Professional Documents
Culture Documents
After Gate by S K Mondal PDF
After Gate by S K Mondal PDF
2. PSUs Exam***
*****For IES*****
***For Conventional***
1. Prepare rigorously 2 to 3 subject of each paper for conventional
Paper-1 Paper-2
1. FM/FMachine 1. SOM
2. HMT 2. Prod/E.Materials
3. Power Plant 3. Industrial
4. Vibrations
***For Objective***
1. Prepare all subjects all topics
2. Focus on theoretical and formula based questions. No need to solve
lengthy numerical problems of previous GATE papers. Main focus will
be on IES previous and IAS previous questions. I have given 12000
objective questions with answer. If you haven’t taken yet collect it from
classmate.
By: S K Mondal
IES Officer (Railway), GATE topper, NTPC ET-2003 batch, 12 year teaching experienced,
Author of Hydro Power Familiarization (NTPC Ltd) E-mail: swapan_mondal_01@yahoo.co.in
Page 2 of 3
Paper-1 Paper-2
1. FM/FMachine 1. SOM
2. Thermodynamics 2. Prod/E.Materials
3. HMT 3. Industrial
4. Power Plant 4. TOM
5. RAC 5. Design
6. IC 6. Computer
Step-II: Read the questions carefully and understand clearly what examiner
wants.
Step-III: Start answering with easiest question. But remember all parts of the
question should be answer in one place means if question no 5 has three parts (a),
(b) and (c). In your Answer sheet first mark 5/(a), 5/(b) and 5/(c) with different
pages assuming that you need that much space to answer that part of the
question. Now you are free to answer 5/(c) first that you find easiest in the paper.
Step-IV: After answering 5/(c) you find that next easiest question is 9/(b). Repeat
step-III and answer 9(b) in that way you proceed.
Step-V: After 2.45 hr. In the middle of all blank pages write P. T. O
Step-VI: for 5 to 10 marks question you don’t need the formula derivation. Do the
formula derivation if a mark for the question is more than 10
Step-VII: Write the meaning of all the symbols used. e.g Mass (m) = 10 kg.
Velocity (v) = 25 m/s etc.
Step-VIII: Write whatever you know about the question. Remember there is part
marking if you write something they will give you some marks
By: S K Mondal
IES Officer (Railway), GATE topper, NTPC ET-2003 batch, 12 year teaching experienced,
Author of Hydro Power Familiarization (NTPC Ltd) E-mail: swapan_mondal_01@yahoo.co.in
Page 3 of 3
2. Write down all formula of mechanical engineering (there are about 750
formulae in mechanical)—repeat it weekly.
3. Practice IES, IAS, GATE previous questions (Only theoretical type and
Formula based) - - No need to practice numerical type.
By: S K Mondal
IES Officer (Railway), GATE topper, NTPC ET-2003 batch, 12 year teaching experienced,
Author of Hydro Power Familiarization (NTPC Ltd) E-mail: swapan_mondal_01@yahoo.co.in