Blast joints, expansion joints, and polished bore receptacles (PBRs) are auxiliary completion components used in oil and gas wells. Blast joints are pipe sections 2 to 20 feet long that withstand erosion from fluid flow from perforations. Expansion joints eliminate stress from tubing string movement by allowing expansion and contraction without compromising integrity. PBRs consist of a sealed polished bore attached to a packer and long seal assembly attached to tubing to seal into the polished bore.
Blast joints, expansion joints, and polished bore receptacles (PBRs) are auxiliary completion components used in oil and gas wells. Blast joints are pipe sections 2 to 20 feet long that withstand erosion from fluid flow from perforations. Expansion joints eliminate stress from tubing string movement by allowing expansion and contraction without compromising integrity. PBRs consist of a sealed polished bore attached to a packer and long seal assembly attached to tubing to seal into the polished bore.
Blast joints, expansion joints, and polished bore receptacles (PBRs) are auxiliary completion components used in oil and gas wells. Blast joints are pipe sections 2 to 20 feet long that withstand erosion from fluid flow from perforations. Expansion joints eliminate stress from tubing string movement by allowing expansion and contraction without compromising integrity. PBRs consist of a sealed polished bore attached to a packer and long seal assembly attached to tubing to seal into the polished bore.
Receptacle Blast Joint Available in lengths of 10 to 30 ft. long. Blast joints are heavy walled joints of pipe, available in PBRs (Fig 6-13) consist of a polished lengths between 2 and 20 feet. Blast joints are seal bore above the packer which is installed in the completion string to withstand the attached to the packer and a long seal scouring action of fluid flow from perforations (External assembly which is attached to the erosion). tubing and seals into the polished bore.
Expansion Joint
Expansion joints are designed to eliminate the
stress produced during these changes allowing the tubing string to expand and contract without losing the integrity of the production string. They are commonly produced in stroke lengths of 2 to 20 feet. Clutch Type Spline Type