The document provides instructions for launching two types of lifeboats. The instructions for the Davit Lifeboat involve drawing out the toggle pin, fastening painters, releasing the cradle clamp, boarding the lifeboat, and pulling the remote control wire to lower it to the surface. For the Dewi-Dewi type lifeboat, the instructions are to release the safety pin, tighten the front and back painter lines, release the cradle clamp, board the lifeboat, pull the remote control wire to lower it, start the engine, release the blocks, and release the painter lines. Caution is advised not to make adjustments during lowering and to only operate the lifeboat.
The document provides instructions for launching two types of lifeboats. The instructions for the Davit Lifeboat involve drawing out the toggle pin, fastening painters, releasing the cradle clamp, boarding the lifeboat, and pulling the remote control wire to lower it to the surface. For the Dewi-Dewi type lifeboat, the instructions are to release the safety pin, tighten the front and back painter lines, release the cradle clamp, board the lifeboat, pull the remote control wire to lower it, start the engine, release the blocks, and release the painter lines. Caution is advised not to make adjustments during lowering and to only operate the lifeboat.
The document provides instructions for launching two types of lifeboats. The instructions for the Davit Lifeboat involve drawing out the toggle pin, fastening painters, releasing the cradle clamp, boarding the lifeboat, and pulling the remote control wire to lower it to the surface. For the Dewi-Dewi type lifeboat, the instructions are to release the safety pin, tighten the front and back painter lines, release the cradle clamp, board the lifeboat, pull the remote control wire to lower it, start the engine, release the blocks, and release the painter lines. Caution is advised not to make adjustments during lowering and to only operate the lifeboat.
2FASTEN THE PAINTERS 3RELEASE THE CRADLE CLAMP 4BOARDING TO THE LIFEBOAT 5PULL THE REMOTE CONTROL WIRE AND LOWER THE LIFEBOAT TO THE SURFACE. CAUTION !!! DURING THE TURNING OUT, DO NOT MAKE THE INCHING OPERATION 1START UP THE ENGINE 2RELEASE THE BOAT FALL BLOCKS 3LET GO THE PAINTERS AND AWAY
INSTRUKSI PELUNCURAN SEKOCI TIPE DEWI-DEWI
1LEPASKAN PIN PENGAMAN
2KENCANGKAN TALI PAINTER DEPAN & BELAKANG 3LEPASKAN PENJEPIT CRADLE 4NAIK ATAU MASUK KE DALAM SEKOCI 5TARIK TALI KONTROL JARAK JAUH & TURUNKAN SEKOCI KE PERMUKAAN LAUT. PERHATIAN !!! SELAMA PROSES PELEPASAN SEKOCI JANGAN MELAKUKAN HAL LAIN TERHADAP SEKOCI 1HIDUPKAN MESIN SEKOCI 2LEPASKAN BLOK PENAHAN SEKOCI 3LEPASKAN TALI PAINTER DEPAN DAN BELAKANG