You are on page 1of 4

E103: PROJECTILE MOTION

CRUZ, Jefferson G.
12jheff@gmail.com / 2013110564 / CEM-3
PHY10L-B2 Group 5

PROGRAM OUTCOME A. Ability to apply knowledge


of mathematics, science and engineering

Data Sheet / Computation (10)

PROGRAM OUTCOME G. Ability to communicate


effectively

Presentation / Graph, Figures and


Tables (10)

PROGRAM OUTCOME B. Ability to design and


conduct experiments, as well as to analyze and
interpret data
Results and Discussion (15)

Conclusion / Error Analysis (15)

PROGRAM OUTCOME K. Ability to use the


techniques, skills, and modern engineering tools
necessary for engineering practice
Application (10)

Performance

TOTAL

November 22, 2017


E103: Projectile Motion
Jefferson G. Cruz
(School of Civil, Environmental and Geological Engineering, Mapúa Institute of Technology, Philippines)

Introduction
Projectile Motion is a different kind of motion because it still moves along a straight line but because
of gravity it falls back again to earth after being released into air. Projectile Motion usually travels along a
parabolic path or trajectory. There are many applications of projectile motion including the release of canons,
throwing objects and even long jump from one place to another. The experiment will try to explain principles
regarding projectile motion like the range of projectile, the angle of projectile and the highest point of projectile.
This experiment aims to explain relationship of angle, range, and maximum height to the projectile being
released.

Results and Discussion


In this experiment, projectile motion, we explored and defined projectile motion, first we must consider
the elements and the factors that will contribute and will affect to the entirety of the concept of this 2D case. In
the experiment, the motion of an object within the effect of the gravity is completely determined by acceleration
.

of the gravity. The speed of the launch, and angle of the launcher that provide friction in air is insignificant. The
motion of vertical and of the horizontal can be pull apart and is outlined by the general mo tion equation for the
. .

constant acceleration. The initi al vector components of the velocity are used in the equations.
. . . . . . . . . . . . .

Figure 1. Preparing the launcher Figure 2. Loading the launcher


Figure 3. Measuring the length Figure 4. Doing the experiment

Conclusions

Projectile Motion is a special case of two-dimensional motion. It is special because, while the
projectile is airborne, the only external force on it is that due to gravity. Gravity is the only considered
external force acting on it while an object is airborne. As fired at an angle, it is influenced by its horizontal
inertia and vertical gravity.

In the experiment, it shows that the larger the launch angles, the shorter the range that we get though
it has a higher maximum vertical distance. We calculate the difference in the percentage from initial velocity
where the angle we use is at 0°. Our data also displayed that the larger angle would produce a lesser
difference in percentage which means that the approach is closer to a quadrantile angle, where the angles
forms a line. The bottom line part is in the ground to ground motion projectile, the one thing that we must
considered is to be able to successfully fire the metal ball to the target, is the angle of the launch, since as
what we got in the experiment, the greater the launch angle, the higher the maximum vertical distance and a
shorter range.

References

KhanAcademy https://www.khanacademy.org/science/physics/two-dimensional-motion/two-dimensional-
projectile-mot/a/what-is-2d-projectile-motion
Mapua University - Department of Physics. (Laboratory Manual, General Physics 1. Experiment103
PROJECTILE MOTION)
Phet Interactive simulations https://phet.colorado.edu/en/simulation/projectile-motion

You might also like