Professional Documents
Culture Documents
OBJECTIVE
To design and study the characteristics of inverting and non-inverting amplifiers.
COMPONENTS REQUIRED
PROCEDURE
NONINVERTING AND INVERTING AMPLIFIER
1. Connect the components as per the given circuit diagram.
2. Switch ON the function generator and CRO.
3. Connect the input from function generator to CRO. Set the amplitude as 2V and
frequency as 1 KHz.
4. Switch ON the power supply.
5. Observe the output waveform using CRO and note down the readings.
6. Observe the output voltage for different values of input voltage and note down the
readings.
7. Compare the experimental output value with the theoretical output voltage calculated
from the formula for inverting amplifier,
𝑹𝒇
𝑽𝒐 = − 𝑽
𝑹𝒊 𝒊
8. Compare the experimental output value with the theoretical output voltage calculated
from the formula for non-inverting amplifier,
𝑹𝒇
𝑽𝒐 = 𝟏 + 𝑽
𝑹𝒊 𝒊
TABULATION
TABULATION
RESULT
The circuit for inverting, non inverting and buffer amplifiers are designed and its characteristics
are studied. The calculated circuit design parameters are,