Professional Documents
Culture Documents
Continuous and Discrete Time Signals and Systems Mandal Asif Solutions Chap13 PDF
Continuous and Discrete Time Signals and Systems Mandal Asif Solutions Chap13 PDF
Problem 13.1
(i) x1[k ] = 0.5 k +1 u[k + 5]
1
By definition, 0.5 k u[k ] ←⎯→
Z
ROC : z > 0.5
1 − 0.5 z −1
z5
Using the time shifting property, 0.5 k +5 u[k + 5] ←⎯→
Z
ROC : z > 0.5 , z ≠ ∞
1 − 0.5 z −1
0.5 −4 z 5
which implies that 0.5 k +1 u[k + 5] ←⎯→
Z
ROC : z > 0.5 , z ≠ ∞ .
1 − 0.5 z −1
(ii) x 2 [k ] = (k + 2)0.5
k
1
By definition, 0.5 k u[k ] ←⎯→
Z
ROC : z > 0.5
1 − 0.5 z −1
1
and − 0.5 −k u[−k − 1] = −2 k u[−k − 1] ←⎯→
Z
ROC : z < 2.
1 − 2 z −1
Applying the linearity property,
( )(
dz 1 − 0.5 z −1 1 − 2 z −1 )
We have just proved that
3z −1
2 × 0.5 ←⎯→ ROC : 0.5 < z < 2.
Zk
(1 − 0.5z ) (1 − 2 z )
−1 −1
(1 − 0.5z ) (1 − 2 z )
−1 −1
( )(
dz 1 − 0.5 z −1 1 − 2 z −1 )
2 Chapter 13
k +2
(iii) x3 [k ] = k + 2 × 0.5
⎧ k × 0.5 k k ≥0
=⎨ = k × 0.5 k U [k ] − k × 2 k U [− k − 1] .
k
Consider k 0 .5 −k
⎩ − k × 0 .5 k <0
0.5 z −1
Now, k × 0.5 k U [k ] ←⎯→
Z
ROC : z > 0.5
(1 − 0.5z ) −1 2
2 z −1
and − k × 2 k U [− k − 1] ←⎯→
Z
ROC : z < 2
(1 − 2 z ) −1 2
0 . 5 z −1 2 z −1
k 0.5 ←⎯→ + ROC : 0.5 < z < 2 .
Z k
which implies that
(1 − 0.5 z ) (1 − 2 z )
−1 2 −1 2
3k +1
or, x4 [k ] = [cos( π3 k ) − sin( π3 k )]u[−k + 5]
2
Problem 13.2
(i) The sequence can be expressed as
x1[k ] = δ[k − 10] + δ[k − 11] + 2δ[ k − 12] + 2δ[k − 15],
Solutions 3
k =0 k =−∞
∞
= 9∑ (3 z ) − k + z −1 + 2 z −2 + 3 z −3 + 4 z −4 z ≠0
k =0
x3 [k ] = sin( π5k + π3 )u[k ] = ⎡⎣sin( π5k ) cos( π3 ) + cos( π5k ) sin( π3 ) ⎤⎦ u[k ] = ⎡⎣ 12 sin( π5k ) + 2
3
cos( π5k ) ⎤⎦ u[k ]
X 3 ( z) = {⎡⎣ 1
2 sin( π5k ) + 2
3
}
cos( π5k ) ⎤⎦ u[k ] = 1
2 {[sin( π )] u[k ]} +
5
k
2
3
{[cos( π )] u[k ]}
5
k
sin( π5 ) z −1 1 − cos( π5 ) z −1
= 1
+ 3
ROC: z > 1
1 − 2 cos( π5 ) z −1 + z −2 1 − 2 cos( π5 ) z −1 + z −2
2 2
=
1
2 sin( π5 ) z −1 + 2
3
{1 − cos( π
5 ) z −1 }
1 − 2 cos( π5 ) z −1 + z −2
3
+ 12 sin( π5 ) z −1 − 23 cos( π5 ) z −1
= 2
1 − 2 cos( π5 ) z −1 + z −2
0.866 − 0.407 z −1
≈ ROC: z > 1
1 − 1.618 z −1 + z −2
(iv) We know that
1
(0.5e jπ / 5 ) k u[k ] ←⎯
Z
→ ROC : z > 0.5
1 − 0.5e jπ / 5 z −1
1
and (0.5e− jπ / 5 ) k u[k ] ←⎯
Z
→ ROC : z > 0.5
1 − 0.5e − jπ / 5 z −1
Adding the two transform pairs after multiplying respectively with exp(jπ/3) and exp(−jπ/3),
gives
e jπ / 3 e − jπ / 3
e jπ / 3 (0.5e jπ / 5 ) k u[k ] − e − jπ / 3 (0.5e − jπ / 5 ) k u[k ] ←⎯
Z
→ − ROC : z > 0.5
1 − 0.5e jπ / 5 z −1 1 − 0.5e − jπ / 5 z −1
e jπ / 3 e − jπ / 3
or, 2 j × 0.5k sin( π5k + π3 )u[ k ] ←⎯
Z
→ − ROC : z > 0.5 .
1 − 0.5e jπ / 5 z −1 1 − 0.5e − jπ / 5 z −1
(v) By definition
4 Chapter 13
∞ ∞
X 5 ( z ) = ∑ ku[k ]z − k = ∑ kz − k = ( z −z1)2 ROC: z > 1 ▌
k =0 k =0
Problem 13.3
In parts (i)-(vii), the sequences are all causal (right hand sided), and hence the ROC is the outside of the
circle with radius equal to the magnitude of the pole furthermost from the origin in the z-plane.
z
(i) X 1 ( z ) =
z − 0.9 z + 0.2
2
(iii) X 3 ( z ) = z2 + 2
( z − 0.3)( z + 0.4)( z − 0.7)
By partial fraction expansion,
z2 + 2 k1 k2 k3
X 3 ( z) = ≡ + +
( z − 0.3)( z + 0.4)( z − 0.7) z − 0.3 z + 0.4 z − 0.7
⎡ z2 + 2 ⎤ 2.09
k1 = ⎢ ⎥ = = −7.4643
⎣ ( z + 0.4)( z − 0.7) ⎦ z =0.3 −0.28
where
⎡ z2 + 2 ⎤ 2.16
k2 = ⎢ ⎥ = = 2.8052
⎣ ( z − 0.3)( z − 0.7) ⎦ z =−0.4 0.77
⎡ z2 + 2 ⎤ 2.49
k3 = ⎢ ⎥ = = 5.6591
⎣ ( z − 0.3)( z + 0.4) ⎦ z =0.7 0.44
In other words,
z2 + 2 7.4643 2.8052 5.6591 ⎡ 7.4643z 2.8052 z 5.6591z ⎤
X 3 ( z) = =− + + = z −1 ⎢ − + +
( z − 0.3)( z + 0.4)( z − 0.7) z − 0.3 z + 0.4 z − 0.7 ⎣ z − 0.3 z + 0.4 z − 0.7 ⎥⎦
=P( z )
where p[k ] = z −1{P( z )} = [−7.4643 × 0.3k + 2.8052 × (−0.4) k + 5.6591× 0.7 k ]u[k ] .
Therefore,
Solutions 5
x3 [k ] = z −1{z −1 P ( z )} = p[k − 1]
= ⎡⎣ −7.4643 × 0.3k −1 + 2.8052 × (−0.4) k −1 + 5.6591× 0.7 k −1 ⎤⎦ u[k − 1]
= ⎡⎣ −24.881× 0.3k − 7.0130 × (−0.4) k + 8.0844 × 0.7 k ⎤⎦ u[k − 1].
(iv) X 4 ( z ) = z2 + 2
( z − 0.3)( z + 0.4) 2
By partial fraction expansion,
X 4 ( z) z2 + 2 k k2 k3 k4
= ≡ 1+ + +
z z ( z − 0.3)( z + 0.4) 2
z z − 0.3 z + 0.4 ( z + 0.4) 2
where
lim ⎡ z2 + 2 ⎤ 2
k1 = ⎢ × z⎥ = = −41.6667 ,
z → 0 ⎣ z ( z − 0.3)( z + 0.4) 2
⎦ (−0.3)(0.4)
2
lim ⎡d z2 + 2 2⎤ lim ⎡ d z 2 + 2 ⎤
k3 = ⎢ × ( z + 0. 4 ) ⎥ = ⎢ ⎥
z → −0.4 ⎣ dz z ( z − 0.3)( z + 0.4) 2 ⎦ z → −0.4 ⎣ dz z ( z − 0.3) ⎦
lim ⎡ 2z z2 + 2 z2 + 2 ⎤
= ⎢ − 2 − ⎥ = 27.4490
z → −0.4 ⎣ z ( z − 0.3) z ( z − 0.3) z ( z − 0.3) 2 ⎦
k2 k3 k4 z −1
Hence, X 4 ( z ) ≡ k1 + + +
1 − 0.3 z −1 1 + 0.4 z −1 (1 + 0.4 z −1 ) 2
Assuming right hand sequences and taking the inverse z-transform, we get
x4 [k ] = −41.6667δ [k ] + 14.2177 × 0.3k u[ k ] + 27.4490 × (−0.4) k u[k ] − 19.2858k (−0.4)k u[k ]
= −41.6667δ [k ] + ⎡⎣14.2177 × 0.3k − (19.2858k − 27.4490 ) × (−0.4) k ⎤⎦ u[k ]
4 z −1 4z
(v) X 5 ( z ) = −1 −2
= 2
1 − 5z + 6 z z − 5z + 6
By partial fraction expansion,
X 5 ( z) 4 k k
= ≡ 1 + 2
z ( z − 2)( z − 3) z − 2 z − 3
lim ⎡ 4 ⎤ 4
where k1 = ⎢ × ( z − 2)⎥ = = −4 ,
z → 2 ⎣ ( z − 2)( z − 3) ⎦ ( −1)
lim ⎡ 4 ⎤
and k2 = ⎢ × ( z − 3) ⎥ = 4 .
z → 3 ⎣ ( z − 2)( z − 3) ⎦
6 Chapter 13
−4 4
Hence, X 5 ( z) ≡ −1
+
1 − 2z 1 − 3z −1
Assuming right hand sequences and taking the inverse z-transform, we get
4 z −2 4 z −2 2 z 2
(vi) X 6 ( z ) = −1
= −1
= − z −2 × 2 = − z −2 × P ( z )
10 − 6( z + z ) −(6 z − 10 + 6 z ) 3 z − 5z / 3 + 1 3
Applying the linearity and time shifting property of the z-transform, x6 [k ] can be expressed as
z
x6 [k ] = − 23 p[k − 2] where { p[k ]} = P( z ) =
z − 5z / 3 + 1
2
In order to calculate p[ k ] , the transform pair in the Entry 12 of Table 13.1 can be used.
z Az + B
P( z ) = = 2 .
z − 5 z / 3 + 1 z + 2γ z + α 2
2
r= A2α 2 + B 2 − 2 ABγ
α 2 −γ 2
= 1
1− 25 / 36 = 1
11/ 36 ≈ 1.809 , Ω0 = cos −1 ( −αγ ) = cos −1 ( 56 ) = 0.5857 , and
θ = tan −1 ( A α 2 −γ 2
B − Aγ ) = tan −1
( 0) = 0 .
In other words, p[k ] = 1.809sin ( 0.5857 k ) u[ k ] , and the function x6 [k ] can be expressed as
(vii) X 7 ( z ) = 2 z −2 2z
=
(1 − 4 z ) (1 − 2 z ) ( z − 4) 2 ( z − 2)
2
−1 −1
The first 10 sample values of each x[k]’s are shown in MATLAB Program 13.3. ▌
Solutions 7
%part (iii)
k=[0:10] ;
p1 = (0.3).^k ; p2 = (-0.4).^k; p3 = (0.7).^k;
x3 = (-24.881*p1-7.0130*p2+8.0844*p3).*(k>=1) ;
% x3 = [0 1.0 0.60 2.55 1.56 1.3701 0.9043 0.6718 0.4598 0.3276
0.2275]
%part (iv)
k=[0:10] ;
x4 = 14.2177*((0.3).^k) - (19.2858*k-27.4490).*((-0.4).^k);
x4(1) = x4(1)-41.6667;
%x4 = [0, 1, -0.5, 2.33, -1.157, 0.741 -0.351, 0.179, -0.0822, 0.0386, -
0.0173]
%part (v)
k=[0:10] ;
x5 = 4*((3.^k) - (2.^k));
%x5 = 0 4 20 76 260 844 2660 8236 25220 76684 232100
%part (vi)
k=[0:10] ;
x6 = -1.206*sin(0.5857*k-0.5857*2);
x6(1) = x6(1)- x6(1); % =1.11108;
x6(2) = x6(2)- x6(2); % = 0.6666561;
x6
% x6= [0, 0, 0, -0.6666, -1.1111, -1.1851, -0.864, -0.2550, 0.439, 0.9867,
1.2055]
%part (vii)
k=[0:10] ;
x7 = (0.25*k-0.5).*4.^k ;
x7 = x7 + 0.5*(2.^k);
% x7= [0 0 2 20 136 784 4128 20544 98432 459008 2097664]
8 Chapter 13
Problem 13.4
z
(i) X 1 ( z ) =
z − 0.9 z + 0.2
2
Hence,
X 1 (z ) =
z
2
= z −1 + 0.9 z − 2 + 0.61z −3 + 0.369 z −4 + 0.2101z −5 +
z − 0.9 z + 0.2
Taking the inverse transform gives the following values for the first five samples of x1[k]
x1[0] = 0, x1[1] = 1, x1[2] = 0.9, x1[3] = 0.61, x1[4] = 0.369, x1[5] = 0.2101, .
Note that the above values are consistent with those in Problem 13.3(i).
z
(ii) X 2 ( z ) =
z − 2.1z + 0.2
2
Hence,
X 2 (z ) =
z
2
= z −1 + 2.1z − 2 + 4.21z −3 + 8.421z − 4 + 16.8421z −5 +
z − 2.1z + 0.2
Taking the inverse transform gives the following values for the first five samples of x2[k]
Solutions 9
x2 [0] = 0, x2 [1] = 1, x2 [2] = 2.1, x2 [3] = 4.21, x2 [4] = 8.421, x2 [5] = 16.8421, .
Note that the above values are consistent with those in Problem 13.3(ii).
z2 + 2 z2 + 2
(iii) X 3 ( z ) = = 3
( z − 0.3)( z + 0.4)( z − 0.7) z − 0.6 z 2 − 0.19 z + 0.084
By power division, we get
z −1 + 0.6 z −2 + 2.55 z −3 + 1.560 z −4 + 1.3685 z −5
z 2 + 0z + 2
z 3 − 0.6 z 2 − 0.19 z + 0.084
z 2 ∓ 0.6 z ∓ 0.19 ± 0.084 z −1
+ 0.6 z + 2.19 − 0.084 z −1
± 0.6 z ∓ 0.36 ∓ 0.114 z −1 ± 0.048 z −2
+ 2.55 + 0.030 z −1 − 0.048 z − 2
± 2.55 ∓ 1.530 z −1 ∓ 0.4845 z − 2 ± 0.2142 z −3
+ 1.560 z −1 + 0.4325 z − 2 − 0.2142 z −3
± 1.560 z −1 ∓ 0.9360 z − 2 ∓ 0.2964 z −3 ± 0.1310 z − 4
+ 1.3685 z −2 + 0.0822 z −3 − 0.1310 z − 4
± 1.3685 z −2 ∓ 0.8211z −3 ∓ 0.2600 z − 4 ± 0.1150 z −5
Hence,
z2 + 2
X 3 (z ) = = z −1 + 0.6 z −2 + 2.55 z −3 + 1.560 z − 4 + 1.3685 z −5 +
( z − 0.3)( z + 0.4)( z − 0.7)
Taking the inverse transform gives the following values for the first five samples of x3[k]
x3 [0] = 0, x3 [1] = 1, x3 [2] = 0.6, x3 [3] = 2.55, x3 [4] = 1.560, x3 [5] = 1.3685, .
Note that the above values are consistent with those in Problem 13.3(iii).
z2 + 2 z2 + 2
(iv) X 4 (z ) = =
( z − 0.3)( z + 0.4) 2 z 3 + 0.5 z 2 − 0.08 z − 0.048
By power division, we obtain
10 Chapter 13
Note that the above values are consistent with those in Problem 13.3(iv).
4 z −1 4z
(v) X 5 ( z ) = −1 −2
= 2
1 − 5z + 6 z z − 5z + 6
By power division, we get
4 z −1 + 20 z −2 + 76 z −3 + 260 z −4 + 844 z −5
4z
z 2 − 5z + 6
4 z ∓ 20 ± 24 z −1
+ 20 − 24 z −1
± 20 ∓ 100 z −1 ± 120 z − 2
+ 76 z −1 − 120 z − 2
± 76 z −1 ∓ 380 z −2 ± 456 z −3
+ 260 z − 2 − 456 z −3
± 260 z − 2 ∓ 1300 z −3 ± 1560 z − 4
+ 844 z −3 − 1560 z − 4
± 844 z −3 ∓ 4220 z − 4 ± 5064 z −5
Hence,
4 z −1
X 5 (z ) = = 4 z −1 + 20 z −2 + 76 z −3 + 260 z −4 + 844 z −5 +
(1 − 5 z −1 + 6 z − 2 )
Taking the inverse transform gives the following values for the first five samples of x5[k]
x5 [0] = 0, x5 [1] = 4, x5 [2] = 20, x5 [3] = 76, x5 [4] = 260, x5 [5] = 844, .
Solutions 11
Note that the above values are consistent with those in Problem 13.3(v).
4 z −2 − 4 z −1
(vi) X 6 ( z ) = =
10 − 6( z1 + z −1 ) 6 z 2 − 10 z + 6
By power division, we get,
− 23 z −3 − 109 z −4 − 32
27 z
−5
− 70
81 z
−6 62 −7
− 243 z
−4 z −1
6 z − 10 z + 6
2
−4 z −1 + 203 z −2 − 4 z −3
− 203 z −2 + 4 z −3
− 203 z −2 + 100
9 z
−3
− 203 z −4
− 649 z −3 + 203 z −4
− 649 z −3 + 320
27 z
−4
− 649 z −5
−4
− 140
27 z + 649 z −5
−4 −5 −6
− 140
27 z + 700
81 z − 140
27 z
−5 −6
− 124
81 z + 140
27 z
−5 −6 −7
− 124
81 z + 620
243 z + 124
81 z
Hence,
4 z −2 − 4 z −1
X 6 ( z) = = = − 23 z −3 − 109 z −4 − 27
32 −5
z − 70
81 z
−6
− 243
62
z −7 − ......
10 − 6( z1 + z −1 ) 6 z 2 − 10 z + 6
Taking the inverse transform gives the following values for the first five samples of x6 [k ] .
Note that the above values are consistent with those in Problem 13.3(vi).
(vii) X 7 ( z ) = 2 z −2 2z 2z
= = 3
(1 − 4 z ) (1 − 2 z ) ( z − 4) ( z − 2) z − 10 z + 32 z − 32
2 2 2
−1 −1
2 z −2
Hence, X 7 ( z ) = = 2z −2 +20z −3 + 136 z −4 + 784 z −5 + 4128 z −6 + ......
(1 − 4 z ) (1 − 2 z )
−1 2 −1
Taking the inverse transform gives the following values for the first five samples of x7 [k ] .
x7 [0] = 0, x7 [1] = 0, x7 [2] = 2, x7 [3] = 20, x7 [4] = 136, x7 [5] = 784, x7 [6] = 4128, .
Note that the above values are consistent with those in Problem 13.3(vii). ▌
Problem 13.5
(a) We know that (Entry 4 of Table 13.1, with α = α e
± j Ω0
)
1
(αe jΩ0 ) k U [ k ] ←⎯→
Z
ROC : z > α
1 − αe jΩ0 z −1
1
and (αe − jΩ0 ) k U [ k ] ←⎯→
Z
ROC : z > α
1 − αe − jΩ0 z −1
Adding the two transform pairs after multiplying with re jθ and re − jθ , respectively, gives
jθ − jθ re jθ re − jθ
re (α e jΩ0 k
) U [k ] − re (α e − j Ω0 k
) U [k ] ←⎯→ Z
− ROC : z > α
1 − α e jΩ0 z −1 1 − α e − jΩ0 z −1
j ( Ω k +θ ) re jθ (1 − α e − jΩ0 z −1 ) − re − jθ (1 − α e jΩ0 z −1 )
or, rα k ⎡⎣e 0 − e − j ( Ω0 k +θ ) ⎤⎦ u[k ] ←⎯
Z
→ ROC : z > α
(1 − α e jΩ0 z −1 )(1 − α e − jΩ0 z −1 )
r sin θ + α r sin(Ω 0 − θ ) z −1
r × α sin(Ω0 k + θ )u[ k ] ←⎯→
k Z
ROC : z > α
1 − 2α cos Ω0 z −1 + α 2 z −2
or, .
A + Bz −1
=
1 + 2γ z −1 + α 2 z −2
where A = r sin θ , B = α r sin(Ω0 − θ ), γ = −α cos Ω0 . Alternatively, the parameters r , Ω0 , θ can be
expressed in terms of A, B, γ , α as follows (as given in Entry 12).
r= A2α 2 + B 2 − 2 ABγ
2
α −γ 2 , Ω0 = cos −1 ( ) , and θ = tan
−γ
α
−1
( A α 2 −γ 2
B − Aγ ) .
= sin 2 θ + sin 2 (Ω0 ) cos 2 θ + cos 2 (Ω 0 ) sin 2 θ − 2sin(Ω 0 ) cos(Ω 0 ) cos θ sin θ +
2sin(Ω0 ) cos(Ω0 ) sin θ cos θ − 2 cos 2 (Ω0 ) sin 2 θ
= sin 2 θ + sin 2 (Ω0 ) cos 2 θ − cos 2 (Ω 0 ) sin 2 θ
= sin 2 (Ω 0 ) cos 2 θ + sin 2 θ (1 − cos 2 (Ω0 ) )
= sin 2 (Ω 0 ) cos 2 θ + sin 2 θ sin 2 (Ω0 )
= sin 2 (Ω 0 )
cos −1 ( ) = cos (
−γ
α
−1 α cos Ω0
α )=Ω 0
tan −1 ( A α 2 −γ 2
B − Aγ ) = tan ( −1 r sin θ α 2 −α 2 cos 2 Ω0
α r sin( Ω0 −θ ) +α r sin θ cos Ω0 ) = tan −1
( α r sin Ω0 sin θ
α r sin Ω0 cosθ ) = tan −1
( tan θ ) = θ
(b) By comparing X ( z ) = 1 with the above transform pair, we get A = 1, B = 0, γ= −0.5, and α =
1 − z −1 + z −2
1. Substituting the values to compute α, θ, and Ω0, gives
A2α 2 + B 2 − 2 ABγ
r= α2 −γ2
= 1
1− 0.25
= 2
3
,
Ω 0 = cos −1 ( ) = cos
−γ
α
−1
(0.5) = π
3
,
14 Chapter 13
and θ = tan −1 ( A α 2 −γ 2
B − Aγ ) = tan −1
( 0.75
0.5 ) = tan ( 3 ) =
−1 π
3
X ( z) = { 2
3
sin ( π3k + π3 ) u[k ] = } 2
3 {sin ( πk
3 + π3 ) u[k ]}
= 2
3 {sin ( ) cos ( ) u[k ] + cos ( ) sin ( ) u[k ]}
πk
3
π
3
πk
3
π
3
= 2
3 { 1
2 sin ( π3k ) u[k ] + 2
3
cos ( π3k ) u[k ] }
= 1
3 {sin ( ) u[k ]} + {cos ( ) u[k ]}
πk
3
πk
3
−1
sin( π3 ) z 1 − cos( π3 ) z −1
= 1
+ ROC: z > 1
3
1 − 2 cos( π3 ) z −1 + z −2 1 − 2 cos( π3 ) z −1 + z −2
1
⋅ 2
3
z −1 1 − 12 z −1
= 3
+ ROC: z > 1
1 − z −1 + z −2 1 − z −1 + z −2
1
=
1 − z + z −2
−1
Problem 13.6
z sin(Ω 0 )
(a) (i) From pair 9 in Table 13.1, we know {sin(Ω0 k )u[k ]} = ROC: z > 1 .
z − 2 z cos(Ω 0 ) + 1
2
Solutions 15
d
{k sin(Ω0 k )u[k ]} = − z ⎡ {sin(Ω 0 k )u[k ]}⎤⎦ [ using frequency differentiation property]
dz ⎣
d ⎡ z sin(Ω 0 ) ⎤
= −z ⎢ 2 ⎥ ROC: z > 1
dz ⎣ z − 2 z cos(Ω 0 ) + 1 ⎦
( z 2 − 2 z cos(Ω 0 ) + 1) sin(Ω 0 ) − z sin(Ω 0 ) × (2 z − 2 cos(Ω 0 ))
= −z ROC: z > 1
( z 2 − 2 z cos(Ω 0 ) + 1)2
− z 2 sin(Ω 0 ) + sin(Ω 0 ) z sin(Ω 0 )( z 2 − 1)
= −z = ROC: z > 1
( z 2 − 2 z cos(Ω 0 ) + 1)2 ( z 2 − 2 z cos(Ω 0 ) + 1)2
(b) Substituting Ω0 = π3 , θ = π
6 , in pair a(ii) derived above, we get the following pair
z ⎡ z 2 − z − 0.5⎤⎦
= ⎣ 2 ROC: z > 1
( z − z + 1) 2
On the other hand, from pair 9 in Table 13.1, we know the following z-transform pair.
z sin( π3 ) 3
2 z
{sin( π3 k )u[k ]} = = ROC: z > 1 .
z 2 − 2 z cos( π3 ) + 1 z 2 − z + 1
The given z-transform pair can now be proved as follows.
16 Chapter 13
{⎡⎣ 2
3 sin( π3 k ) − k
3
sin( π3 k + π6 ) ⎤⎦ u[k ] }
= 2
3 {sin( π3 k )u[k ]} − 1
3
{k sin( π3 k + π6 )u[k ]}
z 3 z ⎡⎣ z 2 − z − 0.5⎤⎦
= × 2
2
3 − 2 1
× ROC: z > 1
z − z +1 3
( z 2 − z + 1) 2
⎡ 1 z 2 − z − 0.5 ⎤ ⎡ z 2 − z + 1 − ( z 2 − z − 0.5) ⎤
= z
⎢ 2 − 2⎥
= z
⎢ ⎥ ROC: z > 1
⎣ z − z + 1 ( z − z + 1) ⎦ ( z 2 − z + 1) 2
3 2 3
⎣ ⎦
⎡ 1.5 ⎤ 3
2 z
= z
3
=
⎢ ( z 2 − z + 1) 2 ⎥ ( z 2 − z + 1) 2 ROC: z > 1
⎣ ⎦
▌
2 2
1 ⎡ 1 ⎤ ⎡ 1 ⎪⎧ 1 1 ⎪⎫⎤
=⎢ 3 ⎥
=⎢j 3⎨ − 3 ⎬
⎥
( z − z + 1)
2 2
⎣ ( z − 0.5 − j 2
3
)( z − 0.5 + j )
2 ⎦ ⎢⎣ ⎩⎪ z − 0.5 −j 2
3
z − 0.5 + j 2 ⎪ ⎭⎦⎥
2
1⎡ 1 1 ⎤
=− ⎢ − 3 ⎥
3 ⎣ z − 0.5 − j 2
3
z − 0.5 + j 2 ⎦
⎡ ⎤
1 1 1 2
=− ⎢ + − ⎥
(
3 ⎢ z − 0.5 − j
) ( z − 0.5 + j ) ( z − 0.5 − j )( z − 0.5 + j ) ⎥
2 2 3 3
3 3
⎣⎢ 2 2 2 2
⎦⎥
⎡ ⎤
1 1 1 2
=− ⎢ + − ⎥
(
3 ⎢ z − 0.5 − j
) ( z − 0.5 + j ) z 2 − z + 1⎥
2 2
3 3
⎣⎢ 2 2 ⎦⎥
−1 ⎪⎧ 3
2 z ⎪⎫
y[k ] = ⎨ 2 2⎬
⎩⎪ ( z − z + 1) ⎭⎪
⎧ ⎡ ⎤⎫
⎪ 1 ⎢
−1 z z 2z ⎥⎪
= ⎨− + − 2 ⎬
⎢
( ) ( )
z − z + 1⎥ ⎪
2 2
⎪ 2 3 ⎢ z − 0.5 − j 23 z − 0.5 + j 23 ⎥⎦ ⎭
⎩ ⎣
⎡ ⎧ ⎫ ⎧ ⎫⎤
1 ⎢ −1 ⎪ z ⎪ −1 ⎪ z ⎪⎥ 1 2 3
2 z
=− ⎨ ⎬ + ⎨ ⎬ + ×
2 3⎢
2 ⎥
( ) ( ) 3 z − z +1
2 2
⎪ z − 0.5 − j 23 ⎪ ⎪ z − 0.5 + j 23 ⎪⎥ 3
⎢⎣ ⎩ ⎭ ⎩ ⎭⎦
1 ⎡
( ) ( )
⎤ u[k ] + 2 sin( π k )u[k ]
k −1 k −1
=− k 0.5 + j 23 + k 0.5 − j 23
2 3⎣ ⎢ ⎥⎦ 3 3
= ⎡⎣ 23 sin( π3 k ) − k
3
sin( π3 k + π6 ) ⎤⎦ u[k ]
(1 − z + z −2 ) 1 − 2 z −1 + 3 z −2 − 2 z −3 + z −4
−1 2
Problem 13.7
Problem 13.8
Problem 13.9
Using the time shifting property, ( x[k + 1] − x[k ]) = ( x[k + 1]) − ( x[k ]) = ( z − 1) X ( z ) .
N
However, from definition, ( x[k + 1] − x[k ]) = Nlim
→∞
∑ ( x[k + 1] − x[k ]) z − n
k =0
N
Therefore, ( z − 1) X ( z ) = lim
N →∞
∑ ( x[k + 1] − x[k ]) z
k =0
−n
.
= lim x[ N + 1]
N →∞
= lim x[k ]
k →∞
Problem 13.10
z −6
or, (5 6) u[ k − 6] ←⎯→ (5 6)
k Z 6
ROC : z > 5 6 .
1 − (5 / 6) z −1
We know that
1
(2 9) k u[k ] ←⎯
Z
→ ROC : z > 2 9
1 − (2 / 9) z −1
Using the frequency differentiation property,
d 1
k (2 9) k u[k ] ←⎯
Z
→ −z ROC : z > 2 9
dz 1 − (2 / 9) z −1
1
or, k (2 9) k u[k ] ←⎯
Z
→ −z (−1)(−2 / 9)(−1)( z −2 ) ROC : z > 2 9 .
(1 − (2 / 9) z ) −1 2
(2 / 9) z −1
or, k (2 9) k u[k ] ←⎯
Z
→ ROC : z > 2 9 .
(1 − (2 / 9) z ) −1 2
Calculating the z-transform of both sides and applying the time-accumulation property, we get
1 1
k u[k ]←⎯→
z
Z
−1
− ,
z −1 1− z 1 − z −1
z −1
which reduces to k u[k ]←⎯→
Z
,
(1 − z )
−1 2
k u[k ]←⎯→
Z z
, .
(z − 1)2
(iv) x[k] = ek sin(k)u[k].
We know that
1
e(1+ j ) k u[k ] ←⎯
Z
→ (1+ j ) −1
ROC : z > e
1− e z
1
and e(1− j ) k u[k ] ←⎯
Z
→ (1− j ) −1
ROC : z > e
1− e z
Adding the two transform pairs,
1 1
e(1+ j ) k u[k ] + e(1− j ) k u[k ] ←⎯
Z
→ (1+ j ) −1
− (1− j ) −1
ROC : z > e
1− e z 1− e z
1 − e(1− j ) z −1 − 1 + e(1+ j ) z −1
or, 2 j sin(k )ek u[k ] ←⎯
Z
→ ROC : z > e .
(1 − e (1+ j ) −1
z ) (1 − e (1− j ) −1
z )
20 Chapter 13
e sin(1) z −1
or, sin( k )e u[k ] ←⎯→
k Z
ROC : z > e ▌
1 − 2e cos(1) z −1 + e 2 z −2
Problem 13.11
Problem 13.12
(i) Calculating the z-transform of hinv[k] * h[k] = δ[k], yields
Hinv(z) H(z) = 1, or, Hinv(z) = 1/H(z).
The z-transfer function of the LTID system is given by
1
h[k ] = 5− k u[k ] = 0.2k u[k ] ←⎯
Z
→ H ( z) = ROC: z > 0.2 .
1 − 0.2 z −1
The z-transfer function of the inverse LTID system is given by
H inv ( z ) = 1 − 0.2 z −1 ROC: Entire z - plane except z = 0.
Calculating the inverse z-transform, we obtain
hinv [k ] = δ [k ] − 0.2δ [k − 1].
(ii)
(a) Input: x1[k] = u[k]. Using the transform pair
1
u[k ] ←⎯
Z
→ ROC: z > 1 ,
1 − z −1
the z-transform of the output is given by
Solutions 21
1
Y1 ( z ) = X 1 ( z ) H ( z ) = ROC: z > 1 .
(1 − 0.2 z )(1 − z −1 )
−1
z −3
Y3 ( z ) = X 3 ( Z ) H ( z ) = − e5 ROC:0.2 < z < e
(1 − 0.2 z −1 )(1 − ez −1 )
Y3 ( z ) 1
or, = − e5 2 ROC: 0.2 < z < e
z z ( z − 0.2)( z − e)
Calculating the partial fraction expansion, we obtain
⎡ ⎤
Y3 ( z ) ⎢ 9.8737 1.8394 9.9274 0.0537 ⎥
= −e5 ⎢ + − + ⎥ ROC:0.2 < z < e ,
z ⎢ z z2 ( z − 0.2) ( z − e) ⎥
⎢⎣ ROC:|z|>0 ROC:|z|>0 ROC:|z|>0.2 ROC:|z|<e ⎥⎦
⎡ ⎤
⎢ 9.9274 0.0537 ⎥
or, Y3 ( z ) = −e5 ⎢9.8737 + 1.8394 z −1 − + ⎥ .
⎢ ROC:|z|>0 ROC:|z|> 0 (1 − 0.2 z −1 ) (1 − ez −1 ) ⎥
⎣⎢ ROC:|z|>0.2 ⎥
ROC:|z|< e ⎦
22 Chapter 13
Problem 13.13
(i) Taking the z-transform of the input and output, we get
1 z −1
X ( z) = − ROC : z > (1 / 3)
1 − (1 / 3) z −1 1 − (1 / 4) z −1
1 − (5 / 4) z −1 + (1 / 3) z −2
=
(1 − (1/ 3) z ) (1 − (1 / 4) z )
−1 −1
1
and Y ( z) = ROC : z > (1 / 4).
1 − (1 / 4) z −1
The transfer function of the system is given by
Y ( z) 1 − (1 / 3) z −1
H ( z) = = ROC : z > 0.8694
X ( z ) 1 − (5 / 4) z −1 + (1 / 3) z −2
(ii) By expressing the transfer function as
H ( z) z − (1 / 3)
= ROC : z > 0.8694 .
z ( z − 0.8644)( z − 0.3856)
and taking the partial fraction expansion, we get
H ( z) 1.1093 0.1093
=− −
z ( z − 0.8644) ( z − 0.3856)
ROC:| z| >0.8644 ROC:| z| >0.3856
Problem 13.14
(i) We express the transfer function as
Solutions 23
H ( z) z2
= ROC: z > 0.7
z ( z − 0.3)( z − 0.5)( z − 0.7)
where the ROC is selected to obtain a causal LTID system. Taking the partial fraction expansion, we
get
H ( z ) 1.125 6.25 6.125
= − +
z z − 0.3 z − 0.5 z − 0.7
ROC :| z| > 0.3 ROC :| z| > 0.5 ROC :| z | > 0.7
which reduces to
y[k ] = (9.524 − 0.4821× 0.3k + 6.25 × 5k − 14.2917 × 7 k )u[k ]. ▌
Problem 13.15
(i) Using Eq. (13.35), the transfer function of the system (assuming a causal system) is calculated as
follows:
Y (z) 1 − z −2 1 − z −2
H (z) = = = ROC: z > 0.5 .
X ( z) −1
1 + z + 14 z − 2
(
1 + 0.5 z −1 )
2
1 − z −2 1 − z −2 −0.5 z −1 −0.5 z −1 .
H (z) = = + = (−2 z ). + 2 z −1
( ) ( ) ( ) ( ) ( )
2 2 2 2 2
1 + 0.5 z −1 1 + 0.5 z −1 1 + 0.5 z −1 1 − (−0.5) z −1 1 − ( −0.5) z −1
(iii) X ( z ) = 1 . Using the convolution property, the output for the unit step function is given by
1 − 0.5 z −1
1 − z −2 k1 k2 k3
Y ( z ) = X ( z ) H ( z) = ≡ + +
(1 − 0.5z )(1 + 0.5z ) 1 − 0.5 z −1 1 + 0.5 z −1 1 + 0.5 z −1 ( )
2 2
−1 −1
where
⎡ ⎤
1 − z −2 3
k1 = ⎢ ⎥ =−
(
⎢ 1 + 0.5 z −1 ) ⎥
2
4
⎣ ⎦ z −1 = 2
Solutions 25
⎡ 1 − z −2 ⎤ 3
k3 = ⎢ −1 ⎥
=−
⎣1 − 0.5 z ⎦ z −1 =−2 2
(a) (b)
Fig. S13.15. (a) Impulse response function and (b) output response in Problem 13.15.
−3 / 4 13 / 4 −0.5 z −1
= + + 3 z
1 − 0.5 z −1 1 + 0.5 z −1 ( )
2
1 − (−0.5) z −1
=− { 3
4 }
(0.5) k + ( 32 k − 74 )( −0.5) k u[ k ]
= − {3(0.5) + (6k − 7)(−0.5) } u[k ]
1
4
k k
(iv) The impulse response of the system, h[ k ] = −4δ [k ] − (3k − 5)(−0.5) u[k ] , and the input signal,
k
x[k ] = ( 12 ) k u[k ] = (0.5) k u[k ] . The output signal can be calculated by applying linear convolution as
follows.
{
y[k ] = h[k ] ∗ x[ k ] = −4δ [k ] − (3k − 5)(−0.5) k u[k ] ∗ x[ k ] }
{
= −4δ [k ] ∗ x[k ] − (3k − 5)(−0.5)k u[k ] ∗ x[k ] }
∞
= −4 x[k ] − ∑ {(3m − 5)(−0.5)
m =−∞
m
}
u[k ] ⋅ x[k − m]
∞
{
= −4 x[k ] − ∑ (3m − 5)(−0.5) m ⋅ (0.5) k − m u[k − m] }
m =0
k
= −4(0.5) u[k ] − (0.5) u[k ]∑ (3m − 5)(−0.5) m (0.5) − m
k k
m =0
⎡ k
⎤
= (0.5) k u[k ] ⎢ −4 − ∑ (3m − 5)(−1) m ⎥
⎣ m =0 ⎦
Solutions 27
Therefore,
⎡ k
⎤
y[k ] = (0.5) u[k ] ⎢ −4 − ∑ (3m − 5)(−1) m ⎥
k
⎣ m =0 ⎦
⎧⎪−4 − 12 (3k − 10) k = even
= (0.5) u[k ] × ⎨
k
⎪⎩ −4 + 32 (k + 1) k = odd
⎧⎪− 12 (3k − 2) k = even
= (0.5) k u[k ] × ⎨
⎪⎩ 12 (3k − 5) k = odd
⎧⎪−(3k − 2)(0.5) k +1 u[k ] k = even
=⎨
k +1
⎪⎩ (3k − 5)(0.5) u[k ] k = odd
It is observed that the output obtained above by applying time-domain convolution is identical to that
obtained in step (iii) using the z-transform approach. ▌
28 Chapter 13
Problem 13.16
(i) x[k ] = u[k + 2] − u[k − 3] and h[k ] = u[k − 5] − u[k − 6] .
The z-transform of the input and impulse response is given by
z 2 − z −3 z −5 − z −6
X ( z) = ROC : z > 1 and H ( z ) = = z −6 ROC : z > 1 .
z −1 z −1
The output is then given by
z −4 − z −9
Y ( z) = ROC : z > 1 .
z −1
Calculating the inverse z-transform, we obtain the output
y[k ] = u[k − 4] − u[k − 9] .
(ii) x[k ] = u[k ] − u[k − 9] and h[k ] = 3− k u[k − 4] = 3−4 × 3− ( k −4) u[k − 4] .
The z-transform of the input and impulse response is given by
z − z −8 3−4 z −4
X ( z) = ROC : z > 1 and H ( z ) = ROC : z > (1/ 3) .
z −1 z − 13
The output is then given by
3−4 ( z −3 − z −12 ) 3⎡ 1 1 ⎤
Y ( z) =
( z − 1)( z − 13 )
= 3−4
( z −3
− z −12
) × −
2 ⎣ z − 1 z − 13 ⎥⎦
⎢ ROC : z > 1
1 −4 ⎡ z z ⎤
or, Y ( z) = ( z − z −13 ) ⎢ − 1⎥
ROC : z > 1
54 ⎣ z −1 z − 3 ⎦
⎡ z z ⎤
Noting that ⎡⎣1 − 3− k ⎤⎦ u[k ] ↔ ⎢ − , the output is obtained as
1⎥
⎣ z −1 z − 3 ⎦
1 1
y[ k ] = ⎡⎣1 − 3− ( k −4) ⎤⎦ u[k − 4] − ⎡⎣1 − 3− ( k −13) ⎤⎦ u[k − 13] .
54 54
(iii) x[k ] = 2 − k u[k ] = 0.5k u[k ] and h[k ] = k (u[k ] − u[k − 4])
The z-transform of the input signal is given by
z
X ( z) = ROC : z > 0.5 .
z − 0.5
The z-transform of the impulse response is given by
∞ 3
H ( z ) = ∑ k (u[k ] − u[k − 4]) z − k = ∑ kz − k = z −1 + 2 z −2 + 3z −3 ROC : z > 0
k =0 k =0
(α − 1 / α ) z
Recall that α |k | ←⎯→
Z
ROC : α < z < (1 / α) .
( z − α)( z − 1 / α)
The z-transform of the input and impulse response is given by
z − 3.75 z
X ( z) = ROC : z > 1 and H ( z ) = ROC : 0.25 < z < 4 .
z −1 ( z − 0.25)( z − 4)
The output is then given by
− 3.75 z 2
Y ( z) = ROC : 1 < z < 4 .
( z − 1)( z − 0.25)( z − 4)
By partial fraction expansion, we obtain
Y ( z ) 1.6667 0.3333 1.3333
= − −
z z −1 z − 0.25 z−4
ROC:| z| >1 ROC:| z| >0.25 ROC:| z|< 4
Problem 13.17
(i) Calculating the z-transform of the input and output, we obtain
1 1 2 − (7 /12) z −1
X ( z) = + = ROC: z > (1/ 3)
1 − (1/ 4) z −1 1 − (1/ 3) z −1 (1 − (1/ 3) z −1 ) (1 − (1/ 4) z −1 )
2 4 2 + (1/ 2) z −1
Y ( z) = − =− ROC: z > (3/ 4)
1 − (1/ 4) z −1 1 − (3/ 4) z −1 (1 − (1/ 3) z −1 )(1 − (3/ 4) z −1 )
The transfer function of the system is given by
Problem 13.18
The impulse response of the LTIC system is given by
∞
h(t ) = ∑ 0.3kT δ (t − kT )
k =0
32 Chapter 13
The impulse response includes a series of causal CT impulse functions with decaying amplitude. Note
that the input also is a train of causal impulse functions with decaying magnitude. It appears that both the
input and the system are CT representation of discrete signal and system, respectively. Therefore, it will
be easier to calculate the output in the DT domain.
To solve the problem in the discrete domain, we use the impulse transformation.
z
The equivalent DT input is given by f [k ] = 0.2 k u[k ] , with F ( z ) = .
z − 0.2
The transfer function of the equivalent DT system is given by
z
H ( z) = ROC : z > 0.3 .
z − 0.3
The z-transform of the DT output is therefore given by
z2
Y ( z) = H ( z)F ( z) = .
( z − 0.3)( z − 0.2)
Using partial fraction expansion, the output is expressed as
Y ( z) z 3 2
= = − ,
z ( z − 0.3)( z − 0.2) z − 0.3 z − 0.2
The above answer can also be obtained by using the Laplace transform in the CT domain. ▌
Problem 13.19
To determine the stability, we will assume that the systems are physically realizable, i.e., causal.
z−2
(i) H ( z) =
( z − 0.6 + j 0.8)( z 2 + 0.25)
The pole-zero plot is shown in Fig. S13.21(i). There is one zero, at z = 2, and three poles at z = 0.6 – j0.8,
±j0.5. Two poles at z = ±0.5 are inside the unit circle ( z = 0.5 ), and the pole at z = 0.6 − j 0.8 is on
the unit circle ( z = 1 ). Therefore, the system is a marginally stable system.
The pole-zero plot is shown in Fig. S13.21(ii). There is one zero at z = 1 and three poles at z = 0.5, ±j0.5.
As all poles are inside the unit circle ( z = 0.5 ), the system is absolutely stable.
(iii) z − 0.2
H ( z) =
( z + 0.1)( z 2 + 4)
Solutions 33
The pole-zero plot is shown in Fig. S13.21(iii). There is one zero at z = 0.2, and three poles at z = 0.1, ±j2.
The pole at z = 0.1 is inside the unit circle. However, the two poles at z = ± j 2 are outside the unit
circle ( z = 2 ).Therefore, the system is an unstable system.
For system (iii), by selecting the ROC, 0.1 < |z| < 2, a stable implementation of H(z) can be obtained (as
the ROC includes the unit circle). However, such an implementation will not be causal (physically
realizable). A stable and causal implementation is not possible for this transfer function.
(iv) z 2 − 2 z + 1 ( z − 1) 2
H ( z ) = z −1 − 2 z −2 + z − 3 = =
z3 z3
The pole-zero plot is shown in Fig. S13.21(iv). There are two zeros at z = 1, and three poles at z = 0. As
all three poles are inside the unit circle ( z = 0 ), the system is absolutely stable.
Problem 13.20
The frequency response of the system is given by
e jΩ 1
H (Ω) = H ( z ) z = exp( jΩ ) = = .
e + 0.1 1 + 0.1e − jΩ
jΩ
The frequency response is plotted in Figure S13.20 using the following MATLAB code. A blown-up is
also included to calculate the amplitude and phase gain at Ω = π/10.
34 Chapter 13
omega = [-pi:pi/20:pi] ;
H = 1./(1+0.1*exp(-j*omega)) ;
subplot(2,1,1), plot(omega, abs(H)), grid
xlabel('Omega') % Label of X-axis
ylabel('|H(Omega)|') % Label of Y-axis %
axis([-3.2 3.2 0.9 1.2])
print -dtiff plot.tiff % Save figure as a TIFF file
%
subplot(2,1,2), plot(omega, angle(H)), grid
xlabel('Omega') % Label of X-axis
ylabel('<H(Omega) (in rad)') % Label of Y-axis %
axis([-3.2 3.2 -0.15 0.15])
print -dtiff plot.tiff % Save figure as a TIFF file
Fig. S13.20: Amplitude and phase spectrums of the LTID system in Problem 13.20.
It is observed from the plot that |H(π/10)| = |H(0.314)| ≈ 0.913 and <H(π/10)| = <H(0.314)| ≈ 0.03 radians.
Therefore, the steady state output for the signal x[k] = 5cos(πk/10) is given by
y[k ] ≈ (5 × 0.913) cos ( πk
10
)
+ 0.03 r = 4.565 cos ( πk
10
)
+ 0.03 r . ▌
Problem 13.21
z−2
(i) H ( z ) =
( z − 0.6 + j 0.8)( z 2 + 0.25)
One zero at z = 2 and three poles at z = 0.6 − j0.8, j0.5, −j0.5
>> Z = [2];
>> P = [0.6-j*0.8 ; j*0.5 ; -j*0.5 ] ;
>> zplane(Z,P)
>> print -dtiff plot.tiff
The pole-zero plot is shown in Fig. S13.21(i). Two poles are inside the unit circle and one pole is on the
unit circle. Therefore, the system is a marginally stable system.
Note that the pole and zero at z=2 cancel each other. Therefore, there is one zero at z = 1 and three poles
at z = 0.5, j0.5, −j0.5.
>> Z = [1];
>> P = [ 0.5; -j*0.5; j*0.5];
>> zplane(Z,P);
>> print -dtiff plot.tiff;
The pole-zero plot is shown in Fig. S13.21(ii). All three poles are inside the unit circle. Therefore, the
system is absolutely BIBO stable and causal at the same time.
(iii) H ( z ) = z − 0.2
( z + 0.1)( z 2 + 4)
One zero at z = 0.2 and three poles at z = −0.1, j2, −j2. The pole-zero plot can be sketched using the
following MATLAB code.
>> Z = [0.2];
>> P = [-0.1; j*2; -j*2];
>> zplane(Z,P);
>> print -dtiff plot.tiff;
The pole-zero plot is shown in Fig. S13.21(iii). Two poles are outside the unit circle. Therefore, the
system cannot be stable and causal at the same time.
(i) (ii)
36 Chapter 13
(iii) (iv)
(v) (vi)
(iv) H ( z ) = z −1 − 2 z −2 + z −3 = z − 23z + 1
2
z
% MATLAB Prog.
Z = [1; 1];
P = [0; 0; 0];
zplane(Z,P);
print -dtiff plot.tiff;
The pole-zero plot is shown in Fig. S13.21(iv). All poles are inside the unit circle. Therefore, the system
is stable.
The pole-zero plot is shown in Fig. S13.21(v). There is a double pole on the unit circle. Therefore, the
system is unstable. Note that if it was a single pole on the unit circle, the system would have been
marginally stable.
The pole-zero plot is shown in Fig. S13.21(vi). All six poles are inside the unit circle. Therefore, the
system is stable. ▌
Problem 13.22
H ( z) z−2 z−2
(i) = =
z z ( z − 0.6 + j 0.8)( z + 0.25) z ( z − 0.6 + j 0.8)( z − j 0.5)( z + j 0.5)
2
(iii) H ( z ) = z − 0.2
z z ( z + 0.1)( z 2 + 4)
(iv) H ( z ) = z −1 − 2 z −2 + z −3 = z − 23z + 1
2
z
The partial fraction calculation is unnecessary here. The inverse Laplace transform can be directly
calculated, which yields
h[ k ] = δ [k − 1] − 2δ [k − 2] + δ [k − 3] .
Problem 13.23
The transfer functions are first expressed as a ratio of two polynomials of z −1 as follows.
bm + bm −1 z −1 + + b1 z − m +1 + b0 z − m
X ( z) = .
1 + an −1 z −1 + + a1 z − n +1 + a0 z − n
40 Chapter 13
z z −1
(i) X 1 ( z ) = =
z 2 − 0.9 z + 0.2 1 − 0.9 z −1 + 0.2 z −2
(ii) X 2 ( z ) = z z −1
=
z 2 − 2.1z + 0.2 1 − 2.1z −1 + 0.2 z −2
(iii) X 3 ( z ) = z2 + 2 z2 + 2 z −1 + 2 z −3
= 3 =
( z − 0.3)( z + 0.4)( z − 0.7) z − 0.6 z 2 − 0.19 z + 0.084 1 − 0.6 z −1 − 0.19 z −2 + 0.084 z −3
z2 + 2 z2 + 2 z −1 + 2 z −3
(iv) X 4 ( z ) = = =
( z − 0.3)( z + 0.4)2 z 3 + 0.5 z 2 − 0.08 z − 0.048 1 + 0.5 z −1 − 0.08 z −2 − 0.048 z −3
4 z −1
(v) X 5 ( z ) =
1 − 5 z −1 + 6 z −2
4 z −2 4 z −2 −4 z −3
(vi) X 6 ( z ) = = =
10 − 6( z1 + z −1 ) −(6 z − 10 + 6 z −1 ) 6 − 10 z −1 + 6 z −2
(vii) X 7 ( z ) = 2 z −2 2 z −2
=
(1 − 4 z ) (1 − 2 z ) 1 − 10 z −1 + 32 z −2 − 32 z −3
2
−1 −1
The MATLAB code is shown in Program 13.23. The impulse responses are plotted in Fig. S13.23. ▌