Professional Documents
Culture Documents
M7817v1 0 PDF
M7817v1 0 PDF
Preface
INTERNATIONAL. We take every care in the preparation of this document, but no
guarantee is given as to the correctness of its contents. Our products are under
continual improvement and we reserve the right to make changes without notice.
Trademarks
All trademarks in this manual are properties of their respective owners.
MSI is registered trademark of Micro-Star Intl Co.,Ltd.
NVIDIA is registered trademark of NVIDIA Corporation.
ATI is registered trademark of AMD Corporation.
AMD is registered trademarks of AMD Corporation.
Intel is registered trademarks of Intel Corporation.
Windows is registered trademarks of Microsoft Corporation.
AMI is registered trademark of American Megatrends Inc.
Award is a registered trademark of Phoenix Technologies Ltd.
Sound Blaster is registered trademark of Creative Technology Ltd.
Realtek is registered trademark of Realtek Semiconductor Corporation.
JMicron is registered trademark of JMicron Technology Corporation.
Netware is registered trademark of Novell, Inc.
Lucid is trademark of LucidLogix Technologies, Ltd.
VIA is registered trademark of VIA Technologies, Inc.
ASMedia is registered trademark of ASMedia Technology Inc.
iPad, iPhone, and iPod are trademarks of Apple Inc.
Qualcomm Atheros and Killer are trademarks of Qualcomm Atheros Inc.
Revision History
Revision Revision History Date
G52-78171X1
Safety Instructions
Always read the safety instructions carefully.
Preface
Battery Information
European Union:
Batteries, battery packs, and accumulators should not be disposed
of as unsorted household waste. Please use the public collection
system to return, recycle, or treat them in compliance with the local
regulations.
Taiwan:
For better environmental protection, waste batteries should be
collected separately for recycling or special disposal.
California, USA:
The button cell battery may contain perchlorate material and requires
special handling when recycled or disposed of in California.
For further information please visit:
http://www.dtsc.ca.gov/hazardouswaste/perchlorate/
FCC-B Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a Class
Preface
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the measures listed below.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/television technician for help.
Notice 1
The changes or modifications not expressly approved by the party responsible for
compliance could void the users authority to operate the equipment.
Notice 2
Shielded interface cables and A.C. power cord, if any, must be used in order to
comply with the emission limits.
VOIR LA NOTICE DINSTALLATION AVANT DE RACCORDER AU RESEAU.
Micro-Star International
MS-7817
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
) this device may not cause harmful interference, and
2) this device must accept any interference received, including interference that
may cause undesired operation.
CE Conformity
Hereby, Micro-Star International CO., LTD declares that this device is
in compliance with the essential safety requirements and other relevant
provisions set out in the European Directive.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
Preface
uncontrolled environment. This equipment and its antenna should be installed and
operated with minimum distance 20 cm between the radiator and your body. This
equipment and its antenna must not be co-located or operating in conjunction with
any other antenna or transmitter.
<>
Preface
(Pb) (Hg) (Cd) (Cr6+) (PBB) (PBDE)
(Battery)
/
(Cable/ Connector)
/ (Chassis/ Other)
(CD, DVD)
(Optical Disk Driver)
(Hard Disk Driver)
(PCAs)*
(I/O Device)
(Mouse, Keyboard)
(LCD Panel)
(Memory)
(Processor and Heatsink)
(CDDVD)
(Power Supply)
(Remote Control)
(Speakers)
(TV Tunner)
(Web Camera)
(Wireless Cards)
*(PCB)IC
:SJ/T11363-
2006
:SJ/T11363-
2006EU RoHS
<
>EPUP (Environmental Protection Use Period)
EPUP-
(SJ/Z 11388-2009)EPUP,
WEEE Statement
WEEE (Waste Electrical and Electronic Equipment)
Preface
ENGLISH
To protect the global environment and as an environmentalist, MSI must
remind you that...
Under the European Union (EU) Directive on Waste Electrical and
Electronic Equipment, Directive 2002/96/EC, which takes effect on August 13, 2005,
products of electrical and electronic equipment cannot be discarded as municipal
wastes anymore, and manufacturers of covered electronic equipment will be
obligated to take back such products at the end of their useful life. MSI will comply
with the product take back requirements at the end of life of MSI-branded products
that are sold into the EU. You can return these products to local collection points.
DEUTSCH
Hinweis von MSI zur Erhaltung und Schutz unserer Umwelt
Gem der Richtlinie 2002/96/EG ber Elektro- und Elektronik-Altgerte drfen
Elektro- und Elektronik-Altgerte nicht mehr als kommunale Abflle entsorgt werden.
MSI hat europaweit verschiedene Sammel- und Recyclingunternehmen beauftragt,
die in die Europische Union in Verkehr gebrachten Produkte, am Ende seines
Lebenszyklus zurckzunehmen. Bitte entsorgen Sie dieses Produkt zum gegebenen
Zeitpunkt ausschliesslich an einer lokalen Altgertesammelstelle in Ihrer Nhe.
FRANAIS
En tant qucologiste et afin de protger lenvironnement, MSI tient rappeler ceci...
Au sujet de la directive europenne (EU) relative aux dchets des quipement
lectriques et lectroniques, directive 2002/96/EC, prenant effet le 13 aot 2005,
que les produits lectriques et lectroniques ne peuvent tre dposs dans les
dcharges ou tout simplement mis la poubelle. Les fabricants de ces quipements
seront obligs de rcuprer certains produits en fin de vie. MSI prendra en compte
cette exigence relative au retour des produits en fin de vie au sein de la communaut
europenne. Par consquent vous pouvez retourner localement ces matriels dans
les points de collecte.
MSI
, , ....
()
( WEEE 2002/96/EC), 13
2005 , ,
, ,
. MSI
, MSI
EC, .
.
ESPAOL
MSI como empresa comprometida con la proteccin del medio ambiente,
Preface
recomienda:
Bajo la directiva 2002/96/EC de la Unin Europea en materia de desechos y/o
equipos electrnicos, con fecha de rigor desde el 13 de agosto de 2005, los
productos clasificados como elctricos y equipos electrnicos no pueden ser
depositados en los contenedores habituales de su municipio, los fabricantes de
equipos electrnicos, estn obligados a hacerse cargo de dichos productos al
termino de su perodo de vida. MSI estar comprometido con los trminos de
recogida de sus productos vendidos en la Unin Europea al final de su periodo de
vida. Usted debe depositar estos productos en el punto limpio establecido por el
ayuntamiento de su localidad o entregar a una empresa autorizada para la recogida
de estos residuos.
NEDERLANDS
Om het milieu te beschermen, wil MSI u eraan herinneren dat.
De richtlijn van de Europese Unie (EU) met betrekking tot Vervuiling van Electrische
en Electronische producten (2002/96/EC), die op 13 Augustus 2005 in zal gaan
kunnen niet meer beschouwd worden als vervuiling. Fabrikanten van dit soort
producten worden verplicht om producten retour te nemen aan het eind van hun
levenscyclus. MSI zal overeenkomstig de richtlijn handelen voor de producten
die de merknaam MSI dragen en verkocht zijn in de EU. Deze goederen kunnen
geretourneerd worden op lokale inzamelingspunten.
SRPSKI
Da bi zatitili prirodnu sredinu, i kao preduzee koje vodi rauna o okolini i prirodnoj
sredini, MSI mora da vas podesti da
Po Direktivi Evropske unije (EU) o odbaenoj ekektronskoj i elektrinoj opremi,
Direktiva 2002/96/EC, koja stupa na snagu od 13. Avgusta 2005, proizvodi koji
spadaju pod elektronsku i elektrinu opremu ne mogu vie biti odbaeni kao obian
otpad i proizvoai ove opreme bie prinueni da uzmu natrag ove proizvode na
kraju njihovog uobiajenog veka trajanja. MSI e potovati zahtev o preuzimanju
ovakvih proizvoda kojima je istekao vek trajanja, koji imaju MSI oznaku i koji su
prodati u EU. Ove proizvode moete vratiti na lokalnim mestima za prikupljanje.
POLSKI
Aby chroni nasze rodowisko naturalne oraz jako firma dbajca o ekologi, MSI
przypomina, e...
Zgodnie z Dyrektyw Unii Europejskiej (UE) dotyczc odpadw produktw
elektrycznych i elektronicznych (Dyrektywa 2002/96/EC), ktra wchodzi w ycie 13
sierpnia 2005, tzw. produkty oraz wyposaenie elektryczne i elektroniczne nie
mog by traktowane jako mieci komunalne, tak wic producenci tych produktw
bd zobowizani do odbierania ich w momencie gdy produkt jest wycofywany z
uycia. MSI wypeni wymagania UE, przyjmujc produkty (sprzedawane na terenie
Unii Europejskiej) wycofywane z uycia. Produkty MSI bdzie mona zwraca w
wyznaczonych punktach zbiorczych.
TRKE
evreci zelliiyle bilinen MSI dnyada evreyi korumak iin hatrlatr:
Preface
ESKY
Zle nm na ochran ivotnho prosted - spolenost MSI upozoruje...
Podle smrnice Evropsk unie (EU) o likvidaci elektrickch a elektronickch
vrobk 2002/96/EC platn od 13. srpna 2005 je zakzno likvidovat elektrick
a elektronick vrobky v bnm komunlnm odpadu a vrobci elektronickch
vrobk, na kter se tato smrnice vztahuje, budou povinni odebrat takov vrobky
zpt po skonen jejich ivotnosti. Spolenost MSI spln poadavky na odebrn
vrobk znaky MSI, prodvanch v zemch EU, po skonen jejich ivotnosti. Tyto
vrobky mete odevzdat v mstnch sbrnch.
MAGYAR
Annak rdekben, hogy krnyezetnket megvdjk, illetve krnyezetvdknt
fellpve az MSI emlkezteti nt, hogy ...
Az Eurpai Uni (EU) 2005. augusztus 13-n hatlyba lp, az elektromos
s elektronikus berendezsek hulladkairl szl 2002/96/EK irnyelve szerint
az elektromos s elektronikus berendezsek tbb nem kezelhetek lakossgi
hulladkknt, s az ilyen elektronikus berendezsek gyrti kteless vlnak az
ilyen termkek visszavtelre azok hasznos lettartama vgn. Az MSI betartja
a termkvisszavtellel kapcsolatos kvetelmnyeket az MSI mrkanv alatt az
EU-n bell rtkestett termkek esetben, azok lettartamnak vgn. Az ilyen
termkeket a legkzelebbi gyjthelyre viheti.
ITALIANO
Per proteggere lambiente, MSI, da sempre amica della natura, ti ricorda che.
In base alla Direttiva dellUnione Europea (EU) sullo Smaltimento dei Materiali
Elettrici ed Elettronici, Direttiva 2002/96/EC in vigore dal 13 Agosto 2005, prodotti
appartenenti alla categoria dei Materiali Elettrici ed Elettronici non possono pi
essere eliminati come rifiuti municipali: i produttori di detti materiali saranno obbligati
a ritirare ogni prodotto alla fine del suo ciclo di vita. MSI si adeguer a tale Direttiva
ritirando tutti i prodotti marchiati MSI che sono stati venduti allinterno dellUnione
Europea alla fine del loro ciclo di vita. possibile portare i prodotti nel pi vicino
punto di raccolta
Contents
English11
Preface
Motherboard Specifications12
Optional Specifications14
Back Panel15
CPU & Heatsink Installation16
Memory Installation18
Internal Connectors19
BIOS Setup26
33
34
36
37
CPU 38
40
41
BIOS 48
Franais55
Spcifications56
Spcifications en option58
Panneau Arrire59
Installation du CPU et son ventilateur60
Installation de mmoire62
Connecteurs dalimentation63
Configuration BIOS70
Deutsch77
Spezifikationen78
Optionale Spezifikationen80
Rcktafel-bersicht81
CPU & Khlkrper Einbau82
Speicher84
Interne Anschlsse85
BIOS Setup92
99
100
Preface
102
103
104
106
107
BIOS114
121
122
124
125
CPU & 126
128
129
BIOS SetupBIOS 136
143
144
146
147
CPU 148
150
151
BIOS 158
165
166
168
I/O169
CPU170
172
173
BIOS180
10
English
Thank you for choosing the H81M-P33/ H81M-E33/ H87M-P33/ H87M-E33/ B85M-
P33/ B85M-E33 Series (MS-7817 v1.X) Micro-ATX motherboard. The H81M-P33/
H81M-E33/ H87M-P33/ H87M-E33/ B85M-P33/ B85M-E33 Series motherboards
are based on Intel H81/ H87/ B85 chipset for optimal system efficiency. Designed to
fit the advanced Intel LGA1150 processor, the H81M-P33/ H81M-E33/ H87M-P33/
English
H87M-E33/ B85M-P33/ B85M-E33 Series motherboards deliver a high performance
and professional desktop platform solution.
Layout
USB3.0 ports
DVI-D port
(for H81M-P33/
H87M-P33/ B85M-P33)
SYSFAN2
HDMI port
(for H81M-E33/
H87M-E33/ B85M-E33)
JPWR1
VGA port
JUSB_PW1
DIMM1
DIMM2
SYSFAN1
T:Line-In
M:Line- Out
B:MIC-Int
PCI _E1
JBAT1
PCI _E2
JCI1
SATA2
11
Motherboard Specifications
12
Internal 1x 24-pin ATX main power connector
Connectors 1x 4-pin ATX 12V power connector
4x SATA connectors
2x USB 2.0 connectors (supports additional 4 USB 2.0 ports)
1x 4-pin CPU fan connector
1x 4-pin system fan connector
1x 3-pin system fan connector
English
1x Front panel audio connector
2x System panel connectors
1x Chassis Intrusion connector
1x Clear CMOS jumper
2x USB power jumpers
13
Optional Specifications
Name
H81M-P33 H81M-E33 H87M-P33
Specification
Small Business
Not supported Not supported Supported
Advantage
Name
H87M-E33 B85M-P33 B85M-E33
Specification
Small Business
Supported Supported Supported
Advantage
14
Back Panel
Line-In
English
USB 2.0
VGA
Line-Out
HDMI
Mic
PS/2 Keyboard USB 3.0 USB 2.0
Mic
PS/2 Keyboard USB 3.0 USB 2.0
Off No link
15
CPU & Heatsink Installation
When installing a CPU, always remember to install a CPU heatsink. A CPU heatsink
is necessary to prevent overheating and maintain system stability. Follow the steps
below to ensure correct CPU and heatsink installation. Wrong installation can
damage both the CPU and the motherboard.
English
Video Demonstration
Watch the video to learn how to install CPU & heatsink. at the
address below.
http://youtu.be/bf5La099urI
1. Push the load lever down to unclip it and lift to the fully open position.
2. The load plate will automatically lift up as the load lever is pushed to the fully
open position.
Important
Do not touch the socket contacts or the bottom of the CPU.
3. Align the notches with the socket alignment keys. Lower the CPU straight down,
without tilting or sliding the CPU in the socket. Inspect the CPU to check if it is
properly seated in the socket.
4. Close and slide the load plate under the retention knob. Close and engage the
load lever.
CPU notches
Alignment Key
16
5. When you press down the load lever the PnP cap will automatically pop up from
the CPU socket. Do not discard the PnP cap. Always replace the PnP cap if the
CPU is removed from the socket.
6. Evenly spread a thin layer of thermal paste (or thermal tape) on the top of the
CPU. This will help in heat dissipation and prevent CPU overheating.
Thermal paste
English
7. Locate the CPU fan connector on the motherboard.
8. Place the heatsink on the motherboard with the fans cable facing towards the
fan connector and the fasteners matching the holes on the motherboard.
9. Push down the heatsink until the four fasteners get wedged into the holes on
the motherboard. Press the four fasteners down to fasten the heatsink. As each
fastener locks into position a click should be heard.
10. Inspect the motherboard to ensure that the fastener-ends have been properly
locked in place.
11. Finally, attach the CPU fan cable to the CPU fan connector on the motherboard.
Important
Confirm that the CPU heatsink has formed a tight seal with the CPU before booting
your system.
Whenever the CPU is not installed, always protect the CPU socket pins by
covering the socket with the plastic cap.
If you purchased a separate CPU and heatsink/ cooler, Please refer to the
documentation in the heatsink/ cooler package for more details about installation.
17
Memory Installation
Video Demonstration
Watch the video to learn how to install memories at the address below.
http://youtu.be/76yLtJaKlCQ
English
Important
DDR3 memory modules are not interchangeable with DDR2, and the DDR3
standard is not backward compatible. Always install DDR3 memory modules in
DDR3 DIMM slots.
To ensure system stability, memory modules must be of the same type and density
in Dual-Channel mode.
18
Internal Connectors
JPWR1~2: ATX Power Connectors
These connectors allow you to connect an ATX power supply. To connect the ATX
power supply, align the power supply cable with the connector and firmly press the
cable into the connector. If done correctly, the clip on the power cable should be
hooked on the motherboards power connector.
English
Video Demonstration
Watch the video to learn how to install power supply connectors.
http://youtu.be/gkDYyR_83I4
1 1.+ +1 B OK
2 1 2
1 0. VS R nd
.+ 2 V
1 .5 W u
3 V
.3
9 .P ro
V
8 .G 5V un
7 .+ ro nd
6 .G 5V u
5 + ro V
4 .G 3.3 3V
1 .G
.
3 .+ 3.
.G ro
2
2 .+
ro un
d
1
u d
n
d
2 3.+ +5 V
4
2 . 5 s n d
.G 5 V
2 1.+ Re ou un d
ro
2
2 0. Gr ro un #
u
V
2 . G o Nd
n
d
1 8. Gr -O un
JPWR2
9
1 7. PS o
3 .+1
.+ 2
1 6. Gr V V
1 V
1 5. -12 .3
2
JPWR1
V
1 4. +3
d
1 3.
1
Important
Make sure that all the power cables are securely connected to a proper ATX power
supply to ensure stable operation of the motherboard.
o
6 DT N
P
.
in
4 SI
.
2
.
9 . R r ou T
.R T n
7 G U
I S d
5 . SO C D
.
3 .D
1
19
SATA1~4: SATA Connectors
This connector is a high-speed SATA interface port. Each connector can connect to
one SATA device. SATA devices include disk drives (HDD), solid state drives (SSD),
and optical drives (CD/ DVD/ Blu-Ray).
Video Demonstration
Watch the video to learn how to Install SATA HDD.
English
http://youtu.be/RZsMpqxythc
Important
Many SATA devices also need a power cable from the power supply. Such devices
include disk drives (HDD), solid state drives (SSD), and optical drives (CD / DVD /
Blu-Ray). Please refer to the devices manual for further information.
Many computer cases also require that large SATA devices, such as HDDs, SSDs,
and optical drives, be screwed down into the case. Refer to the manual that came
with your computer case or your SATA device for further installation instructions.
Please do not fold the SATA cable at a 90-degree angle. Data loss may result
during transmission otherwise.
SATA cables have identical plugs on either sides of the cable. However, it is
recommended that the flat connector be connected to the motherboard for space
saving purposes.
ro T
u RU
n
d
20
CPUFAN,SYSFAN1~2: Fan Power Connectors
The fan power connectors support system cooling fans with +12V. If the motherboard
has a System Hardware Monitor chipset on-board, you must use a specially designed
fan with a speed sensor to take advantage of the CPU fan control. Remember to
connect all system fans. Some system fans may not connect to the motherboard and
will instead connect to the power supply directly. A system fan can be plugged into
any available system fan connector.
English
CPUFAN/ SYSFAN1 SYSFAN2
1 .+ o U
.G 1
2 .N
1 + en e
ro 2V se
3
.G 1 s d
2 .S pe
u
.
ro 2V e Co
3 .S
n
d
u
4
n
d
n
tr
o
l
Important
Please refer to your processors official website or consult your vendor to find
recommended CPU heatsink.
These connectors support Smart Fan Control with liner mode. The Command
Center utility can be installed to automatically control the fan speeds according to
the CPUs and systems temperature.
If there are not enough ports on the motherboard to connect all system fans,
adapters are available to connect a fan directly to a power supply.
Before first boot up, ensure that there are no cables impeding any fan blades.
21
JFP1, JFP2: System Panel Connectors
These connectors connect to the front panel switches and LEDs. The JFP1
connector is compliant with the Intel Front Panel I/O Connectivity Design Guide.
When installing the front panel connectors, please use the optional M-Connector to
simplify installation. Plug all the wires from the computer case into the M-Connector
and then plug the M-Connector into the motherboard.
Video Demonstration
English
1
w
0
o
it
.N
w
ch
e
o 8.
r
P -
L
in
E
D
6 .-
.+
4 +
2
.
4 S CC ak
.V p 5 e
3 .V pe
C ea
.
9 .+
2 .S
C ke
JFP1
.R
5 r
7 -
JFP2
1
e R
5 .-
se e
.
3 .+
rv se
e
1
d Sw
r
H
t
D
D
it
L
ch
E
D
Important
On the connectors coming from the case, pins marked by small triangles are
positive wires. Please use the diagrams above and the writing on the optional M-
Connectors to determine correct connector orientation and placement.
The majority of the computer cases front panel connectors will primarily be
plugged into JFP1.
C un +
6 .U C
.U S
4 VC
2
d
.
9 .G SB 0-
.N r o 0
7 U B
o u +
5 .U CC
P nd
.
in
3 .V
1
Important
Note that the VCC and GND pins must be connected correctly to avoid possible
damage.
22
English
This connector allows you to connect the front audio panel located on your computer
case. This connector is compliant with the Intel Front Panel I/O Connectivity Design
This connector connects to a TPM (Trusted Platform Module). Please refer to the
3
L in
p 2
e D ta in
n
o N a p 1
h E R d ta pin 0
P _S ne e s & da ta pi
n
d o
a E h m s & da ta
e NS P ra re s a
.H E d F d s & d
TPM security platform manual for more details and usages.
9 .S ea R C ad dre ss &
P re s
7 H IC L
. .L C d d s
5 .M IC 3 P a d re
1 .L C a d et
3 .M 11 .LP C ad es k
JAUD1: Front Panel Audio Connector
1 9 .LP C R loc
n 7 .LP C C
io 5 .LP C
ct
23
3 .LP
1 1
English
Important
You can clear the CMOS RAM by shorting this jumper while the system is off.
Afterwards, open the jumper . Do not clear the CMOS RAM while the system is on
because it will damage the motherboard.
JUSB_PW1
(for back panel
USB ports & 1 1
PS/2 ports)
Support No Support (Default)
JUSB_PW2
1 1
(for onboard
USB connectors) Support No Support (Default)
24
PCI_E1~2: PCIe Expansion Slots
The PCIe slot supports the PCIe interface expansion card.
English
PCIe 2.0 x1 Slot
Important
When adding or removing expansion cards, always turn off the power supply and
unplug the power supply power cable from the power outlet. Read the expansion
cards documentation to check for any necessary additional hardware or software
changes.
25
BIOS Setup
The default settings offer the optimal performance for system stability in normal
conditions. You may need to run the Setup program when:
An error message appears on the screen during the system booting up, and
requests you to run SETUP.
You want to change the default settings for customized features.
English
Important
Please load the default settings to restore the optimal system performance and
stability if the system becomes unstable after changing BIOS settings. Select the
"Restore Defaults" and press <Enter> in BIOS to load the default settings.
If you are unfamiliar with the BIOS settings, we recommend that you keep the
default settings to avoid possible system damage or failure booting due to
inappropriate BIOS configuration.
Press DEL key to enter Setup Menu, F11 to enter Boot Menu
If the message disappears before you respond and you still need to enter BIOS,
restart the system by turning the computer OFF then back ON or pressing the
RESET button. You may also restart the system by simultaneously pressing <Ctrl>,
<Alt>, and <Delete> keys.
MSI additionally provides two methods to enter the BIOS setup. You can click the
GO2BIOS tab on MSI Fast Boot utility screen or press the physical GO2BIOS"
button (optional) on the motherboard to enable the system going to BIOS setup
directly at next boot.
Important
Please be sure to install the MSI Fast Boot utility before using it to enter the BIOS
setup.
26
Overview
After entering BIOS, the following screen is displayed.
Temperature monitor Language System
information
Model name
Virtual OC
English
Genie Button
Boot device
priority bar
BIOS menu
selection
BIOS menu
selection
Menu display
OC Menu
Important
Overclocking your PC manually is only recommended for advanced users.
Overclocking is not guaranteed, and if done improperly, can void your warranty or
severely damage your hardware.
If you are unfamiliar with overclocking, we advise you to use OC Genie for easy
overclocking.
27
Current CPU/ DRAM/ Ring Frequency
These items show the current frequencies of installed CPU, Memory and Ring.
Read-only.
CPU Ratio Mode [Auto]
Selects the CPU Ratio operating mode.
[Auto] This setting will be configured automatically by BIOS.
[Fixed Mode] Fixes the CPU ratio.
English
[Dynamic Mode] CPU ratio will be changed dynamically according to the CPU
loading.
Adjust CPU Ratio [Auto]
Sets the CPU ratio that is used to determine CPU clock speed. This item can only be
changed if the processor supports this function.
Adjusted CPU Frequency
Shows the adjusted CPU frequency. Read-only.
EIST [Enabled]
Enables or disables the Enhanced Intel SpeedStep Technology.
Intel Turbo Boost [Enabled]
Enables or disables the Intel Turbo Boost. This item appears when the installed
CPU supports this function.
[Enabled] Enables this function to boost CPU performance automatically
above rated specifications when system request the highest
performance state.
[Disabled] Disables this function.
Enhanced Turbo [Auto]
Enables or disables Enhanced Turbo function for all CPU cores to boost CPU
performance.
[Auto] This setting will be configured automatically by BIOS.
[Enabled] All CPU cores would be increased to maximum turbo ratio.
[Disabled] Disables this function.
Adjust Ring Ratio [Auto]
Sets the ring ratio. The valid value range depends on the installed CPU.
Adjusted Ring Frequency
Shows the adjusted Ring frequency. Read-only.
Adjust GT Ratio [Auto]
Sets the integrated graphics ratio. The valid value range depends on the installed
CPU.
Adjusted GT Frequency
Shows the adjusted integrated graphics frequency. Read-only.
DRAM Frequency [Auto]
Sets the DRAM frequency. Please note the overclocking behavior is not guaranteed.
28
Adjusted DRAM Frequency
Shows the adjusted DRAM frequency. Read-only.
DRAM Timing Mode [Auto]
Selects the memory timing mode.
[Auto] DRAM timings will be determined based on SPD (Serial Presence
Detect) of installed memory modules.
[Link] Allows user to configure the DRAM timing manually for all memory
English
channel.
[UnLink] Allows user to configure the DRAM timing manually for respective
memory channel.
Advanced DRAM Configuration
Press <Enter> to enter the sub-menu. This sub-menu will be activated after setting
[Link] or [Unlink] in DRAM Timing Mode. User can set the memory timing for each
memory channel. The system may become unstable or unbootable after changing
memory timing. If it occurs, please clear the CMOS data and restore the default
settings. (Refer to the Clear CMOS jumper/ button section to clear the CMOS data,
and enter the BIOS to load the default settings.)
Memory Fast Boot [Auto]
Enables or disables the initiation and training for memory every booting.
[Auto] This setting will be configured automatically by BIOS.
[Enabled] Memory will completely imitate the archive of first initiation and
first training. After that, the memory will not be initialed and trained
when booting to accelerate the system booting time.
[Disabled] The memory will be initialed and trained every booting.
DRAM Voltage [Auto]
Sets the memory voltage. If set to "Auto", BIOS will set memory voltage
automatically or you can set it manually.
Spread Spectrum
This function reduces the EMI (Electromagnetic Interference) generated by
modulating clock generator pulses.
[Enabled] Enables the spread spectrum function to reduce the EMI
(Electromagnetic Interference) problem.
[Disabled] Enhances the overclocking ability of CPU Base clock.
Important
If you do not have any EMI problem, leave the setting at [Disabled] for optimal
system stability and performance. But if you are plagued by EMI, select the value
of Spread Spectrum for EMI reduction.
The greater the Spread Spectrum value is, the greater the EMI is reduced, and
the system will become less stable. For the most suitable Spread Spectrum value,
please consult your local EMI regulation.
Remember to disable Spread Spectrum if you are overclocking because even a
slight jitter can introduce a temporary boost in clock speed which may just cause
29
your overclocked processor to lock up.
CPU Features
Press <Enter> to enter the sub-menu.
Hyper-Threading Technology [Enabled]
The processor uses Hyper-Threading technology to increase transaction rates
and reduces end-user response times. Intel Hyper-Threading technology treats
English
the multi cores inside the processor as multi logical processors that can execute
instructions simultaneously. In this way, the system performance is highly
improved.
[Enable] Enables Intel Hyper-Threading technology.
[Disabled] Disables this item if the system does not support HT function.
Active Processor Cores [All]
This item allows you to select the number of active processor cores.
Limit CPUID Maximum [Disabled]
Enables or disables the extended CPUID value.
[Enabled] BIOS will limit the maximum CPUID input value to circumvent
boot problems with older operating system that do not support
the processor with extended CPUID value.
[Disabled] Use the actual maximum CPUID input value.
Execute Disable Bit [Enabled]
Intels Execute Disable Bit functionality can prevent certain classes of malicious
buffer overflow attacks where worms attempt to execute code to damage the
system. It is recommended that keeps this item enabled always.
[Enabled] Enables NO-Execution protection to prevent the malicious
attacks and worms.
[Disabled] Disables this function.
Intel Virtualization Tech [Enabled]
Enables or disables Intel Virtualization technology.
[Enabled] Enables Intel Virtualization technology and allows a platform
to run multiple operating systems in independent partitions.
The system can function as multiple systems virtually.
[Disabled] Disables this function.
Hardware Prefetcher [Enabled]
Enables or disables the hardware prefetcher (MLC Streamer prefetcher).
[Enabled] Allows the hardware prefetcher to automatically pre-fetch
data and instructions into L2 cache from memory for tuning
the CPU performance.
[Disabled] Disables the hardware prefetcher.
30
Adjacent Cache Line Prefetch [Enabled]
Enables or disables the CPU hardware prefetcher (MLC Spatial prefetcher).
[Enabled] Enables adjacent cache line prefetching for reducing the
cache latency time and tuning the performance to the specific
application.
[Disabled] Enables the requested cache line only.
CPU AES Instructions [Enabled]
English
Enables or disables the CPU AES (Advanced Encryption Standard-New
Instructions) support. This item appears when a CPU supports this function.
[Enabled] Enables Intel AES support.
[Disabled] Disables Intel AES support.
Intel Adaptive Thermal Monitor [Enabled]
Enables or disables the Intel adaptive thermal monitor function to protect the
CPU from overheating.
[Enabled] Throttles down the CPU core clock speed when the CPU is
over the adaptive temperature.
[Disabled] Disables this function.
Intel C-State [Auto]
C-state is a processor power management technology defined by ACPI.
[Auto] This setting will be configured automatically by BIOS.
[Enabled] Detects the idle state of system and reduce CPU power
consumption accordingly.
[Disabled] Disable this function.
C1E Support [Disabled]
Enables or disables the C1E function for power-saving in halt state. This item
appears when "Intel C-State" is enabled.
[Enabled] Enables C1E function to reduce the CPU frequency and
voltage for power-saving in halt state.
[Disabled] Disables this function.
Package C State limit [Auto]
This item allows you to select a CPU C-state mode for power-saving when
system is idle. This item appears when "Intel C-State" is enabled.
[Auto] This setting will be configured automatically by BIOS.
[C0~C7s] The power-saving level from high to low is C7s, C7, C6, C3,
C2, then C0.
[No limit] No C-state limit for CPU.
LakeTiny Feature [Disabled]
Enables or disables Intel Lake Tiny feature with iRST for SSD. This item appears
when a installed CPU supports this function and "Intel C-State" is enabled.
[Enabled] Enhance the dynamic IO load adjusted performance for
accelerating the SSD speed.
[Disabled] Disables this feature.
31
Note: The following items will appear when "Intel Turbo Boost " is enabled.
Long Duration Power Limit (W) [Auto]
Sets the long duration TDP power limit for CPU in Turbo Boost mode.
Long Duration Maintained (s) [Auto]
Sets the maintaining time for "Long duration power Limit(W)".
Short Duration Power Limit (W) [Auto]
English
Sets the short duration TDP power limit for CPU in Turbo Boost mode.
CPU Current limit (A) [Auto]
Sets maximum current limit of CPU package in Turbo Boost mode. When the
current is over the specified limit value, the CPU will automatically reduce the
core frequency for reducing the current.
1/2/3/4-Core Ratio Limit [Auto]
These items only appear when a CPU that support this function is installed.
These items allow you to set the CPU ratios for different number of active cores
in turbo boost mode. These items appear when the installed processor supports
this function.
32
H81M-P33/ H81M-E33/ H87M-P33/ H87M-E33/ B85M-P33/ B85M-E33
(MS-7817 v1.X) Micro-ATX . H81M-P33/
H81M-E33/ H87M-P33/ H87M-E33/ B85M-P33/ B85M-E33
Intel H81/ H87/ B85 . Intel
LGA1150 H81M-P33/ H81M-E33/ H87M-P33/ H87M-
E33/ B85M-P33/ B85M-E33
.
Top : mouse CPUFAN
Bottom: keyboard
USB3.0 ports
DVI-D port
(for H81M-P33/
H87M-P33/ B85M-P33)
SYSFAN2
HDMI port
(for H81M-E33/
H87M-E33/ B85M-E33)
JPWR1
VGA port
JUSB_PW1
DIMM1
DIMM2
SYSFAN1
T:Line-In
M:Line- Out
B:MIC-Int
PCI _E1
JBAT1
PCI _E2
JCI1
SATA2
33
DDR3 2, 16GB
DDR3 1600/ 1333/ 1066 MHz
non-ECC, un-buffered
PCIe x16 1 ()
PCIe 2.0 x1 1
Realtek ALC887
PS/2 1
PS/2 1
USB 2.0 4
USB 3.0 2
HDMI 1 ()
DVI-D 1 ()
VGA 1
LAN (RJ45) 1
3
34
24 ATX 1
4 ATX 12V 1
SATA 4
USB 2.0 2 ( USB 2.0 4 )
4 CPU 1
4 1
3 1
1
2
1
CMOS 1
USB 2
BIOS UEFI AMI BIOS
ACPI 5.0, PnP 1.0a, SM BIOS 2.7, DMI 2.0
Micro-ATX
8.9 in. x 6.8 in. (22.6 cm x 17.3 cm)
CPU
http://www.msi.com/service/cpu-support/ .
http://www.msi.com/service/test-report/ .
35
H81M-P33 H81M-E33 H87M-P33
RAID
Small Business
Advantage
H87M-E33 B85M-P33 B85M-E33
RAID
Small Business
Advantage
36
PS/2 LAN
USB 2.0
VGA
HDMI
PS/2 USB 3.0 USB 2.0
PS/2 LAN
USB 2.0
VGA
DVI-D
PS/2 USB 3.0 USB 2.0
LAN LED
LINK/ACT SPEED
LED LED
LED LED
LAN
.
Link/ Activity LED
LAN .
(/ LED)
LAN
.
10 Mbps .
Speed LED
100 Mbps .
( LED)
1 Gbps .
37
CPU
CPU , CPU . CPU
. CPU
. CPU .
CPU
.
http://youtu.be/bf5La099urI
1. .
2. .
CPU .
3. CPU .
CPU .
4.
.
CPU
38
5. PnP CPU . PnP
. CPU PnP .
6. CPU CPU (
) .
7. CPU .
8.
.
9. 4 . 4
.
.
10. .
11. CPU CPU .
CPU .
CPU , CPU
.
CPU / ,
/ .
39
.
http://youtu.be/76yLtJaKlCQ
DDR3 DDR2 , DDR3
. DDR3 DIMM DDR3 .
.
40
JPWR1~2: ATX
ATX . ATX
.
.
.
http://youtu.be/gkDYyR_83I4
1 1.+ +1 B OK
2 1 2
1 0. VS R nd
.+ 2 V
1 .5 W u
3 V
.3
9 .P ro
V
8 .G 5V un
7 .+ ro nd
6 .G 5V u
5 + ro V
4 .G 3.3 3V
1 .G
.
3 .+ 3.
.G ro
2
2 .+
ro un
d
1
u d
n
d
2 3.+ +5 V
4
2 . 5 s n d
.G 5 V
2 1.+ Re ou un d
ro
2
2 0. Gr ro un #
u
V
2 . G o Nd
n
d
1 8. Gr -O un
JPWR2
9
1 7. PS o
3 .+1
.+ 2
1 6. Gr V V
1 V
1 5. -12 .3
2
JPWR1
V
1 4. +3
d
1 3.
1
ATX
.
JCOM1:
16550A 16 FIFO .
.
1 .C
0 T R
.N S
8 DS R
o
6 DT N
P
.
in
4 SI
.
2
.
9 . R r ou T
.R T n
7 G U
I S d
5 . SO C D
.
3 .D
1
41
SATA1~4: SATA
SATA . SATA
. SATA (HDD),
(SSD) (CD/ DVD/ ) .
SATA HDD
.
http://youtu.be/RZsMpqxythc
(HDD), (SSD) (CD /
DVD / ) SATA
. .
HDD, SSD, SATA
.
SATA .
SATA 90 .
.
SATA
.
JCI1:
. ,
.
. , BIOS .
1 .C
.G IN
2
ro T
u RU
n
d
42
CPUFAN,SYSFAN1~2:
+12V .
, CPU
. .
, .
1 .+ o U
.G 1
2 .N
1 + en e
ro 2V se
3
.G 1 s d
2 .S pe
u
.
ro 2V e Co
3 .S
n
d
u
4
n
d
n
tr
o
l
CPU .
. CPU
Command Center
.
,
.
, .
43
JFP1, JFP2:
LED . JFP1 Intel Front Panel
I/O Connectivity Design Guide .
M- . M-
M- .
.
http://youtu.be/DPELIdVNZUI
P
o
w
e
r
S
P
1
w
0
o
it
.N
w
ch
e
o 8.
r
P -
L
in
E
D
6 .-
.+
4 +
2
.
4 S CC ak
.V p 5 e
3 .V pe
C ea
.
9 .+
2 .S
C ke
JFP1
.R
5 r
7 -
JFP2
1
e R
5 .-
se e
.
3 .+
rv se
e
1
d Sw
r
H
t
D
D
it
L
ch
E
D
(+) .
M-
.
JFP1 .
C un +
6 .U C
.U S
4 VC
2
d
.
9 .G SB 0-
.N r o 0
7 U B
o u +
5 .U CC
P nd
.
in
3 .V
1
VCC GND .
44
, Intel Front
3
L in
p 2
e D ta in
n
o N a p 1
h E R d ta pin 0
P _S ne e s & da ta pi
n
d o
a E h m s & da ta
e NS P ra re s a
.H E d F d s & d
9 .S ea R C ad dre ss &
P re s
7 H IC L
. .L C d d s
5 .M IC 3 P a d re
1 .L C a d et
11 .LP C ad es k
Panel I/O Connectivity Design Guide .
3 .M
1 9 .LP C R loc
n 7 .LP C C
io 5 .LP C
ct
TPM .
45
JAUD1:
te 3 .LP
e 1
D
e
n
o n
h
JTPM1: TPM
P io d
d ct n
u d
a
e in et
e ro un n r e
r
.H P D .G ro Pi we Q r ow
0 o 4
1 2.G o Po IR e p
1 .N IC 1 0.N V ial ow by
8 M C nd
.
6 .N ou 1 .5 er P nd
8 S 3V ta
4 Gr .
6 .3. S
.
2 4 .3V
2
JBAT1: CMOS
CMOS RAM . CMOS RAM , OS
. , CMOS RAM
.
1 1
CMOS RAM . ,
. CMOS .
.
JUSB_PW1
( USB
PS/2 1 1
)
( )
JUSB_PW2
1 1
( USB
) ( )
46
PCI_E1~2: PCIe
PCIe PCIe .
PCIe 2.0 x1
.
.
47
BIOS
. ,
.
SETUP .
.
BIOS ,
. BIOS " "
<Enter> .
BIOS , . ,
.
POST (Power On Self Test) .
, <DEL> .
Press DEL key to enter Setup Menu, F11 to enter Boot Menu
(DEL , F11 .)
BIOS ,
RESET . <Ctrl>, <Alt> <Delete>
.
MSI BIOS . "MSI Fast Boot"
"GO2BIOS" GO2BIOS" (
) BIOS .
MSI Fast Boot BIOS
.
48
BIOS .
Virtual OC
Genie
BIOS
BIOS
OC
.
.
.
, OC Genie
.
49
Current CPU/ DRAM/ Ring Frequency
CPU, . ( )
CPU Ratio Mode [Auto]
CPU .
[Auto] BIOS .
[Fixed Mode] CPU .
[Dynamic Mode] CPU CPU .
Adjust CPU Ratio [Auto]
CPU CPU .
.
50
Adjusted DRAM Frequency
DRAM .( )
DRAM Timing Mode [Auto]
.
[Auto] DRAM SPD (Serial Presence
Detect) .
[Link] DRAM .
[UnLink] DRAM .
Advanced DRAM Configuration
[Link] [Unlink] .
.
, CMOS
. (CMOS /
CMOS BIOS .)
Memory Fast Boot [Auto]
.
[Auto] BIOS .
[Enabled] .
,
.
[Disabled] .
DRAM Voltage [Auto]
. "Auto" BIOS
.
Spread Spectrum
EMI (Electromagnetic Interference) .
[Enabled] EMI (Electromagnetic Interference)
.
[Disabled] CPU .
EMI [ ]
. EMI EMI
.
EMI .
EMI .
[ ] .
51
CPU Features
<Enter> .
Hyper-Threading Technology [Enabled]
Hyper-Threading ,
.
. , .
[Enable] Intel Hyper-Threading .
[Disabled] HT .
Active Processor Cores [All]
.
52
CPU AES Instructions [Enabled]
CPU AES (Advanced Encryption Standard-New Instructions)
. CPU .
[Enabled] Intel AES .
[Disabled] Intel AES .
Intel Adaptive Thermal Monitor [Enabled]
CPU .
[Enabled] CPU , CPU
.
[Disabled] .
Intel C-State [Auto]
C-state ACPI .
[Auto] BIOS .
[Enabled] CPU
.
[Disabled] .
C1E Support [Disabled]
C1E
. "Intel C-State" .
[Enabled] CPU
.
[Disabled] .
Package C State limit [Auto]
CPU C-state .
"Intel C-State" .
[Auto] BIOS .
[C0~C7s] .
C7s, C7, C6, C3, C2, C0.
[No limit] C-state .
LakeTiny Feature [Disabled]
iRST SSD Intel Lake Tiny .
CPU "Intel C-State"
.
[Enabled] IO SSD .
[Disabled] .
53
: "Intel Turbo Boost " .
Long Duration Power Limit (W) [Auto]
Turbo Boost CPU TDP
.
Long Duration Maintained (s) [Auto]
" (W)" .
Short Duration Power Limit (W) [Auto]
Turbo Boost CPU TDP
.
CPU Current limit (A) [Auto]
CPU .
, CPU
.
1/2/3/4-Core Ratio Limit [Auto]
CPU
CPU .
.
54
Franais
Merci davoir choisi une carte mre Micro-ATX de la srie H81M-P33/ H81M-E33/
H87M-P33/ H87M-E33/ B85M-P33/ B85M-E33 (MS-7817 v1.X). La srie H81M-P33/
H81M-E33/ H87M-P33/ H87M-E33/ B85M-P33/ B85M-E33 est base sur le chipset
Intel H81/ H87/ B85 pour une efficacit optimale. Conue pour fonctionner avec les
processeurs Intel LGA1150, les cartes mres de la srie H81M-P33/ H81M-E33/
H87M-P33/ H87M-E33/ B85M-P33/ B85M-E33 dlivrent de hautes performances et
offrent une solution adapte tant aux professionnels quaux particuliers.
Schma
Franais
USB3.0 ports
DVI-D port
(for H81M-P33/
H87M-P33/ B85M-P33)
SYSFAN2
HDMI port
(for H81M-E33/
H87M-E33/ B85M-E33)
JPWR1
VGA port
JUSB_PW1
DIMM1
DIMM2
SYSFAN1
T:Line-In
M:Line- Out
B:MIC-Int
PCI _E1
JBAT1
PCI _E2
JCI1
SATA2
55
Spcifications
56
Connecteurs 1x connecteur dalimentation principal 24-pin ATX
internes 1x connecteur dalimentation 4-pin ATX 12V
4x connecteurs SATA
2x connecteurs USB 2.0 (supporte 4 ports USB 2.0
supplmentaires)
1x connecteur de ventilateur de CPU 4-pin
1x connecteur de ventilateur de systme 4-pin
1x connecteur de ventilateur de systme 3-pin
1x connecteur audio avant
2x connecteurs de panneau systme
1x connecteur intrusion chssis
1x cavalier deffacement CMOS
2x cavaliers dalimentation USB
Franais
Multi-langue
57
Spcifications en option
Nom
H81M-P33 H81M-E33 H87M-P33
Spcification
Small Business
Non support Non support Support
Franais
Advantage
Nom
H87M-E33 B85M-P33 B85M-E33
Spcification
Small Business
Support Support Support
Advantage
58
Panneau Arrire
Mic
Clavier PS/2 USB 3.0 USB 2.0
Franais
Souris PS/2 LAN
Mic
Clavier PS/2 USB 3.0 USB 2.0
59
Installation du CPU et son ventilateur
Quand vous installez un CPU, assurez-vous toujours que le CPU soit quip dun
ventilateur, qui est ncessaire pour viter la surchauffe et maintenir la stabilit.
Suivez les instruction suivantes pour installer le CPU et son ventilateur correctement.
Une installation incorrecte peut endommager votre CPU et la carte mre.
Dmonstration de vido
Voir le vido d'installation du CPU et de son ventilateur sur le site
ci-dessous.
http://youtu.be/bf5La099urI
1. Poussez le levier de charge vers le bas pour le dtacher et levez jusqu la
position compltement ouverte.
2. Le plaque se lve automatiquement lorsque le levier est lev la position
compltement ouverte.
Franais
Important
Ne pas toucher les contacts du socket ou lenvers du CPU.
Encoches du CPU
Cls d'alignement
60
5. Quand vous poussez le levier, le couvercle PnP surgit automatiquement de
lemplacement du CPU. Ne pas jeter le couvercle PnP. Toujours replacez le
couvercle PnP si le CPU est enleve de son emplacement.
6. Appliquez une couche de pte thermique (ou dadhsif thermique) sur le dessus
du CPU. Cela aide la dissipation de chaleur et prvient la surchauffe du CPU.
Pte thermique
Franais
8. Placez le ventilateur sur la carte mre avec son cble face au connecteur du
ventilateur. Les lments de fixation doivent correspondre aux trous sur la carte.
9. Appuyez sur le ventilateur jusqu ce que les quatres lments de fixation se
coincent dans les trous de la carte mre. Appuyez sur les quatre lments de
fixation pour fixer le ventilateur. Losque tous les quatre sont bien en position,
vous devez entendre un clic.
10. Inspectez la carte mre pour vous assurer que les bouts des lments de
fixation sont bien verrouills en position.
11. Finalement, reliez le cble du ventilateur de CPU au connecteur sur la carte
mre.
Important
Vrifiez que le ventilateur de CPU est bien attach sur le CPU avant de dmarrer
votre systme.
Quand le CPU nest pas install, toujours protgez les broches de lemplacement
du CPU avec le couvercle recouvrant lemplacement.
Si vous avez achetez un CPU avec son ventilateur spar, veuillez vous
rfrer la documentation dans le paquet du ventilateur pour plus d'information
d'installation.
61
Installation de mmoire
Dmonstration de vido
Voir le vido sur l'installation des mmoires sur le site ci-dessous.
http://youtu.be/76yLtJaKlCQ
1
Franais
Important
Les modules de mmoire DDR3 ne sont pas interchangeables avec les modules
DDR2. Vous devez toujours installer les modules de mmoire DDR3 dans les
emplacements DDR3 DIMM.
Pour garantir la stabilit du systme, assurez-vous dinstaller les modules de
mmoire du mme type et de la mme densit en mode double canal.
62
Connecteurs dalimentation
JPWR1~2: Connecteur d'alimentation ATX
Ce connecteur vous permet de relier une alimentation ATX. Pour cela, alignez
le cble dalimentation avec le connecteur et appuyez fermement le cble dans
le connecteur. Si ceci est bien fait, la pince sur le cble dalimentation doit tre
accroche sur le connecteur dalimentation de la carte mre.
Dmonstration de vido
Voir le vido sur linstallation des connecteurs dalimentation sur le
site ci-dessous.
http://youtu.be/gkDYyR_83I4
1 1.+ +1 B OK
2 1 2
1 0. VS R nd
.+ 2 V
1 .5 W u
3 V
.3
9 .P ro
V
8 .G 5V un
7 .+ ro nd
6 .G 5V u
Franais
5 + ro V
4 .G 3.3 3V
1 .G
.
3 .+ 3.
.G ro
2
2 .+
ro un
d
1
u d
n
d
2 3.+ +5 V
4
2 . 5 s n d
.G 5 V
2 1.+ Re ou un d
ro
2
2 0. Gr ro un #
u
V
2 . G o Nd
n
d
1 8. Gr -O un
JPWR2
9
1 7. PS o
3 .+1
.+ 2
1 6. Gr V V
1 V
1 5. -12 .3
2
JPWR1
V
1 4. +3
d
1 3.
1
Important
Veuillez vous assurer que tous les connecteurs sont connects aux bonnes
alimentations ATX afin garantir une opration stable de la carte mre.
o
6 DT N
P
.
in
4 SI
.
2
.
9 . R r ou T
.R T n
7 G U
I S d
5 . SO C D
.
3 .D
1
63
SATA1~4 : Connecteurs SATA
Ce connecteur est un port dinterface SATA haut dbit. Chaque connecteur peut tre
reli un appareil SATA. Les appareils SATA sont des disques durs (HDD), disque
tat solide (SSD), et lecteurs optiques (CD/ DVD/ Blu-Ray).
Video Demonstration
Voir le vido sur linstallation dun SATA HDD.
http://youtu.be/RZsMpqxythc
Important
Franais
ro T
u RU
n
d
64
CPUFAN,SYSFAN1~2 : Connecteur dalimentation du
ventilateur
Les connecteurs dalimentation du ventilateur supportent les ventilateurs de type
+12V. Si la carte mre est quipe dun moniteur du matriel systme intgr, vous
devrez utiliser un ventilateur spcial pourvu dun capteur de vitesse afin de contrler
le ventilateur de lunit centrale. Noubliez pas de connecter tous les ventilateurs.
Certains ventilateurs de systme se connectent directement lalimentation au lieu
de se connecter la carte mre. Un ventilateur de systme peut tre reli nimporte
quel connecteur de ventilateur systme.
1 .+ o U
.G 1
2 .N
1 + en e
ro 2V se
3
.G 1 s d
2 .S pe
u
.
ro 2V e Co
3 .S
n
d
u
4
Franais
d
n
tr
o
l
Important
Veuillez vous rfrer au site officiel de votre processeur ou consulter votre vendeur
pour trouver ventilateurs de refroidissement CPU recommands.
Ces connecteurs supportent le contrle Smart fan avec le mode liner. Vous
pouvez installer lutilitaire Control Center qui contrlera automatiquement la vitesse
du ventilateur en fonction de la temprature actuelle.
Sil ny pas assez de ports sur la carte mre pour connecter tous les ventilateurs
du systme, des adaptateurs sont disponibles pour connecter directement un
ventilateur lalimentation du botier.
Avant le premier dmarrage, assurez-vous quaucune cble nendommage les
lames de ventilateurs.
65
JFP1, JFP2 : Connecteur panneau systme
Ces connecteurs se connectent aux interrupteurs et LEDs du panneau avant. Le
JFP1 est conforme au guide de conception de la connectivit Entre/sortie du
panneau avant Intel. Lors de linstallation des connecteurs du panneau avant,
veuillez utiliser le M-Connector en option afin de vous simplifier linstallation.
Connectez tous les fils du botier M-Connector et puis connectez le M-Connector
la carte mre.
Dmonstration de vido
Voir le vido pour linstallation des connecteurs du panneau avant.
http://youtu.be/DPELIdVNZUI
P
o
w
e
r
S
P
1
w
0
o
it
.N
w
ch
e
o 8.
r
P -
L
in
E
D
6
.+
4 +
.-
Franais
2
.
4 .S CC ak
.V p 5 e
3 .V pe
C ea
9 .+
2 .S
C ke
JFP1
.R
5 r
JFP2
7 .-
1
e R
5 .-
se e
3 .+
rv e
e
1
d Sw
r
s
H
t
D
D
it
L
ch
E
D
Important
Sur les branchements du botiers, les broches marques par de petits triangles
sont des fils positifs. Veuillez utiliser les diagrammes ci-dessus et lexplication
relative au M-Connector en option pour dterminer la bonne orientation et la
position des connecteurs.
La majorit des connecteurs sur le panneau avant du botier dordinateur sont
connects au JFP1 lorigine.
C un +
6 .U C
.U S
4 VC
2
d
.
9 .G SB 0-
.N r o 0
7 U B
o u +
5 .U CC
P nd
.
in
3 .V
1
Important
Notez que les pins VCC et GND doivent tre branches correctement afin dviter
tout dommage possible.
66
Franais
Ce connecteur permet de relier un module TPM (Trusted Platform Module) en option.
Ce connecteur vous permet de connecter le panneau audio avant. Il est conforme au
guide de conception de la connectivit Entre/sortie du panneau avant Intel.
3
L in
p 2
e D ta in
Veuillez vous rfrer au manuel du module TPM pour plus de dtails.
n
o N a p 1
h E R d ta pin 0
P _S ne e s & da ta pi
n
d o
a E h m s & da ta
e NS P ra re s a
.H E d F d s & d
9 .S ea R C ad dre ss &
JAUD1 : Connecteur audio panneau avant
P re s
7 H IC L
. .L C d d s
5 .M IC 3 P a d re
1 .L C a d et
3 .M 11 .LP C ad es k
67
te 3 .LP
e 1
D
e
n
o n
h io d
P
d ct n
u d
a
e in et
e ro un n r e
r
.H P D .G ro Pi we Q r ow
0 o 4
1 2.G o Po IR e p
1 .N IC 1 0.N V ial ow by
8 M C nd
.
6 .N ou 1 .5 er P nd
8 S 3V ta
4 Gr .
6 .3. S
.
2 4 .3V
2
JBAT1 : Cavalier deffacement CMOS
Il y a un CMOS RAM intgr, qui est aliment par une batterie externe situe sur
la carte mre, destin conserver les donnes de configuration du systme. Avec
le CMOS RAM, le systme peut lancer automatiquement le systme dexploitation
chaque fois quil est allum. Si vous souhaitez effacer la configuration du systme,
rglez le cavalier pour effacer CMOS RAM.
1 1
Important
Vous pouvez effacer le CMOS RAM en connectant ce cavalier quand le systme est
teint. Ensuite, ouvrez le cavalier. Evitez deffacer le CMOS pendant que le systme
est allum; cela endommagerait la carte mre.
Franais
JUSB_PW1
(pour ports USB et PS/2
sur le panneau arrire) 1 1
JUSB_PW2
1 1
(pour ports USB
intgrs) Supporte Pas supporte (Dfaut)
68
PCI_E1~2 : Emplacements dextension PCIe
Lemplacement PCIe supporte l'interface de carte d'extension PCIe.
Important
Lorsque vous ajoutez ou retirez une carte dextension, assurez-vous que le PC nest
Franais
pas reli au secteur. Lisez la documentation pour faire les configurations ncessaires
du matriel ou logiciel ajouts.
69
Configuration BIOS
La configuration par dfaut fournit une performance optimale pour la stabilit du
systme dans les conditions normales. Vous pouvez utiliser les programmes de
configuration lorsque :
Un message derreur apparat sur lcran pendant le dmarrage du systme, et
vous exige dentrer dans la Configuration.
Vous voulez modifier les rglages par dfaut pour des fonctions personalises.
Important
Veuillez charger les configurations par dfaut pour rcuprer la performance
du systme optimale et la stabilit si le systme devient instable aprs la
configuration. Choisissez "Restore Defaults" et appuyez sur <Enter> dans BIOS
pour charger les configurations par dfaut.
Si vous ne matrisez pas la configuration du BIOS, il est recommand de garder
Franais
Press DEL key to enter Setup Menu, F11 to enter Boot Menu
(Appuyez sur la touche DEL pour entrer dans le BIOS, F11 dans Dmarrage)
Si le message disparat avant que vous ne rpondiez et que vous souhaitez encore
entrer dans le BIOS, redmarrez le systme en teignant puis en rallumant en
appuyant sur le bouton RESET (Rinitialiser). Vous pouvez galement redmarrer le
systme en appuyant simultanment sur les touches <Ctrl>, <Alt>, et <Delete>.
MSI fournit deux faons supplmentaires pour entrer dans la configuration BIOS.
Vous pouvez cliquez sur longlet GO2BIOS lcran dutilitaire MSI Fast Boot
ou appuyez sur le bouton GO2BIOS" physique (en option) sur la carte mre pour
permettre au systme daller dans la configuration BIOS directement au prochain
dmarrage.
Important
Veuillez vous assurer davoir install lutilitaire MSI Fast Boot avant dutiliser le
service pour accder la configuration du BIOS.
70
Vue d'ensemble
Entrer BIOS, lcran suivant apparat.
Indicateur temprature Langue Information
du systme
Nom du
modle
Bouton virtuel
OC Genie
Barre priorit
de priphrique
dmarrage
Slection du
menu BIOS
Slection du
menu BIOS
Franais
Ecran de menu
OC Menu
Important
LOverclocking manuel du PC nest recommand que pour les utilisateurs
avancs.
LOverclocking nest pas garanti, et une mauvaise manipulation peut invalider
votre garantie et endommager svrement votre matriel.
Si vous ntes pas familier avec loverclocking, nous recommandons dutiliser OC
Genie pour un overclocking simplifi et plus stable.
71
Current CPU/ DRAM/ Ring Frequency
Ces menus affichent la frquence actuelle du CPU install, de la mmoire et du Ring.
En lecture seule.
CPU Ratio Mode [Auto]
Choisit le mode d'opration CPU Ratio.
[Auto] Ce rglage sera configur automatiquement par le BIOS.
[Fixed Mode] Fixer le ratio CPU.
[Dynamic Mode] CPU ratio sera dynamiquement modifi selon le charge du CPU.
Adjust CPU Ratio [Auto]
Dfinit le ratio CPU qui sert dterminer la vitesse d'horloge CPU. Ce menu peut
tre modifi uniquement si le CPU prend cette fonction en charge.
Adjusted CPU Frequency
Montre la frquence ajuste du CPU. En lecture seule.
EIST [Enabled]
Franais
72
Adjusted DRAM Frequency
Montre la frquence ajuste DRAM. En lecture seule.
DRAM Timing Mode [Auto]
Choisit le mode de latences mmoire.
[Auto] DRAM timings sera dtermin selon le SPD (Serial Presence
Detect) des modules de mmoire installs.
[Link] Ceci vous permet de configurer les latences DRAM manuellement
pour tous les canaux de mmoire.
[UnLink] Ceci vous permet de configurer les latences DRAM manuellement
pour chaque canal de mmoire.
Advanced DRAM Configuration
Appuyez sur <Enter> pour entrer dans le sous-menu. Ce sous-menu est activ par
le rglage en [Link] ou [Unlink] dans DRAM Timing Mode. L'utilisateur peut rgler
la synchronisation de mmoire pour chaque canal de mmoire. Le systme peut tre
instable ou ne peut plus redmarrer aprs le changement de la synchronisation de la
mmoire. Dans ce cas-l, veuillez effacer les donnes CMOS et remettre le rglage
Franais
par dfaut. (Se rfrer l'interrupteur/ au bouton Clear CMOS pour effacer les
donnes CMOS, et entrer dans le BIOS pour charger les rglages par dfaut.)
Memory Fast Boot [Auto]
Active ou dsactive l'initialisation et le test de la mmoire chaque dmarrage.
[Auto] Ce rglage est automatiquement configur par le BIOS.
[Enabled] La mmoire imitera compltement l'archive de la premire
initiation et de la premire formation. La mmoire n'est ensuite
plus initialise ni teste au moment du dmarrage, de faon
acclrer le dmarrage du systme.
[Disabled] La mmoire est initialise et teste chaque dmarrage.
DRAM Voltage [Auto]
Dfinit la tension de mmoire. En "Auto", le BIOS dfinit automatiquement la tension
de mmoire. Vous pouvez galement la rgler manuellement.
Spread Spectrum
Cette fonction rduit les interfrences lectromagntiques EMI (Electromagnetic
Interference) en rglant les impulsions du gnrateur d'horloge.
[Enabled] Active la fonction spread spectrum pour rduire le problme EMI
(Electromagnetic Interference).
[Disabled] Amliore la capabilit doverclocking de le base clock CPU.
Important
Si vous navez pas de problme dEMI, laissez loption sur [Disable], ceci vous
permet davoir une stabilit du systme et des performances optmales. Dans le
cas contraire, choisissez Spread Spectrum pour rduire les EMI.
Plus la valeur Spread Spectrum est importante, plus les EMI sont rduites, et le
systme devient moins stable. Pour la valeur Spread Spectrum la plus convenable,
veuillez consulter le reglement EMI local.
73
Noubliez pas de dsactiver la fonction Spread Spectrum si vous tes en train
doverclocker parce que mme un battement lger peut causer un accroissement
temporaire de la vitesse de lhorloge qui verrouillera votre processeur overclock.
CPU Features
Appuyez sur <Enter> pour entrer dans le sous-menu.
Hyper-Threading Technology [Enabled]
Le processeur utilise la technologie Hyper-Threading pour augmenter le taux
de transaction et rduire le temps de rponse utilisateur. La technologie traite
les multi curs dans le processeur comme des multi processeurs logiques qui
excutent les instructions simultanment. Dans ce cas-l, la performance du
systme est considrablement augmente.
[Enable] Active la technologie Intel Hyper-Threading.
[Disabled] Dsactive ce menu si le systme ne prend pas la fontion HT
en charge.
Active Processor Cores [All]
Franais
74
[Disabled] Dsactive le prefetcher matriel.
Adjacent Cache Line Prefetch [Enabled]
Active ou dsactive le prefetcher matriel CPU (MLC Spatial prefetcher).
[Enabled] Active le prefetcher de la ligne de cache adjacente pour
rduire le temps de latence et ajuster les performances dans
l'application spcifique.
[Disabled] Active seulement la ligne de cache exige.
CPU AES Instructions [Enabled]
Active ou dsactive le support CPU AES (Advanced Encryption Standard-New
Instructions). Ce menu apparat si le CPU prend cette fonction en charge.
[Enabled] Active le support Intel AES.
[Disabled] Dsactive le support Intel AES.
Intel Adaptive Thermal Monitor [Enabled]
Active ou dsactive la fonction de rgulation adaptative de la temprature du
moniteur Intel pour protger le CPU contre la surchauffe.
Franais
[Enabled] Ralentit l'horloge du cur CPU lorsque sa temprature
dpasse la temprature du rgulateur adaptatif.
[Disabled] Dsactive cette fonction.
Intel C-State [Auto]
C-state est une technologie de gestion d'alimentation processeur, dfinie par
ACPI.
[Auto] Ce rglage est configur automatiquement par le BIOS.
[Enabled] Dtecte ltat de repos du systme et rduit en consquence
la consommation dnergie du CPU.
[Disabled] Dsactive cette fonction.
C1E Support [Disabled]
Active ou dsactive la fonction C1E pour lconomie dnergie en tat darrt. Ce
menu apparat lorsque "Intel C-State" est activ.
[Enabled] Active la fonction C1E pour rduire la frquence et la tension
CPU visant conomiser l'nergie en tat darrt.
[Disabled] Dsactive cette fonction.
Package C State limit [Auto]
Ce menu permet de choisir un mode C-state de CPU pour conomiser lnergie
lorsque le systme est au repos. Ce menu apparat lorsque "Intel C-State" est
activ.
[Auto] Ce rglage est configur automatiquement par le BIOS.
[C0~C7s] Le niveau d'conomie d'nergie du plus lev au plus bas est
C7s, C7, C6, C3, C2, puis C0.
[No limit] Aucune limite C-state pour le CPU.
LakeTiny Feature [Disabled]
Active ou dsactive la fonction Intel Lake Tiny avec iRST pour SSD. Cet article
apparat lorsque le CPU install prend cette fonction en charge et que Intel
C-State est activ.
75
[Enabled] Amliore les performances ajustes de charge ES dynamique
pour acclrer la vitesse SSD.
[Disabled] Dsactive cette fonction.
76
Deutsch
Danke, dass Sie das H81M-P33/ H81M-E33/ H87M-P33/ H87M-E33/ B85M-P33/
B85M-E33 (MS-7817 v1.X) Micro-ATX Motherboard gewhlt haben. Diese H81M-
P33/ H81M-E33/ H87M-P33/ H87M-E33/ B85M-P33/ B85M-E33 Motherboard
basiert auf dem Intel H81/ H87/ B85 cChipsatz und ermglicht so ein optimales
und effizientes System. Entworfen, um den hochentwickelten Intel LGA1150
Prozessor zu untersttzen, stellt die H81M-P33/ H81M-E33/ H87M-P33/ H87M-
E33/ B85M-P33/ B85M-E33 die ideale Lsung zum Aufbau eines professionellen
Hochleistungsdesktopsystems dar.
Layout
Top : mouse CPUFAN
Bottom: keyboard
USB3.0 ports
Deutsch
DVI-D port
(for H81M-P33/
H87M-P33/ B85M-P33)
SYSFAN2
HDMI port
(for H81M-E33/
H87M-E33/ B85M-E33) JPWR1
VGA port
JUSB_PW1
DIMM1
DIMM2
SYSFAN1
T:Line-In
M:Line- Out
B:MIC-Int
PCI _E1
JBAT1
PCI _E2
JCI1
SATA2
77
Spezifikationen
78
Hintere Ein-/ PS/2 Tastaturanschluss x1
und Ausgnge PS/2 Mausanschluss x1
USB 2.0 Anschlsse x4
USB 3.0 Anschlsse x2
HDMI Anschluss x1 (optional)
DVI-D Anschluss x1 (optional)
VGA Anschluss x1
LAN (RJ45) Anschluss x1
Audiobuchsen x3
Deutsch
Steckbrcke zur CMOS-Lschung x1
Steckbrcken zur USB-Stromversorgung x2
79
Optionale Spezifikationen
Name
H81M-P33 H81M-E33 H87M-P33
Spezifikation
Name
H87M-E33 B85M-P33 B85M-E33
Spezifikation
Small Business
Untersttzung Untersttzung Untersttzung
Advantage
80
Rcktafel-bersicht
Mic
PS/2 Tastatur USB 3.0 USB 2.0
Deutsch
VGA
DVI-D Line-Out
Mic
PS/2 Tastatur USB 3.0 USB 2.0
Aus 10 Mbps-Verbindung
Speed LED
(Geschwindigkeit Grn 100 Mbps-Verbindung
LED)
Orange 1 Gbps-Verbindung
81
CPU & Khlkrper Einbau
Wenn Sie die CPU einbauen, denken sie bitte daran einen CPU-Khler zu
installieren. Ein CPU-Khlkrper ist notwendig, um eine berhitzung zu vermeiden
und die Systemstabilitt beizubehalten. Befolgen Sie die nachstehenden Schritte, um
die richtige CPU und CPU-Khlkrper Installation zu gewhrleisten. Ein fehlerhafter
Einbau fhrt zu Schden an der CPU und dem Motherboard.
Video-Demonstration
Anhand dieses Video an untenstehende Adresse lernen Sie, wie Sie
CPU & Khlkrper installieren.
http://youtu.be/bf5La099urI
1. Drcken Sie den Verschlusshebel nach unten zum ffnen des Hebels und
ffnen Sie anschlieend die Abdeckplatte.
2. Die Abdeckplatte sollte nach vollstndigem zurckklappen des Verschlusshebels
mit nach hinten klappen.
Deutsch
Wichtig
Berhren Sie die Sockelkontakte oder die Unterseite der CPU nicht.
3. Positionieren Sie die Kerben mit die Justiermarkierungen des Sockels. Setzen
Sie die CPU nach unten, ohne Kippen oder Schieben der CPU im Sockel.
Begutachten Sie, ob die CPU richtig im Sockel sitzt.
4. Schlieen Sie und schieben Sie die Abdeckplatte unter dem Rckhalteknopf.
Verschlieen Sie den Verschlusshebel.
CPU Kerben
Justiermarkierungen
82
5. Wenn Sie den Verschlusshebel herunterdrcken, wird die PnP-Abdeckung aus
dem CPU-Sockel automatisch getrennt. Bitte bewahren Sie die PnP-Abdeckung.
Setzen Sie bitte immer die PnP-Abdeckung ein, wenn die CPU aus dem Sockel
entfernt wird.
6. Verteilen Sie die dann eine geeignete Wrmeleitpaste oder ein Wrmeleitpad
auf der Oberseite der eingesetzten CPU. Dies verbessert die Wrmeableitung
mageblich und verhindert damit die berhitzung des Prozessors.
Wrmeleitpaste
Deutsch
Arretierungsstifte mit leichtem Druck nach unten bis sie einrasten. Das Einrasten
sollte mit einem klick hrbar sein.
10. berprfen Sie das Motherboard um sicherzustellen, dass das der Khler
korrekt installiert ist.
11. Schlielich verbinden Sie das Stromkabel des CPU Lfters mit dem Anschluss
auf dem Motherboard.
Wichtig
Stellen Sie sicher, dass Ihr Khlkrper eine feste Verbindung mit der CPU
hergestellt hat, bevor Sie Ihr System starten.
Wenn keine CPU installiert ist, schtzen Sie immer den CPU-Sockel durch die
Plastikabdeckung.
Wenn Sie eigene CPU und den Khlkrper/ Khler gekauft haben, beziehen
Sie sich bitte auf die Unterlagen des Khlers fr mehr Details ber die
Khlerinstallation.
83
Speicher
Video-Demonstration
Anhand dieses Video an untenstehende Adresse lernen Sie, wie Sie
die Speichermodule installieren.
http://youtu.be/76yLtJaKlCQ
2
Deutsch
Wtichtig
DDR3 und DDR2 knnen nicht untereinander getauscht werden und der Standard
DDR3 ist nicht abwrtskompatibel. Installieren Sie DDR3 Speichermodule stets in
DDR3 DIMM Slots.
Verwenden Sie die Speichermodule des gleichen Typs und identischer
Speicherdichte im Zweikanalbetrieb, um die Systemstabilitt zu gewhrleisten.
84
Interne Anschlsse
JPWR1~2: ATX Stromanschlsse
Mit diesem Anschluss verbinden Sie den ATX Stromanschlusse. Achten Sie bei dem
Verbinden des ATX Stromanschlusses darauf, dass der Anschluss des Netzteils
richtig auf den Anschluss an der Hauptplatine ausgerichtet ist. Drcken Sie dann
den Anschluss des Netzteils fest nach unten, um eine richtige Verbindung zu
gewhrleisten.
Video-Demonstration
Anhand dieses Video an untenstehende Adresse lernen Sie, wie Sie
die Stromversorgungsstecker installieren.
http://youtu.be/gkDYyR_83I4
1 1.+ +1 B OK
2 1 2
1 0. VS R nd
.+ 2 V
1 .5 W u
3 V
.3
9 .P ro
V
8 .G 5V un
7 .+ ro nd
6 .G 5V u
5 + ro V
4 .G 3.3 3V
1 .G
.
3 .+ 3.
.G ro
2
2 .+
ro un
d
1
u d
n
d
2 3.+ +5 V
4
2 . 5 s n d
.G 5 V
2 1.+ Re ou un d
ro
2
2 0. Gr ro un #
u
V
2 . G o Nd
n
d
1 8. Gr -O un
JPWR2
9
1 7. PS o
3 .+1
.+ 2
Deutsch
1 6. Gr V V
1 V
1 5. -12 .3
2
JPWR1
V
1 4. +3
d
1 3.
1
Wichtig
Stellen Sie sicher, dass diese Anschlsse mit den richtigen Anschlssen
des Netzteils verbunden werden, um einen stabilen Betrieb der Hauptplatine
sicherzustellen.
o
6 DT N
P
.
in
4 SI
.
2
.
9 . R r ou T
.R T n
7 G U
I S d
5 . SO C D
.
3 .D
1
85
SATA1~4: SATA Anschlsse
Dieser Anschluss basiert auf der Hochgeschwindigkeitsschnittstelle Serial ATA
(SATA). Pro Anschluss kann ein Serial ATA Gert angeschlossen werden. Zu Serial
ATA Gerten gehren Festplatten (HDD), SSD Festplatten (SSD) und optische
Laufwerke (CD-/DVD-/Blu-Ray-Laufwerke).
Video-Demonstration
Anhand dieses Video an untenstehende Adresse lernen Sie, wie Sie
eine SATA-Featplatte installieren.
http://youtu.be/RZsMpqxythc
Wichtig
Viele Serial ATA Gerte bentigen eine zustzliche Stromversorgung ber das
PC-Netzteil. Dazu gehren Festplatten (SSD und HDD), und optische Laufwerke
(CD-/DVD-/ Blu-Ray). Weitere Informationen bietet das entsprechende Handbuch
Deutsch
des Laufwerks.
Meist mssen Serial-ATA Gerte im Gehuse verschraubt werden. Informationen
dazu finden Sie im Gehuse- oder Gertehandbuch.
Knicken Sie das Serial ATA Kabel nicht in einem 90 Winkel. Datenverlust knnte
die Folge sein.
SATA-Kabel haben identische Stecker an beiden Enden. Es wird empfohlen den
flachen Stecker auf dem Motherboard einstecken.
JCI1: Gehusekontaktanschluss
Dieser Anschluss wird mit einem Kontaktschalter verbunden. Wenn das PC-Gehuse
geffnet wird, aktiviert dies den Gehuse-Kontaktschalter und eine Warnmeldung
wird auf dem Bildschirm angezeigt. Um die Warnmeldung zu lschen, muss das
BIOS aufgerufen und die Aufzeichnung gelscht werden.
1 .C
.G IN
2
ro T
u RU
n
d
86
CPUFAN,SYSFAN1~2: Stromanschlsse fr Lfter
Die Anschlsse untersttzen aktive Systemlfter mit +12V. Ist Ihr Motherboard mit
einem Chipsatz zur berwachung der Systemhardware versehen, dann brauchen Sie
einen speziellen Lfter mit Geschwindigkeitsregelung, um die Vorteile der Steuerung
des CPU Lfters zu nutzen. Vergessen Sie nicht, alle Systemlftern anzuschlieen.
Einige Systemlfter knnen nicht direkt an dem Motherboard angeschlossen werden
und mssen stattdessen mit dem Netzteil direkt verbunden werden. Kompatible
Systemlfter knnen an jeder der onboard-Systemlfteranschlsse angeschlossen
werden.
1 .+ o U
.G 1
2 .N
1 + en e
ro 2V se
3
.G 1 s d
2 .S pe
u
.
ro 2V e Co
3 .S
n
d
u
4
n
d
n
tr
o
l
Deutsch
Wichtig
Informieren Sie sich vor dem Khlerkauf ber die empfohlenen CPU-Khler des
Prozessorherstellers auf dessen website.
Die Anschlsse untersttzen die Smart Fan Lftersteuerung. Das Utility Command
Center kann installiert werden, um die Lftergeschwindigkeit in Abhngigkeit von
der der Prozessor- und System-Temperatur zu steuern.
Fr den Fall, dass nicht gengend Lfteranschlsse auf dem Motherboard zur
Verfgung stehen, knnen weitere Lfter mittels Adapter direkt am Netzteil
angeschlossen werden.
Stellen Sie vor dem ersten Systemstart sicher, dass sich keine Kabel in den
Lftern verfangen knnen.
87
JFP1, JFP2: Frontpanel Anschlsse
Diese Anschlsse sind fr das Frontpanel angelegt. Sie dienen zum Anschluss der
Schalter und LEDs des Frontpanels. JFP1 erfllt die Anforderungen des Intel
Front Panel I/O Connectivity Design Guide. Bei der Installation des Frontpanel-
Anschlsse, nutzen Sie bitte die beiliegenden mConnectors um die Installation
zu vereinfachen. Schlieen Sie alle Kabel aus dem PC-Gehuse zunchst an die
mConnectors an und stecken Sie die mConnectors auf das Motherboard.
Video-Demonstration
Anhand dieses Videos an untenstehender Adresse lernen Sie, wie
Sie die Frontpanel-Anschlsse installieren.
http://youtu.be/DPELIdVNZUI
P
o
w
e
r
S
P
1
w
0
o
it
.N
w
ch
e
o 8.
r
P -
L
in
E
D
6 .-
.+
4 +
2
.
4 S CC ak
.V p 5 e
3 .V pe
C ea
.
9 .+
2 .S
C ke
JFP1
.R
5 r
7 -
JFP2
1
e R
5 .-
se e
.
3 .+
rv se
e
1
d Sw
r
H
Deutsch
t
D
D
it
L
ch
E
D
Wichtig
An den Anschlssen aus dem Gehuse sind die positiven Kabel an den Pins, die
mit kleinen Dreiecken markiert sind erkennbar. Bitte verwenden Sie das Diagramm
oben und die Bezeichnungen auf den MConnectors um die korrekte Positionierung
und Platzierung festzustellen.
Die meisten Anschlsse in der Frontplatte des PC-Gehuse soll vor allem in JFP1
gesteckt werden.
C un +
6 .U C
.U S
4 VC
2
d
.
9 .G SB 0-
.N r o 0
7 U B
o u +
5 .U CC
P nd
.
in
3 .V
1
Wichtig
Bitte beachten Sie, dass Sie die mit VCC (Stromfhrende Leitung) und GND
(Erdleitung) bezeichneten Pins korrekt verbinden mssen, ansonsten kann es zu
Schden kommen.
88
JAUD1: Audioanschluss des Frontpanels
Dieser Anschluss ermglicht den Anschluss von Audio Ein- und Ausgngen eines
Frontpanels. Der Anschluss entspricht den Richtlinien des Intel Front Panel I/O
Connectivity Design Guide.
1 .N IC
0 o
.H P D
8 M C nd
e in et
6 .N ou
a
.
d
4 Gr
P
h
2
o
.
n
e
e
D
ct
e
io
te
n
ct
io
n
9 .S ea R
.H E d
7 H IC L
e NS P
5 .M IC
a E h
.
d
3 .M
P _S ne
h E R
1
o N
n
e D
L
o
JTPM1: TPM Anschluss
Dieser Anschluss wird fr das TPM Modul (Trusted Platform Module) ver-wendet.
Weitere Informationen ber den Einsatz des optionalen TPM Modules entnehmen
Deutsch
Sie bitte dem TPM Plattform Handbuch.
1 2.G o Po IR e p
4
1 0.N V ial ow by
.G ro Pi we Q r ow
1 .5 er P nd
ro un n r
u d
8 S 3V ta
n
d
6 .3. S
.
4 .3V
2
1 .L C a d et
e
3 P a d re
r
11 .LP C ad es k
.L C d d s
P
9 .LP C R loc
C ad dre ss &
7 .LP C C
F d s & d
ra re s
5 .LP C
m s & da ta
3 .LP
e s & da ta pi
1
re s
d ta pin 0
a p 1
ta in
p 2
in
a
3
n
89
JBAT1: Steckbrcke zur CMOS-Lschung
Der Onboard CMOS Speicher (RAM) wird durch eine externe Spannungsversorgung
durch eine Batterie auf dem Motherboard versorgt, um die Daten der
Systemkonfiguration zu speichern. Er ermglicht es dem Betriebssystem, mit jedem
Einschalten automatisch hochzufahren. Wenn Sie die Systemkonfiguration lschen
wollen, mssen Sie die Steckbrcke fr kurze Zeit umsetzen. Halten Sie sich an die
Anweisungen in der Grafik, um die Daten zu lschen.
1 1
Wichtig
Wenn das System ausgeschaltet ist, knnen Sie die Steckbrcke stecken, um die
Daten im CMOS zu lschen. Danach entfernen Sie die Steckbrcke. Versuchen Sie
niemals die Daten im CMOS zu lschen, wenn das System eingeschaltet ist. Die
Hauptplatine kann dadurch beschdigt werden.
Stromversorgung
Diese Steckbrcken werden gesetzt um festzulegen welche USB- und PS/2 Gerte
das Wake Up Event Setup Feld des BIOS untersttzen.
JUSB_PW1
(fr die rckwrtigen
USB- und PS/2- 1 1
Anschlsse) Untersttzt Nicht untersttzt (Standard)
JUSB_PW2
1 1
(fr die eingebauten
USB Anschlsse) Untersttzt Nicht untersttzt (Standard)
90
PCI_E1~2: PCIe Erweiterungssteckpltze
Der PCIe Steckplatz untersttzt PCIe-Erweiterungskarten.
Wichtig
Achten Sie darauf, dass Sie den Strom abschalten und das Netzkabel aus der
Steckdose herausziehen, bevor Sie eine Erweiterungskarte installieren oder
entfernen. Lesen Sie bitte auch die Dokumentation der Erweiterungskarte, um
notwendige zustzliche Hardware oder Software-nderungen zu berprfen.
Deutsch
91
BIOS Setup
Die Standardeinstellungen bieten die optimale Leistung fr Systemstabilitt unter
normalen Bedingungen. Notwendigkeit zum Aufruf des BIOS besteht, wenn:
Whrend des Bootvorgangs des Systems eine Fehlermeldung erscheint und Sie
zum Aufruf des SETUP aufgefordert werden.
Sie die Werkseinstellungen zugunsten individueller Einstellungen ndern wollen.
Wichtig
Wenn das System nach dem ndern der BIOS-Einstellungen instabil wird, laden
Sie bitte die Standardeinstellungen, um die optimale Systemleistung und Stabilitt
wiederherzustellen. Whlen Sie die Restore Defaults und drcken Sie auf
<Eingabe> in BIOS, um die Standardeinstellungen zu laden.
Falls Sie nicht mit den BIOS-Einstellungen vertraut sind, empfehlen wir, dass Sie
die Standardeinstellungen beizubehalten, um die Systemschden oder den Fehler
im Boot durch unsachgeme BIOS-Konfiguration zu vermeiden.
Press DEL key to enter Setup Menu, F11 to enter Boot Menu
(ENTF drcken, um das Einstellungsprogramm zu ffnen; F11 drcken um das
Bootmen zu ffnen)
Wenn die Nachricht verschwindet, bevor Sie reagieren und Sie mchten immer noch
ins BIOS, starten Sie das System neu, indem Sie es erst AUS- und danach wieder
ANSCHALTEN, oder die RESET-Taste am Gehuse bettigen. Sie knnen das
System auerdem neu starten, indem Sie gleichzeitig die Tasten <Strg>,<Alt> und
<Entf> drcken (bei manchen Tastaturen <Ctrl>,<Alt> und <Del>).
MSI bietet zustzlich zwei Methoden, um das BIOS-Setup zu gelangen. Klicken
Sie auf das Auswahlfeld GO2BIOS des Bildschirms "MSI Fast Boot" oder drcken
Sie die Taste GO2BIOS" (optional) auf dem Motherboard, um beim nchsten
Systemstart automatisch ins BIOS Menu zu wechseln.
Wichtig
Beim Einsatz des MSI Fastboot-Dienstprogramms zum automatischen Aufrufen des
BIOS mssen Sie das Programm zunchst installieren.
92
berbilck
Nach dem Aufrufen des BIOS, sehen Sie die folgende Anzeige.
Temperatur-berwachung Sprache System-
Information
Modell
Name
Virtual OC
Genie Taste
Bootgerte-
Prioritts-
BIOS-Men- leiste
Auswahl
BIOS-Men-
Auswahl
Menanzeige
OC-Men
Deutsch
Wichtig
Die bertaktung ist nur fr fortgeschrittene Benutzer zu empfehlen.
Die erfolgreiche bertaktung ist nicht gewhrleistet. Die Anwendung von
bertaktungsmanahmen kann zu Verlust der Garantie oder zur Beschdigung
der Hardware fhren.
Falls Sie sich mit der bertaktung nicht auskennen, empfehlen wir fr einfaches
bertakten die OC-Genie Funktion.
93
Current CPU/ DRAM/ Ring Frequency
Zeigt die derzeitigen Frequenz der installierten CPU, Speicher und Ring. Dies ist nur
eine Anzeige keine nderung mglich.
CPU Ratio Mode [Auto]
Whlen Sie den Betriebsmodus des CPU-Multiplikators.
[Auto] Diese Einstellungen werden vom BIOS automatisch konfiguriert.
[Fixed Mode] Legt den CPU-Multiplikator fest.
[Dynamic Mode] Der CPU-Multiplikator wird dynamisch je nach CPU-Belastung
verndert.
Adjust CPU Ratio [Auto]
Legen Sie den CPU-Multiplikator fest, um die CPU-Taktfrequenzen zu bestimmen.
Diese Option kann nur gendert werden, wenn der Prozessor diese Funktion
untersttzt.
Adjusted CPU Frequency
Es zeigt die eingestellte Frequenz der CPU an. Es handelt sich um eine Anzeige
nderungen sind nicht mglich.
EIST [Enabled]
Aktivieren oder deaktivieren Sie die Enhanced Intel SpeedStep Technologie.
Intel Turbo Boost [Enabled]
Deutsch
Aktivieren oder deaktivieren Sie Intel Turbo Boost. Diese Option wird angezeigt,
wenn die installierte CPU diese Einstellungen untersttzt.
[Enabled] Aktivieren Sie diese Funktion, um die CPU-Leistung automatisch
zu erhhen, wenn das System mehr Leistung bentigt.
[Disabled] Deaktivieren Sie diese Funktion.
Enhanced Turbo [Auto]
Aktivieren oder deaktivieren Sie die Enhanced Turbo Funktion fr alle CPU-Kerne die
CPU-Leistung zu erhhen.
[Auto] Diese Einstellungen werden vom BIOS automatisch konfiguriert.
[Enabled] Alle CPU-Kerne werden mit maximalem Turbo konfiguriert.
[Disabled] Deaktivieren Sie diese Funktion.
Adjust Ring Ratio [Auto]
Setzen Sie den Ring Ratio. Der erlaubte Wertebereich ist abhngig von der
installierten CPU.
Adjusted Ring Frequency
Zeigt die angepasste Ring Frequenz. Nur Anzeige keine nderung mglich.
Adjust GT Ratio [Auto]
Setzen Sie den Multiplikator der integrierten Grafik. Der erlaubte Wertebereich ist
abhngig von der installierten CPU.
Adjusted GT Frequency
Zeigt die angepasste Frequenz der integrierten Grafik. Nur Anzeige keine
nderung mglich.
94
DRAM Frequency [Auto]
Setzen Sie die DRAM Frequenz. Bitte beachten Sie, dass ein zuverlssiges
bertaktungsverhalten nicht garantiert werden kann.
Adjusted DRAM Frequency
Zeigt die Speicherfrequenz an. Nur Anzeige keine nderung mglich.
DRAM Timing Mode [Auto]
Whlt den Speicher-Timing-Modus aus.
[Auto] Das DRAM-Timing wird basierend auf SPD (Serial Presence
Detect) der installierten Speichermodule bestimmt.
[Link] Ermglicht die manuelle Konfigurieren des DRAM-Timing fr alle
Speicherkanle.
[UnLink] Ermglicht die manuelle Konfigurieren des DRAM-Timing fr die
einzelnen Speicherkanle.
Advanced DRAM Configuration
Drcken Sie die Eingabetaste <Enter>, um das Untermen aufzurufen. Dieses
Untermen wird nach der Einstellung [Link] oder [Unlink] in DRAM Timing Mode
aktiviert werden. Der Anwender kann die Speicher-Timing fr jeden Kanal des
Speichers einstellen. Das System knnte nach dem ndern Speicher-Timings
instabil werden oder nicht mehr booten. Wenn Instabilitt auftritt, lschen Sie bitte die
CMOS-Daten und stellen Sie die Standardeinstellungen wieder her. (Lesen Sie bitte
Deutsch
den Abschnitt "Clear CMOS Jumper/ Taste", um die CMOS-Daten zu lschen, und
die Standardeinstellungen auf das BIOS zu laden.)
Memory Fast Boot [Auto]
Aktivieren oder deaktivieren Sie die die Initiierung und Prfung des Speichers fr
jeden.
[Auto] Diese Einstellungen werden vom BIOS automatisch konfiguriert.
[Enabled] Der Vorgang der Initierung und Prfung des Hauptspeichers wird
aus dem Archiv der ersten Initiierung imitiert um den Systemstart
zu beschleunigen.
[Disabled] Der Speicher wird bei jedem Boot-Vorgang vollstndig neu initiiert
und geprft.
DRAM Voltage [Auto]
Setzen die Speicherspannung. Wenn die Einstellung auf [Auto] gesetzt ist, wird das
BIOS die Speicher-Spannung automatisch einstellen. Sie knnen die Einstellungen
auch manuell vornehmen.
Spread Spectrum
Die Spread Spectrum Funktion reduziert die erzeugte elektromagnetischen
Strahlung, mittels Modulation eines Taktgeneratorimpulses.
[Enabled] Aktivieren Sie die Spread-Spectrum-Funktion, um die
elektromagnetische Wechselwirkung zu reduzieren.
[Disabled] Verbesseren Sie die bertaktungs-Fhigkeiten des CPU-
Grundtakts.
95
Wichtig
Sollten Sie keine Probleme mit Interferenzen haben, belassen Sie es bei der
Einstellung [Disabled] (ausgeschaltet) , um bestmgliche Systemstabilitt und
-leistung zu gewhrleisten. Stellt fr sie EMI ein Problem dar, whlen Sie die
gewnschte Bandbreite zur Reduktion der EMI.
Je grer der Spread Spectrum Wert ist, desto grer nimmt der EMI ab, und
das System wird weniger stabil. Bitte infiormieren Sie sich ber die lokale EMI
Regelung und den passenden Spread Spectrum Wert.
Denken Sie daran Spread Spectrum zu deaktivieren, wenn Sie bertakten, da
sogar eine leichte Schwankung eine vorbergehende Taktsteigerung erzeugen
kann, die gerade ausreichen mag, um Ihren bertakteten Prozessor in seiner
Funktion zu stren.
CPU Features
Drcken Sie die Eingabetaste <Enter>, um das Untermen aufzurufen.
Hyper-Threading Technology [Enabled]
Der Prozessor verwendet die Technologie des Hyper-Threadings, um die
Transaktionsraten zu erhhen und die Antwortzeiten des Benutzers zu
verringern. Die Intel Hyper-Threading Technologie behandelt die Prozessorkerne
innerhalb des Prozessors als Multi logische Prozessoren, die Anweisungen
Deutsch
96
Intel Virtualization Tech [Enabled]
Aktiviert oder deaktiviert die Intel Virtualization Technologie.
[Enabled] Aktiviert die Intel Virtualization-Technologie, die es mehreren
Betriebssystemen ermglicht in voneinander unabhngigen
Partitionen zu arbeiten. Das System kann als mehrere
Systeme virtuell einsetzen.
[Disabled] Deaktiviert diese Funktion.
Hardware Prefetcher [Enabled]
Aktivieren oder deaktivieren Sie das Hardware Prefetcher (MLC Streamer
prefetcher).
[Enabled] Der CPU Hardware Prefetcher kann frhzeitig Daten und
Anweisungen aus dem Speicher in den L2-Cache aden um
die Cache-Latency Zeiten zu reduzieren.
[Disabled] Deaktiviert den Hardware Prefetcher.
Adjacent Cache Line Prefetch [Enabled]
Aktiviert oder deaktiviert den CPU Hardware Prefetcher (MLC Spatial prefetcher).
[Enabled] Ermglicht Adjacent Cache Line Prefetch zur Verringerung
der Cache Latenzzeit und zur Leistungssteigerung von
Applikationen.
[Disabled] Aktiviert nur die angeforderten Cache-Zeilen.
Deutsch
CPU AES Instructions [Enabled]
Enables or disables the CPU AES (Advanced Encryption Standard-New
Instructions) support. This item appears when a CPU supports this function.
[Enabled] Aktiviert die Intel AES Untersttzung.
[Disabled] Deaktiviert die Intel AES Untersttzung.
Intel Adaptive Thermal Monitor [Enabled]
Aktiviert oder deaktiviert die CPU AES (Advanced Encryption Standard-New
Instructions) Untersttzung. Diese Option wird angezeigt, wenn die CPU diese
Funktion untersttzt.
[Enabled] Drosselt die CPU Kerntakt, wenn die CPU-Temperatur ber
die adaptive Temperatur steigt.
[Disabled] Deaktiviert diese Funktion.
Intel C-State [Auto]
C-State ist eine durch ACPI definierte Prozessor-Power-Management-
Technologie.
[Auto] Diese Einstellungen werden vom BIOS automatisch
konfiguriert.
[Enabled] Ermglicht die Erkennung, wann sich das System im Leerlauf
befindet und senkt den CPU-Stromverbrauch entsprechend.
[Disabled] Deaktiviert diese Funktion.
97
C1E Support [Disabled]
Aktiviert oder deaktiviert die C1E-Funktion fr Stromersparnis im Leerlauf. Diese
Option wird angezeigt, wenn Intel C-State aktiviert ist.
[Enabled] Ermglicht die C1E Funktion, um die CPU-Frequenz und
Spannung zur Stromersparnis im Leerlauf zu reduzieren.
[Disabled] Deaktiviert diese Funktion.
Package C State limit [Auto]
Hier knnen Sie einen CPU C-State-Modus fr Stromsparen auswhlen, wenn
das System im Leerlauf ist. Diese Option wird angezeigt, wenn "Intel C-State"
aktiviert ist.
[Auto] Diese Einstellungen werden vom BIOS automatisch
konfiguriert.
[C0~C7s] Die Energiesparstufe ist von hoch zu niedrig ist C7, C7, C6,
C3, C2, dann C0.
[No limit] Es gibt keinen C-state Grenzwert fr die CPU.
LakeTiny Feature [Disabled]
Aktivieren oder deaktivieren Sie die Intel See Tiny-Technologie mit IRST fr
SSD. Diese Option wird angezeigt, wenn eine installierte CPU diese Funktion
untersttzt und Intel C-State aktiviert ist.
[Enabled] Verbessert die der dynamischen IO-Last angepasste Leistung
Deutsch
Hinweis: Die folgenden Elemente werden angezeigt, wenn Intel Turbo Boost
aktiviert ist.
Long Duration Power Limit (W) [Auto]
Hier stellen Sie die TDP Leistungsgrenze fr die CPU in Turbo Boost Modus ein.
Long Duration Maintained (s) [Auto]
Hier stellen Sie den Zeitraum (ms) fr die TDP Leistungsgrenze (W) ein.
Short Duration Power Limit (W) [Auto]
Hier stellen Sie die TDP Leistungsgrenze fr CPU in Turbo Boost Modus ein.
CPU Current limit (A) [Auto]
Hier legen Sie die maximale Stromgrenze der CPU im Turbo Boost Modus fest.
Wenn der Strom ber den angegebenen Grenzwert steigt, verringert die CPU
automatisch Core-Frequenz.
1/2/3/4-Core Ratio Limit [Auto]
Diese Option erscheint nur, wenn eine CPU installiert ist, die diese Funktion
untersttzt. Hier knnen Sie den CPU Multiplikator in den verschiedenen aktiven
Kernen im Turbo Boost Modus einstellen. Diese Option wird angezeigt, wenn der
installierte Prozessor diese Funktion untersttzt.
98
H81M-P33/ H81M-E33/ H87M-
P33/ H87M-E33/ B85M-P33/ B85M-E33 (MS-7817 v1.X) Micro-ATX.
H81M-P33/ H81M-E33/ H87M-P33/ H87M-E33/ B85M-P33/
B85M-E33 Intel H81/ H87/ B85
. H81M-P33/ H81M-E33/ H87M-P33/
H87M-E33/ B85M-P33/ B85M-E33
,
Intel LGA1150.
Top : mouse CPUFAN
Bottom: keyboard
USB3.0 ports
DVI-D port
(for H81M-P33/
H87M-P33/ B85M-P33)
SYSFAN2
HDMI port
(for H81M-E33/
H87M-E33/ B85M-E33)
JPWR1
VGA port
JUSB_PW1
DIMM1
DIMM2
SYSFAN1
T:Line-In
M:Line- Out
B:MIC-Int
PCI _E1
JBAT1
PCI _E2
JCI1
SATA2
99
2x DDR3 16
DDR3 1600/ 1333/ 1066
non-ECC,
1x PCIe x16 ()
1x PCIe 2.0 x1
1x HDMI (),
2560x1600@60, 24bpp/
1920x1080@60, 36bpp
1x DVI-D (),
1920x1200 @ 60, 24bpp
1x VGA,
1920x1200 @ 60, 24bpp
100
1x PS/2
1x PS/2
4x USB 2.0
2x USB 3.0
1x HDMI ()
1x DVI-D ()
1x VGA
1x LAN (RJ45)
3x
1x 24- ATX
1x 4- ATX 12
4x SATA
2x USB 2.0 ( 4
USB 2.0)
1x 4-
1x 4-
1x 3-
1x
2x
1x
1x CMOS
2x USB
Multi-
- Micro-ATX -
8.9 x 6.8 (22.6 x 17.3 )
. -
http://www.msi.com/service/cpu-support/
. -
http://www.msi.com/service/test-report/
101
H81M-P33 H81M-E33 H87M-P33
RAID
Small Business
Advantage
H87M-E33 B85M-P33 B85M-E33
RAID
Small Business
Advantage
102
PS/2 LAN
USB 2.0
VGA
HDMI
PS/2 LAN
USB 2.0
VGA
DVI-D
LAN
LINK/ACT SPEED
LED LED
.
Link/ Activity LED
(/
)
. 10 /
Speed LED
( 100 /
)
1 /
103
.
.
.
.
, :
http://youtu.be/bf5La099urI
1. .
2.
.
3. .
, .
.
4. .
.
104
5.
. .
, .
6. ( )
.
.
7. .
8. ,
.
9. ,
.
. .
10.
.
11. , ,
.
.
,
.
,
. .
105
,
.
http://youtu.be/76yLtJaKlCQ
DDR3 DDR2, DDR3
. DDR3
DDR3 DIMM.
.
106
JPWR1~2: ATX
ATX.
ATX
.
.
, .
http://youtu.be/gkDYyR_83I4
1 1.+ +1 B OK
2 1 2
1 0. VS R nd
.+ 2 V
1 .5 W u
3 V
.3
9 .P ro
V
8 .G 5V un
7 .+ ro nd
6 .G 5V u
5 + ro V
4 .G 3.3 3V
1 .G
.
3 .+ 3.
.G ro
2
2 .+
ro un
d
1
u d
n
d
2 3.+ +5 V
4
2 . 5 s n d
.G 5 V
2 1.+ Re ou un d
ro
2
2 0. Gr ro un #
u
V
2 . G o Nd
n
d
1 8. Gr -O un
JPWR2
9
1 7. PS o
3 .+1
.+ 2
1 6. Gr V V
1 V
1 5. -12 .3
2
JPWR1
V
1 4. +3
d
1 3.
1
JCOM1:
16550 16- FIFO.
c .
1 .C
0 T R
.N S
8 DS R
o
6 DT N
P
.
in
4 SI
.
2
.
9 . R r ou T
.R T n
7 G U
I S d
5 . SO C D
.
3 .D
1
107
SATA1~4: SATA
SATA.
SATA SATA.
SATA ,
(-/ DVD-/ Blu-Ray-).
, SATA
.
http://youtu.be/RZsMpqxythc
SATA
. ,
(-
/ DVD-/ Blu-Ray-).
.
SATA (
, ,
) .
. SATA.
SATA . ,
.
SATA .
.
JCI1:
, .
.
.
BIOS.
1 .C
.G IN
2
ro T
u RU
n
d
108
CPUFAN,SYSFAN1~2:
+12 .
,
.
.
.
.
.
1 .+ o U
.G 1
2 .N
1 + en e
ro 2V se
3
.G 1 s d
2 .S pe
u
.
ro 2V e Co
3 .S
n
d
u
4
n
d
n
tr
o
l
, ,
-
.
. Command Center
.
,
,
.
,
.
109
JFP1, JFP2:
,
. JFP1
Intel Front Panel I/O Connectivity Design.
,
. ,
.
,
.
http://youtu.be/DPELIdVNZUI
P
o
w
e
r
S
P
1
w
0
o
it
.N
w
ch
e
o 8.
r
P -
L
in
E
D
6 .-
.+
4 +
2
.
4 S CC ak
.V p 5 e
3 .V pe
C ea
.
9 .+
2 .S
C ke
JFP1
.R
5 r
7 -
JFP2
1
e R
5 .-
se e
.
3 .+
rv se
e
1
d Sw
r
H
t
D
D
it
L
ch
E
D
, ,
, .
.
, ,
JFP1.
C un +
6 .U C
.U S
4 VC
2
d
.
9 .G SB 0-
.N r o 0
7 U B
o u +
5 .U CC
P nd
.
in
3 .V
1
,
VCC GND.
110
. Intel Front Panel I/O
3
L in
p 2
e D ta in
n
o N a p 1
h E R d ta pin 0
P _S ne e s & da ta pi
n
d o
a E h m s & da ta
e NS P ra re s a
F d s & d
JAUD1:
.H E d C ad dre ss &
9 .S ea R P re s
7 H IC L
. .L C d d s
5 .M IC 3 P a d re
1 .L C a d et
3 .M 11 .LP C ad es k
1 9 .LP C R loc
n 7 .LP C C
io 5 .LP C
ct
111
te 3 .LP
e 1
JTPM1:
D
e
n
o n
h io d
P
d ct n
u d
a
e in et
e ro un n r e
r
.H P D .G ro Pi we Q r ow
0 o 4
1 2.G o Po IR e p
1 .N IC 1 0.N V ial ow by
8 M C nd
.
6 .N ou 1 .5 er P nd
8 S 3V ta
4 Gr
Connectivity Design.
.
. 6 .3. S
2 4 .3V
2
JBAT1: CMOS
CMOS
. CMOS
() .
( CMOS ),
.
1 1
CMOS
.
. CMOS , ..
.
JUSB_PW1
( USB
PS/2 1 1
) (
)
JUSB_PW2
1 1
( USB
(
) )
112
PCI_E1~2: PCIe
PCIe PCIe.
PCIe 2.0 x1
,
.
.
113
BIOS
.
:
SETUP.
.
,
,
BIOS.
" " <Enter> BIOS
.
BIOS,
- BIOS.
BIOS
POST
(Power On Self Test). , ,
<DEL> :
Press DEL key to enter Setup Menu, F11 to enter Boot Menu (
DEL , F11
)
-
, ,
, RESET.
, <Ctrl>+<Alt>+<Delete>.
MSI
BIOS. GO2BIOS MSI Fast Boot
GO2BIOS" ()
BIOS .
"GO2BIOS"
"MSI Fast Boot".
MSI Fast Boot BIOS.
114
BIOS .
Virtual
OC Genie
BIOS
BIOS
OC
.
.
.
, OC Genie.
115
Current CPU/ DRAM/ Ring Frequency
,
Ring. .
CPU Ratio Mode [Auto]
.
[Auto]
BIOS.
[Fixed Mode] .
[Dynamic Mode]
.
Adjust CPU Ratio [Auto]
. ,
.
Adjusted CPU Frequency
. .
EIST [Enabled]
Enhanced Intel SpeedStep.
Intel Turbo Boost [Enabled]
Intel Turbo Boost. ,
.
[Enabled]
.
[Disabled] .
Enhanced Turbo [Auto]
Enhanced Turbo
.
[Auto]
BIOS.
[Enabled]
.
[Disabled] .
Adjust Ring Ratio [Auto]
Ring.
.
Adjusted Ring Frequency
Ring.
.
Adjust GT Ratio [Auto]
.
.
116
Adjusted GT Frequency
.
.
DRAM Frequency [Auto]
(DRAM). ,
.
Adjusted DRAM Frequency
DRAM. .
DRAM Timing Mode [Auto]
.
[Auto] DRAM
SPD (Serial Presence Detect) .
[Link] DRAM
.
[UnLink] DRAM
.
Advanced DRAM Configuration
<Enter> .
[Link] [Unlink] DRAM Timing Mode.
.
.
, , CMOS
. (.
CMOS/ CMOS BIOS,
.)
Memory Fast Boot [Auto]
.
[Auto]
BIOS.
[Enabled]
.
.
[Disabled]
.
DRAM Voltage [Auto]
. Auto, BIOS
.
.
Spread Spectrum
EMI ( ),
.
117
[Enabled] EMI
( ).
[Disabled] .
, [Disabled] (.)
. ,
, Spread Spectrum
.
Spread Spectrum,
, .
Spread Spectrum
, .
Spread Spectrum,
. ,
.
CPU Features
<Enter> .
Hyper-Threading Technology [Enabled]
Hyper-threading
. Intel Hyper-Threading
.
.
[Enable] Intel Hyper-Threading.
[Disabled] ,
.
Active Processor Cores [All]
.
Limit CPUID Maximum [Disabled]
CPUID.
[Enabled] BIOS
CPUID
,
CPUID.
[Disabled]
CPUID.
Execute Disable Bit [Enabled]
Intels Execute Disable Bit
,
, .
.
118
[Enabled] NO-Execution
.
[Disabled] .
Intel Virtualization Tech [Enabled]
Intel Virtualization.
[Enabled] Intel Virtualization
.
.
[Disabled] .
Hardware Prefetcher [Enabled]
(MLC Streamer
prefetcher).
[Enabled]
L2
.
[Disabled] .
Adjacent Cache Line Prefetch [Enabled]
(MLC Spatial
prefetcher).
[Enabled]
.
[Disabled] .
CPU AES Instructions [Enabled]
CPU AES (Advanced Encryption
Standard-New Instructions). ,
.
[Enabled] Intel AES.
[Disabled] Intel AES.
Intel Adaptive Thermal Monitor [Enabled]
.
[Enabled] ,
.
[Disabled] .
Intel C-State [Auto]
C-state- ,
ACPI.
[Auto]
BIOS.
[Enabled]
.
[Disabled] .
119
C1E Support [Disabled]
C1E
. Intel C-
State.
[Enabled] C1E
.
[Disabled] .
Package C State limit [Auto]
C-state
. Intel C-
State.
[Auto]
BIOS.
[C0~C7s] (C7s,
C7, C6, C3, C2, C0).
[No limit] C-state .
LakeTiny Feature [Disabled]
Intel Lake Tiny iRST SSD.
,
Intel C-State.
[Enabled] IO
SSD.
[Disabled] .
: Intel TurboBoost.
Long Duration Power Limit (W) [Auto]
TDP CPU
Turbo Boost.
Long Duration Maintained (s) [Auto]
Long Duration Power Limit.
Short Duration Power Limit (W) [Auto]
TDP
Turbo Boost.
CPU Current limit (A) [Auto]
Turbo
Boost. ,
.
1/2/3/4-Core Ratio Limit [Auto]
,
.
turbo boost. ,
.
120
H81M-P33/ H81M-E33/ H87M-P33/ H87M-E33/ B85M-P33/ B85M-
E33 (MS-7817 v1.X) Micro-ATX H81M-P33/ H81M-E33/ H87M-P33/
H87M-E33/ B85M-P33/ B85M-E33 Intel H81/ H87/ B85
Intel LGA1150 H81M-P33/ H81M-E33/
H87M-P33/ H87M-E33/ B85M-P33/ B85M-E33
USB3.0 ports
DVI-D port
(for H81M-P33/
H87M-P33/ B85M-P33)
SYSFAN2
HDMI port
(for H81M-E33/
H87M-E33/ B85M-E33)
JPWR1
VGA port
JUSB_PW1
DIMM1
DIMM2
SYSFAN1
T:Line-In
M:Line- Out
B:MIC-Int
PCI _E1
JBAT1
PCI _E2
JCI1
SATA2
121
2 DDR3 16GB
DDR3 1600/ 1333/ 1066 MHz
-ECC, -
1 PCIe x16 ()
1 PCIe 2.0 x1
1 PS/2
1 PS/2
4 USB 2.0
2 USB 3.0
1 HDMI ()
1 DVI-D ()
1 VGA
1 LAN (RJ45)
3
122
1 24-pin ATX
1 4-pin ATX 12V
4 SATA
2 USB 2.0 ( 4 USB 2.0 )
1 4-pin CPU
1 4-pin
1 3-pin
1
2
1
1 CMOS
2 USB
Micro-ATX
8.9 in. x 6.8 in. (22.6 x 17.3 )
CPU
http://www.msi.com/service/cpu-support/
http://www.msi.com/service/test-report/
123
H81M-P33 H81M-E33 H87M-P33
RAID
Small Business
Advantage
H87M-E33 B85M-P33 B85M-E33
RAID
Small Business
Advantage
124
PS/2 LAN
Mic
PS/2 USB 3.0 USB 2.0
PS/2 LAN
Mic
PS/2 USB 3.0 USB 2.0
LAN LED
LINK/ACT SPEED
LED LED
LED LED
Link/ Activity LED
/
10 Mbps
Speed LED
100 Mbps
1 Gbps
125
CPU &
CPUCPUCPU
CPU
CPU
CPU
http://v.youku.com/v_show/id_XNDkyOTY1NjQ0.html
1.
2.
CPU
3. CPUCPU
CPUCPU
4.
CPU
126
5. PnP PnP CPU
PnP
6. () CPU
CPU
7. CPU
8.
9.
10.
11. CPUCPU
CPUCPU
CPUCPU
CPU/ /
127
http://v.youku.com/v_show/id_XNDkyOTc5OTMy.html
DDR3DDR2DDR3
DDR3DDR3
128
ATX ATX
u d
ro un
.G ro
1 .G
2
I S d
.R T n
9 . R r ou T
http://v.youku.com/v_show/id_XNDkzODU0MDQw.html
7 G U
.
5 . SO C D
d 3 .D
n
u 1
ro
129
.G 5 V
V in
4 P
2 3.+ +5 V d o
2 . 5 s n d
2 .N S
2 1.+ Re ou un d 0 T R
2 0. Gr ro un # 1 .C
8 DS R
2 . G o Nd .
9
1 8. Gr -O un 6 DT N
JPWR1~2: ATX
.
1 7. PS o 4 SI
1 6. Gr V V .
JCOM1:
1 5. -12 .3 2
V
.3 1 4. +3
3 V 1 3.
.+ 2 V
2 1 2 1
1 1.+ +1 B OK
1 0. VS R nd
1 .5 W u
9 .P ro d
8 .G 5V un
7 .+ ro nd
6 .G 5V u
JPWR1
5 + ro V
.
4 .G 3.3 3V
3 .+ 3.
2 .+
1
SATA1~4: SATA
ATAATAATA
(HDD)(SSD), (CD/ DVD/ Blu-Ray)
SATA HDD
http://v.youku.com/v_show/id_XNDkzODU5MTky.html
ATA(HDD),
(SSD), (CD / DVD / Blu-Ray)
HDDSSD
ATA90
SATA
JCI1:
BIOS
1 .C
.G IN
2
ro T
u RU
n
d
130
CPUFAN,SYSFAN1~2:
+12V
CPU
1 .+ o U
.G 1
2 .N
1 + en e
ro 2V se
3
.G 1 s d
2 .S pe
u
.
ro 2V e Co
3 .S
n
d
u
4
n
d
n
tr
o
l
CPU CPU
Command Center
CPU
131
JFP1, JFP2:
JFP1IntelI/O
M
MM
http://v.youku.com/v_show/id_XNDkyOTg3NjMy.html
P
o
w
e
r
S
P
1
w
0
o
it
.N
w
ch
e
o 8.
r
P -
L
in
E
D
6 .-
.+
4 +
2
.
4 S CC ak
.V p 5 e
3 .V pe
C ea
.
9 .+
2 .S
C ke
JFP1
.R
5 r
7 -
JFP2
1
e R
5 .-
se e
.
3 .+
rv se
e
1
d Sw
r
H
t
D
D
it
L
ch
E
D
M
JFP1
C un +
6 .U C
.U S
4 VC
2
d
.
9 .G SB 0-
.N r o 0
7 U B
o u +
5 .U CC
P nd
.
in
3 .V
1
VCC GND
132
IntelI/O
TPM()()TPM
3
L in
p 2
e D ta in
n
o N a p 1
h E R d ta pin 0
P _S ne e s & da ta pi
n
d o
a E h m s & da ta
e NS P ra re s a
.H E d F d s & d
9 .S ea R C ad dre ss &
P re s
7 H IC L
. .L C d d s
5 .M IC 3 P a d re
1 .L C a d et
3 .M 11 .LP C ad es k
1 9 .LP C R loc
n 7 .LP C C
io 5 .LP C
ct
133
te 3 .LP
e 1
D
e
n
o n
JAUD1:
h io d
P
d ct n
u d
a e ro un n r r
JTPM1: TPM
e in et e
.H P D .G ro Pi we Q r ow
0 o 4
1 2.G o Po IR e p
1 .N IC 1 0.N V ial ow by
8 M C nd
.
6 .N ou 1 .5 er P nd
8 S 3V ta
4 Gr .
6 .3. S
.
2 4 .3V
2
JBAT1: CMOS
CMOS RAM
CMOS RAM
CMOS RAM
1 1
CMOS RAM
CMOS
JUSB_PW1
(
USB 1 1
PS/2 )
()
JUSB_PW2
1 1
( USB
) ()
134
PCI_E1~2: PCIe
PCIe PCIe
PCIe 2.0 x1
135
BIOS SetupBIOS
Setup :
SETUP
BIOS
"Restore Defaults" BIOS <Enter>
BIOS BIOS
BIOS
POST()
<DEL> BIOS:
Press DEL key to enter Setup Menu, F11 to enter Boot Menu
DEL F11
Setup
Reset<Ctrl><Alt><Delete>
MSIBIOSMSI Fast Boot
GO2BIOSGO2BIOS" ()
BIOS
MSI Fast Boot BIOS
136
CLICK BIOS II ,
BIOS
BIOS
OC
,
OC Genie
137
Current CPU/ DRAM/ Ring Frequency
CPU Ring
CPU Ratio Mode [Auto]
CPU
[Auto] BIOS
[Fixed Mode] CPU
[Dynamic Mode] CPUCPU
Adjust CPU Ratio [Auto]
Adjusted CPU Frequency
CPU
EIST [Enabled]
Intel SpeedStep
Intel Turbo Boost [Enabled]
Intel Turbo BoostCPU
[Enabled] CPU
[Disabled]
Enhanced Turbo [Auto]
CPU Enhanced Turbo CPU
[Auto] BIOS
[Enabled] CPUIntel Turbo Boost
[Disabled]
Adjust Ring Ratio [Auto]
ring ratio CPU
138
DRAM Timing Mode [Auto]
[Auto] BIOS
[Enabled]
[Disabled]
DRAM Voltage [Auto]
"Auto" BIOS
Spread Spectrum
EMI ()
[Enabled] spread spectrum EMI (Electromagnetic
Interference)
[Disabled] CPU
EMI
[Disabled]EMISpread Spectrum()
EMI
Spread Spectrum () EMI
Spread Spectrum () EMI
, Spread Spectrum ()
CPU Features
<Enter>
Hyper-Threading Technology [Enabled]
[Enable] Intel Hyper-Threading
[Disabled] HT
139
Active Processor Cores [All]
Limit CPUID Maximum [Disabled]
CPUID
[Enabled] CPUIDBIOS
CPUID
[Disabled] CPUID
Execute Disable Bit [Enabled]
[Enabled] NO-Execution
[Disabled]
Intel Virtualization Tech [Enabled]
Intel
[Enabled] Intel
.
[Disabled]
Hardware Prefetcher [Enabled]
CPU (MLC Streamer prefetcher).
[Enabled] CPUL2
[Disabled] CPU
Adjacent Cache Line Prefetch [Enabled]
CPU
[Enabled]
[Disabled] CPU
140
C1E Support [Disabled]
CPU"Intel C-State"
[Enabled] C1ECPU
[Disabled]
Package C State limit [Auto]
CPU C-state "Intel C-State"
[Auto] BIOS
[C0~C7s] C7s, C7, C6, C3, C2, C0
[No limit] CPUC-state
LakeTiny Feature [Disabled]
SSDiRSTIntel Lack TinyCPU
Intel C-State
[Enabled] IO
[Disabled]
141
142
H81M-P33/ H81M-E33/ H87M-P33/ H87M-E33/ B85M-P33/ B85M-E33
(MS-7817 v1.X) Micro-ATX Intel H81/ H87/ B85
Intel LGA1150
H81M-P33/ H81M-E33/ H87M-P33/ H87M-E33/ B85M-P33/ B85M-E33
USB3.0 ports
DVI-D port
(for H81M-P33/
H87M-P33/ B85M-P33)
SYSFAN2
HDMI port
(for H81M-E33/
H87M-E33/ B85M-E33)
JPWR1
VGA port
JUSB_PW1
DIMM1
DIMM2
SYSFAN1
T:Line-In
M:Line- Out
B:MIC-Int
PCI _E1
JBAT1
PCI _E2
JCI1
SATA2
143
2 DDR3 16GB
DDR3 1600/ 1333/ 1066 MHz
non-ECCun-buffered
1 PCIe x16 ()
1 PCIe 2.0 x1
1 HDMI ()
2560x1600@60Hz, 24bpp/ 1920x1080@60Hz, 36bpp
1 DVI-D () 1920x1200
@ 60Hz, 24bpp
1 VGA 1920x1200 @ 60Hz,
24bpp
- 2 USB 3.0 ()
- 8 USB 2.0 (4 4 *)
144
1 PS/2
1 PS/2
4 USB 2.0
2 USB 3.0
1 HDMI ()
1 DVI-D ()
1 VGA
1 LAN (RJ45)
3
1 24-pin ATX
1 4-pin ATX 12V
4 SATA
2 USB 2.0 ( 4 USB 2.0 )
1 4-pin CPU
1 4-pin
1 3-pin
1
2
1
1 CMOS
2 USB
Micro-ATX
8.9 x 6.8 (22.6 x 17.3 )
CPU
http://www.msi.com/service/cpu-support/
http://www.msi.com/service/test-report/
145
H81M-P33 H81M-E33 H87M-P33
RAID
Small Business
Advantage
H87M-E33 B85M-P33 B85M-E33
RAID
Small Business
Advantage
146
PS/2
USB 2.0
HDMI VGA
PS/2 USB 3.0 USB 2.0
PS/2
USB 2.0
DVI-D VGA
PS/2 USB 3.0 USB 2.0
LINK/ACT SPEED
LED LED
LED LED
Off
Link/ Activity LED
(/)
Data activity
Off 10 Mbps
Speed LED
100 Mbps
()
1 Gbps
147
CPU
CPU CPU
CPU CPU CPU
CPU &
http://youtu.be/bf5La099urI
1.
2.
CPU CPU
3. CPU CPU
4.
CPU
148
5. PnP CPU PnP
CPU PnP
6. CPU () CPU
7. CPU
8.
9. 4
10.
11. CPU CPU
CPU CPU
CPU CPU
CPU
149
http://youtu.be/76yLtJaKlCQ
DDR3 DDR2
DDR3 DDR3
150
ATX 24-pin
16 FIFO 16550A
V
2
1 V
.+ 2
3 .+1
ATX
4
d
n
JPWR2
u d
ro un
.G ro
1 .G
2
I S d
.R T n
9 . R r ou T
7 G U
.
5 . SO C D
d 3 .D
n
u 1
ro
151
.G 5 V
V in
4 P
2 3.+ +5 V d o
2 . 5 s n d
2 .N S
2 1.+ Re ou un d 0 T R
2 0. Gr ro un # 1 .C
2 . G o Nd 8 DS R
JPWR1~2ATX
.
9
1 8. Gr -O un 6 DT N
.
1 7. PS o 4 SI
1 6. Gr V V 2
.
1 5. -12 .3
http://youtu.be/gkDYyR_83I4
V
.3 1 4. +3
3 V 1 3.
JCOM1
.+ 2 V
2 1 2 1
1 1.+ +1 B OK
1 0. VS R nd
1 .5 W u
9 .P ro d
8 .G 5V un
7 .+ ro nd
6 .G 5V u
JPWR1
5 + ro V
.
4 .G 3.3 3V
3 .+ 3.
2 .+
1
SATA1~4SATA
SATA SATA SATA (HDD)
(SSD) (CD/ DVD/ Blu-Ray)
SATA
http://youtu.be/RZsMpqxythc
SATA (CD/ DVD/ Blu-
Ray)
SATA
SATA
SATA 90
SATA
JCI1
BIOS
1 .C
.G IN
2
ro T
u RU
n
d
152
CPUFAN,SYSFAN1~2
+12V
CPU
1 .+ o U
.G 1
2 .N
1 + en e
ro 2V se
3
.G 1 s d
2 .S pe
u
.
ro 2V e Co
3 .S
n
d
u
4
n
d
n
tr
o
l
CPU CPU
Command Center CPU
153
JFP1, JFP2
LED JFP1 Intel /
M-Connector
M-Connector M-Connector
http://youtu.be/DPELIdVNZUI
P
o
w
e
r
S
P
1
w
0
o
it
.N
w
ch
e
o 8.
r
P -
L
in
E
D
6 .-
.+
4 +
2
.
4 S CC ak
.V p 5 e
3 .V pe
C ea
.
9 .+
2 .S
C ke
JFP1
.R
5 r
7 -
JFP2
1
e R
5 .-
se e
.
3 .+
rv se
e
1
d Sw
r
H
t
D
D
it
L
ch
E
D
M-Connector
JFP1
JUSB1~2USB 2.0
USB USB MP3
1 .G S B1
0 r B -
.N o 1
8
C un +
6 .U C
.U S
4 VC
2
d
.
9 .G SB 0-
.N r o 0
7 U B
o u +
5 .U CC
P nd
.
in
3 .V
1
VCC GND
154
Intel /
TPM
3
L in
p 2
e D ta in
n
o N a p 1
h E R d ta pin 0
P _S ne e s & da ta pi
n
d o
a E h m s & da ta
e NS P ra re s a
.H E d F d s & d
9 .S ea R C ad dre ss &
P re s
7 H IC L
. .L C d d s
5 .M IC 3 P a d re
1 .L C a d et
3 .M 11 .LP C ad es k
1 9 .LP C R loc
n 7 .LP C C
io 5 .LP C
ct
155
te 3 .LP
e 1
D
e
n
o n
h io d
P
d ct n
u d
JTPM1TPM
a
e in et
e ro un n r e
r
.H P D .G ro Pi we Q r ow
0 o 4
1 2.G o Po IR e p
1 .N IC 1 0.N V ial ow by
8 M C nd
JAUD1
. 1 .5 er P nd
6 .N ou 8 S 3V ta
4 Gr .
6 .3. S
.
2 4 .3V
2
JBAT1 CMOS
CMOS RAMCMOS
RAM
CMOS RAM
1 1
CMOS RAM
CMOS RAM
JUSB_PW1
( USB
PS/2 ) 1 1
()
JUSB_PW2
1 1
( USB )
()
156
PCI_E1~2PCIe
PCIe PCIe
PCIe 2.0 x1
157
BIOS
:
BIOS
BIOS "Restore Defaults" <Enter>
BIOS
BIOS
POST ()
<DEL> :
Press DEL key to enter Setup Menu, F11 to enter Boot Menu
( DEL , F11 )
DEL BIOS
RESET <Ctrl><Alt>
<Delete>
MSI Fast Boot BIOS
158
BIOS
OC
Genie
BIOS
BIOS
OC Genie
159
Current CPU/ DRAM/ Ring Frequency
CPU Ring
CPU Ratio Mode [Auto]
CPU
[Auto] BIOS
[Fixed Mode] CPU
[Dynamic Mode] CPU CPU
Adjust CPU Ratio [Auto]
CPU CPU CPU
Adjusted CPU Frequency
CPU
EIST [Enabled]
Enhanced Intel SpeedStep
Intel Turbo Boost [Enabled]
Intel Turbo Boost CPU
[Enabled] CPU
[Disabled]
Enhanced Turbo [Auto]
CPU Turbo CPU
[Auto] BIOS
[Enabled] CPU
[Disabled]
Adjust Ring Ratio [Auto]
Ring CPU
Adjusted Ring Frequency
Ring
Adjust GT Ratio [Auto]
CPU
Adjusted GT Frequency
DRAM Frequency [Auto]
DRAM
Adjusted DRAM Frequency
160
DRAM Timing Mode [Auto]
[Auto] BIOS
[Enabled]
[Disabled]
DRAM Voltage [Auto]
(Auto)BIOS
Spread Spectrum
[Enabled]
[Disabled] CPU
(EMI) [Disabled]
EMI
CPU Features
<Enter>
Hyper-Threading Technology [Enabled]
Hyper-Threading
[Enable] Intel Hyper-Threading
[Disabled] Intel Hyper-Threading
161
Active Processor Cores [All]
Limit CPUID Maximum [Disabled]
CPUID
[Enabled] BIOS CPUID
[Disabled] CPUID
Execute Disable Bit [Enabled]
[Enabled] NO-Execution
[Disabled]
Intel Virtualization Tech [Enabled]
Intel
[Enabled]
[Disabled]
Hardware Prefetcher [Enabled]
(MLC Streamer prefetcher)
[Enabled] L2
CPU
[Disabled]
Adjacent Cache Line Prefetch [Enabled]
CPU (MLC Spatial prefetcher)
[Enabled]
[Disabled]
CPU AES Instructions [Enabled]
CPU AES () CPU
[Enabled] Intel AES
162
Intel C-State [Auto]
C-state ACPI
[Auto] BIOS
[Enabled]
[Disabled]
C1E Support [Disabled]
C1E CPU "Intel
C-State" [Enabled]
[Enabled] C1E CPU
[Disabled]
Package C State limit [Auto]
CPU C-state "Intel
C-State" [Enabled]
[Auto] BIOS
[[C0~C7s] C7s, C7, C6, C3, C2, C0
[No limit] CPU C-state
LakeTiny Feature [Disabled]
(SSD) iRST Intel Lake Tiny CPU
Intel C-State
[Enabled] IO SSD
[Disabled]
163
164
H81M-P33/ H81M-E33/ H87M-P33/ H87M-E33/ B85M-P33/ B85M-E33
(MS-7817 v1.X) Micro-ATX
H81M-P33/ H81M-E33/ H87M-P33/ H87M-E33/ B85M-P33/
B85M-E33H81/ H87/ B85Intel LGA1150
USB3.0 ports
DVI-D port
(for H81M-P33/
H87M-P33/ B85M-P33)
SYSFAN2
HDMI port
(for H81M-E33/
H87M-E33/ B85M-E33)
JPWR1
VGA port
JUSB_PW1
DIMM1
DIMM2
SYSFAN1
T:Line-In
M:Line- Out
B:MIC-Int
PCI _E1
JBAT1
PCI _E2
JCI1
SATA2
165
DDR3216GB
DDR3 1600/ 1333/ 1066 MHz
non-ECCun-buffered
PCIe x16 x1 ()
PCIe 2.0 x1 x1
HDMI() x12560x1600@60Hz,
24bpp/ 1920x1080@60Hz, 36bpp
DVI-D() x11920x1200 @ 60Hz,
24bpp
VGA x11920x1200 @ 60Hz, 24bpp
Realtek ALC887
166
I/O PS/2 x1
PS/2 x1
USB 2.0 x4
USB 3.0 x2
HDMI x1 ()
DVI-D x1 ()
VGA x1
LAN (RJ45) x1
x3
24ATX x1
4ATX 12V x1
SATA x4
USB 2.0 x2 (4USB 2.0)
4CPU x1
4 x1
3 x1
x1
x2
x1
CMOS x1
USB x2
Micro-ATX
8.9 in. x 6.8 in. (22.6 cm x 17.3 cm)
CPUWeb
http://www.msi.com/service/cpu-support/
Web
http://www.msi.com/service/test-report/
167
H81M-P33 H81M-E33 H87M-P33
RAID
Small Business
Advantage
H87M-E33 B85M-P33 B85M-E33
RAID
Small Business
Advantage
168
I/O
PS/2 LAN
Mic
PS/2 USB 3.0 USB 2.0
PS/2 LAN
Mic
PS/2 USB 3.0 USB 2.0
LAN LED
LINK/ACT SPEED
LED LED
LED LED
Off
Link/ Activity LED
(/
LED)
Off 10 Mbps
Speed LED
100 Mbps
(LED)
1 Gbps
169
CPU
CPU
CPU
CPUCPU
CPU
CPU
http://youtu.be/bf5La099urI
1.
2.
CPU
3. CPUCPU
CPUCPU
4.
CPU
170
5. PnPCPU
PnP CPU
PnP
6. CPUCPU(
)
7. CPU
8. CPU
CPU
9. CPU
10.
11. CPU
CPU
CPU
CPU/
171
http://youtu.be/76yLtJaKlCQ
DDR3DDR2
DDR3DDR3
DDR2
172
ATX
ATX
16550A16FIFO
V
2
1 V
.+ 2
3 .+1
4
d
n
JPWR2
u d
ro un
.G ro
1 .G
2
I S d
.R T n
9 . R r ou T
7 G U
.
5 . SO C D
d 3 .D
JCOM1:
n
u 1
ro
173
.G 5 V
V in
4 P
2 3.+ +5 V
JPWR1~2: ATX
d o
2 . 5 s n d
2 .N S
2 1.+ Re ou un d 0 T R
2 0. Gr ro un # 1 .C
8 DS R
2 . G o Nd .
9
1 8. Gr -O un 6 DT N
.
1 7. PS o 4 SI
1 6. Gr V V 2
.
1 5. -12 .3
http://youtu.be/gkDYyR_83I4
V
.3 1 4. +3
3 V 1 3.
.+ 2 V
2 1 2 1
1 1.+ +1 B OK
1 0. VS R nd
1 .5 W u
9 .P ro d
8 .G 5V un
7 .+ ro nd
6 .G 5V u
JPWR1
5 + ro V
.
4 .G 3.3 3V
3 .+ 3.
2 .+
1
SATA1~4: SATA
SATA
SATASATA
(HDD) (SSD) (CD/ DVD/
Blu-Ray)
SATA HDD
http://youtu.be/RZsMpqxythc
SATA
(HDD) (SSD)
(CD/ DVD/ Blu-Ray)
SATA
HDDSSD
SATA
SATA90
SATA
JCI1:
2
BIOS
1 .C
.G IN
2
ro T
u RU
n
d
174
CPUFAN,SYSFAN1~2:
+12V
CPU
1 .+ o U
.G 1
2 .N
1 + en e
ro 2V se
3
.G 1 s d
2 .S pe
u
.
ro 2V e Co
3 .S
n
d
u
4
n
d
n
tr
o
l
CPU
Command
CenterCPU
175
JFP1, JFP2:
JFP1
M-Connector
M-ConnectorJFP1
http://youtu.be/DPELIdVNZUI
P
o
w
e
r
S
P
1
w
0
o
it
.N
w
ch
e
o 8.
r
P -
L
in
E
D
6 .-
.+
4 +
2
.
4 S CC ak
.V p 5 e
3 .V pe
C ea
.
9 .+
2 .S
C ke
JFP1
.R
5 r
7 -
JFP2
1
e R
5 .-
se e
.
3 .+
rv se
e
1
d Sw
r
H
t
D
D
it
L
ch
E
D
M-Connector()
JFP1
C un +
6 .U C
.U S
4 VC
2
d
.
9 .G SB 0-
.N r o 0
7 U B
o u +
5 .U CC
P nd
.
in
3 .V
1
VCCGND
176
3
L in
p 2
e D ta in
n
o N a p 1
h E R d ta pin 0
P _S ne TPM e s & da ta pi
n
d o
a E h m s & da ta
JAUD1:
e NS P ra re s a
.H E d F d s & d
9 .S ea R C ad dre ss &
P re s
7 H IC L
. .L C d d s
5 .M IC 3 P a d re
1 .L C a d et
3 .M 11 .LP C ad es k
1 9 .LP C R loc
JTPM1: TPM
n 7 .LP C C
io 5 .LP C
ct
177
te 3 .LP
e 1
D
e
n
o n
h io d
P
d ct n
u d
a
e in et
e ro un n r e
r
.H P D .G ro Pi we Q r ow
0 o 4
1 2.G o Po IR e p
1 .N IC 1 0.N V ial ow by
8 M C nd
.
6 .N ou 1 .5 er P nd
8 S 3V ta
4 Gr .
6 .3. S
.
2 4 .3V
2
JBAT1: CMOS
BIOSCMOS
CMOSOS
1 1
CMOS RAM
CMOS
JUSB_PW1
(I/OUSB
1 1
& PS/2
) ()
JUSB_PW2
1 1
(USB
) ()
178
PCI_E1~2: PCIe
PCIePCIe
PCIe 2.0 x1
BIOS
179
BIOS
BIOS
SETUP
BIOS
"Restore Defaults"
BIOS<Enter>
BIOSBIOS
BIOS
POST(Power On Self Test)
<DEL>BIOS
Press DEL key to enter Setup Menu, F11 to enter Boot Menu
(<DEL>F11
)
<DEL>
<RESET>
<Ctrl><Alt><Delete>
MSIBIOS2
MSI Fast Boot GO2BIOS
GO2BIOS()PC
BIOS
BIOS MSI Fast Boot
180
BIOS
Virtual OC
Genie
BIOS
BIOS
OC
PC
OC Genie
181
Current CPU/ DRAM/ Ring Frequency
CPURing
CPU Ratio Mode [Auto]
CPU
[Auto] BIOS
[Fixed Mode] CPU
[Dynamic Mode] CPUcpu
Adjust CPU Ratio [Auto]
CPUCPUCPU
Adjusted CPU Frequency
CPU
EIST [Enabled]
Enhanced Intel SpeedStep
Intel Turbo Boost [Enabled]
CPU
[Enabled] CPU
CPU
[Disabled]
Enhanced Turbo [Auto]
CPUEnhanced Turbo
[Auto] BIOS
[Enabled] CPU
[Disabled]
Adjust Ring Ratio [Auto]
RingCPU
Adjusted Ring Frequency
Ring
Adjust GT Ratio [Auto]
CPU
Adjusted GT Frequency
182
DRAM Timing Mode [Auto]
CMOS
(CMOS/BIOS
)
Memory Fast Boot [Auto]
[Auto] BIOS
[Enabled]
[Disabled]
DRAM Voltage [Auto]
AutoBIOS
Spread Spectrum
[Disabled]
[Enabled]
Spread Spectrum
[Disabled]
183
CPU Features
<Enter>
Hyper-Threading Technology [Enabled]
CPUCPU
CPU
[Enable]
[Disabled] HT
Active Processor Cores [All]
Limit CPUID Maximum [Disabled]
CPUID
[Enabled] CPUID
OSBIOSCPUID
[Disabled] CPUID
Execute Disable Bit [Enabled]
[Enabled] NO-Execution
[Disabled]
Intel Virtualization Tech [Enabled]
[Enabled]
OS
[Disabled]
Hardware Prefetcher [Enabled]
(MLC)
[Enabled] CPU
L2
[Disabled]
184
[Enabled]
[Disabled]
CPU AES Instructions [Enabled]
CPU AES (Advanced Encryption Standard-New Instructions)
CPU
[Enabled] AES
[Disabled] AES
Intel Adaptive Thermal Monitor [Enabled]
CPU
[Enabled] CPUCPU
[Disabled]
Intel C-State [Auto]
C-stateACPI
[Auto] BIOS
[Enabled] CPU
[Disabled]
C1E Support [Disabled]
HaltC1EIntel C-State
[Enabled] HaltC1ECPU
[Disabled]
Package C State limit [Auto]
CPU C-state
Intel C-State
[Auto] BIOS
[C0~C7s] C7s, C7, C6, C3,
C2,C0
[No limit] CPUC-state
LakeTiny Feature [Disabled]
iRSTSSDIntel Lake Tiny
CPUIntel
C-State
[Enabled] IO
SSD
[Disabled]
185
: "Intel Turbo Boost "
Long Duration Power Limit (W) [Auto]
TDP
Long Duration Maintained (s) [Auto]
"Long duration power Limit(W)"
Short Duration Power Limit (W) [Auto]
CPUTDP
CPU Current limit (A) [Auto]
CPU
CPU
1/2/3/4-Core Ratio Limit [Auto]
CPU
CPU
186