Professional Documents
Culture Documents
Accessories
Accessories C
At RDT we have many accessory compo- factured, the Kelly is able to perform this
nents to compliment our lines of tubular function over a prolonged period of time.
goods. We manufacture all our accesso- 16"
ries with precision care and a strict adher- For uniform toughness and durability all
ence to all our quality control measures. Rotary Kellies manufactured by RDT are Top upset
heat treated along the entire length of the with left-
pipe. One of the main features and bene- handed
Rotary Kelly fits for utilizing an RDT Kelly is that we ma-
A
connection
RDT manufactures the Rotary Kelly with one of two basic configurations
Bottom
– Square or Hexagonal. upset
with right-
The Square Kelly is available in three standard lengths: handed
connection
• 40 feet (12.2m) overall length with a 37 foot (11.3m) working space
• 46 feet (14.0m) overall length with a 43 foot (13.1m) working space
• 54 feet (16.5m) overall length with a 51 foot (15.5m) working space 20"
D
Specification – Square Kelly
Square
Top Upset Bottom Upset Drive Section Kelly
Available Wt. of
Nom. Bore Across Across
Lengths OD OD 40 ft.
Size API Box (E) Corners Flats
(A) (C) Right-hand (D) Length
Left-hand (F) (G)
Conn.
Conn.
(in.) (ft.) (in.) (in.) (in.) (in.) (in.) (lb.)
6 7 1 1,080
3 40, 46 NC 31 (2 4 or 3.875 3
4 5 2* 980
6 7
3 40, 46 NC 38 (3 4 2 4.437 3 1,320
4 5
NC 46 (4 IF) 6-6
4 40, 46, 54 6 7 2 5.500 4 1,820
NC 50 (4 6
*Not an API standard
Rotary Kelly
C
The Hexagonal Kelly is available in three standard lengths:
• 40 feet (12.2m) overall length with a 37 foot (11.3m) working space 16"
• 46 feet (14.0m) overall length with a 43 foot (13.1m) working space
• 54 feet (16.5m) overall length with a 51 foot (15.5m) working space
Top upset
with left-
Other sizes are available through special order. handed
connection
20"
Hexagonal
Kelly
Rotary and Crossover Subs
There are two primary applications for using Rotary Subs. The most common use
would be to cross over from one connection size to another. It can also be used as a
disposable component for extending the life of more expensive drill stem products.
All of our Rotary Subs are available with box x pin, box x box or pin x pin connec-
tions. To minimize galling on the initial makeup, all our connections are protected by a
phosphate surface coating. When subs are ordered to conform to API specifications,
RDT is authorized to apply the API monogram.
RDT offers three different types of Rotary Subs for you to choose from:
Straight OD Sub
This sub is used to connect drill stem components that have a similar outside diameter.
The drill bit, downhole tools, Heavy Weight Drill Pipe and drill pipe can be crossed over
using a Straight OD Sub.
Saver Sub
This sub would be used to extend the life of the kelly by taking the connection wear
each time it is made up to a drill stem component. The Saver Sub connection is
sacrificed because it can be easily repaired or inexpensively replaced. The Saver Sub
can be equipped with a rubber protector to reduce BOP equipment and casing wear
resulting from contact damage with the lower kelly connection.
Box x box Box x pin Pin x pin Box x box Pin x box Box x box Box x pin Pin x pin Box x pin Box x pin
Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10
Rotary and Crossover Subs
Bit Sub Top Drive Sub Standard Top Drive Sub:
At RDT we offer a complete line of To reduce repair and maintenance costs, • Manufactured to meet/exceed API
Bit Subs. Bit Subs are manufactured the Top Drive Subs serve as the sacrificial Spec 7-1
from materials that are heat treated element between the drillstring and the • Manufactured using 4145H alloy steel
to drill collar specifications. To mini- top drive. In the event that the lower pin material
mize galling on the initial make-up, our threads become galled or damaged, the Premium Top Drive Sub:
connections are protected by a phosphate Top Drive Sub can easily be repaired or re- • Manufactured to meet impact values
surface coating. RDT is authorized to placed. We manufacture all our Top Drive specified in API Spec 8-A or B-C
apply the API monogram to those Bit Subs Subs from selected bars of alloy steel. Our • Manufactured using double heat treat-
ordered that conform to API standards. heat treating process is applied to each of ed 4145H alloy steel material or
these tools to provide the added strength • To obtain higher impact values manu-
Available size ranges: and toughness required for them to carry factured from 4330V forged steel or bar
3-1/8 inch – 11 inch OD the entire weight of the drillstring. and double heat treated
26 inches – 48 inches in length
At RDT we offer two different versions of All RDT Top Drive Subs are he at treated
Lift Sub Top Drive Subs, Standard and Premium, to meet or exceed API specifications for
A Lift Sub enables the safe, efficient han- enabling us to meet specific criteria’s that drill pipe tool joint mechanical properties.
dling of straight OD tubulars such as drill are requested by our customers. Each tool comes standard with precision
collars, shock tools, jars, directional equip- machined API connections. Should you
ment and other tools by using the drill require proprietary connections we have
pipe elevators. licensed vendors to perform that type of
machining. All our Top Drive Subs are se-
Top Drive Sub rialized for complete material traceability.
Lift Sub
Specification – Top Drive Sub
Lower Pin Conn.
OD ID Upper Pin Lower Pin Tensile
Torsional Yield
Conn. Size Conn. Size Yield
(in.) (in.) (lbs.) (ft-lbs)
8 4 7 REG. 6 FH 2,296,000 118,000
Specialty Subs
As with all our products, RDT continues to come up with innovative ways to meet our
customer’s needs and requirements. This is also true when it comes to manufactur-
ing our subs. Within our Specialty Sub category we are able to offer the following:
Pressed Steel light-duty protectors – These protectors are suitable for shipping and
storing threaded drill stem components only.
Plastic light-duty protectors – These protectors are suitable for shipping and
storing threaded drill stem components only.
Certified Cast Steel Thread Protector – When you want the best protection pos-
sible for your tubular goods, RDT recommends our Certified Cast Steel Thread
Protectors (CCSTP) with lifting bail. Offering the ultimate in thread protection
by including certified lifting capacities, the CCSTP ensures the safe handling of
your tubular products during manufacturing, shipping and storage at the rig site.
Suitable for picking up and laying down a drill collar with the catline, each tool
is manufactured from steel castings with heavy duty lifting bails. Proof tested
to 300 percent of the maximum anticipated load, each lifting bail is capable of
picking up one drill collar within the recommended diameter for the type and
size of the connection on the CCSTP. Continuing our focus on providing a quality
product, all the threads and shoulders on these tools are precision machined.
Each CCSTP is load tested and inspected prior to sale.
Note: Due to the rough nature in which drill collars are handled, RDT
recommends frequent inspection to ensure the bail is not cracked and
that proper makeup to the connection is possible.
Drilling Stabilizers
At RDT we continue to focus on our customer’s needs when it comes to ensuring the
quality of the hole being drilled. That is why we offer Drilling Stabilizers that will
mechanically stabilize the BHA in the borehole in order to avoid unintentional
sidetracking and vibrations. RDT Drilling Stabilizers are designed to increase rate
of penetration and control deviation which will reduce your drilling costs per foot.
Our Drilling Stabilizers are composed of a hollow cylindrical body and stabilizing
blades, both manufactured from AISI 4145H modified heat-treated steel for a wide
variety of configurations and hole sizes. The blades for our Stabilizers can be either
straight or spiraled and are hardfaced for wear resistance.
Due to various drilling conditions, RDT offers two different types of Stabilizers for the
applications you may need.
RDT offers several different types of hardfacing options for our Stabilizers. Please
contact your RDT representative to review which of our hardfacing options would be Integral
the best selection for your specific drilling applications. Blade Stabilizer
Integral Blade Stabilizers-Dimensional Data
Hole Size Fishing Neck Bore Fishing Neck Overall Min. Crown Blade Width Approx. Wt.
(in) (Dia. in) (Dia. in) (Lgth. in) (Lgth. in) (Lgth. in) (in) (lbs)
4
4 3 24
4 - 1 - 65 12 1 150
4 3 28
4
5
5 4 1 30 78 14 2 260
6
6
6
6 4 2 30 78 14 2 375
6
6
7
7
7 6
8 - 2 32 85 16 2 625
8 6
8
8
9
9 7 850 - 915
- 2 28 82 16 2 -
9
9 7 985
10
11
12 8 1150
12 - 2 30 84 16 2 -
13 10 1830
14
16
17
18
20 8 2 16 1390
22 - - 33 93 - 2 -
24 10 3 18 2075
26
*All of our Stabilizers can be manufactured to meet customer specifications.
Drill Pipe Pup Joints
The Drill Pipe Pup Joint is an important drill stem component for special drilling or
testing operations. Pup Joints are used to adjust the height of full length tubing or E
casing strings. This short drill pipe section is used to locate the top box of the drillstring
at a specified distance from the rig floor and to adjust the depth of downhole tools.
RDT’s pup joints are manufactured using round bar from AISI-4145 H Material. Our Pup
Joints are available with right or left hand threads. All of our Pup Joints are serialized
and you receive documents recording every detail of raw material, testing, manufac- 180
turing processes and quality control measures.
D
350
I.D.
C
Drill Pipe
Pup Joints
Drill Pipe Pup Joints
5 (4 F.H.) 10 286
15 394
20 502