Professional Documents
Culture Documents
SRS FBSR HO - BSR MR 2812 - Approved PDF
SRS FBSR HO - BSR MR 2812 - Approved PDF
SRS-FBSR-HO
Handover
Contents ii
Handover Attributes
PUBLICATION HISTORY Object ID:SRS-FBSR-HO-113
30/May/2014 Extended population of Assigned RAB Parameters for 4.0 BSR-MR- Nigel
Extended Maximum bit rate 2812 Bradley
The BSR shall construct a RANAP Relocation Request Acknowledge message for each Core Network domain Object ID:SRS-FBSR-HO-
involved in the Handover as follows: 1691
Object Type:SRS Requirement
Message Type = RELOCATION REQUEST ACKNOWLEDGE (TS 25.413, 9.2.1.1) Feature Number:b101684
Review Status:Approved
Target RNC To Source RNC Transparent Container (TS 25.413, 9.2.1.30)
Product Elements:BSR-Femto
RRC Container (ref. SRS-FBSR-HO-889)
The RRC container carries the Radio Bearer Reconfiguration message.
RABs Setup List (shall contain a list of successfully setup RABs for that domain)
RABs Setup Item IEs
RAB ID (TS 25.413, 9.2.1.2)
shall be set as in the RANAP Relocation Request
Transport Layer Address (TS 25.413, 9.2.2.1)
(for CS RAB, SRS-FBSR-HO-867; for PS RABs, SRS-FBSR-1682)
Transport Layer Association (TS 25.413, 9.2.2.2)
(for CS RAB, SRS-FBSR-HO-867; for PS RABs, SRS-FBSR-1682)
Assigned RAB parameter values (for applicable PS RABs only) (TS 25.413, 9.2.1.44)
RABs Failed To Setup List (shall contain a list of preserved RABs for that domain)
RABs Failed To Setup Item IEs
RAB ID
shall be set as in the RANAP Relocation Request (TS 25.413, 9.2.1.2)
Cause (TS 25.413, 9.2.1.4)
shall be set to cause value "Unable to Establish During Relocation"
Note: For reference, prior to BSR-MR-2812, requirement was "SRD-FBSR-RRM-060093 for non 0/0 kbps RABs,
otherwise omitted.", but needed to be extended for later release of RANAP.
3.4.6 LTE 4G Macro to Femto PS, CS and PS+CS Handover Object ID:SRS-FBSR-HO-
2602
RABs Setup List (shall contain a list of successfully setup RABs for that domain)
RABs Setup Item IEs
RAB ID (TS 25.413, 9.2.1.2)
shall be set as in the RANAP Relocation Request
Transport Layer Address (TS 25.413, 9.2.2.1)
(SRS-FBSR-HO-2686)
Transport Layer Association (TS 25.413, 9.2.2.2)
(SRS-FBSR-HO-2686)
Assigned RAB parameter values (only present for applicable PS RABs) (TS 25.413, 9.2.1.44)
shall be set according to:
SRD-FBSR-RRM-060093 for non 0/0 kbps RABs (see SRS-FBSR-HO- 1676), otherwise
omitted
SRS-FBSR-HO-2939 (extended by BSR-MR-2812)
RABs Failed To Setup List (only populated if SRS-FBSR-HO-2890 "failed" list of RABs is not empty)
RABs Failed to Setup Item IEs
RAB ID (TS 25.413, 9.2.1.2)
shall be set as in the RANAP Relocation Request
Cause (TS 25.413, 9.2.2.1)
(as per the "failed" list created by SRS-FBSR-HO-2890 & 2891)