You are on page 1of 14

DYEING OF

FABRICS.

AN INVESTIGATORY PROJECT

FOR CLASS-12, CHEMISTRY.


K.V ITARANA ALWAR,

RAJASTHAN.

PREPARED BY:Rajan upadhyay

TEACHERS NAME:Sir Mahendra

Kalra

SESSION:2019-20

BIODATA

NAME- RAJAN UPADHYAY

CLASS/SECTION- 12 "A"
NAME OF EXAM BOARD-CBSE

ROLL NO.- 19

SUBJECT- CHEMISTRY

TOPIC- DYING OF FABRIC

TEACHERS NAME-MAHENDRA

KALRA

SCHOOL- KV ITARANA ALWAR


SESSION-2019-20

CONTENTS

SL.N0. TOPIC

1. ACKNOWLEDGEMENT

2. INTRODUCTION

3. TYPES OF DYES

4. CHARACTERISTICS

5. OF DYES.

OBJECTIVES AND

REUIREMENTS
6.
7. PROCEDURE

8. OBSERVATIONS

9. BIBLIOGRAPHY

THANKYOU.

ACKNOWLEDGEMENT

I would like to express my special thanks of gratitude to my


teacher as well as our principal who gave me the golden
opportunity to do this wonderful project on the topic , which
also helped me in doing a lot of Research and i came to know
about so many new things I am really thankful to them.
Secondly i would also like to thank my parents and friends who
helped me a lot in finalizing this project within the limited time
frame.

INTRODUCTION

Dyes are coloured substances which can adhere to the surface of

materials and are used to give colours to paper, food stuffs and

various other textiles such as cotton, wool, synthetic fibres, silk,

etc. Chemically a dye contains:

1)Some group which is responsible for the colour of the dye.

2)Some group which makes the dye stick to the fabric by

formation of some salt.


The dyed fabrics appear to be coloured because a particular dye

absorbs radiations of some specific wavelengths from the visible

spectrum of light. The remaining radiations of light are reflected .

TYPES OF DYES.
• Acid dyes are water-soluble anionic dyes that are applied
to fibers such as silk, wool, nylon and modified acrylic
fibers using neutral to acid dye baths. Attachment to the
fiber is attributed, at least partly, to salt formation
between anionic groups in the dyes and cationic groups in
the fiber. Acid dyes are not substantive to cellulosic fibers.
Most synthetic food colors fall in this category.Examples
of acid dye are Alizarine Pure Blue B, Acid red 88 etc.

• Basic dyes are water-soluble cationic dyes that are


mainly applied to acrylic fibers, but find some use for
wool and silk. Usually acetic acid is added to the dye bath
to help the uptake of the dye onto the fiber. Basic dyes
are also used in the coloration of paper.

• Direct or substantive dyeing is normally carried out in a


neutral or slightly alkaline dye bath, at or near boiling
point, with the addition of either sodium chloride (NaCl)
or sodium sulfate (Na2SO4) or sodium
carbonate (Na2CO3). Direct dyes are used on cotton,
paper, leather, wool, silk and nylon. They are also used
as pH indicators and as biological stains.

• Mordant dyes require a mordant, which improves the


fastness of the dye against water, light and perspiration.
The choice of mordant is very important as different
mordants can change the final color significantly. Most
natural dyes are mordant dyes and there is therefore a
large literature base describing dyeing techniques. The
most important mordant dyes are the synthetic mordant
dyes, or chrome dyes, used for wool; these comprise some
30% of dyes used for wool, and are especially useful for
black and navy shades. The mordant, potassium
dichromate, is applied as an after-treatment. It is
important to note that many mordants, particularly
those in the heavy metal category, can be hazardous to
health and extreme care must be taken in using them.

• Vat dyes are essentially insoluble in water and incapable


of dyeing fibres directly. However, reduction in alkaline
liquor produces the water-soluble alkali metal salt of the
dye, which, in this leuco form, has an affinity for the
textile fibre. Subsequent oxidation reforms the original
insoluble dye. The color of denim is due to indigo, the
original vat dye.
• Reactive dyes utilize a chromophore attached to
a substituent that is capable of directly reacting with the
fiber substrate. The covalent bonds that attach reactive
dye to natural fibers make them among the most
permanent of dyes. "Cold" reactive dyes, such as Procion
MX, Cibacron F, and Drimarene K, are very easy to use
because the dye can be applied at room temperature.
Reactive dyes are by far the best choice for
dyeing cotton and other cellulose fibers at home or in the
art studio.

• Disperse dyes were originally developed for the dyeing


of cellulose acetate, and are water-insoluble. The dyes are
finely ground in the presence of a dispersing agent and
sold as a paste, or spray-dried and sold as a powder.
Their main use is to dye polyester, but they can also be
used to dye nylon, cellulose triacetate, and acrylic fibers.
In some cases, a dyeing temperature of 130 °C (266 °F)
is required, and a pressurized dyebath is used. The very
fine particle size gives a large surface area that aids
dissolution to allow uptake by the fiber. The dyeing rate
can be significantly influenced by the choice of dispersing
agent used during the grinding.

• Azoic dyeing is a technique in which an insoluble Azo


dye is produced directly onto or within the fiber. This is
achieved by treating a fiber with both diazoic and
coupling components. With suitable adjustment of
dyebath conditions the two components react to produce
the required insoluble azo dye. This technique of dyeing is
unique, in that the final color is controlled by the choice
of the diazoic and coupling components. This method of
dyeing cotton is declining in importance due to the toxic
nature of the chemicals used.

• Sulfur dyes are inexpensive dyes used to dye cotton with


dark colors. Dyeing is effected by heating the fabric in a
solution of an organic compound, typically a nitrophenol
derivative, and sulfide or polysulfide. The organic
compound reacts with the sulfide source to form dark
colors that adhere to the fabric. Sulfur Black 1, the
largest selling dye by volume, does not have a well
defined chemical structure

on. CHARACTERISTICS OF A DYE:

• It must have a suitable colour.

• It must be capable of being fixed to the material.

• When fixed, it must be fast enough to detergents, soaps,

water, dry cleaning solvents, light and dil. Acids.

OBJECTIVE AND THEORY:

To dye wool and cotton clothes with malachite green.


Requirements:

500 ml beakers, tripod stands, wire gauze, glass rod, spatula,

wool cloth, cotton cloth.

Sodium carbonate, tannic acid, tartaremetic and malachite

green.

Procedure:

• PREPARATION OF SODIUM CARBONATE SOLUTION-

Take about 0.5g of solid Na2CO3 and dissolve it in 250ml

of water.

• PREPARATION OF TARTAREMETIC SOLUTION- Take

about 0.2g of tartaremetic and dissolve in 100ml of

water by stirring with the help of a glass rod.

• PREPARATION OF TANNIC ACID SOLUTION- Take

100ml of water and add about 1g of tannic acid to it.

Heat the solutiON

• PREPARATION OF DYE SOLUTION- Take about 0.1g of

malachite green dye and add to it 400ml of water. On

warming a clear solution of the dye results.

• DYEING OF WOOL- Take about 200ml of dye solution

and dip it in the woolen cloth to be dyed. Boil the


solution for about 2 minutes. After that remove the cloth

and wash it with hot water 3-4 times, squeeze and keep

it for drying.

• DYEING OF COTTON- Cotton doesn’t absorb malachite

green readily. So it requires the use of mordant. For

dyeing a cotton cloth, dip it in NA2CO3 solution for about

10 minutes and then rinse with water. Then put the

water in hot tannic acid solution for about 5 minutes.

Now take out the cloth from tannic acid solution and

keep it in tartaremedic solution for about 5 minutes.

Remove the cloth and squeeze it with spatula to remove

the excess solution. Now place the cloth in boiling solution

of the dye for about 2 minutes. Remove and wash the

dyed cloth thoroughly with water, squeeze and keep it for

drying.

OBSERVATION:

• The colour of the wool cloth dyed directly by dipping in

the hot solution of malachite green is fast.

• The colour of the cotton cloth dyed indirectly by using

mordant and then by dipping in the hot solution of


malachite green is fast to washing and of high intensity.

BIBLIOGRAPHY

• Practical chemistry by laxmi publications.

• Wikipedia

• Google

• Chemlab.com

• Chemistry ncert book.

• Fellow students and teachers.

You might also like