Professional Documents
Culture Documents
File
Configuration of stations A
2
This feature makes it possible to define particular characteristics for each station.
LOW
MIDDLE
HIGH
BARRNG VLOW
LOW Barring profiles
MIDDLE
HIGH
NORRES INHIBI Inhibition flag against system locking
Choice of
COST active
criteria
DURAT
INTER
ACTIVE
RV
RV
RNV
ACTIVE
TEMP
TRUNK
NUMBER
SUBADR
GOTO
LOCAL destination
Alcatel 4200
MMC-STATION SECTION CONFIGURATION OF STATIONS
SUBSCR Station No. SELFWD LIST1 STATE Definition of the selective forwarding calls :
- state : active or inactive
- mode : positive or negative
LIST2 MODE - destination
A
-callers identity
TARGET
CALLER
FEATUR
DROITS DROIT1
FEAT1
Authorization/unauthorization of monitored features
A
FEAT2 ((hold, intrusion, conference, automatic call-back etc...)
DROIT2
DROIT3
FEAT3
DROIT3
FEAT4
SERVIC
COUT SERVI1 Definition of such srvices :
(voice, G4 fax, AB, ISDN, all or none)
SERVI2
SERVI3
SERVI4
Allocation of a special feature (pager,
SPEDEV CHOICE voice mail, badge phone, doorphone)
Press SUBSCR
.
Before allocating a terminal profile or carrying out a remote customization of a station, this station must
be switched off by pressing OUTINS
A . After allocation, the station can be switched on again.
The station can be :
- switched on
- switched off
- switched off physically/switched off logically : station not operational
- switched off physically/switched on logically : station not regarded by the system (not declared or
disconnected) or switched off by the installer
Choosing INSERV
+ validation switches the station ON. Choosing OUTOFS
+ validation switches the station
OFF.
NOTE : Administrator session only allows the status of the station to be read.
Press TERMNL
A .
The directory number of the station, as well as the type of station is displayed.
Press NAME
A .
Enter the user's name and first name, in that order, by :
For more complex names, SN|FNJ enables you to intoduce a character which separates the surname and
first name (example : Luc Van Vliet : enter : van Vliet | Luc).
Press SUBPRO
A followed by FEATUR
.
Alcatel 4200
MMC-STATION SECTION CONFIGURATION OF STATIONS
LOW
VERY LOW MIDDLE HIGH
(default)
MV = automated attendant dyn. forward level 2 VMU2 YES YES YES YES
After allocating a profile, it is possible to modify the right to a particular feature category, station by
station, by using the RIGHTS feature presented on page 16 (the labels corresponding to the features are
given in the second column of the table).
Press SUBPRO
A followed by BARRNG
.
PROFILE
CONTENT
VERY LOW LOW (default) MIDDLE HIGH
Normal mode
16 12 8 4
(N)
St ti traffic
Station t ffi sharing
h i
Restricted mode
16 16 12 4
(R)
Trunk groups
1 2 3 4
1 to 7
Trunk groups
2 3 4 5
8 to 13
Barring level
of trunk groups Trunk groups
3 4 5 6
(result from the 14 to 19
b i matrix
barring t i with
ith
station barring below Trunk groups
4 5 6 1
and trunk ggroup p bar 20 to 25
ring
i by b ddefault)
f l)
Trunk groups 26
5 6 1 2
to 31
Trunk groups 32
6 1 2 3
to 36
Normal mode
1 2 3 4
(NV and NNV)
Station barring
(voice or data) Restricted mode
1 1 1 4
(RV and RNV)
Alcatel 4200
MMC-STATION SECTION CONFIGURATION OF STATIONS
NORRES
A is used to define the time range operating mode.
INHIBI
makes it possible to inhibit the switch to restricted mode. By pressing successively on CHOICE , you
can define whether changing the operating mode by operator command or by a key at central proces
sing level is taken into account for this station :
NORRES
by pressing successively on this key, you can choose the operating mode for the time range
concerned.
- inhibited : changing the operating mode is not possible for this station.
- possible : changing the operating mode is possible.
Press MTRCRT
A .
MONIT
: makes it possible to determine the printing conditions of metering statements or tickets for each
station ; by pressing successively on CHOICE , you can choose the type of communications to be monitored :
NOTE : A criterion is active when its label appears in capital letters on the first line of the
display. A criterion is inactive when its label appears in small letters on this first line.
Press MTR
to define the characteristics of metering recall.
DEST
makes it possible to define the destination of the recall.
ACTIVE
makes it possible to activate or inhibit the feature.
Press PWDRES
A . Validating makes it possible to return to the default value for the personal code of the
station concerned : 1515.
BARTYP
A makes it possible to define barring and traffic sharing link categories for each station.
NOTE : Barring link categories make it possible to define the controls carried out during a trunk sei
zure by a means other than the personal speed dial numbers or during the seizure of a trunk
group. Traffic sharing link categories define the controls for accessing the trunk groups (out
going traffic sharing).
REPENT
A makes it possible to define the personal speed dial numbers authorized for the stations. For
example, a station with category 10100000 will have access to the collective speed dial numbers in the
speed dial rights and traffic sharing categories.
NV
: speed dial rights link category for voice communications in normal mode
NNV
: speed dial rights link category for data communications in normal mode
RV
: speed dial rights link category for voice communications in restricted mode
RNV
: speed dial rights link category for data communications in restricted mode
RIGHTS
: by pressing successively on this key, define whether the station concerned has the right (1) or not
(0) to access the chosen directory list (NV, NNV, RV, RNV), then validate.
Alcatel 4200
MMC-STATION SECTION CONFIGURATION OF STATIONS
AUTOCA
A makes it possible to define :
: enter the destination of an automatic call (station's directory or hunting group number or external
DESTI
: by pressing successively on this key, define whether the automatic call is active (YES) or inactive
ACTIVE
Press PERSPD
A .
LABEL
makes it possible to enter 6 identification characters for the key associated to the called number.
TRUNK
makes it possible to enter the trunk number.
NUMBER
makes it possible to enter the number of the called party (up to 22 digits, trunk group included) ;
SPLIT
makes it possible to indicate a pause ; ! appears when split is selected indicating 'Pause', FORCMF
makes it possible to force a switch over to MF dialling ; / appears when ForcMF is selected indicating MF
dialing.
If the trunk number has been entered, enter the external number, then validate ; if no trunk number has
been entered, enter the number of the trunk group then the external number.
SUBADR
makes it possible to enter the sub-address (4 digits) if the called party's number has one.
GOTO
makes it possible to state the directory number which is to be programmed (1 to 30 for 4034
stations, 1 to 15 for 4023 stations and 1 to 10 for all other dedicated stations).
Remark :
The modifications are taken into account if the system indicates "Accepted" after validation.
NOTE : Before performing a remote customization of a station, the station must be switched off. It is
advisable to cancel a key's current configuration before beginning a new configuration.
State the number of the key to be programmed (see location below) by pressing GOTO or by selecting
the next or previous key.
MODIFY
makes it possible to show the display which groups together all the B functions offered. Press the
soft key corresponding to the list which contains the desired function.
Function list
Choosing CALL B
Alcatel 4200
MMC-STATION SECTION CONFIGURATION OF STATIONS
Choosing ABBNUM B
Choosing ANSWER B
Choosing DIV B
Choosing OPTION B
Digits Dialling Putting dialling into a memory USR/INS Digits (22 max) to be sent in MF
MsgLed Text Mail (M) Access to mailing INS
jDTMF Send MF code Send MF code USR/INS Digits (22 max) to be sent in MF
Alcatel 4200
MMC-STATION SECTION CONFIGURATION OF STATIONS
Choosing RESOU B
NOTE : This paragraph only describes the principal parameters which are able to be defined
according to the role assigned to the key ; other parameters are possible (trunk number if RSD
or RSB, station sub-address if RSL, type of monitoring key and number of the monitoring
key if RSP).
V Dynamic routing
This sub-function is only offered for MACRO1, RGI, RGM, RSL, RSD, RSB and RSP keys. DYNROU makes
it possible to define the data necessary for the dynamic routing of calls managed by the key concerned.
Press MODIFY :
- TP1
: by pressing successively on this key, define whether time-out 1 is active (TP1) or inactive
(tp1).
- TP2
: by pressing successively on this key, define whether time-out 2 is active (TP2) or inactive
(tp2).
- or GENBEL : by pressing successively on this key, define whether the system should route the call
ATTEND
to the operator and/or to the general call device after the non-answer time-out TP2 (active =ATTD
or GBEL ; inactive = attd or gbel).
- DIV makes it possible to authorize (DIV) or not (div) forwarding for this key.
- NUMBER makes it possible to define a destination station (or group) for the dynamic routing in the case
of no answer after a time-out TP1 (12 seconds by default).
V Type of call
This sub-function is only offered for RGI, RGO and RGM keys.
CALTYP
makes it possible to determine the type of calls managed by the key concerned.
This sub-function is only offered for RSL, RSD and SUP keys. NUMBER makes it possible to define the direc
tory number of the associated station.
Press DYNROU
A .
EXTERN
and LOCAL make it possible to define whether the dynamic routing criteria (time-outs 1 and 2,
destinations) are active for each type of call (external or local) or not :
- NUMBER
makes it possible to define a destination station (or group) for the dynamic routing in the case
of no answer after a time-out TP1 (12 seconds by default).
- TP1
: by pressing successively on this key, define whether time-out 1 is active (TP1) or inactive
(tp1).
- TP2
: by pressing successively on this key, define whether time-out 2 is active (TP2) or inactive
(tp2).
- ATTEND
or GENBEL : by pressing successively on this key, define whether the system should route the call
to the operator and/or to the general call device after the non-answer time-out TP2 (active = ATTD
or GBEL ; inactive = attd or gbel).
- DIV
makes it possible to authorize (DIV) or not (div) forwarding for this key.
TMOUT1
and TMOUT2 make it possible to define the time-outs in tenths of a second. By default =
12 seconds.
Alcatel 4200
MMC-STATION SECTION CONFIGURATION OF STATIONS
V24PRO
A (when the selected station corresponds to a V24 interface) makes it possible to define the
characteristics for the V24 option installed on a 4012 or 4034 station or on a 4088 adapter.
PROT
: by pressing successively on this key, choose the transmission protocol : 108/1, 108/2, Hayes or
Dec. auto (Hayes by default).
FLOW
: by pressing successively on this key, choose the type of flow control : XON/XOFF, RTS/CTS or
without (XON/XOFF by default).
SPEED
: by pressing successively on this key, choose the transmission speed : 1200, 2400, 4800, 9600,
19200 or 57600 bits/s (9600 bits/s by default).
SIGBIT
: by pressing successively on this key, choose the number of significant bits : 7 or 8 (8 by default).
PARITY
: by pressing successively on this key, choose the parity : 0, 1, even, uneven or no parity (no parity
by default).
STPBIT
: by pressing successively on this key, choose the number of stop bits : 1 or 2 (1 by default).
SELFWD
A makes it possible to define the parameters (calling party identification, forwarding destina
tion, ...) for the selective forwarding (2 lists of 10 callers maximum).
The indication of the remote service used is only significant for S0 stations ; for all other types of stations,
the remote service "Voice" is allocated.
STATE
: by pressing successively on this key, define the state of the forwarding for the list concerned :
active (active), inactive (inact) or enable (enabl) ; for enable, pressing a SELFWD programmed key acti
vates the forwarding if it was defined as "habilité" and vice versa, an inactive forwarding the rest.
MODE
: by pressing successively on this key, define the forwarding mode for the list concerned :
- positive : calls from callers contained in this list are forwarded to the programmed destination.
- negative : calls from callers contained in this list are not forwarded and reach the called station as
normal.
DELALL
makes it possible to delete all data relative to the list concerned.
TARGET
makes it possible to define the destination (internal or external) for the selective forwarding.
CALLER
makes it possible to define callers' numbers (26 characters max) for the list concerned ;
DELLALL makes it possible to delete all callers' numbers from the list.
BOOKCF
A (when the selected station is an S0 station) makes it possible to define immediate forwarding,
forwarding on busy and forwarding on no answer for S0 stations.
SERVIC
: by pressing successively on this key, choose the remote service (see list page 17).
IMMED
, BUSY , NOREP make it possible to define the internal or external destination for the selected type of
forwarding.
CANCCF
A (when the selected station is an S0 station) makes it possible to see and cancel the program
ming for S0 station forwarding. Press DELETE
or DELLALL
.
WIRLSS
A (when the selected station is a DECT) makes it possible to define the parameters for DECT
stations.
PERM
makes it possible to choose permanent registration to the system.
VISIT
makes it possible to choose temporary registration to the system ; enter the date on which the
mobile is to be automatically disconnected from the system and validate.
IPUI
I makes it possible to modify the IPUI value of the DECT station ; enter 14 octal digits and validate.
DISPL
makes it possible to validate or inhibit a GAP DECT display.
WIRLSS
A (when the selected number is a DECT access) makes it possible to register a new DECT station
(UA or GAP).
FEATUR
A makes it possible to authorize the use of features said to be "monitored" (subject to rights).
Alcatel 4200
MMC-STATION SECTION CONFIGURATION OF STATIONS
PAGING - PAGING
PAGING
A makes it possible to define the number of the paging receiver for the station concerned.
Only calls compatible with the services programmed are accepted for both outgoing and incoming. All
other types of call are rejected and not presented when incoming.
For non S0 stations, only service 1 is to be defined.
Alcatel 4200
MMC-STATION SECTION CONFIGURATION OF STATIONS