Professional Documents
Culture Documents
FTU-200 (C) Series Catalog - S PDF
FTU-200 (C) Series Catalog - S PDF
Reset Annunciator
Frequency
• Measuring range 45~65 Hz
Battery Test
• Accuracy ±0.02 Hz
Protection Function Blocking
• Reclosing / Protection (All) / Earth Protection (Earth & SEF) Energy
• A-phase, B-phase, C-phase and 3-phase
• Rollover 16-bit counter : kWh, kVARh(Import & Export)
HMI • Accuracy ±4%
Harmonics
LCD 20characters * 4 lines, LED backlight
• Ia, Ib, Ic, In and I3ph THD (%)
• Source-side Va, Vb, Vc and V3ph THD (%)
LED
• 2nd ~31st Harmonics (A, kV) Ia, Ib, Ic, In, Va, Vb, Vc
• Switch status Open. Closed, Gas low
Remote, Recloser Enable, Protection Enable, VOC (Value Of Change)
• Control status
Ground Enable, Control Lock, Select
Live line (Source/Load), FPI A/B/C/N/SEF, UV A/B/C,
• Function status
Sync. Fail, Reclosing Ready/Progress/Lockout
• Comm. status
Tx,Rx,RTS (SCADA Port), Ethernet Link, Recording
Active Tx, Rx (protection data)
• System status CPU Run, Error
Events
• Power supply status • Time tag 1ms time resolution
Ext. Power, Batt. Low, Batt. Fail, Charger Fail
• I/O events (1023) / Functional events (1023*, 30000) / System events
Button MENU/UP/DOWN/ENTER, REMOTE,
CONTROL LOCK, SELECT, OPEN, CLOSED, (255) / Fault events (255) / PQM events (255) / Demand profile I,P,Q (6143)
RESET, RECLOSER ENABLED, PROTECTION / Maximum demand profile I,P,Q (1023)
ENABLED, GROUND ENABLED, BATTERY *The feature “*” marked applies to FTU-200C model only.
TEST, LAMP TEST
Counter
Measurements • FTU Restart Count, Switch Trip (Open) Count
• Fault Count (A / B / C / N), Total Fault Count
Current
• RMS (A) & Phase Angle (Deg) a, Ib, Ic, In, I1, I2 Fault/PQM Waveform
• True RMS (A) Ia, Ib, Ic • Up to 15 waveforms are stored.(128 samples/cycle, 20 cycles)
• Data can be stored as COMTRADE file format.
• Accuracy ±1% or 1A (2~600A), ± 3% (600~12,000A)
• Reading Range 2~12,000A (External CT Ratio 1,000:1)