Professional Documents
Culture Documents
Filter Kit Setup and Operating Instructions
Filter Kit Setup and Operating Instructions
DESCRIPTION
COMPONENTS
The in-line filter kit consists of the following items:
DESCRIPTION
QTY
Filters
10
10'
CD w/ Manuals
SETUP
QTY
Filters
10
5'
CD w/ Manuals
Figure 1 provides a diagram showing the setup of just the inline filter holder with an active cell.
Figure 2 provides a diagram showing a setup of all components that could be used in a measurement system with an
active cell.
Cut tubing to the desired lengths and install the cell mating
connectors as required.
OPERATION
MAINTENANCE
T: 613.226.7920
F: 613.226.8195
E: instrument@pylonelectronics.com
www.pylonelectronics.com
FILTER KIT
Setup and Operating Instructions
OPERATION - PARTICULATE GATHERING
Start the pump & then stop the pump at the desired time.
Remove the filter and place in the filter detector for measurement.
MAINTENANCE - PARTICULATE GATHERING
The filter should be replaced prior to every measurement.
Filters may be reused if they are allowed to sit for a minimum
of 24 hours to allow the radon daughters to decay.
CAUTION
Always handle filters with tweezers to prevent skin from coming in contact with potentially radioactive particulates.
Figure 3
Figure 1
Figure 4
Figure 2
Figure 5
T: 613.226.7920
F: 613.226.8195
E: instrument@pylonelectronics.com
www.pylonelectronics.com