Professional Documents
Culture Documents
CE133P-Reinforced Concrete Design: Quiz 3: One-Way and Two-Way Slab
CE133P-Reinforced Concrete Design: Quiz 3: One-Way and Two-Way Slab
1. For the given simply supported one-way slab with initial depth B, design and
sketch the
a. main reinforcements of the slab parallel to length A (20 pts)
b. spacing of temperature bars perpendicular to main reinforcements at
any arbitrary length (10 pts)
Use fc = 21 MPa, db=12mm, fy=275 MPa.
(Note: if the initial slab thickness doesnt suffice, compute for the required
thickness of slab as prescribed by NSCP)
2. Analyze and design the two-way slab at the middle strip area parallel to length
B. Choose any of the column in the selection table and orient the column
I, such that its strength will be maximized in the design of the whole structural
assembly. Assume that the connection of the column to the slab is fixed. Also
assume that all criteria are met so that direct analysis / MDM can be used.