Professional Documents
Culture Documents
A. marking tools
B. measuring tools
C. clamping tools
ANSWER: A
2) This hammer, used for shaping metal, is also known as a blacksmith's hammer:
A. ball peen hammer
B. tack hammer
C. mallet
ANSWER: C
4) This tool has a sharp metal point for marking on wood, metal and plastic:
A. scribe
B. center punch
C. file
ANSWER: A
6) The hand saw that makes a cut parallel with the grain of the wood is:
A. rip saw
B. crosscut saw
C. keyhole saw
ANSWER: A
7) This paddle shaped drill bit, for wood and some plastics, must be used in power
drills or drill presses:
A. auger bit
B. spade bit
C. twist-drill bit
11) This hand tool consists of a hole-punch, a small anvil and a crimping tool:
A. wire crimper
B. wire strippers
C. Grommet
ANSWER: C
13) This power-driven handheld shaping tool carves designs from the surface or edge
of wood using a chisel-like bit.
A. cut-awl
B. wood lathe
C. Router
ANSWER: A
14) This power handsaw is used for making curvilinear cuts in wood.
A. circular saw
B. saber saw
C. radial arm saw
16) This type of fastener is best used when you want the strongest mechanical
fastening.
A. screws
B. nails
C. bolts
ANSWER: C
19) A flat chisel being used for aluminum should have a point angle of
A. 30 degrees
B. 65 degrees
C. 55 degrees
ANSWER: A