Announcing Workshop on Structural Analysis using SAP2000 To be conducted at IIT Kanpur during March 18-19, 2015
WORKSHOP OBJECTIVES 14. Setting up load cases for analysis. Overview of
The aim of the workshop is to provide the analysis available in SAP2000 viz. Linear/Nonlinear participants an overview on Structural cases and types such as static, multistep static, Analysis using SAP2000. influence lines, buckling, modal, time history, steady PARTICIPANTS state, hyperstatic etc. The workshop is designed for 15. Simple examples of each type of analysis. Non‐ • Civil Engineers engaged in planning, linear analysis to account for contact problems and design, or construction of structures. geometric non‐linearity like P‐Delta analysis, Staged • Senior professionals responsible for analysis etc. directing these activities 16. Non‐linear Pushover analysis. An overview, WORKSHOP CONTENTS objectives and strategies. Detailed example of pushover analysis, interpretation of results and 1. Modelling of a structure: an overview, drawing the inferences. Objectives and strategies 17 Discrete non‐linear elements. The usefulness of 2. Analysis Flavours: Linear, Non‐linear such non‐linear elements. Concept of energy 3. Introduction to SAP2000: Its history and current dissipation. Analysis with dampers and base isolators. capabilities. 18. Base Isolation basics. 4. SAP2000 GUI, Modelling overview from start to 19. Design of concrete frame, shell elements in finish by a simple example SAP2000 5. Object based modelling: Major differences from 20. Design of Steel frame elements in SAP2000. element based modelling. Good work methods WORKSHOP FACULTY 6. Modelling Objects of SAP2000 viz, point, line, The workshop will be conducted by area, volume and link objects. Polymorphism of • Prof. Durgesh C. Rai, IIT Kanpur , objects, • Mr. Rajiv Sharma, CSI New Delhi and 7. Point Object: The most basic object, its • Mr. Hemant Kumar, CSI New Delhi. usefulness and modelling options. When to use multiple points at same location, VENUE 8. Constraints and their usefulness, Edge The workshop will be conducted at IIT Kanpur. Constraints and their role in analysis REGISTRATION 9. Line objects: Utility of line objects, Modelling The workshop fee is Rs. 15,000/- (Rupees Fifteen scope viz, truss, 3D beam, cable, tendon, load Thousand Only) per participant. It includes application, Assignment options for changing the workshop material, lunch, and tea breaks. The character of line object fee is payable in advance by a crossed draft in 10. Area objects: Utility of Area Objects, Modelling favour of Workshop on SAP, IIT Kanpur or scope viz. membrane, plate, shells, Uniform shell, through credit card by December 31, 2014. layered shell, load application, Other Assignment Limited twin-sharing accommodation is options of area objects available on first-come first-served basis at IITK 11. Other area objects: Plane and solid area Guest House on payment. objects their usefulness and class of problems Interested persons should send the which can be handled enclosed Registration Form to: 12. Volume objects: Utility of volume objects, Modelling scope, load application and other Cdr (Retd.) Suresh Ailawadi assignment options Department of Civil Engineering 13. Link Objects: Utility of Link Objects, Modelling Indian Institute of Technology Kanpur scope, detailed treatment of linear and non‐linear Kanpur - 208 016 link objects Phone: (0512) 2597749 Email: asuresh@iitk.ac.in