Professional Documents
Culture Documents
Antifriction Bearings
Linear Systems
Linear Systems
Perfection from principle.
Aluminium Linear Systems from Franke are the best solution when you need
translational motion. The essential components of these durable systems:
Aluminium Linear Systems, specially designed raceways, cassettes or pairs
of roller shoes with rollers.
Thanks to the patented guide system, the rollers are perfectly placed in
the guide rails on four raceways. The 4-point contact takes loads from
all directions.
The range:
Systems with O-arranged rollers
Systems with 2 rows of recirculating rollers
Systems with 1 row of recirculating balls
Linear Tables and Linear Modules
Antifriction Bearings
Patented precision.
Mechanical processes are circular; our bearings make it possible. They
comprise four race rings, balls, a ball cage and, on request, enclosed design.
They are based on a patented principle: four race rings form the heart of the
bearing. Thanks to a specially developed grinding procedure they fit their
raceway exactly adjusted to the ball diameter. Therefore, the rolling process
does not occur directly between the rolling elements and enclosed design, but
rather smoothly on the four open race rings. Thanks to the 4-point contact,
the systems can take loads of any level from all directions.
Daniel Groz
Sascha Eberhard
Daniel Groz
Managing Director
Sascha Eberhard
Managing Director
Contents
Page
The Company
6 15
Antifriction Bearings
16 63
16 19
20 23
24 27
28 39
Bearing Assemblies
40 51
Rotary Tables
52 53
Accessories
54 55
Technical Information
56 63
Linear Systems
64 115
64 67
68 71
72 77
Franke Dynamic
78 91
Franke Power
92 93
Franke Robust
94 95
Linear Tables/Modules
96 101
Accessories
102 105
Technical Information
106 115
Partners
116 118
Service, Contact
119 120
Customised work.
Yesterday. Today. Tomorrow.
Erich Franke invented the Antifriction Bearing in 1934, which impressed both with its flexibility
and load capacity. Since our beginnings almost 60 years ago, everything in our company has
revolved around the Antifriction Bearing. Today, Franke is a synonym for extensive experience
and absolute precision in Antifriction Bearings and Linear Systems.
Diverse in application.
Constant in advantages.
Our customer base is as broad as our range of products. For example, our customers
are involved in machinery, medical technology and the textile industries. We have a leading
position in the market with our Antifriction Bearings, particularly in computer tomography
in medical technology and for circular knitting machines in the textile industry.
Medical technology
Machinery
Textile industry
Clean room technology
Robotics
Research
Food industry
Packaging industry
10
11
Lubricant-free
12
Anodized aluminium
Special gear
Special cages
Special seals
13
No lubricant residue
14
Aluminium profiles
Integrated wipers
Numerous variations
15
16
LEL
LED
LER
Components
Rectangular profile
with profiled raceway
Plastic cage with
retained balls
Options
Special materials
Special rolling elements
Surface coatings
Special cages
Surface coatings
Surface coatings
Special cages
Advantages
Smallest mounting
space, as particularly
compact
Easy fitting
Consists of just two
race rings
Use
Individually adjustable
to the application,
therefore, suitable for
almost all uses
1.5 7
0.75 22
4x3
4 x 3.5
5x5
5 16
4 50
9.525
10, 12
9.525
9.525
12
11 x 13
11 x 12
14.5 x 14.5
10.51 x 5
Ball pitch
diameter (mm)
Standard
Special
70 2000
40 7000
100 1500
100 500
More on page
28 31
32 33
34
37
17
35
36
LEG
NEW
Type
Systems
LDD
LDL
LDV
LDH
LTA, LTB
Bearing assembly of
steel or aluminium
Double-sided seal
With or without gear
Bearing assembly of
steel
One-sided seal
Bearing assembly of
steel as angular ball
bearing
End switch
Rotary encoder
Motorisation
Steering
Measuring systems
Special materials
Special rolling elements
Surface coatings
Gear to specifi cations
Easy fitting, as
pre-finished bearing
element
Bearing cross section
in accordance
with international
standards
Ready-to-connect
complete bearing
With preload
High accuracy
Ready-to-connect
complete bearing
Available from stock
Competetive price
High accuracy
Geometry, cross
section, set-up of
choice
Adjustment adjustable
Silent bearing for very
quiet and low-vibration
running
Franke four-point
bearing as basic
component
Adaptors for customerspecific motors
Aluminium housing
High accuracy
High centre freedom
Prefinished bearing
element for diverse
applications
Individually adjustable
to the application,
therefore, suitable for
almost all uses
Individual adjustment
to the application
possible if series
required
6 20
3/8 1
5.125 26
100 1500
Customers choice
200 600
21 41
Customers choice
100 400
Customers choice
38 39
40 49
50
51
52 53
18
Bearing Assemblies
Antifriction Bearings
Page
28 31
32 33
34 36
37
38 39
Bearing Assemblies
Type LDL
Steel design
Type LDL
Aluminium design
Type LDL
Spur gear
Type LDL
Toothed belt gear
Type LDV
Steel design preference series
Type LDH
Steel design angular ball bearings
40 41
42 43
44 47
48 49
50
51
Standard
Precise design
52
53
Rotary Tables
Rotary Tables
Type LTA
Type LTB
Bearing Assemblies
Bearing Elements
Type LEL
Ground design
Type LED
Double profile
Type LER
Rectangular profile
Type LEG
2-ring bearing element
Type LDD
Slim bearing
Bearing Elements
54 55
Technical Information
Bearing Elements
Bearing Assemblies
Rotary Tables
Adjustment Values and Accuracy
56 58
58 60
60
61 62
Technical Information
Accessories
Accessories
Antifriction Bearings
19
In Medical Technology:
Computer Tomography
In Machinery:
Machining Centres
The Features:
Smooth and low-vibration running is even ensured at high
rotary speeds thanks to CNC-ground raceways.
The elastomer profiles between the race rings and the race
ring bed form the basis for muted noise development and
electrical insulation of the inner and outer ring.
The silent bearing impresses with rotary speeds of up to
300 revolutions per minute.
The Features:
Due to the high centre freedom of the bearing assemblies,
the drive system can be installed to the inside.
Labyrinth seals protect the raceways of the bearing
assemblies from chipping and coolants.
The preload of the bearing guarantees high accuracy and
even adjustment thus, nothing stands in the way of quiet
running and maximum precision.
Ball diameter: 12 mm
Bearing diameter: 1500 mm
20
The Features:
Even under severe thermal and mechanical loads, the
bearing elements enable exact radial and axial guiding
of the needles.
The rotary speeds are up to 60 revolutions per minute.
The quality of the machines is determined amongst other
things by the quiet running of the bearing and the high
surface quality of the raceways.
The Features:
So that the illumination optics can work with extremely
low tolerances, the bearing has good radial and axial
accuracy and high stiffness.
Low-abrasion materials, special balls, a special ball cage
and freedom from lubricants meet the necessary requirements for the clean room.
The final cleaning and packing of the bearing is effected
for clean room level 10000.
Weight is saved by using aluminium.
Ball diameter: 6 mm
Bearing diameter: 138 mm
21
In Machinery:
Indexing Tables
In Automation:
Robots
Our bearing elements are ideally suited for use in the mobile
axles of small robots.
The Features:
The bearing elements are precisely adjusted to the
different loads. Enormous loads can easily be borne from
all directions.
The Antifriction Bearings guarantee that the Rotary Table
can move without jerks or shocks, high repeat accuracy
is included.
The Features:
The ingenious 4-point system from Franke facilitates high
capacity from all directions of movement.
As the bearing element is integrated into the existing robot
design, only minimal installation space is needed.
The high centre freedom of the bearing enables cables
and supply pipes to be fed through.
Ball diameter: 20 mm
Bearing diameter: 800 mm
Ball diameter: 6 mm
Bearing diameter: 240 mm
22
In Research:
Lamp Positioning
The Features:
Aluminium components are the basis for the low weight of
the bearing, the high radial and axial accuracy guarantees
exact positioning.
The bearing is supplied complete: with driving pinion and
planet angular gear.
The bearings large centre freedom provides space for the
robots used and for feeding in supply lines.
The bore shape is oriented to customer requirements.
The Features:
The bearings withstand temperatures up to 200 C.
High accuracy requirements for radial and axial running
are fulfilled.
The bearings can optionally be adjusted to all interface
dimensions.
Ball diameter: 20 mm
Bearing diameter: 1500 mm
Ball diameter: 16 mm
Bearing diameter: 850 mm
23
4 race rings
Rolling elements
The Characteristics:
Race Rings
The four race rings have a diameter of 1.5 to 7 mm as standard.
The special diameters are 0.75 to 22 mm. Different race ring
diameters can be combined with different ball diameters.
Rolling Elements
The standard steel rolling elements correspond to DIN 5401, G28.
They are matched in tolerance and grade. Grades up to G3 are
available for high accuracy applications.
24
The Advantages:
Direct integration of the bearing in the application
Minimum space needed thanks to compact design and
low bearing cross section
Acceptance of loads from all directions thanks to four-point
geometry
Best radial and axial accuracy
High running performance and capacity thanks to raceways
precisely adjusted to the ball diameters
Shock-resistant thanks to internal elasticity
Rotational resistance freely adjustable
Seals
Housing Design
The race rings provide the necessary stiffness and precision
of the bearing as far as possible. They bear the main load.
The possibilities are endless for designing the connecting design.
The encapsulating design is not directly exposed to the demands
of the rolling elements. Thus, steel, cast iron, aluminium, noncorrosive, bronze, compounds or plastic can be used for the
design. The weight saving is up to 65 % depending on the
material chosen.
The result: a component with high quality mounting, which
matches a conventional steel bearing in running performance,
capacity and precision and is precisely adjusted to the
application.
Seal
Seals can be ordered as bulk stock for sealing the design. Viton
seals are available for high temperatures or aggressive media.
25
Outer ring
Franke bearing
element
Inner ring
Seal
The Characteristics:
Bearing Element
The integrated bearing element comprises four race rings and a
plastic cage with retained balls. Depending on the application
of the bearing assembly, the bearing element is designed as a
conventional four-point bearing, radial or axial bearing. For special
applications, such as main bearings for computer tomographs,
there are double row angular bearings of various designs.
The performance of the bearing assembly is decisively
influenced by the bearing element used. The right bearing
element is chosen according to the requirements of the
bearing assembly. Depending on the application and the load
situation, bearing elements of the type LEL with ground
raceway or LED type or LER with profiled raceway are
used. In addition to the standard ranges, various special
combinations of race ring cross sections and rolling element
diameters are possible, to meet the requirements of your
individual application.
26
The Advantages:
Customer-specific special bearing
Free choice of material, aluminium version 65 % lighter than
steel design
Individually adjusted bore shape for direct attachment to
the connecting design
Integrated Franke bearing element for loads from all
directions, high performance and precision
High dynamic, maximum peripheral speed up to 20 m/s
Adjustment shim
Solid adjustment
Ring nut
Seal
A lip seal is a standard component of Franke bearing assemblies.
Both sides are sealed on the LDL type. The LDV type has a
one-sided seal.
Adjustment
Franke bearing assemblies are preloaded and free from
clearance. The rotational resistance can be adjusted to the
customers requirements on request.
27
Bearing Elements
Type LEL
Bearing Elements
Ground raceways
LEL 1.5/5
KK
mm
70
80
90
100
110
120
130
140
150
Coa
13
15
18
20
22
23
25
27
30
Load ratings
KN
Cor
Ca
6
7
8
9
10
11
12
13
14
7
7
8
8
8
9
9
9
10
Weight
kg
Order no.
Cr
6
6
7
7
7
8
8
8
8
0.04
0.05
0.05
0.06
0.07
0.07
0.08
0.09
0.09
68470A
68472A
68474A
68476A
68478A
68480A
68482A
68484A
71033A
LEL 2.5/8
KK
mm
160
170
180
190
200
210
220
230
240
250
260
270
280
290
300
28
Coa
73
79
83
88
92
97
102
106
112
115
121
126
130
135
139
Load ratings
KN
Cor
Ca
35
37
39
41
43
46
48
50
53
54
57
59
61
64
65
20
20
20
21
21
22
22
22
23
23
24
24
24
25
25
Weight
kg
Order no.
Cr
17
17
18
18
18
19
19
19
20
20
20
21
21
21
21
0.10
0.11
0.11
0.12
0.12
0.13
0.13
0.14
0.15
0.15
0.16
0.16
0.17
0.18
0.18
71037A
71041A
71045A
71049A
71053A
71057A
71061A
68487A
68489A
68491A
68493A
68495A
68497A
68499A
68501A
Materials
Race ring
Balls
Cage
Standard
54SiCr6
100Cr6
DIN 5401, G28
PA12
Non-corrosive
Bronze
Brass
Teflon
Laminate
Bearing Elements
Special
Niro X12CrNi177 Niro X45Cr13
Niro X7CrNiAl177 POM
Duratherm
Ceramic Al2O3
Ceramic Si3N4
LEL 4/9.525
KK
mm
200
210
220
230
240
250
260
270
280
290
300
320
340
360
380
400
420
440
460
480
500
520
540
560
580
600
620
640
660
680
700
720
740
760
780
800
820
840
860
880
900
920
960
1000
1100
1200
1300
1400
1500
Coa
Load ratings
KN
Cor
Ca
Cr
118
123
128
136
142
147
153
161
166
172
177
191
202
215
226
240
251
264
275
286
299
310
302
312
325
335
348
358
370
381
393
403
414
426
436
449
459
472
482
495
505
517
540
560
619
674
730
788
844
55
58
60
64
67
69
72
76
78
81
83
90
95
101
106
113
118
124
129
135
141
146
142
147
153
158
164
168
174
179
185
190
195
201
205
211
216
222
227
233
238
243
254
264
291
317
344
371
397
23
23
23
24
24
25
25
25
26
26
26
27
28
28
29
29
30
31
31
31
32
32
33
33
34
34
35
35
35
36
36
37
37
37
38
38
38
39
39
39
40
40
41
41
43
44
45
47
48
26
27
27
28
28
28
29
29
30
30
30
31
32
33
33
34
35
35
36
36
37
37
38
38
39
39
40
40
41
41
42
42
43
43
43
44
44
45
45
45
46
46
47
48
49
51
52
54
55
Weight
kg
0.39
0.41
0.43
0.45
0.47
0.49
0.51
0.53
0.55
0.57
0.59
0.63
0.66
0.71
0.74
0.78
0.82
0.86
0.90
0.94
0.98
1.02
1.06
1.10
1.14
1.17
1.22
1.25
1.29
1.33
1.37
1.41
1.45
1.49
1.53
1.57
1.61
1.65
1.68
1.73
1.76
1.80
1.88
1.96
2.16
2.35
2.55
2.75
2.94
Order no.
68502A
68504A
68506A
68508A
68510A
68512A
68514A
68516A
68518A
68520A
67503A
67505A
67507A
67509A
67511A
68522A
68524A
68526A
68528A
68530A
68532A
68534A
68536A
68538A
68540A
68542A
68544A
68546A
68548A
68550A
68552A
68554A
68556A
68558A
68560A
68562A
68564A
68566A
68568A
68570A
68572A
68573A
68575A
68577A
68582A
68587A
68592A
68597A
68602A
29
Bearing Elements
Type LEL
Bearing Elements
Ground raceways
LEL 5/12
KK
mm
220
230
240
250
260
270
280
290
300
320
340
360
380
400
420
440
460
480
500
520
540
560
580
600
620
640
660
680
700
720
740
760
780
800
820
840
860
880
900
920
940
960
980
1000
1100
1200
1300
1400
1500
30
Coa
221
231
242
253
263
274
285
295
306
328
349
370
392
408
429
450
472
493
515
536
557
579
600
622
638
659
680
702
723
745
766
787
809
830
852
868
889
911
932
953
975
996
1018
1034
1141
1242
1349
1456
1558
Load ratings
KN
Cor
Ca
Cr
104
109
114
119
124
129
134
139
144
154
164
174
184
192
202
212
222
232
242
252
262
272
282
293
300
310
320
330
340
350
361
371
381
391
401
408
418
429
439
449
459
469
479
486
537
585
635
685
733
32
33
33
34
34
35
35
36
36
37
38
39
40
40
41
42
42
43
44
45
45
46
46
47
47
48
49
49
50
50
51
51
52
52
53
53
54
54
55
55
55
56
56
57
59
61
62
64
66
37
38
38
39
39
40
41
41
42
43
44
45
46
46
47
48
49
50
51
52
52
53
54
54
55
55
56
57
58
58
59
59
60
61
61
61
62
62
63
64
64
65
65
65
68
70
72
74
76
Weight
kg
0.65
0.68
0.71
0.74
0.77
0.80
0.83
0.86
0.89
0.95
1.01
1.07
1.13
1.18
1.24
1.30
1.36
1.42
1.48
1.54
1.60
1.66
1.73
1.79
1.84
1.90
1.96
2.02
2.08
2.14
2.20
2.26
2.32
2.38
2.44
2.49
2.55
2.61
2.67
2.73
2.79
2.86
2.92
2.97
3.27
3.56
3.86
4.17
4.46
Order no.
68603A
68605A
68607A
68609A
68611A
68613A
68615A
68617A
68619A
68621A
68623A
68625A
68627A
68629A
68631A
68633A
68635A
68637A
68639A
68641A
68643A
68645A
68647A
68649A
68651A
68653A
68655A
68657A
68659A
68661A
68663A
68665A
68667A
68669A
68671A
68673A
68675A
68677A
68679A
68680A
68681A
68682A
68683A
68684A
68689A
68694A
68699A
68704A
68709A
Materials
Race ring
Balls
Cage
Standard
54SiCr6
100Cr6
DIN 5401, G28
PA12
Non-corrosive
Bronze
Brass
Teflon
Laminate
Bearing Elements
Special
Niro X12CrNi177 Niro X45Cr13
Niro X7CrNiAl177 POM
Duratherm
Ceramic Al2O3
Ceramic Si3N4
LEL 7/16
KK
mm
340
360
380
400
420
440
460
480
500
520
540
560
580
600
620
640
660
680
700
720
740
760
780
800
820
840
860
880
900
920
940
960
980
1000
1060
1100
1160
1200
1260
1300
1360
1400
1460
1500
1600
1700
1800
1900
2000
Coa
432
466
491
517
542
567
593
618
644
678
703
728
753
779
804
829
855
889
914
939
965
990
1015
1041
1074
1100
1125
1151
1176
1201
1227
1252
1277
1302
1387
1438
1522
1573
1649
1700
1784
1835
1911
1970
2021
2122
2232
2283
2629
Load ratings
KN
Cor
Ca
203
219
231
243
255
267
279
291
303
319
331
343
355
366
378
390
402
418
430
442
454
466
478
490
506
518
529
541
553
565
577
589
601
613
653
677
716
740
776
800
840
864
899
927
951
999
1050
1074
1237
61
63
64
65
66
67
69
70
71
72
73
74
78
76
77
78
78
80
81
81
82
83
84
84
85
86
87
88
88
89
90
90
91
92
94
95
97
98
100
101
103
104
106
107
108
110
112
113
119
Weight
kg
Order no.
Cr
53
54
55
56
57
58
59
60
61
62
63
64
68
66
66
67
68
69
70
70
71
72
72
73
74
75
75
76
76
77
78
78
79
79
81
82
84
85
86
87
89
90
91
92
93
95
97
97
103
1.89
2.02
2.13
2.24
2.35
2.46
2.57
2.68
2.79
2.92
3.03
3.14
3.25
3.36
3.47
3.58
3.69
3.82
3.93
4.04
4.15
4.26
4.37
4.48
4.61
4.72
4.83
4.94
5.05
5.16
5.27
5.38
5.49
5.60
5.95
6.17
6.52
6.74
7.07
7.29
7.64
7.86
8.19
8.43
8.65
9.09
9.55
9.77
11.24
68711A
68713A
68715A
68717A
68719A
68721A
68723A
68725A
68727A
68729A
68731A
68733A
68735A
68737A
68739A
68741A
68743A
68745A
68747A
68749A
68751A
68753A
68755A
68757A
68759A
68761A
68763A
68765A
68767A
68768A
68769A
68770A
68771A
68772A
68775A
68777A
68780A
68782A
68785A
68787A
68790A
68792A
68795A
68797A
68799A
68801A
68803A
68805A
68807A
31
Bearing Elements
Type LED
Bearing Elements
Double profile,
ground or unground raceways
32
Coa
Load ratings
KN
Cor
Ca
Cr
53
64
77
87
100
111
123
134
147
155
168
179
191
202
213
225
238
247
259
270
283
293
306
317
329
338
351
361
374
385
397
408
421
431
444
453
465
476
487
499
510
544
567
623
682
737
797
852
25
30
36
41
47
52
58
63
69
73
79
84
90
95
100
106
112
116
122
127
133
138
144
149
155
159
165
170
176
181
187
192
198
203
209
213
219
224
229
235
240
256
267
293
321
347
375
401
17
18
20
20
22
23
24
24
25
26
27
27
28
28
29
29
30
31
31
32
32
33
33
33
34
34
35
35
36
36
36
37
37
37
38
38
39
39
39
40
40
41
41
43
44
46
47
48
20
21
23
23
25
27
28
28
29
30
31
31
32
32
34
34
35
36
36
37
37
38
38
38
39
39
41
41
42
42
42
43
43
43
44
44
45
45
45
46
46
47
47
50
51
53
54
56
Weight
kg
0.26
0.28
0.31
0.34
0.37
0.40
0.43
0.47
0.51
0.56
0.61
0.64
0.66
0.69
0.72
0.75
0.79
0.82
0.86
0.89
0.93
0.97
1.01
1.06
1.10
1.15
1.20
1.25
1.31
1.37
1.43
1.49
1.55
1.62
1.69
1.76
1.84
1.92
2.00
2.09
2.18
2.33
2.43
2.70
3.00
3.34
3.71
4.00
Order no.
68310A
68314A
68318A
77202A
77206A
77210A
77214A
77218A
77222A
77226A
77230A
77232A
77234A
77236A
77238A
77240A
77242A
77244A
77246A
77248A
77250A
77252A
77254A
77256A
77258A
77260A
77262A
77264A
77266A
77268A
77270A
77272A
77274A
77276A
77278A
77280A
77282A
77284A
77286A
77288A
77290A
77293A
77295A
77300A
77305A
77310A
77315A
77320A
Materials
Race ring
Balls
Cage
Standard
54SiCr6
100Cr6
DIN 5401, G28
PA12
Non-corrosive
Brass
Bronze
Teflon
Laminate
Bearing Elements
Special
Coating:
X45Cr13
Corrotect
POM
ATC
Ceramic Al2O3
Ceramic Si3N4
Coa
Load ratings
KN
Cor
Ca
Cr
53
64
77
87
100
111
123
134
147
155
168
179
191
202
213
225
238
247
259
270
283
293
306
317
329
338
351
361
374
385
397
408
421
431
444
453
465
476
487
499
510
544
567
623
682
737
797
852
25
30
36
41
47
52
58
63
69
73
79
84
90
95
100
106
112
116
122
127
133
138
144
149
155
159
165
170
176
181
187
192
198
203
209
213
219
224
229
235
240
256
267
293
321
347
375
401
17
18
20
20
22
23
24
24
25
26
27
27
28
28
29
29
30
31
31
32
32
33
33
33
34
34
35
35
36
36
36
37
37
37
38
38
39
39
39
40
40
41
41
43
44
46
47
48
20
21
23
23
25
27
28
28
29
30
31
31
32
32
34
34
35
36
36
37
37
38
38
38
39
39
41
41
42
42
42
43
43
43
44
44
45
45
45
46
46
47
47
50
51
53
54
56
Weight
kg
0.26
0.28
0.31
0.34
0.37
0.40
0.43
0.47
0.51
0.56
0.61
0.64
0.66
0.69
0.72
0.75
0.79
0.82
0.86
0.89
0.93
0.97
1.01
1.06
1.10
1.15
1.20
1.25
1.31
1.37
1.43
1.49
1.55
1.62
1.69
1.76
1.84
1.92
2.00
2.09
2.18
2.33
2.43
2.70
3.00
3.34
3.71
4.00
Order no.
68310B
68314B
68318B
77202B
77206B
77210B
77214B
77218B
77222B
77226B
77230B
77232B
77234B
77236B
77238B
77240B
77242B
77244B
77246B
77248B
77250B
77252B
77254B
77256B
77258B
77260B
77262B
77264B
77266B
77268B
77270B
77272B
77274B
77276B
77278B
77280B
77282B
77284B
77286B
77288B
77290B
77293B
77295B
77300B
77305B
77310B
77315B
77320B
33
Bearing Elements
Type LER
Bearing Elements
Rectangular profile,
unground raceways
LER 3
KK
mm
100
120
140
160
180
200
220
240
260
280
300
320
340
360
380
400
420
440
460
480
500
520
540
560
580
600
620
640
660
680
700
720
740
760
780
800
820
840
860
880
900
960
1000
1100
1200
1300
1400
1500
34
Coa
Load ratings
KN
Cor
Ca
Cr
53
64
77
87
100
111
123
134
147
155
168
179
191
202
213
225
238
247
259
270
283
293
306
317
329
338
351
361
374
385
397
408
421
431
444
453
465
476
487
499
510
544
567
623
682
737
797
852
25
30
36
41
47
52
58
63
69
73
79
84
90
95
100
106
112
116
122
127
133
138
144
149
155
159
165
170
176
181
187
192
198
203
209
213
219
224
229
235
240
256
267
293
321
347
375
401
17
18
20
20
22
23
24
24
25
26
27
27
28
28
29
29
30
31
31
32
32
33
33
33
34
34
35
35
36
36
36
37
37
37
38
38
39
39
39
40
40
41
41
43
44
46
47
48
20
21
23
23
25
27
28
28
29
30
31
31
32
32
34
34
35
36
36
37
37
38
38
38
39
39
41
41
42
42
42
43
43
43
44
44
45
45
45
46
46
47
47
50
51
53
54
56
Weight
kg
0.2
0.2
0.2
0.3
0.3
0.3
0.4
0.4
0.4
0.4
0.5
0.5
0.5
0.5
0.5
0.7
0.7
0.7
0.7
0.7
0.8
0.9
0.9
1.0
1.0
1.1
1.1
1.2
1.2
1.3
1.3
1.4
1.5
1.5
1.6
1.6
1.7
1.7
1.8
1.8
1.9
2.0
2.0
2.2
2.4
2.6
2.8
3.0
Order no.
68460A
68464A
68468A
74062A
74066A
74070A
74074A
74078A
74082A
74086A
74090A
74092A
74094A
74096A
74098A
74100A
74102A
74104A
74106A
74108A
74110A
74112A
74114A
74116A
74118A
74120A
74122A
74124A
74126A
74128A
74130A
74132A
74134A
74136A
74138A
74140A
74142A
74144A
74146A
74148A
74150A
74153A
74155A
74160A
74165A
74170A
74175A
74180A
Materials
Race ring
Balls
Cage
Standard
54SiCr6
100Cr6
DIN 5401, G28
PA12
Non-corrosive
Brass
Bronze
Teflon
Laminate
Bearing Elements
Special
Coating:
Niro X45Cr13
Corrotect
POM
ATC
Ceramic Al2O3
Ceramic Si3N4
LER 3.5
KK
mm
400
420
440
460
480
500
520
540
560
580
600
620
640
660
680
700
720
740
760
780
800
820
840
860
880
900
960
1000
1100
1200
1300
1400
1500
Coa
329
347
362
381
396
411
429
444
463
478
496
511
530
544
563
578
593
611
626
645
660
678
693
712
727
745
794
827
909
991
1077
1158
1240
Load ratings
KN
Cor
Ca
Cr
125
132
138
145
150
156
163
169
176
181
188
194
201
207
214
219
225
232
238
245
251
258
263
270
276
283
301
314
345
376
409
440
471
25
25
25
26
26
27
27
27
28
28
29
29
29
30
30
30
30
31
31
31
32
32
32
33
33
33
34
34
36
37
38
39
40
34
35
35
36
36
37
38
38
39
39
40
40
41
41
42
42
42
43
43
44
44
44
45
45
46
46
47
48
49
51
53
54
55
Weight
kg
0.7
0.7
0.7
0.7
0.7
0.8
0.9
0.9
1.0
1.0
1.1
1.1
1.2
1.2
1.3
1.3
1.4
1.5
1.5
1.6
1.6
1.7
1.7
1.8
1.8
1.9
2.0
2.0
2.2
2.4
2.6
2.8
3.0
Order no.
69619A
69621A
69623A
69625A
69627A
69629A
69631A
69633A
69635A
69637A
69639A
69641A
69643A
69645A
69647A
69649A
69651A
69653A
69655A
69657A
69659A
69661A
69663A
69665A
69667A
69669A
69672A
69674A
69679A
69684A
69689A
69694A
69699A
35
Bearing Elements
Materials
Type LER
Bearing Elements
Rectangular profile,
unground raceways
Race ring
Balls
Cage
Standard
54SiCr6
100Cr6
DIN 5401, G28
PA12
Niro X45Cr13
POM
Ceramic Al2O3
Ceramic Si3N4
Non-corrosive
Brass
Bronze
Teflon
Special
Coating:
Corrotect
ATC
NEW
LER 5
KK
mm
400
420
440
460
480
500
520
540
560
580
600
620
640
660
680
700
720
740
760
780
800
820
840
860
880
900
960
1000
1100
1200
1300
1400
1500
36
Coa
455
480
504
527
550
576
599
623
646
672
695
712
737
763
784
808
833
856
880
903
929
952
969
992
1018
1041
1114
1154
1275
1388
1507
1628
1740
Load ratings
KN
Cor
Ca
Cr
214
226
237
248
259
271
282
293
304
316
327
335
347
359
369
380
392
403
414
425
437
448
456
467
479
490
524
543
600
653
709
766
819
44
45
46
46
47
48
49
49
50
51
52
52
53
53
54
54
55
56
56
57
57
58
58
59
59
60
61
62
64
66
68
70
72
51
52
53
53
54
56
57
57
58
59
60
60
61
61
62
62
64
65
65
66
66
67
67
68
68
69
71
72
74
76
79
81
83
Weight
kg
Order no.
1.46
1.54
1.61
1.69
1.76
1.83
1.91
1.98
2.06
2.13
2.20
2.27
2.35
2.42
2.49
2.57
2.64
2.72
2.79
2.87
2.94
3.01
3.08
3.16
3.23
3.30
3.53
3.67
4.04
4.40
4.77
5.14
5.51
68907A
68908A
68909A
68910A
68911A
68912A
68913A
68914A
68915A
68916A
68917A
68918A
68919A
68920A
68921A
68922A
68923A
68924A
68925A
68926A
68927A
68928A
68929A
68930A
68931A
68932A
68935A
68937A
68939A
68941A
68943A
68945A
68947A
Type LEG
2-ring bearing element,
unground raceways
Race ring
Balls
Cage
Standard
54SiCr6
100Cr6
DIN 5401, G28
PA12
Niro X45Cr13
POM
Ceramic Al2O3
Ceramic Si3N4
Non-corrosive
Brass
Bronze
Teflon
Special
Coating:
Corrotect
ATC
Bearing Elements
Materials
NEW
LEG
KK
mm
100
120
140
160
180
200
220
240
260
280
300
320
340
360
380
400
420
440
460
480
500
Coa
20
23
27
32
35
39
44
48
52
56
60
64
68
72
76
80
84
88
92
96
100
Load ratings
KN
Cor
Ca
19
23
27
31
35
40
43
47
51
55
59
63
67
71
75
79
83
87
91
95
99
7
7
8
8
8
9
9
9
10
10
10
10
11
11
11
11
12
12
12
12
12
Weight
kg
Order no.
Cr
11
12
12
13
14
14
15
15
16
16
16
17
17
18
18
18
19
19
19
20
20
0.09
0.10
0.12
0.14
0.15
0.17
0.19
0.20
0.22
0.24
0.26
0.27
0.29
0.31
0.32
0.34
0.36
0.38
0.39
0.41
0.43
68949A
68950A
68951A
68952A
68953A
68954A
68955A
68956A
68957A
68958A
68959A
68960A
68961A
68962A
68963A
68964A
68965A
68966A
68967A
68968A
68969A
37
Slim Bearing
Type LDD
Bearing Elements
Bearing element
with steel housing
LDD 3/8
Dimensions
inch
D
d
5.50
5.75
6.25
6.75
7.25
7.75
8.25
8.75
9.75
10.75
11.75
12.75
14.75
16.75
18.75
20.75
25.75
4.75
5.00
5.50
6.00
6.50
7.00
7.50
8.00
9.00
10.00
11.00
12.00
14.00
16.00
18.00
20.00
25.00
Load ratings
KN
Coa Cor
Ca
Cr
51
53
60
64
70
74
79
85
96
106
115
125
147
166
187
208
259
15
16
16
17
17
18
18
19
20
20
21
22
23
24
25
26
28
24
25
28
30
33
35
37
40
45
50
54
59
69
78
88
98
122
17
19
19
20
20
21
21
22
23
23
24
25
27
28
29
30
32
Weight
kg
0.15
0.16
0.16
0.19
0.21
0.22
0.24
0.25
0.29
0.32
0.35
0.38
0.44
0.50
0.56
0.63
0.78
Order no.
75067A
75068A
75069A
75070A
75071A
75072A
75073A
75074A
75075A
75076A
75077A
75078A
75079A
75080A
75081A
75082A
75083A
LDD 1/2
Dimensions
inch
D
d
7.00
7.50
8.00
8.50
9.00
10.00
11.00
12.00
13.00
15.00
17.00
19.00
21.00
26.00
38
6.00
6.50
7.00
7.50
8.00
9.00
10.00
11.00
12.00
14.00
16.00
18.00
20.00
25.00
Load ratings
KN
Coa Cor
Ca
Cr
70
74
79
87
91
102
113
123
136
157
179
202
223
278
27
28
29
30
30
31
32
34
35
37
39
40
42
45
33
35
37
41
43
48
53
58
64
74
84
95
105
131
31
32
34
35
35
36
37
39
41
43
45
46
49
52
Weight
kg
0.34
0.36
0.39
0.42
0.45
0.50
0.56
0.61
0.66
0.77
0.88
0.99
1.09
1.36
Order no.
75010A
75011A
75012A
75013A
75014A
75015A
75016A
75017A
75018A
75019A
75020A
75021A
75022A
75023A
Materials
Housings
Race ring
Balls
Cage
Standard
Ck55
54SiCr6
100Cr6
DIN 5401, G28
PA12
Niro X45Cr13
POM
Ceramic Al2O3
Ceramic Si3N4
Bearing Elements
Special
Coating:
Niro X12CrNi177
ATC
Niro X7CrNiAl177
LDD 3/4
Dimensions
inch
D
d
8.50
9.00
9.50
10.50
11.50
12.50
13.50
15.50
17.50
19.50
21.50
26.50
7.00
7.50
8.00
9.00
10.00
11.00
12.00
14.00
16.00
18.00
20.00
25.00
Load ratings
KN
Coa Cor
Ca
155
166
174
196
219
238
257
302
340
383
427
529
73
78
82
92
103
112
121
142
160
180
201
249
84
87
89
93
97
101
103
110
116
119
125
134
Weight
kg
Order no.
Cr
73
75
77
80
84
87
89
95
100
103
108
116
0.89
0.95
1.01
1.13
1.26
1.38
1.49
1.74
1.97
2.22
2.47
3.07
75032A
75033A
75034A
75035A
75036A
75037A
75038A
75039A
75040A
75041A
75042A
75043A
LDD 1
Dimensions
inch
D
d
10.00
11.00
12.00
13.00
14.00
16.00
18.00
20.00
22.00
27.00
8.00
9.00
10.00
11.00
12.00
14.00
16.00
18.00
20.00
25.00
Load ratings
KN
Coa Cor
Ca
270
300
332
361
391
463
525
587
648
803
127
141
156
170
184
218
247
276
305
378
136
143
148
154
158
169
178
185
192
207
Weight
kg
Order no.
Cr
118
124
128
133
137
146
154
160
166
179
1.81
2.01
2.26
2.47
2.67
3.09
3.54
3.96
4.41
5.45
75054A
75055A
75056A
75057A
75058A
75059A
75060A
75061A
75062A
75063A
39
Bearing Assemblies
Type LDL
Steel version
LDL steel
Bearing Assemblies
KK
mm
h1
100- 220
240- 280
300- 380
400- 480
500- 600
620- 780
800- 1500
11
15
15
18
20
20
26
6.6
9.0
9.0
11.0
14.0
14.0
18.0
30
34
38
44
49
53
60
Dimensions
mm
h2
24
27
31
37
42
45
52
k1
SD
t1
6.8
9.0
9.0
11.0
13.0
13.0
17.5
15.0
17.5
19.5
22.5
25.0
29.0
33.0
M 6
M 8
M 8
M 10
M 12
M 12
M 16
10
15
15
15
20
20
25
Bore shape A
Bore shape B
40
Bore shape C
Materials
Inner /
Outer ring
Race ring
Balls
Cage
Seals
Standard
C45N
54SiCr6
100Cr6
PA12
NBR
Special
Niro X45Cr13
Non-
Viton
Brass CuSn12
Niro X7CrNi177
POM
corrosive
Teflon
Plastic
Duratherm
Ceramic Al2O3
Bronze
Labyrinth
Magnesium
Coating:
Ceramic Si3N4
Laminate
Metal seal
Coatings
Corrotect
Brass
ATC
Teflon
KK
mm
100
120
140
160
180
200
220
240
260
280
300
320
340
360
380
400
420
440
460
480
500
520
540
560
580
600
620
640
660
680
700
720
740
760
780
800
820
840
860
880
900
960
1000
1100
1200
1300
1400
1500
d1
150
170
190
210
230
250
270
300
320
340
360
380
400
420
440
470
490
510
530
550
580
600
620
640
660
680
710
730
750
770
790
810
830
850
870
900
920
940
960
980
1000
1060
1100
1200
1300
1400
1500
1600
Diameter
mm
d2
d3
50
70
90
110
130
150
170
180
200
220
240
260
280
300
320
330
350
370
390
410
420
440
460
480
500
520
530
550
570
590
610
630
650
670
690
700
720
740
760
780
800
860
900
1000
1100
1200
1300
1400
135
155
175
195
215
235
255
280
300
320
340
360
380
400
420
445
465
485
505
525
550
570
590
610
630
650
670
690
710
730
750
770
790
810
830
865
885
905
925
945
965
1025
1065
1165
1265
1365
1465
1565
d4
65
85
105
125
145
165
185
200
220
240
260
280
300
320
340
355
375
395
415
435
450
470
490
510
530
550
570
590
610
630
650
670
690
710
730
735
755
775
795
815
835
895
935
1035
1135
1235
1335
1435
Fixing
per ring
Coa
6x
6x
6x
6x
8x
8x
8x
8x
10x
10x
12x
12x
14x
14x
14x
14x
14x
14x
14x
14x
14x
14x
16x
16x
16x
16x
22x
22x
22x
22x
22x
22x
24x
24x
24x
24x
24x
24x
24x
24x
24x
26x
26x
30x
30x
36x
36x
40x
53
66
79
91
104
115
128
142
155
166
179
191
204
215
227
272
289
302
317
329
344
357
372
385
400
412
701
725
746
767
788
818
842
863
884
1056
1090
1111
1135
1167
1190
1267
1324
1411
1587
1698
1853
1942
Load rating
KN
Cor
Ca
25
31
37
43
49
54
60
67
73
78
84
90
96
101
107
128
136
142
149
155
162
168
175
181
188
194
330
341
351
361
371
385
396
406
416
497
513
523
534
549
560
596
623
664
747
799
872
914
20
20
20
21
22
23
24
28
29
30
31
31
32
32
34
32
32
34
34
35
35
36
36
36
37
37
87
88
89
90
91
93
94
94
95
120
123
123
124
125
126
130
131
133
140
143
148
149
Cr
17
17
17
18
19
20
21
24
25
26
27
27
28
28
29
28
28
29
29
30
30
31
31
31
32
32
75
76
77
78
79
80
81
81
82
104
106
106
107
108
109
112
113
115
121
124
128
129
Weight
kg
2.5
3.0
3.5
4.0
4.5
5.0
5.5
8.1
8.8
9.4
11.6
12.4
13.2
13.9
14.7
21.6
22.7
23.7
24.8
25.9
35.0
36.4
37.8
39.2
40.6
42.0
56.9
58.8
60.7
62.5
64.4
66.3
68.0
69.9
71.8
93.9
96.3
98.7
101.1
103.5
105.9
113.0
117.8
129.6
141.6
153.1
165.1
177.0
Order no.
Bore shape
A
B
66401Y
69703Y
69709Y
73003Y
73009Y
73015Y
73021Y
73027Y
73033Y
73039Y
73045Y
73051Y
73057Y
73063Y
73069Y
73075Y
73081Y
73087Y
73093Y
73099Y
73105Y
73111Y
73117Y
73123Y
73129Y
73135Y
66141A
66144A
66147A
66150A
66153A
66156A
66159A
66162A
66165A
66168A
66171A
66174A
66177A
66180A
66183A
66192A
66198A
66386A
66389A
66392A
66395A
66398A
66402Y
69704Y
69710Y
73004Y
73010Y
73016Y
73022Y
73028Y
73034Y
73040Y
73046Y
73052Y
73058Y
73064Y
73070Y
73076Y
73082Y
73088Y
73094Y
73100Y
73106Y
73112Y
73118Y
73124Y
73130Y
73136Y
66142A
66145A
66148A
66151A
66154A
66157A
66160A
66163A
66166A
66169A
66172A
66175A
66178A
66181A
66184A
66193A
66199A
66387A
66390A
66393A
66396A
66399A
C
66403Y
69705Y
69711Y
73005Y
73011Y
73017Y
73023Y
73029Y
73035Y
73041Y
73047Y
73053Y
73059Y
73065Y
73071Y
73077Y
73083Y
73089Y
73095Y
73101Y
73107Y
73113Y
73119Y
73125Y
73131Y
73137Y
66143A
66146A
66149A
66152A
66155A
66158A
66161A
66164A
66167A
66170A
66173A
66176A
66179A
66182A
66185A
66194A
66200A
66388A
66391A
66394A
66397A
66400A
41
Bearing Assemblies
Bearing Assemblies
Type LDL
Aluminium version (anodized)
LDL aluminium
Bearing Assemblies
KK
mm
h1
100- 220
240- 280
300- 380
400- 480
500- 600
620- 780
800- 1500
11
15
15
18
20
20
26
6.6
9.0
9.0
11.0
14.0
14.0
18.0
30
34
38
44
49
53
60
Dimensions
mm
h2
24
27
31
37
42
45
52
k1
SD
t1
6.8
9.0
9.0
11.0
13.0
13.0
17.5
15.0
17.5
19.5
22.5
25.0
29.0
33.0
M 6
M 8
M 8
M 10
M 12
M 12
M 16
10
15
15
15
20
20
25
Bore shape A
Bore shape B
42
Bore shape C
Materials
Inner /
Outer ring
Race ring
Balls
Cage
Seals
Standard
AlZnMgCu05
54SiCr6
100Cr6
PA12
NBR
Special
Niro X45Cr13
Non-
Viton
Brass CuSn12
POM
corrosive
Teflon
Plastic
Duratherm
Ceramic Al2O3
Bronze
Labyrinth
Magnesium
Coating:
Ceramic Si3N4
Laminate
Metal seal
Coatings
Corrotect
Brass
ATC
Teflon
KK
mm
100
120
140
160
180
200
220
240
260
280
300
320
340
360
380
400
420
440
460
480
500
520
540
560
580
600
620
640
660
680
700
720
740
760
780
800
820
840
860
880
900
960
1000
1100
1200
1300
1400
1500
d1
150
170
190
210
230
250
270
300
320
340
360
380
400
420
440
470
490
510
530
550
580
600
620
640
660
680
710
730
750
770
790
810
830
850
870
900
920
940
960
980
1000
1060
1100
1200
1300
1400
1500
1600
Niro X7CrNi177
Diameter
mm
d2
d3
50
70
90
110
130
150
170
180
200
220
240
260
280
300
320
330
350
370
390
410
420
440
460
480
500
520
530
550
570
590
610
630
650
670
690
700
720
740
760
780
800
860
900
1000
1100
1200
1300
1400
135
155
175
195
215
235
255
280
300
320
340
360
380
400
420
445
465
485
505
525
550
570
590
610
630
650
670
690
710
730
750
770
790
810
830
865
885
905
925
945
965
1025
1065
1165
1265
1365
1465
1565
d4
65
85
105
125
145
165
185
200
220
240
260
280
300
320
340
355
375
395
415
435
450
470
490
510
530
550
570
590
610
630
650
670
690
710
730
735
755
775
795
815
835
895
935
1035
1135
1235
1335
1435
Fixing
per ring
Coa
6x
6x
6x
6x
8x
8x
8x
8x
10x
10x
12x
12x
14x
14x
14x
14x
14x
14x
14x
14x
14x
14x
16x
16x
16x
16x
22x
22x
22x
22x
22x
22x
24x
24x
24x
24x
24x
24x
24x
24x
24x
26x
26x
30x
30x
36x
36x
40x
53
66
79
91
104
115
128
142
155
166
179
191
204
215
227
272
289
302
317
329
344
357
372
385
400
412
701
725
746
767
788
818
842
863
884
1056
1090
1111
1135
1167
1190
1267
1324
1411
1587
1698
1853
1942
Load rating
KN
Cor
Ca
25
31
37
43
49
54
60
67
73
78
84
90
96
101
107
128
136
142
149
155
162
168
175
181
188
194
330
341
351
361
371
385
396
406
416
497
513
523
534
549
560
596
623
664
747
799
872
914
20
20
20
21
22
23
24
28
29
30
31
31
32
32
34
32
32
34
34
35
35
36
36
36
37
37
87
88
89
90
91
93
94
94
95
120
123
123
124
125
126
130
131
133
140
143
148
149
Cr
17
17
17
18
19
20
21
24
25
26
27
27
28
28
29
28
28
29
29
30
30
31
31
31
32
32
75
76
77
78
79
80
81
81
82
104
106
106
107
108
109
112
113
115
121
124
128
129
Weight
kg
1.0
1.2
1.4
1.6
1.8
2.0
2.2
3.1
3.4
3.6
4.5
4.8
5.1
5.4
5.7
8.0
8.4
8.8
9.2
9.6
13.0
13.5
14.0
14.5
15.0
15.6
21.1
21.8
22.5
23.2
23.9
24.6
25.2
25.9
26.6
36.1
37.0
38.0
38.9
39.9
40.8
43.5
45.3
49.9
54.5
58.9
63.5
68.4
Order no.
Bore shape
A
B
66401L
69703L
69709L
73003L
73009L
73015L
73021L
73027L
73033L
73039L
73045L
73051L
73057L
73063L
73069L
73075L
73081L
73087L
73093L
73099L
73105L
73111L
73117L
73123L
73129L
73135L
66141L
66144L
66147L
66150L
66153L
66156L
66159L
66162L
66165L
66168L
66171L
66174L
66177L
66180L
66183L
66192L
66198L
66386L
66389L
66392L
66395L
66398L
66402L
69704L
69710L
73004L
73010L
73016L
73022L
73028L
73034L
73040L
73046L
73052L
73058L
73064L
73070L
73076L
73082L
73088L
73094L
73100L
73106L
73112L
73118L
73124L
73130L
73136L
66142L
66145L
66148L
66151L
66154L
66157L
66160L
66163L
66166L
66169L
66172L
66175L
66178L
66181L
66184L
66193L
66199L
66387L
66390L
66393L
66396L
66399L
C
66403L
69705L
69711L
73005L
73011L
73017L
73023L
73029L
73035L
73041L
73047L
73053L
73059L
73065L
73071L
73077L
73083L
73089L
73095L
73101L
73107L
73113L
73119L
73125L
73131L
73137L
66143L
66146L
66149L
66152L
66155L
66158L
66161L
66164L
66167L
66170L
66173L
66176L
66179L
66182L
66185L
66194L
66200L
66388L
66391L
66394L
66397L
66400L
43
Bearing Assemblies
Bearing Assemblies
Type LDL
Steel version
with inner gear
Bearing Assemblies
KK
mm
h1
h2
100- 220
240- 280
300- 380
400- 480
500- 600
620- 780
800- 1500
11
15
15
18
20
20
26
6.6
9.0
9.0
11.0
14.0
14.0
18.0
30
34
38
44
49
53
60
24
27
31
37
42
45
52
Dimensions
mm
b
19
22
26
32
35
38
45
k1
SD
t1
6.8
9.0
9.0
11.0
13.0
13.0
17.5
15.0
17.5
19.5
22.5
25.0
29.0
33.0
M 6
M 8
M 8
M 10
M 12
M 12
M 16
10
15
15
15
20
20
25
Bore shape A
Bore shape B
44
Bore shape C
Materials
Inner /
Outer ring
Race ring
Balls
Cage
54SiCr6
100Cr6
PA12
NBR
Niro X45Cr13
Non-
Viton
Standard
42CrMo4V
C45N
Special
Brass CuSn12
Niro X7CrNi177
POM
corrosive
Teflon
Plastic
Duratherm
Ceramic Al2O3
Bronze
Labyrinth
Magnesium
Coating:
Ceramic Si3N4
Laminate
Metal seal
Coatings
Corrotect
Brass
ATC
Teflon
KK
Module
mm
m
100
120
140
160
180
200
220
240
260
280
300
320
340
360
380
400
420
440
460
480
500
520
540
560
580
600
620
640
660
680
700
720
740
760
780
800
820
840
860
880
900
960
1000
1100
1200
1300
1400
1500
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
5
5
Gears
DIN 3967
Quality 8e25
Basic profile
DIN 867
other gears
on request
Dimensions
Teeth number Permit. peripheral forces
mm
KN
d02
d2
Z
Standard
Max.
40
60
80
100
120
140
160
170
190
210
228
249
264
288
306
318
336
357
378
396
408
426
444
468
486
507
512
532
552
572
592
612
632
648
672
680
700
720
740
760
780
840
880
980
1080
1180
1280
1380
50
70
90
110
130
150
170
180
200
220
240
260
280
300
320
330
350
370
390
410
420
440
460
480
500
520
530
550
570
590
610
630
650
670
690
700
720
740
760
780
800
860
900
1000
1100
1200
1300
1400
Load rating and other dimensions as for type LDL steel design (page 41).
Other diameters and in-between sizes available on request.
20
30
40
50
60
70
80
85
95
105
76
83
88
96
102
106
112
119
126
132
136
142
148
156
162
169
128
133
138
143
148
153
158
162
168
136
140
144
148
152
156
168
176
196
216
236
256
276
4.47
4.00
3.80
3.62
3.62
3.45
3.45
4.00
3.83
3.83
7.09
7.09
7.09
6.78
6.78
8.35
8.35
8.35
8.17
8.17
8.90
8.90
8.86
8.86
8.82
8.82
12.94
12.94
12.88
12.88
12.83
12.83
12.83
12.77
12.77
19.07
19.07
19.07
18.99
18.99
18.99
18.91
18.83
18.75
18.75
18.75
18.75
18.75
8.94
8.00
7.60
7.24
7.24
6.90
6.90
8.00
7.65
7.65
14.18
14.18
14.18
13.57
13.57
16.70
16.70
16.70
16.34
16.34
17.80
17.80
17.72
17.72
17.65
17.65
25.87
25.87
25.76
25.76
25.65
25.65
25.65
25.55
25.55
38.14
38.14
38.14
37.97
37.97
37.97
37.82
37.66
37.50
37.50
37.50
37.50
37.50
Order no.
Bore shape
A
B
66401W
69703W
69709W
73003W
73009W
73015W
73021W
73027W
73033W
73039W
73045W
73051W
73057W
73063W
73069W
73075W
73081W
73087W
73093W
73099W
73105W
73111W
73117W
73123W
73129W
73135W
66141W
66144W
66147W
66150W
66153W
66156W
66159W
66162W
66165W
66168W
66171W
66174W
66177W
66180W
66183W
66192W
66198W
66386W
66389W
66392W
66395W
66398W
66402W
69704W
69710W
73004W
73010W
73016W
73022W
73028W
73034W
73040W
73046W
73052W
73058W
73064W
73070W
73076W
73082W
73088W
73094W
73100W
73106W
73112W
73118W
73124W
73130W
73136W
66142W
66145W
66148W
66151W
66154W
66157W
66160W
66163W
66166W
66169W
66172W
66175W
66178W
66181W
66184W
66193W
66199W
66387W
66390W
66393W
66396W
66399W
C
66403W
69705W
69711W
73005W
73011W
73017W
73023W
73029W
73035W
73041W
73047W
73053W
73059W
73065W
73071W
73077W
73083W
73089W
73095W
73101W
73107W
73113W
73119W
73125W
73131W
73137W
66143W
66146W
66149W
66152W
66155W
66158W
66161W
66164W
66167W
66170W
66173W
66176W
66179W
66182W
66185W
66194W
66200W
66388W
66391W
66394W
66397W
66400W
45
Bearing Assemblies
Seals
Bearing Assemblies
Type LDL
Steel version
with outer gear
Bearing Assemblies
KK
mm
h1
h2
100- 220
240- 280
300- 380
400- 480
500- 600
620- 780
800- 1500
11
15
15
18
20
20
26
6.6
9.0
9.0
11.0
14.0
14.0
18.0
30
34
38
44
49
53
60
24
27
31
37
42
45
52
Dimensions
mm
b
19
22
26
32
35
38
45
k1
SD
t1
6.8
9.0
9.0
11.0
13.0
13.0
17.5
15.0
17.5
19.5
22.5
25.0
29.0
33.0
M 6
M 8
M 8
M 10
M 12
M 12
M 16
10
15
15
15
20
20
25
Bore shape A
Bore shape B
46
Bore shape C
Materials
Inner /
Outer ring
Race ring
Balls
Cage
Standard
C45N
54SiCr6
100Cr6
PA12
NBR
42CrMo4V
Special
Niro X45Cr13
Non-
Viton
Brass CuSn12
Niro X7CrNi177
POM
corrosive
Teflon
Plastic
Duratherm
Ceramic Al2O3
Bronze
Labyrinth
Magnesium
Coating:
Ceramic Si3N4
Laminate
Metal seal
Coatings
Corrotect
Brass
ATC
Teflon
KK
Module
mm
m
100
120
140
160
180
200
220
240
260
280
300
320
340
360
380
400
420
440
460
480
500
520
540
560
580
600
620
640
660
680
700
720
740
760
780
800
820
840
860
880
900
960
1000
1100
1200
1300
1400
1500
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
5
5
Gears
DIN 3967
Quality 8e25
Basic profile
DIN 867
other gears
on request
Dimensions
Teeth number Permit. peripheral forces
mm
KN
d01
d1
Z
Standard
Max.
160
180
200
220
240
260
280
310
330
350
372
396
414
432
456
483
504
522
546
564
594
612
636
654
672
693
728
748
768
792
808
828
848
868
888
920
940
960
980
1000
1020
1080
1120
1220
1320
1420
1520
1620
150
170
190
210
230
250
270
300
320
340
360
380
400
420
440
470
490
510
530
550
580
600
620
640
660
680
710
730
750
770
790
810
830
850
870
900
920
940
960
980
1000
1060
1100
1200
1300
1400
1500
1600
Load rating and other dimensions as for type LDL steel design (page 41).
Other diameters and in-between sizes available on request.
80
90
100
110
120
130
140
155
165
175
124
132
138
144
152
161
168
174
182
188
189
204
212
218
224
231
182
187
192
198
202
207
212
217
222
184
188
192
196
200
204
216
224
244
264
284
304
324
2.92
2.92
3.04
3.04
3.04
3.04
3.04
3.52
3.52
3.52
6.24
6.24
6.24
6.24
6.24
7.68
7.68
7.68
7.68
7.68
8.40
8.40
8.40
8.40
8.40
8.40
12.16
12.16
12.16
12.16
12.16
12.16
12.16
12.16
12.16
18.00
18.00
18.00
18.00
18.00
18.00
18.00
18.00
18.00
18.00
18.00
18.00
18.00
5.85
5.85
6.08
6.08
6.08
6.08
6.08
7.04
7.04
7.04
12.48
12.48
12.48
12.48
12.48
15.36
15.36
15.36
15.36
15.36
16.80
16.80
16.80
16.80
16.80
16.80
24.32
24.32
24.32
24.32
24.32
24.32
24.32
24.32
24.32
36.00
36.00
36.00
36.00
36.00
36.00
36.00
36.00
36.00
36.00
36.00
36.00
36.00
Order no.
Bore shape
A
B
66401V
69703V
69709V
73003V
73009V
73015V
73021V
73027V
73033V
73039V
73045V
73051V
73057V
73063V
73069V
73075V
73081V
73087V
73093V
73099V
73105V
73111V
73117V
73123V
73129V
73135V
66141V
66144V
66147V
66150V
66153V
66156V
66159V
66162V
66165V
66168V
66171V
66174V
66177V
66180V
66183V
66192V
66198V
66386V
66389V
66392V
66395V
66398V
66402V
69704V
69710V
73004V
73010V
73016V
73022V
73028V
73034V
73040V
73046V
73052V
73058V
73064V
73070V
73076V
73082V
73088V
73094V
73100V
73106V
73112V
73118V
73124V
73130V
73136V
66142V
66145V
66148V
66151V
66154V
66157V
66160V
66163V
66166V
66169V
66172V
66175V
66178V
66181V
66184V
66193V
66199V
66387V
66390V
66393V
66396V
66399V
C
66403V
69705V
69711V
73005V
73011V
73017V
73023V
73029V
73035V
73041V
73047V
73053V
73059V
73065V
73071V
73077V
73083V
73089V
73095V
73101V
73107V
73113V
73119V
73125V
73131V
73137V
66143V
66146V
66149V
66152V
66155V
66158V
66161V
66164V
66167V
66170V
66173V
66176V
66179V
66182V
66185V
66194V
66200V
66388V
66391V
66394V
66397V
66400V
47
Bearing Assemblies
Seals
Bearing Assemblies
Type LDL
Aluminium version (anodized)
with toothed belt gear
Bearing Assemblies
KK
mm
Dimensions
mm
h1
h2
k1
SD
t1
100- 220
230- 290
300- 380
400- 480
500- 600
620- 780
800- 1500
11
15
15
18
20
20
26
6.6
9.0
9.0
11.0
14.0
14.0
18.0
30
34
38
44
49
53
60
24
27
31
37
42
45
52
6.8
9.0
9.0
11.0
13.0
13.0
17.5
M 6
M 8
M 8
M 10
M 12
M 12
M 16
10
15
15
15
20
20
25
Profile T10
48
Profile AT10
Profile HTD8
Materials
Inner /
Outer ring
Race ring
Balls
Cage
Seals
Standard
AlZnMgCu05
54SiCr6
100Cr6
PA12
NBR
Special
Niro X45Cr13
Non-
Viton
Brass CuSn12
POM
corrosive
Teflon
Plastic
Duratherm
Ceramic Al2O3
Bronze
Labyrinth
Magnesium
Coating:
Ceramic Si3N4
Laminate
Metal seal
Coatings
Corrotect
Brass
ATC
Teflon
Niro X7CrNi177
Gear types: also available as T5, AT5, HTD3, HTD14, T20, AT20
NEW
d2
50
70
90
110
130
150
170
180
200
220
240
260
280
300
320
330
350
370
390
410
420
440
460
480
500
520
530
550
570
590
610
630
650
670
690
700
720
740
760
780
800
860
900
1000
1100
1200
1300
1400
Dimensions
mm
d3
135
155
175
195
215
235
255
280
300
320
340
360
380
400
420
445
465
485
505
525
550
570
590
610
630
650
670
690
710
730
750
770
790
810
830
865
885
905
925
945
965
1025
1065
1165
1265
1365
1465
1565
d4
mm
T10/AT10
65
85
105
125
145
165
185
200
220
240
260
280
300
320
340
355
375
395
415
435
450
470
490
510
530
550
570
590
610
630
650
670
690
710
730
735
755
775
795
815
835
895
935
1035
1135
1235
1335
1435
159.15
178.25
200.54
219.63
238.73
261.01
280.11
311.94
331.04
350.14
372.42
394.70
413.80
432.90
455.18
480.65
502.93
522.03
544.31
563.41
592.06
611.15
633.44
652.54
671.63
693.92
728.93
748.03
767.13
789.41
808.51
827.61
846.70
868.99
888.08
919.92
939.01
958.11
980.39
999.49
1018.59
1079.07
1120.45
1219.13
1320.99
1419.66
1518.34
1620.20
160.43
178.25
198.63
219.00
236.82
259.74
280.11
310.67
331.04
348.87
371.79
394.70
412.53
430.35
453.27
478.74
501.66
522.03
542.40
562.77
593.33
611.15
631.53
651.90
672.27
692.64
728.29
748.66
766.49
789.41
807.23
827.61
845.43
868.35
886.17
919.28
939.65
957.48
980.39
998.22
1018.59
1079.71
1120.45
1217.22
1319.08
1418.39
1517.70
1619.56
63
70
78
86
93
102
110
122
130
137
146
155
162
169
178
188
197
205
213
221
233
240
248
256
264
272
286
294
301
310
317
325
332
341
348
361
369
376
385
392
400
424
440
478
518
557
596
636
66402LZ
69704LZ
69710LZ
73004LZ
73010LZ
73016LZ
73022LZ
73028LZ
73034LZ
73040LZ
73046LZ
73052LZ
73058LZ
73064LZ
73070LZ
73076LZ
73082LZ
73088LZ
73094LZ
73100LZ
73106LZ
73112LZ
73118LZ
73124LZ
73130LZ
73136LZ
66142LZ
66145LZ
66148LZ
66151LZ
66154LZ
66157LZ
66160LZ
66163LZ
66166LZ
66169LZ
66172LZ
66175LZ
66178LZ
66181LZ
66184LZ
66193LZ
66199LZ
66387LZ
66390LZ
66393LZ
66396LZ
66399LZ
HTD8
66403LZ
69705LZ
69711LZ
73005LZ
73011LZ
73017LZ
73023LZ
73029LZ
73035LZ
73041LZ
73047LZ
73053LZ
73059LZ
73065LZ
73071LZ
73077LZ
73083LZ
73089LZ
73095LZ
73101LZ
73107LZ
73113LZ
73119LZ
73125LZ
73131LZ
73137LZ
66143LZ
66146LZ
66149LZ
66152LZ
66155LZ
66158LZ
66161LZ
66164LZ
66167LZ
66170LZ
66173LZ
66176LZ
66179LZ
66182LZ
66185LZ
66194LZ
66200LZ
66388LZ
66391LZ
66394LZ
66397LZ
66400LZ
49
Bearing Assemblies
KK
mm
100
120
140
160
180
200
220
240
260
280
300
320
340
360
380
400
420
440
460
480
500
520
540
560
580
600
620
640
660
680
700
720
740
760
780
800
820
840
860
880
900
960
1000
1100
1200
1300
1400
1500
Bearing Assemblies
Type LDV
Materials
Inner /
Outer ring
Race ring
Balls
Cage
Seals
C45N
54SiCr6
100Cr6
PA12
NBR
Steel version
Preference series
Bearing Assemblies
LDV
KK
mm
Load ratings
KN
Coa Cor Ca Cr
54
110
166
429
541
654
100
200
300
400
500
600
25
52
78
202
255
308
18
24
28
48
52
56
16
21
24
41
45
49
Diameter
mm
d1
d2
d3
d4
50
150
240
330
420
520
65
165
260
355
450
550
150-0.10
250-0.10
360-0.10
470-0.15
580-0.15
680-0.15
135
235
340
445
550
650
Height
mm
h1
h2
300.3
300.3
380.4
440.5
490.5
490.5
24
24
31
37
42
42
Fixing
mm per ring
D
d
k1
11 6.6
11 6.6
15 9.0
18 11.0
20 14.0
20 14.0
6 x 6.8
8 x 6.8
12 x 9.0
14 x 11.0
14 x 13.0
16 x 13.0
Dimensions
mm
s SD t1
12.5
12.5
15.5
16.0
19.5
19.5
M 6
M 6
M 8
M 10
M 12
M 12
10
10
15
15
20
20
2.5
5.0
11.6
21.6
35.0
42.0
69715A
66276A
66277A
66278A
66865A
66866A
50
NEW
NEW
NEW
Materials
Type LDH
Inner /
Outer ring
Race ring
Balls
Cage
C45N
54SiCr6
100Cr6
PA12
Steel version
Angular ball bearings
LDH
21
26
31
36
41
KK
mm
Coa
533.4
660.4
787.4
914.4
1041.4
712
878
1050
1222
1394
Load ratings
KN
Cor
Ca
335
413
494
575
656
66
71
75
80
84
Cr
inch
d1
57
61
65
69
73
22
27
32
37
42
Diameter
mm
inch
d1
d2
558.8
685.8
812.8
939.8
1066.8
20
25
30
35
40
mm
d2
508
635
762
889
1016
Height
inch
mm
h1
h1
2
2
2
2
2
50.8
50.8
50.8
50.8
50.8
Weight
kg
11.5
14.0
16.5
19.0
21.5
Order no.
66602A
66603A
66604A
66605A
66606A
51
Bearing Assemblies
KK
inch
Rotary Tables
Materials
Type LTA
Standard
Worm
wheel
Worm
shaft
Housing
Aluminium
High-alloy
Antifriction
spring steel bearing steel
Wear-
resistant
bronze alloy
CK45N
hardened
and ground
V2A
LTA
Nominal Load ratings
Tilt
Input
Gear
Output
moment rotary speed reduction rotary speed
mm
KN
Nm
U/min
U/min
i
N2 max
A
Co
C
Com
N1 max
100
200
17.5
43.0
9
18
289
433
1800
2200
Nominal
A B EH7/ 6 deep F G G1H7/12 deep
100 85
200 175
70 45 30
160 130 110
Rotary Tables
L1
100
61
L 2
Output
torque
Nm
M2 max
5
5
54
108
S T
Weight
Order no.
kg
5.5
10.0
91800A
91801A
V W
30 155 125 65 62.5 91.5 70 96.0 65.0 61 99.5 69.5 17 2 4x6.6 39 17 4xM6
110 255 220 70 110.0 139.0 165 145.5 114.5 63 147.0 117.0 22 7 6x9.0 39 22 6xM8
Axial and radial accuracy
Positioning accuracy in angular seconds
Repeat accuracy in angular seconds
52
18
36
Input
torque
Nm
M1 max
100
200
m
sec
sec
30
160
20
30
120
14
Materials
Type LTB
High accuracy
Body material
Raceways
Balls
Worm
gear
Aluminium
ribbed
Steel-bronze
alloy
High-alloy
spring steel
Antifriction
bearing steel
LTB
125
175
265
400
1950
2550
4200
14100
Nominal
A B Cg6 DH7
125
175
265
400
125
175
265
400
110
140
310
1780
FH7
100
70 70 100
126
102 70 102
200 150
105 150
340 300 200 190 270
Nominal
Input
Gear
Output
rotary speed reduction rotary speed
U/min
U/min
i
N2 max
N1 max
2500
2500
2500
2500
360
360
360
360
150 165 75
178
82
230 250 90
380 400 100
4
4
10
12
16
16
Input
torque
Nm
M1 max
7
7
7
7
O P
4x M5
6x M6
6x M10
6x M10
4x 7.0
3x 6.6
4x 10.0
6x 11.0
X1
X2
X3
Y1
Y2
21.8
50.0
45.0
45.0
26
32
26
26
2xM4/16 deep
4xM4/13 deep
4xM5/24 deep
4xM5/24 deep
8
18
10
9
9
18
7
6
2.8
4.0
2.5
2.5
5
4
5
Output
torque
Nm
M2 max
0.7
0.9
1.5
2.0
Q R
34
31
43
43
5
4
5
5
Weight
kg
70
75
160
290
U1
Order no.
91042A
91043A
91044A
91045A
3
6
10
27
6
6
8
8
22
52
38
38
6
6
6
6
22
52
38
38
W
135
196
193
251
20
80
16
20
80
14
20
70
10
30
50
8
53
Rotary Tables
Accessories
Standard Cages
Strip cages of the LKB type
Cage size
dw
mm inch
LKB5
LKB6
LKB8
LKB9.5
LKB10
LKB11
LKB12
LKB15
LKB16
LKB20
5.0 3/16
6.0
8.0 5/16
9.5
3/8
10.0
11.0
12.0
15.0
16.0
20.0 25/32
Dimensions
mm
h
g
t
7.6
8.6
10.6
12.6
13.2
13.2
15.0
18.6
19.6
24.2
1.5
1.6
2.0
2.5
2.5
2.5
2.5
3.0
3.0
3.5
7.5
9.2
12.0
14.0
14.0
14.0
16.0
18.6
20.0
26.0
Order no.
(bulk stock)
f
0.4
0.4
0.6
0.7
0.7
0.7
0.7
0.7
0.7
0.7
78916A
78917A
78918A
78920A
78921A
78922A
78923A
78924A
78925A
78926A
Material: PA12
The strip cage is segmented into the required lengths and supplied
ready for use with balls. The number of required balls is calculated
by:
KK
Z = -1
t
Z
= number of balls
KK = ball pitch diameter
t
= ball distribution (tolerance 0.2)
Accessories
Special Cages
Flat cages of laminated cloth, non-corrosive, brass
200-399
4-6
400-799
6-8
800-1500
8-12
dw
mm
hxg
mm
h1 x g1
mm
Order no.
5.0
6.0
8.0
9.0
12.0
16.0
20.0
25.0
30.0
40.0
50.0
2 x 10
2 x 12
3 x 15
3 x 16
4 x 20
5 x 26
6 x 31
8 x 38
8 x 45
12 x 56
15 x 80
2.7 x 13
2.7 x 15
4.0 x 18
4.0 x 18
5.5 x 23
6.5 x 30
7.5 x 35
10.0 x 43
10.0 x 50
14.0 x 61
17.5 x 88
on request
Comb cages
54
Washers
Size
a
M 6
M 8
M 10
M 12
M 16
Dimensions
mm
b
d
11.0
14.7
16.4
20.3
25.4
24.4
34.2
42.3
46.0
54.0
7
9
11
13
17
5
6
7
8
11
11.0
13.5
16.0
18.0
24.0
Order no.
Gauge 0.025
0.1
0.15
0.2 0.25 0.3 0.5 1.0
mm
M 6 79015A 79034A 79035A 79036A 79037A 79038A 79039A 79040A
M 8 79041A 79023A 79042A 79000A 79026A 79043A 79044A 79045A
M 10 79046A 79012A 79010A 79011A 79047A 79048A 79049A 79050A
M 12 79118A 79051A 79052A 79053A 79054A 79055A 79056A 79065A
M 16 79119A 79024A 79066A 79057A 79058A 79059A 79060A 79061A
Seals
The bearing assemblies are equipped with the S10 collar seal as
standard. Temperature: 30 C to +80 C (NBR). Max. peripheral
speed: 5 m/s.
Profile
S
1
10
10
15
H
4.2
4.2
5.5
Dimensions
Material
mm
B10.2
D
B 0.3
5.3
5.3
8.5
3.0
3.0
4.3
0.8
0.8
1.0
Preload
mm
VL1
Perbunan 70NBR/221
Viton
Perbunan 70NBR/221
0.51.5
0.51.5
0.52.0
Weight
kg/m
Order no.
09080
46062
09190
0.026
0.026
0.051
Installation Dimensions
Profile
Installation dimensions
mm
S
c
c2
a1
10
15
5+1
8+1.5
5.5+1
9.0+1.5
3.6...4.6
6.3...7.7
a2
4.3...5.3
7.5...9.0
Groove
dimension
mm
s +0.1
t+0.2
4.2
5.5
2.8
3.9
Special seals are available on request. Franke offers Viton seals for
high temperatures or aggressive media.
55
Accessories
Technical Information
Requirements:
Spacing of the inner or outer design.
The height of the race ring bed is 0.3 to 0.5 mm smaller on
the side of the divided mating structure. This gap is needed
to insert the washers.
The divided side of the mating structure should be fixed with
a centering collar. This is the only way to guarantee the
parallelism.
Installation and set-up:
Technical Information
Bearing elements consist of two inner and two outer race rings
and a multipart, segmented cage with balls. The race rings are
divided and can, thus, be used flexibly in the diameter for
installation.
The balls correspond to quality grade 3 (DIN 5401). Only the
supplied balls may be used. If balls are lost, all the balls must be
exchanged to ensure the race characteristics of the bearing are
not impaired.
Setting the preload is an important requirement for a long
lifetime. This guarantees that all raceways are sharing the load
and the balls are running perfectly in the predetermined
positions.
56
Note:
Setting the preload is advisable, as there tolerances that need
to be compensated even with the best production.
3.1 Settings with Washers
Setting using washers is the most cost-effective and flexible
method, as this still allows readjustment of the adjustment later
on. You can order the washers by screw diameter in different
thicknesses (see accessories p. 55).
Technical Information
Then insert the cage segments with the balls and close the
bearing assembly with the two divided sides of the mating
structure (adjustment ring). Once the screws have been
tightened properly (see 4.5 Screws) and the bearing assembly
has been turned 2 to 3 times through 360, measure the space
between the inner and outer ring using a test gauge. Then the
adjustment ring is taken off again and the determined value
plus 0.02 to 0.03 mm is ground off with the grinding machine.
Requirements:
Spacing of the inner or outer design.
The height of the race ring bed is 0.3 to 0.5 mm smaller on
the side of the divided mating structure. This gap is needed
to the insert the washers.
The divided side of the mating structure can be fixed with a
centering collar to improve the parallelism of the raceways.
Note:
Setting the preload is advisable, as there are tolerances that
need to be compensated even with the best production.
57
Technical Information
Installation suggestion A:
Technical Information
The slim bearing is inserted into the mating structure and the
bearing is closed with the two divided sides of the mating
structure (adjustment ring). Once the screws have been
tightened properly (see 4.5 Screws) and the bearing has been
turned 2 to 3 times through 360, measure the space between
the inner and outer ring using a test gauge.
Then the adjustment ring is taken off again and the determined
value plus 0.02 to 0.03 mm is ground off with the grinding
machine. To ensure the parallelism is maintained between this
surface and the raceway, a suitable bearing surface should
already be chosen during design. After thorough removal of the
ground dust, the ring is refitted as described and the bearing
moves. Then check the adjustment. If this value differs by more
than 5 to 10 %, the procedure must be repeated.
58
Calculation example:
bearing assembly of type LDL, KK 500 mm, order no. 73105Y
Peripheral speed 3 m/s
Operating time approx. 16 hrs/day
Relubrication periods:
Exact determination of the periods is usage-specific and,
therefore, can only be correctly determined by trial and error
(guide values see table 1). To determine the X factor (table 2),
use the read time value in reference to the operating time of
the application.
Vu
m/s
Frequency
h
0 to < 3
3 to < 5
5 to < 8
3 to <10
5000
1000
600
200
weekly
monthly
0.002
0.003
yearly
0.004
2-3 years
0.005
Nm
8,8
Nm
12,9
10
25
49
86
210
17
41
83
145
355
M6
M8
M10
M12
M16
Quality
Technical Information
59
Technical Information
5 Rotary Tables
100 and then every 600 operating hours. This period can also
be much shorter for special applications (e.g. heavy vibrations).
4.6 Gear
Franke supplies straight gear without hardening as standard
(material 42CrMo4V) and special gears on request. The
material, design and quality can be changed at any time on
request.
The catalogue figures with regard to permitted peripheral forces
were determined using the permitted bending stress in the tooth
foot. The maximum forces relate to extreme loads, which occur
in the event of brief impact loads such as starting and braking.
These values are for guidance purposes only and can only
be determined through a gear calculation, including both
components pinion and bearing assembly.
5.3 Lubrication
The tolerance values T = IT6 or T = IT7 relate to the diameterdependent basic tolerances in accordance with DIN ISO 286
see table 4).
Lubrication point
Technical Information
Franke Rotary Tables have a high load capacity and are ideally
suited for assembly, measuring and inspecting tasks. All Rotary
Tables have a compact aluminium housing with integrated
Franke components. A worm gear pair guarantees high
accuracy also for permanent loading. The Rotary Tables
are extremely tip-resistant with a low own weight. Precise
technical details are on the relevant pages in the catalogue.
80...
120...
180...
250...
315...
400...
500...
630...
800...
1000...
1250...
120
180
250
315
400
500
630
800
1000
1250
1600
Table 4: Tolerances
Basic tolerances
m
m
IT6
IT7
22
25
29
32
36
40
44
50
56
66
78
35
40
46
52
57
63
70
80
90
105
125
DIN ISO 286 T1 (11.90)
LTA100
LTA200
LTB125
LTB175
LTB265
LTB400
5.4 Options
One or two inductive proximity switches, integrated inside
the table
Freely positionable trips
Adaptor sets for motors at customers request
Motorisation depending on application with step or
servo motors
Rotary encoder on the second shaft extension of the
worm shaft
Complete automation solutions
Please follow assembly and maintenance instructions.
They are included with every delivery.
60
10
0.08
0.07
0.06
0.04
0.03
0.02
0.01
0
14
12
10
50
100
150
200
250
300
KK
100
90
90
80
80
70
16 mm
60
50
12 mm
40
30
9.525 mm
20
10
1250
1500
KK
LDD 3/8
LDD 1/2
4.75
10
15
20
25
KK
LDD 1
70
60
50
40
LDD 3/4
30
20
10
100
200
300
400
500
600
KK
0.10
675
0.09
600
16 mm
525
4.75
10
15
20
25
KK
0.08
0.07
450
0.06
375
0.05
300
mm Type LDD
750
0.04
225
0.03
12 mm
150
0.02
9.525 mm
75
0
1000
Nm Type LDD
100
750
500
5 mm
250
18
Nm Type LDD
16
Special
0.05
Standard
0.09
20
8 mm
800
1000
1200
1400
0.01
1600
1800
KK
4.75
10
15
20
25
KK
61
Technical Information
mm Type LEL
0.10
Technical Information
0.20
90
0.18
80
16 mm Steel
70
60
16 mm
Alu
40
30
9.525 mm Steel
20
0.14
0.10
0.08
0.06
0.04
10
0.02
9.525 mm Alu
100 200
300
400
500
600
700 KK
20 mm Steel
400
400
500
600
KK
22.5
15.0
12.5
200
10.0
150
7.5
100
5.0
50
2.5
800 900
mm Type LDL
1400 KK
0.10
21
mm Type LDH
26
31
36
41
KK
0.10
Standard
0.09
0.09
0.08
0.08
0.07
0.07
0.06
0.06
Special
0.05
0.05
0.04
0.04
0.03
0.03
0.02
0.02
0.01
0.01
250
500
750
1000
1250
1500
KK
Nm Type LDV
25.0
22.5
20.0
17.5
15.0
12.5
10.0
7.5
5.0
2.5
62
300
Nm Type LDH
250
200
17.5
20 mm Alu
300
100
20.0
350
25.0
450
Technical Information
0.16
0.12
50
mm Type LDV
100
100
200
300
400
500
600
KK
21
26
31
36
41
KK
Technical Information
Notes
63
64
Components
FDA
FDB
FDC
FDD
FDE
Standard
Low cost
Non-corrosive
Non-magnetic
Lubricant-free
Aluminium body material for cassettes, roller shoes and guide raceways
Plastic wiper with felt insert on both front sides of the cassettes or roller shoes
Steel raceways
Steel raceways
Non-corrosive
Non-magnetic
Needle bearing
Ball bearing rollers
raceways
raceways
rollers
Needle bearing non Needle bearing
corrosive rollers
rollers
Options
Advantages
Use
For medium
loads in moist
or aggressive
environment
Steel raceways
Lubricant-free
rollers
Lubricant-free
and clean
Sizes (mm)
Standard
Special
12 45
15 45
12 45
Sizes and special shapes for series production at customers request
25
12 45
Travelling speed
Vmax (m/s)
Acceleration (m/s2)
10
40
10
40
2
10
1
10
4000
4000
Can be continuously coupled for longer stroke
4000
4000
4000
78 79
82 83
84 85
86 87
More on page
65
10
40
80 81
FDG
FDH
FPA
FRA
Non-corrosive
low cost
High dynamic
Standard
Standard
Complete multi-axle
systems
Mounting angle
Measuring systems
Special sizing and bore
shapes available for series
production
High stiffness
High load capacity
High moment load rating
All-round sealing
Relubrication possible via
funnel-type lubricating nipple
Lubrication connection
possible on 4 sides
Free choice of
motorisation
Non-corrosive
raceways
Ball bearing noncorrosive rollers
Steel raceways
2-row bearing
rollers
Corrosion-resistant
Reasonable price
Fast response
behaviour
12 45
25 45
25
06 13
15 35
10
40
10
40
3
40
3
30
10
40
4000
4000
4000
continuously coupled
4000
continuously coupled
7000
88 89
90 91
92 93
94 95
96 101
66
Recirculating Rollers
Franke Power
Linear Systems
Page
Standard
Low cost
Non-corrosive
Non-magnetic
Lubricant-free
Non-corrosive low cost
High dynamic
78 79
80 81
82 83
84 85
86 87
88 89
90 91
Franke Power
Type FPA
Standard
92 93
Franke Robust
Type FRA
Standard
94 95
96 97
98 99
100 101
Accessories
Guides
Modules
102 103
104 105
Technical Information
Franke Dynamic
Franke Power
Franke Robust
Linear Tables/Modules
106 109
109 111
112 113
114
Technical Information
Accessories
Linear Tables/Modules
FTB
Standard
FTC
Standard
FTD
High dynamic
Linear Tables/Modules
Franke Robust
Franke Power
Franke Dynamic
Type FDA
Type FDB
Type FDC
Type FDD
Type FDE
Type FDG
Type FDH
Franke Dynamic
67
In Medical Technology:
Dental X-Ray Equipment
In Plant Engineering:
Packaging Machines
The Features:
The Franke Dynamic Aluminium Roller Guide has lifetime
lubrication.
Sealed rollers prevent the lubricant escaping.
The guides running is silent, smooth and even.
Preloading the cassette ensures vibration-free movement
of the secondary light.
The Features:
The Franke Dynamic Aluminium Roller Guide is
maintenance-free and requires no relubrication.
No lubricant can escape from the encapsulated rollers.
The guide is available in a completely lubricant-free
design on request.
68
The Features:
The guide is insensitive to moisture.
Its running is easy and silent, the drive power is low.
No maintenance and lubrication for the whole lifetime
are guaranteed.
An integrated wiper fulfils the specific hygiene
requirements for food production.
The product is available in a lubricant-free version
on request.
The Features:
The Franke Dynamic Aluminium Roller Guide is in a
position to realise speeds up to 10 m/s.
Several guides can be coupled for any length of stroke
desired.
A good lifetime and service performance are achieved
through central lubrication of the cassette.
69
The Features:
High accelerations up to 70 m/s are possible.
The Franke Dynamic Aluminium Roller Guide guarantees
precise repeat accuracies of +/0.01 mm.
Positioning of workpieces is quick and precise.
The guides low space requirement facilitates the compact
design of the linear drive.
No maintenance and cleanliness are guaranteed.
The Features:
The Franke Dynamic Aluminium Roller Guide has smooth,
even running.
It weighs very little as the body material of the rail is
aluminium.
Special borings guarantee connection to the path
measuring system.
70
In Machinery:
Ring and Drum Coilers
In Machinery:
Handling System
The Features:
The Franke Power Aluminium Roller Guide has high
load-capacity and stiffness.
The cassettes are completely sealed and are also suitable
for harsh conditions.
Integrated metal wipers keep the raceways clean.
The Features:
Transfer speeds of up to 3 m/s and accelerations of up to
30 m/s are achieved.
The Franke Robust Aluminium Recirculating Ball Guides
used have a high lifetime, even in harsh and very dirty
conditions.
Tolerances and unevenness in the substructure can be
equalised to a certain extent.
71
Franke Dynamic
Aluminium Roller Guide Advantages and Characteristics
Type FDA FDH
Profiled raceways
The Characteristics:
Cassettes and Roller Shoes
The cassette of the Franke Dynamic Aluminium Roller Guide has
aluminium body material with needle or ball bearing rollers of
steel or non-corrosive. Special cover discs on the roller seal the
bearing to the outside.
Eight rollers in O-formation guarantee an equally high load
capacity from all directions. The rollers are equipped with a
groove, which is adjusted to the profile of the raceway. Thanks
to this patented system of guided rolls, the rollers are guided
laterally and equally smooth and silent running is guaranteed.
The cassette plate has mounting holes in accordance with
international standards. The slide resistance can be adjusted
up and down individually using a setting screw on the side.
Five standard sizes are available from size 12 to 45.
72
The Advantages:
Low weight thanks to aluminium body material
Silent and easy running thanks to the patented Guided Roller
Maintenance-free and clean
O-formation for equal loads from all directions
High traverse speed and acceleration
Numerous variations for almost any application
Customer-specific solutions if series needed
Wipers
The bearings of the rollers are sealed and have lifetime
lubrication. Thanks to the standard felt wiper, lasting
protection of the guide system from soiling is guaranteed.
Metal wipers are included as accessories, which are
particularly recommended for coarse dirt such as chippings
or sawdust and keep the raceway clean (see accessories
page 102).
Lubricant-free cassettes and roller shoes are available as type
FDE. They are also suitable for hygienically sensitive sectors,
for example the food industry or medical technology.
Guide Rails
The raceways of spring steel, non-corrosive or non-magnetic
steel are integrated in the aluminium profile. The O-formation
guarantees high load capacity from all directions. The profile
of the rollers is adjusted to the raceway and guarantees
permanently precise and smooth running.
The guide rails are available in one piece up to a length of four
meters. They can be continuously coupled for longer strokes.
We can supply bore shapes specially tailored to your design
on request.
Franke precision raceways of spring steel, non-corrosive or
non-magnetic steel can be integrated into a variety of aluminium
profiles. We can supply your chosen profile complete with
integrated raceways in series production.
We also offer specially hardened raceways for the heaviest
loads.
73
Franke Dynamic
Aluminium Roller Guide Numerous Possibilities
Standard
Type FDB
Low cost
Type FDC
Non-corrosive
Type FDD
Non-magnetic
Type FDE
Lubricant-free
Type FDG
Type FDH
High dynamic
Further Possibilities:
Design
For series production it is possible to adjust the shape and
design of the cassettes, roller shoes and guide profiles to your
individual application. You will get the perfect solution tailored
to your requirements.
Adjustment options are:
Shortened or extended roller shoes/cassettes
Special shapes, e.g. for integration of drives
Special profiles of guide rails according to your needs
Individual bore shapes on the guide rails
Fixing from underneath
74
Vacuum/High Temperature
We also offer special cassettes and roller shoes for applications
in vacuums. They are designed with free borings and equipped
with lubricants suited to high vacuums on request.
You can choose from a selection of special, heat-resistant
cassettes and roller shoes for applications with radiant heat in
the vicinity of heat sources.
Temperature ranges up to 200 C are possible.
Complete Systems
The Franke Dynamic Aluminium Roller Guides are also used
in our complete systems of linear axle, drive, motorisation
and control. Franke Linear Modules and Linear Tables use the
assets of Linear Systems to build-up complete moving units.
Clean Room
The Franke Dynamic Aluminium Roller Guide was appraised
and evaluated at the Institut fr Produktionstechnik und
Automatisierung (IPA) at the Fraunhofer Gesellschaft (FhG)
in Stuttgart with regard to its operation in rooms with high
air purity rates.
75
Franke Power
Aluminium Recirculating Roller Guide
Type FPA
The Advantages:
Rollers in
O-formation
Profiled raceways
The Characteristics:
Cassette
The cassette of the Franke Power Aluminium Recirculating
Roller Guide is made from special aluminium with fixing bores
in accordance with international standards and, therefore,
is interchangeable with products from many manufacturers.
Wear-resistant plastic seals provide all-round sealing for the
cassette. The additional frontal metal wipers are adjusted
to the rail contour and protect the guide system from coarse
impurities.
The recirculating rollers in 90-formation guarantee even,
high load capacity and loading from every direction. Each
cassette has a lubrication nipple, which can be attached to
one of the four front ends. A defined slide resistance ensures
alignment on the guide rails. It is supplied with a preload class
with light preload. The guides can be mounted on unprocessed
surfaces without impairing the lifetime. The inner elasticity of
the Recirculating Roller Guide is ensured by a system patented
by Franke.
76
Guide Rails
Raceways of spring steel, non-corrosive or non-magnetic
steel are integrated in the aluminium profile. High load capacity
from all directions is guaranteed by the O-formation. The profile
of the rollers is adjusted to the raceway and ensures precise
and easy running permanently.
The guide rails can be supplied as one piece up to a length of
four meters and can be coupled together endlessly for longer
strokes. We can supply bore shapes specially tailored to your
design on request.
Franke Robust
Aluminium Recirculating Ball Guide
Type FRA
The Advantages:
Recirculating ball
element with
steel body
Ground raceways
The Characteristics:
Recirculating Element
The Franke Robust Recirculating Ball Guide proves itself in the
most diverse applications and industries. It works reliably in
machinery, in robotics, portals and in transport.
The recirculating elements have a compact and robust design.
The balls are kept apart by plastic wipers, which prevents any
friction. The result: good running performance and long lifetime.
The recirculating elements are screwed directly to the mating
structure. By using individual rails, the range of the guide can be
selected completely freely and adjusts to your specifications.
Guide Rails
The high load capacity of the guide results from precise
adjustment of the raceways to the balls. Embedded raceways
of spring steel or non-corrosive adjust to the load and can
be exchanged as needed. Thus, complete raceways can be
replaced cheaply without dismantling the rails.
Light-weight aluminium components are the best choice on
large robots or handling portals. The Franke Robust Aluminium
Recirculating Ball Guides combine light-weight construction
with high load capacity and precision.
The inner elasticity of the guide system means tolerances in
the substructure of the portals or vibrations can be equalised.
77
Franke Dynamic
Type FDA
Franke Dynamic
Dimensions
Size
12
15
20
25
35
45
B1
B2
D1
D2
37
47
63
70
100
120
64
78
92
98
135
165
19
24
30
36
48
60
12.0
15.5
21.0
23.0
32.0
45.0
12.50
15.75
21.00
23.50
34.00
37.50
3.4
4.5
5.5
6.6
9.0
11.0
6
8
10
11
15
18
M 4
M 5
M 6
M 8
M 10
M 12
Dimensions
mm
E1
E2
25
30
40
45
62
80
30
38
53
57
82
100
H1
H2
H3
H4
L2
L3
T1
14.7
18.7
22.6
27.0
37.0
46.0
4.0
5.0
7.0
8.5
10.5
13.5
1.4
2.0
2.0
2.5
3.5
4.0
5.5
8.0
11.0
13.0
20.0
22.0
10
10
10
10
12
16
40
60
60
60
80
105
5.5
6.0
8.0
10.0
11.5
14.5
8
10
12
16
20
24
Load ratings
N
C
Co
2800
4200
5400
9000
12500
21200
3000
3400
5400
10100
18000
25900
Order numbers
25
45
76
142
294
678
43
58
111
222
559
983
78
40
72
111
198
388
806
Weight
kg
Cassette
rail/m
0.1
0.2
0.4
0.5
1.4
2.5
0.4
0.8
0.9
1.8
3.2
5.5
Cassette
Double rail
84494A
84396A
84441A
84363A
84364A
84365A
e.g. FDA25D1500
Type
Length in mm**
Double rail
Size
Materials
Body material
Standard
High-strength,
Antifriction
anodized
bearing steel
aluminium
Rollers
Wipers
Plastic plate
with felt wiper
Franke Dynamic
Dimensions
Size
12
15
20
25
35
45
B5
H5
B3
B4
D3
D4 D5
E3
24.4
30.9
40.9
48.4
68.9
82.4
15.0
19.0
23.0
27.5
37.5
46.5
12.00
15.25
20.00
25.00
35.00
45.00
11.9
15.2
20.4
22.9
32.9
36.4
M3
M4
M5
M5
M6
M8
8
10
10
14
14
14
3.4
4.4
4.9
6.4
8.9
9.9
3
4
4
6
6
6
Dimensions
mm
E4
E5
29
34
42
48
67
83
57
68
80
84
117
146
E6
E7
E8
E9
H6
T3
9.7
12.4
16.9
19.4
28.4
30.9
3.4
4.9
5.9
7.4
8.9
9.9
5.5
7.0
9.5
12.0
17.0
22.0
4.9
5.9
5.9
8.9
8.9
8.9
4
5
5
7
7
7
6.0
7.5
8.0
5.0
7.5
9.5
4.5
5.0
7.5
10.5
12.5
15.5
9.5
12.5
16.0
17.5
26.0
31.0
Order numbers
Weight
kg
RSP
rail/m
0.07
0.12
0.23
0.34
0.99
1.79
0.4
0.8
1.0
1.9
3.5
5.6
RSP
84495A
84395A
84442A
84367A
84368A
84369A
e.g. FDA25E1500
Type
Length in mm**
Single rail
Size
79
Franke Dynamic
Type FDB
Franke Dynamic
Dimensions
Size
12
15
20
25
35
45
B1
B2
D1
D2
37
47
63
70
100
120
64
78
92
98
135
165
19
24
30
36
48
60
12.0
15.5
21.0
23.0
32.0
45.0
12.50
15.75
21.00
23.50
34.00
37.50
3.4
4.5
5.5
6.6
9.0
11.0
6
8
10
11
15
18
M 4
M 5
M 6
M 8
M 10
M 12
Dimensions
mm
E1
E2
25
30
40
45
62
80
30
38
53
57
82
100
H1
H2
H3
H4
L2
L3
T1
14.7
18.7
22.6
27.0
37.0
46.0
4.0
5.0
7.0
8.5
10.5
13.5
1.4
2.0
2.0
2.5
3.5
4.0
5.5
8.0
11.0
13.0
20.0
22.0
10
10
10
10
12
16
40
60
60
60
80
105
5.5
6.0
8.0
10.0
11.5
14.5
8
10
12
16
20
24
Load ratings
N
C
Co
620
700
940
1500
3100
6300
170
230
300
700
1400
2700
Order numbers
5.7
7.5
13.0
23.0
72.0
200.0
2.4
4.0
6.0
15.0
42.0
103.0
80
8.9
12.0
19.0
32.0
95.0
238.0
Weight
kg
Cassette
rail/m
0.1
0.2
0.4
0.5
1.4
2.5
0.4
0.8
0.9
1.8
3.2
5.5
Cassette
Double rail
84494L
84396L
84441L
84363L
84364L
84365L
e.g. FDA25D1500
Type
Length in mm**
Double rail
Size
Materials
Body material
Standard
High-strength,
Antifriction
anodized
bearing steel
aluminium
Rollers
Wipers
Plastic plate
with felt wiper
Franke Dynamic
Dimensions
Size
12
15
20
25
35
45
B5
H5
B3
B4
D3
D4 D5
E3
24.4
30.9
40.9
48.4
68.9
82.4
15.0
19.0
23.0
27.5
37.5
46.5
12.00
15.25
20.00
25.00
35.00
45.00
11.9
15.2
20.4
22.9
32.9
36.4
M3
M4
M5
M5
M6
M8
8
10
10
14
14
14
3.4
4.4
4.9
6.4
8.9
9.9
3
4
4
6
6
6
Dimensions
mm
E4
E5
29
34
42
48
67
83
57
68
80
84
117
146
E6
E7
E8
E9
H6
T3
9.7
12.4
16.9
19.4
28.4
30.9
3.4
4.9
5.9
7.4
8.9
9.9
5.5
7.0
9.5
12.0
17.0
22.0
4.9
5.9
5.9
8.9
8.9
8.9
4
5
5
7
7
7
6.0
7.5
8.0
5.0
7.5
9.5
4.5
5.0
7.5
10.5
12.5
15.5
9.5
12.5
16.0
17.5
26.0
31.0
Load ratings
N
C
Co
Order numbers
Moment load ratings* RSP
Nm
Mocx
Mcx Mocy/Mocz Mcy/Mcz
2.4
4.0
6.0
15.0
42.0
103.0
8.9
12.0
19.0
32.0
95.0
238.0
Weight
kg
RSP
rail/m
0.07
0.12
0.23
0.34
0.99
1.79
0.4
0.8
1.0
1.9
3.5
5.6
RSP
84495L
84395L
84442L
84367L
84368L
84369L
e.g. FDA25E1500
Type
Length in mm**
Single rail
Size
81
Franke Dynamic
Type FDC
Franke Dynamic
Dimensions
Size
12
15
20
25
35
45
B1
B2
D1
D2
37
47
63
70
100
120
64
78
92
98
135
165
19
24
30
36
48
60
12.0
15.5
21.0
23.0
32.0
45.0
12.50
15.75
21.00
23.50
34.00
37.50
3.4
4.5
5.5
6.6
9.0
11.0
6
8
10
11
15
18
M 4
M 5
M 6
M 8
M 10
M 12
Dimensions
mm
E1
E2
25
30
40
45
62
80
30
38
53
57
82
100
H1
H2
H3
H4
L2
L3
T1
14.7
18.7
22.6
27.0
37.0
46.0
4.0
5.0
7.0
8.5
10.5
13.5
1.4
2.0
2.0
2.5
3.5
4.0
5.5
8.0
11.0
13.0
20.0
22.0
10
10
10
10
12
16
40
60
60
60
80
105
5.5
6.0
8.0
10.0
11.5
14.5
8
10
12
16
20
24
Load ratings
N
C
Co
1100
2700
4300
5800
10000
17000
1200
3000
5000
8300
14500
20400
Order numbers
10
29
61
92
237
542
17
52
103
184
452
774
82
16
46
89
128
312
645
Weight
kg
Cassette
rail/m
0.1
0.2
0.4
0.5
1.4
2.5
0.4
0.8
0.9
1.8
3.2
5.5
Cassette
Double rail
84494AN
84396AN
84441AN
84363AN
84364AN
84365AN
e.g. FDC25D1500
Type
Length in mm**
Double rail
Size
Materials
Body material
Standard
High-strength,
Antifriction
anodized
bearing steel
aluminium
Rollers
Wipers
Plastic plate
with felt wiper
Franke Dynamic
Dimensions
Size
12
15
20
25
35
45
B5
H5
B3
B4
D3
D4 D5
E3
24.4
30.9
40.9
48.4
68.9
82.4
15.0
19.0
23.0
27.5
37.5
46.5
12.00
15.25
20.00
25.00
35.00
45.00
11.9
15.2
20.4
22.9
32.9
36.4
M3
M4
M5
M5
M6
M8
8
10
10
14
14
14
3.4
4.4
4.9
6.4
8.9
9.9
3
4
4
6
6
6
Dimensions
mm
E4
E5
29
34
42
48
67
83
57
68
80
84
117
146
E6
E7
E8
E9
H6
T3
9.7
12.4
16.9
19.4
28.4
30.9
3.4
4.9
5.9
7.4
8.9
9.9
5.5
7.0
9.5
12.0
17.0
22.0
4.9
5.9
5.9
8.9
8.9
8.9
4
5
5
7
7
7
6.0
7.5
8.0
5.0
7.5
9.5
4.5
5.0
7.5
10.5
12.5
15.5
9.5
12.5
16.0
17.5
26.0
31.0
Order numbers
Weight
kg
RSP
rail/m
0.07
0.12
0.23
0.34
0.99
1.79
0.4
0.8
1.0
1.9
3.5
5.6
RSP
84495AN
84395AN
84442AN
84367AN
84368AN
84369AN
e.g. FDC25E1500
Type
Length in mm**
Single rail
Size
83
Franke Dynamic
Type FDD
Franke Dynamic
Dimensions
Size
25
B1
B2
D1
D2
70
98
36
23.0
23.50
6.6
11
M 8
Dimensions
mm
E1
E2
45
57
H1
H2
H3
H4
L2
L3
T1
27.0
8.5
2.5
13.0
10
60
10.0
16
Load ratings
N
C
Co
1200
1600
Order numbers
18
35
25
Weight
kg
Cassette
rail/m
0.5
1.8
Double rail
e.g. FDD25D1500
Type
Length in mm**
Double rail
Size
*There is more information on moment load ratings on page 106/107.
84
Materials
Body material
Standard
High-strength,
Antifriction
anodized
bearing steel
aluminium
Rollers
Wipers
Plastic plate
with felt wiper
Franke Dynamic
Dimensions
Size
B5
25
48.4
H5
B3
B4
D3
D4 D5
E3
27.5
25.00
22.9
M5
14
6.4
Dimensions
mm
E4
E5
48
84
E6
E7
E8
E9
H6
T3
19.4
7.4
12.0
8.9
5.0
10.5
17.5
Load ratings
N
C
Co
1200
1600
Order numbers
Moment load ratings* RSP
Nm
Mocx
Mcx Mocy/Mocz Mcy/Mcz
0.8(B+ 58.4)
0.6(B+ 58.4)
35
25
Weight
kg
RSP
rail/m
0.34
1.9
Type
Length in mm**
Single rail
Size
*There is more information on moment load ratings on page 106/107.
85
Franke Dynamic
Type FDE
Franke Dynamic
Dimensions
Size
12
15
20
25
35
45
B1
B2
D1
D2
37
47
63
70
100
120
64
78
92
98
135
165
19
24
30
36
48
60
12.0
15.5
21.0
23.0
32.0
45.0
12.50
15.75
21.00
23.50
34.00
37.50
3.4
4.5
5.5
6.6
9.0
11.0
6
8
10
11
15
18
M 4
M 5
M 6
M 8
M 10
M 12
Dimensions
mm
E1
E2
25
30
40
45
62
80
30
38
53
57
82
100
H1
H2
H3
H4
L2
L3
T1
14.7
18.7
22.6
27.0
37.0
46.0
4.0
5.0
7.0
8.5
10.5
13.5
1.4
2.0
2.0
2.5
3.5
4.0
5.5
8.0
11.0
13.0
20.0
22.0
10
10
10
10
12
16
40
60
60
60
80
105
5.5
6.0
8.0
10.0
11.5
14.5
8
10
12
16
20
24
Load ratings
N
C
Co
350
600
700
1200
2000
4400
400
700
900
1600
2500
5500
Order numbers
3
6
9
18
44
140
6
12
17
35
76
210
86
5
10
14
25
58
170
Weight
kg
Cassette
rail/m
0.1
0.2
0.4
0.5
1.4
2.5
0.4
0.8
0.9
1.8
3.2
5.5
Cassette
Double rail
84494T
84396T
84441T
84363T
84364T
84365T
e.g. FDA25D1500
Type
Length in mm**
Double rail
Size
Materials
Body material
Standard
High-strength,
Antifriction
anodized
bearing steel
aluminium
Rollers
Wipers
Plastic plate
with felt wiper
Franke Dynamic
Dimensions
Size
12
15
20
25
35
45
B5
H5
B3
B4
D3
D4 D5
E3
24.4
30.9
40.9
48.4
68.9
82.4
15.0
19.0
23.0
27.5
37.5
46.5
12.00
15.25
20.00
25.00
35.00
45.00
11.9
15.2
20.4
22.9
32.9
36.4
M3
M4
M5
M5
M6
M8
8
10
10
14
14
14
3.4
4.4
4.9
6.4
8.9
9.9
3
4
4
6
6
6
Dimensions
mm
E4
E5
29
34
42
48
67
83
57
68
80
84
117
146
E6
E7
E8
E9
H6
T3
9.7
12.4
16.9
19.4
28.4
30.9
3.4
4.9
5.9
7.4
8.9
9.9
5.5
7.0
9.5
12.0
17.0
22.0
4.9
5.9
5.9
8.9
8.9
8.9
4
5
5
7
7
7
6.0
7.5
8.0
5.0
7.5
9.5
4.5
5.0
7.5
10.5
12.5
15.5
9.5
12.5
16.0
17.5
26.0
31.0
Load ratings
N
C
Co
350
600
700
1200
2000
4400
400
700
900
1600
2500
5500
Order numbers
Moment load ratings* RSP
Nm
Mocx
Mcx Mocy/Mocz Mcy/Mcz
0.20(B+ 30.3)
0.35(B+ 36.5)
0.40(B+ 47.0)
0.80(B+ 58.4)
1.20(B+ 85.0)
2.70(B+ 109.0)
0.20(B+ 30.3)
0.30(B+ 36.5)
0.33(B+ 47.0)
0.60(B+ 58.4)
0.90(B+ 85.0)
2.20(B+ 109.0)
6
12
17
35
76
210
5
10
14
25
58
170
Weight
kg
RSP
rail/m
0.07
0.12
0.23
0.34
0.99
1.79
0.4
0.8
1.0
1.9
3.5
5.6
RSP
84495T
84395T
84442T
84367T
84368T
84369T
e.g. FDA25E1500
Type
Length in mm**
Single rail
Size
87
Franke Dynamic
Type FDG
Franke Dynamic
Dimensions
Size
12
15
20
25
35
45
B1
B2
D1
D2
37
47
63
70
100
120
64
78
92
98
135
165
19
24
30
36
48
60
12.0
15.5
21.0
23.0
32.0
45.0
12.50
15.75
21.00
23.50
34.00
37.50
3.4
4.5
5.5
6.6
9.0
11.0
6
8
10
11
15
18
M 4
M 5
M 6
M 8
M 10
M 12
Dimensions
mm
E1
E2
25
30
40
45
62
80
30
38
53
57
82
100
H1
H2
H3
H4
L2
L3
T1
14.7
18.7
22.6
27.0
37.0
46.0
4.0
5.0
7.0
8.5
10.5
13.5
1.4
2.0
2.0
2.5
3.5
4.0
5.5
8.0
11.0
13.0
20.0
22.0
10
10
10
10
12
16
40
60
60
60
80
105
5.5
6.0
8.0
10.0
11.5
14.5
8
10
12
16
20
24
Load ratings
N
C
Co
620
700
940
1500
3100
6300
170
230
300
700
1400
2700
Order numbers
5.7
7.5
13.0
23.0
72.0
200.0
2.4
4.0
6.0
15.0
42.0
103.0
88
8.9
12.0
19.0
32.0
95.0
238.0
Weight
kg
Cassette
rail/m
0.1
0.2
0.4
0.5
1.4
2.5
0.4
0.8
0.9
1.8
3.2
5.5
Cassette
Double rail
84494LN
84396LN
84441LN
84363LN
84364LN
84365LN
e.g. FDC25D1500
Type
Length in mm**
Double rail
Size
Materials
Body material
Standard
High-strength,
Antifriction
anodized
bearing steel
aluminium
Rollers
Wipers
Plastic plate
with felt wiper
Franke Dynamic
Dimensions
Size
12
15
20
25
35
45
B5
H5
B3
B4
D3
D4 D5
E3
24.4
30.9
40.9
48.4
68.9
82.4
15.0
19.0
23.0
27.5
37.5
46.5
12.00
15.25
20.00
25.00
35.00
45.00
11.9
15.2
20.4
22.9
32.9
36.4
M3
M4
M5
M5
M6
M8
8
10
10
14
14
14
3.4
4.4
4.9
6.4
8.9
9.9
3
4
4
6
6
6
Dimensions
mm
E4
E5
29
34
42
48
67
83
57
68
80
84
117
146
E6
E7
E8
E9
H6
T3
9.7
12.4
16.9
19.4
28.4
30.9
3.4
4.9
5.9
7.4
8.9
9.9
5.5
7.0
9.5
12.0
17.0
22.0
4.9
5.9
5.9
8.9
8.9
8.9
4
5
5
7
7
7
6.0
7.5
8.0
5.0
7.5
9.5
4.5
5.0
7.5
10.5
12.5
15.5
9.5
12.5
16.0
17.5
26.0
31.0
Load ratings
N
C
Co
620
700
940
1500
3100
6300
170
230
300
700
1400
2700
Order numbers
Moment load ratings* RSP
Nm
Mocx
Mcx Mocy/Mocz Mcy/Mcz
0.08(B+ 30.3)
0.10(B+ 36.5)
0.15(B+ 47.0)
0.35(B+ 58.4)
0.70(B+ 85.0)
1.40(B+ 109.0)
0.30(B+ 30.3)
0.35(B+ 36.5)
0.50(B+ 47.0)
0.70(B+ 58.4)
1.50(B+ 85.0)
3.10(B+ 109.0)
2.4
4.0
6.0
15.0
42.0
103.0
8.9
12.0
19.0
32.0
95.0
238.0
Weight
kg
RSP
rail/m
0.07
0.12
0.23
0.34
0.99
1.79
0.4
0.8
1.0
1.9
3.5
5.6
RSP
84495LN
84395LN
84442LN
84367LN
84368LN
84369LN
e.g. FDC25E1500
Type
Length in mm**
Single rail
Size
89
Franke Dynamic
Type FDH
Franke Dynamic
Dimensions
Size
25
35
45
B1
B2
D1
D2
70
100
120
98
135
165
36
48
60
23.0
32.0
45.0
23.50
34.00
37.50
6.6
9.0
11.0
11
15
18
M 8
M 10
M 12
Dimensions
mm
E1
E2
45
62
80
57
82
100
H1
H2
H3
H4
L2
L3
T1
27.0
37.0
46.0
8.5
10.5
13.5
2.5
3.5
4.0
13.0
20.0
22.0
10
12
16
60
80
105
10.0
11.5
14.5
16
20
24
Load ratings
N
C
Co
7500
13400
24300
3700
8100
14400
Order numbers
118
315
777
81
250
548
165
416
924
Weight
kg
Cassette
rail/m
0.5
1.4
2.5
1.8
3.2
5.5
Cassette
Double rail
84363S
84364S
84365S
e.g. FDA25D1500
Type
Length in mm**
Double rail
Size
*There is more information on moment load ratings on page 106/107.
90
Materials
Body material
Standard
High-strength,
Antifriction
anodized
bearing steel
aluminium
Rollers
Wipers
Plastic plate
with felt wiper
Franke Dynamic
Dimensions
Size
B5
25
48.4
35
68.9
45
82.4
H5
B3
B4
D3
D4 D5
E3
27.5
37.5
46.5
25.00
35.00
45.00
22.9
32.9
36.4
M5
M6
M8
14
14
14
6.4
8.9
9.9
6
6
6
Dimensions
mm
E4
E5
48
67
83
84
117
146
E6
E7
E8
E9
H6
T3
19.4
28.4
30.9
7.4
8.9
9.9
12.0
17.0
22.0
8.9
8.9
8.9
7
7
7
5.0
7.5
9.5
10.5
12.5
15.5
17.5
26.0
31.0
Order numbers
Weight
kg
RSP
rail/m
0.34
0.99
1.79
1.9
3.5
5.6
RSP
84367S
84368S
84369S
e.g. FDA25E1500
Type
Length in mm**
Single rail
Size
*There is more information on moment load ratings on page 106/107.
91
Franke Power
Type FPA
Aluminium Recirculating Roller Guide
Standard
Franke Power
92
Materials
Body material
Standard
High-strength,
Antifriction
anodized
bearing steel
aluminium
Rollers
Wipers
Plastic plate
with TEEE
wipers
Dimensions
B1
B2
70
70
36
23
23.5
6.6
D1
D2
D3
11 M8 M6
Dimensions
mm
E1 E2 E3 H1
H3 H4
L2
L3
45
2.5
10
60 102 10 16
57
40
27
10
Load ratings
N
C
Co
23400 25000
T T1 T2 T3 S1 S2
8
Order numbers
L4
368
245
230
Weight
kg
Cassette
rail/m
0.39
1.8
Franke Power
Size
25
Double rail
e.g. FDA25D1500
Type
Length in mm**
Double rail
Size
*There is more information on moment load ratings on page 106/107.
93
Franke Robust
Type FRA
Aluminium Recirculating Ball Guide
Standard
Franke Robust
Lubrication borings
94
FRA06U / FRA08U
FRA10U / FRA13U
FRA06U / FRA13U
Materials
Body material
Balls
Wipers
Standard
High-strength,
anodized
aluminium
Steel
Zinc diecasting
Antifriction
bearing steel
Integrated
felt wiper
B1
B3
B4
B6
16.0
21.0
23.8
31.2
20.0
26.3
24.4
31.6
36.5
47.3
51.4
65.1
44.5
57.3
63.0
89.5
38.0
48.8
51.4
65.1
B7
D1
44.5
5.5
57.3
6.6
62.9
9.0
80.1 12.0
10
11
Dimensions
mm
E4
E5
E7
24.5
31.8
31.4
41.1
7.0
8.5
10.0
12.0
20.7
26.0
29.4
37.2
H1
H3
H6
L1 max.
L2
L3
16.7
22.2
25.0
33.0
1.0
1.0
1.0
1.2
27.7
32.5
39.4
48.7
4000
4000
4000
4000
25
50
50
50
50
100
100
100
7.0
8.5
B2
B5
B8
D2
15.0
15.0
19.5
19.5
24.4
24.4
31.6
31.6
23.1
23.1
29.5
29.5
36.0
36.0
56.0
56.0
8.0
8.0
10.0
10.0
11.5
11.5
15.0
15.0
6.0
M06
6.6
M08
9.0
M10
11.0
M12
D3
D4
D5
E1
E2
M05
M05
M06
M06
M06 M06 M06
M06
M08 M05 G1/8
M08
25
25
32
32
50
50
60
60
70
70
84
84
110
110
140
140
Dimensions
mm
E6
H2 H4
5
5
7
7
10
10
12
12
15.0
15.0
20.0
20.0
22.8
22.8
30.0
30.0
3.0
3.0
5.0
5.0
5.4
5.4
7.6
7.6
H5
L4
14.0
14.0
15.5
15.5
20.0
20.0
23.0
23.0
82.0
82.0
100.0
100.0
134.2
134.2
169.0
169.0
82
82
104
104
155
155
178
178
Load ratings
N
C
Co
24200
24200
38200
38200
62000
62000
103100
103100
37300
37300
58300
58300
85400
85400
137700
137700
L5
S1
S2
124
124 50
153
153 58
194
194 80
242
242 100
5.0
7.0
7.0
9.5
10.0
11.0
12.0
15.0
T1
T2
T3
4.0
4.0
4.8
4.8
Order numbers
Weight
kg
Recirculating element/unit
rail/m
0.2
0.2
0.4
0.4
0.8
0.8
1.7
1.7
0.7
0.7
1.2
1.2
1.9
1.9
2.9
2.9
Recircl.
element
80587A
80545A
80588A
80546A
80589A
80547A
80590A
80548A
Single rail
e.g. FRA06E1500
Type
Length in mm**
Single rail
Size
95
Franke Robust
Size
FRA06UD
FRA06UM
FRA08UD
FRA08UM
FRA10UD
FRA10UM
FRA13UD
FRA13UM
Linear Tables
Type FTB
Linear Tables/Modules
FTB06A / FTB06B
96
Materials
Body material
Balls
Wipers
Standard
High-strength,
anodized
aluminium
Antifriction
bearing steel
100Cr6
Plastic plate
with felt wiper
Special
Non-corrosive
steel
X12CrNi177
Dimensions
FTB06A
100 15000
200 15000
300 15000
400 15000
500 15000
700 15000
1000 15000
1200 15000
1500 15000
670
670
670
670
670
670
670
670
670
FTB06B
100 30000
200 30000
300 30000
400 30000
500 30000
700 30000
1000 30000
1200 30000
1500 30000
1380
1380
1380
1380
1380
1380
1380
1380
1380
220
220
220
220
220
220
220
220
220
30.0 72.5
42.5
92.5
32.5
82.5
72.5
30.0 82.5
30.0 72.5
32.5
1930 50
1930 100
1930 40
1930 90
1930 30
1930 20
1930 60
1930 50
1930 30
165
165
165
165
165
165
165
165
165
315
415
515
615
715
915
1215
1415
1715
365
465
565
665
765
965
1265
1465
1765
1 x 110
3 x 110
3 x 110
5 x 110
5 x 110
7 x 110
9 x 110
11 x 110
15 x 110
16
16
16
16
16
16
16
16
16
5
5
5
5
5
5
10
10
10
8
8
8
8
8
6
12
8
6
15
15
15
15
15
14
25
12
8
1600
1600
1600
1600
1600
1200
1200
800
600
3000
3000
3000
3000
3000
2800
2500
1200
800
8xM6
8xM6
8xM6
12xM6
12xM6
16xM6
24xM6
28xM6
32xM6
6.4
7.5
8.6
9.7
10.8
13.0
16.3
18.5
21.8
92621A
92622A
92623A
92624A
92625A
92626A
92627A
92628A
92629A
280
280
280
280
280
280
280
280
280
430
530
630
730
830
1030
1330
1530
1830
480
580
680
780
880
1080
1380
1580
1880
3 x 110
3 x 110
5 x 110
5 x 110
7 x 110
9 x 110
11 x 110
13 x 110
15 x 110
16
16
16
16
16
16
16
16
16
5
5
5
5
5
5
10
10
10
8
8
8
8
8
6
12
8
6
15
15
15
15
15
14
25
12
8
1600
1600
1600
1600
1600
1200
1200
800
600
3000
3000
3000
3000
3000
2800
2500
1200
800
8xM6
8xM6
12xM6
12xM6
16xM6
20xM6
24xM6
28xM6
32xM6
7.5
8.6
9.7
10.8
11.9
14.1
17.4
19.6
22.9
92630A
92631A
92632A
92633A
92634A
92635A
92636A
92637A
92638A
97
Linear Tables/Modules
Stroke Load
Torque
Dimensions
Spindle Traverse
Spindle
Fixing
Weight Order no.
rating
speed rotary speed screws
kg
N
Nm
mm
m/min-1
C Mcx Mcy, Mcz
A B LS LF
L1 X x 110 pitch Stand. Max. Stand. Max. Numberxsize
Linear Modules
Type FTC
Linear Tables/Modules
FTC 15-25
Dimensions
Size
15
20
25
A1
B1
125
150
200
100
125
175
22
25
25
22.0
25.5
33.0
41
52
87
Size
AA AZ BB
15
154 10 144
20
197 11 187
25
276 24 266
98
DD
CF
EC EE EG FB
FF
FH
Dimensions
mm
E
27
36
70
M5
M6
M6
10
12
12
117
152
200
21.5
28.5
43.0
40.5
49.0
62.0
M6
M6
M6
Dimensions
mm
FT GG JJ KB KB1 KC
KE
KF KG KH KL KL1 KM KN KP ZZ
6 15 22.0 37.0 57 30 24 17
10 18 17.5 36.5 61 38 26 31
15 32 23.5 48.5 85 50 34 43
2 13 M5 12
2 20 M6 12
3 28 M8 16
Materials
Body material
Balls
Wipers
Standard
High-strength,
anodized
aluminium
Antifriction
bearing steel
100Cr6
Plastic plate
with felt wiper
Non-corrosive
steel
X12CrNi177
Stroke
Order no.
mm
FTC 15
FTC 20
FTC 25
with: Toothed belt
Spindle Toothed belt
Spindle Toothed belt
100
92700A
92700S
92734A
92734S
92768A
200
92701A
92701S
92735A
92735S
92769A
300
92702A
92702S
92736A
92736S
92770A
400
92703A
92703S
92737A
92737S
92771A
500
92704A
92704S
92738A
92738S
92772A
600
92705A
92705S
92739A
92739S
92773A
700
92706A
92706S
92740A
92740S
92774A
800
92707A
92707S
92741A
92741S
92775A
900
92708A
92708S
92742A
92742S
92776A
1000
92709A
92709S
92743A
92743S
92777A
1100
92710A
92710S
92744A
92744S
92778A
1200
92711A
92745A
92745S
92779A
1300
92712A
92746A
92746S
92780A
1400
92713A
92747A
92747S
92781A
1500
92714A
92748A
92748S
92782A
1600
92715A
92749A
92749S
92783A
1700
92716A
92750A
92750S
92784A
1800
92717A
92751A
92751S
92785A
1900
92718A
92752A
92752S
92786A
2000
92719A
92753A
92753S
92787A
2200
92721A
92755A
92789A
2400
92723A
92757A
92791A
2600
92725A
92759A
92793A
2800
92727A
92761A
92795A
3000
92729A
92763A
92797A
3200
92731A
92765A
92799A
3400
92733A
92767A
Spindle
92768S
92769S
92770S
92771S
92772S
92773S
92774S
92775S
92776S
92777S
92778S
92779S
92780S
92781S
92782S
92783S
92784S
92785S
92786S
92787S
92789S
92791S
92793S
92795S
92797S
92799S
Performance overview
Load rating: stat. / dyn. Co / C
Max. torque (MCX / MCY, MCZ)
Max. speed
Linear route per motor revolution
Mass: basic weight/per m stroke/moved
Max. rotary speed of the drive axle
Max. effective power FX < 1 m/s
at speed 1-2 m/s
at speed > 2 m/s
Basic torque (without load)
Max. permissible drive torque < 1 m/s
at speed 1-2 m/s
at speed > 2 m/s
Max. acceleration/deceleration
Repeat accuracy
Positioning accuracy*
Run accuracy
N
3400/4200
Nm
81/190
m/s
2
0.25
mm
60
5
kg
1.8/0.43/0.75 1.9/0.36/0.75
2000
min 1
N
55
250
N
50
250
N
Nm
0.4
0.2
Nm
0.9
Nm
0.9
0.6
Nm
m/s
10
10
mm/m
0.05
mm/m
0.15
mm
0.03/300
5400/5400
133/338
3
0.25/0.5
60
5/10
3.7/0.7/1.18 3.6/0.59/1.18
3000
150
600
120
600
100
0.2
0.2/0.3
2.3
1.5/2.8
2
1.8
10
10
0.05
0.15
0.03/300
15100/13500
483/922
5 0.25/0.5/1.25/2.5
100
5/10/25
8.2/1.32/2.5
8.8/1.01/2.5
3000
425
1500
375
1500
300
0.6
0.3/0.4/0.5
10
4.2/7.5/20
9.5
7.5
10
10
0.05
0.15
0.03/300
99
Linear Tables/Modules
Special
Linear Modules
Type FTD
Linear Tables/Modules
FTD 15-35
Dimensions
Size
15
20
35
Size
15
20
35
100
218
262
347
88
112
147
93
116
175
25
28
18
M5
M6
M6
Dimensions
mm
H
J
10
12
12
CE
CF
EC
EF
FB
FH
KF
KB*
42
56
87
52.5
66.5
92.5
79
100
158
27
36
70
92
116
164
39.5
51.7
77.0
49.0
62.0
79.5
16H7
22H7
32H7
178
218
263
Dimensions
mm
KC KL KJ
18.3
24.8
35.3
5
6
10
8
12
19
21.5
28.5
43.0
31
38
49
85
100
124
64
64
90
40
40
60
M6
M6
M6
KN
KO
KP
KR
KS*
KT
34
53
75
21.7
30.0
41.0
30
30
35
16h7
22h7
32h7
16H7
22H7
32H7
82
106
144
KU ZZ
M 8
M 10
M 12
8
10
10
Materials
Body material
Balls
Wipers
Standard
High-strength,
anodized
aluminium
Antifriction
bearing steel
100Cr6
Plastic plate
with felt wiper
Non-corrosive
steel
X12CrNi177
Stroke
mm
FTD 15
without motorisation
100
92900A
200
92901A
300
92902A
400
92903A
500
92904A
600
92905A
700
92906A
800
92907A
900
92908A
1000
92909A
1200
92910A
1400
92911A
1600
92912A
1800
92913A
2000
92914A
2500
92915A
3000
92916A
3500
92917A
4000
92918A
4500
92919A
5000
92920A
5500
92921A
6000
92922A
6500
92923A
7000
92924A
Order no.
FTD 20
without motorisation
FTD 35
without motorisation
92925A
92926A
92927A
92928A
92929A
92930A
92931A
92932A
92933A
92934A
92935A
92936A
92937A
92938A
92939A
92940A
92941A
92942A
92943A
92944A
92945A
92946A
92947A
92948A
92949A
92950A
92951A
92952A
92953A
92954A
92955A
92956A
92957A
92958A
92959A
92960A
92961A
92962A
92963A
92964A
92965A
92966A
92967A
92968A
92969A
92970A
92971A
92972A
92973A
92974A
5400/5400
76/460
10
40
1870
1560
1030
2.2
7.7/6.7/1.9
71
60
39
240
2500
+/0.05
+/0.15
+/0.03/300
18000/12500
294/1233
10
40
3120
2660
1940
3.2
22.6/15.2/4.7
174
148
108
350
1700
+/0.05
+/0.15
+/0.03/300
Performance overview
Load rating: stat. / dyn. Co / C
Max. torque (MCX / MCY, MCZ)
Max. speed
Max. acceleration/deceleration
Max. effective power FX < 1 m/s
at speed 1-3 m/s
at speed > 3 m/s
Basic torque (without load)
Mass: basic weight/per m stroke/moved
Max. permissible drive torque < 1 m/s
at speed 1-3 m/s
at speed > 3 m/s
Linear route per motor revolution
Max. rotary speed of the drive axle
Repeat accuracy
Positioning accuracy*
Run accuracy
N
Nm
m/s
m/s
N
N
N
Nm
kg
Nm
Nm
Nm
mm
min 1
mm/m
mm/m
mm
3400/4200
45/274
10
40
1070
890
550
1.2
3.8/4.3/1.0
31
25
16
180
3000
+/0.05
+/0.15
+/0.03/300
101
Linear Tables/Modules
Special
Accessories
Clamping
Cassette with star grip or clamping lever for fixing to any position
on the guide section. The clamping does not apply any force to the
15
20
25
35
45
Dimensions
mm
b
h Holding force
a
25
25
32
50
63
41
49
56
83
101
19.0
23.0
28.0
38.5
48.0
200
250
250
350
750
Order no.
NonStandard corrosive
84396AK
84441AK
84363AK
84364AK
84365AK
84396NK
84441NK
84363NK
84364NK
84365NK
15
20
25
35
45
l
45
45
45
63
78
Dimensions
Order no.
mm
NonWt.
b
h Holding force Standard corrosive
M 5
M 5
M 6
M 8
M 10
59.5 64.0
67.5 68.0
71.0 73.0
96.0 101.5
116.0 126.0
Accessories
Metal Wipers
The metal wipers are inserted in the wiper plate in addition to the
felt wipers and clipped. They assist removal of coarse dirt, such as
metal chips, welding chips or sawdust.
Size
102
12
15
20
25
35
45
Order no.
69126A
69127A
69128A
69129A
69130A
69131A
200
250
250
350
750
84396AH
84441AH
84363AH
84364AH
84365AH
84396NH
84441NH
84363NH
84364NH
84365NH
Bellows
The bellows for Aluminium Roller Guides protect the guide system
from coarse dirt. They are available in any length. Fixing to the
cassette and end plate is effected using glued Velcro . The
Size
Dimensions
mm
h
h1
15
20
25
35
45
42
47
55
68
87
31.0
35.0
42.5
55.0
67.0
7.0
5.0
6.5
7.0
7.0
Order no.
k
on request
2.8
2.8
2.8
3.5
3.5
Stop Screws
The stop screws are screwed to the guide rails in thread (option).
A fitted rubber cap cushions impact. The bore shape is delivered
offset by a half bore jump for rail lengths with initial bore dimensions
less than L11 min. Material: Chloroprene rubber (Cr), colour black.
Size
M 5
M 5
M 5
M 6
M 8
M 10
12
15
20
25
35
45
Dimensions
mm
D
K L11 min.
12
12
12
15
19
24
8
8
8
10
13
16
15.0
16.0
17.0
20.5
26.5
33.0
Order no.
P
6.0
6.0
6.0
7.5
9.5
12.0
63504A
63504A
63504A
63505A
63506A
63507A
Caps
delivery. They can also be ordered separately as replacements.
Material: POM wear-resistant plastic, oil and ageing-resistant.
Size
12
15
20
25
35
45
Dimensions
mm
Cylinder screw DIN912
M 3
M 4
M 5
M 6
M 8
M 10
Order no.
D
6
8
10
11
15
18
87752A
87753A
87754A
87755A
87756A
87757A
103
Accessories
The borings of the guide rails should be closed with plastic caps
for best function of the wipers. These caps are included in every
Accessories
Linear Modules Type FTC/FTD
Profile Fixings
Size
MAE
AF
DF
DH
DK
DM
15
20
25/35
M5
M5
M6
5.5
5.5
7.0
22
30
48
27
33
40
38
46
71
26
27
34
40
46
59
Dimensions
mm
DN DO
DP
47.5
54.5
67.0
40
40
45
92
92
112
Order no.
DQ
DR
DT
EF
EM
EN
EQ
RE
34.5
40.5
52.0
8
10
10
10
10
11
41.5
48.5
64.0
28.5
35.5
45.0
49
57
72
36
43
57
26
32
44
92981A
92982A
92983A
Centre Supports
E1
Accessories
Size
D1
U UU
AF
DF
DH
DK DM
Dimensions
mm
DN DO DP
DQ DR
Order no.
DS
DT
EF
EM
EN EQ
RE
E1
15
M5 5.5 10
22
27 38 26 40 47.5 36 50 34.5
8 5.7 10 41.5 28.5 49 36 26
20
M5 5.5 10
30
33 46 27 46 54.5 36 50 40.5 10 5.7 10 48.5 35.5 57 43 32
25/35
M6 7.0
48
40 71 34 59 67.0 45 60 52.0 10
11 64.0 45.0 72 57 44
92821A
92826A
92831A
D1
15
M5 5.5 10
22
27 38 26 40 47.5 36 50 34.5
8 5.7 10 41.5 28.5 49 36 26
20
M5 5.5 10
30
33 46 27 46 54.5 36 50 40.5 10 5.7 10 48.5 35.5 57 43 32
25/35
M6 7.0
48
40 71 34 59 67.0 45 60 52.0 10
11 64.0 45.0 72 57 44
92820A
92825A
92830A
104
Cover Fixings
Size
A1 E U
Dimensions
mm
AB AC AD AE
AF DG
27
36
22
30
15
20
Size
C1
15
20
25/35
27
36
5.8
6.6
E U AB
27 6.6
36 9.0
70 9.0
16
18
22
26
18
20
Dimensions
mm
AC AD AE AF
52 16.0
64 18.0
48 12.5
25
25
30
25
25
30
Order no.
39
50
92810A
92813A
Order no.
AG
DG
22
91
30
114
48 128 174
92978A
92979A
92980A
15
20
35
Max.
torque
Nm
60
60
160
Dimensions
DH Kbmax. LD
55
55
65
16h7
22h7
32h7
mm
LR1
Order no.
LZR
dR
92997A
92998A
92999A
RS
Reed closer
RS
Order no.
Reed opener
ES
ES
PNP closer
NPN closer
Type:
Type:
Type:
RS-K
RS-K
ES-S
92841A
92842A
92844A
RS-S
RS-S
92847A
92843A
Connection cable 5 m with coupling and open end
Signal transmitter type ES-S/RS-S
Type:
ES-S
92845A
92846A
105
Accessories
End Switch
Technical Information
Type FD Franke Dynamic
1 Designs and System Description
Aluminium Roller Guides from Franke are available as double
rails with cassette or as a pair of single rails with a pair of roller
shoes:
Technical Information
106
and accuracies for the guides are given on the relevant pages
of the catalogue.
a
mm
b
mm
4.5
5.0
7.5
10.5
12.5
15.5
9.6
12.6
16.1
17.6
26.1
31.1
12
15
20
25
35
45
1220
mm
2545
mm
0.03
0.10
0.05
0.20
Technical Information
107
Technical Information
The rails are also marked with a groove on the rail underside,
which must always be on the same side. The rails must be
arranged free of play. The corresponding auxiliary cylinders
(illustration 7) are used for this. The dimensions for the design
of the auxiliary cylinders are in table 3. The cylinders are
inserted at the joints of the rails in the raceway and preloaded
using a device.
Size
Auxiliary Cylinder
mm
12
15
20
25
35
45
11
11
14
16
27
35
Screws
Tightening Torque
M 3
M 4
M 5
M 6
M 8
M 10
M 12
1.1
2.5
5.0
8.5
21.0
41.0
71.0
Technical Information
108
Size
12
15
20
25
35
45
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
FDA
0.2
0.4
0.5
2.0
1.0
2.5
1.5
3.0
2.0
4.0
2.5
5.0
Slide Resistance
N
FDB FDC FDD
FDE
0.2
0.4
0.5
1.0
0.5
1.5
0.5
2.0
1.0
2.5
2.0
4.0
0.5
1.0
0.5
2.0
1.0
2.5
1.5
3.0
2.0
4.0
3.5
10.5
1.5
3.0
0.5
3.0
1.0
3.0
1.0
3.0
1.5
3.0
2.0
4.0
2.5
5.0
FDG
FDH
0.6
0.9
0.5
1.5
1.0
3.0
0.5
2.0
1.0
2.5
2.0
4.0
2.5
5.0
4.0
7.0
5.0
8.0
m
100
90
80
FDB, FDG
FDA, FDC,
FDD, FDE
70
60
50
40
FDH
30
20
10
0
12
15
20
25
35
45
Size
Degree
1.0
0.9
12
0.8
0.7
20
0.6
0.5
35
25
15
0.4
0.3
0.2
0.1
0
100
200
300
400
500
600
700
800
Nm
Degree
0.150
0.135
35
0.120
25
0.105
0.090 1520
0.075
12
0.060
45
0.045
0.030
0.015
10
20
30
40
50
60
70
80
Nm
Technical Information
109
Technical Information
Size
25
mm
0.05
0.20
Technical Information
110
m
50
45
40
35
30
25
FP
20
15
10
5
Auxiliary Cylinder
mm
25
12
15
20
25
35
45
Size
Degree
1.0
16
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
Screws
Tightening Torque
M6
M8
8.5
21.0
0.1
0
40
80
120
160
200
240
280
Nm
4 Lubrication
The Recirculating Roller Guides are initially lubricated ex works.
After approx. 2000 km of running performance, the guides must
be relubricated with 1 to 2 grams of lubricant.
5 Slide Resistances
Slide resistance
N
Min.
Max.
FP
17.5
30.0
Technical Information
Size
25
111
Technical Information
Type FR Franke Robust
1 Designs and System Description
Aluminium Recirculating Ball Guides of type FRA comprise two
individual rails and recirculating elements (see illustration 1).
The recirculating elements are mounted on the mating plate and
together form the carriage. The construction of the mating plate
is specified by the customer.
Technical Information
112
5 Slide Resistances
Size
6
8
10
13
6 Running Accuracy
Franke Robust running accuracy over 1 m
m
100
90
Screw
M 5
M 6
M 8
M 10
80
70
60
50
FR
40
30
20
10
0
10
13
Size
Tightening Torque
6.0
10.0
25.0
49.0
4 Lubrication
Technical Information
113
Technical Information
Linear Tables/Modules
1 Design
Franke Linear Systems are suitable for example for automation
tasks in measuring and testing processes or for rationalisation
in the handling and fitting sector. The selection ranges from
strokes from 100 mm to 7000 mm, drive is effected via a spindle
or belt drive. The light aluminium construction combined with
the integrated Franke guide system allows high load ratings and
torque loads. Precise technical details are on the relevant pages
in the catalogue.
2 Area of Use
Technical Information
5 Definitions
114
Technical Information
Notes
115
Your Partners.
Presenting the Franke Team.
Taking care of customers from A to Z competently and reliably that is the declared Franke
target. Whether further information on the products, specific offers, technical sales on
site, training or support on maintenance our staff are gladly there for you for all queries
concerning Antifriction Bearings and Linear Systems.
Management
(from the left)
Daniel Groz
Sascha Eberhard
Jrg Egelhaaf
Harald Mller
Gnter Fischer
Oliver Schrder
116
Managing Director
Managing Director
Technical Manager
Production Manager
Sales Manager
Purchasing Manager
Reception
(from the left)
Alexandra Stoll
Petra Abele
Heike Faustmann
Michael Momesso
Christiane Schiele
Marlen Maier
a.stoll@franke-gmbh.de
p.abele@franke-gmbh.de
h.faustmann@franke-gmbh.de
m.momesso@franke-gmbh.de
c.schiele@franke-gmbh.de
m.maier@franke-gmbh.de
117
Technical Sales
(from the left)
Thilo Deutsch
Markus Wagner
Stephan Kuhn
Maintenance
Our experts perform the maintenance and adjustment
of Antifriction Bearings and Linear Systems onsite.
There are also Maintenance aids and instruction
manuals to assist you.
Training
We offer maintenance training for Antifriction Bearings and
Linear Systems free of charge. Dates can be agreed individually.
Training takes place either at out facilities in Aalen or directly
at your site.
Internet
CAD data for download, practical examples, news on our company,
industry brochures and and and a look at www.franke-gmbh.com
is worthwhile.
118
Franke Worldwide
Germany
Technisches Bro Tober
Langenberger Strae 21 H
09337 Callenberg
Tel.
+49 3723 6686-87
Fax
+49 3723 6686-89
Mobile +49 172 7326532
franke@tober-gmbh.de
Janotec Handelsvertretung
Joachim Janot
Gutenbergstrae 13
73430 Aalen
Tel.
+49 7361 680660
Fax
+49 7361 680662
Mobile +49 172 7396071
janot@janotec.de
Czech Republic
Betz S.R.O.
Zeyerova 6/234
35301 Marinsk Lzn
Tel.
+420 354 620095
Fax
+420 354 627307
miloslav.strnad@betz.cz
France
Agora Technique
8 Bis Rue Volta, Parc Volta
94140 Alfortville
Tel.
+33 1 45184370
Fax +33 1 45184371
benitah.agora@wanadoo.fr
an-tec
Mechanische Antriebstechnik
Kristian Plk
Leonard-Nelson-Strae 32
37073 Gttingen
Tel.
+49 551 48967-35
Fax
+49 551 48967-34
k.poelk@an-tec.de
Gnter Horl GmbH
Zwingenbergstrae 287
47800 Krefeld
Tel.
+49 2151 598550
Fax
+49 2151 502963
Mobile +49 172 2779089
info@horl-gmbh.de
Christian Burghard
Obere Bahnstrae 64
73431 Aalen
Tel.
+49 7361 920-124
Fax
+49 7361 920-120
Mobile +49 173 3234833
c.burghard@franke-gmbh.de
Volker Schmerreim GmbH
Dorfweg 12 Hemhof
83093 Bad Endorf
Tel.
+49 8053 9058
Fax
+49 8053 3593
Mobile +49 170 5227791
info@schmerreim.de
Europe
Austria
Ren Schuber (ZIP 1, 2, 6, 7, 8, 9)
Hardeggasse 67/29/3
1220 Wien
Tel.
+43 1 2838742
Fax +43 1 2838742
Mobile +43 676 7079221
office@hv-schuber.at
Great Britain
Antifriction Bearings
Franke Bearings Ltd.
Unit 5/90, Berry Lane
Longridge, PR3 3WH
Tel.
+44 1772 723777
Fax +44 1772 733777
sales@linearmotionsystems.co.uk
Linear Systems
LMS Linear Motion Systems Ltd.
Unit 5/90, Berry Lane
Longridge, PR3 3WH
Tel.
+44 1772 723777
Fax +44 1772 733777
sales@linearmotionsystems.co.uk
Hungary
Somogyi Kft.
Temeti zletsor
2510 Dorog
Tel.
+36 33 522-222
Fax
+36 33 522-220
Mobile +36 30 6309456
poloskei@skft.hu
Italy
HTC Srl
Via XXIV Maggio 40
10082 Cuorgn TO
Tel.
+39 0124 651916
Fax +39 0124 690205
info@htcfranke.it
Middle East
Netherlands/Belgium
Gileon Technical Components
Eindsestraat 129A
5105 NA Dongen (Netherlands)
Tel.
+31 85 2017 814
Fax +31 84 8399 240
Mobile +31 627 046413
info@gileon.nl
Turkey
HPA Teknoloji Gelistirme Ltd. Sti.
1201/1 Sok. No: 4/A P-21
Temsil Plaza
Yenisehir/Izmir
Tel.
+90 232 469 7961
Fax
+90 232 433 9625
info@hpa.com.tr
Poland
JORDAN matcon Sp. z o.o.
Kijewo 50
63-000 Sroda Wlkp.
Tel.
+48 61 286 07 01
Fax
+48 61 286 07 05
info@jordan-matcon.pl
Asia
China
Sinotech Asia Ltd.
Unit 1501-02A, Tower 5,
China Hong Kong City,
33 Canton Road, Kowloon
Hong Kong
Tel.
+852 2199 4600
Fax
+852 2369 0796
manfred.baeuerle@
groz-beckert.com
Portugal
Iberacero S.L.
Zona Industrial Maia I, Sector I, Lote 45
4475-132 Gemunde
Tel.
+351 22 947 9020
Fax
+351 22 947 9029
geral@iberacero.com
Spain
Vorkauf Sociedad Anonima
Avda. Comandante Franco, 3
28016 Madrid
Tel.
+34 91 3591712
Fax
+34 91 3500431
vorkauf@vorkauf.es
ASP Automatic System Partners
Pol. Ind. El Nogal
C/ El Nogal 8
28110 Algete, Madrid
Tel.
+34 916 20 900
Fax
+34 916 282 554
info@asp-es.com
Sweden/Denmark
Bengtssons Maskin AB
Fretagsvgen 14
Box 501
23224 Arlv (Sweden)
Tel.
+46 40 6807309
Fax
+46 40 430271
peter.knutsson@
bengtssons-maskin.se
Switzerland
Emil Vgelin AG
Rinaustrasse 476
4303 Kaiseraugst
Tel.
+41 61 8169016
Fax
+41 61 8169000
cgs@voegelinag.ch
Israel
American Aviation Ltd.
Keidar Center, 19 HaHaroshet Street
Industrial Zone
Raanana 43101
Tel.
+972 9 7487826
Fax +972 9 7487830
yoav@amav.co.il
America
Canada
Franke Canada
61 Chateau Crescent
N3H5S2 Cambridge,
Ontario
Tel.
+1 519 591 3257
Fax
+1 519 650 8123
info@franke-ca.com
USA
Antifriction Bearings
Rotek Incorporated
1400 South Chillicothe Rd.
P.O. Box 312
Aurora, Ohio 44202
Tel.
+1 330 5624000
Fax
+1 330 5629351
sales@rotek-inc.com
Linear Systems
Parker Origa Corporated
100 West Lake Drive
Glendale Heights, IL 60139
Aurora, Ohio 44202
Tel.
+1 630 871-8300
Fax
+1 630 871-1515
cathy.lascero@parker.com
India
Neel Kamal
55, 1st Floor S.V. Complex,
K.R. Road, Basavanagudi
560 004 Bangalore
Tel.
+91 802 662 0402
Fax
+91 802 662 0400
megamaintenance@vsnl.com
Korea
Numacs Co. Ltd.
202-602 Bucheon
Techno Park 2-danji
Yakdae-dong Wonmi-gu,
Bucheon-si Gyeonggi-do
420-733, South Korea
Tel.
+82 324618110
Fax +82 324618112
info@numacs.co.kr
Taiwan
Groz-Beckert (Taiwan) Ltd.
5F No. 202, Sec.2 Yanping N.Rd.
Datong District, Taipei City 103
Tel.
+886 2 25531608
Fax
+886 2 25531627
gary.shih@groz-beckert.com
Franke GmbH
Obere Bahnstrae 64
73431 Aalen, Germany
Tel. +49 7361 920-0
Fax +49 7361 920-120
info@franke-gmbh.de
www.franke-gmbh.com