Professional Documents
Culture Documents
Bearing Capacity Calculation
Bearing Capacity Calculation
Safe bearing capacity of footing at 2.00 m below EGL has been calculated in accordence with the provisions
laid down in IS : 6403 based on the geotechnical parameters from laboratory test results of Soil samples at
Rabindra Mahavidyalaya, Champadanga.
Bulk density b =
Submerge density sub =
Cohesion C =
Angle of internal friction =
1.94
0.94
3.55
0
t/m3 =
t/m3 =
t/m2 =
degrees
0.00194 kg/cm3
0.00094 kg/cm3
0.00355 kg/cm2
0 degrees
5.14
0
2.000 M
0M
=
=
dq = d =
2M
200 cm
1 + 0. 2
=
Inclination factor =
Dt
1.27
)
N = tan( +
4
2
=
1.0
1.0
150 cm
0.5
c N c s c d c ic
=
4.232 Kg/cm2
= 423.1933 KN/m2
2.5
169 KN/m2
17 t/m2
Considering the settelment aspect and local variations etc, an allowable bearing capacity of the order of
10T/m2 can thus be safely considered. The actual bearing pressure does not exceeds this value.