This document discusses the design of a column pedestal. It provides:
1) The calculated forces on the pedestal including an axial compressive force of 76.316 kN, shear force of 30.993 kN, and bending moment of 37.192 kNm.
2) The material properties used in the design including a concrete compressive strength of 18.675 MPa and reinforcing bar yield strength of 400 MPa.
3) The calculation of the required shear reinforcement based on the axial force, shear capacity of the concrete, and remaining shear force to be resisted by reinforcement. The document determines that Φ8-150 shear bars are sufficient.
This document discusses the design of a column pedestal. It provides:
1) The calculated forces on the pedestal including an axial compressive force of 76.316 kN, shear force of 30.993 kN, and bending moment of 37.192 kNm.
2) The material properties used in the design including a concrete compressive strength of 18.675 MPa and reinforcing bar yield strength of 400 MPa.
3) The calculation of the required shear reinforcement based on the axial force, shear capacity of the concrete, and remaining shear force to be resisted by reinforcement. The document determines that Φ8-150 shear bars are sufficient.
This document discusses the design of a column pedestal. It provides:
1) The calculated forces on the pedestal including an axial compressive force of 76.316 kN, shear force of 30.993 kN, and bending moment of 37.192 kNm.
2) The material properties used in the design including a concrete compressive strength of 18.675 MPa and reinforcing bar yield strength of 400 MPa.
3) The calculation of the required shear reinforcement based on the axial force, shear capacity of the concrete, and remaining shear force to be resisted by reinforcement. The document determines that Φ8-150 shear bars are sufficient.