Professional Documents
Culture Documents
Holder of certificate:
Materialprüfanstalt für das Bauwesen (MPA BS)
Beethovenstraße 52, 38106 Braunschweig
Testing of construction products in accordance with the Construction Products Regulation (EU)
No 305/2011 to defined harmonised conditions for the marketing of construction products
(Construction Products Regulation - CPR)
The testing laboratory is permitted, without being required to inform and obtain prior approval
from DAkkS, to use standards or equivalent testing methods listed here with different issue
dates.
The testing laboratory maintains a current list of all testing methods within the flexible scope of
accreditation.
This document is a translation. The definitive version is the original German annex to the accreditation certificate. 1/29
Annex to the accreditation certificate D-PL-11267-01-01
DIN EN 932-1 Test for general properties of aggregates - Part 1: Methods for
1996-11 sampling
DIN EN 932-2 Test for general properties of aggregates - Part 2: Methods for
1999-03 reducing laboratory samples
DIN EN 1097-7 Tests for mechanical and physical properties of aggregates - Part 7:
2008-06 Determination of the particle density of filler - Pyknometer method
Corrigendum 1
2008-09
DIN 52102 Test methods for aggregates - Determination of dry bulk density
2013-10 by the cylinder method and calculation of the ratio of density
DIN 52106 Testing of aggregates - Test methods for the assessment of the
2013-12 weathering resistance
2 Concrete
DIN EN 12350-7 Testing fresh concrete - Part 7: Air content - Pressure methods
2009-08
DIN EN 12350-10 Testing fresh concrete - Part 10: Self-compacting concrete - L box
2010-12 test
DIN EN 12350-11 Testing fresh concrete - Part 11: Self-compacting concrete - Sieve
2010-12 segregation test
DIN EN 12350-12 Testing fresh concrete - Part 12: Self-compacting concrete - J-ring
2010-12 test
DIN EN 12390-1 Testing hardened concrete - Part 1: Shape, dimensions and other
2012-12 requirements for specimens and moulds
DIN EN 12390-2 Testing hardened concrete - Part 2: Making and curing specimens
2009-08 for strength tests
Corrigendum 1
2012-02
Amendment A20
2015-12
DIN EN 12390-5 Testing hardened concrete - Part 5: Flexural strength of test spec-
2009-07 imens
DIN CEN/TS 12390-9 Testing hardened concrete - Part 9: Freeze-thaw resistance - Scal-
2017-05 ing (pre-standard)
DIN EN 14488-1 Testing sprayed concrete - Part 1: Sampling fresh and hardened
2005-11 concrete
DIN EN 14488-3 Testing sprayed concrete - Part 3: Flexural strengths (first peak,
2006-09 ultimate and residual) of fibre reinforced beam specimen
DIN EN 14488-4 Testing sprayed concrete - Part 4: Bond strength of cores by direct
2008-08 tension
DIN EN 14488-7 Testing sprayed concrete - Part 7: Fibre content of fibre reinforced
2006-08 concrete
DIN EN 14651 Test method for metallic fibre concrete - Measuring the flexural
2007-12 tensile strength (limit or proportionality (LOP), residual)
DIN EN 14721 Test method for metallic fibre concrete - Measuring the fibre con-
2007-12 tent in fresh and hardened concrete
DIN EN 14845-1 Test methods for fibres in concrete - Part 1: Reference concretes
2007-09
DIN EN 14845-2 Test methods for fibres in concrete - Part 2: Effect on concrete
2006-11
RILEM TC 162-TDF Test and Design Methodes for Steel Fibre Reinforced Concrete
2000-03
DIN 52108 Testing of inorganic non-metallic materials - Wear test using the
2010-05 grinding wheel according to Böhme - Grinding wheel method
5 Grouting mortar
DIN EN 846-2 Methods of tests for ancillary components for masonry - Part 2:
2000-08 Determination of bond strength of prefabricated bed joint rein-
forcement in mortar joints
DIN EN 846-3 Methods of tests for ancillary components for masonry - Part 3:
2010-08 Determination of shear load capacity of welds in prefabricated
bed joint reinforcement
DIN EN 846-4 Methods of test for ancillary components for masonry - Part 4:
2005-01 Determination of load capacity and load-deflection characteristics
of straps
DIN EN 846-5 Methods of test for ancillary components for masonry - Part 5:
2012-11 Determination of tensile and compressive load capacity and load
displacement characteristics of wall ties (couplet test)
DIN EN 846-6 Methods of test for ancillary components for masonry - Part 6:
2012-11 Determination of tensile and compressive load capacity and load
displacement characteristics of wall ties (single end test)
DIN EN 846-7 Methods of test for ancillary components for masonry - Part 7:
2012-11 Determination of shear load capacity and load displacement char-
acteristics of shear ties and slip ties (couplet test for mortar joint
connections)
DIN EN 846-8 Methods of test for ancillary components for masonry - Part 8:
2006-10 Determination of load capacity and load-deflection characteristics
of joist hangers
DIN EN 846-9 Methods of test for ancillary components for masonry - Part 9:
2016-08 Determination of flexural resistance and shear resistance of lintels
DIN EN 846-10 Methods of test for ancillary components for masonry - Part 10:
2000-08 Determination of load capacity and load deflection characteristics
of brackets
DIN EN 846-11 Methods of test for ancillary components for masonry - Part 11:
2000-08 Determination of dimensions and bow of lintel
DIN EN 846-14 Methods of test for ancillary components for masonry - Part 14:
2012-11 Determination of the initial shear strength between the prefabri-
cated part of a composite lintel and the masonry above it
DIN EN 1343 Kerbs of natural stone for external paving - Requirements and test
2013-03 methods
Amendment A20
2014-07
DIN EN 1433 Drainage channels for vehicular and pedestrian areas - Classifica-
2005-09 tion, design and testing requirements, marking and evaluation of
conformity
here: clause 9
7 Metallic materials
DIN EN 10002-1 Metallic materials - Tensile testing - Part 1: Method of testing (at
2001-12 ambient temperature)
(withdrawn standard)
DIN EN ISO 6892-1 Metallic materials - Tensile testing - Part 1: Method of test at
2017-02 room temperature, method B
ASTM A 370a Standard test methods and definitions for mechanical testing
2013 of steel products
(Testing of mechanicals properties of steel products)
DIN EN ISO 15630-1 Steel for the reinforcement and prestressing of concrete - Test
2011-02 methods - Part 1: Reinforcing bars, wire rod and wire
here: without clause 9
DIN EN ISO 15630-2 Steel for the reinforcement and prestressing of concrete - Test
2011-02 methods - Part 2: Welded fabric
here: without clause 9
DIN EN ISO 15630-3 Steel for the reinforcement and prestressing of concrete - Test
2011-02 methods - Part 3: Prestressing steel
here: without clause12
ASTM A1061/ Standard Test Methods for Testing Multi-Wire Steel Prestressing
A1061M Strand
2016
EN 10218-1 Steel wire and wire products - General - Part 1: Test methods
2012-03
8. Cables
ETAG 013 Guideline for European Technical Approval of post tensioning kits for
2002-06 prestressing of structures
Annex B
TL Seile Verkehrsblatt Technical supplier specification for fully locked bridge rope, Minis-
Nr. B 5229 try of Transport, Roadworks Dept., Transport Gazette Doc
edition 1994 No B 5229
(according clause 3.1.5 + 5.4.1.3 and annex 2 + 9)
PTI DC.45.1-12 PTI Recommendations for Stay Cable Design, Testing and Installa-
2012 tion
DIN EN 14179-1 Glass in building - Heat soaked thermally toughened soda lime
2016-12 silicate safety glass - Part 1: Definition and description
10 Piping anchorages
11 Construction waterproofing
DIN EN 1108 Flexible sheets for waterproofing - Bitumen sheets for roof water-
1999-10 proofing - Determination of form stability under cyclical tempera-
ture changes
DIN EN 1109 Flexible sheets for waterproofing - Bitumen sheets for roof water-
2013-07 proofing - Determination of flexibility at low temperature
DIN EN 1110 Flexible sheets for waterproofing - Bitumen sheets for roof water-
2011-03 proofing - Determination of flow resistance at elevated tempera-
ture
DIN EN 1296 Flexible sheets for waterproofing - Bitumen, plastic and rubber
2001-03 sheets for roof waterprofing - Method for artificial ageing by long
term exposure to elevated temperature
DIN EN 1297 Flexible sheets for waterproofing - Bitumen, plastic and rubber
2004-12 sheets for roof waterproofing - Method of artificial ageing by long
term exposure to the combination of UV radiation, elevated tem-
perature and water
DIN EN 1548 Flexible sheets for waterproofing - Plastic and rubber sheets for
2007-11 roof waterproofing - Method for exposure to bitumen
DIN EN 1847 Flexible sheets for waterproofing - Plastics and rubber sheets for
2010-04 roof waterproofing - Methods for exposure to liquid chemicals,
including water
2000-01 mass per unit area - Part 1: Bitumen sheets for roof waterproofing
DIN EN 1928 Flexible sheets for waterproofing - Bitumen, plastic and rubber
2000-07 sheets for roof waterproofing - Determination of watertightness
DIN EN 12310-1 Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof
1999-11 waterproofing; determination of resistance to tearing (nail shank)
DIN EN 12311-1 Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof
1999-11 waterproofing; Determination of tensile properties
DIN EN 12316-1 Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof
1999-11 waterproofing; determination of peel resistance of joints
DIN EN 12317-1 Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof
1999-11 waterproofing; determination of shear resistance of joints
DIN EN 12691 Flexible sheets for waterproofing - Bitumen, plastic and rubber
DIN EN 12730 Flexible sheets for waterproofing - Bitumen, plastic and rubber
2015-06 sheets for roof waterproofing - Determination of resistance to
static loading
DIN EN 13897 Flexible sheets for waterproofing - Bitumen, plastic and rubber
2005-02 sheets for roof waterproofing - Determination of watertightness
after stretching at low temperature
DIN EN 14196 Geosynthetics - Test methods for measuring mass per unit area of
2016-08 clay geosynthetic barriers
DIN EN 14891 Liquid applied water impermeable products for use beneath ce-
2017-05 ramic tiling bonded with adhesives - Requirements, test methods,
assessment and verification of constancy of performance, classifi-
cation and marking
Annex 7 (A.7): Watertightness
DIN EN 15651-1 Sealants for non-structural use in joints in buildings and pedestri-
2017-07 an walkways - Part 1: Sealants for facade elements
DIN EN 15651-2 Sealants for non-structural use in joints in buildings and pedestri-
2017-07 an walkways - Part 2: Sealants for glazing
DIN EN 15651-3 Sealants for non-structural use in joints in buildings and pedestri-
2017-07 an walkways - Part 3: Sealants for sanitary joints
DIN EN 15651-4 Sealants for non-structural use in joints in buildings and pedestri-
DIN EN ISO 139 Textiles - Standard atmospheres for conditioning and testing
2011-10
DIN EN ISO 527-2 Plastics - Determination of tensile properties - Part 2: Test condi-
2012-06 tions for moulding and extrusion plastics
DIN EN ISO 527-3 Plastics - Determination of tensile properties - Part 3: Test condi-
2003-07 tions for films and sheets
DIN EN ISO 527-4 Plastics - Determination of tensile properties - Part 4: Test condi-
1997-07 tions for isotropic and anisotropic fibre-reinforced plastic compo-
sites
1997-10
DIN EN ISO 2813 Paints and varnishes - Determination of gloss value at 20°, 60°
2015-02 and 85°
DIN EN ISO 4624 Paints and varnishes - Pull-off test for adhesion
2016-08
DIN EN ISO 4892-3 Plastics - Methods of exposure to laboratory light sources - Part 3:
2016-10 Fluorescent UV lamps
DIN EN ISO 9864 Geosynthetics - Test method for the determination of mass per
2005-05 unit area of geotextiles and geotextile-related products
DIN EN ISO 10563 Buildings and civil engineering works - Sealants - Determination of
2017-09 change in mass and volume
DIN EN ISO 17892-1 Geotechnical investigation and testing - Laboratory testing of soil -
2015-03 Part 1: Determination of water content
DIN ISO 23529 Rubber - General procedures for preparing and conditioning test
2012-10 pieces for physical test methods
ETAG 005 Guideline for European Technical Approval of liquid applied roof
(part 1 to 8) waterproofing kit
ETAG 005-2 Part 2: Specific stipulations for Kits bases on Polymer Modified
2004-03 Bitumen
Test done according to test programme in consultation with ETA
approved bodies
ETAG 005-3 Part 3: Specific stipulations for Kits based on Glass Reinforced Re-
2004-03 silient Unsaturated Polyester Resin
Test done according to test programme in consultation with ETA
approved bodies
ETAG 005-4 Part 4: Specific stipulations for Kits on Flexible Unsaturated Polyes-
2004-03 ter
Test done according to test programme in consultation with ETA
approved bodies
ETAG 005-5 Part 5: Specific stipulations for Kits based on Hot Applied Polymer
2004-03 Modified Bitumen
Test done according to test programme in consultation with ETA
approved bodies
ETAG 005-7 Part 7: Specific stipulations for Kits based on Bitumen Emulsions
2004-03 and Solutions
Test done according to test programme in consultation with ETA
approved bodies
ETAG 005-8 Part 8: Specific stipulations for Kits based on Water Dispersable
2004-03 Polymers
Test done according to test programme in consultation with ETA
approved bodies
Richtlinie DVS 2203-2 Testing of welded joints between panels and pipes made of ther-
2010-08 moplastics - Tensile test
Richtlinie DVS 2203-5 Testing of welded joints of thermoplastics plates and tubes -
1999-08 Technological bend test
Richtlinie DVS 2203-6 Testing of joints between polymeric materials - Shear and peeling
2008-01 tests
Richtlinie DVS 2203-6 Testing of joints between polymeric materials - Torsion shear test,
Bbl. 1 radial peel test and linear shear test for sleeve welding with incor-
2016-08 porated electric heating element and heated tool sleeve welded
joints
Richtlinie DVS 2225-1 Joining of lining membranes - Made from polymeric materials (ge-
2016-09 omembranes) in geotechnical and hydraulic application - Welding,
bonding by adhesives, vulcanizing
Richtlinie DVS 2225-2 Joining of lining membranes - Made of polymer materials in ge-
1992-08 otechnical and hydraulic engineering - Site testing
Richtlinie DVS 2225-4 Welding of sealing sheets made of polyethylene (PE) for the seal-
2016-09 ing of dumps and contaminated sites
Richtlinie DVS 2226-1 Testing of fused joints on liners of polymer materials - Testing pro-
2000-09 cedure, requirements
Richtlinie DVS 2226-2 Testing of fused joints on liners of polymer materials - Lap shear
1997-07 test
12 Restoration materials
DIN EN 1931 Flexible sheets for waterproofing - Bitumen, plastic and rubber
2001-03 sheets for roof waterproofing - Determination of water vapour
transmission properties
DIN 53122-1 Testing of plastics and elastomer films, paper, board and other
2001-08 sheet materials - Determination of water vapour transmission -
Part 1: Gravimetric method
DIN EN ISO 2884-1 Paints and varnishes - Determination of viscosity using rotary vis-
2006-09 cometers - Part 1: Cone-and-plate viscometer operated at a high
rate of shear
2007-04 kits for wetroom floors and/or walls - Part 1: Liquid applied cover-
ings with or without wearing surface
Test done according to test programme in consultation with ETA
approved bodies
DIN EN 13279-2 Gypsum binders and gypsum plasters - Part 2: Test methods
2014-03
DIN EN 1767 Products and systems for the protection and repair of concrete
1999-09 structures - Test methods - Infrared analysis
DIN EN 12614 Products and systems for the protection and repair of concrete
2005-01 structures - Test methods - Determination of glass transition tem-
peratures of polymers
DIN EN ISO 1133-1 Plastics - Determination of the melt mass-flow rate (MFR) and
DIN EN ISO 1183-1 Plastics - Methods for determining the density of non-cellular plas-
2013-04 tics - Part 1: Immersion method, liquid pyknometer method and
titration method
DIN EN ISO 11357-3 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determi-
2013-04 nation of temperature and enthalpy of melting and crystallization
DIN EN ISO 11357-6 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determi-
2013-04 nation of oxidation induction time (isothermal OIT) and oxidation
induction temperature (dynamic OIT)
DIN EN 1015-1 Methods of test for mortar for masonry - Part 1: Determination of
2007-05 particle size distribution (by sieve analysis)
DIN EN 1015-2 Methods of test for mortar for masonry - Part 2: Bulk sampling of
2007-05 mortars and preparation of test mortars
DIN EN 1015-3 Methods of test for mortar for masonry - Part 3: Determination of
2007-05 consistence of fresh mortar (by flow table)
DIN EN 1015-4 Methods of test for mortar for masonry - Part 4: Determination of
1998-12 consistence of fresh mortar (by plunger penetration)
DIN EN 1015-6 Methods of test for mortar for masonry - Part 6: Determination of
2007-05 bulk density of fresh mortar
DIN EN 1015-7 Methods of test for mortar for masonry - Part 7: Determination of
1998-12 air content of fresh mortar
DIN EN 1015-9 Methods of test for mortar for masonry - Part 9: Determination of
2007-05 workable life and correction time of fresh mortar
DIN EN 1015-10 Methods of test for mortar for masonry - Part 10: Determination of
2007-05 dry bulk density of hardened mortar
DIN EN 1015-11 Methods of test for mortar for masonry - Part 11: Determination of
2007-05 flexural and compressive strength of hardened mortar
DIN EN 1015-12 Methods of test for mortar for masonry - Part 12: Determination of
2016-12 adhesive strength of hardened rendering and plastering mortars on
substrate
DIN EN 1015-18 Methods of test for mortar for masonry - Part 18: Determination of
2003-03 water absorption coefficient due to capillary action of hardened
mortar
DIN EN 1015-19 Methods of test for mortar for masonry - Part 19: Determination of
2005-01 water vapour permeability of hardened rendering and plastering
mortars
DIN EN 1052-3 Methods of test for masonry - Part 3: Determination of initial shear
2007-06 strength
DIN EN 13892-1 Methods of test for screed materials - Part 1: Sampling, making and
2003-02 curing specimens for test
DIN EN 13892-2 Methods of test for screed materials - Part 2: Determination of flex-
2003-02 ural and compressive strength
DIN EN 13892-8 Methods of test for screed materials - Part 8: Determination of bond
2003-02 strength
DIN 18560-2 Floor screeds in building construction - Part 2: Floor screeds and heat-
2009-09 ing floor screeds on insulation layers,
Corrigendum 1 here: clause 6
2012-05
DIN 52108 Testing of inorganic non-metallic materials - Wear test using the grind-
2010-05 ing wheel according to Böhme - Grinding wheel method
DIN EN 492 Fibre-cement slates and fittings - Product specification and test methods
2016-12
DIN EN 12467 Fibre-cement flat sheets - Product specification and test methods
2016-12
The requirements for a testing laboratory are fulfilled according to article 43 of the Construction Prod-
ucts Regulation. Testing methods, which are necessary for determining the product type and cannot be
executed by the holder of the certificate, are described in the list of subcontractors.
Without prior approval by the DAkkS German Accreditation Body, the testing laboratory body is per-
mitted to use new revisions of product standards.
Abbreviations used:
ASTM American Society for Testing and Materials
DAfStb Deutscher Ausschuss für Stahlbeton, Berlin (German Committee for
Reinforced Concrete)
DASt Deutscher Ausschuss für Stahlbau
(German Committee for steel building)
DBV Deutscher Betonverein e. V., Wiesbaden
(German Concrete and Construction Technology Association)
FIP Fédération Internationale de la Précontrainte
NEN Nederlands Normalisatie-Instituut
PA Internal test procedure
ÖNORM Austrian Standard
RAL RAL Deutsches Institut für Gütesicherung und Kennzeichnung e.V.
RILEM Réunion Internationale des Laboratoires d’Essais
et de Recherches sur les Matériaux et les Constructions
SEW Stahl-Eisen-Werkstoffblatt des Vereins Deutscher Eisenhüttenleute
SIA Swiss Society of Engineers and Architects (SIA)
TP Min-StB Technische Prüfvorschriften für Mineralstoffe im Straßenbau, Hrsg.
von der Forschungsgesellschaft für Straßen- und Verkehrswesen, Ar-
beitsgruppe Mineralstoffe im Straßenbau
UEAtc Union Europenne pour l’Agrément technique dans la construction