Professional Documents
Culture Documents
Previous Screen
Specifications
3114, 3116 and 3126 Engines for Caterpillar Built Machines
Media Number -SENR3582-16 Publication Date -01/02/2007 Date Updated -20/02/2007
i01121426
Illustration 1 g00623399
The piston cooling jets (1) must be checked for the location of the stream of oil. Insert a drill rod with
a diameter of 1.3 mm (0.05 inch) into the orifice. This drill rod simulates the stream of oil under
normal operating pressure. The drill rod must pass through a circle with a diameter of 5.0 mm (0.20
inch) at location (A). Place the drill rod in the second orifice. The drill rod must pass through a circle
with a diameter of 13.0 mm (0.51 inch) at location (B). The circles are located at depth (G). The
location of the circles is a distance of 50.0 mm (1.97 inch) below the top of the cylinder block.
Use the following dimensions to locate the piston cooling jet assembly.
Illustration 2 g00293305
The piston cooling jets (1) must be checked for the location of the stream of oil. Insert a drill rod with
a diameter of 1.90 mm (0.075 inch) into the jet. This drill rod simulates the stream of oil under normal
operating pressure. The drill rod must pass through a circle with a diameter of 5.0 mm (0.20 inch) in
location (A). The circle is located at depth (G). The location of the circle is a distance of 50.0 mm
(1.97 inch) below the top of the cylinder block.