Professional Documents
Culture Documents
Revion.3
2
BIO MAJESTY System Setup
<Caution>
・ Please install the BM system on the PC specified by JEOL.
・ Do not install any other applications on the PC with BM system. If there is any
pre-installed Virus Protection/Security program on the PC, please uninstall it.
・ Settings in Windows 7 (style, network etc.) for BM system must not be changed.
・ The PC with BM system must not be connected to any network other than the
analyzer.
・ BM system does not support Windows Vista.
・ Keep the CD for Windows 7 that comes as an attachment of the PC with the
factory shipment. You may need this CD in Section 1-3 “Setup FTP”.
3
1. Installing Windows-7
In this chapter, installation procedure for Windows-7 (hereafter ‘Win7’) is described.
Some PC has Win7 pre-installed and some does not, depending on the manufacturer. In both cases,
the settings and inputs are the same, although there are some differences in the installation procedure.
The procedure described in this installation manual is for the PC that has Win7 pre-installed.
2) Windows7 セットアップに従ってセットアップして下さい。
3) PC 名称は下記に従って入力して下さい。.
PC Name : BMOP
PC description : BM Series Operation Console
セットアップ完了です。
4
1‐3. Installation Steps 2 (Advanced Settings)
After all the steps in Installation Steps 1 are completed, Win7 will be started up.
Click ‘BMUSER’ in the log-in window to log in
デスクトップ画面を右クリックし、Personalize を選択してください。
5
1.3.2. 電源設定
スクリーンセーバの設定ボタン(1.3.1 B 参照)をクリックし、電源管理の変更をクリックして下さい。
7
1.3.3. 解像度の設定
デスクトップ画面を右クリックし、Screen resolution を選択してください。
8
設定後は詳細設定画面、画面の解像度設定で OK をクリックし、設定を完了してください。
9
1.3.4. コントロールパネルの表示形式を変更する
Select ‘Start Menu’ -> ‘Control Panel’ .
右上の [View by:] (表示形式)を [Category] に設定します。
1.3.5. パスワードの有効期間を無期限にする
Select ‘Control Panel’ -> ‘System and Security’ -> ’Administrative Tools’.
10
左側のペインのツリーから ‘Security Settings’ -> ‘Account Policies’ -> ’Password Policy’を選択し、
右側のペインに表示された'Maximum Password age'をダブルクリックします。
11
Registered user information is as follows:
User Name Password Account
BMUSER bmuser Administrator
A002 a002 Administrator
上記を参考にして A002 アカウントを作成します。
A002 のパスワードを設定して下さい。
12
A002 の設定は終了です。
[Manage another account]をクリックし、元の画面にもどります。BMUSER アカウントの作成、
または BMUSER アカウントのパスワードが設定されていない場合は A002 アカウントを作成し
た同様の要領で BMUSER アカウントの設定を行ってください。
次に BMUSER アカウントの詳細設定を編集します。Go to the main User Accounts page を選択
して下さい。
13
に設定して下さい。
[Yes]を選択すると UAC
設定を変更し[OK]をクリックすると、下記のポップアップが出現します。
の設定は反映されます。[X]で画面を閉じてください。
14
1.3.7. Change the Task Bar and Start Menu.
Select ‘Start Menu’ -> ‘Control Panel’->’Appearance and Personalization’->
'Taskbar and Start Menu' .
下記と同様の設定に変更し[OK]をクリックして下さい。
15
1.3.8. Set up the Network Settings.
Select ‘Start Menu’ -> ‘Control Panel’->Network and Internet->Network and Sharing Center.
[Change adapter settings]をクリックしてネットワーク接続画面で[Local Area Connection]を
右クリックし[Properties]を選択して下さい。
下図の通りにチェックを外して下さい(QoS,TCO/Ipv6,Link-Layer)。
16
for BM6010/C
Obtain an IP address automatically: Do not check
Static IP address : 172.16.255.1
Subnet mask : 255.255.0.0
Default Gateway : Do not enter
Obtain DNS Server address automatically: Do not check
Preferred DNS Server : 172.16.255.1
Alternate DNS Server : Do not enter
Display [TCP/IP Advanced Setting] window in [Advanced]. Select ‘DNS’ tag and uncheck
“Register this connection’s addresses in DNS” and click [OK
17
1.3.9. Set up FTP Settings.
Select ‘Start Menu’ -> ‘Control Panel’.
Select ‘Programs’->‘Programs and Features’ in the Control Panel’ and select [Turn Windows
features on or off].
18
Select ‘Start Menu’ -> ‘Control Panel’.
Select ‘System and Security’->’Administrative Tools’->Internet Information Service(IIS)Manager.
下図の様に BMOP を右クリックし[Add FTP Site…]を選択して下さい
19
下図と同様の設定にしてください。設定後[Next]をクリック。
下図と同様の設定にしてください。設定後[Finish]をクリック。
20
1.3.10. Set up Services
Select [Start Menu] -> [Control Panel].
Select [System and Security]->[Administrative Tools]->[Services]
Click ‘DHCP Client’ to open the properties. Configure the settings as shown below.
Click [OK] to complete.
・ Select ‘Disabled’ for Startup type.
・ Select ‘Stop’ for Service Status. Service Status becomes ‘Stopped’.
Select [Computer Name] tag. Enter ‘BM Operation Console’ for Computer description.
Then click ‘Change’ button to change work group.
Enter ‘BMUSER’ for work group and click [OK] to exit.
22
When the dialog box prompts you ‘You must restart your computer to apply these changes’,
click [OK] button.
When prompted ‘You must restart your computer to apply these changes’, click ‘Restart Now’
button. The software is rebooted. Wait for a while.
23
1.3.12. Automatic Login
Automatic Login Setting is configured using Registry Editor.
スタートボタンを押し、’Search programs and files’ に[regedit]と入力し、検索結果の regedit
をダブルクリックして下さい。
Add the following keys using [Edit], [New], and [String Value] from the menu in
HKEY_LOCAL_MACHINE / SOFTWARE / Microsoft / WindowsNT / CurrentVersion / Winlogon
If there is already registered key, please set up the value.
Select a value -> Right-click. -> Modify-> Enter the value data -> OK.
When setup is completed, exit the Registry Editor and reboot the PC.
24
1.3.13. Set up Securities
Select ‘Start Menu’ -> ‘Control Panel’.
Access ‘System and Security’ to open ‘Windows FireWall’.
[Turn Windows Firewall on or off]をクリック。
下図と同様に設定して下さい。OK を押してください。
25
[Advanced settings]をクリックして下さい。
Windows Firewall Properties をクリックし[Domain Profile]タブで Firewall state を Off にして下さい。
OK をクリックし画面を[X]を押して閉じてください。
次に[Action Center]をクリックし[Change Action Center settings]をクリック。
26
次の図に示すように、すべてのチェックをはずし、OK をクリックしてください。設定は終了で
す[x]で画面を閉じてください。
27
2. Settings related to the system
2‐1. Performance Settings
1. Select ‘Start Menu’ -> ‘Control Panel’. Access ‘System and Security’ to open ‘System’.
[Advanced System settings]をクリックして下さい。
2.[Advanced]タグを選択し[Performance]の[Settings…]をクリックして下さい。
下記に従ってパフォーマンスオプションの設定を行ってください。
◆Select ‘Visual Effects’ tag and select ‘Adjust for best performance’ button, then click [OK].
◆Select ‘Advanced’ tag and [Background services]を選択して下さい。
◆ [OK]をクリック。
◆
3. Open ‘Start and Recovery’ settings in ‘Advanced’ tag.
図に従って設定し[OK]をクリックして下さい。
28
4. [System Protection]にタグを変更し、[Configure]をクリックし、下記に従ってください。
下図の様に[Turn off system protection]を選択して下さい。
29
2‐2. Disable Automatic Time Synchronizing
Open ‘Control Panel’ -> ‘Clock,Language,and Region ->Open ‘Date and Time’.
[Date and Time]のタグで日付と時間を確認し、誤っている場合は下図に従って調整。
The icons that should remain on the desk top are “Computer”, “Network” and “Recycle Bin”.
OK
32
2‐6. Set up Explorer
1. Select ‘Start’-> ‘Control Panel’ -> ‘Appearance and Personalization’-> ‘Folder Options’.
Select ‘View’ tag and set it up as shown below. Click [OK] to finish.
33
3. System Program Installation
BM series has a CD-ROM attachment for system program installation when they are shipped.(Hereafter
‘System Disk’.)
This System Disk has all the programs, other than OS programs, required for operating the system as
well as the system parameters that are unique to every system when it is adjusted at the manufacturer.
Since these parameters are unique to each system, the System Disk attached to the system must be
installed before starting system operations.
Note:
oooo indicates the system series name.
x.xx indicates the version no.
yy indicates the revision no.
34
3‐2. Installing the programs with Installation Wizard
The following steps are based on BM 6010/C.
1. Run SETUP.EXE in the System Disk. (If AUTORUN is set, SETUP.EXE will be automatically run after
inserting the CD.))
35
5. After installation, the screen returns to the following window.
Click ‘Exit’ button by the mouse.
36
4. Set up for SleepITF2
4‐1. Preparation
PC をシャットダウンさせます。
PC の PCI バスに SleepITF2 board を取り付けます。
PC を起動させます。
起動後、画面右下に「Device driver software was not successfully installed」のメッセージが
表示される場合がありますが、これは無視します。
37
[Device Manager]画面のツリーの中から、'Other PCI Bridge Device' をダブルクリックします。
38
[Browse...] ボタンをクリックします。
フォルダ選択画面にて以下のフォルダを指定して[OK]ボタンをクリックします。
C:¥BIOMJ¥DRIVERS¥PCIDRV¥WIN2KXP
[Next]ボタンをクリックすると、デバイスドライバーのインストールが始まります。
インストールには数分かかります。
39
インストール完了画面が表示されたら[Close]ボタンを押して閉じます。
40
Windows のエクスプローラにて以下のフォルダを開きます。
C:¥BIOMJ¥DRIVERS¥PCIDRV
"SETUPXPE.BAT"をダブルクリックして実行します。
コマンドプロンプト(黒い画面)に
' Please select the board type.(1:SLEEP ITF 2:SLEEP ITF2) > '
と表示されるので、数字の 2 を入力し、ENTER キーを押下します。
41
4‐3. Testing applications
テストアプリケーションを使用して SleepITF2 ボードの動作確認を実施します。
Windows のエクスプローラにて C:¥BIOMJ¥TOOL¥SleepItfTest.exe をダブルクリックして
以下の画面を起動させます。
以下の動作を確認して下さい。
No. 動作 確認項目
1 [Continuation]ボタンを押す 音が鳴ること
2 [Buzzer Off]ボタンを押す 音が止まること
3 [Interval]ボタンを押す 音が鳴ること
4 [Buzzer Off]ボタンを押す 音が止まること
5 [0 second later] に 5 を入力し、 5 秒 後 に [Status] が [ON] か ら
[Power supply off] ボタンを押す [OFF]に変わること
6 [Power supply on] ボタンを押す 5 秒 後 に [Status] が [OFF] か ら
[ON]に変わること
42