Professional Documents
Culture Documents
Technology and
Livelihood
Education
SMAW NCI – Module 1
Identify and Select Materials
and Tools
Republic Act 8293, Section 176 states that: No copyright shall subsist in any
work of the Government of the Philippines. However, prior approval of the government
agency or office wherein the work is created shall be necessary for exploitation of such
work for profit. Such agency or office may, among other things, impose as a condition
the payment of royalties.
Borrowed materials (i.e., songs, stories, poems, pictures, photos, brand
names, trademarks, etc.) included in this module are owned by their respective
copyright holders. Every effort has been exerted to locate and seek permission to use
these materials from their respective copyright owners. The publisher and authors do
not represent nor claim ownership over them.
This module was designed to provide you with fun and meaningful
opportunities for guided and independent learning at your own pace and time.
You will be enabled to process the contents of the learning resource while being
an active learner.
1. Use the module with care. Do not put unnecessary mark/s on any part
of the module. Use a separate sheet of paper in answering the exercises.
2. Don’t forget to answer What I Know before moving on to the other
activities included in the module.
3. Read the instruction carefully before doing each task.
4. Observe honesty and integrity in doing the tasks and checking your
answers.
5. Finish the task at hand before proceeding to the next.
6. Return this module to your teacher/facilitator once you are through with
it.
If you encounter any difficulty in answering the tasks in this module, do not
hesitate to consult your teacher or facilitator. Always bear in mind that you are
not alone.
We hope that through this material, you will experience meaningful learning and
gain deep understanding of the relevant competencies. You can do it!
Table of Contents
Content Page
Module 1 ------------------------------5
What’s in ------------------------------6
This is designed for you as grade 7 learners. It will identify your prior
knowledge, test your understanding and learn concepts and skills for you to be
able to do self-evaluation. As you go over the pages of this module, you will be
challenged to come out as a skillful person and competent in manipulating hand
tools.
The basic exploratory course and activities in this module can be of great
help in meeting the standard in the Exploratory Phase of Shielded Metal Arc
Welding.
1
What I know
Multiple Choice
Directions: Read each sentence carefully. Choose the letter of the correct
answer. Write the answer in your SMAW activity notebook.
1. Which type of wrench that is used for tightening hose and fitting connection
on oxy-acetylene unit?
a. Adjustable wrench c. Open-end wrench
b. Closed-end wrench d. Oxy acetylene wrench
2. What tool is used for loosening and tightening light and heavy nuts and
bolts?
a. Hacksaw c. Screw driver
b. Hammer d. Wrench
3. What type of measuring tool that is made of tampered steel about 1/8-inch-
thick and ¾ inch wide and 6to 12 inches long?
a. Pull-push rule c. Steel tape
b. Steel rule d. Try square
4. What tool that has a wedge-shaped and used to shear, cut, and chip
metal?
a. Cold chisel c. Punches
b. Hammer d. Scraper
5. Which of the following tools does not belong to measuring tools?
a. Clamps c. Micrometer caliper
b. Combination square d. Steel rule
6. What kind of hand tool that is designed to turn screws?
a. Center punch c. Screwdriver
b. Hammers d. Try square
7. What type of file that is used for enlarging holes?
a. Flat file c. Round file
b. Mill file d. Square file
2
8. What kind of cutting tool that has a solid and adjustable frame? It is used in
cutting metals but of minimal thickness, width, and length.
a. Combination square c. Micrometer caliper
b. Hacksaw d. Scraper
9. Which of the following tools does not belong to holding tools?
a. Clamps c. Tong
b. Pliers d. Try square
10. What kind of tool that is used for measuring or setting of distances, and to
lay out arcs and circles?
a. Dividers c. Helical- Ratchet
b. Files d. Philips
11. Which of the following tools does not belong to measuring tools?
a. Adjustable wrench c. Try Square
b. Pull-push rule d. Vernier caliper
12. It is used for straightening bending and deforming metals.
a. Ball-peen hammer c. Drill Vise
b. C-Clamp d. Scraper
13. A Driving tool used for removing slag on weld and with two faces, the
tapered from one side and round pointed on the other side.
a. Ball-peen hammer c. Chipping hammer
b. Flat file d. Tool maker clamp
14. The following are holding tools, except_______?
a. C- clamp c. Vise grip
b. Cold chisel d. Machinist vise
15. A tool used to grip the stock tight enough to hold the object.
a. Drill vise c. Tong
b. Plier d. Vise grip
3
Definition of Terms
4
Module
Identify and Select Materials and Tools
1
Introduction
If you are wondering what welding tools you need, this module is
designed for you to know the basic knowledge of tools and materials, its uses
and acquire the skills in manipulating them.
5
What’s in?
W_L_I_G T_ _L_
6
What’s new?
7
What is it?
To guide you in identifying common hand tools and their uses, pictures,
and illustration are provided for you
Pictures Uses
a. Pull-push rule
A pull push rule is a measuring
tape that coils into a compact
case. It is used for measuring
long, short, straight lengths .
www.google.com
b. Steel tape
Similar to a steel tape rule except
for its flexible number of feet that
are marked on the tape. The tape
is 3/8-inch-wide and available in
www.princessauto.com lengths from 25 to 100 feet
8
c. Steel rule This is the most common tool used
in tool room. It is made of tampered
steel about 1/8-inch-thick and ¾
inch wide and 6 to 12 inches long.
The same style maybe obtained in
www.123rf.com length from 1 to 48 inches.
d. Try square
www.google.com
e. Combination square
www.grainger.com
f. Micrometer caliper
www.technologystudent.com
9
h. Dividers
www.amazon.com
2. Cutting Tool is any tool that is used to remove some material from the work
piece by means of shear deformation.
Pictures Uses
a. Hacksaw It is a tooth cutting tool mainly
used in cutting metals like plates,
pipes, rods, bars, angular, etc.
but of minimal thickness, width
and length. Sometimes this tool is
used for cutting plastic pipes and
other materials that suit to its
www.stanleytools.com purpose.
b. Files are made of high-grade steel
which are hardened and
tempered. Each file has rows of
teeth that form, shape and finish
metal by removing small chips and
smoothing rough edges of the
metal surface. They differ in
length, shape, cut and
coarseness.
10
Kinds of files: a single-cut file used for filing and
finishing brass and bronze.
b.1. Mill file
www.depedbataan.com
11
c. Cold chisel A wedge-shaped tool used to
shear, cut, and chip metal.
www.depedbataan.com
d. Scraper is used in removing points, burrs,
and sharp edges from metal
surface and similar parts. This tool
is made of hardened steel of
various shapes that fit according to
each purpose.
12
Types of scrapers
https://en.wikipedia.org
e. Punch/punches a tool usually in the form of a
short rod of steel that is variously
shaped at one end for different
operations (such as forming,
perforating, embossing, or
Kinds of punches cutting)
www.depedbataan.com
13
3. DRIVING TOOL is a variety of steel tools used to install, repair and maintain a
variety of constructions.
Pictures Uses
a. Hammer
a.1. Ball-peen hammer is used for straightening bending
and deforming metals. It has two
faces. One is flat in striking cold
chisels and punches. The other
side the “peen” is rounded for
www.amazon.com bending and shaping metals. Ball
peen hammer generally has a
a.2. Chipping hammer wood or fiberglass handle
measuring 10-16 inches long.
Head weight ranges from 2-48 oz.
A 20oz hammer is good for general
purpose.
used for removing slag on weld
www.amazon.com
and with two faces, the tapered
from one side and round pointed
on the other side.
www.r-techwelding.co.uk
www.toolstation.com
14
A type of wrench used for
b.2. Oxy acetylene wrench
tightening hose
and fitting connection on oxy-
acetylene
unit.
www.amazon.in
Pictures Uses
a. Clamps These devices have been designed
to hold work securely which
performing skills through grinding,
bending, fitting, and cutting of
metals.
www.wonkeedonkeetools.co.uk
a. 2. C-Clamp
All-purpose clamp that is generally
used for all kinds of work.
www.amazon.com
a.3. Drill vise
A sturdy steel vise with movable jaw
that easily goes back or forth by
raising the handle.
www.amazon.com
15
a.4. Hand vise V block with clamp Used to hold metal stocks for small
machining operation.
www.calmeenyv.com
www.amazon.com
www.amazon.com
a.7.Tong
Used to hold the metal to be forged
and must be held securely while
working.
www.depedbataan.com
16
4. HOLDING TOOLS is a tool that firmly holds any material together.
b. Pliers
www.gigatools.ph
en.wikipedia.org
www.toolstation.com
b.4 Slip-joint
plier/Mechanical plier
www.grainger.com
17
What’s more?
Directions: Match Column A with Column B. Write the letter of your answer in
your SMAW activity notebook.
A B
1.VISE GRIP
a. f.
2. STEEL TAPE
3.BALLPEEN
HAMMER
b. g.
4. C-CLAMP
5. SQUARE FILE c. h.
6. HACK SAW
7. MACHINIST VISE d. i.
8.CHIPPING HAMMER
9. COMBINATION
e. j.
PLIER
10.COMBINATION
SQUARE
18
What I have learned
Directions: Fill in the blanks with the appropriate name of tools described in
each statement below. Choose your answers from the given pool
of words inside the box. Place your answer in your SMAW activity
notebook.
2. ___________ is a tool used for loosening or tightening light and heavy nuts
and bolts.
3. _____________ are made of different sizes and appearance that are fitted
to their purpose. These are designed to hold work pieces securely.
19
What I can do
20
TEST II.
Directions: Write the correct name beside the tool. Use your SMAW activity
notebook for your answer.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
21
Assessment
1. What instrument is used to measure the inside and outside diameter, as well
as the depth of hole and slot?
a. hacksaw c. screw driver
b. scraper d. Vernier caliper
2. Which type of file is used for enlarging holes?
a. flat file c. round file
b. mill file d. square file
3. Which type of tool is used for straightening, bending, and deforming metals?
a. ballpeen hammer c. Plier
b. Chipping Hammer d. Try square
4. What kind of tool is used to shear, cut, and chip metal?
a. Files c. Punches-tools
b. Maintenance d. Cold chisel
5. What tool is used in removing slag on weld?
a. Chipping hammer c. Hacksaw
b. Cold chisel d. Pliers
22
Test II. Identification
Directions: Identify the following tools according to classifications.
Write:
m – for Measuring tools c – for Cutting tools
d – for Driving tools h – for Holding tools
Write your answers in your SMAW activity notebook.
1. 2.
3. 4.
5.
23
6. 7.
8. 9.
10.
.
24
Additional Activities
Activity!
Directions: Identify the following tools and its uses. Write your answer in your
SMAW activity notebook.
25
26
to the next lesson. Good luck!
Rest and relax a while then move on
Congratulations! You did a great job!
What I Know What’s More What I can do Assessment
Pretest I Self-Check 1.1 Test I Test I
1. d 1. g 1. c 1. d
2. d 2. b 2. e 2. c
3. b 3. j 3. b 3. a
4. d
4. a 4. e 4. d
5. a
5. a 5. f 5. a
6. c 6. i
7. c 7. h
Test II
8. b 8. c Test II
1. Long Nose Plier
9. d 9. d 1. m 6. m
2. Hand Vise V Block
1O.a 10. a 2. c 7. h
with clamp
11. a 3. c 8. d
3. Machinist Vise
12. a 4. Oxy Acetylene 4. d 9. c
13. c Wrench 5. h 10. m
14. b 5. Half-round File
15. d 6. Flat File
7. Steel Tape
8. Adjustable Wrench
9. Tool Maker Clamp
10. Prick punch
Answer Key
References
Books:
1. TESDA (2016) K-12 Basic Education Curriculum TLE Learning
Module in Shielded Metal Arc Work (SMAW) Grade 7 and 8
Internet Sources:
1. https://www.toolsadviser.com/maintenance-of-tools-and-equipment/
2. https://www.dreamstime.com/stock-illustration-measurement-boy-
using-ruler-to-measure-something-image53326751
3. https://unsplash.com/s/photos/welding?fbclid=IwAR0UV5BzDyumU0
ZBMBbKULqDnLg-lhxnEeqxtid2Ib_p4nWiMbSgXkpCxkg
4. https://4-pics-1-word.com/4-pics-1-word-4-letters/
5. https://4-pics-1-word.com/4-pics-1-word-cheats-4-letters/4-pics-1-
word-hammer/
6. https://heavy.com/4-pics-1-word-cheats/2014/04/knife-welder-saw-
pliers/
7. https://4pics1word-answers.com/level-1765/
8. https://www.google.com/search?q=pictures+of+komelon+pull+push+r
ule&tbm=isch&ved=2ahUKEwiUtZqH673qAhVuEqYKHaWFC9YQ2-
cCegQIABAA&oq=pictures+of+komelon+pull+push+rule&gs_lcp=Cg
NpbWcQA1DzighY0qYIYPi0CGgAcAB4AIABc4gB3QaSAQMwLjiYA
QCgAQGqAQtnd3Mtd2l6LWltZw&sclient=img&ei=LtQFX5TmLu6km
AWli66wDQ&bih=754&biw=1519&rlz=1C1CHBD_enPH904PH904&h
l=en#imgrc=g8iii8x0vb9RiM
9. https://www.princessauto.com/en/detail/200-ft-60-meters-open-reel-
tape-measure/A-p8611063e
10. https://www.123rf.com/photo_103085150_steel-rule-%E2%80%93-a-
plan-view-of-a-steel-ruler-showing-metric-and-imperial-
measurements-isolated-on-a-whi.html
11. https://www.amazon.in/Visko-Tools-VISKO-231-
Square/dp/B01BWMLZIA
12. https://www.grainger.com/product/INSIZE-Combination-Square-Set-
462X98?fbclid=IwAR1HxwWrxq6niIdc_aEEziNX9O_5HtJDBAKqh1i1
zGP3jYM5DER0YHnXGwc
13. https://www.pinterest.ph/pin/118078821465329808/
14. http://www.technologystudent.com/equip1/vernier3.htm
15. https://www.amazon.com/PENCIL-MARKING-COMPASS-SCRIBER-
DIVIDER/dp/B01M0R0LG6
16. https://www.stanleytools.com/products/hand-tools/cutting-
tools/hacksaws/12-in-solid-frame-hacksaw/stht20138
17. https://www.toolstation.com/mill-file/p74706
18. https://www.slideshare.net/salmanranaw/k-to-12-smaw-welding-
learning-module?fbclid=IwAR2O-
LjNtREM5pRuf9tyK1cCmjuFElQRJsTS15mV9OoFk_273LsiU0fxD8Y
19. https://en.wikipedia.org/wiki/Hand_scraper
27
20. http://www.depedbataan.com/resources/9/k_to_12_smaw_welding_l
earning_module.pdf?fbclid=IwAR2P_2jYWwOSZajo0RmxR-
I93ijkH9kOECqn5eGzsYnggJooQmU6YRngK_Y
21. https://www.amazon.com/Estwing-E3-24BP-Hammer-Cushion-
Handle/dp/B000KL0O4Q
22. https://www.amazon.com/Welding-Chipping-Hammers-welding-
chipping/dp/B004F7LJAY
23. https://www.r-techwelding.co.uk/metal-chipping-hammer/
24. https://www.toolstation.com/adjustable-wrench-set/p62431
25. https://www.amazon.in/Hobart-770078-Welding-Oxy-Acetylene-
Wrench/dp/B01N30TQI6
26. https://www.wonkeedonkeetools.co.uk/toolmakers-clamps/what-are-
toolmaker-s-clamps
27. https://www.amazon.com/TEKTON-Malleable-C-Clamp-Opening-
4027/dp/B000NY6QO2
28. https://www.amazon.com/Irwin-Tools-Drill-Press-
226340/dp/B0001LQY4O
29. https://www.calmeenyv.com/index.php?main_page=product_info&pro
ducts_id=520346
30. https://www.amazon.com/Yost-Tools-Vises-Machinist-
Vise/dp/B015Z8NGHA
31. https://www.amazon.com/VISE-GRIP-Original-Curved-Locking-
702L3/dp/B00004YO5L
32. https://www.gigatools.ph/products/stanley-dynagrip-combination-
pliers-8-84-029
33. https://en.wikipedia.org/wiki/Needle-
nose_pliers#/media/File:Klein_Tools_D203-6.jpg
34. https://www.toolstation.com/side-cutting-pliers/p84542
35. https://www.grainger.com/product/PROTO-Thin-Nose-Slip-Joint-
Pliers-3R186
28
Printed in the Philippines by