Professional Documents
Culture Documents
Operations PDF
Operations PDF
1
1. Turning & Related Operations
Turning a machining v
Rotational Speed: N =
process in which a Do
single-point tool remove Do D f = 2d
material from the
surface of a rotating Feed rate: f r = Nf
work piece. (Lathe) L
Time of machining: Tm =
fr
Material Removal Rate:
v MRR = vfd
Do Df
d
f
L 2
Operations related to Turning
Contour turning Chamfering
Chuck
Collet
Face plate
4
Engine Lathe
Headstock
Tailstock
Tool
post
Carriage Bed
Threaded
Lead Screw
5
Other Lathes & Turning Machine
Toolroom Lathe and Speed Lathe
Turret Lathe
The tailstock is replaced with a turret
Chucking Machines No tailstock
Automatic Bar Machine Similar to chuck
machine but with a collet
A single- and multiple-spindle bar machines
NC Lathe
6
Boring Machining
7
2. Drilling & Related Operations
Geometry of Twist drill
Shank, Neck and Drill body
Helix angle, Point angle, Flute, cutting
edge, Chisel edge, Margin
Cutting conditions
Spindle: N =
v Feed rate: f = Nf
r
f(in/rev)
D D 2 f r
Metal Removal Rate: MRR =
t+A 4
Machining time: Tm =
f r For a through hole
A d
d Tm = For a blind hole
t fr
8
Twist Drill and Drilling Operations
Drill press
Upright drill
Bench drill
Radial drill
Gang drill - 2-6 drills together
NC drill
Vice, Jig and fixture
10
3. Milling
Up Milling Down Milling
Milling Conventional face
A machine operation in which a
work part is fed past a rotating
cylindrical tool with multiple
edges. (milling machine) Partial face
Slab
Types
Peripheral milling End
Slab, slotting, side and slotting
straddle milling Profile
Up Milling (Conventional) &
down milling (Climb)
side Contour
Facing milling
Conventional face, Partial
face, End, Profile, Pocket & Pocket
contour millings straddle Face Milling
11
Peripheral Milling
Cutting conditions
Milling cutters
Plain milling cutters
Form milling cutters Radial Rake
Angle
Face milling cutters Relief
Angle
End milling cutters Clearance
Cutting conditions Angle
v
Spindle rotation speed:
N=
D
Feed rate: f r = Nnt f
Material Removal Rate: MRR = wdf r
12
Milling Machines
Knee-and-column Milling
Machine
Horizontal and Vertical types
Universal and Ram types
Bed-type Mill
Planer-type Mills the largest Horizontal Vertical
category
Tracer (profile) Mill
reproduce an irregular part
geometry
CNC Milling machine
Universal Ram
Bed-type mill
13
Machining Centers
Machining center highly automated
machine tool capable of performing
multiple machining operations under CNC
control.
Automatic tool changer
Pallet shuttles
Automatic workpart positioning
CNC turning center
14
A CNC mill-turn center
A series of operations without human interactions
A part
From a casting
From a round stock From another casting
15
5. Other Machining Operations
Shaping and planing
A single-point tool moves linearly relative to the work part
Shaping - A tool moves
Planing A workpart moves
Broaching
Performed by a multiple-tooth cutting tool by moving linearly
relative to the work in the direction of the tool axis.
Sawing
Hacksawing, Bandsawing, and Circular sawing
16
Broaching
Semifinishing
teeth
17
Sawing