Professional Documents
Culture Documents
JNTU B Tech 1st Year Engineering Workshop Lab Manual PDF
JNTU B Tech 1st Year Engineering Workshop Lab Manual PDF
per is firmly clamped in the carpenters vice and any two adjacent faces are planed by
2. The reaper is firmly clamped in the carpenters vice and any two adjacent faces are planed by
4. Round blocks (3Nos) are screwed onto the board, as per the diagram.
Smiths fo
1. One end of the bar is heated to red hot condition in the smiths forge for the required length.
1. One half of the rod is heated to red hot condition in the smiths forge.