1. Create the attached topology with IP address specified in the topology
2. In Autonomous system 65108 is-is level-2 is running 3. In Autonomous system 300 ospf area 0 is running 4. Make connection between CE-1, CE-2 and CE-3(you have to ping loopback of CE-1 from both CE-2 and CE3 and vise versa) NOTE: o All loopback interfaces are /32 and all interface IP’s are /30 o CE-1, CE-2 and CE-3 is VPN customers o User L3 VPN o Do NOT run BGP on P2 Router o Consider loopback IP’s of CE’s are LAN of customer o Customer routers do not support dynamic routing protocol o For Inter AS-options you can user either Option -A or Option B o On AS-65108 use RR for VPNV4 peering o You can use the following simulation tools o unetLAB o ENSP o GNS3