]
[cm]
[cm]
[kN/m]
MQ-52-72 D 6m
1.50
180
8.449
115
26.1297
210,000,000.
MQ-52-72 D 6m
0.40
180
8.449
115
26.1297
210,000,000.
MQ-52-72 D 6m
1.50
8.449
115
26.1297
210,000,000.
MQ-21 6m
0.71
1.653
0.9174
4.3914
210,000,000.
MQ-21 6m
0.71
1.653
0.9174
4.3914
210,000,000.
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
326
Contact:
Page:
5 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Point loads
No.
No.
Position
Forces [kN]
Moments [kNm]
Forces [kN]
[m]
Ex
Ey
0.20
0.0000
0.0000
5.7750
0.0000
0.0000
0.0000
0.0000
0.6650
Load description
No.
Type
Description
Size [mm]
Span [m]
Custom load
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
327
Contact:
Page:
6 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Calculation summary
1 Beams
(1) Connections
[1] Supports
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-52-72 D 6m
2.48
0.0
0.00
MQ-52-72 D 6m
19.09
0.0
0.00
MQ-52-72 D 6m
2.48
0.0
0.00
MQ-21 6m
0.07
0.0
0.00
MQ-21 6m
0.07
0.0
0.00
Beam No.
(Design load)
Designation
Forces[kN]
X
Moments[kNm]
Z
Utilization[%]
MQP-124
4.4750
0.0150
0.0000
0.0000
0.0000
0.0070
30.00
MQW-4 double
0.0000
0.0000
-4.3500
0.0000
0.0000
0.0000
58.00
MQW-4 double
0.0000
0.0000
-4.3500
0.0000
0.0000
0.0000
58.00
MQP-124
4.4750
-0.0150
0.0000
0.0000
0.0000
-0.0070
30.00
MQP-45
0.0300
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0200
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQP-45
0.0300
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0200
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
328
Contact:
Page:
7 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Support No.
5
7
01-Mar-15
Forces[kN]
Designation
Moments[kNm]
MQP-124
0.0000
-0.0150
4.4750
0.0070
0.0000
0.0000
MQP-124
0.0000
-0.0150
4.4750
0.0070
0.0000
0.0000
MQP-45
0.0000
0.0150
0.0210
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0150
0.0210
0.0000
0.0000
0.0000
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-52-72 D 6m
12.10
0.0
0.00
MQ-52-72 D 6m
14.70
0.0
0.00
MQ-52-72 D 6m
12.10
0.0
0.00
MQ-21 6m
3.92
0.0
0.00
MQ-21 6m
3.92
0.0
0.00
(Design load)
Beam No.
2
3
Designation
Forces[kN]
Moments[kNm]
Utilization[%]
MQP-124
1.8010
0.8710
0.0000
0.0000
0.0000
0.1030
100.00
MQW-4 double
0.0000
0.3300
-2.9000
0.0000
0.0000
0.0000
54.00
MQW-4 double
0.0000
0.3300
-2.9000
0.0000
0.0000
0.0000
54.00
MQP-124
1.8010
-0.8710
0.0000
0.0000
0.0000
-0.1030
100.00
MQP-45
1.7100
0.0000
0.0000
0.0000
0.0000
0.0000
24.00
MQW-8/45 r
1.7000
0.0000
0.0000
0.0000
0.0000
0.0000
40.00
MQP-45
1.7100
0.0000
0.0000
0.0000
0.0000
0.0000
24.00
MQW-8/45 r
1.7000
0.0000
0.0000
0.0000
0.0000
0.0000
40.00
Support No.
5
7
(Design load)
Designation
Forces[kN]
Moments[kNm]
MQP-124
0.0000
-0.8710
1.8010
0.1030
0.0000
0.0000
MQP-124
0.0000
-0.8710
1.8010
0.1030
0.0000
0.0000
MQP-45
0.0000
1.2030
1.2080
0.0000
0.0000
0.0000
MQP-45
0.0000
1.2030
1.2080
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
329
Contact:
Page:
8 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Designation
Torsion
Stress
Torsion
[%]
[]
[%]
MQ-52-72 D 6m
12.99
0.0
0.00
MQ-52-72 D 6m
14.70
0.0
0.00
MQ-52-72 D 6m
12.99
0.0
0.00
MQ-21 6m
3.85
0.0
0.00
MQ-21 6m
3.85
0.0
0.00
(Design load)
Beam No.
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MQP-124
4.1890
-0.8510
0.0000
0.0000
0.0000
-0.0930
91.00
MQW-4 double
0.0000
-0.3300
-2.9000
0.0000
0.0000
0.0000
54.00
MQW-4 double
0.0000
-0.3300
-2.9000
0.0000
0.0000
0.0000
54.00
MQP-124
4.1890
0.8510
0.0000
0.0000
0.0000
0.0930
91.00
MQP-45
-1.6700
0.0000
0.0000
0.0000
0.0000
0.0000
17.00
MQW-8/45 r
-1.6800
0.0000
0.0000
0.0000
0.0000
0.0000
40.00
MQP-45
-1.6700
0.0000
0.0000
0.0000
0.0000
0.0000
17.00
MQW-8/45 r
-1.6800
0.0000
0.0000
0.0000
0.0000
0.0000
40.00
(Design load)
Forces[kN]
Moments[kNm]
Node No.
Support No.
MQP-124
0.0000
0.8510
4.1890
-0.0930
0.0000
0.0000
MQP-124
0.0000
0.8510
4.1890
-0.0930
0.0000
0.0000
MQP-45
0.0000
-1.1840
-1.1790
0.0000
0.0000
0.0000
MQP-45
0.0000
-1.1840
-1.1790
0.0000
0.0000
0.0000
Designation
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-52-72 D 6m
4.66
0.0
0.00
MQ-52-72 D 6m
13.26
0.0
0.00
MQ-52-72 D 6m
4.66
0.0
0.00
MQ-21 6m
1.19
0.0
0.00
MQ-21 6m
1.19
0.0
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
330
Contact:
Page:
9 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Beam No.
01-Mar-15
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MQP-124
2.6370
0.2680
0.0000
0.0000
0.0000
0.0340
33.00
MQW-4 double
0.0000
0.1000
-2.9000
0.0000
0.0000
0.0000
38.00
MQW-4 double
0.0000
0.1000
-2.9000
0.0000
0.0000
0.0000
38.00
MQP-124
2.6370
-0.2680
0.0000
0.0000
0.0000
-0.0340
33.00
MQP-45
0.5200
0.0000
0.0000
0.0000
0.0000
0.0000
7.00
MQW-8/45 r
0.5200
0.0000
0.0000
0.0000
0.0000
0.0000
12.00
MQP-45
0.5200
0.0000
0.0000
0.0000
0.0000
0.0000
7.00
MQW-8/45 r
0.5200
0.0000
0.0000
0.0000
0.0000
0.0000
12.00
(Design load)
Support No.
4
5
7
Forces[kN]
Designation
Moments[kNm]
MQP-124
0.0000
-0.2680
2.6370
0.0340
0.0000
0.0000
MQP-124
0.0000
-0.2680
2.6370
0.0340
0.0000
0.0000
MQP-45
0.0000
0.3680
0.3720
0.0000
0.0000
0.0000
MQP-45
0.0000
0.3680
0.3720
0.0000
0.0000
0.0000
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-52-72 D 6m
4.90
0.0
0.00
MQ-52-72 D 6m
13.26
0.0
0.00
MQ-52-72 D 6m
4.90
0.0
0.00
MQ-21 6m
1.15
0.0
0.00
MQ-21 6m
1.15
0.0
0.00
Beam No.
2
3
(Design load)
Designation
Forces[kN]
Moments[kNm]
Utilization[%]
MQP-124
3.3530
-0.2490
0.0000
0.0000
0.0000
-0.0250
25.00
MQW-4 double
0.0000
-0.1000
-2.9000
0.0000
0.0000
0.0000
38.00
MQW-4 double
0.0000
-0.1000
-2.9000
0.0000
0.0000
0.0000
38.00
MQP-124
3.3530
0.2490
0.0000
0.0000
0.0000
0.0250
25.00
MQP-45
-0.4900
0.0000
0.0000
0.0000
0.0000
0.0000
5.00
MQW-8/45 r
-0.5000
0.0000
0.0000
0.0000
0.0000
0.0000
12.00
MQP-45
-0.4900
0.0000
0.0000
0.0000
0.0000
0.0000
5.00
MQW-8/45 r
-0.5000
0.0000
0.0000
0.0000
0.0000
0.0000
12.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
331
Contact:
Page:
10 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
Support No.
5
7
01-Mar-15
(Design load)
Designation
Forces[kN]
Moments[kNm]
MQP-124
0.0000
0.2490
3.3530
-0.0250
0.0000
0.0000
MQP-124
0.0000
0.2490
3.3530
-0.0250
0.0000
0.0000
MQP-45
0.0000
-0.3480
-0.3440
0.0000
0.0000
0.0000
MQP-45
0.0000
-0.3480
-0.3440
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
332
Contact:
Page:
11 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Stress:
Beam No. 1: MQ-52-72 D 6m
Position
[m]
0.50
0.00
0.50
Actual
[kN/m]
30,950.000
-5,190.000
31,900.000
Limit
[kN/m]
245,450.000
141,710.000
245,450.000
Utilization
[%]
12.61
3.66
12.99
[m]
0.20
0.00
0.20
Actual
[kN/m]
-46,750.000
-9,370.000
46,870.000
Limit
[kN/m]
245,450.000
141,710.000
245,450.000
Utilization
[%]
19.05
6.62
19.09
[m]
0.50
0.00
0.50
Actual
[kN/m]
30,950.000
5,190.000
31,900.000
Limit
[kN/m]
245,450.000
141,710.000
245,450.000
Utilization
[%]
12.61
3.66
12.99
[m]
0.00
0.00
0.00
Actual
[kN/m]
10,340.000
0.000
10,340.000
Limit
[kN/m]
263,640.000
0.000
263,640.000
Utilization
[%]
3.92
0.00
3.92
[m]
0.00
0.00
0.00
Actual
[kN/m]
10,340.000
0.000
10,340.000
Limit
[kN/m]
263,640.000
0.000
263,640.000
Utilization
[%]
3.92
0.00
3.92
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
333
Contact:
Page:
12 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Displacement SLS1:
Beam No.
Value
Position [m]
u-X
u-Y
u-Z
[%]
Max. Displacement
1.50
0.0
0.0
0.0
0.44
Max. Displacement
0.20
0.0
0.0
0.0
2.44
Max. Displacement
1.50
0.0
0.0
0.0
0.44
Max. Displacement
0.42
0.0
0.0
0.0
0.44
Max. Displacement
0.42
0.0
0.0
0.0
0.44
Displacement [mm]
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Utilization
334
Contact:
Page:
13 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
(Design load)
Support load:
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
-0.0150
4.4750
0.0070
0.0000
0.0000
0.0000
-0.0150
4.4750
0.0070
0.0000
0.0000
0.0000
0.0150
0.0210
0.0000
0.0000
0.0000
0.0000
0.0150
0.0210
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
-0.8710
1.8010
0.1030
0.0000
0.0000
0.0000
-0.8710
1.8010
0.1030
0.0000
0.0000
0.0000
1.2030
1.2080
0.0000
0.0000
0.0000
0.0000
1.2030
1.2080
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
0.8510
4.1890
-0.0930
0.0000
0.0000
0.0000
0.8510
4.1890
-0.0930
0.0000
0.0000
0.0000
-1.1840
-1.1790
0.0000
0.0000
0.0000
0.0000
-1.1840
-1.1790
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
335
Contact:
Page:
14 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
-0.2680
2.6370
0.0340
0.0000
0.0000
0.0000
-0.2680
2.6370
0.0340
0.0000
0.0000
0.0000
0.3680
0.3720
0.0000
0.0000
0.0000
0.0000
0.3680
0.3720
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
0.2490
3.3530
-0.0250
0.0000
0.0000
0.0000
0.2490
3.3530
-0.0250
0.0000
0.0000
0.0000
-0.3480
-0.3440
0.0000
0.0000
0.0000
0.0000
-0.3480
-0.3440
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
336
Contact:
Page:
15 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
337
Contact:
Page:
1 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
338
Contact:
Page:
2 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Calculation factors:
Load type:
Seismic
LC1: g
LC2: q
LC3: Ex
Earthquake in X-direction
LC4: Ey
Earthquake in Y-direction
1.1
1.5
1.35
Load combinations:
ULS1 = 1.35*LC1+1.5*LC2
SLS1 = 1*LC1+1*LC2
ULS2 = 1*LC1+1*LC2+1*LC3
ULS3 = 1*LC1+1*LC2-1*LC3
ULS4 = 1*LC1+1*LC2+0.3*LC3
ULS5 = 1*LC1+1*LC2-0.3*LC3
Maximum beam allowable deflection:
200
150
1.5
Local
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
339
Contact:
Page:
3 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Parts List:
Channels
Pos
Qty
2
3
Description
Item
369585
1.5
369605
369605
Beam No.
0.57
4,5
22.9
1.62
1,3
2.0
0.28
Item
Weight [kg]
Node No.
Connections
Description
Pos
Qty
369660
0.8
6,8
369649
0.7
5,7
369653
5.6
1,4
369658
1.0
2,3
Fixations
Description
Item
Pos
Qty
28
369623
371587
Fixation text
Accessories
Description
Item
Pos
Qty
10
370598
0.0
0.00
11
369686
0.0
0.00
12
369685
0.0
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
340
Contact:
Page:
4 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Static model:
Node
Hinged axis
Connection
No.
0.0000
0.0000
0.0000
0.0000
0.0000
1.5000
Y,Z
MQW-4 double
0.4000
0.0000
1.5000
Y,Z
MQW-4 double
0.4000
0.0000
0.0000
0.0000
-0.5000
0.0000
X,Y,Z
0.0000
0.0000
0.5000
X,Z
0.4000
-0.5000
0.0000
X,Y,Z
0.4000
0.0000
0.5000
X,Z
MQP-124
Building material
Concrete
MQP-124
Concrete
MQP-45
Concrete
MQW-8/45 r
MQP-45
Concrete
MQW-8/45 r
Beams
Beam
Channel
No.
Length
Rotation
Iy
Iz
[m]
[]
[cm]
[cm]
[cm]
[kN/m]
MQ-52-72 D 6m
1.50
180
8.449
115
26.1297
210,000,000.
MQ-52-72 D 6m
0.40
180
8.449
115
26.1297
210,000,000.
MQ-52-72 D 6m
1.50
8.449
115
26.1297
210,000,000.
MQ-21 6m
0.71
1.653
0.9174
4.3914
210,000,000.
MQ-21 6m
0.71
1.653
0.9174
4.3914
210,000,000.
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
341
Contact:
Page:
5 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Point loads
No.
No.
Position
Forces [kN]
Moments [kNm]
Forces [kN]
[m]
Ex
Ey
0.20
0.0000
0.0000
5.7750
0.0000
0.0000
0.0000
0.6650
0.0000
Load description
No.
Type
Description
Size [mm]
Span [m]
Custom load
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
342
Contact:
Page:
6 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Calculation summary
1 Beams
(1) Connections
[1] Supports
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-52-72 D 6m
2.48
0.0
0.00
MQ-52-72 D 6m
19.09
0.0
0.00
MQ-52-72 D 6m
2.48
0.0
0.00
MQ-21 6m
0.07
0.0
0.00
MQ-21 6m
0.07
0.0
0.00
Beam No.
(Design load)
Designation
Forces[kN]
X
Moments[kNm]
Z
Utilization[%]
MQP-124
4.4750
0.0150
0.0000
0.0000
0.0000
0.0070
30.00
MQW-4 double
0.0000
0.0000
-4.3500
0.0000
0.0000
0.0000
58.00
MQW-4 double
0.0000
0.0000
-4.3500
0.0000
0.0000
0.0000
58.00
MQP-124
4.4750
-0.0150
0.0000
0.0000
0.0000
-0.0070
30.00
MQP-45
0.0300
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0200
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQP-45
0.0300
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0200
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
343
Contact:
Page:
7 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Support No.
5
7
01-Mar-15
Forces[kN]
Designation
Moments[kNm]
MQP-124
0.0000
-0.0150
4.4750
0.0070
0.0000
0.0000
MQP-124
0.0000
-0.0150
4.4750
0.0070
0.0000
0.0000
MQP-45
0.0000
0.0150
0.0210
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0150
0.0210
0.0000
0.0000
0.0000
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-52-72 D 6m
12.39
0.0
0.00
MQ-52-72 D 6m
12.89
0.0
0.00
MQ-52-72 D 6m
12.39
0.0
0.00
MQ-21 6m
0.05
0.0
0.00
MQ-21 6m
0.05
0.0
0.00
(Design load)
Beam No.
Forces[kN]
Designation
MQP-124
Moments[kNm]
Utilization[%]
2.9950
0.0100
0.3330
0.0000
-0.4990
0.0050
50.00
MQW-4 double
0.3300
0.0000
-2.9000
0.0000
0.0000
0.0000
38.00
MQW-4 double
-0.3300
0.0000
-2.9000
0.0000
0.0000
0.0000
38.00
MQP-124
2.9950
-0.0100
-0.3320
0.0000
0.4990
-0.0050
50.00
MQP-45
0.0200
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQP-45
0.0200
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
Support No.
5
7
(Design load)
Designation
Forces[kN]
Moments[kNm]
MQP-124
0.3330
-0.0100
2.9950
0.0050
0.4990
0.0000
MQP-124
0.3320
-0.0100
2.9950
0.0050
0.4990
0.0000
MQP-45
0.0000
0.0100
0.0140
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0100
0.0140
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
344
Contact:
Page:
8 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Designation
Torsion
Stress
Torsion
[%]
[]
[%]
MQ-52-72 D 6m
12.39
0.0
0.00
MQ-52-72 D 6m
12.89
0.0
0.00
MQ-52-72 D 6m
12.39
0.0
0.00
MQ-21 6m
0.05
0.0
0.00
MQ-21 6m
0.05
0.0
0.00
(Design load)
Beam No.
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MQP-124
2.9950
0.0100
-0.3320
0.0000
0.4990
0.0050
50.00
MQW-4 double
-0.3300
0.0000
-2.9000
0.0000
0.0000
0.0000
38.00
MQW-4 double
0.3300
0.0000
-2.9000
0.0000
0.0000
0.0000
38.00
MQP-124
2.9950
-0.0100
0.3330
0.0000
-0.4990
-0.0050
50.00
MQP-45
0.0200
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQP-45
0.0200
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
(Design load)
Forces[kN]
Moments[kNm]
Node No.
Support No.
MQP-124
-0.3320
-0.0100
2.9950
0.0050
-0.4990
0.0000
MQP-124
-0.3330
-0.0100
2.9950
0.0050
-0.4990
0.0000
MQP-45
0.0000
0.0100
0.0140
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0100
0.0140
0.0000
0.0000
0.0000
Designation
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-52-72 D 6m
4.73
0.0
0.00
MQ-52-72 D 6m
12.78
0.0
0.00
MQ-52-72 D 6m
4.73
0.0
0.00
MQ-21 6m
0.05
0.0
0.00
MQ-21 6m
0.05
0.0
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
345
Contact:
Page:
9 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Beam No.
01-Mar-15
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MQP-124
2.9950
0.0100
0.1000
0.0000
-0.1500
0.0050
29.00
MQW-4 double
0.1000
0.0000
-2.9000
0.0000
0.0000
0.0000
38.00
MQW-4 double
-0.1000
0.0000
-2.9000
0.0000
0.0000
0.0000
38.00
MQP-124
2.9950
-0.0100
-0.1000
0.0000
0.1500
-0.0050
29.00
MQP-45
0.0200
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQP-45
0.0200
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
(Design load)
Support No.
4
5
7
Forces[kN]
Designation
Moments[kNm]
MQP-124
0.1000
-0.0100
2.9950
0.0050
0.1500
0.0000
MQP-124
0.1000
-0.0100
2.9950
0.0050
0.1500
0.0000
MQP-45
0.0000
0.0100
0.0140
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0100
0.0140
0.0000
0.0000
0.0000
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-52-72 D 6m
4.73
0.0
0.00
MQ-52-72 D 6m
12.78
0.0
0.00
MQ-52-72 D 6m
4.73
0.0
0.00
MQ-21 6m
0.05
0.0
0.00
MQ-21 6m
0.05
0.0
0.00
Beam No.
2
3
(Design load)
Designation
Forces[kN]
Moments[kNm]
Utilization[%]
MQP-124
2.9950
0.0100
-0.1000
0.0000
0.1500
0.0050
29.00
MQW-4 double
-0.1000
0.0000
-2.9000
0.0000
0.0000
0.0000
38.00
MQW-4 double
0.1000
0.0000
-2.9000
0.0000
0.0000
0.0000
38.00
MQP-124
2.9950
-0.0100
0.1000
0.0000
-0.1500
-0.0050
29.00
MQP-45
0.0200
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQP-45
0.0200
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0100
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
346
Contact:
Page:
10 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
Support No.
5
7
01-Mar-15
(Design load)
Designation
Forces[kN]
Moments[kNm]
MQP-124
-0.1000
-0.0100
2.9950
0.0050
-0.1500
0.0000
MQP-124
-0.1000
-0.0100
2.9950
0.0050
-0.1500
0.0000
MQP-45
0.0000
0.0100
0.0140
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0100
0.0140
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
347
Contact:
Page:
11 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Stress:
Beam No. 1: MQ-52-72 D 6m
Position
[m]
0.00
0.00
0.00
Actual
[kN/m]
30,410.000
760.000
30,410.000
Limit
[kN/m]
245,450.000
141,710.000
245,450.000
Utilization
[%]
12.39
0.53
12.39
[m]
0.20
0.00
0.20
Actual
[kN/m]
-46,750.000
-9,370.000
46,870.000
Limit
[kN/m]
245,450.000
141,710.000
245,450.000
Utilization
[%]
19.05
6.62
19.09
[m]
0.00
0.00
0.00
Actual
[kN/m]
30,420.000
-760.000
30,420.000
Limit
[kN/m]
245,450.000
141,710.000
245,450.000
Utilization
[%]
12.39
0.53
12.39
[m]
0.00
0.00
0.00
Actual
[kN/m]
180.000
0.000
180.000
Limit
[kN/m]
263,640.000
0.000
263,640.000
Utilization
[%]
0.07
0.00
0.07
[m]
0.00
0.00
0.00
Actual
[kN/m]
180.000
0.000
180.000
Limit
[kN/m]
263,640.000
0.000
263,640.000
Utilization
[%]
0.07
0.00
0.07
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
348
Contact:
Page:
12 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Displacement SLS1:
Beam No.
Value
Position [m]
u-X
u-Y
u-Z
[%]
Max. Displacement
1.50
0.0
0.0
0.0
0.44
Max. Displacement
0.20
0.0
0.0
0.0
2.44
Max. Displacement
1.50
0.0
0.0
0.0
0.44
Max. Displacement
0.42
0.0
0.0
0.0
0.44
Max. Displacement
0.42
0.0
0.0
0.0
0.44
Displacement [mm]
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Utilization
349
Contact:
Page:
13 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
(Design load)
Support load:
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
-0.0150
4.4750
0.0070
0.0000
0.0000
0.0000
-0.0150
4.4750
0.0070
0.0000
0.0000
0.0000
0.0150
0.0210
0.0000
0.0000
0.0000
0.0000
0.0150
0.0210
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.3330
-0.0100
2.9950
0.0050
0.4990
0.0000
0.3320
-0.0100
2.9950
0.0050
0.4990
0.0000
0.0000
0.0100
0.0140
0.0000
0.0000
0.0000
0.0000
0.0100
0.0140
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
-0.3320
-0.0100
2.9950
0.0050
-0.4990
0.0000
-0.3330
-0.0100
2.9950
0.0050
-0.4990
0.0000
0.0000
0.0100
0.0140
0.0000
0.0000
0.0000
0.0000
0.0100
0.0140
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
350
Contact:
Page:
14 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.1000
-0.0100
2.9950
0.0050
0.1500
0.0000
0.1000
-0.0100
2.9950
0.0050
0.1500
0.0000
0.0000
0.0100
0.0140
0.0000
0.0000
0.0000
0.0000
0.0100
0.0140
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
-0.1000
-0.0100
2.9950
0.0050
-0.1500
0.0000
-0.1000
-0.0100
2.9950
0.0050
-0.1500
0.0000
0.0000
0.0100
0.0140
0.0000
0.0000
0.0000
0.0000
0.0100
0.0140
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
351
Contact:
Page:
15 of 15
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
352
Contact:
Page:
1 of 10
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
353
Contact:
Page:
2 of 10
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Calculation factors:
Load type:
Seismic
LC1: g
LC2: q
LC3: Ex
Earthquake in X-direction
LC4: Ey
Earthquake in Y-direction
1.1
1.5
1.35
Load combinations:
ULS1 = 1.35*LC1+1.5*LC2
SLS1 = 1*LC1+1*LC2
200
150
1.5
Local
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
354
Contact:
Page:
3 of 10
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Parts List:
Channels
Description
Item
Pos
Qty
Girder MI-90 3m
304798
3.4
0.36
Bracket MIC-C120-D-2000
270472
31.1
1.54
Bracket MIC-C90-D-2000
267793
24.7
1.54
Item
Weight [kg]
Node No.
304803
5.0
2,3
Beam No.
Connections
Pos
Qty
Description
Connector MIC-90-U
Fixations
Description
Item
Pos
Qty
304888
371593
Fixation text
Accessories
Description
Item
Pos
Qty
432077
0.0
0.00
432078
0.0
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
355
Contact:
Page:
4 of 10
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Static model:
Node
Hinged axis
Connection
No.
0.0000
0.0000
0.0000
0.0000
0.0000
1.5000
Y,Z
MIC-90-U
0.5000
0.0000
1.5000
Y,Z
MIC-90-U
0.5000
0.0000
0.0000
Building material
MIC-C90-D-2000
Concrete
MIC-C120-D-2000
Concrete
Beams
Beam
Channel
No.
Length
Rotation
Iy
Iz
[m]
[]
[cm]
[cm]
[cm]
[kN/m]
MIC-C90-D-2000
1.50
180
1,003
115
115
210,000,000.
MI-90 3m
0.50
180
1,003
115
115
210,000,000.
MIC-C120-D-2000
1.50
1,376
266
174
210,000,000.
No.
Position
Forces [kN]
Moments [kNm]
Forces [kN]
[m]
Ex
Ey
0.25
0.0000
1.6200
14.0500
0.0000
0.0000
0.0000
0.0000
0.0000
Load description
No.
Type
Description
Size [mm]
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Span [m]
356
Contact:
Page:
5 of 10
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
No.
Date:
Type
Description
Size [mm]
Span [m]
01-Mar-15
Custom load
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
357
Contact:
Page:
6 of 10
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Calculation summary
1 Beams
(1) Connections
[1] Supports
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MIC-C90-D-2000
35.88
0.0
0.00
MI-90 3m
53.37
0.0
0.00
MIC-C120-D-
27.41
0.0
0.00
(Design load)
Beam No.
MIC-90-U
MIC-C120-D-
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MIC-C90-D-
10.7230
-1.2150
0.0000
0.0000
0.0000
-1.6900
76.00
MIC-90-U
0.0000
-1.2100
10.5600
0.1300
0.0000
0.0000
95.00
0.0000
1.2200
-10.5600
0.1300
0.0000
0.0000
95.00
10.7830
1.2150
0.0000
0.0000
0.0000
1.9550
73.00
Support No.
(Design load)
Designation
Forces[kN]
Moments[kNm]
MIC-C90-D-
0.0000
1.2150
10.7230
-1.6900
0.0000
0.0000
MIC-C120-D-
0.0000
1.2150
10.7830
-1.9550
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
358
Contact:
Page:
7 of 10
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Stress:
Beam No. 1: MIC-C90-D-2000
Position
[m]
0.00
0.00
0.00
Actual
[kN/m]
76,630.000
-2,790.000
76,640.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
35.87
2.27
35.88
[m]
0.25
0.00
0.25
Actual
[kN/m]
112,060.000
27,620.000
114,030.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
52.46
22.39
53.37
[m]
0.00
0.00
0.00
Actual
[kN/m]
58,530.000
2,330.000
58,550.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
27.40
1.89
27.41
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
359
Contact:
Page:
8 of 10
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Displacement SLS1:
Beam No.
Value
Position [m]
u-X
u-Y
u-Z
[%]
Max. Displacement
1.50
0.0
3.4
0.1
45.16
Max. Displacement
0.00
0.0
0.6
0.0
23.24
Max. Displacement
1.50
0.0
2.8
0.0
37.41
Displacement [mm]
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Utilization
360
Contact:
Page:
9 of 10
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
(Design load)
Support load:
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
1.2150
10.7230
-1.6900
0.0000
0.0000
0.0000
1.2150
10.7830
-1.9550
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
361
Contact:
Page:
10 of 10
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
362
Contact:
Page:
1 of 10
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
363
Contact:
Page:
2 of 10
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Calculation factors:
Load type:
Seismic
LC1: g
LC2: q
LC3: Ex
Earthquake in X-direction
LC4: Ey
Earthquake in Y-direction
1.1
1.5
1.35
Load combinations:
ULS1 = 1.35*LC1+1.5*LC2
SLS1 = 1*LC1+1*LC2
200
150
1.5
Local
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
364
Contact:
Page:
3 of 10
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Parts List:
Channels
Description
Item
Pos
Qty
Girder MI-90 3m
304798
3.4
0.36
Bracket MIC-C120-D-2000
270472
31.1
1.54
Bracket MIC-C90-D-2000
267793
24.7
1.54
Item
Weight [kg]
Node No.
304803
5.0
2,3
Beam No.
Connections
Pos
Qty
Description
Connector MIC-90-U
Fixations
Description
Item
Pos
Qty
304888
371593
Fixation text
Accessories
Description
Item
Pos
Qty
432077
0.0
0.00
432078
0.0
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
365
Contact:
Page:
4 of 10
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Static model:
Node
Hinged axis
Connection
No.
0.0000
0.0000
0.0000
0.0000
0.0000
1.5000
Y,Z
MIC-90-U
0.5000
0.0000
1.5000
Y,Z
MIC-90-U
0.5000
0.0000
0.0000
Building material
MIC-C90-D-2000
Concrete
MIC-C120-D-2000
Concrete
Beams
Beam
Channel
No.
Length
Rotation
Iy
Iz
[m]
[]
[cm]
[cm]
[cm]
[kN/m]
MIC-C90-D-2000
1.50
180
1,003
115
115
210,000,000.
MI-90 3m
0.50
180
1,003
115
115
210,000,000.
MIC-C120-D-2000
1.50
1,376
266
174
210,000,000.
No.
Position
Forces [kN]
Moments [kNm]
Forces [kN]
[m]
Ex
Ey
0.25
1.6200
0.0000
14.0500
0.0000
0.0000
0.0000
0.0000
0.0000
Load description
No.
Type
Description
Size [mm]
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Span [m]
366
Contact:
Page:
5 of 10
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
No.
Date:
Type
Description
Size [mm]
Span [m]
01-Mar-15
Custom load
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
367
Contact:
Page:
6 of 10
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Calculation summary
1 Beams
(1) Connections
[1] Supports
Designation
Stress
[%]
[]
[%]
MIC-C90-D-2000
25.28
0.0
0.00
MI-90 3m
49.81
0.0
0.00
MIC-C120-D-
30.55
0.0
0.00
Beam No.
Torsion
(Design load)
Torsion
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MIC-C90-D-
10.7230
0.0000
0.7370
0.0000
-1.1060
0.0000
58.00
MIC-90-U
0.7400
0.0000
10.5600
0.0000
0.0000
0.0000
80.00
MIC-90-U
-1.6900
0.0000
-10.5600
0.0000
0.0000
0.0000
51.00
MIC-C120-D-
10.7830
0.0000
-1.6930
0.0000
2.5390
0.0000
89.00
Support No.
(Design load)
Designation
Forces[kN]
Moments[kNm]
MIC-C90-D-
0.7370
0.0000
10.7230
0.0000
1.1060
0.0000
MIC-C120-D-
1.6930
0.0000
10.7830
0.0000
2.5390
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
368
Contact:
Page:
7 of 10
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Stress:
Beam No. 1: MIC-C90-D-2000
Position
[m]
0.00
0.00
0.00
Actual
[kN/m]
54,000.000
-1,710.000
54,010.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
25.28
1.39
25.28
[m]
0.25
0.00
0.25
Actual
[kN/m]
-104,690.000
24,390.000
106,420.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
49.00
19.77
49.81
[m]
0.00
0.00
0.00
Actual
[kN/m]
65,240.000
2,540.000
65,260.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
30.54
2.06
30.55
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
369
Contact:
Page:
8 of 10
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Displacement SLS1:
Beam No.
Value
Position [m]
u-X
u-Y
u-Z
[%]
Max. Displacement
1.50
2.3
0.0
0.1
30.73
Max. Displacement
0.25
0.0
0.0
0.2
8.35
Max. Displacement
1.50
2.3
0.0
0.0
30.72
Displacement [mm]
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Utilization
370
Contact:
Page:
9 of 10
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
(Design load)
Support load:
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.7370
0.0000
10.7230
0.0000
1.1060
0.0000
1.6930
0.0000
10.7830
0.0000
2.5390
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
371
Contact:
Page:
10 of 10
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
372
Contact:
Page:
1 of 10
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
373
Contact:
Page:
2 of 10
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Calculation factors:
Load type:
Seismic
LC1: g
LC2: q
LC3: Ex
Earthquake in X-direction
LC4: Ey
Earthquake in Y-direction
1.1
1.5
1.35
Load combinations:
ULS1 = 1.35*LC1+1.5*LC2
SLS1 = 1*LC1+1*LC2
200
150
1.5
Local
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
374
Contact:
Page:
3 of 10
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Parts List:
Channels
Description
Item
Pos
Qty
Girder MI-90 3m
304798
3.4
0.36
Bracket MIC-C120-D-2000
270472
31.1
1.54
Bracket MIC-C90-D-2000
267793
24.7
1.54
Item
Weight [kg]
Node No.
304803
5.0
2,3
Beam No.
Connections
Pos
Qty
Description
Connector MIC-90-U
Fixations
Description
Item
Pos
Qty
304888
371593
Fixation text
Accessories
Description
Item
Pos
Qty
432077
0.0
0.00
432078
0.0
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
375
Contact:
Page:
4 of 10
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Static model:
Node
Hinged axis
Connection
No.
0.0000
0.0000
0.0000
0.0000
0.0000
1.5000
Y,Z
MIC-90-U
0.5000
0.0000
1.5000
Y,Z
MIC-90-U
0.5000
0.0000
0.0000
Building material
MIC-C90-D-2000
Concrete
MIC-C120-D-2000
Concrete
Beams
Beam
Channel
No.
Length
Rotation
Iy
Iz
[m]
[]
[cm]
[cm]
[cm]
[kN/m]
MIC-C90-D-2000
1.50
180
1,003
115
115
210,000,000.
MI-90 3m
0.50
180
1,003
115
115
210,000,000.
MIC-C120-D-2000
1.50
1,376
266
174
210,000,000.
No.
Position
Forces [kN]
Moments [kNm]
Forces [kN]
[m]
Ex
Ey
0.25
0.0000
1.6200
18.8000
0.0000
0.0000
0.0000
0.0000
0.0000
Load description
No.
Type
Description
Size [mm]
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Span [m]
376
Contact:
Page:
5 of 10
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
No.
Date:
Type
Description
Size [mm]
Span [m]
01-Mar-15
Custom load
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
377
Contact:
Page:
6 of 10
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Calculation summary
1 Beams
(1) Connections
[1] Supports
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MIC-C90-D-2000
37.55
0.0
0.00
MI-90 3m
69.91
0.0
0.00
MIC-C120-D-
28.63
0.0
0.00
(Design load)
Beam No.
MIC-90-U
MIC-C120-D-
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MIC-C90-D-
14.2860
-1.2150
0.0000
0.0000
0.0000
-1.6900
84.00
MIC-90-U
0.0000
-1.2100
14.1300
0.1300
0.0000
0.0000
95.00
0.0000
1.2200
-14.1300
0.1300
0.0000
0.0000
95.00
14.3450
1.2150
0.0000
0.0000
0.0000
1.9550
80.00
Support No.
(Design load)
Designation
Forces[kN]
Moments[kNm]
MIC-C90-D-
0.0000
1.2150
14.2860
-1.6900
0.0000
0.0000
MIC-C120-D-
0.0000
1.2150
14.3450
-1.9550
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
378
Contact:
Page:
7 of 10
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Stress:
Beam No. 1: MIC-C90-D-2000
Position
[m]
0.00
0.00
0.00
Actual
[kN/m]
80,190.000
-2,790.000
80,220.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
37.54
2.27
37.55
[m]
0.25
0.00
0.25
Actual
[kN/m]
146,790.000
35,860.000
149,340.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
68.71
29.08
69.91
[m]
0.00
0.00
0.00
Actual
[kN/m]
61,110.000
2,330.000
61,160.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
28.61
1.89
28.63
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
379
Contact:
Page:
8 of 10
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Displacement SLS1:
Beam No.
Value
Position [m]
u-X
u-Y
u-Z
[%]
Max. Displacement
1.50
0.0
3.4
0.1
45.16
Max. Displacement
0.00
0.0
0.6
0.0
23.24
Max. Displacement
1.50
0.0
2.8
0.0
37.41
Displacement [mm]
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Utilization
380
Contact:
Page:
9 of 10
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
(Design load)
Support load:
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
1.2150
14.2860
-1.6900
0.0000
0.0000
0.0000
1.2150
14.3450
-1.9550
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
381
Contact:
Page:
10 of 10
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
382
Contact:
Page:
1 of 10
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
383
Contact:
Page:
2 of 10
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Calculation factors:
Load type:
Seismic
LC1: g
LC2: q
LC3: Ex
Earthquake in X-direction
LC4: Ey
Earthquake in Y-direction
1.1
1.5
1.35
Load combinations:
ULS1 = 1.35*LC1+1.5*LC2
SLS1 = 1*LC1+1*LC2
200
150
1.5
Local
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
384
Contact:
Page:
3 of 10
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Parts List:
Channels
Description
Item
Pos
Qty
Girder MI-90 3m
304798
3.4
0.36
Bracket MIC-C120-D-2000
270472
31.1
1.54
Bracket MIC-C90-D-2000
267793
24.7
1.54
Item
Weight [kg]
Node No.
304803
5.0
2,3
Beam No.
Connections
Pos
Qty
Description
Connector MIC-90-U
Fixations
Description
Item
Pos
Qty
304888
371593
Fixation text
Accessories
Description
Item
Pos
Qty
432077
0.0
0.00
432078
0.0
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
385
Contact:
Page:
4 of 10
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Static model:
Node
Hinged axis
Connection
No.
0.0000
0.0000
0.0000
0.0000
0.0000
1.5000
Y,Z
MIC-90-U
0.5000
0.0000
1.5000
Y,Z
MIC-90-U
0.5000
0.0000
0.0000
Building material
MIC-C90-D-2000
Concrete
MIC-C120-D-2000
Concrete
Beams
Beam
Channel
No.
Length
Rotation
Iy
Iz
[m]
[]
[cm]
[cm]
[cm]
[kN/m]
MIC-C90-D-2000
1.50
180
1,003
115
115
210,000,000.
MI-90 3m
0.50
180
1,003
115
115
210,000,000.
MIC-C120-D-2000
1.50
1,376
266
174
210,000,000.
No.
Position
Forces [kN]
Moments [kNm]
Forces [kN]
[m]
Ex
Ey
0.25
1.6200
0.0000
18.8000
0.0000
0.0000
0.0000
0.0000
0.0000
Load description
No.
Type
Description
Size [mm]
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Span [m]
386
Contact:
Page:
5 of 10
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
No.
Date:
Type
Description
Size [mm]
Span [m]
01-Mar-15
Custom load
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
387
Contact:
Page:
6 of 10
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Calculation summary
1 Beams
(1) Connections
[1] Supports
Designation
Stress
[%]
[]
[%]
MIC-C90-D-2000
26.95
0.0
0.00
MI-90 3m
66.34
0.0
0.00
MIC-C120-D-
31.76
0.0
0.00
Beam No.
Torsion
(Design load)
Torsion
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MIC-C90-D-
14.2860
0.0000
0.7370
0.0000
-1.1060
0.0000
66.00
MIC-90-U
0.7400
0.0000
14.1300
0.0000
0.0000
0.0000
98.00
MIC-90-U
-1.6900
0.0000
-14.1300
0.0000
0.0000
0.0000
69.00
MIC-C120-D-
14.3450
0.0000
-1.6930
0.0000
2.5390
0.0000
96.00
Support No.
(Design load)
Designation
Forces[kN]
Moments[kNm]
MIC-C90-D-
0.7370
0.0000
14.2860
0.0000
1.1060
0.0000
MIC-C120-D-
1.6930
0.0000
14.3450
0.0000
2.5390
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
388
Contact:
Page:
7 of 10
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Stress:
Beam No. 1: MIC-C90-D-2000
Position
[m]
0.00
0.00
0.00
Actual
[kN/m]
57,560.000
-1,710.000
57,570.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
26.94
1.39
26.95
[m]
0.25
0.00
0.25
Actual
[kN/m]
-139,410.000
32,630.000
141,740.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
65.26
26.46
66.34
[m]
0.00
0.00
0.00
Actual
[kN/m]
67,830.000
2,540.000
67,850.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
31.75
2.06
31.76
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
389
Contact:
Page:
8 of 10
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Displacement SLS1:
Beam No.
Value
Position [m]
u-X
u-Y
u-Z
[%]
Max. Displacement
1.50
2.3
0.0
0.1
30.73
Max. Displacement
0.25
0.0
0.0
0.3
11.17
Max. Displacement
1.50
2.3
0.0
0.0
30.72
Displacement [mm]
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Utilization
390
Contact:
Page:
9 of 10
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
(Design load)
Support load:
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.7370
0.0000
14.2860
0.0000
1.1060
0.0000
1.6930
0.0000
14.3450
0.0000
2.5390
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
391
Contact:
Page:
10 of 10
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
01-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
392
Contact:
Page:
1 of 11
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
393
Contact:
Page:
2 of 11
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Calculation factors:
Load type:
Design load
LC1: g
LC2: q
1.1
1.5
1.35
Load combinations:
ULS1 = 1.35*LC1+1*LC2
SLS1 = (LC1+LC2)/1.5
Maximum beam allowable deflection:
200
150
1.5
Local
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
394
Contact:
Page:
3 of 11
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Parts List:
Channels
Description
Item
Pos
Qty
Girder MI-120 6m
304801
7.2
0.57
Bracket MIC-C90-D-2000
267793
49.5
1.67
Item
Weight [kg]
Node No.
304804
5.6
2,3
Beam No.
Connections
Pos
Qty
Description
Connector MIC-120-U
Fixations
Pos
Qty
Description
Safety stud anchor HST M16X140/25
Item
Fixation text
371593
Accessories
Pos
Qty
Description
Girder end cap MIA-EC90
Item
432077
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
0.0
0.00
395
Contact:
Page:
4 of 11
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Static model:
Node
Hinged axis
Connection
No.
0.0000
0.0000
0.0000
0.0000
0.0000
1.5000
Y,Z
MIC-120-U
0.7000
0.0000
1.5000
Y,Z
MIC-120-U
0.7000
0.0000
0.0000
Building material
MIC-C90-D-2000
Concrete
MIC-C90-D-2000
Concrete
Beams
Beam
Channel
No.
Length
Rotation
Iy
Iz
[m]
[]
[cm]
[cm]
[cm]
[kN/m]
MIC-C90-D-2000
1.50
1,003
115
115
210,000,000.
MI-120 6m
0.70
1,376
266
174
210,000,000.
MIC-C90-D-2000
1.50
180
1,003
115
115
210,000,000.
No.
Position
Forces [kN]
Moments [kNm]
[m]
0.35
0.0000
1.3400
23.3250
0.0000
0.0000
0.0000
Load description
No.
Type
Description
Size [mm]
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Span [m]
396
Contact:
Page:
5 of 11
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
No.
Date:
Type
Description
Size [mm]
Span [m]
09-Mar-15
Custom load
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
397
Contact:
Page:
6 of 11
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Calculation summary
1 Beams
(1) Connections
[1] Supports
Beams:
Designation
Beam No.
Deflection
Deflection
Stress
Torsion
Torsion
[mm]
[%]
[%]
[]
[%]
MIC-C90-D-2000
2.1
27.92
23.81
0.0
0.00
MI-120 6m
0.2
7.05
45.69
0.0
0.00
MIC-C90-D-2000
2.1
27.92
23.81
0.0
0.00
(Design load)
Beam No.
Forces[kN]
Designation
Moments[kNm]
Z
Utilization[%]
MIC-C90-D-
11.8730
0.6700
0.0000
0.0000
0.0000
1.0050
57.00
MIC-120-U
0.0000
0.6700
-11.7100
0.0000
0.0000
0.0000
65.00
MIC-120-U
0.0000
-0.6700
11.7100
0.0000
0.0000
0.0000
65.00
MIC-C90-D-
11.8730
-0.6700
0.0000
0.0000
0.0000
-1.0050
57.00
Support No.
(Design load)
Designation
Forces[kN]
Moments[kNm]
MIC-C90-D-
0.0000
0.6700
11.8730
-1.0050
0.0000
0.0000
MIC-C90-D-
0.0000
0.6700
11.8730
-1.0050
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
398
Contact:
Page:
7 of 11
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Stress:
Beam No. 1: MIC-C90-D-2000
Position
[m]
0.00
0.00
0.00
Actual
[kN/m]
50,860.000
1,550.000
50,860.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
23.80
1.25
23.81
[m]
0.35
0.00
0.35
Actual
[kN/m]
-97,010.000
-17,560.000
97,610.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
45.41
14.24
45.69
[m]
0.00
0.00
0.00
Actual
[kN/m]
50,860.000
-1,550.000
50,860.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
23.80
1.25
23.81
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
399
Contact:
Page:
8 of 11
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Displacement:
Beam No.
Value
Position [m]
u-X
u-Y
u-Z
[%]
Max. Displacement
1.50
0.0
2.1
0.1
27.92
Max. Displacement
0.35
0.0
0.0
0.2
7.05
Max. Displacement
1.50
0.0
2.1
0.1
27.92
Displacement [mm]
Utilization
Displacement
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
400
Contact:
Page:
9 of 11
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
(Design load)
Support load:
Support
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
0.6700
11.8730
-1.0050
0.0000
0.0000
0.0000
0.6700
11.8730
-1.0050
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
401
Contact:
Page:
10 of 11
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Section load:
Beam
Value
Unit
Q-2
Q-3
M-2
M-3
Value
[kN] / [kNm]
11.8700
0.6700
0.0000
0.0000
0.0000
1.0000
Position
[m]
0.00
0.00
0.00
0.00
0.00
0.00
No.
1
09-Mar-15
Forces
N
Moments
Value
[kN] / [kNm]
0.0000
0.6700
11.7100
0.0000
4.0900
-0.2300
Position
[m]
0.00
0.00
0.00
0.00
0.35
0.35
Value
[kN] / [kNm]
11.8700
-0.6700
0.0000
0.0000
0.0000
-1.0000
Position
[m]
0.00
0.00
0.00
0.00
0.00
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
402
Contact:
Page:
11 of 11
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
403
Contact:
Page:
1 of 11
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
404
Contact:
Page:
2 of 11
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Calculation factors:
Load type:
Design load
LC1: g
LC2: q
1.1
1.5
1.35
Load combinations:
ULS1 = 1.35*LC1+1*LC2
SLS1 = (LC1+LC2)/1.5
Maximum beam allowable deflection:
200
150
1.5
Local
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
405
Contact:
Page:
3 of 11
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Parts List:
Channels
Description
Item
Pos
Qty
Girder MI-120 6m
304801
7.2
0.57
Bracket MIC-C90-D-2000
267793
49.5
1.67
Item
Weight [kg]
Node No.
304804
5.6
2,3
Beam No.
Connections
Pos
Qty
Description
Connector MIC-120-U
Fixations
Pos
Qty
Description
Safety stud anchor HST M16X140/25
Item
Fixation text
371593
Accessories
Pos
Qty
Description
Girder end cap MIA-EC90
Item
432077
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
0.0
0.00
406
Contact:
Page:
4 of 11
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Static model:
Node
Hinged axis
Connection
No.
0.0000
0.0000
0.0000
0.0000
0.0000
1.5000
Y,Z
MIC-120-U
0.7000
0.0000
1.5000
Y,Z
MIC-120-U
0.7000
0.0000
0.0000
Building material
MIC-C90-D-2000
Concrete
MIC-C90-D-2000
Concrete
Beams
Beam
Channel
No.
Length
Rotation
Iy
Iz
[m]
[]
[cm]
[cm]
[cm]
[kN/m]
MIC-C90-D-2000
1.50
1,003
115
115
210,000,000.
MI-120 6m
0.70
1,376
266
174
210,000,000.
MIC-C90-D-2000
1.50
180
1,003
115
115
210,000,000.
No.
Position
Forces [kN]
Moments [kNm]
[m]
0.35
1.3400
0.0000
23.3250
0.0000
0.0000
0.0000
Load description
No.
Type
Description
Size [mm]
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Span [m]
407
Contact:
Page:
5 of 11
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
No.
Date:
Type
Description
Size [mm]
Span [m]
09-Mar-15
Custom load
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
408
Contact:
Page:
6 of 11
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Calculation summary
1 Beams
(1) Connections
[1] Supports
Beams:
Designation
Beam No.
Deflection
Deflection
Stress
Torsion
Torsion
[mm]
[%]
[%]
[]
[%]
MIC-C90-D-2000
2.1
27.92
23.81
0.0
0.00
MI-120 6m
0.2
7.05
43.88
0.0
0.00
MIC-C90-D-2000
2.1
27.92
23.81
0.0
0.00
(Design load)
Beam No.
Forces[kN]
Designation
Moments[kNm]
Z
Utilization[%]
MIC-C90-D-
11.8730
0.0000
-0.6700
0.0000
1.0050
0.0000
57.00
MIC-120-U
0.6700
0.0000
-11.7100
0.0000
0.0000
0.0000
83.00
MIC-120-U
-0.6700
0.0000
11.7100
0.0000
0.0000
0.0000
65.00
MIC-C90-D-
11.8730
0.0000
0.6700
0.0000
-1.0050
0.0000
57.00
Support No.
(Design load)
Designation
Forces[kN]
Moments[kNm]
MIC-C90-D-
0.6700
0.0000
11.8730
0.0000
1.0050
0.0000
MIC-C90-D-
0.6700
0.0000
11.8730
0.0000
1.0050
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
409
Contact:
Page:
7 of 11
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Stress:
Beam No. 1: MIC-C90-D-2000
Position
[m]
0.00
0.00
0.00
Actual
[kN/m]
50,860.000
1,550.000
50,860.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
23.80
1.25
23.81
[m]
0.35
0.00
0.35
Actual
[kN/m]
-92,920.000
-17,610.000
93,730.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
43.50
14.28
43.88
[m]
0.00
0.00
0.00
Actual
[kN/m]
50,860.000
-1,550.000
50,860.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
23.80
1.25
23.81
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
410
Contact:
Page:
8 of 11
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Displacement:
Beam No.
Value
Position [m]
u-X
u-Y
u-Z
[%]
Max. Displacement
1.50
2.1
0.0
0.1
27.92
Max. Displacement
0.35
0.0
0.0
0.2
7.05
Max. Displacement
1.50
2.1
0.0
0.1
27.92
Displacement [mm]
Utilization
Displacement
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
411
Contact:
Page:
9 of 11
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
(Design load)
Support load:
Support
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.6700
0.0000
11.8730
0.0000
1.0050
0.0000
0.6700
0.0000
11.8730
0.0000
1.0050
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
412
Contact:
Page:
10 of 11
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Section load:
Beam
Value
Unit
Q-2
Q-3
M-2
M-3
Value
[kN] / [kNm]
11.8700
0.0000
-0.6700
0.0000
1.0000
0.0000
Position
[m]
0.00
0.00
0.00
0.00
0.00
0.00
No.
1
09-Mar-15
Forces
N
Moments
Value
[kN] / [kNm]
0.6700
0.0000
11.7100
0.0000
4.0900
0.0000
Position
[m]
0.00
0.00
0.00
0.00
0.35
0.00
Value
[kN] / [kNm]
11.8700
0.0000
0.6700
0.0000
-1.0000
0.0000
Position
[m]
0.00
0.00
0.00
0.00
0.00
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
413
Contact:
Page:
11 of 11
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
414
Seismic support
(Suspension 2.0m)
www.hilti.sa
sa.tso@hilti.com
IS-HN-D1278-2015
415
Contact:
Page:
1 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
416
Contact:
Page:
2 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Calculation factors:
Load type:
Seismic
LC1: g
LC2: q
LC3: Ex
Earthquake in X-direction
LC4: Ey
Earthquake in Y-direction
1.1
1.5
1.35
Load combinations:
ULS1 = 1.35*LC1+1.5*LC2
SLS1 = 1*LC1+1*LC2
ULS2 = 1*LC1+1*LC2+1*LC4
ULS3 = 1*LC1+1*LC2-1*LC4
ULS4 = 1*LC1+1*LC2+0.3*LC4
ULS5 = 1*LC1+1*LC2-0.3*LC4
Maximum beam allowable deflection:
200
150
1.5
Local
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
417
Contact:
Page:
3 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Parts List:
Channels
Description
Item
Pos
Qty
369591
369591
Item
Weight [kg]
Node No.
369585
3.1
Beam No.
1.17
4,5
8.3
2.08
1,3
0.9
0.42
Connections
Description
Pos
Qty
369660
0.8
6,8
369649
0.7
5,7
369651
2.5
1,4
369658
0.5
2,3
Fixations
Description
Item
Pos
Qty
20
369623
371587
Fixation text
Accessories
Pos
Qty
10
Description
Channel end cap MQZ-E41
Item
369685
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
0.0
0.00
418
Contact:
Page:
4 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Static model:
Node
Hinged axis
Connection
No.
0.0000
0.0000
0.0000
0.0000
0.0000
2.0000
Y,Z
MQW-4
0.4640
0.0000
2.0000
Y,Z
MQW-4
0.4640
0.0000
0.0000
0.0000
-0.9000
0.0000
X,Y,Z
0.0000
0.0000
0.9000
X,Z
0.4640
-0.9000
0.0000
X,Y,Z
0.4640
0.0000
0.9000
X,Z
MQP-21-72
Building material
Concrete
MQP-21-72
Concrete
MQP-45
Concrete
MQW-8/45 r
MQP-45
Concrete
MQW-8/45 r
Beams
Beam
Channel
No.
Length
Rotation
Iy
Iz
[m]
[]
[cm]
[cm]
[cm]
[kN/m]
MQ-41 3m
2.00
180
2.451
5.3744
7.3341
210,000,000.
MQ-41 3m
0.46
2.451
5.3744
7.3341
210,000,000.
MQ-41 3m
2.00
2.451
5.3744
7.3341
210,000,000.
MQ-21 6m
1.27
1.653
0.9174
4.3914
210,000,000.
MQ-21 6m
1.27
1.653
0.9174
4.3914
210,000,000.
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
419
Contact:
Page:
5 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Point loads
No.
No.
1
2
Position
Forces [kN]
Moments [kNm]
Forces [kN]
[m]
Ex
Ey
0.12
0.0000
0.0000
0.8750
0.0000
0.0000
0.0000
0.0000
0.1000
0.35
0.0000
0.0000
0.8750
0.0000
0.0000
0.0000
0.0000
0.1000
Load description
No.
Type
Custom load
Custom load
Description
Size [mm]
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Span [m]
420
Contact:
Page:
6 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Calculation summary
1 Beams
(1) Connections
[1] Supports
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-41 3m
2.26
0.0
0.00
MQ-41 3m
25.84
0.0
0.00
MQ-41 3m
2.33
0.0
0.00
MQ-21 6m
0.12
0.0
0.00
MQ-21 6m
0.12
0.0
0.00
Beam No.
3
4
(Design load)
Designation
Forces[kN]
Moments[kNm]
Utilization[%]
MQP-21-72
1.3630
0.0010
0.0000
0.0000
0.0000
0.0010
11.00
MQW-4
0.0000
0.0000
1.3000
0.0000
0.0000
0.0000
19.00
MQW-4
0.0000
0.0000
1.3400
0.0000
0.0000
0.0000
19.00
MQP-21-72
1.3970
-0.0020
0.0000
0.0000
0.0000
-0.0010
11.00
MQP-45
0.0100
0.0000
0.0100
0.0000
0.0000
0.0000
7.00
MQW-8/45 r
-0.0100
0.0000
-0.0100
0.0000
0.0000
0.0000
7.00
MQP-45
0.0100
0.0000
0.0100
0.0000
0.0000
0.0000
7.00
MQW-8/45 r
-0.0100
0.0000
-0.0100
0.0000
0.0000
0.0000
7.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
421
Contact:
Page:
7 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Support No.
5
7
09-Mar-15
Forces[kN]
Designation
Moments[kNm]
MQP-21-72
0.0000
-0.0010
1.3630
0.0010
0.0000
0.0000
MQP-21-72
0.0000
-0.0020
1.3970
0.0010
0.0000
0.0000
MQP-45
0.0000
0.0010
0.0130
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0020
0.0130
0.0000
0.0000
0.0000
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-41 3m
14.12
0.0
0.00
MQ-41 3m
17.16
0.0
0.00
MQ-41 3m
14.15
0.0
0.00
MQ-21 6m
0.92
0.0
0.00
MQ-21 6m
0.95
0.0
0.00
(Design load)
Beam No.
2
3
Designation
Forces[kN]
Moments[kNm]
Utilization[%]
MQP-21-72
0.6390
0.1770
0.0000
0.0000
0.0000
0.0510
89.00
MQW-4
0.0000
0.1000
0.8700
0.0000
0.0000
0.0000
28.00
MQW-4
0.0000
0.1000
0.8900
0.0000
0.0000
0.0000
29.00
MQP-21-72
0.6540
-0.1820
0.0000
0.0000
0.0000
-0.0520
90.00
MQP-45
0.4000
0.0000
0.0100
0.0000
0.0000
0.0000
13.00
MQW-8/45 r
0.3800
0.0000
-0.0100
0.0000
0.0000
0.0000
16.00
MQP-45
0.4100
0.0000
0.0100
0.0000
0.0000
0.0000
13.00
MQW-8/45 r
0.3900
0.0000
-0.0100
0.0000
0.0000
0.0000
16.00
Support No.
5
7
(Design load)
Designation
Forces[kN]
Moments[kNm]
MQP-21-72
0.0000
-0.1770
0.6390
0.0510
0.0000
0.0000
MQP-21-72
0.0000
-0.1820
0.6540
0.0520
0.0000
0.0000
MQP-45
0.0000
0.2760
0.2840
0.0000
0.0000
0.0000
MQP-45
0.0000
0.2830
0.2920
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
422
Contact:
Page:
8 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Designation
Torsion
Stress
Torsion
[%]
[]
[%]
MQ-41 3m
14.64
0.0
0.00
MQ-41 3m
17.16
0.0
0.00
MQ-41 3m
14.69
0.0
0.00
MQ-21 6m
0.90
0.0
0.00
MQ-21 6m
0.92
0.0
0.00
(Design load)
Beam No.
3
4
5
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MQP-21-72
1.1890
-0.1750
0.0000
0.0000
0.0000
-0.0490
85.00
MQW-4
0.0000
-0.1000
0.8700
0.0000
0.0000
0.0000
28.00
MQW-4
0.0000
-0.1000
0.8900
0.0000
0.0000
0.0000
29.00
MQP-21-72
1.2190
0.1800
0.0000
0.0000
0.0000
0.0510
89.00
MQP-45
-0.3800
0.0000
0.0100
0.0000
0.0000
0.0000
11.00
MQW-8/45 r
-0.3900
0.0000
-0.0100
0.0000
0.0000
0.0000
16.00
MQP-45
-0.3900
0.0000
0.0100
0.0000
0.0000
0.0000
11.00
MQW-8/45 r
-0.4000
0.0000
-0.0100
0.0000
0.0000
0.0000
16.00
(Design load)
Forces[kN]
Moments[kNm]
Node No.
Support No.
MQP-21-72
0.0000
0.1750
1.1890
-0.0490
0.0000
0.0000
MQP-21-72
0.0000
0.1800
1.2190
-0.0510
0.0000
0.0000
MQP-45
0.0000
-0.2740
-0.2660
0.0000
0.0000
0.0000
MQP-45
0.0000
-0.2810
-0.2730
0.0000
0.0000
0.0000
Designation
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-41 3m
4.93
0.0
0.00
MQ-41 3m
16.18
0.0
0.00
MQ-41 3m
4.96
0.0
0.00
MQ-21 6m
0.30
0.0
0.00
MQ-21 6m
0.32
0.0
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
423
Contact:
Page:
9 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Beam No.
3
4
09-Mar-15
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MQP-21-72
0.8310
0.0540
0.0000
0.0000
0.0000
0.0160
28.00
MQW-4
0.0000
0.0300
0.8700
0.0000
0.0000
0.0000
17.00
MQW-4
0.0000
0.0300
0.8900
0.0000
0.0000
0.0000
17.00
MQP-21-72
0.8520
-0.0550
0.0000
0.0000
0.0000
-0.0160
28.00
MQP-45
0.1200
0.0000
0.0100
0.0000
0.0000
0.0000
9.00
MQW-8/45 r
0.1100
0.0000
-0.0100
0.0000
0.0000
0.0000
9.00
MQP-45
0.1300
0.0000
0.0100
0.0000
0.0000
0.0000
9.00
MQW-8/45 r
0.1200
0.0000
-0.0100
0.0000
0.0000
0.0000
10.00
(Design load)
Support No.
4
5
7
Forces[kN]
Designation
Moments[kNm]
MQP-21-72
0.0000
-0.0540
0.8310
0.0160
0.0000
0.0000
MQP-21-72
0.0000
-0.0550
0.8520
0.0160
0.0000
0.0000
MQP-45
0.0000
0.0840
0.0920
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0860
0.0940
0.0000
0.0000
0.0000
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-41 3m
5.09
0.0
0.00
MQ-41 3m
16.18
0.0
0.00
MQ-41 3m
5.14
0.0
0.00
MQ-21 6m
0.30
0.0
0.00
MQ-21 6m
0.30
0.0
0.00
Beam No.
2
3
(Design load)
Designation
Forces[kN]
Moments[kNm]
Utilization[%]
MQP-21-72
0.9960
-0.0520
0.0000
0.0000
0.0000
-0.0140
24.00
MQW-4
0.0000
-0.0300
0.8700
0.0000
0.0000
0.0000
17.00
MQW-4
0.0000
-0.0300
0.8900
0.0000
0.0000
0.0000
17.00
MQP-21-72
1.0210
0.0530
0.0000
0.0000
0.0000
0.0150
26.00
MQP-45
-0.1100
0.0000
0.0100
0.0000
0.0000
0.0000
8.00
MQW-8/45 r
-0.1200
0.0000
-0.0100
0.0000
0.0000
0.0000
10.00
MQP-45
-0.1100
0.0000
0.0100
0.0000
0.0000
0.0000
8.00
MQW-8/45 r
-0.1200
0.0000
-0.0100
0.0000
0.0000
0.0000
10.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
424
Contact:
Page:
10 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
Support No.
5
7
09-Mar-15
(Design load)
Designation
Forces[kN]
Moments[kNm]
MQP-21-72
0.0000
0.0520
0.9960
-0.0140
0.0000
0.0000
MQP-21-72
0.0000
0.0530
1.0210
-0.0150
0.0000
0.0000
MQP-45
0.0000
-0.0820
-0.0730
0.0000
0.0000
0.0000
MQP-45
0.0000
-0.0840
-0.0750
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
425
Contact:
Page:
11 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Stress:
Beam No. 1: MQ-41 3m
Position
[m]
0.90
0.00
0.90
Actual
[kN/m]
35,740.000
2,550.000
35,930.000
Limit
[kN/m]
245,450.000
141,710.000
245,450.000
Utilization
[%]
14.56
1.80
14.64
[m]
0.12
0.46
0.12
Actual
[kN/m]
62,920.000
-11,400.000
63,420.000
Limit
[kN/m]
245,450.000
141,710.000
245,450.000
Utilization
[%]
25.63
8.04
25.84
[m]
0.90
0.00
0.90
Actual
[kN/m]
35,870.000
-2,550.000
36,050.000
Limit
[kN/m]
245,450.000
141,710.000
245,450.000
Utilization
[%]
14.61
1.80
14.69
[m]
0.00
0.00
0.00
Actual
[kN/m]
2,420.000
170.000
2,420.000
Limit
[kN/m]
263,640.000
152,210.000
263,640.000
Utilization
[%]
0.92
0.11
0.92
[m]
0.00
0.00
0.00
Actual
[kN/m]
2,480.000
170.000
2,490.000
Limit
[kN/m]
263,640.000
152,210.000
263,640.000
Utilization
[%]
0.94
0.11
0.95
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
426
Contact:
Page:
12 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Displacement SLS1:
Beam No.
Value
Position [m]
Max. Displacement
2.00
Displacement [mm]
Utilization
u-X
u-Y
u-Z
[%]
0.0
0.0
0.0
0.52
Max. Displacement
0.23
0.0
0.0
0.2
10.13
Max. Displacement
2.00
0.0
0.0
0.0
0.53
Max. Displacement
0.64
0.0
-0.1
0.1
1.94
Max. Displacement
0.64
0.0
-0.1
0.1
1.94
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
427
Contact:
Page:
13 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
(Design load)
Support load:
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
-0.0010
1.3630
0.0010
0.0000
0.0000
0.0000
-0.0020
1.3970
0.0010
0.0000
0.0000
0.0000
0.0010
0.0130
0.0000
0.0000
0.0000
0.0000
0.0020
0.0130
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
-0.1770
0.6390
0.0510
0.0000
0.0000
0.0000
-0.1820
0.6540
0.0520
0.0000
0.0000
0.0000
0.2760
0.2840
0.0000
0.0000
0.0000
0.0000
0.2830
0.2920
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
0.1750
1.1890
-0.0490
0.0000
0.0000
0.0000
0.1800
1.2190
-0.0510
0.0000
0.0000
0.0000
-0.2740
-0.2660
0.0000
0.0000
0.0000
0.0000
-0.2810
-0.2730
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
428
Contact:
Page:
14 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
-0.0540
0.8310
0.0160
0.0000
0.0000
0.0000
-0.0550
0.8520
0.0160
0.0000
0.0000
0.0000
0.0840
0.0920
0.0000
0.0000
0.0000
0.0000
0.0860
0.0940
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
0.0520
0.9960
-0.0140
0.0000
0.0000
0.0000
0.0530
1.0210
-0.0150
0.0000
0.0000
0.0000
-0.0820
-0.0730
0.0000
0.0000
0.0000
0.0000
-0.0840
-0.0750
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
429
Contact:
Page:
15 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
430
Contact:
Page:
1 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
431
Contact:
Page:
2 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Calculation factors:
Load type:
Seismic
LC1: g
LC2: q
LC3: Ex
Earthquake in X-direction
LC4: Ey
Earthquake in Y-direction
1.1
1.5
1.35
Load combinations:
ULS1 = 1.35*LC1+1.5*LC2
SLS1 = 1*LC1+1*LC2
ULS2 = 1*LC1+1*LC2+1*LC3
ULS3 = 1*LC1+1*LC2-1*LC3
ULS4 = 1*LC1+1*LC2+0.3*LC3
ULS5 = 1*LC1+1*LC2-0.3*LC3
Maximum beam allowable deflection:
200
150
1.5
Local
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
432
Contact:
Page:
3 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Parts List:
Channels
Description
Item
Pos
Qty
369585
3.1
1.17
369591
0.9
0.42
369591
8.3
2.08
1,3
Item
Weight [kg]
Node No.
Beam No.
4,5
Connections
Description
Pos
Qty
369660
0.8
6,8
369649
0.7
5,7
369651
2.5
1,4
369658
0.5
2,3
Fixations
Description
Item
Pos
Qty
20
369623
371587
Fixation text
Accessories
Pos
Qty
10
Description
Channel end cap MQZ-E41
Item
369685
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
0.0
0.00
433
Contact:
Page:
4 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Static model:
Node
Hinged axis
Connection
No.
0.0000
0.0000
0.0000
0.0000
0.0000
2.0000
Y,Z
MQW-4
0.4640
0.0000
2.0000
Y,Z
MQW-4
0.4640
0.0000
0.0000
0.0000
-0.9000
0.0000
X,Y,Z
0.0000
0.0000
0.9000
X,Z
0.4640
-0.9000
0.0000
X,Y,Z
0.4640
0.0000
0.9000
X,Z
MQP-21-72
Building material
Concrete
MQP-21-72
Concrete
MQP-45
Concrete
MQW-8/45 r
MQP-45
Concrete
MQW-8/45 r
Beams
Beam
Channel
No.
Length
Rotation
Iy
Iz
[m]
[]
[cm]
[cm]
[cm]
[kN/m]
MQ-41 3m
2.00
180
2.451
5.3744
7.3341
210,000,000.
MQ-41 3m
0.46
2.451
5.3744
7.3341
210,000,000.
MQ-41 3m
2.00
2.451
5.3744
7.3341
210,000,000.
MQ-21 6m
1.27
1.653
0.9174
4.3914
210,000,000.
MQ-21 6m
1.27
1.653
0.9174
4.3914
210,000,000.
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
434
Contact:
Page:
5 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Point loads
No.
No.
1
2
Position
Forces [kN]
Moments [kNm]
Forces [kN]
[m]
Ex
Ey
0.12
0.0000
0.0000
0.8750
0.0000
0.0000
0.0000
0.1000
0.0000
0.35
0.0000
0.0000
0.8750
0.0000
0.0000
0.0000
0.1000
0.0000
Load description
No.
Type
Custom load
Custom load
Description
Size [mm]
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Span [m]
435
Contact:
Page:
6 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Calculation summary
1 Beams
(1) Connections
[1] Supports
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-41 3m
2.26
0.0
0.00
MQ-41 3m
25.84
0.0
0.00
MQ-41 3m
2.33
0.0
0.00
MQ-21 6m
0.12
0.0
0.00
MQ-21 6m
0.12
0.0
0.00
Beam No.
3
4
(Design load)
Designation
Forces[kN]
Moments[kNm]
Utilization[%]
MQP-21-72
1.3630
0.0010
0.0000
0.0000
0.0000
0.0010
11.00
MQW-4
0.0000
0.0000
1.3000
0.0000
0.0000
0.0000
19.00
MQW-4
0.0000
0.0000
1.3400
0.0000
0.0000
0.0000
19.00
MQP-21-72
1.3970
-0.0020
0.0000
0.0000
0.0000
-0.0010
11.00
MQP-45
0.0100
0.0000
0.0100
0.0000
0.0000
0.0000
7.00
MQW-8/45 r
-0.0100
0.0000
-0.0100
0.0000
0.0000
0.0000
7.00
MQP-45
0.0100
0.0000
0.0100
0.0000
0.0000
0.0000
7.00
MQW-8/45 r
-0.0100
0.0000
-0.0100
0.0000
0.0000
0.0000
7.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
436
Contact:
Page:
7 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Support No.
5
7
09-Mar-15
Forces[kN]
Designation
Moments[kNm]
MQP-21-72
0.0000
-0.0010
1.3630
0.0010
0.0000
0.0000
MQP-21-72
0.0000
-0.0020
1.3970
0.0010
0.0000
0.0000
MQP-45
0.0000
0.0010
0.0130
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0020
0.0130
0.0000
0.0000
0.0000
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-41 3m
32.09
0.0
0.00
MQ-41 3m
16.33
0.0
0.00
MQ-41 3m
33.60
0.0
0.00
MQ-21 6m
0.12
0.0
0.00
MQ-21 6m
0.12
0.0
0.00
(Design load)
Beam No.
Forces[kN]
Designation
MQP-21-72
Moments[kNm]
0.9140
0.0010
0.1000
0.0000
-0.2000
0.0010
Utilization[%]
41.00
MQW-4
0.1000
0.0000
0.8700
0.0000
0.0000
0.0000
14.00
MQW-4
-0.1000
0.0000
0.8900
0.0000
0.0000
0.0000
14.00
MQP-21-72
0.9360
-0.0010
-0.1000
0.0000
0.2000
-0.0010
42.00
MQP-45
0.0100
0.0000
0.0100
0.0000
0.0000
0.0000
7.00
MQW-8/45 r
0.0000
0.0000
-0.0100
0.0000
0.0000
0.0000
7.00
MQP-45
0.0100
0.0000
0.0100
0.0000
0.0000
0.0000
7.00
MQW-8/45 r
0.0000
0.0000
-0.0100
0.0000
0.0000
0.0000
7.00
Support No.
5
7
(Design load)
Designation
Forces[kN]
Moments[kNm]
MQP-21-72
0.1000
-0.0010
0.9140
0.0010
0.2000
0.0000
MQP-21-72
0.1000
-0.0010
0.9360
0.0010
0.2000
0.0000
MQP-45
0.0000
0.0010
0.0090
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0010
0.0090
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
437
Contact:
Page:
8 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Designation
Torsion
Stress
Torsion
[%]
[]
[%]
MQ-41 3m
33.55
0.0
0.00
MQ-41 3m
16.34
0.0
0.00
MQ-41 3m
32.14
0.0
0.00
MQ-21 6m
0.12
0.0
0.00
MQ-21 6m
0.12
0.0
0.00
(Design load)
Beam No.
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MQP-21-72
0.9140
0.0010
-0.1000
0.0000
0.2000
0.0010
42.00
MQW-4
-0.1000
0.0000
0.8700
0.0000
0.0000
0.0000
14.00
MQW-4
0.1000
0.0000
0.8900
0.0000
0.0000
0.0000
15.00
MQP-21-72
0.9370
-0.0010
0.1000
0.0000
-0.2000
-0.0010
41.00
MQP-45
0.0100
0.0000
0.0100
0.0000
0.0000
0.0000
7.00
MQW-8/45 r
0.0000
0.0000
-0.0100
0.0000
0.0000
0.0000
7.00
MQP-45
0.0100
0.0000
0.0100
0.0000
0.0000
0.0000
7.00
MQW-8/45 r
0.0000
0.0000
-0.0100
0.0000
0.0000
0.0000
7.00
(Design load)
Forces[kN]
Moments[kNm]
Node No.
Support No.
MQP-21-72
-0.1000
-0.0010
0.9140
0.0010
-0.2000
0.0000
MQP-21-72
-0.1000
-0.0010
0.9370
0.0010
-0.2000
0.0000
MQP-45
0.0000
0.0010
0.0090
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0010
0.0090
0.0000
0.0000
0.0000
Designation
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-41 3m
10.68
0.0
0.00
MQ-41 3m
16.22
0.0
0.00
MQ-41 3m
11.17
0.0
0.00
MQ-21 6m
0.12
0.0
0.00
MQ-21 6m
0.12
0.0
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
438
Contact:
Page:
9 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Beam No.
3
4
09-Mar-15
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MQP-21-72
0.9140
0.0010
0.0300
0.0000
-0.0600
0.0010
17.00
MQW-4
0.0300
0.0000
0.8700
0.0000
0.0000
0.0000
13.00
MQW-4
-0.0300
0.0000
0.8900
0.0000
0.0000
0.0000
13.00
MQP-21-72
0.9360
-0.0010
-0.0300
0.0000
0.0600
-0.0010
17.00
MQP-45
0.0100
0.0000
0.0100
0.0000
0.0000
0.0000
7.00
MQW-8/45 r
0.0000
0.0000
-0.0100
0.0000
0.0000
0.0000
7.00
MQP-45
0.0100
0.0000
0.0100
0.0000
0.0000
0.0000
7.00
MQW-8/45 r
0.0000
0.0000
-0.0100
0.0000
0.0000
0.0000
7.00
(Design load)
Support No.
4
5
7
Forces[kN]
Designation
Moments[kNm]
MQP-21-72
0.0300
-0.0010
0.9140
0.0010
0.0600
0.0000
MQP-21-72
0.0300
-0.0010
0.9360
0.0010
0.0600
0.0000
MQP-45
0.0000
0.0010
0.0090
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0010
0.0090
0.0000
0.0000
0.0000
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-41 3m
11.12
0.0
0.00
MQ-41 3m
16.22
0.0
0.00
MQ-41 3m
10.73
0.0
0.00
MQ-21 6m
0.12
0.0
0.00
MQ-21 6m
0.12
0.0
0.00
Beam No.
2
3
(Design load)
Designation
Forces[kN]
Moments[kNm]
Utilization[%]
MQP-21-72
0.9140
0.0010
-0.0300
0.0000
0.0600
0.0010
17.00
MQW-4
-0.0300
0.0000
0.8700
0.0000
0.0000
0.0000
13.00
MQW-4
0.0300
0.0000
0.8900
0.0000
0.0000
0.0000
13.00
MQP-21-72
0.9370
-0.0010
0.0300
0.0000
-0.0600
-0.0010
17.00
MQP-45
0.0100
0.0000
0.0100
0.0000
0.0000
0.0000
7.00
MQW-8/45 r
0.0000
0.0000
-0.0100
0.0000
0.0000
0.0000
7.00
MQP-45
0.0100
0.0000
0.0100
0.0000
0.0000
0.0000
7.00
MQW-8/45 r
0.0000
0.0000
-0.0100
0.0000
0.0000
0.0000
7.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
439
Contact:
Page:
10 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
Support No.
5
7
09-Mar-15
(Design load)
Designation
Forces[kN]
Moments[kNm]
MQP-21-72
-0.0300
-0.0010
0.9140
0.0010
-0.0600
0.0000
MQP-21-72
-0.0300
-0.0010
0.9370
0.0010
-0.0600
0.0000
MQP-45
0.0000
0.0010
0.0090
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0010
0.0090
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
440
Contact:
Page:
11 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Stress:
Beam No. 1: MQ-41 3m
Position
[m]
0.00
0.00
0.00
Actual
[kN/m]
82,360.000
850.000
82,360.000
Limit
[kN/m]
245,450.000
141,710.000
245,450.000
Utilization
[%]
33.55
0.60
33.55
[m]
0.12
0.46
0.12
Actual
[kN/m]
62,920.000
-11,400.000
63,420.000
Limit
[kN/m]
245,450.000
141,710.000
245,450.000
Utilization
[%]
25.63
8.04
25.84
[m]
0.00
0.00
0.00
Actual
[kN/m]
82,480.000
-850.000
82,480.000
Limit
[kN/m]
245,450.000
141,710.000
245,450.000
Utilization
[%]
33.60
0.60
33.60
[m]
0.00
0.00
0.00
Actual
[kN/m]
60.000
170.000
310.000
Limit
[kN/m]
263,640.000
152,210.000
263,640.000
Utilization
[%]
0.02
0.11
0.12
[m]
0.00
0.00
0.00
Actual
[kN/m]
60.000
170.000
310.000
Limit
[kN/m]
263,640.000
152,210.000
263,640.000
Utilization
[%]
0.02
0.11
0.12
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
441
Contact:
Page:
12 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Displacement SLS1:
Beam No.
Value
Position [m]
Max. Displacement
2.00
Displacement [mm]
Utilization
u-X
u-Y
u-Z
[%]
0.0
0.0
0.0
0.52
Max. Displacement
0.23
0.0
0.0
0.2
10.13
Max. Displacement
2.00
0.0
0.0
0.0
0.53
Max. Displacement
0.64
0.0
-0.1
0.1
1.94
Max. Displacement
0.64
0.0
-0.1
0.1
1.94
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
442
Contact:
Page:
13 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
(Design load)
Support load:
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
-0.0010
1.3630
0.0010
0.0000
0.0000
0.0000
-0.0020
1.3970
0.0010
0.0000
0.0000
0.0000
0.0010
0.0130
0.0000
0.0000
0.0000
0.0000
0.0020
0.0130
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.1000
-0.0010
0.9140
0.0010
0.2000
0.0000
0.1000
-0.0010
0.9360
0.0010
0.2000
0.0000
0.0000
0.0010
0.0090
0.0000
0.0000
0.0000
0.0000
0.0010
0.0090
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
-0.1000
-0.0010
0.9140
0.0010
-0.2000
0.0000
-0.1000
-0.0010
0.9370
0.0010
-0.2000
0.0000
0.0000
0.0010
0.0090
0.0000
0.0000
0.0000
0.0000
0.0010
0.0090
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
443
Contact:
Page:
14 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0300
-0.0010
0.9140
0.0010
0.0600
0.0000
0.0300
-0.0010
0.9360
0.0010
0.0600
0.0000
0.0000
0.0010
0.0090
0.0000
0.0000
0.0000
0.0000
0.0010
0.0090
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
-0.0300
-0.0010
0.9140
0.0010
-0.0600
0.0000
-0.0300
-0.0010
0.9370
0.0010
-0.0600
0.0000
0.0000
0.0010
0.0090
0.0000
0.0000
0.0000
0.0000
0.0010
0.0090
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
444
Contact:
Page:
15 of 15
Project:
Sec. Bldg
CHW 32 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
445
Contact:
Page:
1 of 18
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
446
Contact:
Page:
2 of 18
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Calculation factors:
Load type:
Seismic
LC1: g
LC2: q
LC3: Ex
Earthquake in X-direction
LC4: Ey
Earthquake in Y-direction
1.1
1.5
1.35
Load combinations:
ULS1 = 1.35*LC1+1.5*LC2
SLS1 = 1*LC1+1*LC2
ULS2 = 1*LC1+1*LC2+1*LC4
ULS3 = 1*LC1+1*LC2-1*LC4
ULS4 = 1*LC1+1*LC2+0.3*LC4
ULS5 = 1*LC1+1*LC2-0.3*LC4
Maximum beam allowable deflection:
200
150
1.5
Local
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
447
Contact:
Page:
3 of 18
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Parts List:
Channels
Description
Pos
Qty
Item
369585
Beam No.
0.8
0.28
6,7
369585
1.8
0.66
4,5
369605
29.4
2.08
1,3
369591
0.8
0.41
Item
Weight [kg]
Node No.
Connections
Description
Pos
Qty
369649
0.7
9,11
369660
1.6
6,8,...
369654
2.4
5,7
369653
5.6
1,4
369658
0.5
2,3
Fixations
Description
Item
Pos
Qty
10
36
369623
11
10
371587
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Fixation text
448
Contact:
Page:
4 of 18
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Accessories
Description
Item
Pos
Qty
12
370598
0.0
0.00
13
369686
0.0
0.00
14
369685
0.0
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
449
Contact:
Page:
5 of 18
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Static model:
Node
Hinged axis
Connection
No.
0.0000
0.0000
0.0000
0.0000
0.0000
2.0000
Y,Z
MQW-4
0.5300
0.0000
2.0000
Y,Z
MQW-4
0.5300
0.0000
0.0000
0.0000
-0.6000
0.0000
X,Y,Z
0.0000
0.0000
0.6000
X,Z
0.5300
-0.6000
0.0000
X,Y,Z
0.5300
0.0000
0.6000
X,Z
MQP-124
0.0000
-0.3000
0.0000
X,Y,Z
10
0.0000
0.0000
0.3000
X,Z
11
0.5300
-0.3000
0.0000
X,Y,Z
12
0.5300
0.0000
0.3000
X,Z
Building material
Concrete
MQP-124
Concrete
MQP-G
Concrete
MQW-8/45 r
MQP-G
Concrete
MQW-8/45 r
MQP-45
Concrete
MQW-8/45 r
MQP-45
Concrete
MQW-8/45 r
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
450
Contact:
Page:
6 of 18
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Beams
Beam
Channel
No.
MQ-52-72 D 6m
Length
Rotation
Iy
Iz
[m]
[]
[cm]
[cm]
[cm]
[kN/m]
2.00
180
8.449
115
26.1297
210,000,000.
MQ-41 3m
0.53
2.451
5.3744
7.3341
210,000,000.
MQ-52-72 D 6m
2.00
8.449
115
26.1297
210,000,000.
MQ-21 6m
0.85
1.653
0.9174
4.3914
210,000,000.
MQ-21 6m
0.85
1.653
0.9174
4.3914
210,000,000.
MQ-21 6m
0.42
1.653
0.9174
4.3914
210,000,000.
MQ-21 6m
0.42
1.653
0.9174
4.3914
210,000,000.
No.
1
2
Position
Forces [kN]
Moments [kNm]
Forces [kN]
[m]
Ex
Ey
0.15
0.0000
0.0000
2.2875
0.0000
0.0000
0.0000
0.0000
0.2635
0.38
0.0000
0.0000
2.2875
0.0000
0.0000
0.0000
0.0000
0.2635
Load description
No.
Type
Custom load
Custom load
Description
Size [mm]
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Span [m]
451
Contact:
Page:
7 of 18
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Calculation summary
1 Beams
(1) Connections
[1] Supports
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-52-72 D 6m
2.06
0.0
0.00
MQ-41 3m
83.74
0.0
0.00
MQ-52-72 D 6m
2.06
0.0
0.00
MQ-21 6m
0.12
0.0
0.00
MQ-21 6m
0.12
0.0
0.00
MQ-21 6m
0.09
0.0
0.00
MQ-21 6m
0.09
0.0
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
452
Contact:
Page:
8 of 18
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Beam No.
3
4
09-Mar-15
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MQP-124
3.6020
0.0270
0.0000
0.0000
0.0000
0.0080
24.00
MQW-4
0.0000
0.0000
3.4400
0.0000
0.0000
0.0000
49.00
MQW-4
0.0000
0.0000
3.4400
0.0000
0.0000
0.0000
49.00
MQP-124
3.6020
-0.0270
0.0000
0.0000
0.0000
-0.0080
24.00
MQP-G
0.0080
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
-0.0100
0.0000
-0.0100
0.0000
0.0000
0.0000
7.00
MQP-G
0.0080
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
-0.0100
0.0000
-0.0100
0.0000
0.0000
0.0000
7.00
MQP-45
0.0400
0.0000
0.0000
0.0000
0.0000
0.0000
1.00
10
MQW-8/45 r
0.0400
0.0000
0.0000
0.0000
0.0000
0.0000
1.00
11
MQP-45
0.0400
0.0000
0.0000
0.0000
0.0000
0.0000
1.00
12
MQW-8/45 r
0.0400
0.0000
0.0000
0.0000
0.0000
0.0000
1.00
(Design load)
Forces[kN]
Moments[kNm]
Node No.
Support No.
MQP-124
0.0000
-0.0270
3.6020
0.0080
0.0000
0.0000
MQP-124
0.0000
-0.0270
3.6020
0.0080
0.0000
0.0000
MQP-G
0.0000
0.0000
0.0080
0.0000
0.0000
0.0000
MQP-G
0.0000
0.0000
0.0080
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0270
0.0310
0.0000
0.0000
0.0000
11
MQP-45
0.0000
0.0270
0.0310
0.0000
0.0000
0.0000
Designation
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-52-72 D 6m
13.08
0.0
0.00
MQ-41 3m
58.70
0.0
0.00
MQ-52-72 D 6m
13.08
0.0
0.00
MQ-21 6m
4.41
0.0
0.00
MQ-21 6m
4.41
0.0
0.00
MQ-21 6m
2.59
0.0
0.00
MQ-21 6m
2.59
0.0
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
453
Contact:
Page:
9 of 18
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Beam No.
3
4
09-Mar-15
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MQP-124
1.8810
0.2890
0.0000
0.0000
0.0000
0.0440
41.00
MQW-4
0.0000
0.2600
2.2900
0.0000
0.0000
0.0000
74.00
MQW-4
0.0000
0.2600
2.2900
0.0000
0.0000
0.0000
74.00
MQP-124
1.8810
-0.2890
0.0000
0.0000
0.0000
-0.0440
41.00
MQP-G
1.9180
0.0000
0.0000
0.0000
0.0000
0.0000
15.00
MQW-8/45 r
1.9100
0.0000
0.0000
0.0000
0.0000
0.0000
45.00
MQP-G
1.9180
0.0000
0.0000
0.0000
0.0000
0.0000
15.00
MQW-8/45 r
1.9100
0.0000
0.0000
0.0000
0.0000
0.0000
45.00
MQP-45
-1.1300
0.0000
0.0000
0.0000
0.0000
0.0000
12.00
10
MQW-8/45 r
-1.1300
0.0000
0.0000
0.0000
0.0000
0.0000
27.00
11
MQP-45
-1.1300
0.0000
0.0000
0.0000
0.0000
0.0000
12.00
12
MQW-8/45 r
-1.1300
0.0000
0.0000
0.0000
0.0000
0.0000
27.00
(Design load)
Forces[kN]
Moments[kNm]
Node No.
Support No.
MQP-124
0.0000
-0.2890
1.8810
0.0440
0.0000
0.0000
MQP-124
0.0000
-0.2890
1.8810
0.0440
0.0000
0.0000
MQP-G
0.0000
1.3540
1.3590
0.0000
0.0000
0.0000
MQP-G
0.0000
1.3540
1.3590
0.0000
0.0000
0.0000
MQP-45
0.0000
-0.8010
-0.7980
0.0000
0.0000
0.0000
11
MQP-45
0.0000
-0.8010
-0.7980
0.0000
0.0000
0.0000
Designation
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-52-72 D 6m
14.28
0.0
0.00
MQ-41 3m
58.70
0.0
0.00
MQ-52-72 D 6m
14.28
0.0
0.00
MQ-21 6m
4.41
0.0
0.00
MQ-21 6m
4.41
0.0
0.00
MQ-21 6m
2.73
0.0
0.00
MQ-21 6m
2.73
0.0
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
454
Contact:
Page:
10 of 18
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Beam No.
3
4
09-Mar-15
Forces[kN]
Designation
Moments[kNm]
MQP-124
2.9510
-0.2530
0.0000
MQW-4
0.0000
-0.2600
2.2900
MQW-4
0.0000
-0.2600
2.2900
MQP-124
2.9510
0.2530
0.0000
MQP-G
-1.9110
0.0000
0.0000
MQW-8/45 r
-1.9200
0.0000
0.0000
MQP-G
-1.9110
0.0000
MQW-8/45 r
-1.9200
MQP-45
1.1900
10
MQW-8/45 r
11
MQP-45
12
MQW-8/45 r
Utilization[%]
0.0000
0.0000
-0.0330
31.00
0.0000
0.0000
0.0000
74.00
0.0000
0.0000
0.0000
74.00
0.0000
0.0000
0.0330
31.00
0.0000
0.0000
0.0000
15.00
0.0000
0.0000
0.0000
46.00
0.0000
0.0000
0.0000
0.0000
15.00
0.0000
0.0000
0.0000
0.0000
0.0000
46.00
0.0000
0.0000
0.0000
0.0000
0.0000
17.00
1.1800
0.0000
0.0000
0.0000
0.0000
0.0000
28.00
1.1900
0.0000
0.0000
0.0000
0.0000
0.0000
17.00
1.1800
0.0000
0.0000
0.0000
0.0000
0.0000
28.00
(Design load)
Forces[kN]
Moments[kNm]
Node No.
Support No.
MQP-124
0.0000
0.2530
2.9510
-0.0330
0.0000
0.0000
MQP-124
0.0000
0.2530
2.9510
-0.0330
0.0000
0.0000
MQP-G
0.0000
-1.3540
-1.3480
0.0000
0.0000
0.0000
MQP-G
0.0000
-1.3540
-1.3480
0.0000
0.0000
0.0000
MQP-45
0.0000
0.8370
0.8390
0.0000
0.0000
0.0000
11
MQP-45
0.0000
0.8370
0.8390
0.0000
0.0000
0.0000
Designation
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-52-72 D 6m
4.70
0.0
0.00
MQ-41 3m
55.75
0.0
0.00
MQ-52-72 D 6m
4.70
0.0
0.00
MQ-21 6m
1.33
0.0
0.00
MQ-21 6m
1.33
0.0
0.00
MQ-21 6m
0.73
0.0
0.00
MQ-21 6m
0.73
0.0
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
455
Contact:
Page:
11 of 18
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Beam No.
3
4
09-Mar-15
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MQP-124
2.2550
0.0990
0.0000
0.0000
0.0000
0.0170
17.00
MQW-4
0.0000
0.0800
2.2900
0.0000
0.0000
0.0000
45.00
MQW-4
0.0000
0.0800
2.2900
0.0000
0.0000
0.0000
45.00
MQP-124
2.2550
-0.0990
0.0000
0.0000
0.0000
-0.0170
17.00
MQP-G
0.5780
0.0000
0.0000
0.0000
0.0000
0.0000
5.00
MQW-8/45 r
0.5700
0.0000
0.0000
0.0000
0.0000
0.0000
14.00
MQP-G
0.5780
0.0000
0.0000
0.0000
0.0000
0.0000
5.00
MQW-8/45 r
0.5700
0.0000
0.0000
0.0000
0.0000
0.0000
14.00
MQP-45
-0.3200
0.0000
0.0000
0.0000
0.0000
0.0000
3.00
10
MQW-8/45 r
-0.3200
0.0000
0.0000
0.0000
0.0000
0.0000
8.00
11
MQP-45
-0.3200
0.0000
0.0000
0.0000
0.0000
0.0000
3.00
12
MQW-8/45 r
-0.3200
0.0000
0.0000
0.0000
0.0000
0.0000
8.00
(Design load)
Forces[kN]
Moments[kNm]
Node No.
Support No.
MQP-124
0.0000
-0.0990
2.2550
0.0170
0.0000
0.0000
MQP-124
0.0000
-0.0990
2.2550
0.0170
0.0000
0.0000
MQP-G
0.0000
0.4060
0.4120
0.0000
0.0000
0.0000
MQP-G
0.0000
0.4060
0.4120
0.0000
0.0000
0.0000
MQP-45
0.0000
-0.2280
-0.2250
0.0000
0.0000
0.0000
11
MQP-45
0.0000
-0.2280
-0.2250
0.0000
0.0000
0.0000
Designation
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-52-72 D 6m
5.03
0.0
0.00
MQ-41 3m
55.75
0.0
0.00
MQ-52-72 D 6m
5.03
0.0
0.00
MQ-21 6m
1.33
0.0
0.00
MQ-21 6m
1.33
0.0
0.00
MQ-21 6m
0.85
0.0
0.00
MQ-21 6m
0.85
0.0
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
456
Contact:
Page:
12 of 18
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Beam No.
3
4
Forces[kN]
Designation
Moments[kNm]
MQP-124
2.5760
-0.0630
0.0000
MQW-4
0.0000
-0.0800
2.2900
MQW-4
0.0000
-0.0800
2.2900
MQP-124
2.5760
0.0630
0.0000
MQP-G
-0.5710
0.0000
0.0000
MQW-8/45 r
-0.5800
0.0000
0.0000
MQP-G
-0.5710
0.0000
MQW-8/45 r
-0.5800
MQP-45
0.3700
10
MQW-8/45 r
11
MQP-45
12
MQW-8/45 r
09-Mar-15
Utilization[%]
0.0000
0.0000
-0.0060
17.00
0.0000
0.0000
0.0000
45.00
0.0000
0.0000
0.0000
45.00
0.0000
0.0000
0.0060
17.00
0.0000
0.0000
0.0000
5.00
0.0000
0.0000
0.0000
14.00
0.0000
0.0000
0.0000
0.0000
5.00
0.0000
0.0000
0.0000
0.0000
0.0000
14.00
0.0000
0.0000
0.0000
0.0000
0.0000
5.00
0.3700
0.0000
0.0000
0.0000
0.0000
0.0000
9.00
0.3700
0.0000
0.0000
0.0000
0.0000
0.0000
5.00
0.3700
0.0000
0.0000
0.0000
0.0000
0.0000
9.00
(Design load)
Forces[kN]
Moments[kNm]
Node No.
Support No.
MQP-124
0.0000
0.0630
2.5760
-0.0060
0.0000
0.0000
MQP-124
0.0000
0.0630
2.5760
-0.0060
0.0000
0.0000
MQP-G
0.0000
-0.4060
-0.4010
0.0000
0.0000
0.0000
MQP-G
0.0000
-0.4060
-0.4010
0.0000
0.0000
0.0000
MQP-45
0.0000
0.2640
0.2660
0.0000
0.0000
0.0000
11
MQP-45
0.0000
0.2640
0.2660
0.0000
0.0000
0.0000
Designation
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
457
Contact:
Page:
13 of 18
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Stress:
Beam No. 1: MQ-52-72 D 6m
Position
[m]
0.60
0.30
0.60
Actual
[kN/m]
33,620.000
-6,500.000
35,050.000
Limit
[kN/m]
245,450.000
141,710.000
245,450.000
Utilization
[%]
13.70
4.59
14.28
[m]
0.15
0.00
0.15
Actual
[kN/m]
204,480.000
29,260.000
205,550.000
Limit
[kN/m]
245,450.000
141,710.000
245,450.000
Utilization
[%]
83.31
20.65
83.74
[m]
0.60
0.30
0.60
Actual
[kN/m]
33,620.000
6,500.000
35,050.000
Limit
[kN/m]
245,450.000
141,710.000
245,450.000
Utilization
[%]
13.70
4.59
14.28
[m]
0.00
0.00
0.00
Actual
[kN/m]
11,610.000
170.000
11,610.000
Limit
[kN/m]
263,640.000
152,210.000
263,640.000
Utilization
[%]
4.41
0.11
4.41
[m]
0.00
0.00
0.00
Actual
[kN/m]
11,610.000
170.000
11,610.000
Limit
[kN/m]
263,640.000
152,210.000
263,640.000
Utilization
[%]
4.41
0.11
4.41
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
458
Contact:
Page:
14 of 18
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
[m]
0.00
0.00
0.00
Actual
[kN/m]
7,200.000
0.000
7,200.000
Limit
[kN/m]
263,640.000
0.000
263,640.000
Utilization
[%]
2.73
0.00
2.73
[m]
0.00
0.00
0.00
Actual
[kN/m]
7,200.000
0.000
7,200.000
Limit
[kN/m]
263,640.000
0.000
263,640.000
Utilization
[%]
2.73
0.00
2.73
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
459
Contact:
Page:
15 of 18
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Displacement SLS1:
Beam No.
Value
Position [m]
Max. Displacement
2.00
Displacement [mm]
Utilization
u-X
u-Y
u-Z
[%]
0.0
0.0
0.0
0.30
Max. Displacement
0.26
0.0
0.0
1.0
37.35
Max. Displacement
2.00
0.0
0.0
0.0
0.30
Max. Displacement
0.47
0.0
0.0
0.0
0.64
Max. Displacement
0.47
0.0
0.0
0.0
0.64
Max. Displacement
0.36
0.0
0.0
0.0
0.19
Max. Displacement
0.36
0.0
0.0
0.0
0.19
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
460
Contact:
Page:
16 of 18
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
(Design load)
Support load:
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
-0.0270
3.6020
0.0080
0.0000
0.0000
0.0000
-0.0270
3.6020
0.0080
0.0000
0.0000
0.0000
0.0000
0.0080
0.0000
0.0000
0.0000
0.0000
0.0000
0.0080
0.0000
0.0000
0.0000
0.0000
0.0270
0.0310
0.0000
0.0000
0.0000
0.0000
0.0270
0.0310
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
-0.2890
1.8810
0.0440
0.0000
0.0000
0.0000
-0.2890
1.8810
0.0440
0.0000
0.0000
0.0000
1.3540
1.3590
0.0000
0.0000
0.0000
0.0000
1.3540
1.3590
0.0000
0.0000
0.0000
0.0000
-0.8010
-0.7980
0.0000
0.0000
0.0000
0.0000
-0.8010
-0.7980
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
0.2530
2.9510
-0.0330
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
461
Contact:
Page:
17 of 18
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
Support
Forces [kN]
09-Mar-15
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
0.2530
2.9510
-0.0330
0.0000
0.0000
0.0000
-1.3540
-1.3480
0.0000
0.0000
0.0000
0.0000
-1.3540
-1.3480
0.0000
0.0000
0.0000
0.0000
0.8370
0.8390
0.0000
0.0000
0.0000
0.0000
0.8370
0.8390
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
-0.0990
2.2550
0.0170
0.0000
0.0000
0.0000
-0.0990
2.2550
0.0170
0.0000
0.0000
0.0000
0.4060
0.4120
0.0000
0.0000
0.0000
0.0000
0.4060
0.4120
0.0000
0.0000
0.0000
0.0000
-0.2280
-0.2250
0.0000
0.0000
0.0000
0.0000
-0.2280
-0.2250
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
0.0630
2.5760
-0.0060
0.0000
0.0000
0.0000
0.0630
2.5760
-0.0060
0.0000
0.0000
0.0000
-0.4060
-0.4010
0.0000
0.0000
0.0000
0.0000
-0.4060
-0.4010
0.0000
0.0000
0.0000
0.0000
0.2640
0.2660
0.0000
0.0000
0.0000
0.0000
0.2640
0.2660
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
462
Contact:
Page:
18 of 18
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
463
Contact:
Page:
1 of 18
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
464
Contact:
Page:
2 of 18
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Calculation factors:
Load type:
Seismic
LC1: g
LC2: q
LC3: Ex
Earthquake in X-direction
LC4: Ey
Earthquake in Y-direction
1.1
1.5
1.35
Load combinations:
ULS1 = 1.35*LC1+1.5*LC2
SLS1 = 1*LC1+1*LC2
ULS2 = 1*LC1+1*LC2+1*LC3
ULS3 = 1*LC1+1*LC2-1*LC3
ULS4 = 1*LC1+1*LC2+0.3*LC3
ULS5 = 1*LC1+1*LC2-0.3*LC3
Maximum beam allowable deflection:
200
150
1.5
Local
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
465
Contact:
Page:
3 of 18
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Parts List:
Channels
Description
Pos
Qty
Item
369585
Beam No.
0.8
0.28
6,7
369585
1.8
0.66
4,5
369605
29.4
2.08
1,3
369591
0.8
0.41
Item
Weight [kg]
Node No.
Connections
Description
Pos
Qty
369649
0.7
9,11
369660
1.6
6,8,...
369654
2.4
5,7
369658
0.5
2,3
369653
5.6
1,4
Fixations
Description
Item
Pos
Qty
10
36
369623
11
10
371587
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Fixation text
466
Contact:
Page:
4 of 18
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Accessories
Description
Item
Pos
Qty
12
370598
0.0
0.00
13
369686
0.0
0.00
14
369685
0.0
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
467
Contact:
Page:
5 of 18
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Static model:
Node
Hinged axis
Connection
No.
0.0000
0.0000
0.0000
0.0000
0.0000
2.0000
Y,Z
MQW-4
0.5300
0.0000
2.0000
Y,Z
MQW-4
0.5300
0.0000
0.0000
0.0000
-0.6000
0.0000
X,Y,Z
0.0000
0.0000
0.6000
X,Z
0.5300
-0.6000
0.0000
X,Y,Z
0.5300
0.0000
0.6000
X,Z
MQP-124
0.0000
-0.3000
0.0000
X,Y,Z
10
0.0000
0.0000
0.3000
X,Z
11
0.5300
-0.3000
0.0000
X,Y,Z
12
0.5300
0.0000
0.3000
X,Z
Building material
Concrete
MQP-124
Concrete
MQP-G
Concrete
MQW-8/45 r
MQP-G
Concrete
MQW-8/45 r
MQP-45
Concrete
MQW-8/45 r
MQP-45
Concrete
MQW-8/45 r
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
468
Contact:
Page:
6 of 18
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Beams
Beam
Channel
No.
MQ-52-72 D 6m
Length
Rotation
Iy
Iz
[m]
[]
[cm]
[cm]
[cm]
[kN/m]
2.00
180
8.449
115
26.1297
210,000,000.
MQ-41 3m
0.53
2.451
5.3744
7.3341
210,000,000.
MQ-52-72 D 6m
2.00
8.449
115
26.1297
210,000,000.
MQ-21 6m
0.85
1.653
0.9174
4.3914
210,000,000.
MQ-21 6m
0.85
1.653
0.9174
4.3914
210,000,000.
MQ-21 6m
0.42
1.653
0.9174
4.3914
210,000,000.
MQ-21 6m
0.42
1.653
0.9174
4.3914
210,000,000.
No.
1
2
Position
Forces [kN]
Moments [kNm]
Forces [kN]
[m]
Ex
Ey
0.15
0.0000
0.0000
2.2875
0.0000
0.0000
0.0000
0.2635
0.0000
0.38
0.0000
0.0000
2.2875
0.0000
0.0000
0.0000
0.2635
0.0000
Load description
No.
Type
Custom load
Custom load
Description
Size [mm]
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Span [m]
469
Contact:
Page:
7 of 18
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Calculation summary
1 Beams
(1) Connections
[1] Supports
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-52-72 D 6m
2.06
0.0
0.00
MQ-41 3m
83.74
0.0
0.00
MQ-52-72 D 6m
2.06
0.0
0.00
MQ-21 6m
0.12
0.0
0.00
MQ-21 6m
0.12
0.0
0.00
MQ-21 6m
0.09
0.0
0.00
MQ-21 6m
0.09
0.0
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
470
Contact:
Page:
8 of 18
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Beam No.
3
4
09-Mar-15
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MQP-124
3.6020
0.0270
0.0000
0.0000
0.0000
0.0080
24.00
MQW-4
0.0000
0.0000
3.4400
0.0000
0.0000
0.0000
49.00
MQW-4
0.0000
0.0000
3.4400
0.0000
0.0000
0.0000
49.00
MQP-124
3.6020
-0.0270
0.0000
0.0000
0.0000
-0.0080
24.00
MQP-G
0.0080
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
-0.0100
0.0000
-0.0100
0.0000
0.0000
0.0000
7.00
MQP-G
0.0080
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
-0.0100
0.0000
-0.0100
0.0000
0.0000
0.0000
7.00
MQP-45
0.0400
0.0000
0.0000
0.0000
0.0000
0.0000
1.00
10
MQW-8/45 r
0.0400
0.0000
0.0000
0.0000
0.0000
0.0000
1.00
11
MQP-45
0.0400
0.0000
0.0000
0.0000
0.0000
0.0000
1.00
12
MQW-8/45 r
0.0400
0.0000
0.0000
0.0000
0.0000
0.0000
1.00
(Design load)
Forces[kN]
Moments[kNm]
Node No.
Support No.
MQP-124
0.0000
-0.0270
3.6020
0.0080
0.0000
0.0000
MQP-124
0.0000
-0.0270
3.6020
0.0080
0.0000
0.0000
MQP-G
0.0000
0.0000
0.0080
0.0000
0.0000
0.0000
MQP-G
0.0000
0.0000
0.0080
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0270
0.0310
0.0000
0.0000
0.0000
11
MQP-45
0.0000
0.0270
0.0310
0.0000
0.0000
0.0000
Designation
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-52-72 D 6m
13.03
0.0
0.00
MQ-41 3m
55.20
0.0
0.00
MQ-52-72 D 6m
13.03
0.0
0.00
MQ-21 6m
0.00
0.0
0.00
MQ-21 6m
0.00
0.0
0.00
MQ-21 6m
0.07
0.0
0.00
MQ-21 6m
0.07
0.0
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
471
Contact:
Page:
9 of 18
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Beam No.
3
4
09-Mar-15
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MQP-124
2.4160
0.0180
0.2640
0.0000
-0.5280
0.0050
48.00
MQW-4
0.2600
0.0000
2.2900
0.0000
0.0000
0.0000
38.00
MQW-4
-0.2600
0.0000
2.2900
0.0000
0.0000
0.0000
36.00
MQP-124
2.4160
-0.0180
-0.2640
0.0000
0.5280
-0.0050
48.00
MQP-G
0.0060
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0000
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQP-G
0.0060
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0000
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQP-45
0.0300
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
10
MQW-8/45 r
0.0200
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
11
MQP-45
0.0300
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
12
MQW-8/45 r
0.0200
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
(Design load)
Forces[kN]
Moments[kNm]
Node No.
Support No.
MQP-124
0.2640
-0.0180
2.4160
0.0050
0.5280
0.0000
MQP-124
0.2640
-0.0180
2.4160
0.0050
0.5280
0.0000
MQP-G
0.0000
0.0000
0.0060
0.0000
0.0000
0.0000
MQP-G
0.0000
0.0000
0.0060
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0180
0.0210
0.0000
0.0000
0.0000
11
MQP-45
0.0000
0.0180
0.0210
0.0000
0.0000
0.0000
Designation
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-52-72 D 6m
13.03
0.0
0.00
MQ-41 3m
55.20
0.0
0.00
MQ-52-72 D 6m
13.03
0.0
0.00
MQ-21 6m
0.00
0.0
0.00
MQ-21 6m
0.00
0.0
0.00
MQ-21 6m
0.07
0.0
0.00
MQ-21 6m
0.07
0.0
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
472
Contact:
Page:
10 of 18
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Beam No.
09-Mar-15
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MQP-124
2.4160
0.0180
-0.2640
0.0000
0.5280
0.0050
48.00
MQW-4
-0.2600
0.0000
2.2900
0.0000
0.0000
0.0000
36.00
MQW-4
0.2600
0.0000
2.2900
0.0000
0.0000
0.0000
38.00
MQP-124
2.4160
-0.0180
0.2640
0.0000
-0.5280
-0.0050
48.00
MQP-G
0.0060
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0000
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQP-G
0.0060
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0000
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQP-45
0.0300
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
10
MQW-8/45 r
0.0200
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
11
MQP-45
0.0300
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
12
MQW-8/45 r
0.0200
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
(Design load)
Forces[kN]
Moments[kNm]
Node No.
Support No.
MQP-124
-0.2640
-0.0180
2.4160
0.0050
-0.5280
0.0000
MQP-124
-0.2640
-0.0180
2.4160
0.0050
-0.5280
0.0000
MQP-G
0.0000
0.0000
0.0060
0.0000
0.0000
0.0000
MQP-G
0.0000
0.0000
0.0060
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0180
0.0210
0.0000
0.0000
0.0000
11
MQP-45
0.0000
0.0180
0.0210
0.0000
0.0000
0.0000
Designation
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-52-72 D 6m
4.94
0.0
0.00
MQ-41 3m
54.90
0.0
0.00
MQ-52-72 D 6m
4.94
0.0
0.00
MQ-21 6m
0.00
0.0
0.00
MQ-21 6m
0.00
0.0
0.00
MQ-21 6m
0.07
0.0
0.00
MQ-21 6m
0.07
0.0
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
473
Contact:
Page:
11 of 18
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Beam No.
3
4
09-Mar-15
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MQP-124
2.4160
0.0180
0.0790
0.0000
-0.1580
0.0050
26.00
MQW-4
0.0800
0.0000
2.2900
0.0000
0.0000
0.0000
34.00
MQW-4
-0.0800
0.0000
2.2900
0.0000
0.0000
0.0000
34.00
MQP-124
2.4160
-0.0180
-0.0790
0.0000
0.1580
-0.0050
26.00
MQP-G
0.0060
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0000
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQP-G
0.0060
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0000
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQP-45
0.0300
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
10
MQW-8/45 r
0.0200
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
11
MQP-45
0.0300
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
12
MQW-8/45 r
0.0200
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
(Design load)
Forces[kN]
Moments[kNm]
Node No.
Support No.
MQP-124
0.0790
-0.0180
2.4160
0.0050
0.1580
0.0000
MQP-124
0.0790
-0.0180
2.4160
0.0050
0.1580
0.0000
MQP-G
0.0000
0.0000
0.0060
0.0000
0.0000
0.0000
MQP-G
0.0000
0.0000
0.0060
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0180
0.0210
0.0000
0.0000
0.0000
11
MQP-45
0.0000
0.0180
0.0210
0.0000
0.0000
0.0000
Designation
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-52-72 D 6m
4.94
0.0
0.00
MQ-41 3m
54.90
0.0
0.00
MQ-52-72 D 6m
4.94
0.0
0.00
MQ-21 6m
0.00
0.0
0.00
MQ-21 6m
0.00
0.0
0.00
MQ-21 6m
0.07
0.0
0.00
MQ-21 6m
0.07
0.0
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
474
Contact:
Page:
12 of 18
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Beam No.
09-Mar-15
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MQP-124
2.4160
0.0180
-0.0790
0.0000
0.1580
0.0050
26.00
MQW-4
-0.0800
0.0000
2.2900
0.0000
0.0000
0.0000
34.00
MQW-4
0.0800
0.0000
2.2900
0.0000
0.0000
0.0000
34.00
MQP-124
2.4160
-0.0180
0.0790
0.0000
-0.1580
-0.0050
26.00
MQP-G
0.0060
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0000
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQP-G
0.0060
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0000
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQP-45
0.0300
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
10
MQW-8/45 r
0.0200
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
11
MQP-45
0.0300
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
12
MQW-8/45 r
0.0200
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
(Design load)
Forces[kN]
Moments[kNm]
Node No.
Support No.
MQP-124
-0.0790
-0.0180
2.4160
0.0050
-0.1580
0.0000
MQP-124
-0.0790
-0.0180
2.4160
0.0050
-0.1580
0.0000
MQP-G
0.0000
0.0000
0.0060
0.0000
0.0000
0.0000
MQP-G
0.0000
0.0000
0.0060
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0180
0.0210
0.0000
0.0000
0.0000
11
MQP-45
0.0000
0.0180
0.0210
0.0000
0.0000
0.0000
Designation
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
475
Contact:
Page:
13 of 18
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Stress:
Beam No. 1: MQ-52-72 D 6m
Position
[m]
0.00
0.00
0.00
Actual
[kN/m]
31,980.000
650.000
31,980.000
Limit
[kN/m]
245,450.000
141,710.000
245,450.000
Utilization
[%]
13.03
0.46
13.03
[m]
0.15
0.00
0.15
Actual
[kN/m]
204,480.000
29,260.000
205,550.000
Limit
[kN/m]
245,450.000
141,710.000
245,450.000
Utilization
[%]
83.31
20.65
83.74
[m]
0.00
0.00
0.00
Actual
[kN/m]
31,990.000
-650.000
31,990.000
Limit
[kN/m]
245,450.000
141,710.000
245,450.000
Utilization
[%]
13.03
0.46
13.03
[m]
0.00
0.00
0.00
Actual
[kN/m]
60.000
170.000
310.000
Limit
[kN/m]
263,640.000
152,210.000
263,640.000
Utilization
[%]
0.02
0.11
0.12
[m]
0.00
0.00
0.00
Actual
[kN/m]
60.000
170.000
310.000
Limit
[kN/m]
263,640.000
152,210.000
263,640.000
Utilization
[%]
0.02
0.11
0.12
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
476
Contact:
Page:
14 of 18
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
[m]
0.00
0.00
0.00
Actual
[kN/m]
240.000
0.000
240.000
Limit
[kN/m]
263,640.000
0.000
263,640.000
Utilization
[%]
0.09
0.00
0.09
[m]
0.00
0.00
0.00
Actual
[kN/m]
240.000
0.000
240.000
Limit
[kN/m]
263,640.000
0.000
263,640.000
Utilization
[%]
0.09
0.00
0.09
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
477
Contact:
Page:
15 of 18
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Displacement SLS1:
Beam No.
Value
Position [m]
Max. Displacement
2.00
Displacement [mm]
Utilization
u-X
u-Y
u-Z
[%]
0.0
0.0
0.0
0.30
Max. Displacement
0.26
0.0
0.0
1.0
37.35
Max. Displacement
2.00
0.0
0.0
0.0
0.30
Max. Displacement
0.47
0.0
0.0
0.0
0.64
Max. Displacement
0.47
0.0
0.0
0.0
0.64
Max. Displacement
0.36
0.0
0.0
0.0
0.19
Max. Displacement
0.36
0.0
0.0
0.0
0.19
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
478
Contact:
Page:
16 of 18
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
(Design load)
Support load:
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
-0.0270
3.6020
0.0080
0.0000
0.0000
0.0000
-0.0270
3.6020
0.0080
0.0000
0.0000
0.0000
0.0000
0.0080
0.0000
0.0000
0.0000
0.0000
0.0000
0.0080
0.0000
0.0000
0.0000
0.0000
0.0270
0.0310
0.0000
0.0000
0.0000
0.0000
0.0270
0.0310
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.2640
-0.0180
2.4160
0.0050
0.5280
0.0000
0.2640
-0.0180
2.4160
0.0050
0.5280
0.0000
0.0000
0.0000
0.0060
0.0000
0.0000
0.0000
0.0000
0.0000
0.0060
0.0000
0.0000
0.0000
0.0000
0.0180
0.0210
0.0000
0.0000
0.0000
0.0000
0.0180
0.0210
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
-0.2640
-0.0180
2.4160
0.0050
-0.5280
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
479
Contact:
Page:
17 of 18
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
Support
Forces [kN]
09-Mar-15
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
-0.2640
-0.0180
2.4160
0.0050
-0.5280
0.0000
0.0000
0.0000
0.0060
0.0000
0.0000
0.0000
0.0000
0.0000
0.0060
0.0000
0.0000
0.0000
0.0000
0.0180
0.0210
0.0000
0.0000
0.0000
0.0000
0.0180
0.0210
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0790
-0.0180
2.4160
0.0050
0.1580
0.0000
0.0790
-0.0180
2.4160
0.0050
0.1580
0.0000
0.0000
0.0000
0.0060
0.0000
0.0000
0.0000
0.0000
0.0000
0.0060
0.0000
0.0000
0.0000
0.0000
0.0180
0.0210
0.0000
0.0000
0.0000
0.0000
0.0180
0.0210
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
-0.0790
-0.0180
2.4160
0.0050
-0.1580
0.0000
-0.0790
-0.0180
2.4160
0.0050
-0.1580
0.0000
0.0000
0.0000
0.0060
0.0000
0.0000
0.0000
0.0000
0.0000
0.0060
0.0000
0.0000
0.0000
0.0000
0.0180
0.0210
0.0000
0.0000
0.0000
0.0000
0.0180
0.0210
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
480
Contact:
Page:
18 of 18
Project:
Sec. Bldg
CHW 65 mm dia | Supply and
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
481
Contact:
Page:
1 of 18
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
482
Contact:
Page:
2 of 18
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Calculation factors:
Load type:
Seismic
LC1: g
LC2: q
LC3: Ex
Earthquake in X-direction
LC4: Ey
Earthquake in Y-direction
1.1
1.5
1.35
Load combinations:
ULS1 = 1.35*LC1+1.5*LC2
SLS1 = 1*LC1+1*LC2
ULS2 = 1*LC1+1*LC2+1*LC4
ULS3 = 1*LC1+1*LC2-1*LC4
ULS4 = 1*LC1+1*LC2+0.3*LC4
ULS5 = 1*LC1+1*LC2-0.3*LC4
Maximum beam allowable deflection:
200
150
1.5
Local
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
483
Contact:
Page:
3 of 18
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Parts List:
Channels
Description
Pos
Qty
Item
369585
Beam No.
0.8
0.28
6,7
369585
1.8
0.66
4,5
369605
27.3
1.93
1,3
369605
7.0
0.99
Item
Weight [kg]
Node No.
Connections
Description
Pos
Qty
369649
0.7
9,11
369660
1.6
6,8,...
369654
2.4
5,7
369658
1.0
2,3
369653
5.6
1,4
Fixations
Description
Item
Pos
Qty
10
40
369623
11
10
371587
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Fixation text
484
Contact:
Page:
4 of 18
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Accessories
Description
Item
Pos
Qty
12
370598
0.0
0.00
13
369686
0.0
0.00
14
369685
0.0
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
485
Contact:
Page:
5 of 18
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Static model:
Node
Hinged axis
Connection
No.
0.0000
0.0000
0.0000
0.0000
0.0000
2.0000
X,Y
MQW-4 double
0.7500
0.0000
2.0000
X,Y
MQW-4 double
0.7500
0.0000
0.0000
0.0000
-0.6000
0.0000
X,Y,Z
0.0000
0.0000
0.6000
X,Z
0.7500
-0.6000
0.0000
X,Y,Z
0.7500
0.0000
0.6000
X,Z
MQP-124
0.0000
-0.3000
0.0000
X,Y,Z
10
0.0000
0.0000
0.3000
X,Z
11
0.7500
-0.3000
0.0000
X,Y,Z
12
0.7500
0.0000
0.3000
X,Z
Building material
Concrete
MQP-124
Concrete
MQP-G
Concrete
MQW-8/45 r
MQP-G
Concrete
MQW-8/45 r
MQP-45
Concrete
MQW-8/45 r
MQP-45
Concrete
MQW-8/45 r
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
486
Contact:
Page:
6 of 18
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Beams
Beam
Channel
No.
Length
Rotation
Iy
Iz
[m]
[]
[cm]
[cm]
[cm]
[kN/m]
8.449
115
26.1297
210,000,000.
MQ-52-72 D 6m
2.00
MQ-52-72 D 6m
0.75
8.449
115
26.1297
210,000,000.
MQ-52-72 D 6m
2.00
180
8.449
115
26.1297
210,000,000.
MQ-21 6m
0.85
1.653
0.9174
4.3914
210,000,000.
MQ-21 6m
0.85
1.653
0.9174
4.3914
210,000,000.
MQ-21 6m
0.42
1.653
0.9174
4.3914
210,000,000.
MQ-21 6m
0.42
1.653
0.9174
4.3914
210,000,000.
No.
1
2
Position
Forces [kN]
Moments [kNm]
Forces [kN]
[m]
Ex
Ey
0.22
0.0000
0.0000
4.9000
0.0000
0.0000
0.0000
0.0000
0.5600
0.53
0.0000
0.0000
4.9000
0.0000
0.0000
0.0000
0.0000
0.5600
Load description
No.
Type
Custom load
Custom load
Description
Size [mm]
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Span [m]
487
Contact:
Page:
7 of 18
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Calculation summary
1 Beams
(1) Connections
[1] Supports
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-52-72 D 6m
4.27
0.0
0.00
MQ-52-72 D 6m
35.54
0.0
0.00
MQ-52-72 D 6m
4.27
0.0
0.00
MQ-21 6m
0.12
0.0
0.00
MQ-21 6m
0.12
0.0
0.00
MQ-21 6m
0.18
0.0
0.00
MQ-21 6m
0.18
0.0
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
488
Contact:
Page:
8 of 18
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Beam No.
3
4
09-Mar-15
Forces[kN]
Designation
Moments[kNm]
MQP-124
7.5170
-0.0560
0.0000
MQW-4 double
7.3800
0.0000
0.0000
MQW-4 double
7.3800
0.0000
MQP-124
7.5170
0.0560
Utilization[%]
0.0000
0.0000
-0.0170
51.00
0.0000
0.0000
0.0000
98.00
0.0000
0.0000
0.0000
0.0000
98.00
0.0000
0.0000
0.0000
0.0170
51.00
MQP-G
0.0080
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0000
0.0000
-0.0100
0.0000
0.0000
0.0000
7.00
MQP-G
0.0080
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0000
0.0000
-0.0100
0.0000
0.0000
0.0000
7.00
MQP-45
0.0800
0.0000
0.0000
0.0000
0.0000
0.0000
1.00
10
MQW-8/45 r
0.0800
0.0000
0.0000
0.0000
0.0000
0.0000
2.00
11
MQP-45
0.0800
0.0000
0.0000
0.0000
0.0000
0.0000
1.00
12
MQW-8/45 r
0.0800
0.0000
0.0000
0.0000
0.0000
0.0000
2.00
(Design load)
Forces[kN]
Moments[kNm]
Node No.
Support No.
MQP-124
0.0000
-0.0560
7.5170
0.0170
0.0000
0.0000
MQP-124
0.0000
-0.0560
7.5170
0.0170
0.0000
0.0000
MQP-G
0.0000
0.0000
0.0080
0.0000
0.0000
0.0000
MQP-G
0.0000
0.0000
0.0080
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0560
0.0600
0.0000
0.0000
0.0000
11
MQP-45
0.0000
0.0560
0.0600
0.0000
0.0000
0.0000
Designation
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-52-72 D 6m
27.56
0.0
0.00
MQ-52-72 D 6m
27.05
0.0
0.00
MQ-52-72 D 6m
27.56
0.0
0.00
MQ-21 6m
9.34
0.0
0.00
MQ-21 6m
9.34
0.0
0.00
MQ-21 6m
5.51
0.0
0.00
MQ-21 6m
5.51
0.0
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
489
Contact:
Page:
9 of 18
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Beam No.
3
4
09-Mar-15
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MQP-124
3.8930
-0.6130
0.0000
MQW-4 double
4.9200
-0.5600
0.0000
0.0000
0.0000
-0.0930
87.00
0.0000
0.0000
0.0000
92.00
MQW-4 double
4.9200
-0.5600
0.0000
MQP-124
3.8930
0.6130
0.0000
0.0000
0.0000
0.0000
92.00
0.0000
0.0000
0.0930
87.00
MQP-G
4.0650
0.0000
0.0000
0.0000
0.0000
0.0000
32.00
MQW-8/45 r
4.0600
0.0000
0.0000
0.0000
0.0000
0.0000
97.00
MQP-G
4.0650
0.0000
0.0000
0.0000
0.0000
0.0000
32.00
MQW-8/45 r
4.0600
0.0000
0.0000
0.0000
0.0000
0.0000
97.00
MQP-45
-2.4000
0.0000
0.0000
0.0000
0.0000
0.0000
24.00
10
MQW-8/45 r
-2.4000
0.0000
0.0000
0.0000
0.0000
0.0000
57.00
11
MQP-45
-2.4000
0.0000
0.0000
0.0000
0.0000
0.0000
24.00
12
MQW-8/45 r
-2.4000
0.0000
0.0000
0.0000
0.0000
0.0000
57.00
(Design load)
Forces[kN]
Moments[kNm]
Node No.
Support No.
MQP-124
0.0000
-0.6130
3.8930
0.0930
0.0000
0.0000
MQP-124
0.0000
-0.6130
3.8930
0.0930
0.0000
0.0000
MQP-G
0.0000
2.8720
2.8770
0.0000
0.0000
0.0000
MQP-G
0.0000
2.8720
2.8770
0.0000
0.0000
0.0000
MQP-45
0.0000
-1.6990
-1.6960
0.0000
0.0000
0.0000
11
MQP-45
0.0000
-1.6990
-1.6960
0.0000
0.0000
0.0000
Designation
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-52-72 D 6m
30.10
0.0
0.00
MQ-52-72 D 6m
27.05
0.0
0.00
MQ-52-72 D 6m
30.10
0.0
0.00
MQ-21 6m
9.32
0.0
0.00
MQ-21 6m
9.32
0.0
0.00
MQ-21 6m
5.76
0.0
0.00
MQ-21 6m
5.76
0.0
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
490
Contact:
Page:
10 of 18
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Beam No.
3
4
09-Mar-15
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MQP-124
6.1630
0.5370
0.0000
0.0000
0.0000
0.0710
68.00
MQW-4 double
4.9200
0.5600
0.0000
0.0000
0.0000
0.0000
92.00
MQW-4 double
4.9200
0.5600
0.0000
0.0000
0.0000
0.0000
92.00
MQP-124
6.1630
-0.5370
0.0000
0.0000
0.0000
-0.0710
68.00
MQP-G
-4.0570
0.0000
0.0000
0.0000
0.0000
0.0000
32.00
MQW-8/45 r
-4.0600
0.0000
0.0000
0.0000
0.0000
0.0000
97.00
MQP-G
-4.0570
0.0000
0.0000
0.0000
0.0000
0.0000
32.00
MQW-8/45 r
-4.0600
0.0000
0.0000
0.0000
0.0000
0.0000
97.00
MQP-45
2.5100
0.0000
0.0000
0.0000
0.0000
0.0000
36.00
10
MQW-8/45 r
2.5100
0.0000
0.0000
0.0000
0.0000
0.0000
60.00
11
MQP-45
2.5100
0.0000
0.0000
0.0000
0.0000
0.0000
36.00
12
MQW-8/45 r
2.5100
0.0000
0.0000
0.0000
0.0000
0.0000
60.00
(Design load)
Forces[kN]
Moments[kNm]
Node No.
Support No.
MQP-124
0.0000
0.5370
6.1630
-0.0710
0.0000
0.0000
MQP-124
0.0000
0.5370
6.1630
-0.0710
0.0000
0.0000
MQP-G
0.0000
-2.8710
-2.8660
0.0000
0.0000
0.0000
MQP-G
0.0000
-2.8710
-2.8660
0.0000
0.0000
0.0000
MQP-45
0.0000
1.7740
1.7770
0.0000
0.0000
0.0000
11
MQP-45
0.0000
1.7740
1.7770
0.0000
0.0000
0.0000
Designation
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-52-72 D 6m
10.15
0.0
0.00
MQ-52-72 D 6m
24.76
0.0
0.00
MQ-52-72 D 6m
10.15
0.0
0.00
MQ-21 6m
2.80
0.0
0.00
MQ-21 6m
2.80
0.0
0.00
MQ-21 6m
1.58
0.0
0.00
MQ-21 6m
1.58
0.0
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
491
Contact:
Page:
11 of 18
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Beam No.
3
4
09-Mar-15
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MQP-124
4.6880
-0.2100
0.0000
MQW-4 double
4.9200
-0.1700
0.0000
0.0000
0.0000
-0.0360
35.00
0.0000
0.0000
0.0000
65.00
MQW-4 double
4.9200
-0.1700
0.0000
MQP-124
4.6880
0.2100
0.0000
0.0000
0.0000
0.0000
65.00
0.0000
0.0000
0.0360
35.00
MQP-G
1.2230
0.0000
0.0000
0.0000
0.0000
0.0000
10.00
MQW-8/45 r
1.2100
0.0000
0.0000
0.0000
0.0000
0.0000
29.00
MQP-G
1.2230
0.0000
0.0000
0.0000
0.0000
0.0000
10.00
MQW-8/45 r
1.2100
0.0000
0.0000
0.0000
0.0000
0.0000
29.00
MQP-45
-0.6800
0.0000
0.0000
0.0000
0.0000
0.0000
7.00
10
MQW-8/45 r
-0.6900
0.0000
0.0000
0.0000
0.0000
0.0000
16.00
11
MQP-45
-0.6800
0.0000
0.0000
0.0000
0.0000
0.0000
7.00
12
MQW-8/45 r
-0.6900
0.0000
0.0000
0.0000
0.0000
0.0000
16.00
(Design load)
Forces[kN]
Moments[kNm]
Node No.
Support No.
MQP-124
0.0000
-0.2100
4.6880
0.0360
0.0000
0.0000
MQP-124
0.0000
-0.2100
4.6880
0.0360
0.0000
0.0000
MQP-G
0.0000
0.8620
0.8670
0.0000
0.0000
0.0000
MQP-G
0.0000
0.8620
0.8670
0.0000
0.0000
0.0000
MQP-45
0.0000
-0.4840
-0.4810
0.0000
0.0000
0.0000
11
MQP-45
0.0000
-0.4840
-0.4810
0.0000
0.0000
0.0000
Designation
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-52-72 D 6m
10.85
0.0
0.00
MQ-52-72 D 6m
24.76
0.0
0.00
MQ-52-72 D 6m
10.85
0.0
0.00
MQ-21 6m
2.80
0.0
0.00
MQ-21 6m
2.80
0.0
0.00
MQ-21 6m
1.81
0.0
0.00
MQ-21 6m
1.81
0.0
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
492
Contact:
Page:
12 of 18
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Beam No.
3
4
09-Mar-15
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MQP-124
5.3690
0.1350
0.0000
0.0000
0.0000
0.0130
36.00
MQW-4 double
4.9200
0.1700
0.0000
0.0000
0.0000
0.0000
65.00
MQW-4 double
4.9200
0.1700
0.0000
0.0000
0.0000
0.0000
65.00
MQP-124
5.3690
-0.1350
0.0000
0.0000
0.0000
-0.0130
36.00
MQP-G
-1.2140
0.0000
0.0000
0.0000
0.0000
0.0000
10.00
MQW-8/45 r
-1.2200
0.0000
0.0000
0.0000
0.0000
0.0000
29.00
MQP-G
-1.2140
0.0000
0.0000
0.0000
0.0000
0.0000
10.00
MQW-8/45 r
-1.2200
0.0000
0.0000
0.0000
0.0000
0.0000
29.00
MQP-45
0.7900
0.0000
0.0000
0.0000
0.0000
0.0000
11.00
10
MQW-8/45 r
0.7900
0.0000
0.0000
0.0000
0.0000
0.0000
19.00
11
MQP-45
0.7900
0.0000
0.0000
0.0000
0.0000
0.0000
11.00
12
MQW-8/45 r
0.7900
0.0000
0.0000
0.0000
0.0000
0.0000
19.00
(Design load)
Forces[kN]
Moments[kNm]
Node No.
Support No.
MQP-124
0.0000
0.1350
5.3690
-0.0130
0.0000
0.0000
MQP-124
0.0000
0.1350
5.3690
-0.0130
0.0000
0.0000
MQP-G
0.0000
-0.8610
-0.8560
0.0000
0.0000
0.0000
MQP-G
0.0000
-0.8610
-0.8560
0.0000
0.0000
0.0000
MQP-45
0.0000
0.5580
0.5610
0.0000
0.0000
0.0000
11
MQP-45
0.0000
0.5580
0.5610
0.0000
0.0000
0.0000
Designation
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
493
Contact:
Page:
13 of 18
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Stress:
Beam No. 1: MQ-52-72 D 6m
Position
[m]
0.60
0.30
0.60
Actual
[kN/m]
70,850.000
13,780.000
73,890.000
Limit
[kN/m]
245,450.000
141,710.000
245,450.000
Utilization
[%]
28.86
9.72
30.10
[m]
0.22
0.00
0.22
Actual
[kN/m]
87,050.000
15,900.000
87,230.000
Limit
[kN/m]
245,450.000
141,710.000
245,450.000
Utilization
[%]
35.47
11.22
35.54
[m]
0.60
0.30
0.60
Actual
[kN/m]
70,850.000
-13,780.000
73,890.000
Limit
[kN/m]
245,450.000
141,710.000
245,450.000
Utilization
[%]
28.86
9.72
30.10
[m]
0.00
0.00
0.00
Actual
[kN/m]
24,620.000
170.000
24,620.000
Limit
[kN/m]
263,640.000
152,210.000
263,640.000
Utilization
[%]
9.34
0.11
9.34
[m]
0.00
0.00
0.00
Actual
[kN/m]
24,620.000
170.000
24,620.000
Limit
[kN/m]
263,640.000
152,210.000
263,640.000
Utilization
[%]
9.34
0.11
9.34
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
494
Contact:
Page:
14 of 18
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
[m]
0.00
0.00
0.00
Actual
[kN/m]
15,180.000
0.000
15,180.000
Limit
[kN/m]
263,640.000
0.000
263,640.000
Utilization
[%]
5.76
0.00
5.76
[m]
0.00
0.00
0.00
Actual
[kN/m]
15,180.000
0.000
15,180.000
Limit
[kN/m]
263,640.000
0.000
263,640.000
Utilization
[%]
5.76
0.00
5.76
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
495
Contact:
Page:
15 of 18
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Displacement SLS1:
Beam No.
Value
Position [m]
u-X
u-Y
u-Z
[%]
Max. Displacement
2.00
0.0
0.0
0.0
0.63
Max. Displacement
0.38
0.0
0.0
0.3
8.26
Max. Displacement
2.00
0.0
0.0
0.0
0.63
Max. Displacement
0.51
0.0
0.0
0.0
0.75
Max. Displacement
0.51
0.0
0.0
0.0
0.75
Max. Displacement
0.42
0.0
0.0
0.0
0.40
Max. Displacement
0.42
0.0
0.0
0.0
0.40
Displacement [mm]
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Utilization
496
Contact:
Page:
16 of 18
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
(Design load)
Support load:
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
-0.0560
7.5170
0.0170
0.0000
0.0000
0.0000
-0.0560
7.5170
0.0170
0.0000
0.0000
0.0000
0.0000
0.0080
0.0000
0.0000
0.0000
0.0000
0.0000
0.0080
0.0000
0.0000
0.0000
0.0000
0.0560
0.0600
0.0000
0.0000
0.0000
0.0000
0.0560
0.0600
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
-0.6130
3.8930
0.0930
0.0000
0.0000
0.0000
-0.6130
3.8930
0.0930
0.0000
0.0000
0.0000
2.8720
2.8770
0.0000
0.0000
0.0000
0.0000
2.8720
2.8770
0.0000
0.0000
0.0000
0.0000
-1.6990
-1.6960
0.0000
0.0000
0.0000
0.0000
-1.6990
-1.6960
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
0.5370
6.1630
-0.0710
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
497
Contact:
Page:
17 of 18
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
Support
Forces [kN]
09-Mar-15
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
0.5370
6.1630
-0.0710
0.0000
0.0000
0.0000
-2.8710
-2.8660
0.0000
0.0000
0.0000
0.0000
-2.8710
-2.8660
0.0000
0.0000
0.0000
0.0000
1.7740
1.7770
0.0000
0.0000
0.0000
0.0000
1.7740
1.7770
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
-0.2100
4.6880
0.0360
0.0000
0.0000
0.0000
-0.2100
4.6880
0.0360
0.0000
0.0000
0.0000
0.8620
0.8670
0.0000
0.0000
0.0000
0.0000
0.8620
0.8670
0.0000
0.0000
0.0000
0.0000
-0.4840
-0.4810
0.0000
0.0000
0.0000
0.0000
-0.4840
-0.4810
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
0.1350
5.3690
-0.0130
0.0000
0.0000
0.0000
0.1350
5.3690
-0.0130
0.0000
0.0000
0.0000
-0.8610
-0.8560
0.0000
0.0000
0.0000
0.0000
-0.8610
-0.8560
0.0000
0.0000
0.0000
0.0000
0.5580
0.5610
0.0000
0.0000
0.0000
0.0000
0.5580
0.5610
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
498
Contact:
Page:
18 of 18
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
499
Contact:
Page:
1 of 18
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
500
Contact:
Page:
2 of 18
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Calculation factors:
Load type:
Seismic
LC1: g
LC2: q
LC3: Ex
Earthquake in X-direction
LC4: Ey
Earthquake in Y-direction
1.1
1.5
1.35
Load combinations:
ULS1 = 1.35*LC1+1.5*LC2
SLS1 = 1*LC1+1*LC2
ULS2 = 1*LC1+1*LC2+1*LC3
ULS3 = 1*LC1+1*LC2-1*LC3
ULS4 = 1*LC1+1*LC2+0.3*LC3
ULS5 = 1*LC1+1*LC2-0.3*LC3
Maximum beam allowable deflection:
200
150
1.5
Local
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
501
Contact:
Page:
3 of 18
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Parts List:
Channels
Description
Pos
Qty
Item
369585
Beam No.
0.8
0.28
6,7
369585
1.8
0.66
4,5
369605
27.3
1.93
1,3
369605
7.0
0.99
Item
Weight [kg]
Node No.
369649
0.7
9,11
Connections
Description
Pos
Qty
369658
1.0
2,3
369660
1.6
6,8,...
369654
2.4
5,7
369653
5.6
1,4
Fixations
Description
Item
Pos
Qty
10
40
369623
11
10
371587
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Fixation text
502
Contact:
Page:
4 of 18
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Accessories
Description
Item
Pos
Qty
12
370598
0.0
0.00
13
369686
0.0
0.00
14
369685
0.0
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
503
Contact:
Page:
5 of 18
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Static model:
Node
Hinged axis
Connection
No.
0.0000
0.0000
0.0000
0.0000
0.0000
2.0000
X,Y
MQW-4 double
0.7500
0.0000
2.0000
X,Y
MQW-4 double
0.7500
0.0000
0.0000
0.0000
-0.6000
0.0000
X,Y,Z
0.0000
0.0000
0.6000
X,Z
0.7500
-0.6000
0.0000
X,Y,Z
0.7500
0.0000
0.6000
X,Z
MQP-124
0.0000
-0.3000
0.0000
X,Y,Z
10
0.0000
0.0000
0.3000
X,Z
11
0.7500
-0.3000
0.0000
X,Y,Z
12
0.7500
0.0000
0.3000
X,Z
Building material
Concrete
MQP-124
Concrete
MQP-G
Concrete
MQW-8/45 r
MQP-G
Concrete
MQW-8/45 r
MQP-45
Concrete
MQW-8/45 r
MQP-45
Concrete
MQW-8/45 r
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
504
Contact:
Page:
6 of 18
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Beams
Beam
Channel
No.
Length
Rotation
Iy
Iz
[m]
[]
[cm]
[cm]
[cm]
[kN/m]
8.449
115
26.1297
210,000,000.
MQ-52-72 D 6m
2.00
MQ-52-72 D 6m
0.75
8.449
115
26.1297
210,000,000.
MQ-52-72 D 6m
2.00
180
8.449
115
26.1297
210,000,000.
MQ-21 6m
0.85
1.653
0.9174
4.3914
210,000,000.
MQ-21 6m
0.85
1.653
0.9174
4.3914
210,000,000.
MQ-21 6m
0.42
1.653
0.9174
4.3914
210,000,000.
MQ-21 6m
0.42
1.653
0.9174
4.3914
210,000,000.
No.
1
2
Position
Forces [kN]
Moments [kNm]
Forces [kN]
[m]
Ex
Ey
0.22
0.0000
0.0000
4.9000
0.0000
0.0000
0.0000
0.5600
0.0000
0.53
0.0000
0.0000
4.9000
0.0000
0.0000
0.0000
0.5600
0.0000
Load description
No.
Type
Custom load
Custom load
Description
Size [mm]
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Span [m]
505
Contact:
Page:
7 of 18
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Calculation summary
1 Beams
(1) Connections
[1] Supports
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-52-72 D 6m
4.27
0.0
0.00
MQ-52-72 D 6m
35.54
0.0
0.00
MQ-52-72 D 6m
4.27
0.0
0.00
MQ-21 6m
0.12
0.0
0.00
MQ-21 6m
0.12
0.0
0.00
MQ-21 6m
0.18
0.0
0.00
MQ-21 6m
0.18
0.0
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
506
Contact:
Page:
8 of 18
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Beam No.
3
4
09-Mar-15
Forces[kN]
Designation
Moments[kNm]
MQP-124
7.5170
-0.0560
0.0000
MQW-4 double
7.3800
0.0000
0.0000
MQW-4 double
7.3800
0.0000
MQP-124
7.5170
0.0560
Utilization[%]
0.0000
0.0000
-0.0170
51.00
0.0000
0.0000
0.0000
98.00
0.0000
0.0000
0.0000
0.0000
98.00
0.0000
0.0000
0.0000
0.0170
51.00
MQP-G
0.0080
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0000
0.0000
-0.0100
0.0000
0.0000
0.0000
7.00
MQP-G
0.0080
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0000
0.0000
-0.0100
0.0000
0.0000
0.0000
7.00
MQP-45
0.0800
0.0000
0.0000
0.0000
0.0000
0.0000
1.00
10
MQW-8/45 r
0.0800
0.0000
0.0000
0.0000
0.0000
0.0000
2.00
11
MQP-45
0.0800
0.0000
0.0000
0.0000
0.0000
0.0000
1.00
12
MQW-8/45 r
0.0800
0.0000
0.0000
0.0000
0.0000
0.0000
2.00
(Design load)
Forces[kN]
Moments[kNm]
Node No.
Support No.
MQP-124
0.0000
-0.0560
7.5170
0.0170
0.0000
0.0000
MQP-124
0.0000
-0.0560
7.5170
0.0170
0.0000
0.0000
MQP-G
0.0000
0.0000
0.0080
0.0000
0.0000
0.0000
MQP-G
0.0000
0.0000
0.0080
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0560
0.0600
0.0000
0.0000
0.0000
11
MQP-45
0.0000
0.0560
0.0600
0.0000
0.0000
0.0000
Designation
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-52-72 D 6m
27.21
0.0
0.00
MQ-52-72 D 6m
23.96
0.0
0.00
MQ-52-72 D 6m
27.20
0.0
0.00
MQ-21 6m
0.00
0.0
0.00
MQ-21 6m
0.00
0.0
0.00
MQ-21 6m
0.11
0.0
0.00
MQ-21 6m
0.11
0.0
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
507
Contact:
Page:
9 of 18
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Beam No.
09-Mar-15
Forces[kN]
Designation
Moments[kNm]
Z
Utilization[%]
MQP-124
5.0280
-0.0380
-0.5600
0.0000
1.1200
-0.0110
100.00
MQW-4 double
4.9200
0.0000
-0.5600
0.0000
0.0000
0.0000
65.00
MQW-4 double
4.9200
0.0000
-0.5600
0.0000
0.0000
0.0000
65.00
MQP-124
5.0280
0.0380
0.5600
0.0000
-1.1200
0.0110
100.00
MQP-G
0.0060
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0000
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQP-G
0.0060
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0000
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQP-45
0.0500
0.0000
0.0000
0.0000
0.0000
0.0000
1.00
10
MQW-8/45 r
0.0500
0.0000
0.0000
0.0000
0.0000
0.0000
1.00
11
MQP-45
0.0500
0.0000
0.0000
0.0000
0.0000
0.0000
1.00
12
MQW-8/45 r
0.0500
0.0000
0.0000
0.0000
0.0000
0.0000
1.00
(Design load)
Forces[kN]
Moments[kNm]
Node No.
Support No.
MQP-124
0.5600
-0.0380
5.0280
0.0110
1.1200
0.0000
MQP-124
0.5600
-0.0380
5.0280
0.0110
1.1200
0.0000
MQP-G
0.0000
0.0000
0.0060
0.0000
0.0000
0.0000
MQP-G
0.0000
0.0000
0.0060
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0370
0.0400
0.0000
0.0000
0.0000
11
MQP-45
0.0000
0.0370
0.0400
0.0000
0.0000
0.0000
Designation
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-52-72 D 6m
27.20
0.0
0.00
MQ-52-72 D 6m
23.96
0.0
0.00
MQ-52-72 D 6m
27.21
0.0
0.00
MQ-21 6m
0.00
0.0
0.00
MQ-21 6m
0.00
0.0
0.00
MQ-21 6m
0.11
0.0
0.00
MQ-21 6m
0.11
0.0
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
508
Contact:
Page:
10 of 18
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Beam No.
09-Mar-15
Forces[kN]
Designation
Moments[kNm]
Z
Utilization[%]
MQP-124
5.0280
-0.0380
0.5600
0.0000
-1.1200
-0.0110
100.00
MQW-4 double
4.9200
0.0000
0.5600
0.0000
0.0000
0.0000
65.00
MQW-4 double
4.9200
0.0000
0.5600
0.0000
0.0000
0.0000
65.00
MQP-124
5.0280
0.0380
-0.5600
0.0000
1.1200
0.0110
100.00
MQP-G
0.0060
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0000
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQP-G
0.0060
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0000
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQP-45
0.0500
0.0000
0.0000
0.0000
0.0000
0.0000
1.00
10
MQW-8/45 r
0.0500
0.0000
0.0000
0.0000
0.0000
0.0000
1.00
11
MQP-45
0.0500
0.0000
0.0000
0.0000
0.0000
0.0000
1.00
12
MQW-8/45 r
0.0500
0.0000
0.0000
0.0000
0.0000
0.0000
1.00
(Design load)
Forces[kN]
Moments[kNm]
Node No.
Support No.
MQP-124
-0.5600
-0.0380
5.0280
0.0110
-1.1200
0.0000
MQP-124
-0.5600
-0.0380
5.0280
0.0110
-1.1200
0.0000
MQP-G
0.0000
0.0000
0.0060
0.0000
0.0000
0.0000
MQP-G
0.0000
0.0000
0.0060
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0370
0.0400
0.0000
0.0000
0.0000
11
MQP-45
0.0000
0.0370
0.0400
0.0000
0.0000
0.0000
Designation
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-52-72 D 6m
10.13
0.0
0.00
MQ-52-72 D 6m
23.77
0.0
0.00
MQ-52-72 D 6m
10.13
0.0
0.00
MQ-21 6m
0.00
0.0
0.00
MQ-21 6m
0.00
0.0
0.00
MQ-21 6m
0.11
0.0
0.00
MQ-21 6m
0.11
0.0
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
509
Contact:
Page:
11 of 18
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Beam No.
3
4
09-Mar-15
Forces[kN]
Designation
Moments[kNm]
X
Utilization[%]
MQP-124
5.0280
-0.0380
-0.1680
MQW-4 double
4.9200
0.0000
-0.1700
0.0000
0.3360
-0.0110
54.00
0.0000
0.0000
0.0000
65.00
MQW-4 double
4.9200
0.0000
-0.1700
MQP-124
5.0280
0.0380
0.1680
0.0000
0.0000
0.0000
65.00
0.0000
-0.3360
0.0110
54.00
MQP-G
0.0060
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0000
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQP-G
0.0060
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0000
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQP-45
0.0500
0.0000
0.0000
0.0000
0.0000
0.0000
1.00
10
MQW-8/45 r
0.0500
0.0000
0.0000
0.0000
0.0000
0.0000
1.00
11
MQP-45
0.0500
0.0000
0.0000
0.0000
0.0000
0.0000
1.00
12
MQW-8/45 r
0.0500
0.0000
0.0000
0.0000
0.0000
0.0000
1.00
(Design load)
Forces[kN]
Moments[kNm]
Node No.
Support No.
MQP-124
0.1680
-0.0380
5.0280
0.0110
0.3360
0.0000
MQP-124
0.1680
-0.0380
5.0280
0.0110
0.3360
0.0000
MQP-G
0.0000
0.0000
0.0060
0.0000
0.0000
0.0000
MQP-G
0.0000
0.0000
0.0060
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0370
0.0400
0.0000
0.0000
0.0000
11
MQP-45
0.0000
0.0370
0.0400
0.0000
0.0000
0.0000
Designation
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MQ-52-72 D 6m
10.13
0.0
0.00
MQ-52-72 D 6m
23.77
0.0
0.00
MQ-52-72 D 6m
10.13
0.0
0.00
MQ-21 6m
0.00
0.0
0.00
MQ-21 6m
0.00
0.0
0.00
MQ-21 6m
0.11
0.0
0.00
MQ-21 6m
0.11
0.0
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
510
Contact:
Page:
12 of 18
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Beam No.
09-Mar-15
Designation
Forces[kN]
Moments[kNm]
Utilization[%]
MQP-124
5.0280
-0.0380
0.1680
0.0000
-0.3360
-0.0110
54.00
MQW-4 double
4.9200
0.0000
0.1700
0.0000
0.0000
0.0000
65.00
MQW-4 double
4.9200
0.0000
0.1700
0.0000
0.0000
0.0000
65.00
MQP-124
5.0280
0.0380
-0.1680
0.0000
0.3360
0.0110
54.00
MQP-G
0.0060
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0000
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQP-G
0.0060
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQW-8/45 r
0.0000
0.0000
0.0000
0.0000
0.0000
0.0000
0.00
MQP-45
0.0500
0.0000
0.0000
0.0000
0.0000
0.0000
1.00
10
MQW-8/45 r
0.0500
0.0000
0.0000
0.0000
0.0000
0.0000
1.00
11
MQP-45
0.0500
0.0000
0.0000
0.0000
0.0000
0.0000
1.00
12
MQW-8/45 r
0.0500
0.0000
0.0000
0.0000
0.0000
0.0000
1.00
(Design load)
Forces[kN]
Moments[kNm]
Node No.
Support No.
MQP-124
-0.1680
-0.0380
5.0280
0.0110
-0.3360
0.0000
MQP-124
-0.1680
-0.0380
5.0280
0.0110
-0.3360
0.0000
MQP-G
0.0000
0.0000
0.0060
0.0000
0.0000
0.0000
MQP-G
0.0000
0.0000
0.0060
0.0000
0.0000
0.0000
MQP-45
0.0000
0.0370
0.0400
0.0000
0.0000
0.0000
11
MQP-45
0.0000
0.0370
0.0400
0.0000
0.0000
0.0000
Designation
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
511
Contact:
Page:
13 of 18
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Stress:
Beam No. 1: MQ-52-72 D 6m
Position
[m]
0.00
0.00
0.00
Actual
[kN/m]
66,780.000
-1,390.000
66,790.000
Limit
[kN/m]
245,450.000
141,710.000
245,450.000
Utilization
[%]
27.21
0.98
27.21
[m]
0.22
0.00
0.22
Actual
[kN/m]
87,050.000
15,900.000
87,230.000
Limit
[kN/m]
245,450.000
141,710.000
245,450.000
Utilization
[%]
35.47
11.22
35.54
[m]
0.00
0.00
0.00
Actual
[kN/m]
66,780.000
1,390.000
66,790.000
Limit
[kN/m]
245,450.000
141,710.000
245,450.000
Utilization
[%]
27.21
0.98
27.21
[m]
0.00
0.00
0.00
Actual
[kN/m]
60.000
170.000
310.000
Limit
[kN/m]
263,640.000
152,210.000
263,640.000
Utilization
[%]
0.02
0.11
0.12
[m]
0.00
0.00
0.00
Actual
[kN/m]
60.000
170.000
310.000
Limit
[kN/m]
263,640.000
152,210.000
263,640.000
Utilization
[%]
0.02
0.11
0.12
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
512
Contact:
Page:
14 of 18
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
[m]
0.00
0.00
0.00
Actual
[kN/m]
480.000
0.000
480.000
Limit
[kN/m]
263,640.000
0.000
263,640.000
Utilization
[%]
0.18
0.00
0.18
[m]
0.00
0.00
0.00
Actual
[kN/m]
480.000
0.000
480.000
Limit
[kN/m]
263,640.000
0.000
263,640.000
Utilization
[%]
0.18
0.00
0.18
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
513
Contact:
Page:
15 of 18
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Displacement SLS1:
Beam No.
Value
Position [m]
u-X
u-Y
u-Z
[%]
Max. Displacement
2.00
0.0
0.0
0.0
0.63
Max. Displacement
0.38
0.0
0.0
0.3
8.26
Max. Displacement
2.00
0.0
0.0
0.0
0.63
Max. Displacement
0.51
0.0
0.0
0.0
0.75
Max. Displacement
0.51
0.0
0.0
0.0
0.75
Max. Displacement
0.42
0.0
0.0
0.0
0.40
Max. Displacement
0.42
0.0
0.0
0.0
0.40
Displacement [mm]
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Utilization
514
Contact:
Page:
16 of 18
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
(Design load)
Support load:
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
-0.0560
7.5170
0.0170
0.0000
0.0000
0.0000
-0.0560
7.5170
0.0170
0.0000
0.0000
0.0000
0.0000
0.0080
0.0000
0.0000
0.0000
0.0000
0.0000
0.0080
0.0000
0.0000
0.0000
0.0000
0.0560
0.0600
0.0000
0.0000
0.0000
0.0000
0.0560
0.0600
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.5600
-0.0380
5.0280
0.0110
1.1200
0.0000
0.5600
-0.0380
5.0280
0.0110
1.1200
0.0000
0.0000
0.0000
0.0060
0.0000
0.0000
0.0000
0.0000
0.0000
0.0060
0.0000
0.0000
0.0000
0.0000
0.0370
0.0400
0.0000
0.0000
0.0000
0.0000
0.0370
0.0400
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
-0.5600
-0.0380
5.0280
0.0110
-1.1200
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
515
Contact:
Page:
17 of 18
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
Support
Forces [kN]
09-Mar-15
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
-0.5600
-0.0380
5.0280
0.0110
-1.1200
0.0000
0.0000
0.0000
0.0060
0.0000
0.0000
0.0000
0.0000
0.0000
0.0060
0.0000
0.0000
0.0000
0.0000
0.0370
0.0400
0.0000
0.0000
0.0000
0.0000
0.0370
0.0400
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.1680
-0.0380
5.0280
0.0110
0.3360
0.0000
0.1680
-0.0380
5.0280
0.0110
0.3360
0.0000
0.0000
0.0000
0.0060
0.0000
0.0000
0.0000
0.0000
0.0000
0.0060
0.0000
0.0000
0.0000
0.0000
0.0370
0.0400
0.0000
0.0000
0.0000
0.0000
0.0370
0.0400
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
-0.1680
-0.0380
5.0280
0.0110
-0.3360
0.0000
-0.1680
-0.0380
5.0280
0.0110
-0.3360
0.0000
0.0000
0.0000
0.0060
0.0000
0.0000
0.0000
0.0000
0.0000
0.0060
0.0000
0.0000
0.0000
0.0000
0.0370
0.0400
0.0000
0.0000
0.0000
0.0000
0.0370
0.0400
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
516
Contact:
Page:
18 of 18
Project:
Sec. Bldg
CHW 100 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
517
Contact:
Page:
1 of 14
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
518
Contact:
Page:
2 of 14
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Calculation factors:
Load type:
Seismic
LC1: g
LC2: q
LC3: Ex
Earthquake in X-direction
LC4: Ey
Earthquake in Y-direction
1.1
1.5
1.35
Load combinations:
ULS1 = 1.35*LC1+1.5*LC2
SLS1 = 1*LC1+1*LC2
ULS2 = 1*LC1+1*LC2+1*LC4
ULS3 = 1*LC1+1*LC2-1*LC4
ULS4 = 1*LC1+1*LC2+0.3*LC4
ULS5 = 1*LC1+1*LC2-0.3*LC4
Maximum beam allowable deflection:
200
150
1.5
Local
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
519
Contact:
Page:
3 of 14
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Parts List:
Channels
Description
Item
Pos
Qty
Girder MI-90 3m
304798
38.4
2.04
1,3
Girder MI-90 3m
304798
5.9
0.62
Item
Weight [kg]
Node No.
304827
15.7
1,4
Item
Weight [kg]
Node No.
304803
5.0
2,3
Beam No.
Structure connections
Pos
Qty
Description
Connector MIC-C90-D concrete
Connections
Pos
Qty
Description
Connector MIC-90-U
Fixations
Pos
Qty
Description
Safety stud anchor HST M16X140/25
Item
Fixation text
371593
Accessories
Pos
Qty
Description
Girder end cap MIA-EC90
Item
432077
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
0.0
0.00
520
Contact:
Page:
4 of 14
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Static model:
Node
Hinged axis
Connection
No.
0.0000
0.0000
0.0000
0.0000
0.0000
2.0000
Y,Z
MIC-90-U
0.7500
0.0000
2.0000
Y,Z
MIC-90-U
0.7500
0.0000
0.0000
Building material
MIC-C90-D
Concrete
MIC-C90-D
Concrete
Beams
Beam
Channel
No.
Length
Rotation
Iy
Iz
[m]
[]
[cm]
[cm]
[cm]
[kN/m]
MI-90 3m
2.00
1,003
115
115
210,000,000.
MI-90 3m
0.75
1,003
115
115
210,000,000.
MI-90 3m
2.00
180
1,003
115
115
210,000,000.
Forces [kN]
Moments [kNm]
Forces [kN]
No.
No.
[m]
Ex
Ey
0.22
0.0000
0.0000
5.7750
0.0000
0.0000
0.0000
0.0000
0.4900
0.53
0.0000
0.0000
5.7750
0.0000
0.0000
0.0000
0.0000
0.4900
Load description
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
521
Contact:
Page:
5 of 14
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
No.
Date:
Type
Custom load
Custom load
Description
Size [mm]
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Span [m]
09-Mar-15
522
Contact:
Page:
6 of 14
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Calculation summary
1 Beams
(1) Connections
[1] Supports
Designation
Torsion
Stress
Torsion
[%]
[]
[%]
MI-90 3m
4.16
0.0
0.00
MI-90 3m
35.65
0.0
0.00
MI-90 3m
4.16
0.0
0.00
(Design load)
Beam No.
Designation
Forces[kN]
Moments[kNm]
Utilization[%]
MIC-C90-D
8.9150
0.0000
0.0000
0.0000
0.0000
0.0000
20.00
MIC-90-U
0.0000
0.0000
8.7000
0.0000
0.0000
0.0000
48.00
MIC-90-U
0.0000
0.0000
-8.7000
0.0000
0.0000
0.0000
48.00
MIC-C90-D
8.9150
0.0000
0.0000
0.0000
0.0000
0.0000
20.00
Support No.
(Design load)
Designation
Forces[kN]
Moments[kNm]
MIC-C90-D
0.0000
0.0000
8.9150
0.0000
0.0000
0.0000
MIC-C90-D
0.0000
0.0000
8.9150
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
523
Contact:
Page:
7 of 14
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Designation
Torsion
Stress
Torsion
[%]
[]
[%]
MI-90 3m
20.68
0.0
0.00
MI-90 3m
25.31
0.0
0.00
MI-90 3m
20.68
0.0
0.00
(Design load)
Beam No.
MIC-C90-D
MIC-90-U
MIC-90-U
MIC-C90-D
Forces[kN]
Designation
Support No.
Utilization[%]
5.9620
0.4900
0.0000
0.0000
0.0000
0.9800
99.00
0.0000
-0.4900
5.8000
0.0000
0.0000
0.0000
32.00
0.0000
0.4900
-5.8000
0.0000
0.0000
0.0000
32.00
5.9620
0.4900
0.0000
0.0000
0.0000
0.9800
99.00
(Design load)
Moments[kNm]
Forces[kN]
Designation
Moments[kNm]
MIC-C90-D
0.0000
0.4900
5.9620
-0.9800
0.0000
0.0000
MIC-C90-D
0.0000
0.4900
5.9620
-0.9800
0.0000
0.0000
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MI-90 3m
20.68
0.0
0.00
MI-90 3m
25.29
0.0
0.00
MI-90 3m
20.68
0.0
0.00
Beam No.
3
4
(Design load)
Designation
Forces[kN]
Moments[kNm]
Utilization[%]
MIC-C90-D
5.9620
-0.4900
0.0000
0.0000
0.0000
-0.9800
99.00
MIC-90-U
0.0000
0.4900
5.8000
0.0000
0.0000
0.0000
32.00
MIC-90-U
0.0000
-0.4900
-5.8000
0.0000
0.0000
0.0000
32.00
MIC-C90-D
5.9620
-0.4900
0.0000
0.0000
0.0000
-0.9800
99.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
524
Contact:
Page:
8 of 14
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Support No.
09-Mar-15
Forces[kN]
Designation
Moments[kNm]
MIC-C90-D
0.0000
-0.4900
5.9620
0.9800
0.0000
0.0000
MIC-C90-D
0.0000
-0.4900
5.9620
0.9800
0.0000
0.0000
Designation
Torsion
Stress
Torsion
[%]
[]
[%]
MI-90 3m
8.08
0.0
0.00
MI-90 3m
24.27
0.0
0.00
MI-90 3m
8.08
0.0
0.00
(Design load)
Beam No.
Forces[kN]
Designation
MIC-C90-D
Moments[kNm]
Utilization[%]
5.9620
0.1470
0.0000
0.0000
0.0000
0.2940
36.00
MIC-90-U
0.0000
-0.1500
5.8000
0.0000
0.0000
0.0000
32.00
MIC-90-U
0.0000
0.1500
-5.8000
0.0000
0.0000
0.0000
32.00
MIC-C90-D
5.9620
0.1470
0.0000
0.0000
0.0000
0.2940
36.00
(Design load)
Support No.
Forces[kN]
Designation
Moments[kNm]
MIC-C90-D
0.0000
0.1470
5.9620
-0.2940
0.0000
0.0000
MIC-C90-D
0.0000
0.1470
5.9620
-0.2940
0.0000
0.0000
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MI-90 3m
8.08
0.0
0.00
MI-90 3m
24.25
0.0
0.00
MI-90 3m
8.08
0.0
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
525
Contact:
Page:
9 of 14
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Beam No.
3
4
09-Mar-15
Designation
Forces[kN]
Moments[kNm]
Utilization[%]
MIC-C90-D
5.9620
-0.1470
0.0000
0.0000
0.0000
-0.2940
36.00
MIC-90-U
0.0000
0.1500
5.8000
0.0000
0.0000
0.0000
32.00
MIC-90-U
0.0000
-0.1500
-5.8000
0.0000
0.0000
0.0000
32.00
MIC-C90-D
5.9620
-0.1470
0.0000
0.0000
0.0000
-0.2940
36.00
Support No.
(Design load)
Designation
Forces[kN]
Moments[kNm]
MIC-C90-D
0.0000
-0.1470
5.9620
0.2940
0.0000
0.0000
MIC-C90-D
0.0000
-0.1470
5.9620
0.2940
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
526
Contact:
Page:
10 of 14
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Stress:
Beam No. 1: MI-90 3m
Position
[m]
0.00
0.00
0.00
Actual
[kN/m]
44,180.000
1,130.000
44,180.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
20.68
0.92
20.68
[m]
0.22
0.00
0.22
Actual
[kN/m]
-74,520.000
-20,090.000
76,160.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
34.88
16.29
35.65
[m]
0.00
0.00
0.00
Actual
[kN/m]
44,180.000
-1,130.000
44,180.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
20.68
0.92
20.68
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
527
Contact:
Page:
11 of 14
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Displacement SLS1:
Beam No.
Value
Position [m]
u-X
u-Y
u-Z
[%]
Max. Displacement
2.00
0.0
0.0
0.1
0.56
Max. Displacement
0.38
0.0
0.0
0.4
9.72
Max. Displacement
2.00
0.0
0.0
0.1
0.56
Displacement [mm]
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Utilization
528
Contact:
Page:
12 of 14
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
(Design load)
Support load:
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
0.0000
8.9150
0.0000
0.0000
0.0000
0.0000
0.0000
8.9150
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
0.4900
5.9620
-0.9800
0.0000
0.0000
0.0000
0.4900
5.9620
-0.9800
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
-0.4900
5.9620
0.9800
0.0000
0.0000
0.0000
-0.4900
5.9620
0.9800
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
0.1470
5.9620
-0.2940
0.0000
0.0000
0.0000
0.1470
5.9620
-0.2940
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
529
Contact:
Page:
13 of 14
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
-0.1470
5.9620
0.2940
0.0000
0.0000
0.0000
-0.1470
5.9620
0.2940
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
530
Contact:
Page:
14 of 14
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
531
Contact:
Page:
1 of 14
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
532
Contact:
Page:
2 of 14
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Calculation factors:
Load type:
Seismic
LC1: g
LC2: q
LC3: Ex
Earthquake in X-direction
LC4: Ey
Earthquake in Y-direction
1.1
1.5
1.35
Load combinations:
ULS1 = 1.35*LC1+1.5*LC2
SLS1 = 1*LC1+1*LC2
ULS2 = 1*LC1+1*LC2+1*LC3
ULS3 = 1*LC1+1*LC2-1*LC3
ULS4 = 1*LC1+1*LC2+0.3*LC3
ULS5 = 1*LC1+1*LC2-0.3*LC3
Maximum beam allowable deflection:
200
150
1.5
Local
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
533
Contact:
Page:
3 of 14
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Parts List:
Channels
Description
Item
Pos
Qty
Girder MI-90 3m
304798
38.4
2.04
1,3
Girder MI-90 3m
304798
5.9
0.62
Item
Weight [kg]
Node No.
304827
15.7
1,4
Item
Weight [kg]
Node No.
304803
5.0
2,3
Beam No.
Structure connections
Pos
Qty
Description
Connector MIC-C90-D concrete
Connections
Pos
Qty
Description
Connector MIC-90-U
Fixations
Pos
Qty
Description
Safety stud anchor HST M16X140/25
Item
Fixation text
371593
Accessories
Pos
Qty
Description
Girder end cap MIA-EC90
Item
432077
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
0.0
0.00
534
Contact:
Page:
4 of 14
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Static model:
Node
Hinged axis
Connection
No.
0.0000
0.0000
0.0000
0.0000
0.0000
2.0000
Y,Z
MIC-90-U
0.7500
0.0000
2.0000
Y,Z
MIC-90-U
0.7500
0.0000
0.0000
Building material
MIC-C90-D
Concrete
MIC-C90-D
Concrete
Beams
Beam
Channel
No.
Length
Rotation
Iy
Iz
[m]
[]
[cm]
[cm]
[cm]
[kN/m]
MI-90 3m
2.00
1,003
115
115
210,000,000.
MI-90 3m
0.75
1,003
115
115
210,000,000.
MI-90 3m
2.00
180
1,003
115
115
210,000,000.
Forces [kN]
Moments [kNm]
Forces [kN]
No.
No.
[m]
Ex
Ey
0.22
0.0000
0.0000
5.7750
0.0000
0.0000
0.0000
0.4900
0.0000
0.53
0.0000
0.0000
5.7750
0.0000
0.0000
0.0000
0.4900
0.0000
Load description
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
535
Contact:
Page:
5 of 14
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
No.
Date:
Type
Custom load
Custom load
Description
Size [mm]
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Span [m]
09-Mar-15
536
Contact:
Page:
6 of 14
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Calculation summary
1 Beams
(1) Connections
[1] Supports
Designation
Torsion
Stress
Torsion
[%]
[]
[%]
MI-90 3m
4.16
0.0
0.00
MI-90 3m
35.65
0.0
0.00
MI-90 3m
4.16
0.0
0.00
(Design load)
Beam No.
Designation
Forces[kN]
Moments[kNm]
Utilization[%]
MIC-C90-D
8.9150
0.0000
0.0000
0.0000
0.0000
0.0000
20.00
MIC-90-U
0.0000
0.0000
8.7000
0.0000
0.0000
0.0000
48.00
MIC-90-U
0.0000
0.0000
-8.7000
0.0000
0.0000
0.0000
48.00
MIC-C90-D
8.9150
0.0000
0.0000
0.0000
0.0000
0.0000
20.00
Support No.
(Design load)
Designation
Forces[kN]
Moments[kNm]
MIC-C90-D
0.0000
0.0000
8.9150
0.0000
0.0000
0.0000
MIC-C90-D
0.0000
0.0000
8.9150
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
537
Contact:
Page:
7 of 14
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Designation
Torsion
Stress
Torsion
[%]
[]
[%]
MI-90 3m
20.68
0.0
0.00
MI-90 3m
24.11
0.0
0.00
MI-90 3m
20.68
0.0
0.00
(Design load)
Beam No.
3
4
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MIC-C90-D
5.9620
0.0000
-0.4900
0.0000
0.9800
0.0000
99.00
MIC-90-U
0.4900
0.0000
5.8000
0.0000
0.0000
0.0000
47.00
MIC-90-U
-0.4900
0.0000
-5.8000
0.0000
0.0000
0.0000
32.00
MIC-C90-D
5.9620
0.0000
-0.4900
0.0000
0.9800
0.0000
99.00
(Design load)
Support No.
Forces[kN]
Designation
Moments[kNm]
MIC-C90-D
0.4900
0.0000
5.9620
0.0000
0.9800
0.0000
MIC-C90-D
0.4900
0.0000
5.9620
0.0000
0.9800
0.0000
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MI-90 3m
20.68
0.0
0.00
MI-90 3m
24.11
0.0
0.00
MI-90 3m
20.68
0.0
0.00
Beam No.
(Design load)
Designation
Forces[kN]
Moments[kNm]
Utilization[%]
MIC-C90-D
5.9620
0.0000
0.4900
0.0000
-0.9800
0.0000
99.00
MIC-90-U
-0.4900
0.0000
5.8000
0.0000
0.0000
0.0000
32.00
MIC-90-U
0.4900
0.0000
-5.8000
0.0000
0.0000
0.0000
47.00
MIC-C90-D
5.9620
0.0000
0.4900
0.0000
-0.9800
0.0000
99.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
538
Contact:
Page:
8 of 14
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Support No.
09-Mar-15
Forces[kN]
Designation
Moments[kNm]
MIC-C90-D
-0.4900
0.0000
5.9620
0.0000
-0.9800
0.0000
MIC-C90-D
-0.4900
0.0000
5.9620
0.0000
-0.9800
0.0000
Designation
Torsion
Stress
Torsion
[%]
[]
[%]
MI-90 3m
8.08
0.0
0.00
MI-90 3m
23.96
0.0
0.00
MI-90 3m
8.08
0.0
0.00
(Design load)
Beam No.
Forces[kN]
Designation
MIC-C90-D
Moments[kNm]
Utilization[%]
5.9620
0.0000
-0.1470
0.0000
0.2940
0.0000
36.00
MIC-90-U
0.1500
0.0000
5.8000
0.0000
0.0000
0.0000
34.00
MIC-90-U
-0.1500
0.0000
-5.8000
0.0000
0.0000
0.0000
32.00
MIC-C90-D
5.9620
0.0000
-0.1470
0.0000
0.2940
0.0000
36.00
(Design load)
Support No.
Forces[kN]
Designation
Moments[kNm]
MIC-C90-D
0.1470
0.0000
5.9620
0.0000
0.2940
0.0000
MIC-C90-D
0.1470
0.0000
5.9620
0.0000
0.2940
0.0000
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MI-90 3m
8.08
0.0
0.00
MI-90 3m
23.96
0.0
0.00
MI-90 3m
8.08
0.0
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
539
Contact:
Page:
9 of 14
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Beam No.
09-Mar-15
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MIC-C90-D
5.9620
0.0000
0.1470
0.0000
-0.2940
0.0000
36.00
MIC-90-U
-0.1500
0.0000
5.8000
0.0000
0.0000
0.0000
32.00
MIC-90-U
0.1500
0.0000
-5.8000
0.0000
0.0000
0.0000
34.00
MIC-C90-D
5.9620
0.0000
0.1470
0.0000
-0.2940
0.0000
36.00
Support No.
(Design load)
Designation
Forces[kN]
Moments[kNm]
MIC-C90-D
-0.1470
0.0000
5.9620
0.0000
-0.2940
0.0000
MIC-C90-D
-0.1470
0.0000
5.9620
0.0000
-0.2940
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
540
Contact:
Page:
10 of 14
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Stress:
Beam No. 1: MI-90 3m
Position
[m]
0.00
0.00
0.00
Actual
[kN/m]
44,180.000
1,130.000
44,180.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
20.68
0.92
20.68
[m]
0.22
0.00
0.22
Actual
[kN/m]
-74,520.000
-20,090.000
76,160.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
34.88
16.29
35.65
[m]
0.00
0.00
0.00
Actual
[kN/m]
44,180.000
-1,130.000
44,180.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
20.68
0.92
20.68
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
541
Contact:
Page:
11 of 14
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Displacement SLS1:
Beam No.
Value
Position [m]
u-X
u-Y
u-Z
[%]
Max. Displacement
2.00
0.0
0.0
0.1
0.56
Max. Displacement
0.38
0.0
0.0
0.4
9.72
Max. Displacement
2.00
0.0
0.0
0.1
0.56
Displacement [mm]
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Utilization
542
Contact:
Page:
12 of 14
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
(Design load)
Support load:
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
0.0000
8.9150
0.0000
0.0000
0.0000
0.0000
0.0000
8.9150
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.4900
0.0000
5.9620
0.0000
0.9800
0.0000
0.4900
0.0000
5.9620
0.0000
0.9800
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
-0.4900
0.0000
5.9620
0.0000
-0.9800
0.0000
-0.4900
0.0000
5.9620
0.0000
-0.9800
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.1470
0.0000
5.9620
0.0000
0.2940
0.0000
0.1470
0.0000
5.9620
0.0000
0.2940
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
543
Contact:
Page:
13 of 14
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
-0.1470
0.0000
5.9620
0.0000
-0.2940
0.0000
-0.1470
0.0000
5.9620
0.0000
-0.2940
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
544
Contact:
Page:
14 of 14
Project:
Sec. Bldg
CHW 150 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
545
Contact:
Page:
1 of 14
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
546
Contact:
Page:
2 of 14
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Calculation factors:
Load type:
Seismic
LC1: g
LC2: q
LC3: Ex
Earthquake in X-direction
LC4: Ey
Earthquake in Y-direction
1.1
1.5
1.35
Load combinations:
ULS1 = 1.35*LC1+1.5*LC2
SLS1 = 1*LC1+1*LC2
ULS2 = 1*LC1+1*LC2+1*LC4
ULS3 = 1*LC1+1*LC2-1*LC4
ULS4 = 1*LC1+1*LC2+0.3*LC4
ULS5 = 1*LC1+1*LC2-0.3*LC4
Maximum beam allowable deflection:
200
150
1.5
Local
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
547
Contact:
Page:
3 of 14
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Parts List:
Channels
Description
Item
Pos
Qty
Girder MI-90 3m
304798
3.5
0.37
Bracket MIC-C90-D-2000
267793
49.5
2.00
Item
Weight [kg]
Node No.
304803
5.0
2,3
Beam No.
Connections
Pos
Qty
Description
Connector MIC-90-U
Fixations
Pos
Qty
Description
Safety stud anchor HST M16X140/25
Item
Fixation text
371593
Accessories
Pos
Qty
Description
Girder end cap MIA-EC90
Item
432077
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
0.0
0.00
548
Contact:
Page:
4 of 14
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Static model:
Node
Hinged axis
Connection
No.
0.0000
0.0000
0.0000
0.0000
0.0000
1.9600
Y,Z
MIC-90-U
0.5000
0.0000
1.9600
Y,Z
MIC-90-U
0.5000
0.0000
0.0000
Building material
MIC-C90-D-2000
Concrete
MIC-C90-D-2000
Concrete
Beams
Beam
Channel
No.
Length
Rotation
Iy
Iz
[m]
[]
[cm]
[cm]
[cm]
[kN/m]
MIC-C90-D-2000
1.96
1,003
115
115
210,000,000.
MI-90 3m
0.50
1,003
115
115
210,000,000.
MIC-C90-D-2000
1.96
180
1,003
115
115
210,000,000.
No.
Position
Forces [kN]
Moments [kNm]
Forces [kN]
[m]
Ex
Ey
0.25
0.0000
0.0000
14.0500
0.0000
0.0000
0.0000
0.0000
1.6200
Load description
No.
Type
Description
Size [mm]
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Span [m]
549
Contact:
Page:
5 of 14
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
No.
Date:
Type
Description
Size [mm]
Span [m]
09-Mar-15
Custom load
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
550
Contact:
Page:
6 of 14
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Calculation summary
1 Beams
(1) Connections
[1] Supports
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MIC-C90-D-2000
5.03
0.0
0.00
MI-90 3m
49.04
0.0
0.00
MIC-C90-D-2000
5.03
0.0
0.00
(Design load)
Beam No.
MIC-90-U
MIC-C90-D-
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MIC-C90-D-
10.7720
0.0000
0.0000
0.0000
0.0000
0.0000
24.00
MIC-90-U
0.0000
0.0000
10.5600
0.0000
0.0000
0.0000
59.00
0.0000
0.0000
-10.5600
0.0000
0.0000
0.0000
59.00
10.7720
0.0000
0.0000
0.0000
0.0000
0.0000
24.00
Support No.
(Design load)
Designation
Forces[kN]
Moments[kNm]
MIC-C90-D-
0.0000
0.0000
10.7720
0.0000
0.0000
0.0000
MIC-C90-D-
0.0000
0.0000
10.7720
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
551
Contact:
Page:
7 of 14
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Designation
Stress
[%]
[]
[%]
MIC-C90-D-2000
32.41
0.0
0.00
MI-90 3m
35.33
0.0
0.00
MIC-C90-D-2000
32.41
0.0
0.00
Node No.
Beam No.
MIC-C90-D-
MIC-90-U
MIC-90-U
MIC-C90-D-
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
7.1990
0.8100
0.0000
0.0000
0.0000
1.5880
64.00
0.0000
-0.8100
7.0400
0.0000
0.0000
0.0000
39.00
0.0000
0.8100
-7.0400
0.0000
0.0000
0.0000
39.00
7.1990
-0.8100
0.0000
0.0000
0.0000
-1.5880
64.00
(Design load)
Torsion
(Design load)
Node No.
Torsion
Forces[kN]
Designation
Moments[kNm]
MIC-C90-D-
0.0000
0.8100
7.1990
-1.5880
0.0000
0.0000
MIC-C90-D-
0.0000
0.8100
7.1990
-1.5880
0.0000
0.0000
Designation
Stress
[%]
[]
[%]
MIC-C90-D-2000
32.41
0.0
0.00
MI-90 3m
35.31
0.0
0.00
MIC-C90-D-2000
32.41
0.0
0.00
Beam No.
3
4
Torsion
Torsion
(Design load)
Designation
Forces[kN]
Moments[kNm]
Utilization[%]
MIC-C90-D-
7.1990
-0.8100
0.0000
0.0000
0.0000
-1.5880
64.00
MIC-90-U
0.0000
0.8100
7.0400
0.0000
0.0000
0.0000
39.00
MIC-90-U
0.0000
-0.8100
-7.0400
0.0000
0.0000
0.0000
39.00
MIC-C90-D-
7.1990
0.8100
0.0000
0.0000
0.0000
1.5880
64.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
552
Contact:
Page:
8 of 14
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Support No.
09-Mar-15
Forces[kN]
Designation
Moments[kNm]
MIC-C90-D-
0.0000
-0.8100
7.1990
1.5880
0.0000
0.0000
MIC-C90-D-
0.0000
-0.8100
7.1990
1.5880
0.0000
0.0000
Designation
Stress
[%]
[]
[%]
MIC-C90-D-2000
12.13
0.0
0.00
MI-90 3m
33.48
0.0
0.00
MIC-C90-D-2000
12.13
0.0
0.00
Beam No.
Torsion
(Design load)
Torsion
Forces[kN]
Designation
MIC-C90-D-
Moments[kNm]
Utilization[%]
7.1990
0.2430
0.0000
0.0000
0.0000
0.4760
31.00
MIC-90-U
0.0000
-0.2400
7.0400
0.0000
0.0000
0.0000
39.00
MIC-90-U
0.0000
0.2400
-7.0400
0.0000
0.0000
0.0000
39.00
MIC-C90-D-
7.1990
-0.2430
0.0000
0.0000
0.0000
-0.4760
31.00
(Design load)
Support No.
Forces[kN]
Designation
Moments[kNm]
MIC-C90-D-
0.0000
0.2430
7.1990
-0.4760
0.0000
0.0000
MIC-C90-D-
0.0000
0.2430
7.1990
-0.4760
0.0000
0.0000
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MIC-C90-D-2000
12.13
0.0
0.00
MI-90 3m
33.46
0.0
0.00
MIC-C90-D-2000
12.13
0.0
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
553
Contact:
Page:
9 of 14
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Beam No.
3
4
09-Mar-15
Designation
Forces[kN]
Moments[kNm]
Utilization[%]
MIC-C90-D-
7.1990
-0.2430
0.0000
0.0000
0.0000
-0.4760
31.00
MIC-90-U
0.0000
0.2400
7.0400
0.0000
0.0000
0.0000
39.00
MIC-90-U
0.0000
-0.2400
-7.0400
0.0000
0.0000
0.0000
39.00
MIC-C90-D-
7.1990
0.2430
0.0000
0.0000
0.0000
0.4760
31.00
Support No.
(Design load)
Designation
Forces[kN]
Moments[kNm]
MIC-C90-D-
0.0000
-0.2430
7.1990
0.4760
0.0000
0.0000
MIC-C90-D-
0.0000
-0.2430
7.1990
0.4760
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
554
Contact:
Page:
10 of 14
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Stress:
Beam No. 1: MIC-C90-D-2000
Position
[m]
0.00
0.00
0.00
Actual
[kN/m]
69,220.000
1,870.000
69,230.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
32.40
1.52
32.41
[m]
0.25
0.00
0.25
Actual
[kN/m]
-103,000.000
-24,390.000
104,760.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
48.21
19.77
49.04
[m]
0.00
0.00
0.00
Actual
[kN/m]
69,220.000
-1,870.000
69,230.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
32.40
1.52
32.41
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
555
Contact:
Page:
11 of 14
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Displacement SLS1:
Beam No.
Value
Position [m]
u-X
u-Y
u-Z
[%]
Max. Displacement
1.96
0.0
0.0
0.1
0.68
Max. Displacement
0.25
0.0
0.0
0.2
8.08
Max. Displacement
1.96
0.0
0.0
0.1
0.68
Displacement [mm]
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Utilization
556
Contact:
Page:
12 of 14
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
(Design load)
Support load:
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
0.0000
10.7720
0.0000
0.0000
0.0000
0.0000
0.0000
10.7720
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
0.8100
7.1990
-1.5880
0.0000
0.0000
0.0000
0.8100
7.1990
-1.5880
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
-0.8100
7.1990
1.5880
0.0000
0.0000
0.0000
-0.8100
7.1990
1.5880
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
0.2430
7.1990
-0.4760
0.0000
0.0000
0.0000
0.2430
7.1990
-0.4760
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
557
Contact:
Page:
13 of 14
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
-0.2430
7.1990
0.4760
0.0000
0.0000
0.0000
-0.2430
7.1990
0.4760
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
558
Contact:
Page:
14 of 14
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
559
Contact:
Page:
1 of 14
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
560
Contact:
Page:
2 of 14
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Calculation factors:
Load type:
Seismic
LC1: g
LC2: q
LC3: Ex
Earthquake in X-direction
LC4: Ey
Earthquake in Y-direction
1.1
1.5
1.35
Load combinations:
ULS1 = 1.35*LC1+1.5*LC2
SLS1 = 1*LC1+1*LC2
ULS2 = 1*LC1+1*LC2+1*LC3
ULS3 = 1*LC1+1*LC2-1*LC3
ULS4 = 1*LC1+1*LC2+0.3*LC3
ULS5 = 1*LC1+1*LC2-0.3*LC3
Maximum beam allowable deflection:
200
150
1.5
Local
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
561
Contact:
Page:
3 of 14
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Parts List:
Channels
Description
Item
Pos
Qty
Girder MI-90 3m
304798
3.5
0.37
Bracket MIC-C90-D-2000
267793
49.5
2.00
Item
Weight [kg]
Node No.
304803
5.0
2,3
Beam No.
Connections
Pos
Qty
Description
Connector MIC-90-U
Fixations
Pos
Qty
Description
Safety stud anchor HST M16X140/25
Item
Fixation text
371593
Accessories
Pos
Qty
Description
Girder end cap MIA-EC90
Item
432077
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
0.0
0.00
562
Contact:
Page:
4 of 14
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Static model:
Node
Hinged axis
Connection
No.
0.0000
0.0000
0.0000
0.0000
0.0000
1.9600
Y,Z
MIC-90-U
0.5000
0.0000
1.9600
Y,Z
MIC-90-U
0.5000
0.0000
0.0000
Building material
MIC-C90-D-2000
Concrete
MIC-C90-D-2000
Concrete
Beams
Beam
Channel
No.
Length
Rotation
Iy
Iz
[m]
[]
[cm]
[cm]
[cm]
[kN/m]
MIC-C90-D-2000
1.96
1,003
115
115
210,000,000.
MI-90 3m
0.50
1,003
115
115
210,000,000.
MIC-C90-D-2000
1.96
180
1,003
115
115
210,000,000.
No.
Position
Forces [kN]
Moments [kNm]
Forces [kN]
[m]
Ex
Ey
0.25
0.0000
0.0000
14.0500
0.0000
0.0000
0.0000
1.6200
0.0000
Load description
No.
Type
Description
Size [mm]
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Span [m]
563
Contact:
Page:
5 of 14
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
No.
Date:
Type
Description
Size [mm]
Span [m]
09-Mar-15
Custom load
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
564
Contact:
Page:
6 of 14
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Calculation summary
1 Beams
(1) Connections
[1] Supports
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MIC-C90-D-2000
5.03
0.0
0.00
MI-90 3m
49.04
0.0
0.00
MIC-C90-D-2000
5.03
0.0
0.00
(Design load)
Beam No.
MIC-90-U
MIC-C90-D-
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MIC-C90-D-
10.7720
0.0000
0.0000
0.0000
0.0000
0.0000
24.00
MIC-90-U
0.0000
0.0000
10.5600
0.0000
0.0000
0.0000
59.00
0.0000
0.0000
-10.5600
0.0000
0.0000
0.0000
59.00
10.7720
0.0000
0.0000
0.0000
0.0000
0.0000
24.00
Support No.
(Design load)
Designation
Forces[kN]
Moments[kNm]
MIC-C90-D-
0.0000
0.0000
10.7720
0.0000
0.0000
0.0000
MIC-C90-D-
0.0000
0.0000
10.7720
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
565
Contact:
Page:
7 of 14
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Designation
Stress
[%]
[]
[%]
MIC-C90-D-2000
32.41
0.0
0.00
MI-90 3m
33.06
0.0
0.00
MIC-C90-D-2000
32.41
0.0
0.00
Beam No.
3
4
Torsion
(Design load)
Torsion
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MIC-C90-D-
7.1990
0.0000
-0.8100
0.0000
1.5880
0.0000
64.00
MIC-90-U
0.8100
0.0000
7.0400
0.0000
0.0000
0.0000
66.00
MIC-90-U
-0.8100
0.0000
-7.0400
0.0000
0.0000
0.0000
39.00
MIC-C90-D-
7.1990
0.0000
0.8100
0.0000
-1.5880
0.0000
64.00
(Design load)
Support No.
Forces[kN]
Designation
Moments[kNm]
MIC-C90-D-
0.8100
0.0000
7.1990
0.0000
1.5880
0.0000
MIC-C90-D-
0.8100
0.0000
7.1990
0.0000
1.5880
0.0000
Designation
Stress
[%]
[]
[%]
MIC-C90-D-2000
32.41
0.0
0.00
MI-90 3m
33.06
0.0
0.00
MIC-C90-D-2000
32.41
0.0
0.00
Beam No.
Torsion
Torsion
(Design load)
Designation
Forces[kN]
Moments[kNm]
Utilization[%]
MIC-C90-D-
7.1990
0.0000
0.8100
0.0000
-1.5880
0.0000
64.00
MIC-90-U
-0.8100
0.0000
7.0400
0.0000
0.0000
0.0000
39.00
MIC-90-U
0.8100
0.0000
-7.0400
0.0000
0.0000
0.0000
66.00
MIC-C90-D-
7.1990
0.0000
-0.8100
0.0000
1.5880
0.0000
64.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
566
Contact:
Page:
8 of 14
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Support No.
09-Mar-15
Forces[kN]
Designation
Moments[kNm]
MIC-C90-D-
-0.8100
0.0000
7.1990
0.0000
-1.5880
0.0000
MIC-C90-D-
-0.8100
0.0000
7.1990
0.0000
-1.5880
0.0000
Designation
Stress
[%]
[]
[%]
MIC-C90-D-2000
12.13
0.0
0.00
MI-90 3m
32.80
0.0
0.00
MIC-C90-D-2000
12.13
0.0
0.00
Beam No.
Torsion
(Design load)
Torsion
Forces[kN]
Designation
MIC-C90-D-
Moments[kNm]
Utilization[%]
7.1990
0.0000
-0.2430
0.0000
0.4760
0.0000
31.00
MIC-90-U
0.2400
0.0000
7.0400
0.0000
0.0000
0.0000
44.00
MIC-90-U
-0.2400
0.0000
-7.0400
0.0000
0.0000
0.0000
39.00
MIC-C90-D-
7.1990
0.0000
0.2430
0.0000
-0.4760
0.0000
31.00
(Design load)
Support No.
Forces[kN]
Designation
Moments[kNm]
MIC-C90-D-
0.2430
0.0000
7.1990
0.0000
0.4760
0.0000
MIC-C90-D-
0.2430
0.0000
7.1990
0.0000
0.4760
0.0000
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MIC-C90-D-2000
12.13
0.0
0.00
MI-90 3m
32.80
0.0
0.00
MIC-C90-D-2000
12.13
0.0
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
567
Contact:
Page:
9 of 14
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Beam No.
09-Mar-15
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MIC-C90-D-
7.1990
0.0000
0.2430
0.0000
-0.4760
0.0000
31.00
MIC-90-U
-0.2400
0.0000
7.0400
0.0000
0.0000
0.0000
39.00
MIC-90-U
0.2400
0.0000
-7.0400
0.0000
0.0000
0.0000
44.00
MIC-C90-D-
7.1990
0.0000
-0.2430
0.0000
0.4760
0.0000
31.00
Support No.
(Design load)
Designation
Forces[kN]
Moments[kNm]
MIC-C90-D-
-0.2430
0.0000
7.1990
0.0000
-0.4760
0.0000
MIC-C90-D-
-0.2430
0.0000
7.1990
0.0000
-0.4760
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
568
Contact:
Page:
10 of 14
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Stress:
Beam No. 1: MIC-C90-D-2000
Position
[m]
0.00
0.00
0.00
Actual
[kN/m]
69,220.000
1,870.000
69,230.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
32.40
1.52
32.41
[m]
0.25
0.00
0.25
Actual
[kN/m]
-103,000.000
-24,390.000
104,760.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
48.21
19.77
49.04
[m]
0.00
0.00
0.00
Actual
[kN/m]
69,220.000
-1,870.000
69,230.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
32.40
1.52
32.41
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
569
Contact:
Page:
11 of 14
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Displacement SLS1:
Beam No.
Value
Position [m]
u-X
u-Y
u-Z
[%]
Max. Displacement
1.96
0.0
0.0
0.1
0.68
Max. Displacement
0.25
0.0
0.0
0.2
8.08
Max. Displacement
1.96
0.0
0.0
0.1
0.68
Displacement [mm]
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Utilization
570
Contact:
Page:
12 of 14
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
(Design load)
Support load:
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
0.0000
10.7720
0.0000
0.0000
0.0000
0.0000
0.0000
10.7720
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.8100
0.0000
7.1990
0.0000
1.5880
0.0000
0.8100
0.0000
7.1990
0.0000
1.5880
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
-0.8100
0.0000
7.1990
0.0000
-1.5880
0.0000
-0.8100
0.0000
7.1990
0.0000
-1.5880
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.2430
0.0000
7.1990
0.0000
0.4760
0.0000
0.2430
0.0000
7.1990
0.0000
0.4760
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
571
Contact:
Page:
13 of 14
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
-0.2430
0.0000
7.1990
0.0000
-0.4760
0.0000
-0.2430
0.0000
7.1990
0.0000
-0.4760
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
572
Contact:
Page:
14 of 14
Project:
Sec. Bldg
CHW 250 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
573
Contact:
Page:
1 of 14
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
574
Contact:
Page:
2 of 14
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Calculation factors:
Load type:
Seismic
LC1: g
LC2: q
LC3: Ex
Earthquake in X-direction
LC4: Ey
Earthquake in Y-direction
1.1
1.5
1.35
Load combinations:
ULS1 = 1.35*LC1+1.5*LC2
SLS1 = 1*LC1+1*LC2
ULS2 = 1*LC1+1*LC2+1*LC4
ULS3 = 1*LC1+1*LC2-1*LC4
ULS4 = 1*LC1+1*LC2+0.3*LC4
ULS5 = 1*LC1+1*LC2-0.3*LC4
Maximum beam allowable deflection:
200
150
1.5
Local
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
575
Contact:
Page:
3 of 14
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Parts List:
Channels
Description
Item
Pos
Qty
Girder MI-90 3m
304798
4.5
0.47
Bracket MIC-C90-D-2000
267793
49.5
2.00
Item
Weight [kg]
Node No.
304803
5.0
2,3
Beam No.
Connections
Pos
Qty
Description
Connector MIC-90-U
Fixations
Pos
Qty
Description
Safety stud anchor HST M16X140/25
Item
Fixation text
371593
Accessories
Pos
Qty
Description
Girder end cap MIA-EC90
Item
432077
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
0.0
0.00
576
Contact:
Page:
4 of 14
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Static model:
Node
Hinged axis
Connection
No.
0.0000
0.0000
0.0000
0.0000
0.0000
1.9600
Y,Z
MIC-90-U
0.6000
0.0000
1.9600
Y,Z
MIC-90-U
0.6000
0.0000
0.0000
Building material
MIC-C90-D-2000
Concrete
MIC-C90-D-2000
Concrete
Beams
Beam
Channel
No.
Length
Rotation
Iy
Iz
[m]
[]
[cm]
[cm]
[cm]
[kN/m]
MIC-C90-D-2000
1.96
1,003
115
115
210,000,000.
MI-90 3m
0.60
1,003
115
115
210,000,000.
MIC-C90-D-2000
1.96
180
1,003
115
115
210,000,000.
No.
Position
Forces [kN]
Moments [kNm]
Forces [kN]
[m]
Ex
Ey
0.30
0.0000
0.0000
18.8000
0.0000
0.0000
0.0000
0.0000
2.1600
Load description
No.
Type
Description
Size [mm]
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Span [m]
577
Contact:
Page:
5 of 14
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
No.
Date:
Type
Description
Size [mm]
Span [m]
09-Mar-15
Custom load
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
578
Contact:
Page:
6 of 14
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Calculation summary
1 Beams
(1) Connections
[1] Supports
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MIC-C90-D-2000
6.70
0.0
0.00
MI-90 3m
78.17
0.0
0.00
MIC-C90-D-2000
6.70
0.0
0.00
(Design load)
Beam No.
MIC-90-U
MIC-C90-D-
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MIC-C90-D-
14.3400
0.0000
0.0000
0.0000
0.0000
0.0000
33.00
MIC-90-U
0.0000
0.0000
14.1300
0.0000
0.0000
0.0000
78.00
0.0000
0.0000
-14.1300
0.0000
0.0000
0.0000
78.00
14.3400
0.0000
0.0000
0.0000
0.0000
0.0000
33.00
Support No.
(Design load)
Designation
Forces[kN]
Moments[kNm]
MIC-C90-D-
0.0000
0.0000
14.3400
0.0000
0.0000
0.0000
MIC-C90-D-
0.0000
0.0000
14.3400
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
579
Contact:
Page:
7 of 14
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Designation
Stress
[%]
[]
[%]
MIC-C90-D-2000
43.20
0.0
0.00
MI-90 3m
56.43
0.0
0.00
MIC-C90-D-2000
43.20
0.0
0.00
Node No.
Beam No.
MIC-C90-D-
MIC-90-U
MIC-90-U
MIC-C90-D-
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
9.5780
1.0800
0.0000
0.0000
0.0000
2.1170
86.00
0.0000
-1.0800
9.4200
0.0000
0.0000
0.0000
52.00
0.0000
1.0800
-9.4200
0.0000
0.0000
0.0000
52.00
9.5780
-1.0800
0.0000
0.0000
0.0000
-2.1170
86.00
(Design load)
Torsion
(Design load)
Node No.
Torsion
Forces[kN]
Designation
Moments[kNm]
MIC-C90-D-
0.0000
1.0800
9.5780
-2.1170
0.0000
0.0000
MIC-C90-D-
0.0000
1.0800
9.5780
-2.1170
0.0000
0.0000
Designation
Stress
[%]
[]
[%]
MIC-C90-D-2000
43.20
0.0
0.00
MI-90 3m
56.41
0.0
0.00
MIC-C90-D-2000
43.20
0.0
0.00
Beam No.
3
4
Torsion
Torsion
(Design load)
Designation
Forces[kN]
Moments[kNm]
Utilization[%]
MIC-C90-D-
9.5780
-1.0800
0.0000
0.0000
0.0000
-2.1170
86.00
MIC-90-U
0.0000
1.0800
9.4200
0.0000
0.0000
0.0000
52.00
MIC-90-U
0.0000
-1.0800
-9.4200
0.0000
0.0000
0.0000
52.00
MIC-C90-D-
9.5780
1.0800
0.0000
0.0000
0.0000
2.1170
86.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
580
Contact:
Page:
8 of 14
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Support No.
09-Mar-15
Forces[kN]
Designation
Moments[kNm]
MIC-C90-D-
0.0000
-1.0800
9.5780
2.1170
0.0000
0.0000
MIC-C90-D-
0.0000
-1.0800
9.5780
2.1170
0.0000
0.0000
Designation
Stress
[%]
[]
[%]
MIC-C90-D-2000
16.16
0.0
0.00
MI-90 3m
53.46
0.0
0.00
MIC-C90-D-2000
16.16
0.0
0.00
Beam No.
Torsion
(Design load)
Torsion
Forces[kN]
Designation
MIC-C90-D-
Moments[kNm]
Utilization[%]
9.5780
0.3240
0.0000
0.0000
0.0000
0.6350
41.00
MIC-90-U
0.0000
-0.3200
9.4200
0.0000
0.0000
0.0000
52.00
MIC-90-U
0.0000
0.3200
-9.4200
0.0000
0.0000
0.0000
52.00
MIC-C90-D-
9.5780
-0.3240
0.0000
0.0000
0.0000
-0.6350
41.00
(Design load)
Support No.
Forces[kN]
Designation
Moments[kNm]
MIC-C90-D-
0.0000
0.3240
9.5780
-0.6350
0.0000
0.0000
MIC-C90-D-
0.0000
0.3240
9.5780
-0.6350
0.0000
0.0000
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MIC-C90-D-2000
16.16
0.0
0.00
MI-90 3m
53.44
0.0
0.00
MIC-C90-D-2000
16.16
0.0
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
581
Contact:
Page:
9 of 14
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Beam No.
3
4
09-Mar-15
Designation
Forces[kN]
Moments[kNm]
Utilization[%]
MIC-C90-D-
9.5780
-0.3240
0.0000
0.0000
0.0000
-0.6350
41.00
MIC-90-U
0.0000
0.3200
9.4200
0.0000
0.0000
0.0000
52.00
MIC-90-U
0.0000
-0.3200
-9.4200
0.0000
0.0000
0.0000
52.00
MIC-C90-D-
9.5780
0.3240
0.0000
0.0000
0.0000
0.6350
41.00
Support No.
(Design load)
Designation
Forces[kN]
Moments[kNm]
MIC-C90-D-
0.0000
-0.3240
9.5780
0.6350
0.0000
0.0000
MIC-C90-D-
0.0000
-0.3240
9.5780
0.6350
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
582
Contact:
Page:
10 of 14
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Stress:
Beam No. 1: MIC-C90-D-2000
Position
[m]
0.00
0.00
0.00
Actual
[kN/m]
92,270.000
2,490.000
92,290.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
43.19
2.02
43.20
[m]
0.30
0.00
0.30
Actual
[kN/m]
-165,040.000
-32,630.000
167,000.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
77.25
26.46
78.17
[m]
0.00
0.00
0.00
Actual
[kN/m]
92,270.000
-2,490.000
92,290.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
43.19
2.02
43.20
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
583
Contact:
Page:
11 of 14
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Displacement SLS1:
Beam No.
Value
Position [m]
Max. Displacement
1.96
Displacement [mm]
Utilization
u-X
u-Y
u-Z
[%]
0.0
0.0
0.1
0.90
Max. Displacement
0.30
0.0
0.0
0.4
14.37
Max. Displacement
1.96
0.0
0.0
0.1
0.90
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
584
Contact:
Page:
12 of 14
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
(Design load)
Support load:
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
0.0000
14.3400
0.0000
0.0000
0.0000
0.0000
0.0000
14.3400
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
1.0800
9.5780
-2.1170
0.0000
0.0000
0.0000
1.0800
9.5780
-2.1170
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
-1.0800
9.5780
2.1170
0.0000
0.0000
0.0000
-1.0800
9.5780
2.1170
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
0.3240
9.5780
-0.6350
0.0000
0.0000
0.0000
0.3240
9.5780
-0.6350
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
585
Contact:
Page:
13 of 14
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
-0.3240
9.5780
0.6350
0.0000
0.0000
0.0000
-0.3240
9.5780
0.6350
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
586
Contact:
Page:
14 of 14
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
587
Contact:
Page:
1 of 14
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
588
Contact:
Page:
2 of 14
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Calculation factors:
Load type:
Seismic
LC1: g
LC2: q
LC3: Ex
Earthquake in X-direction
LC4: Ey
Earthquake in Y-direction
1.1
1.5
1.35
Load combinations:
ULS1 = 1.35*LC1+1.5*LC2
SLS1 = 1*LC1+1*LC2
ULS2 = 1*LC1+1*LC2+1*LC3
ULS3 = 1*LC1+1*LC2-1*LC3
ULS4 = 1*LC1+1*LC2+0.3*LC3
ULS5 = 1*LC1+1*LC2-0.3*LC3
Maximum beam allowable deflection:
200
150
1.5
Local
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
589
Contact:
Page:
3 of 14
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Parts List:
Channels
Description
Item
Pos
Qty
Girder MI-90 3m
304798
4.5
0.47
Bracket MIC-C90-D-2000
267793
49.5
2.00
Item
Weight [kg]
Node No.
304803
5.0
2,3
Beam No.
Connections
Pos
Qty
Description
Connector MIC-90-U
Fixations
Pos
Qty
Description
Safety stud anchor HST M16X140/25
Item
Fixation text
371593
Accessories
Pos
Qty
Description
Girder end cap MIA-EC90
Item
432077
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
0.0
0.00
590
Contact:
Page:
4 of 14
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Static model:
Node
Hinged axis
Connection
No.
0.0000
0.0000
0.0000
0.0000
0.0000
1.9600
Y,Z
MIC-90-U
0.6000
0.0000
1.9600
Y,Z
MIC-90-U
0.6000
0.0000
0.0000
Building material
MIC-C90-D-2000
Concrete
MIC-C90-D-2000
Concrete
Beams
Beam
Channel
No.
Length
Rotation
Iy
Iz
[m]
[]
[cm]
[cm]
[cm]
[kN/m]
MIC-C90-D-2000
1.96
1,003
115
115
210,000,000.
MI-90 3m
0.60
1,003
115
115
210,000,000.
MIC-C90-D-2000
1.96
180
1,003
115
115
210,000,000.
No.
Position
Forces [kN]
Moments [kNm]
Forces [kN]
[m]
Ex
Ey
0.30
0.0000
0.0000
18.8000
0.0000
0.0000
0.0000
2.1600
0.0000
Load description
No.
Type
Description
Size [mm]
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Span [m]
591
Contact:
Page:
5 of 14
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
No.
Date:
Type
Description
Size [mm]
Span [m]
09-Mar-15
Custom load
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
592
Contact:
Page:
6 of 14
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Calculation summary
1 Beams
(1) Connections
[1] Supports
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MIC-C90-D-2000
6.70
0.0
0.00
MI-90 3m
78.17
0.0
0.00
MIC-C90-D-2000
6.70
0.0
0.00
(Design load)
Beam No.
MIC-90-U
MIC-C90-D-
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MIC-C90-D-
14.3400
0.0000
0.0000
0.0000
0.0000
0.0000
33.00
MIC-90-U
0.0000
0.0000
14.1300
0.0000
0.0000
0.0000
78.00
0.0000
0.0000
-14.1300
0.0000
0.0000
0.0000
78.00
14.3400
0.0000
0.0000
0.0000
0.0000
0.0000
33.00
Support No.
(Design load)
Designation
Forces[kN]
Moments[kNm]
MIC-C90-D-
0.0000
0.0000
14.3400
0.0000
0.0000
0.0000
MIC-C90-D-
0.0000
0.0000
14.3400
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
593
Contact:
Page:
7 of 14
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Designation
Stress
[%]
[]
[%]
MIC-C90-D-2000
43.20
0.0
0.00
MI-90 3m
52.61
0.0
0.00
MIC-C90-D-2000
43.20
0.0
0.00
Beam No.
3
4
Torsion
(Design load)
Torsion
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MIC-C90-D-
9.5780
0.0000
-1.0800
0.0000
2.1170
0.0000
86.00
MIC-90-U
1.0800
0.0000
9.4200
0.0000
0.0000
0.0000
88.00
MIC-90-U
-1.0800
0.0000
-9.4200
0.0000
0.0000
0.0000
52.00
MIC-C90-D-
9.5780
0.0000
1.0800
0.0000
-2.1170
0.0000
86.00
(Design load)
Support No.
Forces[kN]
Designation
Moments[kNm]
MIC-C90-D-
1.0800
0.0000
9.5780
0.0000
2.1170
0.0000
MIC-C90-D-
1.0800
0.0000
9.5780
0.0000
2.1170
0.0000
Designation
Stress
[%]
[]
[%]
MIC-C90-D-2000
43.20
0.0
0.00
MI-90 3m
52.61
0.0
0.00
MIC-C90-D-2000
43.20
0.0
0.00
Beam No.
Torsion
Torsion
(Design load)
Designation
Forces[kN]
Moments[kNm]
Utilization[%]
MIC-C90-D-
9.5780
0.0000
1.0800
0.0000
-2.1170
0.0000
86.00
MIC-90-U
-1.0800
0.0000
9.4200
0.0000
0.0000
0.0000
52.00
MIC-90-U
1.0800
0.0000
-9.4200
0.0000
0.0000
0.0000
88.00
MIC-C90-D-
9.5780
0.0000
-1.0800
0.0000
2.1170
0.0000
86.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
594
Contact:
Page:
8 of 14
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Support No.
09-Mar-15
Forces[kN]
Designation
Moments[kNm]
MIC-C90-D-
-1.0800
0.0000
9.5780
0.0000
-2.1170
0.0000
MIC-C90-D-
-1.0800
0.0000
9.5780
0.0000
-2.1170
0.0000
Designation
Stress
[%]
[]
[%]
MIC-C90-D-2000
16.16
0.0
0.00
MI-90 3m
52.26
0.0
0.00
MIC-C90-D-2000
16.16
0.0
0.00
Beam No.
Torsion
(Design load)
Torsion
Forces[kN]
Designation
MIC-C90-D-
Moments[kNm]
Utilization[%]
9.5780
0.0000
-0.3240
0.0000
0.6350
0.0000
41.00
MIC-90-U
0.3200
0.0000
9.4200
0.0000
0.0000
0.0000
58.00
MIC-90-U
-0.3200
0.0000
-9.4200
0.0000
0.0000
0.0000
52.00
MIC-C90-D-
9.5780
0.0000
0.3240
0.0000
-0.6350
0.0000
41.00
(Design load)
Support No.
Forces[kN]
Designation
Moments[kNm]
MIC-C90-D-
0.3240
0.0000
9.5780
0.0000
0.6350
0.0000
MIC-C90-D-
0.3240
0.0000
9.5780
0.0000
0.6350
0.0000
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MIC-C90-D-2000
16.16
0.0
0.00
MI-90 3m
52.26
0.0
0.00
MIC-C90-D-2000
16.16
0.0
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
595
Contact:
Page:
9 of 14
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Beam No.
09-Mar-15
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MIC-C90-D-
9.5780
0.0000
0.3240
0.0000
-0.6350
0.0000
41.00
MIC-90-U
-0.3200
0.0000
9.4200
0.0000
0.0000
0.0000
52.00
MIC-90-U
0.3200
0.0000
-9.4200
0.0000
0.0000
0.0000
58.00
MIC-C90-D-
9.5780
0.0000
-0.3240
0.0000
0.6350
0.0000
41.00
Support No.
(Design load)
Designation
Forces[kN]
Moments[kNm]
MIC-C90-D-
-0.3240
0.0000
9.5780
0.0000
-0.6350
0.0000
MIC-C90-D-
-0.3240
0.0000
9.5780
0.0000
-0.6350
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
596
Contact:
Page:
10 of 14
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Stress:
Beam No. 1: MIC-C90-D-2000
Position
[m]
0.00
0.00
0.00
Actual
[kN/m]
92,270.000
2,490.000
92,290.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
43.19
2.02
43.20
[m]
0.30
0.00
0.30
Actual
[kN/m]
-165,040.000
-32,630.000
167,000.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
77.25
26.46
78.17
[m]
0.00
0.00
0.00
Actual
[kN/m]
92,270.000
-2,490.000
92,290.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
43.19
2.02
43.20
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
597
Contact:
Page:
11 of 14
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Displacement SLS1:
Beam No.
Value
Position [m]
Max. Displacement
1.96
Displacement [mm]
Utilization
u-X
u-Y
u-Z
[%]
0.0
0.0
0.1
0.90
Max. Displacement
0.30
0.0
0.0
0.4
14.37
Max. Displacement
1.96
0.0
0.0
0.1
0.90
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
598
Contact:
Page:
12 of 14
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
(Design load)
Support load:
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
0.0000
14.3400
0.0000
0.0000
0.0000
0.0000
0.0000
14.3400
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
1.0800
0.0000
9.5780
0.0000
2.1170
0.0000
1.0800
0.0000
9.5780
0.0000
2.1170
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
-1.0800
0.0000
9.5780
0.0000
-2.1170
0.0000
-1.0800
0.0000
9.5780
0.0000
-2.1170
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.3240
0.0000
9.5780
0.0000
0.6350
0.0000
0.3240
0.0000
9.5780
0.0000
0.6350
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
599
Contact:
Page:
13 of 14
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
-0.3240
0.0000
9.5780
0.0000
-0.6350
0.0000
-0.3240
0.0000
9.5780
0.0000
-0.6350
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
600
Contact:
Page:
14 of 14
Project:
Sec. Bldg
CHW 300 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
601
Contact:
Page:
1 of 14
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
602
Contact:
Page:
2 of 14
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Calculation factors:
Load type:
Seismic
LC1: g
LC2: q
LC3: Ex
Earthquake in X-direction
LC4: Ey
Earthquake in Y-direction
1.1
1.5
1.35
Load combinations:
ULS1 = 1.35*LC1+1.5*LC2
SLS1 = 1*LC1+1*LC2
ULS2 = 1*LC1+1*LC2+1*LC4
ULS3 = 1*LC1+1*LC2-1*LC4
ULS4 = 1*LC1+1*LC2+0.3*LC4
ULS5 = 1*LC1+1*LC2-0.3*LC4
Maximum beam allowable deflection:
200
150
1.5
Local
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
603
Contact:
Page:
3 of 14
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Parts List:
Channels
Description
Item
Pos
Qty
Girder MI-120 6m
304801
7.2
0.57
Bracket MIC-C90-D-2000
267793
49.5
2.00
Item
Weight [kg]
Node No.
304804
5.6
2,3
Beam No.
Connections
Pos
Qty
Description
Connector MIC-120-U
Fixations
Pos
Qty
Description
Safety stud anchor HST M16X140/25
Item
Fixation text
371593
Accessories
Pos
Qty
Description
Girder end cap MIA-EC90
Item
432077
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
0.0
0.00
604
Contact:
Page:
4 of 14
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Static model:
Node
Hinged axis
Connection
No.
0.0000
0.0000
0.0000
0.0000
0.0000
1.9400
Y,Z
MIC-120-U
0.7000
0.0000
1.9400
Y,Z
MIC-120-U
0.7000
0.0000
0.0000
Building material
MIC-C90-D-2000
Concrete
MIC-C90-D-2000
Concrete
Beams
Beam
Channel
No.
Length
Rotation
Iy
Iz
[m]
[]
[cm]
[cm]
[cm]
[kN/m]
MIC-C90-D-2000
1.94
1,003
115
115
210,000,000.
MI-120 6m
0.70
1,376
266
174
210,000,000.
MIC-C90-D-2000
1.94
180
1,003
115
115
210,000,000.
No.
Position
Forces [kN]
Moments [kNm]
Forces [kN]
[m]
Ex
Ey
0.35
0.0000
0.0000
23.3250
0.0000
0.0000
0.0000
0.0000
0.6700
Load description
No.
Type
Description
Size [mm]
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Span [m]
605
Contact:
Page:
5 of 14
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
No.
Date:
Type
Description
Size [mm]
Span [m]
09-Mar-15
Custom load
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
606
Contact:
Page:
6 of 14
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Calculation summary
1 Beams
(1) Connections
[1] Supports
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MIC-C90-D-2000
8.29
0.0
0.00
MI-120 6m
65.42
0.0
0.00
MIC-C90-D-2000
8.29
0.0
0.00
(Design load)
Beam No.
MIC-120-U
MIC-C90-D-
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MIC-C90-D-
17.7510
0.0000
0.0000
0.0000
0.0000
0.0000
40.00
MIC-120-U
0.0000
0.0000
17.5400
0.0000
0.0000
0.0000
97.00
0.0000
0.0000
-17.5400
0.0000
0.0000
0.0000
97.00
17.7510
0.0000
0.0000
0.0000
0.0000
0.0000
40.00
Support No.
(Design load)
Designation
Forces[kN]
Moments[kNm]
MIC-C90-D-
0.0000
0.0000
17.7510
0.0000
0.0000
0.0000
MIC-C90-D-
0.0000
0.0000
17.7510
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
607
Contact:
Page:
7 of 14
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MIC-C90-D-2000
17.41
0.0
0.00
MI-120 6m
44.71
0.0
0.00
MIC-C90-D-2000
17.41
0.0
0.00
(Design load)
Forces[kN]
Moments[kNm]
Node No.
Beam No.
MIC-C90-D-
11.8530
MIC-120-U
0.0000
MIC-120-U
0.0000
0.3400
-11.7000
0.0000
0.0000
0.0000
65.00
MIC-C90-D-
11.8530
-0.3350
0.0000
0.0000
0.0000
-0.6500
47.00
Designation
Support No.
Utilization[%]
0.3350
0.0000
0.0000
0.0000
0.6500
47.00
-0.3400
11.7000
0.0000
0.0000
0.0000
65.00
(Design load)
Forces[kN]
Designation
Moments[kNm]
MIC-C90-D-
0.0000
0.3350
11.8530
-0.6500
0.0000
0.0000
MIC-C90-D-
0.0000
0.3350
11.8530
-0.6500
0.0000
0.0000
Designation
Stress
[%]
[]
[%]
MIC-C90-D-2000
17.41
0.0
0.00
MI-120 6m
44.62
0.0
0.00
MIC-C90-D-2000
17.41
0.0
0.00
Beam No.
Torsion
Torsion
(Design load)
Designation
Forces[kN]
X
MIC-C90-D-
11.8530
MIC-120-U
0.0000
MIC-120-U
MIC-C90-D-
Moments[kNm]
Utilization[%]
-0.3350
0.0000
0.0000
0.0000
-0.6500
47.00
0.3400
11.7000
0.0000
0.0000
0.0000
65.00
0.0000
-0.3400
-11.7000
0.0000
0.0000
0.0000
65.00
11.8530
0.3350
0.0000
0.0000
0.0000
0.6500
47.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
608
Contact:
Page:
8 of 14
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Support No.
09-Mar-15
Forces[kN]
Designation
Moments[kNm]
MIC-C90-D-
0.0000
-0.3350
11.8530
0.6500
0.0000
0.0000
MIC-C90-D-
0.0000
-0.3350
11.8530
0.6500
0.0000
0.0000
Designation
Stress
[%]
[]
[%]
MIC-C90-D-2000
9.00
0.0
0.00
MI-120 6m
44.01
0.0
0.00
MIC-C90-D-2000
9.00
0.0
0.00
Beam No.
Torsion
(Design load)
Torsion
Forces[kN]
Designation
MIC-C90-D-
Moments[kNm]
Utilization[%]
11.8530
0.1010
0.0000
0.0000
0.0000
0.1950
33.00
MIC-120-U
0.0000
-0.1000
11.7000
0.0000
0.0000
0.0000
65.00
MIC-120-U
0.0000
0.1000
-11.7000
0.0000
0.0000
0.0000
65.00
MIC-C90-D-
11.8530
-0.1010
0.0000
0.0000
0.0000
-0.1950
33.00
(Design load)
Support No.
Forces[kN]
Designation
Moments[kNm]
MIC-C90-D-
0.0000
0.1010
11.8530
-0.1950
0.0000
0.0000
MIC-C90-D-
0.0000
0.1010
11.8530
-0.1950
0.0000
0.0000
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MIC-C90-D-2000
9.00
0.0
0.00
MI-120 6m
43.91
0.0
0.00
MIC-C90-D-2000
9.00
0.0
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
609
Contact:
Page:
9 of 14
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Beam No.
Forces[kN]
Designation
MIC-C90-D-
11.8530
MIC-120-U
0.0000
MIC-120-U
MIC-C90-D-
Support No.
09-Mar-15
Moments[kNm]
Utilization[%]
-0.1010
0.0000
0.0000
0.0000
-0.1950
33.00
0.1000
11.7000
0.0000
0.0000
0.0000
65.00
0.0000
-0.1000
-11.7000
0.0000
0.0000
0.0000
65.00
11.8530
0.1010
0.0000
0.0000
0.0000
0.1950
33.00
(Design load)
Designation
Forces[kN]
Moments[kNm]
MIC-C90-D-
0.0000
-0.1010
11.8530
0.1950
0.0000
0.0000
MIC-C90-D-
0.0000
-0.1010
11.8530
0.1950
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
610
Contact:
Page:
10 of 14
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Stress:
Beam No. 1: MIC-C90-D-2000
Position
[m]
0.00
0.00
0.00
Actual
[kN/m]
37,180.000
790.000
37,180.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
17.40
0.64
17.41
[m]
0.35
0.00
0.35
Actual
[kN/m]
-138,530.000
-26,380.000
139,770.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
64.85
21.38
65.42
[m]
0.00
0.00
0.00
Actual
[kN/m]
37,180.000
-790.000
37,180.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
17.40
0.64
17.41
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
611
Contact:
Page:
11 of 14
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Displacement SLS1:
Beam No.
Value
Position [m]
Max. Displacement
1.94
Displacement [mm]
Utilization
u-X
u-Y
u-Z
[%]
0.0
0.0
0.1
1.12
Max. Displacement
0.35
0.0
0.0
0.4
10.57
Max. Displacement
1.94
0.0
0.0
0.1
1.12
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
612
Contact:
Page:
12 of 14
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
(Design load)
Support load:
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
0.0000
17.7510
0.0000
0.0000
0.0000
0.0000
0.0000
17.7510
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
0.3350
11.8530
-0.6500
0.0000
0.0000
0.0000
0.3350
11.8530
-0.6500
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
-0.3350
11.8530
0.6500
0.0000
0.0000
0.0000
-0.3350
11.8530
0.6500
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
0.1010
11.8530
-0.1950
0.0000
0.0000
0.0000
0.1010
11.8530
-0.1950
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
613
Contact:
Page:
13 of 14
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
-0.1010
11.8530
0.1950
0.0000
0.0000
0.0000
-0.1010
11.8530
0.1950
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
614
Contact:
Page:
14 of 14
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
615
Contact:
Page:
1 of 14
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
616
Contact:
Page:
2 of 14
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Calculation factors:
Load type:
Seismic
LC1: g
LC2: q
LC3: Ex
Earthquake in X-direction
LC4: Ey
Earthquake in Y-direction
1.1
1.5
1.35
Load combinations:
ULS1 = 1.35*LC1+1.5*LC2
SLS1 = 1*LC1+1*LC2
ULS2 = 1*LC1+1*LC2+1*LC3
ULS3 = 1*LC1+1*LC2-1*LC3
ULS4 = 1*LC1+1*LC2+0.3*LC3
ULS5 = 1*LC1+1*LC2-0.3*LC3
Maximum beam allowable deflection:
200
150
1.5
Local
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
617
Contact:
Page:
3 of 14
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Parts List:
Channels
Description
Item
Pos
Qty
Girder MI-120 6m
304801
7.2
0.57
Bracket MIC-C90-D-2000
267793
49.5
2.00
Item
Weight [kg]
Node No.
304804
5.6
2,3
Beam No.
Connections
Pos
Qty
Description
Connector MIC-120-U
Fixations
Pos
Qty
Description
Safety stud anchor HST M16X140/25
Item
Fixation text
371593
Accessories
Pos
Qty
Description
Girder end cap MIA-EC90
Item
432077
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
0.0
0.00
618
Contact:
Page:
4 of 14
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Static model:
Node
Hinged axis
Connection
No.
0.0000
0.0000
0.0000
0.0000
0.0000
1.9400
Y,Z
MIC-120-U
0.7000
0.0000
1.9400
Y,Z
MIC-120-U
0.7000
0.0000
0.0000
Building material
MIC-C90-D-2000
Concrete
MIC-C90-D-2000
Concrete
Beams
Beam
Channel
No.
Length
Rotation
Iy
Iz
[m]
[]
[cm]
[cm]
[cm]
[kN/m]
MIC-C90-D-2000
1.94
1,003
115
115
210,000,000.
MI-120 6m
0.70
1,376
266
174
210,000,000.
MIC-C90-D-2000
1.94
180
1,003
115
115
210,000,000.
No.
Position
Forces [kN]
Moments [kNm]
Forces [kN]
[m]
Ex
Ey
0.35
0.0000
0.0000
23.3250
0.0000
0.0000
0.0000
0.6700
0.0000
Load description
No.
Type
Description
Size [mm]
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
Span [m]
619
Contact:
Page:
5 of 14
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
No.
Date:
Type
Description
Size [mm]
Span [m]
09-Mar-15
Custom load
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
620
Contact:
Page:
6 of 14
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Calculation summary
1 Beams
(1) Connections
[1] Supports
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MIC-C90-D-2000
8.29
0.0
0.00
MI-120 6m
65.42
0.0
0.00
MIC-C90-D-2000
8.29
0.0
0.00
(Design load)
Beam No.
MIC-120-U
MIC-C90-D-
Forces[kN]
Designation
Moments[kNm]
Utilization[%]
MIC-C90-D-
17.7510
0.0000
0.0000
0.0000
0.0000
0.0000
40.00
MIC-120-U
0.0000
0.0000
17.5400
0.0000
0.0000
0.0000
97.00
0.0000
0.0000
-17.5400
0.0000
0.0000
0.0000
97.00
17.7510
0.0000
0.0000
0.0000
0.0000
0.0000
40.00
Support No.
(Design load)
Designation
Forces[kN]
Moments[kNm]
MIC-C90-D-
0.0000
0.0000
17.7510
0.0000
0.0000
0.0000
MIC-C90-D-
0.0000
0.0000
17.7510
0.0000
0.0000
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
621
Contact:
Page:
7 of 14
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Designation
Stress
[%]
[]
[%]
MIC-C90-D-2000
17.41
0.0
0.00
MI-120 6m
43.76
0.0
0.00
MIC-C90-D-2000
17.41
0.0
0.00
Beam No.
Forces[kN]
Designation
MIC-C90-D-
11.8530
MIC-120-U
0.3400
MIC-120-U
MIC-C90-D-
Support No.
Moments[kNm]
Utilization[%]
0.0000
-0.3350
0.0000
0.6500
0.0000
47.00
0.0000
11.7000
0.0000
0.0000
0.0000
70.00
-0.3300
0.0000
-11.7000
0.0000
0.0000
0.0000
65.00
11.8530
0.0000
0.3350
0.0000
-0.6500
0.0000
47.00
(Design load)
Torsion
(Design load)
Torsion
Forces[kN]
Designation
Moments[kNm]
MIC-C90-D-
0.3350
0.0000
11.8530
0.0000
0.6500
0.0000
MIC-C90-D-
0.3350
0.0000
11.8530
0.0000
0.6500
0.0000
Designation
Stress
[%]
[]
[%]
MIC-C90-D-2000
17.41
0.0
0.00
MI-120 6m
43.76
0.0
0.00
MIC-C90-D-2000
17.41
0.0
0.00
Torsion
Torsion
(Design load)
Node No.
Beam No.
MIC-120-U
MIC-C90-D-
Designation
Forces[kN]
X
MIC-C90-D-
11.8530
MIC-120-U
-0.3300
Moments[kNm]
Utilization[%]
0.0000
0.3350
0.0000
-0.6500
0.0000
47.00
0.0000
11.7000
0.0000
0.0000
0.0000
65.00
0.3400
0.0000
-11.7000
0.0000
0.0000
0.0000
70.00
11.8530
0.0000
-0.3350
0.0000
0.6500
0.0000
47.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
622
Contact:
Page:
8 of 14
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Support No.
09-Mar-15
Forces[kN]
Designation
Moments[kNm]
MIC-C90-D-
-0.3350
0.0000
11.8530
0.0000
-0.6500
0.0000
MIC-C90-D-
-0.3350
0.0000
11.8530
0.0000
-0.6500
0.0000
Designation
Stress
[%]
[]
[%]
MIC-C90-D-2000
9.00
0.0
0.00
MI-120 6m
43.68
0.0
0.00
MIC-C90-D-2000
9.00
0.0
0.00
Beam No.
Torsion
(Design load)
Torsion
Forces[kN]
Designation
MIC-C90-D-
Moments[kNm]
11.8530
0.0000
-0.1010
0.0000
0.1950
0.0000
Utilization[%]
33.00
MIC-120-U
0.1000
0.0000
11.7000
0.0000
0.0000
0.0000
65.00
MIC-120-U
-0.1000
0.0000
-11.7000
0.0000
0.0000
0.0000
65.00
MIC-C90-D-
11.8530
0.0000
0.1000
0.0000
-0.1950
0.0000
33.00
(Design load)
Support No.
Forces[kN]
Designation
Moments[kNm]
MIC-C90-D-
0.1010
0.0000
11.8530
0.0000
0.1950
0.0000
MIC-C90-D-
0.1000
0.0000
11.8530
0.0000
0.1950
0.0000
Designation
Stress
Torsion
Torsion
[%]
[]
[%]
MIC-C90-D-2000
9.00
0.0
0.00
MI-120 6m
43.68
0.0
0.00
MIC-C90-D-2000
9.00
0.0
0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
623
Contact:
Page:
9 of 14
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
(Design load)
Beam No.
MIC-120-U
MIC-C90-D-
Forces[kN]
Designation
MIC-C90-D-
11.8530
MIC-120-U
-0.1000
Support No.
09-Mar-15
Moments[kNm]
Utilization[%]
0.0000
0.1000
0.0000
-0.1950
0.0000
33.00
0.0000
11.7000
0.0000
0.0000
0.0000
65.00
0.1000
0.0000
-11.7000
0.0000
0.0000
0.0000
65.00
11.8530
0.0000
-0.1010
0.0000
0.1950
0.0000
33.00
(Design load)
Designation
Forces[kN]
Moments[kNm]
MIC-C90-D-
-0.1000
0.0000
11.8530
0.0000
-0.1950
0.0000
MIC-C90-D-
-0.1010
0.0000
11.8530
0.0000
-0.1950
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
624
Contact:
Page:
10 of 14
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Stress:
Beam No. 1: MIC-C90-D-2000
Position
[m]
0.00
0.00
0.00
Actual
[kN/m]
37,180.000
790.000
37,180.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
17.40
0.64
17.41
[m]
0.35
0.00
0.35
Actual
[kN/m]
-138,530.000
-26,380.000
139,770.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
64.85
21.38
65.42
[m]
0.00
0.00
0.00
Actual
[kN/m]
37,180.000
790.000
37,180.000
Limit
[kN/m]
213,640.000
123,340.000
213,640.000
Utilization
[%]
17.40
0.64
17.41
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
625
Contact:
Page:
11 of 14
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Displacement SLS1:
Beam No.
Value
Position [m]
Max. Displacement
1.94
Displacement [mm]
Utilization
u-X
u-Y
u-Z
[%]
0.0
0.0
0.1
1.12
Max. Displacement
0.35
0.0
0.0
0.4
10.57
Max. Displacement
1.94
0.0
0.0
0.1
1.12
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
626
Contact:
Page:
12 of 14
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
(Design load)
Support load:
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.0000
0.0000
17.7510
0.0000
0.0000
0.0000
0.0000
0.0000
17.7510
0.0000
0.0000
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.3350
0.0000
11.8530
0.0000
0.6500
0.0000
0.3350
0.0000
11.8530
0.0000
0.6500
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
-0.3350
0.0000
11.8530
0.0000
-0.6500
0.0000
-0.3350
0.0000
11.8530
0.0000
-0.6500
0.0000
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
0.1010
0.0000
11.8530
0.0000
0.1950
0.0000
0.1000
0.0000
11.8530
0.0000
0.1950
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
627
Contact:
Page:
13 of 14
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Forces [kN]
Moments [kNm]
No.
F-X
F-Y
F-Z
M-X
M-Y
M-Z
-0.1000
0.0000
11.8530
0.0000
-0.1950
0.0000
-0.1010
0.0000
11.8530
0.0000
-0.1950
0.0000
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
628
Contact:
Page:
14 of 14
Project:
Sec. Bldg
CHW 450 mm dia | Supply
Address:
Subproject:
Phone Mobile/Office:
Hilti TB/VB:
E-Mail:
Date:
09-Mar-15
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary.
Copyright (c) Hilti AG 2010, FL-9494 Schaan
IS-HN-D1278-2015
629
Anchor studies
www.hilti.sa
sa.tso@hilti.com
IS-HN-D1278-2015
630
Base material
Thickness
= 200mm
Factor of safety = 5
(Already Calculated in Channel Design)
U
www.hilti.sa
631
www.hilti-me.com
Company:
Specifier:
Address:
Phone I Fax:
E-Mail:
Page:
Project:
Sub-Project I Pos. No.:
Date:
1
10-Mar-15
Specifier's comments:
1 Input data
Anchor type and diameter:
HST M16
Material:
Evaluation Service Report:
ETA 98/0001
Issued I Valid:
08-May-13 | 20-Feb-18
Proof:
Stand-off installation:
eb = 0 mm (no stand-off); t = 15 mm
Anchor plate:
Profile:
Rectangular hollow; (L x W x T) = 90 mm x 90 mm x 4 mm
Base material:
Reinforcement:
no reinforcement or reinforcement spacing >= 150 mm (any ) or >= 100 mm ( <= 10 mm)
no longitudinal edge reinforcement
Input data and results must be checked for agreement with the existing conditions and for plausibility!
PROFIS Anchor ( c ) 2003-2009 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
IS-HN-D1278-2015
632
www.hilti-me.com
Company:
Specifier:
Address:
Phone I Fax:
E-Mail:
Case
1
Description
Page:
Project:
Sub-Project I Pos. No.:
Date:
10-Mar-15
Seismic
no
Fire
no
no
no
39
Compression
Shear force y
0.123
0.123
0.123
0.123
Tension
Capacity [kN]
50.667
Utilization bN [%]
9
Status
OK
Pullout Strength*
4.342
14.606
30
OK
9.195
24.197
39
OK
Splitting failure**
9.195
28.078
33
OK
Steel Strength*
gM,s
1.500
NRd,s [kN]
50.667
NSd [kN]
4.342
yc
1.095
gM,p
1.500
NRd,p [kN]
14.606
NSd [kN]
4.342
A0c,N [mm2]
60516
ccr,N [mm]
123
scr,N [mm]
246
ec1,N [mm]
0
yec1,N
1.000
ec2,N [mm]
69
yec2,N
0.640
N0Rk,c [kN]
29.283
gM,c
1.500
NRd,c [kN]
24.197
NSd [kN]
9.195
Ac,N [mm2]
130321
A0c,N [mm2]
60516
ccr,sp [mm]
123
scr,sp [mm]
246
yh,sp
1.160
ec1,N [mm]
0
yec1,N
1.000
ec2,N [mm]
69
yec2,N
0.640
ys,N
0.900
N0Rk,c [kN]
29.283
gM,sp
1.500
NRd,sp [kN]
28.078
NSd [kN]
9.195
ys,N
0.900
yre,N
1.000
k1
7.200
yre,N
1.000
k1
7.200
Input data and results must be checked for agreement with the existing conditions and for plausibility!
PROFIS Anchor ( c ) 2003-2009 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
IS-HN-D1278-2015
633
www.hilti-me.com
Company:
Specifier:
Address:
Phone I Fax:
E-Mail:
Page:
Project:
Sub-Project I Pos. No.:
Date:
3
10-Mar-15
Capacity [kN]
44.000
Utilization bV [%]
1
Status
OK
N/A
N/A
N/A
N/A
Pryout Strength**
0.490
94.591
OK
0.245
27.595
OK
gM,s
1.250
VRd,s [kN]
44.000
VSd [kN]
0.123
Ac,N [mm2]
130321
A0c,N [mm2]
60516
ccr,N [mm]
123
scr,N [mm]
246
k-factor
2.500
ec1,V [mm]
0
yec1,N
1.000
ec2,V [mm]
0
yec2,N
1.000
ys,N
0.900
N0Rk,c [kN]
29.283
gM,c,p
1.500
VRd,c1 [kN]
94.591
VSd [kN]
0.490
a
0.100
b
0.072
yec,V
1.000
yre,N
1.000
dnom [mm]
16.0
k1
1.700
c1 [mm]
82
Ac,V [mm2]
44403
A0c,V [mm2]
30258
ys,V
0.900
yh,V
1.000
ya,V
2.500
ec,V [mm]
0
V0Rk,c [kN]
12.536
gM,c
1.500
VRd,c [kN]
27.595
VSd [kN]
0.245
yre,V
1.000
bV
0.009
a
1.500
Status
OK
bN + bV 1
3.216 [kN]
dN
0.169 [mm]
VSk
0.091 [kN]
dV
0.012 [mm]
dNV
0.170 [mm]
dN
0.406 [mm]
dV
0.017 [mm]
dNV
0.407 [mm]
3.216 [kN]
VSk
0.091 [kN]
Comments: Tension displacements are valid with half of the required installation torque moment for uncracked concrete! Shear displacements
are valid without friction between the concrete and the anchor plate! The gap due to the drilled hole and clearance hole tolerances are not
included in this calculation!
The acceptable anchor displacements depend on the fastened construction and must be defined by the designer!
Input data and results must be checked for agreement with the existing conditions and for plausibility!
PROFIS Anchor ( c ) 2003-2009 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
IS-HN-D1278-2015
634
www.hilti-me.com
Company:
Specifier:
Address:
Phone I Fax:
E-Mail:
Page:
Project:
Sub-Project I Pos. No.:
Date:
4
10-Mar-15
7 Warnings
Load re-distributions on the anchors due to elastic deformations of the anchor plate are not considered. The anchor plate is assumed to be
sufficiently stiff, in order not to be deformed when subjected to the loading!
Input data and results must be checked for agreement with the
existing conditions and for plausibility!
Checking the transfer of loads into the base material is required in accordance with ETAG 001, Annex C(2010)Section 7! The software
considers that the grout is installed under the anchor plate without creating air voids and before application of the loads.
The design is only valid if the clearance hole in the fixture is not larger than the value given in Table 4.1 of ETAG 001, Annex C! For larger
diameters of the clearance hole see Chapter 1.1. of ETAG 001, Annex C!
The accessory list in this report is for the information of the user only. In any case, the instructions for use provided with the product have to
be followed to ensure a proper installation.
Input data and results must be checked for agreement with the existing conditions and for plausibility!
PROFIS Anchor ( c ) 2003-2009 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
IS-HN-D1278-2015
635
www.hilti-me.com
Company:
Specifier:
Address:
Phone I Fax:
E-Mail:
Page:
Project:
Sub-Project I Pos. No.:
Date:
5
10-Mar-15
8 Installation data
Anchor plate, steel: Anchor type and diameter: HST M16
Profile: Rectangular hollow; 90 x 90 x 4 mm
Installation torque: 0.110 kNm
Hole diameter in the fixture: df = 18 mm
Hole diameter in the base material: 16 mm
Plate thickness (input): 15 mm
Hole depth in the base material: 115 mm
Recommended plate thickness: not calculated
Minimum thickness of the base material: 160 mm
Cleaning: Manual cleaning of the drilled hole according to instructions for use is required.
Cleaning
Manual blow-out pump
Setting
Torque wrench
Hammer
y
115
37
115
156
115
115
2
37
37
156
37
x
-78
78
-78
78
y
-78
-78
78
78
c-x
82
238
82
238
c+x
-
c-y
82
82
238
238
c+y
-
Input data and results must be checked for agreement with the existing conditions and for plausibility!
PROFIS Anchor ( c ) 2003-2009 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
IS-HN-D1278-2015
636
www.hilti-me.com
Company:
Specifier:
Address:
Phone I Fax:
E-Mail:
Page:
Project:
Sub-Project I Pos. No.:
Date:
6
10-Mar-15
Input data and results must be checked for agreement with the existing conditions and for plausibility!
PROFIS Anchor ( c ) 2003-2009 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
IS-HN-D1278-2015
637
(CHW 150 mm dia | Supply and Return | 1.5 m suspension | Seismic Support L)
U
Base Material
Cracked Concrete, C25/30, f cc = 30.00 MPA
R
Factor of Safety = 5
(Already Calculated in Channel Design)
U
www.hilti.sa
638
www.hilti-me.com
Company:
Specifier:
Address:
Phone I Fax:
E-Mail:
Page:
Project:
Sub-Project I Pos. No.:
Date:
1
10-Mar-15
Specifier's comments:
1 Input data
Anchor type and diameter:
HST M12
Material:
Evaluation Service Report:
ETA 98/0001
Issued I Valid:
08-May-13 | 20-Feb-18
Proof:
Stand-off installation:
eb = 0 mm (no stand-off); t = 8 mm
Anchor plate:
Profile:
Base material:
Reinforcement:
no reinforcement or reinforcement spacing >= 150 mm (any ) or >= 100 mm ( <= 10 mm)
no longitudinal edge reinforcement
Input data and results must be checked for agreement with the existing conditions and for plausibility!
PROFIS Anchor ( c ) 2003-2009 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
IS-HN-D1278-2015
639
www.hilti-me.com
Company:
Specifier:
Address:
Phone I Fax:
E-Mail:
Page:
Project:
Sub-Project I Pos. No.:
Date:
10-Mar-15
y
Shear force y
0.426
0.426
Tension
Compression
Capacity [kN]
30.000
Utilization bN [%]
11
Status
OK
Pullout Strength*
3.083
12.394
25
OK
6.165
29.014
22
OK
6.165
36.803
17
OK
Steel Strength*
Splitting failure**
* anchor having the highest loading
gM,s
1.500
NRd,s [kN]
30.000
NSd [kN]
3.083
yc
1.549
gM,p
1.500
NRd,p [kN]
12.394
NSd [kN]
3.083
A0c,N [mm2]
44100
ccr,N [mm]
105
scr,N [mm]
210
ec1,N [mm]
0
yec1,N
1.000
ec2,N [mm]
0
yec2,N
1.000
N0Rk,c [kN]
32.663
gM,c
1.500
NRd,c [kN]
29.014
NSd [kN]
6.165
Ac,N [mm2]
67988
A0c,N [mm2]
44100
ccr,sp [mm]
105
scr,sp [mm]
210
yh,sp
1.268
ec1,N [mm]
0
yec1,N
1.000
ec2,N [mm]
0
yec2,N
1.000
ys,N
0.864
N0Rk,c [kN]
32.663
gM,sp
1.500
NRd,sp [kN]
36.803
NSd [kN]
6.165
ys,N
0.864
yre,N
1.000
k1
7.200
yre,N
1.000
k1
7.200
Input data and results must be checked for agreement with the existing conditions and for plausibility!
PROFIS Anchor ( c ) 2003-2009 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
IS-HN-D1278-2015
640
www.hilti-me.com
Company:
Specifier:
Address:
Phone I Fax:
E-Mail:
Page:
Project:
Sub-Project I Pos. No.:
Date:
3
10-Mar-15
Capacity [kN]
28.000
Utilization bV [%]
2
Status
OK
N/A
N/A
N/A
N/A
Pryout Strength**
0.851
63.831
OK
0.426
16.190
OK
gM,s
1.250
VRd,s [kN]
28.000
VSd [kN]
0.426
Ac,N [mm2]
67988
A0c,N [mm2]
44100
ccr,N [mm]
105
scr,N [mm]
210
k-factor
2.200
ec1,V [mm]
0
yec1,N
1.000
ec2,V [mm]
0
yec2,N
1.000
ys,N
0.864
N0Rk,c [kN]
32.663
gM,c,p
1.500
VRd,c1 [kN]
63.831
VSd [kN]
0.851
a
0.110
b
0.073
yec,V
1.000
yre,N
1.000
dnom [mm]
12.0
k1
1.700
c1 [mm]
58
Ac,V [mm2]
14339
A0c,V [mm2]
14878
ys,V
0.978
yh,V
1.000
ya,V
2.500
ec,V [mm]
0
V0Rk,c [kN]
10.303
gM,c
1.500
VRd,c [kN]
16.190
VSd [kN]
0.426
yre,V
1.000
bV
0.026
a
1.500
Status
OK
bN + bV 1
2.283 [kN]
dN
0.040 [mm]
VSk
0.315 [kN]
dV
0.058 [mm]
dNV
0.071 [mm]
dN
0.481 [mm]
dV
0.087 [mm]
dNV
0.488 [mm]
2.283 [kN]
VSk
0.315 [kN]
Comments: Tension displacements are valid with half of the required installation torque moment for uncracked concrete! Shear displacements
are valid without friction between the concrete and the anchor plate! The gap due to the drilled hole and clearance hole tolerances are not
included in this calculation!
The acceptable anchor displacements depend on the fastened construction and must be defined by the designer!
Input data and results must be checked for agreement with the existing conditions and for plausibility!
PROFIS Anchor ( c ) 2003-2009 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
IS-HN-D1278-2015
641
www.hilti-me.com
Company:
Specifier:
Address:
Phone I Fax:
E-Mail:
Page:
Project:
Sub-Project I Pos. No.:
Date:
4
10-Mar-15
7 Warnings
Load re-distributions on the anchors due to elastic deformations of the anchor plate are not considered. The anchor plate is assumed to be
sufficiently stiff, in order not to be deformed when subjected to the loading!
Input data and results must be checked for agreement with the
existing conditions and for plausibility!
Checking the transfer of loads into the base material is required in accordance with ETAG 001, Annex C(2010)Section 7! The software
considers that the grout is installed under the anchor plate without creating air voids and before application of the loads.
The design is only valid if the clearance hole in the fixture is not larger than the value given in Table 4.1 of ETAG 001, Annex C! For larger
diameters of the clearance hole see Chapter 1.1. of ETAG 001, Annex C!
The accessory list in this report is for the information of the user only. In any case, the instructions for use provided with the product have to
be followed to ensure a proper installation.
Input data and results must be checked for agreement with the existing conditions and for plausibility!
PROFIS Anchor ( c ) 2003-2009 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
IS-HN-D1278-2015
642
www.hilti-me.com
Company:
Specifier:
Address:
Phone I Fax:
E-Mail:
Page:
Project:
Sub-Project I Pos. No.:
Date:
5
10-Mar-15
8 Installation data
Anchor plate, steel: Anchor type and diameter: HST M12
Profile: Rectangular hollow; 45 x 125 x 3 mm
Installation torque: 0.060 kNm
Hole diameter in the fixture: df = 14 mm
Hole diameter in the base material: 12 mm
Plate thickness (input): 8 mm
Hole depth in the base material: 95 mm
Recommended plate thickness: not calculated
Minimum thickness of the base material: 140 mm
Cleaning: Manual cleaning of the drilled hole according to instructions for use is required.
Cleaning
Manual blow-out pump
Setting
Torque wrench
Hammer
50
50
50
125
50
125
23
205
23
x
-103
103
y
0
0
c-x
58
263
c+x
-
c-y
80
80
c+y
-
Input data and results must be checked for agreement with the existing conditions and for plausibility!
PROFIS Anchor ( c ) 2003-2009 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
IS-HN-D1278-2015
643
www.hilti-me.com
Company:
Specifier:
Address:
Phone I Fax:
E-Mail:
Page:
Project:
Sub-Project I Pos. No.:
Date:
6
10-Mar-15
Input data and results must be checked for agreement with the existing conditions and for plausibility!
PROFIS Anchor ( c ) 2003-2009 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
IS-HN-D1278-2015
644
Base Material
Cracked Concrete, C25/30, f cc = 30.00 MPA
R
Factor of Safety = 5
(Already Calculated in Channel Design)
U
www.hilti.sa
645
www.hilti-me.com
Company:
Specifier:
Address:
Phone I Fax:
E-Mail:
Page:
Project:
Sub-Project I Pos. No.:
Date:
1
10-Mar-15
1 Input data
Anchor type and diameter:
HST M12
Material:
Evaluation Service Report:
ETA 98/0001
Issued I Valid:
08-May-13 | 20-Feb-18
Proof:
Stand-off installation:
eb = 0 mm (no stand-off); t = 8 mm
Anchor plate:
Profile:
Rectangular hollow; (L x W x T) = 45 mm x 85 mm x 3 mm
Base material:
Reinforcement:
no reinforcement or reinforcement spacing >= 150 mm (any ) or >= 100 mm ( <= 10 mm)
no longitudinal edge reinforcement
Input data and results must be checked for agreement with the existing conditions and for plausibility!
PROFIS Anchor ( c ) 2003-2009 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
IS-HN-D1278-2015
646
www.hilti-me.com
Company:
Specifier:
Address:
Phone I Fax:
E-Mail:
Page:
Project:
Sub-Project I Pos. No.:
Date:
10-Mar-15
Case
1
Description
2
Seismic
no
Fire
no
Imported 1
no
no
31
y
Shear force y
-0.008
-0.008
1
Tension
2
Compression
Capacity [kN]
30.000
Utilization bN [%]
9
Status
OK
Pullout Strength*
2.640
8.764
31
OK
2.727
9.729
29
OK
Splitting failure**
2.727
12.341
23
OK
Steel Strength*
gM,s
1.500
NRd,s [kN]
30.000
NSd [kN]
2.640
yc
1.095
gM,p
1.500
NRd,p [kN]
8.764
NSd [kN]
2.640
A0c,N [mm2]
44100
ccr,N [mm]
105
scr,N [mm]
210
ec1,N [mm]
70
yec1,N
0.599
ec2,N [mm]
0
yec2,N
1.000
N0Rk,c [kN]
23.096
gM,c
1.500
NRd,c [kN]
9.729
NSd [kN]
2.727
Ac,N [mm2]
54250
A0c,N [mm2]
44100
ccr,sp [mm]
105
scr,sp [mm]
210
yh,sp
1.268
ec1,N [mm]
70
yec1,N
0.599
ec2,N [mm]
0
yec2,N
1.000
ys,N
0.857
N0Rk,c [kN]
23.096
gM,sp
1.500
NRd,sp [kN]
12.341
NSd [kN]
2.727
ys,N
0.857
yre,N
1.000
k1
7.200
yre,N
1.000
k1
7.200
Input data and results must be checked for agreement with the existing conditions and for plausibility!
PROFIS Anchor ( c ) 2003-2009 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
IS-HN-D1278-2015
647
www.hilti-me.com
Company:
Specifier:
Address:
Phone I Fax:
E-Mail:
Page:
Project:
Sub-Project I Pos. No.:
Date:
3
10-Mar-15
Capacity [kN]
28.000
Utilization bV [%]
2
Status
OK
N/A
N/A
N/A
N/A
Pryout Strength**
0.395
35.718
OK
0.395
19.799
OK
gM,s
1.250
VRd,s [kN]
28.000
VSd [kN]
0.395
Ac,N [mm2]
54250
A0c,N [mm2]
44100
ccr,N [mm]
105
scr,N [mm]
210
k-factor
2.200
ec1,V [mm]
0
yec1,N
1.000
ec2,V [mm]
0
yec2,N
1.000
ys,N
0.857
N0Rk,c [kN]
23.096
gM,c,p
1.500
VRd,c1 [kN]
35.718
VSd [kN]
0.395
a
0.100
b
0.070
yec,V
1.000
yre,N
1.000
dnom [mm]
12.0
k1
1.700
c1 [mm]
70
Ac,V [mm2]
32550
A0c,V [mm2]
22050
ys,V
0.857
yh,V
1.000
ya,V
2.491
ec,V [mm]
0
V0Rk,c [kN]
9.424
gM,c
1.500
VRd,c [kN]
19.799
VSd [kN]
0.395
yre,V
1.000
bV
0.020
a
1.500
Status
OK
bN + bV 1
0.064 [kN]
dN
0.001 [mm]
VSk
0.293 [kN]
dV
0.054 [mm]
dNV
0.054 [mm]
dN
0.014 [mm]
dV
0.080 [mm]
dNV
0.082 [mm]
0.064 [kN]
VSk
0.293 [kN]
Comments: Tension displacements are valid with half of the required installation torque moment for uncracked concrete! Shear displacements
are valid without friction between the concrete and the anchor plate! The gap due to the drilled hole and clearance hole tolerances are not
included in this calculation!
The acceptable anchor displacements depend on the fastened construction and must be defined by the designer!
Input data and results must be checked for agreement with the existing conditions and for plausibility!
PROFIS Anchor ( c ) 2003-2009 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
IS-HN-D1278-2015
648
www.hilti-me.com
Company:
Specifier:
Address:
Phone I Fax:
E-Mail:
Page:
Project:
Sub-Project I Pos. No.:
Date:
4
10-Mar-15
7 Warnings
Load re-distributions on the anchors due to elastic deformations of the anchor plate are not considered. The anchor plate is assumed to be
sufficiently stiff, in order not to be deformed when subjected to the loading!
Input data and results must be checked for agreement with the
existing conditions and for plausibility!
Checking the transfer of loads into the base material is required in accordance with ETAG 001, Annex C(2010)Section 7! The software
considers that the grout is installed under the anchor plate without creating air voids and before application of the loads.
The design is only valid if the clearance hole in the fixture is not larger than the value given in Table 4.1 of ETAG 001, Annex C! For larger
diameters of the clearance hole see Chapter 1.1. of ETAG 001, Annex C!
The accessory list in this report is for the information of the user only. In any case, the instructions for use provided with the product have to
be followed to ensure a proper installation.
Input data and results must be checked for agreement with the existing conditions and for plausibility!
PROFIS Anchor ( c ) 2003-2009 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
IS-HN-D1278-2015
649
www.hilti-me.com
Company:
Specifier:
Address:
Phone I Fax:
E-Mail:
Page:
Project:
Sub-Project I Pos. No.:
Date:
5
10-Mar-15
8 Installation data
Anchor plate, steel: Anchor type and diameter: HST M12
Profile: Rectangular hollow; 45 x 85 x 3 mm
Installation torque: 0.060 kNm
Hole diameter in the fixture: df = 14 mm
Hole diameter in the base material: 12 mm
Plate thickness (input): 8 mm
Hole depth in the base material: 95 mm
Recommended plate thickness: not calculated
Minimum thickness of the base material: 140 mm
Cleaning: Manual cleaning of the drilled hole according to instructions for use is required.
Cleaning
Manual blow-out pump
Setting
Torque wrench
Hammer
50
50
50
100
50
100
25
150
25
x
-75
75
y
0
0
c-x
55
205
c+x
-
c-y
70
70
c+y
-
Input data and results must be checked for agreement with the existing conditions and for plausibility!
PROFIS Anchor ( c ) 2003-2009 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
IS-HN-D1278-2015
650
www.hilti-me.com
Company:
Specifier:
Address:
Phone I Fax:
E-Mail:
Page:
Project:
Sub-Project I Pos. No.:
Date:
6
10-Mar-15
Input data and results must be checked for agreement with the existing conditions and for plausibility!
PROFIS Anchor ( c ) 2003-2009 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
IS-HN-D1278-2015
651
Base Material
Cracked Concrete wall, C25/30, f cc = 30.00 MPA
R
Factor of Safety = 5
(Already Calculated in Channel Design)
U
www.hilti.sa
652
www.hilti-me.com
Company:
Specifier:
Address:
Phone I Fax:
E-Mail:
Page:
Project:
Sub-Project I Pos. No.:
Date:
1
MQP-21-72
10-Mar-15
Specifier's comments:
1 Input data
Anchor type and diameter:
HST M12
Material:
Evaluation Service Report:
ETA 98/0001
Issued I Valid:
08-May-13 | 20-Feb-18
Proof:
Stand-off installation:
eb = 0 mm (no stand-off); t = 6 mm
Anchor plate:
Profile:
U profile; (L x W x T x FT) = 50 mm x 80 mm x 4 mm x 5 mm
Base material:
Reinforcement:
no reinforcement or reinforcement spacing >= 150 mm (any ) or >= 100 mm ( <= 10 mm)
no longitudinal edge reinforcement
Input data and results must be checked for agreement with the existing conditions and for plausibility!
PROFIS Anchor ( c ) 2003-2009 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
IS-HN-D1278-2015
653
www.hilti-me.com
Company:
Specifier:
Address:
Phone I Fax:
E-Mail:
Page:
Project:
Sub-Project I Pos. No.:
Date:
MQP-21-72
10-Mar-15
y
Shear force y
0.091
0.091
Tension
Compression
Steel Strength*
Capacity [kN]
30.000
Utilization bN [%]
4
Status
OK
Pullout Strength*
1.051
8.764
12
OK
2.103
17.167
13
OK
2.103
21.775
10
OK
Splitting failure**
* anchor having the highest loading
gM,s
1.500
NRd,s [kN]
30.000
NSd [kN]
1.051
yc
1.095
gM,p
1.500
NRd,p [kN]
8.764
NSd [kN]
1.051
A0c,N [mm2]
44100
ccr,N [mm]
105
scr,N [mm]
210
ec1,N [mm]
0
yec1,N
1.000
ec2,N [mm]
0
yec2,N
1.000
N0Rk,c [kN]
23.096
gM,c
1.500
NRd,c [kN]
17.167
NSd [kN]
2.103
Ac,N [mm2]
55963
A0c,N [mm2]
44100
ccr,sp [mm]
105
scr,sp [mm]
210
yh,sp
1.268
ec1,N [mm]
0
yec1,N
1.000
ec2,N [mm]
0
yec2,N
1.000
ys,N
0.879
N0Rk,c [kN]
23.096
gM,sp
1.500
NRd,sp [kN]
21.775
NSd [kN]
2.103
ys,N
0.879
yre,N
1.000
k1
7.200
yre,N
1.000
k1
7.200
Input data and results must be checked for agreement with the existing conditions and for plausibility!
PROFIS Anchor ( c ) 2003-2009 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
IS-HN-D1278-2015
654
www.hilti-me.com
Company:
Specifier:
Address:
Phone I Fax:
E-Mail:
Page:
Project:
Sub-Project I Pos. No.:
Date:
3
MQP-21-72
10-Mar-15
Capacity [kN]
28.000
Utilization bV [%]
1
Status
OK
N/A
N/A
N/A
N/A
Pryout Strength**
0.182
37.767
OK
0.091
11.993
OK
gM,s
1.250
VRd,s [kN]
28.000
VSd [kN]
0.091
Ac,N [mm2]
55963
A0c,N [mm2]
44100
ccr,N [mm]
105
scr,N [mm]
210
k-factor
2.200
ec1,V [mm]
0
yec1,N
1.000
ec2,V [mm]
0
yec2,N
1.000
ys,N
0.879
N0Rk,c [kN]
23.096
gM,c,p
1.500
VRd,c1 [kN]
37.767
VSd [kN]
0.182
a
0.106
b
0.072
yec,V
1.000
yre,N
1.000
dnom [mm]
12.0
k1
1.700
c1 [mm]
63
Ac,V [mm2]
16289
A0c,V [mm2]
17578
ys,V
0.956
yh,V
1.000
ya,V
2.500
ec,V [mm]
0
V0Rk,c [kN]
8.122
gM,c
1.500
VRd,c [kN]
11.993
VSd [kN]
0.091
yre,V
1.000
bV
0.008
a
1.500
Status
OK
bN + bV 1
0.779 [kN]
dN
0.014 [mm]
VSk
0.067 [kN]
dV
0.012 [mm]
dNV
0.018 [mm]
dN
0.164 [mm]
dV
0.019 [mm]
dNV
0.165 [mm]
0.779 [kN]
VSk
0.067 [kN]
Comments: Tension displacements are valid with half of the required installation torque moment for uncracked concrete! Shear displacements
are valid without friction between the concrete and the anchor plate! The gap due to the drilled hole and clearance hole tolerances are not
included in this calculation!
The acceptable anchor displacements depend on the fastened construction and must be defined by the designer!
Input data and results must be checked for agreement with the existing conditions and for plausibility!
PROFIS Anchor ( c ) 2003-2009 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
IS-HN-D1278-2015
655
www.hilti-me.com
Company:
Specifier:
Address:
Phone I Fax:
E-Mail:
Page:
Project:
Sub-Project I Pos. No.:
Date:
4
MQP-21-72
10-Mar-15
7 Warnings
Load re-distributions on the anchors due to elastic deformations of the anchor plate are not considered. The anchor plate is assumed to be
sufficiently stiff, in order not to be deformed when subjected to the loading!
Input data and results must be checked for agreement with the
existing conditions and for plausibility!
Checking the transfer of loads into the base material is required in accordance with ETAG 001, Annex C(2010)Section 7! The software
considers that the grout is installed under the anchor plate without creating air voids and before application of the loads.
The design is only valid if the clearance hole in the fixture is not larger than the value given in Table 4.1 of ETAG 001, Annex C! For larger
diameters of the clearance hole see Chapter 1.1. of ETAG 001, Annex C!
The accessory list in this report is for the information of the user only. In any case, the instructions for use provided with the product have to
be followed to ensure a proper installation.
Input data and results must be checked for agreement with the existing conditions and for plausibility!
PROFIS Anchor ( c ) 2003-2009 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
IS-HN-D1278-2015
656
www.hilti-me.com
Company:
Specifier:
Address:
Phone I Fax:
E-Mail:
Page:
Project:
Sub-Project I Pos. No.:
Date:
5
MQP-21-72
10-Mar-15
8 Installation data
Anchor plate, steel: Anchor type and diameter: HST M12
Profile: U profile; 50 x 80 x 4 x 5 mm
Installation torque: 0.060 kNm
Hole diameter in the fixture: df = 14 mm
Hole diameter in the base material: 12 mm
Plate thickness (input): 6 mm
Hole depth in the base material: 95 mm
Recommended plate thickness: not calculated
Minimum thickness of the base material: 140 mm
Cleaning: Manual cleaning of the drilled hole according to instructions for use is required.
Cleaning
Manual blow-out pump
Setting
Torque wrench
Hammer
40
40
40
93
40
93
25
135
25
x
-68
68
y
0
0
c-x
63
198
c+x
-
c-y
80
80
c+y
-
Input data and results must be checked for agreement with the existing conditions and for plausibility!
PROFIS Anchor ( c ) 2003-2009 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
IS-HN-D1278-2015
657
www.hilti-me.com
Company:
Specifier:
Address:
Phone I Fax:
E-Mail:
Page:
Project:
Sub-Project I Pos. No.:
Date:
6
MQP-21-72
10-Mar-15
Input data and results must be checked for agreement with the existing conditions and for plausibility!
PROFIS Anchor ( c ) 2003-2009 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
IS-HN-D1278-2015
658
Base Material
Cracked Concrete wall, C25/30, f cc = 30.00 MPA
R
www.hilti.sa
659
www.hilti-me.com
Company:
Specifier:
Address:
Phone I Fax:
E-Mail:
Page:
Project:
Sub-Project I Pos. No.:
Date:
1
MQP-45
10-Mar-15
Specifier's comments:
1 Input data
Anchor type and diameter:
HST M12
Material:
Evaluation Service Report:
ETA 98/0001
Issued I Valid:
08-May-13 | 20-Feb-18
Proof:
Stand-off installation:
eb = 0 mm (no stand-off); t = 6 mm
Anchor plate:
Profile:
no profile
Base material:
Reinforcement:
no reinforcement or reinforcement spacing >= 150 mm (any ) or >= 100 mm ( <= 10 mm)
no longitudinal edge reinforcement
Input data and results must be checked for agreement with the existing conditions and for plausibility!
PROFIS Anchor ( c ) 2003-2009 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
IS-HN-D1278-2015
660
www.hilti-me.com
Company:
Specifier:
Address:
Phone I Fax:
E-Mail:
Page:
Project:
Sub-Project I Pos. No.:
Date:
2
MQP-45
10-Mar-15
Shear force y
1.201
Tension
1 x
Capacity [kN]
30.000
Utilization bN [%]
5
Status
OK
Pullout Strength*
1.206
8.764
14
OK
1.206
8.283
15
OK
1.206
10.507
12
OK
Steel Strength*
Splitting failure**
* anchor having the highest loading
gM,s
1.500
NRd,s [kN]
30.000
NSd [kN]
1.206
yc
1.095
gM,p
1.500
NRd,p [kN]
8.764
NSd [kN]
1.206
A0c,N [mm2]
44100
ccr,N [mm]
105
scr,N [mm]
210
ec1,N [mm]
0
yec1,N
1.000
ec2,N [mm]
0
yec2,N
1.000
N0Rk,c [kN]
23.096
gM,c
1.500
NRd,c [kN]
8.283
NSd [kN]
1.206
Ac,N [mm2]
27225
A0c,N [mm2]
44100
ccr,sp [mm]
105
scr,sp [mm]
210
yh,sp
1.268
ec1,N [mm]
0
yec1,N
1.000
ec2,N [mm]
0
yec2,N
1.000
ys,N
0.871
N0Rk,c [kN]
23.096
gM,sp
1.500
NRd,sp [kN]
10.507
NSd [kN]
1.206
ys,N
0.871
yre,N
1.000
k1
7.200
yre,N
1.000
k1
7.200
Input data and results must be checked for agreement with the existing conditions and for plausibility!
PROFIS Anchor ( c ) 2003-2009 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
IS-HN-D1278-2015
661
www.hilti-me.com
Company:
Specifier:
Address:
Phone I Fax:
E-Mail:
Page:
Project:
Sub-Project I Pos. No.:
Date:
3
MQP-45
10-Mar-15
Capacity [kN]
28.000
Utilization bV [%]
5
Status
OK
N/A
N/A
N/A
N/A
Pryout Strength**
1.201
18.224
OK
1.201
9.626
13
OK
gM,s
1.250
VRd,s [kN]
28.000
VSd [kN]
1.201
Ac,N [mm2]
27225
A0c,N [mm2]
44100
ccr,N [mm]
105
scr,N [mm]
210
k-factor
2.200
ec1,V [mm]
0
yec1,N
1.000
ec2,V [mm]
0
yec2,N
1.000
ys,N
0.871
N0Rk,c [kN]
23.096
gM,c,p
1.500
VRd,c1 [kN]
18.224
VSd [kN]
1.201
a
0.108
b
0.072
yec,V
1.000
yre,N
1.000
dnom [mm]
12.0
k1
1.700
c1 [mm]
60
Ac,V [mm2]
13500
A0c,V [mm2]
16200
ys,V
0.900
yh,V
1.000
ya,V
2.500
ec,V [mm]
0
V0Rk,c [kN]
7.701
gM,c
1.500
VRd,c [kN]
9.626
VSd [kN]
1.201
yre,V
1.000
bV
0.125
a
1.500
Status
OK
bN + bV 1
0.893 [kN]
dN
0.016 [mm]
VSk
0.890 [kN]
dV
0.165 [mm]
dNV
0.165 [mm]
dN
0.188 [mm]
dV
0.245 [mm]
dNV
0.309 [mm]
0.893 [kN]
VSk
0.890 [kN]
Comments: Tension displacements are valid with half of the required installation torque moment for uncracked concrete! Shear displacements
are valid without friction between the concrete and the anchor plate! The gap due to the drilled hole and clearance hole tolerances are not
included in this calculation!
The acceptable anchor displacements depend on the fastened construction and must be defined by the designer!
Input data and results must be checked for agreement with the existing conditions and for plausibility!
PROFIS Anchor ( c ) 2003-2009 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
IS-HN-D1278-2015
662
www.hilti-me.com
Company:
Specifier:
Address:
Phone I Fax:
E-Mail:
Page:
Project:
Sub-Project I Pos. No.:
Date:
4
MQP-45
10-Mar-15
7 Warnings
Load re-distributions on the anchors due to elastic deformations of the anchor plate are not considered. The anchor plate is assumed to be
sufficiently stiff, in order not to be deformed when subjected to the loading!
Input data and results must be checked for agreement with the
existing conditions and for plausibility!
Checking the transfer of loads into the base material is required in accordance with ETAG 001, Annex C(2010)Section 7! The software
considers that the grout is installed under the anchor plate without creating air voids and before application of the loads.
The design is only valid if the clearance hole in the fixture is not larger than the value given in Table 4.1 of ETAG 001, Annex C! For larger
diameters of the clearance hole see Chapter 1.1. of ETAG 001, Annex C!
The accessory list in this report is for the information of the user only. In any case, the instructions for use provided with the product have to
be followed to ensure a proper installation.
Input data and results must be checked for agreement with the existing conditions and for plausibility!
PROFIS Anchor ( c ) 2003-2009 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
IS-HN-D1278-2015
663
www.hilti-me.com
Company:
Specifier:
Address:
Phone I Fax:
E-Mail:
Page:
Project:
Sub-Project I Pos. No.:
Date:
5
MQP-45
10-Mar-15
8 Installation data
Anchor plate, steel: Anchor type and diameter: HST M12
Profile: no profile; 0 x 0 x 0 mm
Installation torque: 0.060 kNm
Hole diameter in the fixture: df = 14 mm
Hole diameter in the base material: 12 mm
Plate thickness (input): 6 mm
Hole depth in the base material: 95 mm
Recommended plate thickness: not calculated
Minimum thickness of the base material: 140 mm
Cleaning: Manual cleaning of the drilled hole according to instructions for use is required.
Cleaning
Manual blow-out pump
Setting
Torque wrench
Hammer
y
21
21
21
21
21
21
21
21
x
0
y
0
c-x
60
c+x
-
c-y
60
c+y
-
Input data and results must be checked for agreement with the existing conditions and for plausibility!
PROFIS Anchor ( c ) 2003-2009 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
IS-HN-D1278-2015
664
www.hilti-me.com
Company:
Specifier:
Address:
Phone I Fax:
E-Mail:
Page:
Project:
Sub-Project I Pos. No.:
Date:
6
MQP-45
10-Mar-15
Input data and results must be checked for agreement with the existing conditions and for plausibility!
PROFIS Anchor ( c ) 2003-2009 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
IS-HN-D1278-2015
665
Technical Data
www.hilti.sa
sa.tso@hilti.com
IS-HN-D1278-2015
666
IS-HN-D1278-2015
667
PC Software
and Technical
Information
System MM
Light duty
Medium duty
120
90
25
90
System MQ
Medium duty
Material thickness
Cross-sectional area
Weight of girder
Material
Elastic limit (yield strength)
Permissible tensile stress*
Modulus of elasticity
Shear modulus
Surface
Hot-dip galvanized
25
90
s = 3.5
s=4
s [mm]
A [mm2]
[kg /m]
MI-90
3.5
1002.6
9.43
MI-120
4.0
1375.7
12.60
f y,k [N/mm2]
Zul [N/mm2]
[N/mm2]
[N/mm2]
235.0
152.6
210000
81000
235.0
152.6
210000
81000
75 m
System MQ
Medium duty
HDG
System MQ
Medium duty
Stainless Steel
ey [mm]
ly [cm4]
Wy [cm3]
iy [cm]
45.0
115.34
25.63
3.39
60.0
265.78
44.30
4.40
ez [mm]
lz [cm4]
Wz [cm3]
iz [cm]
45.00
115.34
25.63
3.39
45.00
173.58
38.57
3.55
lt [cm4]
Wt = 2* ABredt * [cm3]
155.56
45.25
297.02
71.63
Torsion data
Torsional moment of inertia
Torsional section modulus
System MI
HDG
* The permissible stress is calculated from D / G/Q with = 1,4. D results from higher yield strength due to cold forming in accordance with DAST-RILI016, issued 1992:
D = fyk / M mit M = 1,1
System MQ
Fixed points
and sliders
System MQ
Airconditioning
and Ventilation
Firestop systems
page 146
page 3
IS-HN-D1278-2015
668
MI-120,
one single load
Einzellast
90
Length of
span [mm]
F [kN]
f [mm]
zul
F1 [kN]
250
500
750
1000
1250
1500
1750
2000
2250
2500
2750
3000
3250
3500
3750
4000
4250
4500
4750
5000
5250
5500
5750
6000
58.75
30.75
20.67
15.54
12.43
10.34
8.85
7.72
6.85
6.14
5.56
5.08
4.67
4.31
4.00
3.73
3.50
3.30
3.10
2.90
2.70
2.60
2.50
2.30
< 0.1
0.3
0.8
1.3
2.1
3.0
4.1
5.4
6.8
8.4
10.2
12.2
14.3
16.6
19.1
21.8
24.6
27.6
30.8
34.2
37.8
41.6
45.5
49.7
3.92
3.41
2.98
2.62
2.31
2.05
1.82
1.61
1.44
1.28
L/2
120
25
25
s = 3.5
90
s=4
f [mm]
L/200
F2 [kN]
f [mm]
L/300
Length of
span [mm]
F [kN]
f [mm]
zul
F1 [kN]
f [mm]
L/200
F2 [kN]
f [mm]
L/300
18.8
20.0
21.3
22.5
23.8
25.0
26.3
27.5
28.8
30.0
6.06
4.97
4.14
3.49
2.97
2.55
2.20
1.91
1.66
1.45
1.27
1.11
0.97
0.85
0.74
8.3
9.2
10.0
10.8
11.7
12.5
13.3
14.2
15.0
15.8
16.7
17.5
18.3
19.2
20.0
250
500
750
1000
1250
1500
1750
2000
2250
2500
2750
3000
3250
3500
3750
4000
4250
4500
4750
5000
5250
5500
5750
6000
101.32
53.13
35.73
26.86
21.50
17.90
15.32
13.38
11.87
10.66
9.66
8.83
8.12
7.51
6.98
6.52
6.10
5.74
5.41
5.11
4.80
4.60
4.50
4.10
< 0.1
0.2
0.6
1.0
1.6
2.3
3.1
4.0
5.1
6.3
7.7
9.1
10.7
12.4
14.3
16.3
18.4
20.7
23.1
25.6
28.2
31.0
34.0
37.1
4.98
4.47
4.01
3.62
3.27
25.0
26.3
27.5
28.8
30.0
7.03
6.07
5.28
4.62
4.07
3.60
3.20
2.85
2.54
2.27
2.03
11.7
12.5
13.3
14.2
15.0
15.8
16.7
17.5
18.3
19.2
20.0
Selection of framing section for single span with max. load when f < L/200
Single central load incl. framing sections own weight
F[kN]
L
50.00
40.00
30.00
System MQ
Fixed points
and sliders
Load F (kN)
35.00
System MI
HDG
MI-90
MI-120
MQ-21 D/F*
MQ-41 D/F*
MQ-41/F*
MQ-52-72 D/F*
45.00
L/2
90
System MM
Light duty
Medium duty
L/2
L
System MQ
Medium duty
Stainless Steel
L/2
50
50
System MQ
Medium duty
System MQ
Medium duty
HDG
MI-90,
one single load
Einzellast
PC Software
and Technical
Information
25.00
20.00
10.00
5.00
0.00
-5.00
500
1000
1500
2000
2500
3000
*Technical data for the MQ System can be found in the Installations Systems main catalogue.
page 147
page 4
IS-HN-D1278-2015
Firestop systems
System MQ
Airconditioning
and Ventilation
15.00
669
PC Software
and Technical
Information
System MM
Light duty
Medium duty
System MQ
Medium duty
System MQ
Medium duty
HDG
System MQ
Medium duty
Stainless Steel
System MI
HDG
System MQ
Fixed points
and sliders
System MQ
Airconditioning
and Ventilation
Firestop systems
IS-HN-D1278-2015
670
page 148
Hilti MI
MI industrial
industrial pipe
pipe support
support system
system
Hilti
PC Software
and Technical
Information
connectors:
MI connectors:
Pedestal connector
connector
System MM
Light duty
Medium duty
Advantages
Advantages
adjustment in
in 55 mm
mm increments
increments for
formaximum
maximumflexibility.
flexibility.
Fine adjustment
hold for
for optimum
optimum transmission
transmission of
offorces
forcesand
andmoments.
moments.
Keyed hold
Pedestal connector
connector with
with connecting
connecting parts
parts
Weight
Weightper
per
set
set[kg]
[kg]
2.04
2.04
MI-90/MI-120
MI-90/MI-120
Items
in
in set
set aus:
Set besteht
besteht
aus:
Ordering
Orderingdesignation
designation
Item
Itemno.
no.
MIC-T
MIC-T
304807
304807
88
120
120
Package
Package
contents
contents
22
220
220
2x
2x
System MQ
Medium duty
HDG
For
For girder
girder type
type
System MQ
Medium duty
S235
S235JRG2
JRG2as
asper
perDIN
DINEN
EN 10
10025
025
Hot-dip
Hot-dipgalvanized
galvanized55
55m
m
75
75
2x
Technical data
data
Material:
Galvanizing:
Galvanizing:
2x
2x
Firestop systems
System MQ
Airconditioning
and Ventilation
System MQ
Fixed points
and sliders
System MI
HDG
System MQ
Medium duty
Stainless Steel
2x
page 151
page 14
page 14
IS-HN-D1278-2015
671
PC Software
and Technical
Information
System MM
Light duty
Medium duty
System MQ
Medium duty
System MQ
Medium duty
HDG
System MQ
Medium duty
Stainless Steel
System MI
HDG
System MQ
Fixed points
and sliders
System MQ
Airconditioning
and Ventilation
Firestop systems
IS-HN-D1278-2015
672
page 152
PC Software
and Technical
Information
System MM
Light duty
Medium duty
System MQ
Medium duty
System MQ
Medium duty
HDG
System MQ
Medium duty
Stainless Steel
System MI
HDG
System MQ
Fixed points
and sliders
System MQ
Airconditioning
and Ventilation
Firestop systems
IS-HN-D1278-2015
673
page 154
PC Software
and Technical
Information
MI concrete connectors:
Connection to concrete
System MM
Light duty
Medium duty
Advantages
Four elongated holes for easy wall mounting.
mounting.
Designed for ceiling, wall and floor mounting.
mounting.
System MQ
Medium duty
S235 JRG2
JRG2 as
as per
per DIN
DIN EN
EN 10
10 025
025
Hot-dip galvanized
galvanized 55
55 m
m
3.51
7.32
7.69
100
100
MIC-C90-AA
MIC-C90-AA
MIC-C90-D
MIC-C90-D
MIC-C120-D
MIC-C120-D
Item
Itemno
no
304825
304825
304827
304827
304829
304829
Package
Package
contents
contents
Ordering
Orderingdesignation
designation
22
22
22
230
230
156
156
15
15
140
140
140
140
140
200
140 200
MI-90
MI-90
156
156
MI-90
MI-90
230
230
47
47xx17
17
Note:
Note:
++
Designed
Designed for
for cantilever
cantilever applications.
applications.May
Maybe
besupported
supportedat
atonly
onlyone
oneend.
end.
2x
2x
System MQ
Fixed points
and sliders
Items
in
Set
Items
in set
set aus:
Set besteht
besteht
aus:
156
156
230
230
47
47xx17
17
Note:
Note:
Always
Always to
to be
be supported
supported at
at opposite
opposite end.
end.
230
230
156
156
15
15
12
12
System MQ
Medium duty
HDG
MI-90
MI-90
MI-120
Weight
Weight per
per
set
set [kg]
[kg]
System MI
HDG
For
For girder
girder type
type
System MQ
Medium duty
Stainless Steel
Technical data
Material:
Galvanizing:
Firestop systems
System MQ
Airconditioning
and Ventilation
2x
2x
page 155
page 18
page 18
IS-HN-D1278-2015
674
PC Software
and Technical
Information
System MM
Light duty
Medium duty
System MQ
Medium duty
System MQ
Medium duty
HDG
System MQ
Medium duty
Stainless Steel
System MI
HDG
System MQ
Fixed points
and sliders
System MQ
Airconditioning
and Ventilation
Firestop systems
IS-HN-D1278-2015
675
page 156
PC Software
and Technical
Information
System MM
Light duty
Medium duty
System MQ
Medium duty
System MQ
Medium duty
HDG
System MQ
Medium duty
Stainless Steel
System MI
HDG
System MQ
Fixed points
and sliders
System MQ
Airconditioning
and Ventilation
Firestop systems
IS-HN-D1278-2015
676
page 158
Firestop systems
System MQ
Airconditioning
and Ventilation
System MQ
Fixed points
and sliders
System MI
HDG
System MQ
Medium duty
Stainless Steel
System MQ
Medium duty
HDG
System MQ
Medium duty
System MM
Light duty
Medium duty
PC Software
and Technical
Information
page 159
IS-HN-D1278-2015
677
PC Software
and Technical
Information
System MM
Light duty
Medium duty
System MQ
Medium duty
System MQ
Medium duty
HDG
431587
431588
431589
431590
431591
431592
431593
431594
431595
431598
System MQ
Medium duty
Stainless Steel
System MI
HDG
System MQ
Fixed points
and sliders
System MQ
Airconditioning
and Ventilation
Firestop systems
IS-HN-D1278-2015
678
page 160
Fz
Fz
FyF
s s
Fy F
DaD
Advantages
Advantages
With mounting
mounting holes
holesfor
forinstalling
installinglight-duty
light-dutyfixed
fixedpoints.
points.
Da D
s s
Fz Fz
L1 L
1
WW
L L
F F
W
+ Fz
+ Fz
+ F+z F
11ring
ring/ 1/ 1rib
rib
for
forDN25-DN150
DN25-DN150
B
H H
H
Fx F H
x
F F
1313
Da D
a
B B
B B
FxF H H
x
Fz Fz
L1 L
1
Fy F
y
13 13 L
Fx F
x
W W
13 13 L
+ Fz
+ Fz
2 2rings
rings/ 1/ 1ribrib
forforDN25-DN300
DN25-DN300
Heavy-duty
version
Heavy-duty
version
forfor
DN200-DN600
DN200-DN600
Sliding
Slidingsupport
supportclamps
clamps
Fixed
point
Fixed
point
7575
System MM
Light duty
Medium duty
MI pipe
pipe clamps:
clamps:
Pipe supports
supports for
for insulated
insulated pipes
pipes
PC Software
and Technical
Information
Hilti
Hilti MI
MI industrial
industrial pipe
pipe support
support system
system
25
25
25
25
40
40
40
40
50
50
50
50
65
65
65
65
80
80
80
80
100
100
100
100
125
125
125
125
150
150
150
150
25
25
25
25
40
40
40
40
50
50
50
50
65
65
65
65
80
80
80
80
100
100
100
100
125
125
125
125
150
150
150
200
200
200
250
250
250
300
300
300
Pipe outside
Pipe outside
diameter
Da
diameter Da
[mm]
[mm]
33.7
33.7
33.7
33.7
48.3
48.3
48.3
48.3
60.3
60.3
60.3
60.3
76.1
76.1
76.1
76.1
88.9
88.9
88.9
88.9
114.3
114.3
114.3
114.3
139.7
139.7
139.7
139.7
168.3
168.3
168.3
168.3
21.3
21.3
21.3
21.3
48.3
48.3
48.3
48.3
60.3
60.3
60.3
60.3
76.1
76.1
76.1
76.1
88.9
88.9
88.9
88.9
114.3
114.3
114.3
114.3
139.7
139.7
139.7
139.7
168.3
168.3
168.3
168.3
219.1
219.1
219.1
219.1
273.0
273.0
273.0
273.0
323.9
323.9
323.9
323.9
B
B
[mm]
[mm]
30
30
30
30
30
30
30
30
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
30
30
30
30
30
30
30
30
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
50
50
50
50
50
50
50
50
50
50
50
50
s
F
s
F
[mm] [mm]
[mm] [mm]
66
6
6
6
6
6
6
6
6
6
6
6
6
6
66
66
86
88
88
88
88
88
8
5
55
55
55
65
66
66
66
66
66
86
88
88
88
88
88
88
88
88
88
88
88
8
99
8
8
9
9
8
8
9
9
8
8
9
9
8
98
89
98
89
98
89
98
89
8
9
99
99
99
99
99
99
99
99
99
99
99
99
99
99
99
99
99
99
99
99
99
9
W
H
W
H
[mm] [mm]
[mm] [mm]
80
80
82
82
80
80
82
82
80
80
82
82
80
80
82
82
80
80
82
82
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
100
100
100
100
100
100
100
100
100
100
100
100
85
85
140
140
85
85
140
140
85
85
140
140
85
85
140
140
85
85
140
140
85
85
140
140
85
85
140
140
85
85
140
140
85
85
140
140
85
85
140
140
85
85
140
140
85
85
140
140
85
85
140
140
85
85
140
140
85
85
140
140
85
85
140
140
107
107
142
142
107
107
142
142
107
107
142
142
L
L
[mm]
[mm]
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
L1
L1
[mm]
[mm]
200
200
180
180
200
200
180
180
190
190
180
180
190
190
180
180
190
190
180
180
190
190
180
180
190
190
180
180
190
190
180
180
180
180
180
180
180
180
180
180
180
180
180
180
Clamping
Clamping
screw
screw
M10
M10
M10
M10
M10
M10
M10
M10
M12
M12
M12
M12
M12
M12
M12
M12
M12
M12
M12
M12
M12
M12
M12
M12
M12
M12
M12
M12
M12
M12
M12
M12
M10
M10
M10
M10
M10
M10
M10
M10
M12
M12
M12
M12
M12
M12
M12
M12
M12
M12
M12
M12
M12
M12
M12
M12
M12
M12
M12
M12
M12
M12
M12
M12
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
Weight per
Permissible loads
Weight per Fx
Permissible
loads
set
+ Fz
Fz
set
Fx
+ Fz
Fz
[kg]
(kN)
(kN)
(kN)
[kg]
(kN) (kN)
(kN)
2.8
2.8
2.4
2.4
2.8
2.8
2.4
2.4
3.2
3.2
2.7
2.7
3.3
3.3
2.8
2.8
3.3
3.3
2.9
2.9
3.8
3.8
3.4
3.4
4.0
4.0
3.6
3.6
4.2
4.2
3.8
3.8
3.3
3.3
3.7
3.7
3.4
3.4
3.8
3.8
4.1
4.1
4.5
4.5
4.3
4.3
4.7
4.7
4.4
4.4
4.8
4.8
5.3
5.3
5.8
5.8
5.7
5.7
6.1
6.1
6.1
6.1
6.6
6.6
8.5
8.5
8.9
8.9
9.5
9.5
9.9
9.9
10.5
10.5
10.9
10.9
0.4
0.4
0.4
0.4
0.5
0.5
0.5
0.5
0.9
0.9
0.9
0.9
1.1
1.1
1.1
1.1
1.2
1.2
1.2
1.2
2.5
2.5
2.5
2.5
2.9
2.9
2.9
2.9
3.2
3.2
3.2
3.2
0.8
0.8
0.8
0.8
1.0
1.0
1.0
1.0
1.8
1.8
1.8
1.8
2.1
2.1
2.1
2.1
2.4
2.4
2.4
2.4
3.0
3.0
3.0
3.0
3.5
3.5
3.5
3.5
4.0
4.0
4.0
4.0
4.8
4.8
4.8
4.8
5.3
5.3
5.3
5.3
5.8
5.8
5.8
5.8
0.8
0.8
0.8
0.8
1.0
1.0
1.0
1.0
1.8
1.8
1.8
1.8
2.1
2.1
2.1
2.1
2.3
2.3
2.3
2.3
5.0
5.0
5.0
5.0
5.8
5.8
5.8
5.8
6.4
6.4
6.4
6.4
1.5
1.5
1.5
1.5
2.0
2.0
2.0
2.0
3.5
3.5
3.5
3.5
4.2
4.2
4.2
4.2
4.7
4.7
4.7
4.7
6.0
6.0
6.0
6.0
7.0
7.0
7.0
7.0
8.0
8.0
8.0
8.0
9.5
9.5
9.5
9.5
10.5
10.5
10.5
10.5
11.5
11.5
11.5
11.5
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.6
0.6
0.6
0.6
0.7
0.7
0.7
0.7
0.8
0.8
0.8
0.8
1.7
1.7
1.7
1.7
1.9
1.9
1.9
1.9
2.1
2.1
2.1
2.1
0.5
0.5
0.5
0.5
0.7
0.7
0.7
0.7
1.2
1.2
1.2
1.2
1.4
1.4
1.4
1.4
1.6
1.6
1.6
1.6
2.0
2.0
2.0
2.0
2.3
2.3
2.3
2.3
2.7
2.7
2.7
2.7
3.2
3.2
3.2
3.2
3.5
3.5
3.5
3.5
3.8
3.8
3.8
3.8
Fy
Fy
(kN)
(kN)
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.6
0.6
0.6
0.6
0.7
0.7
0.7
0.7
0.8
0.8
0.8
0.8
1.7
1.7
1.7
1.7
1.9
1.9
1.9
1.9
2.1
2.1
2.1
2.1
0.5
0.5
0.5
0.5
0.7
0.7
0.7
0.7
1.2
1.2
1.2
1.2
1.4
1.4
1.4
1.4
1.6
1.6
1.6
1.6
2.0
2.0
2.0
2.0
2.3
2.3
2.3
2.3
2.7
2.7
2.7
2.7
3.2
3.2
3.2
3.2
3.5
3.5
3.5
3.5
3.8
3.8
3.8
3.8
Ordering designation
Ordering designation
MI-PS1/1 25-85
MI-PS1/1 25-85
MI-PS1/1 25-140
MI-PS1/1 25-140
MI-PS1/1
MI-PS1/140-85
40-85
MI-PS1/1
MI-PS1/140-140
40-140
MI-PS1/1
50-85
MI-PS1/1 50-85
MI-PS1/1
MI-PS1/150-140
50-140
MI-PS1/1 65-85
MI-PS1/1 65-85
MI-PS1/1
65-140
MI-PS1/180-85
65-140
MI-PS1/1
MI-PS1/1
80-85
MI-PS1/1 80-140
MI-PS1/1100-85
80-140
MI-PS1/1
MI-PS1/1100-140
100-85
MI-PS1/1
MI-PS1/1125-85
100-140
MI-PS1/1
MI-PS1/1125-140
125-85
MI-PS1/1
MI-PS1/1150-85
125-140
MI-PS1/1
MI-PS1/1150-140
150-85
MI-PS1/1
MI-PS1/1 150-140
MI-PS2/1 25-85
MI-PS2/125-140
25-85
MI-PS2/1
MI-PS2/140-85
25-140
MI-PS2/1
MI-PS2/140-140
40-85
MI-PS2/1
MI-PS2/150-85
40-140
MI-PS2/1
MI-PS2/150-140
50-85
MI-PS2/1
MI-PS2/165-85
50-140
MI-PS2/1
MI-PS2/165-140
65-85
MI-PS2/1
MI-PS2/180-85
65-140
MI-PS2/1
MI-PS2/180-140
80-85
MI-PS2/1
MI-PS2/1100-85
80-140
MI-PS2/1
MI-PS2/1100-140
100-85
MI-PS2/1
MI-PS2/1125-85
100-140
MI-PS2/1
MI-PS2/1125-140
125-85
MI-PS2/1
MI-PS2/1150-85
125-140
MI-PS2/1
MI-PS2/1150-140
150-85
MI-PS2/1
MI-PS2/1200-107
150-140
MI-PS2/1
MI-PS2/1200-142
200-107
MI-PS2/1
MI-PS2/1250-107
200-142
MI-PS2/1
MI-PS2/1250-142
250-107
MI-PS2/1
MI-PS2/1300-107
250-142
MI-PS2/1
MI-PS2/1300-142
300-107
MI-PS2/1
MI-PS2/1 300-142
Item no.
Package
Item no. contents
Package
contents
304844
304844
286957
286957
304845
304845
286958
286958
304846
304846
286959
286959
304847
304847
286960
286960
304848
304848
286961
286961
304849
304849
286962
286962
304850
304850
286963
286963
304851
304851
286964
286964
304852
304852
286965
286965
304853
304853
286966
286966
304854
304854
286967
286967
304855
304855
286968
286968
304856
304856
286969
286969
304857
304857
286970
286970
304858
304858
286971
286971
304859
304859
286972
286972
304860
304860
286973
286973
304861
304861
286974
286974
304862
304862
286975
286975
22
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
22
22
22
22
22
22
22
2
2
22
22
22
22
22
22
22
22
22
22
22
12
11
11
11
11
11
11
11
11
11
1
Nominal
Nominal
size
size
NW
NW
System MQ
Medium duty
HDG
System MQ
Medium duty
Stainless Steel
Low-friction
Low-frictionplate
plate
System MI
HDG
System MQ
Fixed points
and sliders
System MQ
Airconditioning
and Ventilation
Technical
Technical data
data for
for the
theclamping
clampingsystem
system
Material:
S235
Material:
S235JRG2
JRG2as
asper
perDIN
DINEN
EN10025
10025
Galvanizing:
Hot-dip
galvanized
70
m
Galvanizing:
Hot-dip galvanized 70 m
Temperatures:
Up
Temperatures:
Upto
to300
300C
C
System MQ
Medium duty
55
Firestop systems
* The maximum permissible loads for connecting components must be taken into account when the pipe support is used!
* The maximum permissible loads for connecting components must be taken into account when the pipe support is used!
page 26
page 161
page 26
IS-HN-D1278-2015
679
Hilti
industrial
system
pipe
support
system
Hilti MI
MIMI
industrial
pipe
support
system
System
- Industrial
Pipe
and Electrical
Support
PC Software
and Technical
Information
MI accessories:
accessories:
Individual
Individual connecting
connectingparts
parts
System MM
Light duty
Medium duty
Advantages
Advantages
prevent
(shaped
totoprevent
Parts
Parts designed
designedfor
foreasy
easyassembly
assemblywith
withone
onehand
hand(shaped
(shapedto
prevent
rotation).
rotation).
adjustment
ofof
Easy
Easy hand
handplate
plate(5)
(5)for
foreasy
easysingle-handed
single-handedadjustment
adjustmentof
the
the connection.
connection.
System MQ
Medium duty
Technical
Technical data
data
Material:
Material:
Screws:
Screws:
Nuts:
Nuts:
Galvanizing:
Galvanizing:
System MQ
Medium duty
HDG
MI-90
MI-90
MI-120
MI-120
MI-90
MI-90
MI-120
MI-120MI-120
MI-90,
MI-90, MI-120
MI-120
MI-90,
MI-90, MI-120
MI-120
MI-90,
MI-90, MI-120
MI-120
MI-90,
MI-90, MI-120
MI-120
MI-90,
MI-90, MI-120
MI-120
MI-90,
MI-90, MI-120
EN-GJMW-400-5
EN
1562
EN-GJMW-400-5asasper
perDIN
DINEN
EN1562
1562
8.8 grade
8.8 grade
8 grade DIN 1661, self locking
8 grade DIN 1661, selflocking
locking
45 m
45 m
Weight
Weight per
per
Weight
set
[kg]
set
[kg] per
set [kg]
0,16
0,16
0,19
0,19
0,10
0,10
0,13
0,13
0,28
0,28
0,02
0,02
0,06
0,06
0,10
0,10
0,11
0,11
0,005
0,005
Ordering
designation
Ordering designation
Ordering designation
Item
Itemno.
no.
Item no.
MIA-EH90
MIA-EH120
MIA-EH90
MIA-OH90
MIA-EH120
MIA-OH120
MIA-OH90
MIA-EH-P
MIA-OH120
M12-F
MIA-EH-P
hex.collar
hex.collar nut
nut
MIA-TP
M12-F hex.collar nut
Hex.head
MIA-TP screw M12120-F/8.8
M12120-F/8.8
Hex.headscrew
screwM12130-F/8.8
M12120-F/8.8
Hex.head
M12130-F/8.8
screw M12130-F/8.8
AHex.head
13-F washer
A 13-F washer
304887
304887
304887
304888
304888
304888
304889
304889
304889
304890
304890
304890
304891
304891
304891
283589
283589
283589
305707
305707
305707
283595
283595
283595
283596
283596
283596
304771
304771
304771
System MQ
Medium duty
Stainless Steel
11
1
36,6
36,6
36,6
36,6
36,6
36,6
36,6
36,6
36,6
120
120
120
150
150
150
M12
M12
M12
M12
M12
M12
127
127
127
M12
M12
M12
2.
2.
2.
System MI
HDG
M12
M12
M12
2-3x
2-3x
1.
1.
1.
72
72
72
12,2
12,2xx12,2
12,2
12,2 x 12,2
77
System MQ
Fixed points
and sliders
50
50
50
44
4
System MQ
Airconditioning
and Ventilation
1.
1.
1.
10
10
10
10
10
10
1010
10
1010
10
1010
50
5010
20
2050
40
4020
40
4040
100
10040
100
36,6
36,6
36,6
95
95
95
22
2
33
3
Packege
Packege
Packege
contents
contents
contents
36,6
36,6
36,6
36,6
36,6
36,6
2.
2.
2.
Firestop systems
page 32
page 32
page
162
page 32
IS-HN-D1278-2015
680
1x
1x
1x
1x
2x
PC Software
and Technical
Information
Hilti MIC-TRC
Connector for threaded rod
2x
2x
1x
System MQ
Medium duty
1x
System MM
Light duty
Medium duty
2x
2x
Advantages
Easy to install single-handed installation!
Opposite side of MI girder still usable for other applications
1x Connector can be used on top or bottom of MI girder
With MI-9030 mm height adjustability (with MI-120 15 mm)
1x
1x
MQ channel fits between MIC-TRC and MI girder
2x
Technical data
Material:
Galvanizing:
Connecting screws:
1x
MI-90/ MI-120
MI-90/ MI-120
MI-90/ MI-120
1x
1x
Weight per
set [kg]
Package
contents
0.982
0.893
1.003
2
2
2
Ordering
designation
MIC-TRC M12-12
MIC-TRC M16
MIC-TRC M20-34
Item no.
233856
233857
233858
MI-90: 50
MI-120: 35
System MQ
Medium duty
HDG
For girder
type
Items in set :
1x
1x
1x
1x
1x1x
1x
1x
1x
1x
75
1x
System MQ
Medium duty
Stainless Steel
1x
System MI
HDG
1x
Items in set :
1x
1x
1x
1x 1x
1x
1x
1x1x
1x
1x
1x
1x
1x1x
1x
1x
1x
1x
1x
1x
System MQ
Airconditioning
and Ventilation
1x
1x
System MQ
Fixed points
and sliders
1x 1x
1x
Items in set :
1x
1x
Firestop systems
1x
1x
1x
1x
page 167
page 38
IS-HN-D1278-2015
681
MQ Channel Installation
Galvanized
Hilti. Outperform. Outlast.
page 22
IS-HN-D1278-2015
682
System MQ
"open"
z-axis
41.3
41.3
41.3
2.75
41.3
41.3
124
124
41.2
52
41.3
82.6
72
41.3
2.75
2.5
41.3
e2
y-axis
31
e1
2.5
e1
20.6
e2
41.3
Denition of axes
Channel sections
2
PC Software
and Technical
Information
Technical data
41.3
41.3
41.3
System MM
Light duty
Medium duty
System MQ
Medium duty
Hilti Pipe Rings
System MQ
Medium duty
HDG
System MQ
Medium duty
Stainless Steel
System MI
HDG
System MQ
Fixed points
and sliders
System MQ
Airconditioning
and Ventilation
F (kN)
0 .2 5
0 .5 0
0 .7 5
1.00
1 .2 5
1 .5 0
1 .7 5
2 .0 0
2 .2 5
2 .5 0
2 .7 5
3 .0 0
3 .5 0
4 .0 0
4 .5 0
5 .0 0
6 .0 0
7 .0 0
8 .0 0
1 3 3 6 .7 2 1 8 1 0 .9 3 0 6 1 5 .3 3 3 7 1 6 .8 4 1 9 2 0 .9 5 9 9 2 9 .9 2 8 8 1 4 .4 6 1 4 3 0 .7 9 3 6 4 6 .8 1 0 3 4 5 1 .7
9 5 4 .8 1 5 9 7 .9 2 2 6 1 1 .3 2 5 4 1 2 .7 3 2 1 1 6 .0 4 8 2 2 4 .1 2 1 6 1 0 .8 4 9 6 2 4 .8 8 2 1 4 1 .0 9 3 8 4 6 .9
7 8 3 .9 1 3 1 6 .5 1 8 7 9 .3 2 1 2 1 0 .6 2 6 8 1 3 .4 4 1 1 2 0 .5 1 7 9 9 .0 4 2 4 2 1 .2 7 3 5 3 6 .8
4 3 .0
5 1 1 .8
4 2 1 .2
36 < 1
32 < 1
28 < 1
25 < 1
23 < 1
21 < 1
18 < 1
16 < 1
14 < 1
12 < 1
10 < 1
9 <1
7 <1
94
78
67
59
52
47
43
39
34
29
26
23
19
17
14
Firestop systems
Selection example:
1.0 kN ( 100 kg) should be carried by a channel with a channel span
width L = 100 cm (single span simply supported).
Solution:
Select the line showing the load, F = 1.0 kN.
The MQ-31 to MQ-124X D channels can be used because the
permissible span width (tabulated value) is larger or equal
to the required span, L = 100 cm.
1)
2)
y1
4 .0 1 4 1
2 .8 1 1 8
2 .0 1 0 1
1 .6 8 9
1 .2 7 9
1 .0 7 1
< 1 65
< 1 59
< 1 51
< 1 44
< 1 39
< 1 36
< 1 30
< 1 25
< 1 22
6 .6
4 .6
3 .4
2 .6
2 .1
1 .7
1 .4
1 .2
<1
<1
<1
<1
<1
<1
<1
166
152
139
122
108
98
89
82
70
61
54
49
41
35
31
8 .3
7 .6
6 .7
5 .2
4 .1
3 .3
2 .8
2 .3
1 .7
1 .3
1 .0
<1
<1
<1
<1
2 1 1 1 0 .5 3 2 9
1 9 3 9 .7 3 0 3
1 7 5 8 .3 2 8 2
1 5 4 6 .5 2 6 4
1 3 7 5 .1 2 3 8
1 2 3 4 .2 2 1 5
1 1 2 3 .5 1 9 6
1 0 3 2 .9 1 8 0
8 8 2 .2 1 5 5
7 7 1 .7 1 3 6
6 9 1 .3 1 2 1
6 2 1 .1 1 0 9
52 < 1 91
44 < 1 78
39 < 1 68
1 6 .5 1 4 0
1 5 .1 1 2 0
1 4 .1 1 0 3
1 3 .2 9 0
1 0 .8 8 0
8 .9 7 2
7 .4 6 6
6 .3 6 0
4 .6
3 .6
2 .8
2 .3
1 .6
1 .2
<1
7 .0
5 .3
3 .9
3 .0
2 .4
1 .9
1 .6
1 .3
340
313
288
254
227
205
187
172
148
129
115
104
87
1 7 .0
1 5 .6
1 4 .1
1 1 .0
8 .9
7 .3
6 .1
5 .1
3 .8
2 .9
2 .3
1 .9
1 .3
618
576
541
511
486
464
444
415
360
317
284
256
215
185
162
3 0 .9
2 8 .8
2 7 .0
2 5 .6
2 4 .3
2 3 .2
2 2 .2
1 9 .7
1 5 .0
1 1 .7
9 .4
7 .7
5 .5
4 .0
3 .1
745
701
663
630
601
576
554
534
499
466
418
380
320
276
243
3 7 .2
3 5 .0
3 3 .1
3 1 .5
3 0 .1
2 8 .8
2 7 .7
2 6 .7
2 4 .9
2 2 .9
1 8 .7
1 5 .5
1 1 .1
8 .3
6 .5
Single load
Conversion
1 kp
1 kg
1N
1 kN
kp
1
0.1
100
kg
1
0.1
100
N
10
10
1000
kN
0.01
0.01
0.001
F [kN]
L/2
L/2
L [cm]
F
page 244
page
IS-HN-D1278-2015
683
Firestop systems
System MQ
Airconditioning
and Ventilation
System MQ
Fixed points
and sliders
System MI
HDG
System MQ
Medium duty
Stainless Steel
System MQ
Medium duty
HDG
System MQ
Medium duty
System MM
Light duty
Medium duty
PC Software
and Technical
Information
System
MQ
System
SystemMQ
MQ
page 45
page 25
IS-HN-D1278-2015
684
System MQ
MQ-72
20.00
15.00
System MM
Light duty
Medium duty
MQ-52
F[kN]
10.00 MQ-41/3
L/2
MQ-41
L/2
MQ-31
5.00
L[cm]
System MQ
Medium duty
MQ-21
0.00
25
50
100
150
200
250
300
Span width (cm)
Load, F (kN)
30.00
MQ-124X D
25.00
20.00
System MQ
Medium duty
HDG
15.00
MQ-52-72D
10.00
System MQ
Medium duty
Stainless Steel
MQ-41D
5.00
0.00
MQ-21D
0 25
100
200
300
400
500
600
Span width (cm)
2.5
L[cm]
72
41.3
41.3
41.3
41.3
41.2
41.3
41.3
20.6
31
41.3
41.3
41.3
52
2
2
System MQ
Fixed points
and sliders
L/2
124
F[kN]
L/2
2.75
2.5
124
System MI
HDG
82.6
PC Software
and Technical
Information
Load, F (kN)
25.00
2.75
41.3
41.3
41.3
System MQ
Airconditioning
and Ventilation
Firestop systems
25
50
75
100
125
150
175
200
225
275
300
2 .5 3
1 .2 7
0 .8 2
0 .4 5
0 .2 8
0 .1 9
0 .1 4
0 .1 0
0 .0 7
0 .0 5
0 .0 4
<1
1 .7
3 .8
5 .0
6 .3
7 .5
8 .8
1 0 .0
1 1 .3
1 2 .5
1 3 .8
4 .6 8
2 .3 5
1 .5 6
1 .1 7
0 .8 2
0 .5 7
0 .4 1
0 .3 1
0 .2 3
0 .1 8
0 .1 4
<1
1 .1
2 .5
4 .5
6 .3
7 .5
8 .8
1 0 .0
1 1 .3
1 2 .5
1 3 .8
7 .0 8
3 .5 6
2 .3 7
1 .7 7
1 .4 1
1 .1 7
0 .8 6
0 .6 5
0 .5 1
0 .4 0
0 .3 2
<1
<1
1 .9
3 .3
5 .2
7 .4
8 .8
1 0 .0
1 1 .3
1 2 .5
1 3 .8
9 .7 8
4 .9 0
3 .2 6
2 .4 4
1 .9 5
1 .5 4
1 .1 2
0 .8 5
0 .6 6
0 .5 2
0 .4 2
0 .2
0 .9
2 .0
3 .5
5 .4
7 .5
8 .8
1 0 .0
1 1 .3
1 2 .5
1 3 .8
1 2 .3 6
6 .2 0
4 .1 3
3 .0 9
2 .4 7
2 .0 5
1 .7 5
1 .4 0
1 .0 9
0 .8 7
0 .7 1
page 46
IS-HN-D1278-2015
<1
<1
1 .5
2 .7
4 .2
6 .1
8 .3
1 0 .0
1 1 .3
1 2 .5
1 3 .8
2 1 .7 5
1 0 .9 2
7 .2 7
5 .4 5
4 .3 5
3 .6 2
3 .0 9
2 .6 9
2 .3 9
2 .1 4
1 .8 4
<1
<1
1 .1
1 .9
3 .0
4 .3
5 .8
7 .6
9 .6
1 1 .9
1 3 .8
3 .0 0
3 .0 0
2 .4 2
1 .8 1
1 .4 4
1 .0 9
0 .7 9
0 .5 9
0 .4 6
0 .3 6
0 .2 8
<1
<1
2 .0
3 .6
5 .7
7 .5
8 .8
1 0 .0
1 1 .3
1 2 .5
1 3 .8
6 .0 0
6 .0 0
6 .0 0
5 .1 9
4 .1 4
3 .4 4
2 .9 4
2 .5 6
2 .2 7
2 .0 3
1 .8 4
<1
<1
<1
1 .7
2 .6
3 .8
5 .2
6 .8
8 .6
1 0 .6
1 2 .8
1 1 .2 0
1 1 .2 0
1 1 .2 0
1 1 .2 0
1 0 .3 9
8 .6 5
7 .3 9
6 .4 5
5 .7 2
5 .1 3
4 .6 5
<1
<1
<1
<1
1 .8
2 .5
3 .4
4 .5
5 .7
7 .0
8 .5
685
F1 = q i
1/
2
F1 [N]
1/
2
Type of load 4
F2 F2
1/
3
F1 [N]
F1 [N]
1/
3
Type of load 5
F3 F3 F3
1/ 1/ 1/ 1/
4 4 4 4
1/
3
F2 [N]
F3 [N]
1050
700
2950
1960
1470
840
4070
2710
2020
1470
840
6040
4520
3010
2000
1490
2560
1050
700
2950
1960
1470
840
3320
2200
1640
1470
840
3180
2380
3010
2000
1490
1400
1050
700
1460
970
720
420
1460
970
720
1470
840
1370
1020
1460
970
720
580
420
180
1480
980
620
210
2040
1350
810
620
210
3020
2260
1510
1000
570
1270
420
180
1480
980
620
210
1660
1100
810
620
210
1590
1190
1510
1000
570
700
420
180
730
480
360
210
730
480
360
620
210
680
510
730
480
360
290
520
310
1470
980
730
360
2030
1350
1010
730
360
3020
2260
1500
1000
740
1280
520
310
1470
980
730
360
1660
1100
820
730
360
1590
1190
1500
1000
740
700
520
310
730
480
360
210
730
480
360
730
360
680
510
730
480
360
290
350
190
980
650
490
220
1350
900
670
490
220
2010
1500
1000
660
490
850
350
190
980
650
490
220
1100
730
540
490
220
1060
790
1000
660
490
460
350
190
480
320
240
140
480
320
240
490
220
450
340
480
320
240
190
Bracket
MQK-21/450
MQK-41/450
MQK-41/600
MQK-41/1000
MQK-41/3/450
MQK-41/3/600
MQK-41/600/4
MQK-41/1000/4
MQK-72/450
MQK-72/600
MQK-21 D/450
MQK-21 D/600
MQK-21 D/1000
L (mm)
Brace 5)
450
450
600
1000
450
600
600
1000
450
600
450
600
1000
short
short
long
long
short
long
long
long
short
long
short
long
long
1/2
F1 [N] 1)
Bracket 4) HUS 12,5 3)
5460
5460
6390
6110
5690
5690
2250
2250
6380
6110
5680
5680
5690
5690
2250
2250
6380
6100
5680
5680
6380
6110
5680
5680
3380
3380
F1
Type of load 3
F1
1/
2
F1 [N] 1)
Bracket 4) HUS 12,5 3)
1410
1410
3960
3960
2960
2960
3400
3400
5450
5450
4080
4080
2960
2960
3400
3400
6380
6100
5680
5680
4040
4040
3030
3030
3380
3380
Type of load 4
Type of load 5
F2 F2
F3 F3 F3
1/4 1/4 1/4 1/4
1/3
F1 [N] 1)
Bracket 4) HUS 12,5 3)
520
520
2750
2750
2840
2840
430
430
3190
2960
2840
2840
2840
2840
430
430
3190
2960
2840
2840
2810
2810
2840
2840
1690
1690
1/3
1/3
F2 [N] 1)
Bracket 4) HUS 12,5 3)
2440
2440
3190
3050
2840
2840
1700
1700
3190
3050
2840
2840
2840
2840
1700
1700
3190
3050
2840
2840
3190
3050
2840
2840
1690
1690
F3 [N] 1)
Bracket 4) HUS 12,5 3)
2130
2030
2130
2030
1890
1890
1130
1130
2120
2030
1890
1890
1890
1890
1130
1130
2120
2030
1890
1890
2120
2030
1890
1890
1120
1120
Loading capacity of bracket (steel loading capacity) or with HVZ M12 fastening, the loading capacity of the bracket is reached with the HVZ M12.
Loading capacity of bracket fastened with HST M12.
3)
Loading capacity of bracket fastened with HUS H 12.5 or with HST M10 (bending figures for HST M10 taken into account)
4)
Loading capacity of bracket (steel loading capacity) or with HVZ M12 or HST M12 fastening (loading capacity of the bracket is reached with HVZM12/HSTM12)
5)
Short angle brace: MQK-SK / long angle brace: MQK-SL
1)
1050
500
1460
970
720
420
1460
970
720
1470
580
1370
1020
1460
970
720
580
System MQ
Medium duty
1050
500
2950
1960
1470
580
3320
2200
1640
1470
580
3180
2380
3010
2000
1490
1400
System MQ
Medium duty
HDG
1050
500
2950
1960
1470
580
4070
2710
2020
1470
580
6040
4520
3010
2000
1490
2560
System MM
Light duty
Medium duty
HVZ M121) HST M122) HUS 12,53) HVZ M121) HST M122) HUS 12,53) HVZ M121) HST M122) HUS 12,53) HVZ M121) HST M122) HUS 12,53) HVZ M121) HST M122) HUS12,53)
System MQ
Medium duty
Stainless Steel
300
450
300
450
600
1000
300
450
600
600
1000
450
600
300
450
600
1000
Type of load 3
F1
System MI
HDG
Bracket
MQK-21/300
MQK-21/450
MQK-41/300
MQK-41/450
MQK-41/600
MQK-41/1000
MQK-41/3/300
MQK-41/3/450
MQK-41/3/600
MQK-41/600/4
MQK-41/1000/4
MQK-72/450
MQK-72/600
MQK-21 D/300
MQK-21 D/450
MQK-21 D/600
MQK-41 D/1000
Channel
L (mm)
F1
PC Software
and Technical
Information
System MQ
Firestop systems
System MQ
Airconditioning
and Ventilation
System MQ
Fixed points
and sliders
2)
page 47
page 4
IS-HN-D1278-2015
686
System MQ
PC Software
and Technical
Information
System MM
Light duty
Medium duty
System MQ
Medium duty
to approx 20 microns
100
100
2
63x13.5
20.6
System MQ
Medium duty
HDG
21
21
21
31
31
41
41
41
52
52
72
72
41
2
2
2
2
2
2
2
2
2.5
2.5
2.75
2.75
3
3
6
6
3
6
3
6
6
6
6
6
6
6
1.438
1.438
1.438
1.759
1.759
2.080
2.080
2.080
2.942
2.942
4.101
4.101
2.910
MQ-21 3 m
MQ-21 6 m
MQ-21 6 m
MQ-31 3 m
MQ-31 6 m
MQ-41 3 m
MQ-41 6 m
MQ-41 6 m
MQ-52 6 m
MQ-52 6 m
MQ-72 6 m
MQ-72 6 m
MQ-41/3 6 m
369584
369585
236647*
369589
369590
369591
369592
236645*
369598
430797*
369599
430801*
369597
System MQ
Medium duty
Stainless Steel
and
63x13.5
7.5
22.3
41.3
7.5
41.3
100
100
2.5
63x13.5
41.3
63x13.5
52
22.3
7.5
22.3
41.3
7.5
41.3
100
100
3
2.75
63x13.5
41.3
72
* Please check the availability with Hilti logistic department (available in GCC)
Channels
22.3
31
22.3
63x13.5
restop tested
22.3
7.5
41.3
7.5
41.3
System MI
HDG
75
75
41.2
System MQ
Fixed points
and sliders
41
82
124
124
2
2
2.5/2.75
3
6
6
6
6
2.904
4.188
7.078
9.841
MQ-21 D 6 m
MQ-41 D 6 m
MQ-52-72 D 6 m
MQ-124X D 6 m
40x13.5
369602
369604
369605
369606
22.3
82.6
40x13.5
7.5
41.3
22.3
7.5
41.3
75
2.5
124
40x13.5
2.75
System MQ
Airconditioning
and Ventilation
22.3
7.5
41.3
Channels
and
restop tested
Firestop systems
124 3
7.5
41.3
page 48
IS-HN-D1278-2015
687
System MQ
PC Software
and Technical
Information
System MM
Light duty
Medium duty
System MQ
Medium duty
System MQ
Medium duty
HDG
System MQ
Medium duty
Stainless Steel
System MI
HDG
System MQ
Fixed points
and sliders
System MQ
Airconditioning
and Ventilation
Firestop systems
IS-HN-D1278-2015
688
page 50
PC Software
and Technical
Information
Channel nut
System MM
Light duty
Medium duty
Features
Simple, compact, time saving
Single part
Easy to use
Universal: one and the same nut for all channels
Simple removal
Technical data
Galvanising:
System MQ
Medium duty
galvanised, Fe/Zn 13 B
as per DIN 50961
Connection
thread
Weight each
(g)
Packaging contents
(pcs)
Ordering
designation
Item no.
M10
66
50
300
MQN
369623
Item
Tightening torque,
MD (Nm)
MQN
Channel I:
Channel II:
5.0
8.0
5.0 1)
40
MQ-21. MQ-31, MQ-41, MQ-21D, MQ-41D
MQ-41/3, MQ-52, MQ-72, MQ-52-72D, MQ-124XD
Put in position.
System MI
HDG
System MQ
Medium duty
Stainless Steel
Shear loading applies to single fastening. Qrec (kN) 9.0 for two fastenings
Tighten.
Wing nut
M6
QStE 380 TM, SEW 92
QStE 32-2 KGK as per DIN 1654
PA
Connection
thread
Weight each
(g)
Packaging contents
(pcs)
M 6
M 8
M10
M12
21
21
21
33
50
50
50
50
800
800
800
800
Item
MQM-M 6
MQM-M 8
MQM-M10
MQM-M12
Channel I:
Channel II:
3.0
3.0
1.5
10
5.0
5.0
3.5
20
5.0
8.0
5.0
40
5.0
8.0
5.0
40
MQ-21, MQ-31, MQ-41, MQ-21D, MQ-41D
MQ-41/3, MQ-52, MQ-72, MQ-52-72D, MQ-124XD
Item no.
MQM-M6
MQM-M8
MQM-M10
MQM-M12
369624
369698
369626
369627
M12
Tightening torque,
MD (Nm)
Firestop systems
Ordering
designation
System MQ
Fixed points
and sliders
M8
M10
Nut, M6M10:
Nut, M12:
Plastic:
System MQ
Airconditioning
and Ventilation
1)
System MQ
Medium duty
HDG
Bolt:
Width across flats:
Nut:
Plate:
Pushbutton
page
page51
7
IS-HN-D1278-2015
689
System MQ
PC Software
and Technical
Information
System MM
Light duty
Medium duty
System MQ
Medium duty
System MQ
Medium duty
HDG
System MQ
Medium duty
Stainless Steel
System MI
HDG
System MQ
Fixed points
and sliders
System MQ
Airconditioning
and Ventilation
Firestop systems
IS-HN-D1278-2015
690
page 52
System MQ
Features
Universal: few parts for all applications
Easy to use
Three-dimensional, thus high strength
System MM
Light duty
Medium duty
10
System MQ
Medium duty
Technical data
Material:
Material thickness
Galvanising:
19
19.4
35
PC Software
and Technical
Information
Weight each
(g)
Packaging )
contents (pcs)
200
20
Frec
Ordering
designation
4.0 kN
Frec
System MQ
Medium duty
HDG
40 Nm
3 mm
M10 material 8.8 as per DIN/ISO 898
17 mm
3.0 kN
Item no.
MQW-Q2
369655
1
Tighten.
Firestop systems
System MQ
Airconditioning
and Ventilation
System MQ
Fixed points
and sliders
System MI
HDG
90 angle
56
System MQ
Medium duty
Stainless Steel
Technical data
Tightening torque:
Material thickness:
Bolt:
Width across flats:
56
Features
Pre-assembled for rapid installation
Reliable keying action
High strength
page 53
page 10
IS-HN-D1278-2015
691
System MQ
PC Software
and Technical
Information
90 angle
Angle, 4 hole, 90
Angle, 8 hole, 90
Angle, 3 hole, 90
Angle, 2 hole, 90
Weight each
(g)
Packaging
contents (pcs)
Ordering
designation
Item no.
220
420
160
160
10
10
20
10
MQW-4
MQW-8/90
MQW-3
MQW-P2
369658
369659
369656
369661
5.0 kN
Frec
3.7 kN
Frec
9.0 kN
Frec
5.0 kN
Frec
6.8 kN
Frec
2.5 kN
55
System MM
Light duty
Medium duty
Frec
105
System MQ
Medium duty
61
111
46
System MQ
Medium duty
HDG
46
45 angle
System MQ
Medium duty
Stainless Steel
105
Angle, 8 hole, 45
Angle, 3 hole, 45
Angle, 2 hole, 45, inner
Weight each
(g)
Packaging
contents (pcs)
410
155
354
10
20
10
Ordering
designation
MQW-8/45
MQW-3/45
MQW-2/45
Frec
9.0 kN
Frec
5.0 kN
Frec
7.0 kN
Frec
2.5 kN
Frec
3.0 kN
Frec
1.1 kN
Frec
4.5 kN
Frec
3.0 kN
45
Item no.
369660
369657
369662
System MI
HDG
106
45
56
System MQ
Fixed points
and sliders
100
45
100
System MQ
Airconditioning
and Ventilation
135 angle
Firestop systems
Weight each
(g)
Packaging
contents (pcs)
Ordering
designation
Item no.
210
10
MQW-3/135
369663
85
45
55
page 54
page 11
IS-HN-D1278-2015
692
Firestop systems
System MQ
Airconditioning
and Ventilation
System MQ
Fixed points
and sliders
System MI
HDG
System MQ
Medium duty
Stainless Steel
System MQ
Medium duty
HDG
System MQ
Medium duty
System MM
Light duty
Medium duty
PC Software
and Technical
Information
System MQ
page 55
IS-HN-D1278-2015
693
System MQ
PC Software
and Technical
Information
System MM
Light duty
Medium duty
System MQ
Medium duty
System MQ
Medium duty
HDG
System MQ
Medium duty
Stainless Steel
System MI
HDG
System MQ
Fixed points
and sliders
System MQ
Airconditioning
and Ventilation
Firestop systems
IS-HN-D1278-2015
694
page 56
System MQ
Features
Reliable and easy to use
Connection of channels to any base material
19
19.4
10
System MM
Light duty
Medium duty
35
PC Software
and Technical
Information
Technical data
M at er i al :
Galvanising:
MQV-2/2D-14
Frec
( k N)
7.8
8.4
Channel
( B)
MQ-41
MQ-21D
Bolt
( A)
Pushbutton
Tightening torque,
M D (Nm)
10
20
Double
MQN
Quadruple MQN
MQV-2/2D-14
MQP-1/1
MQP-1/3
MQP-2/3
MQP-2/1
Frec
I t em n o .
369639
369646
369647
369648
377731
40
40
Frec
112
9.0 kN
20
10
10
Or d er i n g
d esi g n at i o n
5.0 kN
System MQ
Medium duty
HDG
I t em
438
110
190
290
135
112
Packag i n g
co n t en t s ( p cs)
18x12
3x
14x19
61
118
59
80
61
40
52
60
System MQ
Medium duty
Stainless Steel
W ei g h t each
( g)
167
32
5
11,5 x 30
44
54
59
System MI
HDG
34
11.5
W ei g h t each
( g)
350
10
Packag i n g
co n t en t s ( p cs)
Or d er i n g
d esi g n at i o n
MQP-45
I t em n o .
Frec
369649
7.0 kN
Frec
5.0 kN
105
45
40x40x4
14
42
Firestop systems
System MQ
Airconditioning
and Ventilation
41
System MQ
Fixed points
and sliders
Su i t ab l e f o r
ch an n el
System MQ
Medium duty
S 2 3 5 JR as p er DI N EN 10 0 2 5
galvanised Fe/Zn 13 B
as per DIN 50961
Separate design verication of the fastening on the base material must
be provided.
page 57
page 14
IS-HN-D1278-2015
695
Frec.
Frec.
Retaining joint
straps
for beam clamps
Universal
MQP-U
glavanised, 5 m
Approval
Dimensions [mm]
L
B
l1
l2
d1
Universal fastening on inclined
components.
MAB-11/-13
VdS
350
25
14.8
19
10.5
Direct connection on the building structure and on installation
MAB-17
VdS
400
40
14.5
22
channels, especially suitable for bracings.
Angle stepless fixable up to 90.
Installation instruction: retaining strap
Easy handling and height adjustment of the threaded rod.
d2
12.5
17
12.5
Packaging
contents (pcs)
12
12
Outside packaging
contents
120
48
Ordering
designation
Item no.
MAB-S 11/ 13
MAB-S 17
374409
228156
l2
3
Technical data:
Material:
Material thickness:
Galvanising:
d2
l1
d1
System MQ
Medium duty
rec.
M16channels, especially
16.5
16.5 for bracings.
390
10
suitable
Angle stepless fixable up to 90.
ItemEasy handling and height adjustment
Max. rec. load
Ordering
designation
Item no.
MQP-U M12
MQP-U M16
284248
284249
Tightening torque MD
(Nm)
(kN)
MQP-U M12
14
20
Technical
data:
MQP-U M16
14
20
Material:
S235 JRG-2 as per DIN EN 10025
Material thickness:
5 mm
Technical
data for fastening the MQP-U
universal
to BMQ channels
Galvanising:
galvanised,
Fe joint
/ Zn 13
as per DIN 50961
Separate
design verification
of the fastening
base material
Angle
Max. recommended
load Frec (kN)on the Tightening
torque or other
Channel I
Channel II
MD (Nm)
installation components
must be
provided.
90
5.0
8.0
20
60
4.0
8.0
20
30
3.0
5.0
20
0
3.0
5.0
20
Universal
joint
MQP-U
Channel I: MQ-21, MQ-31, MQ-41, MQ-21D, MQ-41D
Channel II: MQ-41/3, MQ-52, MQ-72, MQ-52-72 D, MQ-124XD
Interim valuesD1of the angleD2can be interpolated
linearly.
Size
Weight
Packaging
Ordering
M12
M16
page 18
System MQ
Medium duty
HDG
Packaging
(mm)
(mm)
each (g)
contents (pcs)
designation
12.5
16.5
12.5
16.5
390
390
10
10
MQP-U M12
MQP-U M16
Item
Tightening torque MD
(Nm)
MQP-U M12
MQP-U M16
14
14
20
20
System MQ
Medium duty
Stainless Steel
Weight
FF
empf
rec
Winkel
variable
variabel
angle
System MI
HDG
D2
Item no.
284248
284249
System MQ
Fixed points
and sliders
D1
(mm)
(mm)
each (g)
contents (pcs)
Universal fastening
on inclined
components.
M12
12.5 on the12.5
390 and on 10
Direct connection
building structure
installation
Universal
Universal joint
joint MQP-U
MQP-U
Features:
Size
Tightening torque
MD (Nm)
FF
empf
rec
90
5.0
8.0
20
60
4.0
8.0
20
30
3.0
5.0
20
0
3.0
5.0
20
Channel I: MQ-21, MQ-31, MQ-41, MQ-21D, MQ-41D
Channel II: MQ-41/3, MQ-52, MQ-72, MQ-52-72 D, MQ-124XD
Interim values of the angle can be interpolated linearly.
Winkel
variable
variabel
angle
Firestop systems
System MQ
Airconditioning
and Ventilation
page 61
page 18
IS-HN-D1278-2015
System MM
Light duty
Medium duty
Features:
For
clamp
PC Software
and Technical
Information
System MQ
696
Firestop systems
System MQ
Airconditioning
and Ventilation
System MQ
Fixed points
and sliders
System MI
HDG
System MQ
Medium duty
Stainless Steel
System MQ
Medium duty
HDG
System MQ
Medium duty
System MM
Light duty
Medium duty
PC Software
and Technical
Information
System MQ
page 65
IS-HN-D1278-2015
697
System MQ
PC Software
and Technical
Information
3D system
Features
Universal: few parts for all applications
For installation of angles or connectors on site
Quick and easy to use
45 angle and bracing with predetermined bending point
35
System MM
Light duty
Medium duty
Technical data
Material:
Material thickness
Galvanising:
System MQ
Medium duty
Bolt:
Width across flats:
Tigthening torque:
19
19.4
10
3D system
90
Supported at both ends
206
212
153
95
20
20
16
20
Item no.
MQ3D-B
MQ3D-W90
MQ3D-W45
MQ3D-A
369694
369695
369696
369697
Frec = 2.5 kN
21.5
Tension/compression bracing
61
Frec = 2.5 kN
Variable angle
bo
at
or
te
pp
System MQ
Medium duty
HDG
Example of application
ds
Basic unit
90 angle
45 angle
Brace
Ordering
designation
en
Packaging contents
(pcs)
th
Weight each
(g)
Su
Description
26
Directly on channel
System MQ
Medium duty
Stainless Steel
50
Frec = 2.5 kN
Variable angle
45
30
System MI
HDG
Tension bracing
Frec = 2.5 kN
Frec Qrec MQN
with MQ3D-B
50
Variable
angle
45
System MQ
Fixed points
and sliders
25
Directly on channel
Frec Qrec MQM-M10
fastened to channel with
MQZ-L11 boss plate
M10x20-8.8 hex. screw
MQM-M10 wing nut
Frec = 2.5 kN
Variable angle
System MQ
Airconditioning
and Ventilation
Firestop systems
Note
The preassembled fastening screw must be replaced
with a longer 8.8 grade M10 screw when the connecting parts (MQ3D-W90, MQ3D-W45, MQ3DA) are fitted without other parts from the 3D system.
The minimum thread engagement lengths must be
observed.
page 66
page 25
IS-HN-D1278-2015
698
System MQ
PC Software
and Technical
Information
Angle
Technical data
nn 90 connection of MQ channels
MP-MQE-W
Material composition
Surface Finish
Galvanized
Advantages
)UHF
N1
)UHF
N1
System MQ
Medium duty
HDG
nn Pre-galvanized
System MQ
Medium duty
Stainless Steel
N1
)UHF
N1
System MI
HDG
)UHF
System MQ
Fixed points
and sliders
2
3
Weight
Thickness
Tightening torque
Sales Quantity
Item Number
94 g
3 mm
40 Nm
20 PC
02022804
113 g
4 mm
40 Nm
10 PC
02022805
324 g
4 mm
40 Nm
10 PC
02022806
Firestop systems
Order designation
1
System MQ
Airconditioning
and Ventilation
Applications
System MQ
Medium duty
System MM
Light duty
Medium duty
MP-MQE-W
page 67
IS-HN-D1278-2015
699
System MQ
PC Software
and Technical
Information
Rail support
MP-MQE-P
System MM
Light duty
Medium duty
System MQ
Medium duty
Applications
Technical data
MP-MQE-P
Material composition
Surface Finish
Advantages
Galvanized
Use with 2pc. wing nuts MQMM10 and 2pc. bolts M10x25
grade 8.8
$
System MQ
Medium duty
HDG
[
System MQ
Medium duty
Stainless Steel
)UHF
N1
Order designation
Weight
Thickness
Tightening torque
Sales Quantity
Item Number
979 g
4 mm
40 Nm
12 PC
02022807
System MI
HDG
System MQ
Fixed points
and sliders
System MQ
Airconditioning
and Ventilation
Firestop systems
page 68
IS-HN-D1278-2015
700
PC Software
and Technical
Information
System MQ
Medium duty
Technical data
Material:
Galvanizing:
System MM
Light duty
Medium duty
Advantages
Easy, secure attachment of installation channels with pushbuttons
Quick installation of the wall base on any base material
Elongated holes for flexible positioning to avoid rebar hits
Various channel lengths for great versatility
Flexible position of the wall base
Ordering designation
Package contents
Weight
Item no.
1.000g
387734
189
recommended load F
for L = 1442 mm
0.90 kN
1.18 kN
0.52 kN
0.69 kN
0.39 kN
0.49 kN
0.88 kN
1.5 kN*
0.88 kN/m
1.31 kN/m
1.05 m
Channel position
System MI
HDG
Loading scenario
Channel MQ-21D
System MQ
Medium duty
Stainless Steel
recommended load F
for L = 1642 mm
System MQ
Medium duty
HDG
205
Type of load
62
recommended load F
for L = 1642 mm
recommended load F
for L = 1442 mm
1.61 kN
2.10 kN
0.94 kN
1.23 kN
0.67 kN
0.88 kN
1.55 kN
2.64 kN
1.57 kN/m
2.33 kN/m
1.05 m
Firestop systems
Channel position
System MQ
Airconditioning
and Ventilation
Loading scenario
Channel MQ-21D
System MQ
Fixed points
and sliders
Type of load
page 69
IS-HN-D1278-2015
701
IS-HN-D1278-2015
702
MC-3D-41 OC-A 6m
2063241 M10x65-F
M10x20-F
M12x105-F
2063742 MC-WN-3D OC
Channel nuts
MC-WN-M10 OC
MC-CB OC-A
Base connector
2063297
MC-3D-41 OC-A 3m
Channels
MC-B-3D-41/350 OC-A
2063242 M10-SL-F
Accessories
382897
2063245 A 10,5/28-F
Channel screws
2063723
MC-B-3D-41/1000 OC-A
Channel Connectors
2063722
MC-B-3D-41/650 OC-A
Brackets
Angles
MIA-EH-P
304891
304887
2063224
MI accessories
2063283 MIA-EH90
369685
369686
2063740
Channel plate
MC-MI connector
End Cap
MQZ-E41
2063760 MQZ-E31
Channel stiffener
2063730
Longitudional connector
Installation System
MC-3D Hot-dip-galvanized
MC Installation system
Coating
Height
Length
Material
thickness
weight
41 mm
3m
1,6 mm
1713 g/m
MC-3D-41 OC-A 3m
2063297
41 mm
6m
1,6 mm
1713 g/m
MC-3D-41 OC-A 6m
2063296
Designation
Article number
Coating
Height
Length
Material
thickness
weight
72 mm
6m
2,75 mm
4108 g/m
Designation
MC-72 OC-A 6m
IS-HN-D1278-2015
Article number
2063299
703
MC Installation system
IS-HN-D1278-2015
704
MC Installation system
Coating
Designation
Article
number
Profile
Length, L
weight
Packaging
MC-3D-41
350 mm
1033 g
12 pc
MC-B-3D-41/350 OC-A
2063720
MC-3D-41
450 mm
1242 g
12 pc
MC-B-3D-41/450 OC-A
2063721
MC-3D-41
650 mm
1508 g
12 pc
MC-B-3D-41/650 OC-A
2063722
MC-3D-41
1000 mm
2150 g
12 pc
MC-B-3D-41/1000 OC-A
2063723
Coating
Length
L
Height
H
Dimens.
A
Material
thick.
weight
Pack.
Designation
Article
number
322 mm
97 mm
50 mm
1,5 mm
557 g
12 pc
MC-BE-320 OC-A
2063729
632 mm
147 mm
100 mm
1,5 mm
1138 g
12 pc
MC-BE-630 OC-A
2063730
IS-HN-D1278-2015
705
MC Installation system
*Loading capacity of bracket fastened with HST-R M12 or HUS-HR 10 with hef min. 70 mm.
Loading capacity calculated according EN 1993-1-3
Load values are only valid for concrete C20/25
The self-weight of the bracket has been taken into account.
The loads apply only if the bracket fastening is away from a building component edge (fastenings at building component edges must be
verified separately).
The transfer of forces into the respective base material (steel, concrete) must be verified separately.
The guidelines for use / application of anchors in anchor approvals must be observed. Load values according approvals status July 2012.
The deflection of max L/150 was observed in all cases and measured at the end of the bracket.
IS-HN-D1278-2015
706
MC Installation system
Coating
Material
thickness
weight
Pack.
4,0 mm
708 g
20 pc
Designation
MC-CL OC-A
MC-3D-41 + MC-WN-M10
MC-3D-41 + MC-SI-M10
+/-Fx, kN
7,2
6,5
+/-Fz, kN
1,5
1,5
My, kNcm
16,0
10,0
MC-72 + MC-WN-M10
MC-72 + MC-S-M10
+/-Fx, kN
7,2
2,9
+/-Fz, kN
6,0
3,8
My, kNcm
56,0
30,0
Article number
2063760
Given loads are max recommended loads for symmetrical load distribution in one direction only!
For design with load combinations and assymetrical load use Profis Installation Software.
IS-HN-D1278-2015
707
MC Installation system
Coating
weight
Pack.
925 g
12 pc
Designation
Article number
MC-CB OC-A
2061833
MC-3D-41 + MC-WN-M10
MC-3D-41 + MC-SI-M10
MC-3D-41+M10x65+MC-PI
+Fx, kN
7,2
6,5
13,0
-Fx, kN
7,2
8,7
17,4
Given loads are max recommended loads for symmetrical load distribution in one direction only!
For design with load combinations and assymetrical load use Profis Installation Software.
IS-HN-D1278-2015
708
MC Installation system
Coating
weight
Pack.
324 g
10 pc
Designation
MC-A-90 OC-A
MC-3D-41 + MC-WN-M10
MC-3D-41 + MC-SI-M10
+Fz, kN
4,0
4,3
-Fz, kN
3,0
1,4
Article number
2063770
Given loads are max recommended loads for symmetrical load distribution in one direction only!
For design with load combinations and assymetrical load use Profis Installation Software.
IS-HN-D1278-2015
709
MC Installation system
Coating
weight
Pack.
174g
20 pc
Designation
Article number
MC-AH-90 OC-A
2063733
MC-3D-41 + MC-WN-M10
MC-3D-41 + MC-SI-M10
3,0
3,0
+/-Fz, kN
Given loads are max recommended loads for symmetrical load distribution in one direction only!
For design with load combinations and assymetrical load use Profis Installation Software.
IS-HN-D1278-2015
710
MC Installation system
Coating
weight
Pack.
MI-90 / 120
MIA-EH-90 / 120
MIA-EH-P
223 g
10 pc
Designation
Article number
MC-MI-AH-90 OC-A
2063283
MC-3D-41 + MC-WN-M10
MC-3D-41 + MC-SI-M10
+Fz, kN
4,5
4,5
-Fz, kN
2,9
1,4
Given loads are max recommended loads for symmetrical load distribution in one direction only!
For design with load combinations and assymetrical load use Profis Installation Software.
IS-HN-D1278-2015
711
MC Installation system
Coating
weight
Pack.
128g
20 pc
Designation
Article number
MC-AF-90 OC-A
2063740
Double MC-AF-90
+/-Fz, kN
MC-3D-41+M10x65+MC-PI
MC-3D-41 + MC-SI-M10
3,0
3,0
Given loads are max recommended loads for symmetrical load distribution in one direction only!
For design with load combinations and assymetrical load use Profis Installation Software.
IS-HN-D1278-2015
10
712
MC Installation system
Coating
Use with
weight
Pack.
MC-WN-M10
MC-S-M10
710 g
20 pc
Designation
MC-CH OC-A
Article number
2063281
MC-3D-41 + MC-WN-M10
+/-Fx, kN
7,2
Given loads are max recommended loads for symmetrical load distribution in one direction only!
For design with load combinations and assymetrical load use Profis Installation Software.
IS-HN-D1278-2015
11
713
MC Installation system
Coating
weight
Pack.
338 g
12 pc
Designation
Article number
MC-CU OC-A
2063762
2x M10x65 at 90
MC-3D-41 + MC-WN-M10
MC-3D-41 + MC-SI-M10
HSA-R M12/HUS-HR 10
+/-Fx, kN
8,4
2,9
8,8
+/-Fz, kN
5,4
3,4
5,4
MC-3D-41 + MC-WN-M10
MC-3D-41 + MC-SI-M10
HSA-R M12/HUS-HR 10
3,2
2,1
3,2
1x M10x65 at 0 to 180
+/-F 0-180, kN
Given loads are max recommended loads for symmetrical load distribution in one direction only!
For design with load combinations and assymetrical load use Profis Installation Software.
IS-HN-D1278-2015
12
714
MC Installation system
QSTE 380 TM
Coating
Connection
thread
Install
Torque
weight
Pack.
M10
40 Nm
22 g
50 pc
Designation
MC-WN-M10 OC
Shear capacity, kN
Tension capacity, kN
4,0
4,2
MC-3D-41
Article
number
2063742
QSTE 380 TM
Coating
Connection
thread
Install
Torque
weight
Pack.
Designation
M10
40 Nm
41 g
25 pc
MC-WN-3D OC
IS-HN-D1278-2015
Article
number
2063735
13
715
MC Installation system
Coating
weight
Pack.
13 mm
53 g
100 pc
Designation
MC-PU OC-A
Article number
2063224
Coating
weight
Pack.
Designation
M10
17 g
100 pc
MC-SI-M10 OC-A
Article number
2063739
Coating
weight
Pack.
M10
47 g
100 pc
Designation
MC-S-M10 OC-A
IS-HN-D1278-2015
Article number
2063737
14
716
MC Installation system
Coating
weight
Pack.
M10
20 g
100 pc
Designation
M10x20-F
Article number
2063241
Coating
weight
Pack.
M10
45 g
100 pc
M12
105 g
50 pc
Designation
Article number
M10x65-F
2063242
M12x105-F
2063244
Steel grade 8
Coating
weight
Pack.
M10
15 g
100 pc
Designation
M10-SL-F
Article number
2063245
Steel 140 HV
Coating
Pack.
8g
100 pc
Designation
A10,5/28-F
IS-HN-D1278-2015
Article number
2063247
15
717
MC Installation system
Coating
weight
Pack.
MC-3D-41
M10x65
20 g
50 pc
Designation
MC-PI OC-A
IS-HN-D1278-2015
Article number
2063718
16
718
IS-HN-D1278-2015
719
Anchor Systems
Stud Anchor
HST
High performance expansion anchor with unique wedge design for use in cracked and non-cracked concrete (galvanized
version).
Fields of Application
nn Through fastener for wood angles channels and columns in concrete and hard stone
Base Material
Ordering
Drill bit
diameter
Hole depth
Thickness
fastened
- max
Carbon Steel
Order designation
Item No.
Minimum
order
quantity
Stainless Steel
Order designation
Item No.
Minimum
order
quantity
8 mm
65 mm
10 mm
HST M8x75/10
00371581
100 pc
HST-R M8x75/10
00435447
8 mm
65 mm
30 mm
HST M8x95/30
00295378
80 pc
HST-R M8x95/30
00435448
50 pc
8 mm
65 mm
50 mm
HST M8x115/50
00371583
50 pc
HST-R M8x115/50
00435449
50 pc
50 pc
10 mm
80 mm
10 mm
HST M10x90/10
00371584
50 pc
HST-R M10x90/10
00435450
50 pc
10 mm
80 mm
30 mm
HST M10x110/30
00295367
40 pc
HST-R M10x110/30
00435451
40 pc
10 mm
80 mm
50 mm
HST M10x130/50
00371586
25 pc
HST-R M10x130/50
00435452
25 pc
10 mm
80 mm
80 mm
HST-R M10x160/80
00435453
25 pc
12 mm
95 mm
20 mm
HST M12x115/20
00371587
25 pc
HST-R M12x115/20
00435454
25 pc
12 mm
95 mm
50 mm
HST M12x145/50
00371588
25 pc
HST-R M12x145/50
00435455
25 pc
12 mm
95 mm
90 mm
HST M12x185/90
00384582
25 pc
HST-R M12x185/90
00435456
25 pc
25 pc
12 mm
95 mm
120 mm
HST M12X215/120
00371590
25 pc
HST-R M12x215/120
00435457
12 mm
95 mm
140 mm
HST M12X235/140
00371591
25 pc
12 mm
95 mm
160 mm
HST M12X255/160
00371592
25 pc
16 mm
115 mm
25 mm
HST M16X140/25
00371593
12 pc
HST-R M16X140/25
00376051
12 pc
16 mm
115 mm
50 mm
HST M16X165/50
00371594
12 pc
HST-R M16X165/50
00376052
12 pc
287
07
Anchor Systems
IS-HN-D1278-2015
www.hilti.com
720
Anchor Systems
Ordering
Drill bit
diameter
16 mm
16 mm
Carbon Steel
Hole depth
Thickness
fastened
- max
Order designation
115 mm
100 mm
HST M16X215/100
115 mm
140 mm
HST M16X255/140
Stainless Steel
Item No.
Minimum
order
quantity
00371595
12 pc
HST-R M16X215/100
00376053
12 pc
00371596
12 pc
HST-R M16X255/140
00376054
12 pc
Order designation
Minimum
order
quantity
Item No.
16 mm
115 mm
180 mm
HST M16X295/180
00371597
12 pc
HST-R M16X295/180
00376055
12 pc
20 mm
140 mm
30 mm
HST-R M20X170/30
00371598
5 pc
HST-R M20X170/30
00376056
5 pc
20 mm
140 mm
60 mm
HST-R M20X200/60
00371599
5 pc
HST-R M20X200/60
00376057
5 pc
20 mm
140 mm
120 mm
HST M20x260/120
00274697
5 pc
24 mm
170 mm
10 mm
HST M24X200/30
00371601
5 pc
HST-R M24X200/30
00376058
5 pc
24 mm
170 mm
20 mm
HST M24X230/60
00371602
5 pc
HST-R M24X230/60
00376059
5 pc
Ordering
Material: Stainless steel (HCR high corrosion resistant material as per DIN 1.4529)
Drill bit diameter
Anchor Length
Thickness
fastened
- max
Minimum order
quantity
Order designation
Item No.
8 mm
75 mm
10 mm
25 pc
HST-HCR M 8x75
00376060
8 mm
95 mm
30 mm
25 pc
HST-HCR M 8x95
00376061
8 mm
115 mm
50 mm
25 pc
HST-HCR M 8x115
00376062
10 mm
90 mm
10 mm
30 pc
HST-HCR M 10x90
00376063
10 mm
110 mm
30 mm
30 pc
HST-HCR M 10x110
00376064
10 mm
130 mm
50 mm
30 pc
HST-HCR M 10x130
00376065
12 mm
115 mm
20 mm
35 pc
HST-HCR M 12x115
00376066
12 mm
145 mm
50 mm
35 pc
HST-HCR M 12x145
00376067
12 mm
185 mm
90 mm
35 pc
HST-HCR M 12x185
00376068
12 mm
215 mm
120 mm
35 pc
HST-HCR M 12x215
00376069
16 mm
140 mm
25 mm
55 pc
HST-HCR M 16x140
00376070
16 mm
165 mm
50 mm
80 pc
HST-HCR M 16x165
00376071
16 mm
215 mm
100 mm
130 pc
HST-HCR M 16x215
00376072
16 mm
255 mm
140 mm
HST-HCR M 16x255
00376073
16 mm
295 mm
180 mm
HST-HCR M 16x295
00376074
www.hilti.com
IS-HN-D1278-2015
07 Anchor Systems
721
288
Benefits
HST
Carbon steel
HST-R
Stainless steel
HST-HCR
High corrosion
resistance steel
Concrete
Tensile
zone
Fire
resistance
Shock
Seismic
Corrosion
resistance
High
corrosion
resistance
European
Technical
Approval
CE
conformity
PROFIS
Anchor
design
software
Approvals / certificates
Description
Authority / Laboratory
a)
European technical approval
DIBt, Berlin
Shockproof fastenings in civil
Federal Office for Cicil Protection,
defence installations
Bern
Fire test report
DIBt, Berlin
Fire test report ZTV-Tunnel
IBMB, Braunschweig
Assessment report (fire)
warringtonfire
a) All data given in this section according ETA-98/0001, issue 2011-06-17.
130
10 / 2012
IS-HN-D1278-2015
722
M8
Non-cracked concrete
M10 M12 M16 M20 M24
M8
Cracked concrete
M10 M12 M16 M20 M24
[kN]
[kN]
[kN]
16,6
18,1
15,2
22,3
26,7
22,7
35,2
35,1
32,4
48,7
49,8
45,5
76,0
77,4
-
86,1
79,1
-
10,3
12,7
13,8
11,6
18,4
16,2
21,9
20,1
21,5
31,1
36,0
32,4
44,9
55,1
-
[kN]
[kN]
[kN]
17,6
15,8
17,6
27,8
24,4
27,8
40,5
35,4
40,5
67,8
61,2
75,4
102,9 112,3
95,6 137,7
-
17,6
15,8
17,6
27,8
24,4
27,8
40,5
35,4
40,5
67,8
61,2
75,4
102,9 112,3
95,6 137,7
-
M8
Non-cracked concrete
M10 M12 M16 M20 M24
M8
Cracked concrete
M10 M12 M16 M20 M24
[kN]
[kN]
[kN]
9,0
9,0
9,0
16,0
16,0
16,0
20,0
20,0
20,0
35,0
35,0
35,0
50,0
50,0
-
60,0
60,0
-
5,0
5,0
5,0
9,0
9,0
9,0
12,0
12,0
12,0
20,0
25,0
25,0
30,0
30,0
-
40,0
40,0
-
[kN]
[kN]
[kN]
14,0
13,0
13,0
23,5
20,0
20,0
35,0
30,0
30,0
55,0
50,0
55,0
84,0
80,0
-
94,0
115,0
-
14,0
13,0
13,0
23,5
20,0
20,0
35,0
30,0
30,0
55,0
50,0
53,5
84,0
80,0
-
94,0
115,0
-
M8
Non-cracked concrete
M10 M12 M16 M20 M24
M8
Cracked concrete
M10 M12 M16 M20 M24
[kN]
5,0
6,0
6,0
10,7
10,7
10,7
13,3
13,3
13,3
23,3
23,3
23,3
33,3
33,3
-
40,0
40,0
-
2,8
3,3
3,3
6,0
6,0
6,0
8,0
8,0
8,0
13,3
16,7
16,7
20,0
20,0
-
26,7
26,7
-
[kN]
[kN]
[kN]
11,2
10,4
10,4
18,8
16,0
16,0
28,0
24,0
24,0
44,0
38,5
44,0
67,2
55,6
-
62,7
79,9
-
11,2
10,4
10,4
18,8
16,0
16,0
28,0
24,0
24,0
44,0
35,6
35,6
60,9
55,6
-
62,7
79,9
-
60,2
70,5
-
Characteristic resistance
Anchor size
Tensile NRk
HST
HST-R
HST-HCR
Shear VRk
HST
HST-R
HST-HCR
Design resistance
Anchor size
Tensile NRd
HST
HST-R
HST-HCR
Shear VRd
HST
HST-R
HST-HCR
[kN]
Recommended loads
Non-cracked concrete
M10 M12 M16 M20 M24
Cracked concrete
M10 M12 M16 M20 M24
Anchor size
M8
M8
a)
Tensile Nrec
HST
[kN]
3,6 7,6 9,5 16,7 23,8 28,6 2,0 4,3 5,7 9,5 14,3 19,0
HST-R
[kN]
4,3 7,6 9,5 16,7 23,8 28,6 2,4 4,3 5,7 11,9 14,3 19,0
HST-HCR
[kN]
4,3 7,6 9,5 16,7
2,4 4,3 5,7 11,9
a)
Shear Vrec
HST
[kN]
8,0 13,4 20,0 31,4 48,0 44,8 8,0 13,4 20,0 31,4 43,5 44,8
HST-R
[kN]
7,4 11,4 17,1 27,5 39,7 57,0 7,4 11,4 17,1 25,5 39,7 57,0
HST-HCR
[kN]
7,4 11,4 17,1 31,4
7,4 11,4 17,1 25,5
a) With overall partial safety factor for action J = 1,4. The partial safety factors for action depend on the type of
loading and shall be taken from national regulations.
131
10 / 2012
IS-HN-D1278-2015
723
Materials
Mechanical properties of HST, HST-R, HST-HCR
Anchor size
Nominal
tensile
strength fuk
Yield strength
fyk
HST
HST-R
HST-HCR
HST
HST-R
HST-HCR
Stressed crosssection As
Moment of
resistance W
Char. bending
resistance
0
M Rk,s
[N/mm]
[N/mm]
[N/mm]
[N/mm]
[N/mm]
[N/mm]
M8
800
720
800
640
575
640
M10
800
700
800
640
560
640
M12
800
700
800
640
560
640
M16
720
650
800
580
500
640
M20
700
650
560
450
-
M24
530
650
451
450
-
[mm]
36,6
58,0
84,3
157
245
353
[mm]
31,2
62,3
109,2
277,5
540,9
935,5
30
27
30
60
53
60
105
92
105
240
216
266
454
422
-
595
730
-
HST [Nm]
HST-R [Nm]
HST-HCR [Nm]
Material quality
Part
Bolt
HST
HST-R
HST-HCR
Material
Carbon steel, galvanised to min. 5 m
Stainless steel
High corrosion resistant steel
Anchor dimensions
Anchor size
M8
M10
M12
M16
M20
M24
tfix,min
[mm]
tfix,max
[mm]
195
200
200
235
305
330
dR
[mm]
5,5
7,2
8,5
11,6
14,6
17,4
l1,min
[mm]
75
90
115
140
170
200
l1,max
[mm]
260
280
295
350
450
500
l2
[mm]
14,8
18,2
22,7
24,3
28,3
36
HST
M..
dR
l1
l2
Setting
Installation equipment
Anchor size
Rotary hammer
Other tools
M8
M10
M12
M16
M20
M24
TE2 TE16
TE40 TE70
hammer, torque wrench, blow out pump
132
10 / 2012
IS-HN-D1278-2015
724
Setting instruction
For detailed information on installation see instruction for use given with the package of the product.
For technical data for anchors in diamond drilled holes please contact the Hilti Technical advisory service.
HST
M
Setting details: depth of drill hole h1 and effective anchorage depth hef
Tinst
hef
h1
Setting details HST, HST-R, HST-HCR
M8
M10
M12
M16
M20
M24
do
[mm]
10
12
16
20
24
dcut
[mm]
8,45
10,45
12,5
16,5
20,55
24,55
h1
[mm]
65
80
95
115
140
170
df
[mm]
12
14
18
22
26
hef
[mm]
47
60
70
82
101
125
Torque moment
Tinst
[Nm]
20
45
60
110
240
300
Width across
SW
[mm]
13
17
19
24
30
36
133
10 / 2012
IS-HN-D1278-2015
725
Setting parameters
Anchor size
Minimum base material thickness
HST
Minimum spacing
in non-cracked
concrete
HST-R
HST-HCR
HST
Minimum spacing
in cracked concrete
HST-R
HST-HCR
Minimum edge
distance
in non-cracked
concrete
Minimum edge
distance
in cracked concrete
HST
HST-R
HST-HCR
HST
HST-R
HST-HCR
hmin
smin
fRUF
smin
IRUF
smin
IRUF
smin
for c
smin
IRUF
smin
IRUF
cmin
IRUV
cmin
IRUV
cmin
IRUV
cmin
IRUV
cmin
IRUV
scr,sp
scr,N
ccr,sp
ccr,N
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
M8
100
60
50
60
60
60
50
40
50
40
50
40
50
50
60
60
60
60
60
45
50
45
50
M10
120
55
80
55
70
55
70
55
70
55
65
55
70
55
115
50
115
55
115
55
90
50
90
M12
140
60
85
60
80
60
80
60
75
60
75
60
75
55
145
55
145
55
145
55
120
55
110
M16
160
70
110
70
110
70
110
70
100
70
100
70
100
85
150
70
160
70
160
70
150
60
160
M20
200
100
225
100
195
100
160
100
130
140
270
140
210
100
225
100
160
M24
250
125
255
125
205
125
180
125
130
170
295
150
235
125
240
125
140
[mm]
141
180
210
246
303
375
[mm]
71
90
105
123
152
188
For spacing (edge distance) smaller than critical spacing (critical edge distance) the d esign loads have to b e
reduced.
10 / 2012
IS-HN-D1278-2015
726
IS-HN-D1278-2015
727
Anchor Systems
Fields of Application
Technical data
Material coating/plating/finish
HKD
nn Optimum solution for serial fastenings for cable tray, HVAC, pipe
suspensions,suspended ceilings
Zinc plated
Base materials
Concrete
nn Shallow drilling depth for M6, M8, M10 and M12 (25mm)
European
Technical
Approval
Corrosion
resistance
Concrete
CE
conformity
Hilti anchor
design
software
Ordering
Internal
thread
size
Drill
bit dia.
(mm)
Hole
depth
(mm)
Anchor
length
(mm)
Standard
embedment
depth (mm)
Minimum
order qty
Galvanized
Order designation
Item no.
Order designation
Item no.
M6
27
25
25 mm
100 pc
HKD M6x25
00376894
HKD-SR M6X25
00247951
M8
10
27
25
25 mm
100 pc
HKD M8x25
00376957
M8
10
33
30
30 mm
100 pc
HKD M8x30
00376959
HKD-SR M8X30
00247952
M8
10
44
40
40 mm
50 pc
HKD M8x40
00376961
M10
12
27
25
25 mm
100 pc
HKD M10x25
00376963
M10
12
33
30
30 mm
100 pc
HKD M10x30
00376965
M10
12
44
40
40 mm
50 pc
HKD M10x40
00376967
HKD-SR M10X40
00247953
M12
15
27
25
25 mm
100 pc
HKD M12x25
00378431
M12
15
55
50
50 mm
50 pc
HKD M12x50
00378544
HKD-SR M12X50
00247954
M16
20
70
65
65 mm
25 pc
HKD M16x65
00382941
HKD-SR M16X65
00247955
M20
25
85
80
65 mm
25 pc
HKD M20x80
00382955
HKD-SR M20X80
00247956
www.hilti.com
IS-HN-D1278-2015
Stainless steel
07 Anchor Systems
17
728
294
Anchor Systems
Drop-in anchor
HKV
Order designation
Hole depth
Drill bit
diameter
Anchor length
Standard
embedment
depth
Internal
thread size
Item Number
27 mm
8 mm
25 mm
25 mm
M6
100 pc
00384616
33 mm
10 mm
30 mm
30 mm
M8
100 pc
00384966
33 mm
12 mm
30 mm
30 mm
M10
50 pc
00384968
44 mm
12 mm
40 mm
40 mm
M10
50 pc
00384969
55 mm
15 mm
50 mm
50 mm
M12
25 pc
00384971
70 mm
20 mm
65 mm
65 mm
M16
25 pc
00384973
Order designation
Diameter
Minimum order
quantity
Item Number
8 mm
TE 7-TE30
1 pc
00414475
8 mm
1 pc
00414476
8 mm
1 pc
00414477
10 mm
1 pc
00414480
10 mm
1 pc
00414481
10 mm
1 pc
00414482
Order designation
Item Number
1 pc
00243738
1 pc
00257621
1 pc
00243740
1 pc
00243741
1 pc
00247776
1 pc
00230935
1 pc
00243742
1 pc
00243743
1 pc
00243744
1 pc
00243745
295
07
Anchor Systems
IS-HN-D1278-2015
www.hilti.com
18
729
HKD-S(R)
Carbon steel,
stainless steel with
lip
HKD-E(R)
Carbon steel,
stainless steel
without lip
Concrete
a)
Tensile
zone
Sprinkler
approved
Redundant
fastening
Fire
resistance
Corrosion
resistance
Benefits
- simple and well proven
- approved, tested and confirmed
by everyday jobsite experience
- reliable setting thanks to simple
visual check
- versatile
- for medium-duty fastening with
bolts or threaded rods
- available in various materials and
sizes for maximized coverage of
possible applications
European
Technical
Approval
CE
conformity
Approvals / certificates
Description
a)
European technical approval
Fire test report
Assessment report (fire)
a)
Authority / Laboratory
DIBt, Berlin
DIBt, Berlin
warringtonfire
All data given in this section for HKD-S(R) and HKD-E(R), according ETA-06/0047, issue 2011-03-14 . The
anchor is to be used only for redundant fastening for non-structural applications.
Basic loading data for all load directions according design method B of ETAG 001
All data in this section applies to
- Correct setting (See setting instruction)
- No edge distance and spacing influence
- Concrete C 20/25 fck,cube = 25 N/mm to C50/60, fck,cube = 60 N/mm
- Minimum base material thickness
- Anchors in redundant fastening
244
10 / 2012
IS-HN-D1278-2015
20
730
M6x30
M8x25
M8x30
M8x40
M10x25
M10x30
M10x40
M12x25
M12x50
M16x65
Anchor size
HKD
kN
2,0
3,0
5,0
5,0
4,0
5,0
7,5
4,0
9,0
16,0
HKD-S, HKD-E
kN
3,0
3,0
5,0
4,0
6,0
6,0
HKD-SR, HKD-ER
kN
3,0
3,0
6,0
6,0
Load FRk
M6x30
M8x25
M8x30
M8x40
M10x25
M10x30
M10x40
M12x25
M12x50
M16x65
Anchor size
HKD
kN
1,3
2,0
2,8
3,3
2,2
3,3
5,0
2,7
6,0
10,7
HKD-S, HKD-E
kN
2,0
2,0
3,3
2,7
4,0
4,0
HKD-SR, HKD-ER
kN
2,0
2,0
4,0
4,0
Load FRd
M6x30
M8x25
M8x30
M8x40
M10x25
M10x30
M10x40
M12x25
M12x50
M16x65
Anchor size
HKD
kN
1,0
1,4
2,0
2,4
1,6
2,4
3,6
1,9
4,3
7,6
HKD-S, HKD-E
kN
1,4
1,4
2,4
1,9
2,9
2,9
HKD-SR, HKD-ER
kN
1,4
1,4
2,9
2,9
Load Frec
a) With overall partial safety factor for action J = 1,4. The partial safety factors for action depend on the type of
loading and shall be taken from national regulations.
a)
Minimum number
of fixing points
Minimum number
of anchors per fixing point
2 kN
3 kN
The value for maximum design load of actions per fastening point NSd is valid in general that means all
fastening points are considered in the design of the redundant structural system. The value NSd may be
increased if the failure of one (= most unfavourable) fixing point is taken into account in the design
(serviceability and ultimate limit state) of the structural system e.g. suspended ceiling.
245
10 / 2012
IS-HN-D1278-2015
21
731
Materials
Mechanical properties of HKD, HKD-S, HKS-E, HKD-SR and HKD-ER
Anchor size
Nominal
tensile
strength fuk
Yield
strength fyk
Stressed
crosssection As
Moment of
resistance
W
Char.
bending
resistance
for rod or
0
bolt M Rk,s
M6
M8
M10
M12
M16
HKD
[N/mm]
570
570
570
570
640
HKD-S
HKD-E
[N/mm]
560
560
510
510
HKD-SR
HKD-ER
[N/mm]
540
540
540
540
HKD
[N/mm]
460
460
460
480
510
HKD-S
HKD-E
[N/mm]
440
440
410
410
HKD-SR
HKD-ER
[N/mm]
355
355
355
355
HKD
[mm]
20,7
26,7
32,7
60,1
105
HKD-S (R)
HKD-E (R)
[mm]
20,9
26,1
28,8
58,7
HKD
[mm]
32,3
54,6
82,9
184
431
HKD-S (R)
HKD-E (R)
[mm]
50
79
110
264
[Nm]
7,6
18,7
37,4
65,5
167
HKD-SR
HKD-ER with [Nm]
A4-70
11
26
52
92
Material quality
Part
Anchor Body
Tapered expansion
plug
Material
HKD
HKD-S
HKD-E
HKD-SR
HKD-ER
HKD
Steel material
HKD-S
HKD-E
Steel material
HKD-SR
HKD-ER
246
10 / 2012
IS-HN-D1278-2015
22
732
Anchor dimensions
M6x25
M6x30
M8x25
M8x30
M8x40
M10x25
M10x30
M10x40
M12x25
M12x50
M16x65
Anchor size
Anchor version
HKD
HKD-S (R)
HKD-E (R)
Effective
anchorage depth
hef
[mm]
25
30
25
30
40
25
30
40
25
50
65
Anchor diameter
d1
[mm]
7,9
9,95
9,95
9,95
11,9
14,9 19,75
Plug diameter
d2
[mm]
5,1
6,35
6,5
6,35
8,1
8,2
8,2
9,7
10,3
13,8
Plug length
l1
[mm]
10
15
12
16
12
16
7,2
20
29
Anchor body
d2
d2
Expansions plugs
l1
l1
247
10 / 2012
IS-HN-D1278-2015
23
733
Setting
Rotary hammer
HSD-M
HSD-G
6x25/30
8x25/30
8x40
10x25/30
M16x65
M12x50
M12x25
M10x40
M10x30
M10x25
TE 2 TE 16
Other tools
M8x40
M8x30
M8x25
M6x25
Anchor size
M6x30
Installation equipment
TE 16 50
10x40 12x25 12x50 16x65
Setting instruction
For detailed information on installation see instruction for use given with the package of the product.
248
10 / 2012
IS-HN-D1278-2015
24
734
Setting details: depth of drill hole h1 and effective anchorage depth hef
Screwing depth
M10x25
M10x30
M10x40
M12x25
M12x50
M16x65
dcut [mm]
M8x40
[mm]
M8x30
do
M8x25
Nominal diameter of
drill bit
Cutting diameter of
drill bit
Depth of drill hole
M6x30
Anchor size
M6x25
Setting details
10
10
10
12
12
12
15
15
20
8,45
8,45
10,5
10,5
10,5
12,5
12,5
12,5
15,5
15,5
20,5
h1
[mm]
27
32
27
33
43
27
33
43
27
54
70
ls,min
[mm]
10
10
10
12
12
16
ls,max
[mm]
12
12,5
11,5
14,5
17,5
12
13
18
12
22
30,5
[mm]
12
12
12
14
14
18
[mm]
25
30
25
30
40
25
30
40
25
50
65
[Nm]
15
15
15
35
35
60
Diameter of clearance
df
hole in the fixture
Effective anchorage
hef
depth
Max. torque moment Tinst
249
10 / 2012
IS-HN-D1278-2015
25
735
Minimum base
material thickness
Minimum spacing
and Minimum edge
distance
HKD
HKD-S (R)
HKD-E (R)
Minimum base
material thickness
hmin
[mm]
smin
[mm]
cmin
[mm]
hmin
[mm]
M6x25
M8x25
M10x25
M12x25
M6x30
M8x30
M10x30
M8x40
M10x40
M12x50
M16x65
80
80
80
200
200
200
150
150
150
100
100
100
100
130
80
60
80
125
130
140
105
140
175
230
[mm]
Minimum spacing
and minimum edge
distance
HKD-S (R)
HKD-E (R)
smin
Minimum spacing
HKD
smin
[mm]
80
60
80
125
130
for F
[mm]
140
105
140
175
230
Minimum edge
distance
HKD
cmin
[mm]
100
80
140
175
230
IRUV
[mm]
150
120
80
125
130
cmin
[mm]
For spacing (edge distance) smaller than critical spacing (critical edge distance) the design loads have to be
reduced.
250
10 / 2012
IS-HN-D1278-2015
26
736
11422
5287
+966 1 460 8974
+966 1 460 6255
8001200013
www.hilti.com
CR 1010278712
LLC Paid up capital SAR 39,230,000
1010278712
39,230,000 -
Method Statement
Hilti Drop-In Anchor HKD
Dear Sir,
This method statement describes the procedures of installing standard elements in concrete
structure and implies the use of Hilti drop-in anchors HKD.
Instruction for use:
These instructions at next pages cover the installation of HKD anchor in solid concrete and in
bottom flanges of precast pre-stressed hollow core slabs.
Please if there any further requirement; do not hesitate to contact Hilti.
Thanks & Regards,
28
IS-HN-D1278-2015
737
5287
+966 1 460 8974
+966 1 460 6255
11422
8001200013
www.hilti.com
1010278712
- 39,230,000
CR 1010278712
LLC Paid up capital SAR 39,230,000
Sitting Instruction
29
738
IS-HN-D1278-2015
5287
+966 1 460 8974
+966 1 460 6255
11422
8001200013
www.hilti.com
1010278712
- 39,230,000
30
739
IS-HN-D1278-2015
CR 1010278712
LLC Paid up capital SAR 39,230,000
Handelsbezeichnung
Trade name
Hilti Aktiengesellschaft
Business Unit Anchors
9494 Schaan
FRSTENTUM LIECHTENSTEIN
Zulassungsinhaber
Holder of approval
Zulassungsgegenstand
und Verwendungszweck
Geltungsdauer:
Validity:
vom
from
bis
to
Herstellwerk
28 September 2012
14 March 2016
Hilti Werke
Manufacturing plant
8.06.01-202/11
IS-HN-D1278-2015
32
740
Gesetz ber das In-Verkehr-Bringen von und den freien Warenverkehr mit Bauprodukten zur
Umsetzung der Richtlinie 89/106/EWG des Rates vom 21. Dezember 1988 zur Angleichung
der Rechts- und Verwaltungsvorschriften der Mitgliedstaaten ber Bauprodukte und anderer
Rechtsakte der Europischen Gemeinschaften (Bauproduktengesetz - BauPG) vom
28. April 19984, as amended by Article 2 of the law of 8 November 20115;
Common Procedural Rules for Requesting, Preparing and the Granting of European
technical approvals set out in the Annex to Commission Decision 94/23/EC6;
Guideline for European technical approval of "Metal anchors for use in concrete - Part 6:
Anchors for multiple use for non-structural applications", ETAG 001-06.
Deutsches Institut fr Bautechnik is authorized to check whether the provisions of this European
technical approval are met. Checking may take place in the manufacturing plant. Nevertheless,
the responsibility for the conformity of the products to the European technical approval and for
their fitness for the intended use remains with the holder of the European technical approval.
The European technical approval is issued by the approval body in its official language. This
version corresponds fully to the version circulated within EOTA. Translations into other
languages have to be designated as such.
1
2
3
4
5
6
Z54610.12
8.06.01-202/11
IS-HN-D1278-2015
33
741
II
1.1
1.2
Intended use
The anchor is intended to be used for anchorages for which requirements for safety in use in
the sense of the Essential Requirements 4 of Council Directive 89/106 EEC shall be fulfilled and
failure of the fixture represents an immediate risk to human life. The anchor is to be used only
for multiple use for non-structural applications. The definition of multiple use according to the
Member States is given in the informative Annex 1 of ETAG 001, Part 6.
The anchor may be used for anchorages with requirements related to resistance to fire.
The anchor is to be used only for anchorages subject to static or quasi-static loading in
reinforced or unreinforced normal weight concrete of strength classes C20/25 at minimum and
C50/60 at most according to EN 206-1:2000-12.
It may be anchored in cracked or non-cracked concrete. Sizes M6x25, M8x25 and M10x25 may
also be used in bottom flanges of precast prestressed hollow core slabs according to Annex 6.
Anchor made of galvanised steel (Hilti HKD, HKD woL, HKD-S, HKD-E):
The anchor made of galvanised steel may only be used in structures subject to dry
internal conditions.
Anchor made of stainless steel (Hilti HKD-SR, HKD-ER):
The anchor made of stainless steel may be used in structures subject to dry internal
conditions and also in structures subject to external atmospheric exposure (including
industrial and marine environment), or exposure in permanently damp internal conditions,
if no particular aggressive conditions exist. Such particular aggressive conditions are e.g.
permanent, alternating immersion in seawater or the splash zone of seawater, chloride
atmosphere of indoor swimming pools or atmosphere with extreme chemical pollution
(e. g. in desulphurization plants or road tunnels where de-icing materials are used).
The provisions made in this European technical approval are based on an assumed working life
of the anchor of 50 years. The indications given on the working life cannot be interpreted as a
guarantee given by the producer, but are to be regarded only as a means for choosing the right
products in relation to the expected economically reasonable working life of the works.
Z54610.12
8.06.01-202/11
IS-HN-D1278-2015
34
742
2.1
Characteristics of product
The anchor corresponds to the drawings and provisions given in Annexes 1 to 4. The
characteristic material values, dimensions and tolerances of the anchor not given in Annexes 1
to 4 shall correspond to the respective values laid down in the technical documentation7 of this
European technical approval.
Regarding the requirements concerning safety in case of fire it is assumed that the anchor
meets the requirements of class A1 in relation to reaction to fire in accordance with the
stipulations of the Commission decision 96/603/EC, amended by 2000/605/EC.
The characteristic values for the design of anchorages are given in Annexes 9 to 12.
The characteristic values for the design of the anchorages regarding resistance to fire are given
in Annex 13. They are valid for use in a system that is required to provide a specific fire
resistance class.
The following designations are used for different anchor versions (see Annex 1):
-
HKD-woL
HKD-S
HKD-SR
HKD-E
HKD-ER
machined anchor made of stainless steel without lip
Each anchor is marked with the identifying mark of the producer, the anchor identity, the thread
size, the effective anchorage depth (hef) and the outer diameter of the anchor body ( d1)
according to Annex 1. In addition, the anchor body for anchor size M8x40 and M10x40 are
marked on the top of the anchor body according to Annex 2. The anchor made of stainless steel
is marked with the additional letter "R".
The anchor shall only be packaged and supplied as a complete unit.
2.2
Methods of verification
The assessment of fitness of the anchor for the intended use in relation to the requirements for
safety in use in the sense of the Essential Requirements 4 has been made in accordance with
the "Guideline for European technical approval of Metal Anchors for use in concrete", Part 1
"Anchors in general" and Part 6 "Anchors for multiple use for non-structural applications".
The assessment of the anchor for the intended use in relation to the requirements for resistance
to fire has been made in accordance with the Technical Report TR 020 "Evaluation of
anchorages in concrete concerning resistance to fire".
The technical documentation of this European technical approval is deposited at the Deutsches Institut fr Bautechnik
and, as far as relevant for the tasks of the approved bodies involved in the attestation of conformity procedure, is
handed over to the approved bodies.
Z54610.12
8.06.01-202/11
IS-HN-D1278-2015
35
743
In addition to the specific clauses relating to dangerous substances contained in this European
technical approval, there may be other requirements applicable to the products falling within its
scope (e.g. transposed European legislation and national laws, regulations and administrative
provisions). In order to meet the provisions of the Construction Products Directive, these
requirements need also to be complied with, when and where they apply.
3
3.1
3.2
3.2.1
3.2.1.1
Responsibilities
Tasks of the manufacturer
Factory production control
The manufacturer shall exercise permanent internal control of production. All the elements,
requirements and provisions adopted by the manufacturer shall be documented in a systematic
manner in the form of written policies and procedures, including records of results performed.
This production control system shall insure that the product is in conformity with this European
technical approval.
The manufacturer may only use initial / raw / constituent materials stated in the technical
documentation of this European technical approval.
The factory production control shall be in accordance with the control plan which is part of the
technical documentation of this European technical approval. The control plan is laid down in
the context of the factory production control system operated by the manufacturer and
deposited at Deutsches Institut fr Bautechnik.9
The results of factory production control shall be recorded and evaluated in accordance with the
provisions of the control plan.
8
9
Z54610.12
8.06.01-202/11
IS-HN-D1278-2015
36
744
3.2.1.2
Assumptions under which the fitness of the product for the intended use was favourably
assessed
4.1
Manufacturing
The European technical approval is issued for the product on the basis of agreed
data/information, deposited with Deutsches Institut fr Bautechnik, which identifies the product
that has been assessed and judged. Changes to the product or production process, which
could result in this deposited data/information being incorrect, should be notified to Deutsches
Institut fr Bautechnik before the changes are introduced. Deutsches Institut fr Bautechnik will
decide whether or not such changes affect the European technical approval and consequently
the validity of the CE marking on the basis of the European technical approval and if so whether
further assessment or alterations to the European technical approval shall be necessary.
Z54610.12
8.06.01-202/11
IS-HN-D1278-2015
37
745
4.2
Design of anchorages
The fitness of the anchor for the intended use is given under the following conditions:
The anchorages are designed in accordance with the "Guideline for European technical
approval of Metal Anchors for Use in Concrete", Annex C, Method B, for deformation-controlled
expansion anchors under the responsibility of an engineer experienced in anchorages and
concrete work.
Verifiable calculation notes and drawings are prepared taking account of the loads to be
anchored.
The position of the anchor is indicated on the design drawings (e. g. position of the anchor
relative to reinforcement or to supports).
The minimum strength class and the minimum screwing depth of the fastening screw or
threaded rod for installation of the fixture shall meet the requirements according to Annex 5.
The length of the fastening screw or threaded rod shall be defined according to the available
thread length, the minimum screwing depth, the thickness of fixture and tolerances of member
and fixture.
The design of anchorages under fire exposure has to consider the conditions given in the
Technical Report TR 020 "Evaluation of anchorages in concrete concerning resistance to fire".
The relevant characteristic values are given in Annex 13. The design method covers anchors
with a fire attack from one side only. If the fire attack is from more than one side, the design
method may be taken only, if the edge distance of the anchor is c 300 mm.
The characteristic values for design of anchorages regarding resistance to fire do not apply for
use in precast prestressed hollow core elements.
Local spalling is possible at fire attack. To avoid any influence of the spalling on the anchorage,
the concrete member must be designed according to prEN 1992-1-2. The members shall be
made of concrete with quartzite additives and have to be protected from direct moisture; and
the moisture content of the concrete has to be like in dry internal conditions respectively. The
anchorage depth has to be increased for wet concrete by at least 30 mm compared to the given
value in the approval.
4.3
Installation of anchors
The fitness for use of the anchor can only be assumed if the anchor is installed as follows:
Anchor installation carried out by appropriately qualified personnel and under the
supervision of the person responsible for technical matters of the site.
Use of the anchor only as supplied by the manufacturer without exchanging the components
of an anchor.
Anchor installation in accordance with the manufacturers specifications and drawings and
using the appropriate tools.
Checks before placing the anchor to ensure that the strength class of the concrete in which
the anchor is to be placed is in the range given and is not lower than that of the concrete to
which the characteristic loads apply.
Check of concrete being well compacted, e.g. without significant voids.
Positioning of the drill holes without damaging the reinforcement.
Drill hole by hammer drilling only.
Cleaning of the drill hole.
Edge distances and spacing not less than the specified values without minus tolerances.
In case of aborted hole: new drilling at a minimum distance away of twice the depth of the
aborted hole or smaller distance if the aborted drill hole is filled with high strength mortar and
if under shear or oblique tension load it is not in the direction of load application.
Anchor installation acc. to manufacturer's instructions given in Annex 7 and 8.
Z54610.12
8.06.01-202/11
IS-HN-D1278-2015
38
746
Anchor expansion by impact on the cone using the setting tools given in Annex 4. The
anchor is properly set if the stop of the pin reaches the anchor body and the impression of
the setting tool for marking is visible as illustrated in Annex 4.
The fastening screw or threaded rod shall correspond to the requirements given in Annex 5.
Installation torque moments are not required for functioning of the anchor. However, the
torque moments given in Annex 5 must not be exceeded.
5
Andreas Kummerow
p. p. Head of Department
beglaubigt:
Baderschneider
Z54610.12
8.06.01-202/11
IS-HN-D1278-2015
39
747
Z71158.12
IS-HN-D1278-2015
40
748
8.06.01-202/11
Z71158.12
IS-HN-D1278-2015
41
749
8.06.01-202/11
Z71158.12
IS-HN-D1278-2015
42
750
8.06.01-202/11
Z71158.12
IS-HN-D1278-2015
43
751
8.06.01-202/11
Z71158.12
IS-HN-D1278-2015
44
752
8.06.01-202/11
Z71158.12
IS-HN-D1278-2015
45
753
8.06.01-202/11
Z71158.12
IS-HN-D1278-2015
46
754
8.06.01-202/11
Z71158.12
IS-HN-D1278-2015
47
755
8.06.01-202/11
Z71158.12
IS-HN-D1278-2015
48
756
8.06.01-202/11
Z71158.12
IS-HN-D1278-2015
49
757
8.06.01-202/11
Z71158.12
IS-HN-D1278-2015
50
758
8.06.01-202/11
Z71158.12
IS-HN-D1278-2015
51
759
8.06.01-202/11
Z71158.12
IS-HN-D1278-2015
52
760
8.06.01-202/11