The document summarizes the design of precast concrete piles to support a green power development foundation. It specifies pile dimensions of 300mm square and 6500mm length. Using Hiley's formula and parameters from Reynolds' handbook, it calculates the settlement load capacity of each pile as 1440kN based on hammer specifications, soil properties, and dynamic test results. Applying a factor of safety of 0.33 gives a maximum allowable working load of 480kN per pile, or 466kN excluding the pile weight.
The document summarizes the design of precast concrete piles to support a green power development foundation. It specifies pile dimensions of 300mm square and 6500mm length. Using Hiley's formula and parameters from Reynolds' handbook, it calculates the settlement load capacity of each pile as 1440kN based on hammer specifications, soil properties, and dynamic test results. Applying a factor of safety of 0.33 gives a maximum allowable working load of 480kN per pile, or 466kN excluding the pile weight.
The document summarizes the design of precast concrete piles to support a green power development foundation. It specifies pile dimensions of 300mm square and 6500mm length. Using Hiley's formula and parameters from Reynolds' handbook, it calculates the settlement load capacity of each pile as 1440kN based on hammer specifications, soil properties, and dynamic test results. Applying a factor of safety of 0.33 gives a maximum allowable working load of 480kN per pile, or 466kN excluding the pile weight.
Adopting Hiley's formula to asses pile capacity for compresssive load under dynamic conditions as per Reinforced concrete designers hand book Charles E Reynolds and James C Steedman
Pile size (square) = 300 mm
Pile length (upto SPT 50) = 6500 mm Bore hole 1 Weight of hammer, w = 30 kN Actual drop of free falling hammer, h1 = 900 mm Factor for hammer drop = 0.8 Reynolds hand book Tb.193 Weight of helmet, dolly & stationary parts of hammer, p1 = 5 kN Weight of single pile, p2 = 14.04 kN Total Weight, P = p1 + p2 = 19.04 kN P/W = 0.63 Efficiency of blow, e = 0.65 Reynolds hand book Tb.193 Compression factor, c (medium driving cdn) = 0.24 Reynolds hand book Tb.193 Peneteration per blow = 4 mm Number of blows for final unit length of peneteration, n = 0.25 no Non Dimensional factor, 1 = 25.4 mm Reynolds hand book Tb.193
Effective drop of hammer, H1 = 720 mm
Settlement load, Wm = {(w x H1 x e x n) / (1 + 1 x c x n)} + w + P
= 1440 kN Reynolds hand book Tb.193
Factor of saftey, k = 0.33 Reynolds hand book Tb.193