Professional Documents
Culture Documents
A well designed water collection system, through set of Gutters and Drain Pipes at eave-end, not
only protects property and building but also helps in water harvesting.
Among the most common reasons for moist basements and crawl spaces is an inadequate gutter,
downspout, and drain system. Gutters are required at all locations where water drains off the
roof. Gutters and drains need to be adequate in size and quantity to handle all but the heaviest of
torrential downpours. Drainage of water from the roof is extremely important in order to achieve
complete weather-proofing of the building.
Downspouts or leaders are critical in dispersing water away from the house.
The purpose of the entire system is to divert the water collected on the roof away from the house
and its foundation. The diverted water may be drained into a storm sewer or an on-side french
drain or a similar system.
2. Continuous Aluminum Gutters and Downspouts (the typical rain gutter system):
The most popular residential gutter type is seamless aluminum also known as formed, Ogee, or
OG. Seamless gutters have the color of your choice bonded to the metal when the metal is made.
The metal comes on a long roll and its formed into the shape and length you need, at the job site.
Advantages: This system can be easy installed. Youre saving money because you dont
have to paint the gutters.
Disadvantages: It is susceptible to damage by heavy ladders, as well as long-term
deterioration by ultraviolet light from the sun.
Advantages: It has a good look, never rust and never needs painting. It also adds value to
your home and requires less maintenance than aluminum or other materials.
Disadvantages: It is very expensive. Copper gutters can oxidize and turn green over time
unless they are treated.
Steel gutters are strong and if they can last long time if they are well maintained. Stainless-steel
gutters are strong and rust-free, and maintain their high sheen for years.
Advantages: Steel gutters can stand up to ladders and fallen branches better than
aluminum.
Disadvantages: Galvanized steel eventually rusts through and need to be painted, inside
and out. Stainless steel is expensive.
4. Vinyl and Plastic Gutters and Downspouts:
This is the most commonly used material. It is easily installed by the homeowner, and when
properly installed is a good product.
Advantages: Easy installation and not expensive. Quality vinyl gutters retain their color;
remain flexible; are relatively easy to repair or replace; dont rust or corrode; have a
greater dent resistance than lightweight aluminum and can be painted, if desired.
Disadvantages: It can be susceptible to damage by heavy ladders, as well as long-term
deterioration by ultraviolet light from the sun.
5. Integral Gutters:
This system is formed by the end of the rafters and fascia in a sloped roof. The gutter is lined
with a built-up roofing material and has the advantage of being able to hold more water than
most of the other types of gutters. It was a popular gutter style in the 1960s.
Advantages: They are able to hold more water than other types.
Disadvantages: The potential for leaks, which can result in damage to the framing, fascia,
soffit, and sheathing of the roof. It needs to be inspected every few years and the lining
replaced every five years.
6. Splash Blocks:
Box gutters can be found on older homes, multifamily dwellings, old stores, factories, etc. They were by and large one of the most popular rain
collection devices built into and onto structures built between 1880 and 1925. A box gutter does
not hang onto the edge of a roof or on the edge or side of a house as many modern pre-formed
gutters do. A box gutter is actually built into the bottom of the roof or into the roof overhang.
7. Fascia Gutter:
A fascia gutter is a rain ware system that is fixed to a fascia board. It is often a custom made
rainwater gutter that is fixed to the ends of the rafters and also performs the function of a fascia
board. It is most commonly found in the Western part of the United States.
Read the rest of this entry